Cable entry plates
for cables without plugs
58
Overview
Cable entry plate KDP
plastic, rectangular
The rectangular cable entry plate type KDP 24 for
cut-outs with 24-pole connectors is a real alternative to cable fitting.
Page 61
Cable entry plate KDP
plastic, round
The round cable entry plate type KDP/R for direct
assembly in housing cut-outs is a real alternative
to cable fitting.
Page 79
Cable entry plate KDP
metal, rectangular
The metal KDP is another version of the KDP
series. The stainless steel version is particularly
suitable for application in the food and chemical
areas.
Page 87
Cable entry plate KDP/BG-FB
plastic bus enclosure
Complete bus enclosure with integrated cable
entry plate, pre-installed top hat rail and transparent cover.
Page 117
Cable entry plate KDP/BG
plastic Rose enclosure
The cable entry plates type KDP/BG have been
specially developed for Rose enclosures. Extremely
quick and easy assembly.
Page 123
Accessories for cable entry systems/
panels KDL/KDP
Under accessories you will find various blanking
plates, adapter plates for cut-out reduction and
discharge plates for EMC applications.
Page 129
59
60
Cable entry plate KDP
plastic rectangular
61
Cable entry plate KDP
plastic rectangular
Advantages
Straight in!
22 cables
installed
in approx.
2 minutes
10 times faster and with a simultaneous space saving of up
to 50 % compared with conventional cable fittings.
Take advantage of these huge
potential savings. The plastic
KDP/N 24 is simply clicked into
the cut-outs for 24-pole connectors and the cable is then
pushed through – and the cable
insertion is already done!
The cable entry plate is an entry
and fastening system for electric conduits and pneumatic
hoses such as those used in
control cabinet, plant or machine construction. Wherever
quick assembly, cable-protecting and high packing density
are required, the cable insertion
system is used.
62
✔Enormous time savings
during assembly
✔Extremely low space requirement
✔High packing density
✔Assembly without tools
✔High protection class
✔No kinks in cables and tubes
Overview
Cable entry plate KDP/N 24
The square cable entry plates KDP/N 24 are a
second generation extension of the square cable
entry plate KDP 24. The advantage lies in the
simple assembly with fastening
by means of catch hooks.
Page 68
Cable entry plate KDP 24-Multi
The cable entry plates, type KDP 24-Multi are a
combination of our KDP system and our cable
entry strips KDL/E. They take up to four preassembled cables in two grommets.
Page 70
Snap-on mounting
Screw-on mounting
Detailed construction and assembly instructions
for the snap-on/screw-on fittings.
Page 72
63
Cable entry plate KDP
plastic rectangular
Selection table KDP/N (possible combinations of cable entries)
The plastic cable entry plates type KDP/N 24 are the further developed, second generation of our successful cable entry plates with improved clip-in
function.
It enables tool-less, rational connection technology for the wiring of machines
and equipment with the high IP class 65. It is used wherever the rapid and
economical introduction of a large number cables and/or pneumatic hoses is
necessary.
Number of openings on the cable entry plate
corresponds to cable diameter
Ø mm
Ø mm
Ø mm
Ø mm
Ø mm
Ø mm
1.5–2.6 2.5–5.0 3.0–5.5 3.0–6.5 4.1–8.1 5.0–9.2
KDP/N 24/11
4
Item no. 87301110
KDP/N 24/13
2
Item no. 87301130
4
6
6
4
KDP/N 24/17
17
Item no. 87301150
11
KDP/N 24/22
1
16
Item no. 87301160
4
23
KDP/N 24/29
29
Item no. 87301180
78
64
2
They are a real alternative to standard cable fittings. The sizes correspond to
standard cut-outs of 24-pole connectors from Harting and Wieland. Assembly
at the cut-out due to easy clip-in action thanks to catch hooks or screws.
Number of openings on the cable entry plate
corresponds to cable diameter
Ø mm
Ø mm
Ø mm
8.0–12.0
8.0–12.5
9.0–14.0
Ø mm
Ø mm
9.6–15.9 14.0–20.0
3
KDP/N 24/12
12
Item no. 87301120
4
1
4
5
KDP/N 24/14
Item no. 87301140
KDP/N 24/17-1
Item no. 87301151
2
KDP/N 24/23
Item no. 87301170
KDP/N 24/80
Item no. 87301190
65
Cable entry plate KDP
plastic rectangular
Selection table KDP-Multi (possible combinations of cable entries)
The cable entry plates, type KDP 24-Multi are a combination of our KDP/N
system and our cable entry strips KDL/E. They are ideal for situations where
a few cables with plugs have to be entered into the switch cabinet next to
cables without plugs. These cable entry plates take up to four pre-assembled
cables with diameters of 3.0 to 16.0 in two grommets.
