BL480ME
OWNER’S GUIDE
www.ninjakitchenme.com
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
YOUR NUTRI NINJA™ WITH AUTO-IQ™.
WARNING: Extension cords are not
recommended for use with this product.
WARNING: The blades are not
affixed to the unit. They are removable
and very sharp. Handle with care!
CAUTION: ln order to avoid a
hazard due to inadvertent resetting of
the thermal cut-out, this appliance must
not be supplied through an external
switching device, such as a timer, or
connected to a circuit that is regularly
switched on and off by the utility.
IMPORTANT: This appliance is not
intended for use by persons with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children shall not use or play with this
appliance. Close supervision is necessary
to keep appliance and cord out of reach of
children during use.
1
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR INJURY:
1
WARNING: Remove utensils prior to
processing. Failure to remove may cause
the jar to be damaged or to shatter which
may cause personal injury.
2
CAUTION: Do not blend hot liquids, doing
so may cause excessive pressure build-up,
resulting in risk of the user being burned.
3
CAUTION: We do not recommend
grinding in any of our Nutri Ninja Cups.
4
CAUTION: Remove the Pro Extractor
Blades™ Assembly from the cup upon
completion of blending. Some ingredients
have the potential to expand after blending
resulting in excessive pressure buildup that
can pose a risk of injury.
5
CAUTION: Do not blend dry ingredients
unless pulsing for short intervals per the
instructions. Continuous blending dry
ingredients will overheat the blender.
6 To protect against electrical shock, do not
submerge the appliance or allow the power cord
to come into contact with water or any other
liquid.
7 DO NOT allow the appliance to be used by
children. Close attention is necessary when used
near children. This is not a toy.
8 Never leave an appliance unattended when in use.
9 Turn the appliance off and remove the power cord
from the electrical outlet when not in use, before
assembling or disassembling parts, accessing
parts that move while in use and before cleaning.
To unplug, grasp the plug and pull from the
electrical outlet. Never pull from the power cord.
10 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it to
disconnect from electrical outlet; instead, grasp
the plug and pull to disconnect.
11 DO NOT USE if the appliance is not working, has
been dropped, dropped into water, damaged or
left outdoors.
12 NO SERVICEABLE PARTS. Incorrect reassembly or repair can cause a risk of electrical
shock or injury to persons when the appliance is
used. Contact Customer Service or Service Center
for the repair or replacement under the warranty
agreement.
13 If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
14 DO NOT let the power cord hang over the edge of
table or counter or touch hot surfaces such as the
stove.
15 Always use the appliance on a dry, level surface.
16 Keep hands, hair, clothing, as well as utensils
out of container while processing or blending
to reduce the risk of severe injury to persons or
damage to the appliance. A scraper may be used
but only when the appliance is not running.
17 Avoid contact with moving parts.
18 DO NOT attempt to sharpen blades.
19 DO NOT use the appliance if Pro Extractor Blades
Assembly is bent or damaged.
20 To reduce the risk of injury, never place the
Blade Assembly on the base without the proper
attachment.
21 DO NOT operate this appliance on or near any hot
surfaces (such as gas or electric burner or in a
heated oven).
22 The use of attachments or accessories
including canning jars, not recommended by the
manufacturer may result in fire, electric shock or
personal injury.
23 DO NOT remove any container from the motor
base while the appliance is in operation. Always
unplug the unit when not in use.
24 To reduce the risk of injury, NEVER operate the
appliance without the blade assembly in place; DO
NOT try to defeat the interlock mechanism; make
sure that the attachment is properly installed
before operating the appliance.
25 DO NOT expose containers to extreme
temperature changes.
26 DO NOT overfill. Do not exceed “MAX” fill line.
27 DO NOT operate the appliance empty.
28 If the appliance overheats, a thermal switch will
become activated and shut off the motor. To reset,
unplug the appliance and let it cool down for
approximately 30 minutes before using again.
29 To reduce the risk of burns, always allow the
appliance to cool before taking off parts and
before cleaning.
30 Max ON time is 1 minute under 1000W load. If
the appliance overheats, a thermal switch will
become activated and shut off the motor. To reset,
unplug the appliance and let it cool down for
approximately 30 minutes before using again.