Number of openings on the cable entry plate
corresponds to cable diameter
Ø mm
Ø mm
Ø mm
Ø mm
Ø mm
Ø mm
1.5–3.5 2.5–5.0 3.0–5.0 3.0–6.5 4.5–8.5 8.0–12.5
KDP 24/10/02
Item no. 87301076
KDP 24/14/02
4
Item no. 87301078
KDP 24/15/02
Item no. 87301080
2
KDP 24/21/02
Item no. 87301086
66
2
8
17
Item no. 87301082
Item no. 87301084
2
11
KDP 24/17/02
KDP 24/20/02
4
4
6
21
10
4
2
Material data KDP/N and KDP-Multi
Halogen-free
Phosphorous-free
Cadmium-free
Asbestos-free
Lead-free
Silicone-free
The cable entry plates types KDP/N and
KDP-Multi comply with ROHS and feature
IP class 65 (KDP-Multi: IP 54).
Additionally all components are free of
halogen, phosphorous, cadmium, asbestos, lead and silicone.
It can be used within a temperature
range of -30 to 70 °C.
The frames of KDP/N and KDP-Multi are
inspected according to fire classification V0.
They are made of polyamide 6.6, the
sealant plates used are made of TPU/
NBR/EPDM.
UR approvals as well as approvals for
the German and French railways exist
for KDP/N.
67
Cable entry plate KDP
plastic, rectangular
Cable entry plate plastic type KDP/N 24
The plastic cable entry plate type KDP/N 24 is the second generation of our square, plastic
cable entry plates with improved clip-in function.
Economical connection technology for tool-free wiring of equipment and machinery. Wherever the rapid and economical introduction of cables and/or pneumatic hoses in confined
spaces is essential. The alternative to cable fittings. Suitable for standard cut-outs for 24pin Harting and Wieland connectors. For snap-in fastening and/or screwing in place.
• Snap-in at plate thicknesses of 1.5 – 2.0 mm
-30 – 70 °C
Enclosure: Polyamide 6.6
Seal: TPU/NBR/EPDM
Enclosure: V0
IP 65
KDP/N 24
68
Type
Order no.
Colour
Openings
total
Openings
quantity / Ø
Installation A
height
mm
mm
B
mm
a
mm
b
mm
c
mm
d
mm
e
mm
Pack
qty.
KDP/N 24/11
87301110
black
11
4 / 3.0 – 6.5 mm
4 / 5.0 – 9.2 mm
3 / 14.0 – 20.0 mm
15.0
59.0
147.0
112.0
36.0
65.0
16.0
5.5
1
KDP/N 24/12
87301120
black
12
12 / 8.0 – 12.0 mm
15.0
59.0
147.0
112.0
36.0
65.0
16.0
5.5
1
KDP/N 24/13
87301130
black
13
2 / 3.0 – 5.5 mm
6 / 4.1 – 8.1 mm
4 / 9.0 – 14.0 mm
1 / 14.0 – 20.0 mm
15.0
59.0
147.0
112.0
36.0
65.0
16.0
5.5
1
KDP/N 24/14
87301140
black
14
6 / 3.0 – 6.5 mm
4 / 5.0 – 9.2 mm
4 / 9.6 – 15.9 mm
15.0
59.0
147.0
112.0
36.0
65.0
16.0
5.5
1
KDP/N 24/17
87301150
black
17
17 / 5.0 – 9.2 mm
15.0
59.0
147.0
112.0
36.0
65.0
16.0
5.5
1
KDP/N 24/17-1
87301151
black
17
11 / 3.0 – 6.5 mm
1 / 4.1 – 8.1 mm
5 / 8.0 – 12.5 mm
15.0
59.0
147.0
112.0
36.0
65.0
16.0
5.5
1
KDP/N 24/22
87301160
black
22
16 / 3.0 – 6.5 mm
4 / 5.0 – 9.2 mm
2 / 8.0 – 12.5 mm
15.0
59.0
147.0
112.0
36.0
65.0
16.0
5.5
1
KDP/N 24/23
87301170
black
23
23 / 4.1 – 8.1 mm
15.0
59.0
147.0
112.0
36.0
65.0
16.0
5.5
1
Cable entry plate plastic type KDP/N 24
Type
Order no.
Colour
Openings
total
Openings
quantity / Ø
Installation A
height
mm
mm
KDP/N 24/29 87301180
black
29
29 / 3.0 – 6.5 mm
15.0
KDP/N 24/80 87301190
black
80
78 / 1.5 – 2.6 mm
2 / 2.5 – 5.0 mm
15.0
B
mm
a
mm
b
mm
c
mm
d
mm
e
mm
Pack
qty.
59.0
147.0
112.0
36.0
65.0
16.0
5.5
1
59.0
147.0
112.0
36.0
65.0
16.0
5.5
1
Other variants on request. Ask your Murrplastik team.
Matching label plate, type KSS 20x9 or KSS 10x8 – see catalogue ACS.
The correct tool for completing the cutaway can be found in the chapter on "Punching tools".
69
Cable entry plate KDP
plastic, rectangular
Cable entry plate KDP 24-Multi
The cable entry plates, type KDP 24-Multi are a combination of our KDP system and our
cable entry strips KDL / E. They are ideal for situations where a few cables with plugs have
to be brought into the switch cabinet next to cables without plugs. The cable entry plates
take up to four preassembled cables in two grommets.
• Catch hook for 1.5 – 2.0 mm plate thickness included with delivery, additional catch
hooks for up to 4.1 mm plate thickness available.
-30 – 70 °C
Enclosure: Polyamide
Seal: TPU/NBR/EPDM
Enclosure: V0
IP 54
KDP 24/xx/02
70
Type
Order no.
Colour
Openings Openings Grommets Installation A
total
quantity / Ø
No.
height
mm
mm
KDP 24/10/02
87301076
black
10
4 / 3.0 – 6.5
2 / 4.5 – 8.5
4 / 8.0 – 12.5
2
KDP 24/14/02
87301078
black
14
4 / 2.5 – 5.0
2 / 3.0 – 6.5
8 / 4.5 – 8.5
KDP 24/15/02
87301080
black
15
KDP 24/17/02
87301082
black
KDP 24/20/02
87301084
KDP 24/21/02
87301086
B
mm
a
mm
b
mm
c
mm
d
mm
e
mm
Pack
qty.
15.5
146.0 58.0 112.0 36.0 65.0 16.0
5.5
1
2
15.5
146.0 58.0 112.0 36.0 65.0 16.0
5.5
1
2 / 1.5 – 3.5
11 / 3.0 – 6.5
2 / 8.5 – 12.5
2
15.5
146.0 58.0 112.0 36.0 65.0 16.0
5.5
1
17
17 / 3.0 – 6.5
2
15.5
146.0 58.0 112.0 36.0 65.0 16.0
5.5
1
black
20
4 / 1.5 – 3.5
6 / 3.0 – 5.0
10 / 3.0 – 6.5
2
15.5
146.0 58.0 112.0 36.0 65.0 16.0
5.5
1
black
21
21 / 2.5 – 5.0
2
15.5
146.0 58.0 112.0 36.0 65.0 16.0
5.5
1
Cable entry plate KDP 24-Multi
Type
Order no.
Colour Openings Openings Grom- Installation A
B
a
b
c
d
e
Pack
total quantity / Ø mets
height mm mm mm mm mm mm mm qty.
No.
mm
Replacement parts
Catch hooks 1.5 – 2.0 mm
Catch hooks 2.1 – 2.7 mm
Catch hooks 2.8 – 3.4 mm
Catch hooks 3.5 – 4.1 mm
8712102000
8712101800
8712101600
8712101400
black
black
black
black
-
-
10
10
10
10
Matching grommets KDT/ZE; KDT/VE; SDT/ZE; BTK/E
Matching label plate, type KSS 20x9 or KSS 10x8 – see catalogue ACS.
Matching adapter plates type KDP 24/AP/xx for the assembly of multiple 24/xx/xx
in standardised cut-outs (Rittal/Lohmeier/Ensto)
see chapter "Cable entry plate KDP plastic"
The correct tool for completing the cutaway can be found in the chapter on "Punching tools".
71
Cable entry plate KDP
plastic, rectangular
Mounting KDP/N Snap-on mounting
0.06 - 0.08”
1,5 - 2,0 mm
Create cut out (112 x 36 mm) for the KDP/N 24/x as shown in the
illustration. Insert cable insertion plate and press on until it clicks
into place.
“Click”
Where necessary, remove the optional black cover from the locking
plate. To do so, press the opening through from the rear until the
cover falls out.
Select an opening appropriate for the cable diameter and push the
cable through the opening from the front. The indicator becomes
visible on the rear of the KDP/N 24/x. Pull cable through to desired
length.