31 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended use.
Do not use outdoors.
32 Appliance accessories are not intended to be used
in the microwave as it may result in damage to the
accessories.
SAVE THESE
INSTRUCTIONS
www.ninjakitchenme.com
2
THIS BOOK COVERS MODEL NUMBERS:
BL480ME 30
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50/60Hz
Power:
1000 Watts
Nutri Ninja™ Cup Capacity:900 ml
650 ml
3
Contents
Thank you for
purchasing the
Nutri Ninja™
with Auto-iQ™
Getting to Know Your Nutri Ninja with Auto-iQ����������������������������������������������������������������������5
Before First Use ����������������������������������������������������������������������������������������������������������������7
Use of the Nutri Ninja Cups�������������������������������������������������������������������������������������������������8
Suggested Uses�����������������������������������������������������������������������������������������������������������������9
Care & Maintenance��������������������������������������������������������������������������������������������������������10
Troubleshooting Guide������������������������������������������������������������������������������������������������������11
www.ninjakitchenme.com
4
Getting To Know Your Nutri Ninja™ with Auto-iQ™
a
b
c
d
e
a900 ml Nutri Ninja Cup
b 650 ml Nutri Ninja Cup
5
c Pro Extractor Blades™ Assembly
d Sip & Seal™ Lid
e Motor Base
Welcome to the Ninja™ Auto-iQ™ Experience! The Nutri Ninja™ with Auto-iQ features pre-programmed settings that take
the guesswork out of drink and meal making. These programs are timed to deliver consistent, delicious results that
finish on their own so all you have to do is press a button and enjoy!
FEATURES:
• Nutrient & Vitamin Extraction*
• 1000 Watt Motor
• User Interface:
START | STOP
Press once to start continuous running, press again to stop
Timer counts up by seconds, up to 60 seconds
PULSE
Runs only while pressed down. Short presses make short pulses.
Timer counts up by seconds as long as pressed down
AUTO-IQ BLEND
Pulses and blends fresh or softer ingredients to create smooth consistent results. Timer counts down.
UTO-IQ ULTRA BLEND
A
Pulses and blends fozen, fibrous or hard ingredients to create smooth consistent results. Timer counts down.
• Personalised, healthy drinks and juices
•Sip & Seal™ lids for drinks on the go
• Nutri Ninja Cups, BPA free
• Cord storage
*Extract a drink containing vitamins and nutrients from fruits and vegetables.
www.ninjakitchenme.com
6
Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base is
plugged in for use.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it may
result in damage to the accessories.
CAUTION: Do not immerse the motor base into
water or any other liquid.
1 Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2 Wash the lids, cups, and Pro Extractor Blades™
Assembly in warm, soapy water. When washing the Pro
Extractor Blades Assembly, use a dish-washing utensil
with a handle to avoid direct hand contact with blades.
CAUTION: Handle the Pro Extractor Blades
Assembly with care when washing, as the blades
are sharp.
3 Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4 Cups, lids and Pro Extractor Blades Assembly are all
dishwasher safe. It is recommended that the lids and
blade assemblies be placed on the top rack. Ensure
that the blade assembly is removed from the containers
before placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
7
Use of the Nutri Ninja™ Cups
WARNING: Handle the Pro Extractor Blades™ Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of
the user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
IMPORTANT: When processing soft dry ingredients such as day-old bread or cheese use quick, short 1
second pulses. Do not overfill to avoid overheating the appliance. Allow the appliance to cool after each use.
ASSEMBLY
or
USE
REMOVAL
or
Fig. 1
Fig. 2
Fig. 3
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3 Make sure that the motor base is plugged in for use.
Lights will not yet illuminate.
4 Add ingredients to the cup.
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “MAX” fill line.
5 Place the Pro Extractor Blades Assembly onto the cup
and twist it on tightly until you have a good seal.
(Fig. 1)
6 Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base.