Retract cable approx. 10 – 15 mm until the indicator on the rear is
no longer visible. Depending on cable diameter and insertion size,
the indicator may well become visible on the front side again.
4x5
,
6x3 0-9,2
,0-6
,5
72
4x5,0-9,2
6x3,0-6,5
Position optional label plate (type KSS...) and click in. The clamping
range for the openings (e.g. 4x5.0 – 9.2) are visible on the front of
the insertion plate.
Mounting KDP/N Screw-on mounting
Create cut out (112 x 36 mm) and mounting holes for the KDP/N
24/x as shown in the illustration. Press through the membrane on
the mounting holes on the cable entry plate. Set plate onto the cutout and screw down.
4x
Where necessary, remove the optional black cover from the locking
plate. To do so, press the opening through from the rear until the
cover falls out.
Select an opening appropriate for the cable diameter and push the
cable through the opening from the front. The indicator becomes
visible on the rear of the KDP/N 24/x. Pull cable through to desired
length.
Retract cable approx. 10 – 15 mm until the indicator on the rear is
no longer visible. Depending on cable diameter and insertion size,
the indicator may well become visible on the front side again.
4x5,0-9,2
6x3,0-6,5
4x5
,
6x3 0-9,2
,0-6
,5
Position optional label plate (type KSS...) and click in. The clamping
range for the openings (e.g. 4x5.0 – 9.2) are visible on the front of
the insertion plate.
73
Cable entry plate KDP
plastic, rectangular
Mounting KDP-Multi snap-on mounting
Create a cut-out (112 x 36 mm) for the cable entry plate. Set catch
hooks into the sides of the cut-out.
Lay cable into an appropriate grommet and provide strain relief
where necessary using cable ties.
Use appropriate tool to punch through cover on base frame.
Select a sleeve suitable for the diameter of the cable and place the
cable in the sleeve. Make sure there is enough cable length. Close
grommets if necessary pull through the cable with a strain-relief
cable tie to the desired length. Retract cable approx. 10 – 15 mm
until the indicator on the rear is no longer visible. Depending on
cable diameter and insertion size, the indicator may well become
visible on the front side again.
Select an opening appropriate for the cable diameter and push the
cable through the opening from the front. The indicator becomes
visible on the rear side. Pull cable through to desired length. Retract
cable approx. 10 – 15 mm until the indicator on the rear is no longer
visible. Depending on cable diameter and insertion size, the indicator may well become visible on the front side again.
74
Mounting KDP-Multi snap-on mounting
Push the cable entry plate over the set catch and lock in place.
Lock the set catch and press down the cable entry plate again at
the edges.
75
Cable entry plate KDP
plastic, rectangular
Mounting KDP-Multi screw-on mounting
Create a cut-out and drill holes (112 x 36 mm) for the cable entry
plate.
Lay cable into appropriate grommet and provide strain relief where
necessary using cable ties.
Use appropriate tool to punch through cover on base frame.
Select a sleeve suitable for the diameter of the cable and place the
cable in the sleeve. Make sure there is enough cable length. Close
the sleeve and if necessary relieve strain on the cable using a cable
tie. Position the sleeve in the cable entry system.
Select an opening appropriate for the cable diameter and push the
cable through the opening from the front. The indicator becomes
visible on the rear side. Pull cable through to desired length. Retract
cable approx. 10 – 15 mm until the indicator on the rear is no longer
visible. Depending on cable diameter and insertion size, the indicator may well become visible on the front side again.
76
Mounting KDP-Multi screw-on mounting
Position and affix the cable entry plate above the cut-out.
Press down the cable entry system at the edges again.
77
78
Cable entry plate KDP
plastic round
79
Cable entry plate KDP
plastic round
Advantages
Straight in!
Now also for
round cut-outs
80
Install electric cable and pneumatic hoses with minimal effort,
saving time and money.
The KDP cable entry system is
ideal if space is at a premium.
Simply snap-in the KDP/R or
screw in with a locking nut.
Push cable through in a few seconds. That’s all there is to it!
The round version of the cable
entry plates allows for work with
round cut-outs.
The principle is identical to our
tried-and-tested KDP/N 24 (rectangular).
Custom solutions with other
hole patterns are available by
request.
✔Enormous time savings during
assembly
✔High packing density hence
minimal space requirements
✔Assembly without tools
✔High protection class IP 65
✔Protects the hoses & cables
✔Can simply be locked in
Overview
Cable entry plate, round,
type KDP/R
Economical connection technology for tool-free
wiring of equipment and machinery.