Turn it clockwise, until you feel it click into place. The
Timer light will illuminate. (Fig. 2)
7 Press one of the buttons to activate. (Fig. 3)
Fig. 4
Fig. 5
NOTE: When using the Auto-iQ™ presets, the unit will
operate using pulses, pauses and continuous runs. The
pauses allow the contents of the cup to settle. When
the timer reaches “0”, it will stop by itself.
8 To remove the cup, ensure that the motor has stopped
running. Then turn the cup anticlockwise (Fig. 4) and
pull straight up to remove. (Fig. 5)
9 Turn the cup upright and remove the Pro Extractor
Blades Assembly by twisting the Pro Extractor Blades
Assembly anticlockwise. Be sure to store the Pro
Extractor Blades Assembly attached to an empty cup
when not in use.
10 Twist the Sip & Seal™ lid onto the cup to enjoy your
drink on the go. Press flip top cap firmly into the
opening to get the best seal. The flip top cap locks open
when pressed backward.
11 Make sure that the motor base is unplugged when not
in use.
12 To remove the motor base unit, tip the unit forward
from the rear to easily disengage the suction cups.
www.ninjakitchenme.com
8
Suggested Uses
PURPOSE / FUNCTION
SUGGESTED CUP
TYPE OF FOOD
Chopping / Pulsing
650 ml Nutri Ninja™ cup
900 ml Nutri Ninja cup
Salsa
Leafy Herbs
Grating
650 ml Nutri Ninja cup
900 ml Nutri Ninja cup
Cheese
Breadcrumbs
Mixing
650 ml Nutri Ninja cup
900 ml Nutri Ninja cup
Batters
Dips
Sauces*
650 ml Nutri Ninja cup
900 ml Nutri Ninja cup
Vinaigrettes
Salad Dressings
Simple Sauces*
Frozen Blending
650 ml Nutri Ninja cup
900 ml Nutri Ninja cup
Ice
Frozen Fruit
Ice Cream
Nutrient Juices/Smoothies
650 ml Nutri Ninja cup
900 ml Nutri Ninja cup
Fruits
Vegetables
Leafy Greens
CAUTION: DO NOT process dry ingredients without adding liquid to the cup. This product is not intended for
dry blending.
* When blending sauces, make sure they’re cooled to room temperature first - Ninja™ containers are not intended for hot
blending.
FILLING YOUR NUTRI NINJA
Want to create smooth and delicious drinks using your Nutri Ninja cups? Simply add ingredients to the container in the order
they appear in each recipe, or follow the guideline below when creating your own customized recipes. (Fig. 1)
ice,
frozen ingredients
powders,
nut butters
liquids, yogurt
leafy greens,
herbs
fresh fruits,
veggies
Fig. 1
9
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2 Hand Washing: Wash containers, lids, and blades
assemblies in warm, soapy water. When washing the Pro
Extractor Blades Assembly, use a dish-washing utensil
with a handle to avoid direct hand contact with blades.
Handle the blades assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
Dishwasher: Containers, lids, and blades assemblies
are all dishwasher safe. The lids and blade assemblies
are top rack dishwasher safe. Ensure that the blade
assemblies are removed from the containers before
placing in the dishwasher.
WARNING: Handle the Pro Extractor Blades
Assembly with care when washing, as the blades
are sharp. Contact with the blades’ edges can
result in laceration.
3 Wipe the motor base clean with a damp cloth.
If the appliance needs servicing, please contact
customer service at support@ninjakitchenme.com
HOW TO STORE
1 Store the Nutri Ninja™ with Auto-iQ™ upright with
the blade assembly inside the corresponding container
with the lid secured on top. Do not place anything on
top. Store the rest of the attachments in a safe place
where they will not be damaged and won't cause
harm. Secure the power cord underneath the base by
wrapping the cord around the cord wrap.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja with Auto-iQ features a unique safety
system which prevents damage to the unit’s motor
and drive system should you inadvertently overload
your appliance. If the appliance is being overloaded,
the motor will stop. To reset the appliance, follow the
resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the cup and ensure that no food is
jamming the blade assemblies.
3 Allow the appliance to cool for approximately 30
minutes.
4 Re-install the cup onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before while making
sure not to exceed the recommended maximum
capacities.
www.ninjakitchenme.com
10
Troubleshooting Guide
PROBLEMS
Unit doesn't turn on
Unit doesn't turn off
Lid/blade assembly hard to
assemble
Food is not evenly chopped
POSSIBLE REASONS & SOLUTIONS
• Make sure the unit is plugged in
• Insert and rotate cup clockwise in the base until it "clicks". Display should
turn on.
• Remove cup from base by rotating cup anticlockwise and lifting out.
Display should turn off. Unplug the power cord from the outlet.
• Set the cup on a level surface. Place the lid or blade assembly on the top
of the cup and align the threads so that the lid/blades sit flat on the cup.
Twist clockwise so that the lid/blades evenly align to the cup until you
have a tight seal.
• For best results when chopping, make sure all ingredients are as dry as
possible. Cut pieces down to even sizes, and reduce the amount of food
in the cup. Use very short pulses by quickly pressing the "PULSE" button.
• Using the Auto-iQ™ programs is the easiest way to achieve great results.
Doesn't mix well, food gets
stuck
The pulses and pauses allow the food to settle towards the blade. If food
is routinely getting stuck adding some liquid will usually help.
• When packing the cups, start with fresh items, then powders/nuts. Add
liquids, and finally frozen items or ice.
• Make sure surface and suction feet are wiped clean. Suction feet will only
Motor base won’t stick to
counter or table top
stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces such
as, wood, tile and non-polished finishes.
• DO NOT attempt to use appliance when the motor base is stuck to a surface
that is not secure, (cutting board, platter, plates, etc.).
Unit is difficult to remove
from counter for storage
11
• Tip unit forward from the back to easily disengage the suction feet.
Notes
www.ninjakitchenme.com
12
Notes
13
TWO (2) YEAR LIMITED WARRANTY
Carlton Brands FZC warrants this product to be free from material defects and workmanship for a period of two
(2) years from the date of purchase when utilised for normal household use, subject to the following conditions,
exclusions and exceptions.
•
The liability of Carlton Brands FZC is limited solely to the cost of the repair or replacement of the unit at our
option.
•
The guarantee does not cover products and/or product parts that are subject to normal wear that can be
considered as consumable parts by their nature or that are made of glass.
•
The warranty is void if any unit is tampered with or used for commercial purposes.
•
The warranty is not valid if a defect is due to damage caused by incorrect use, poor maintenance, faulty
packaging, mishandling in transit, or if service, alterations or repairs have been carried out by persons not
authorised by Carlton Brands FZC.
•
For the appliance to be used correctly, the user should strictly adhere to all instructions included in the
Owner’s Guide and should refrain from any actions or uses which are warned against in the Owner’s Guide.
SUPPORT
If your appliance fails to operate properly while in use under normal household conditions within the warranty
period, return the complete appliance and accessories to the customer service department at the point of purchase. If the appliance is found to be defective in material or workmanship, the unit will be repaired or replaced
free of charge and can be collected from the point of purchase. For assistance with warranty, service options or
customer support, please visit our website: www.ninjakitchenme.com or email: support@ninjakitchenme.com
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/
or conversional warranties.
*IMPORTANT: Carefully pack all contents of the product to avoid damage in shipping. Be sure to
include proof of purchase date and to attach tag to them before packing with your name, complete
address and phone number with a note giving purchase information, model number and what you
believe is the problem with the item.
www.ninjakitchenme.com
14
Manufacturer:
SharkNinja Operating LLC
180 Wells Avenue Suite 200, Newton
MA 02459
United States of America
Importer & Customer Service:
Carlton Brands FZC
Office No. 4
18th Street,
Behind Home Center,
Dubai
United Arab Emirates
www.ninjakitchenme.com
email: support@ninjakitchenme.com
Copyright © 2016 SharkNinja Operating LLC
Auto-iQ, Nutri-Ninja, Ninja, Pro Extractor Blades,
Sip & Seal and Total Crushing are trademarks of
SharkNinja Operating LLC.
Printed in China
Illustrations may differ from actual product. We are constantly striving to
improve our products, therefore the specifications contained herein are subject
to change without notice.
BL480ME_30_IB_E_160317_1_V1
Download PDF
Similar pages