Extremely quick mounting of cables and pneumatic conduits.
Page 84
“Click”
Snap-on mounting
Screw-on mounting
Detailed construction and assembly instructions
for the snap-on/screw-on fittings.
Page 85
81
Cable entry plate KDP
plastic round
Selection table (possible combinations of cable entries)
The round cable entry plates type KDP/R are a real alternative to cable fitting.
The KDP/R metal can be fitted directly, or using adapter plates, into prefabricated housing cut-outs. For a tool-less, rational connection technology for
wiring machines and equipment. Extremely quick mounting of cables and
pneumatic conduits. For snap-in fastening or screwing in place with a lock
nut.
Number of openings on the cable entry plate
corresponds to cable diameter
Ø mm
3.0–5.0
Ø mm
3.0–5.5
Ø mm
3.0–6.5
Ø mm
3.5–6.5
Ø mm
5.0–9.2
KDP/R M50/04
3
Item no. 87301030
KDP/R M50/06
1
Item no. 87301032
7
Item no. 87301034
KDP/R M63/08
2
Item no. 87301040
KDP/R M63/13
6
Item no. 87301042
Item no. 87301044
82
19
1
5
KDP/R M50/08
KDP/R M63/19
Ø mm
Ø mm
6.0–10.0 9.6–15.9
1
4
6
2
1
Material data KDP plastic, round
Halogen-free
Phosphorous-free
Cadmium-free
Asbestos-free
Lead-free
Silicone-free
The cable entry plates types KDP/R M50
and KDP/R M63 comply with ROHS and
feature IP class 65.
Additionally all components are free of
halogen, phosphorous, cadmium, asbestos, lead and silicone.
It can be used within a temperature
range of -30 to 90 °C. The housing of
types KDP/R M50 and KDP/R M63 are
inspection according to fire classification V0
They are made of polyamide 6.6,
the sealant plates used are made of
TPU/NBR/EPDM.
UR approvals as well as approvals for the
German and French railways exist for the
housing.
83
Cable entry plate KDP
Plastic/round
Cable entry plate, round, type KDP/R
Economical connection technology for tool-free wiring of equipment and machinery. Extremely quick mounting of cables and pneumatic hoses. The real alternative to cable fittings. For snap-in fastening or screwing in place with a lock nut. Casing not included with
delivery!
• For snapping in plates of 1.5 – 2.0 mm
• Integrated seal
• Compact design
• High protection class
-30 – 90 °C
Enclosure: Polyamide 6.6
Seal: NBR/EPDM
Enclosure: V0
IP 65
A
B
D
C
KDP/R...
Type
Order no.
Colour
Openings
total
Openings
quantity / Ø
Thread
metric
A
mm
B
mm
C
mm
D
mm
Pack
qty.
KDP/R M50/04
87301030
black
4
3 / 6.0 – 10.0 mm
1 / 9.6 – 15.9 mm
M50x1.5
58
9
24
50.5
1
KDP/R M50/06
87301032
black
6
1 / 3.0 – 5.5 mm
5 / 5.0 – 9.2 mm
M50x1.5
58
9
24
50.5
1
KDP/R M50/08
87301034
black
8
7 / 3.5 – 6.5 mm
1 / 6.0 – 10.0 mm
M50x1.5
58
9
24
50.5
1
KDP/R M63/08
87301040
black
8
2 / 3.0 – 6.5 mm
4 / 5.0 – 9.2 mm
2 / 9.6 – 15.9 mm
M63x1.5
71
9
25
63.5
1
KDP/R M63/13
87301042
black
13
6 / 3.0 – 5.5 mm
6 / 3.5 – 6.5 mm
1 / 6.0 – 10.0 mm
M63x1.5
71
9
25
63.5
1
KDP/R M63/19
87301044
black
19
19 / 3.0 – 5.0 mm
M63x1.5
71
9
25
63.5
1
The right tool for cut-out production
can be found in the chapter "Punching tools"
The right locknut can be found in the "Accessories" chapter
84
Snap-on mounting
Create circular cut-out dimensioned for the KDP/R. Insert cable insertion plate and press on until it clicks into place.
“Click”
Where necessary, remove the optional black cover from the locking
plate. To do so, press the opening through from the rear until the
cover falls out.
Select an opening appropriate for the cable diameter and push the
cable through the opening from the front. The indicator becomes
visible on the rear of the KDP/R. Pull cable through to desired
length.
Retract cable approx. 10 – 15 mm until the indicator on the rear is
no longer visible. Depending on cable diameter and insertion size,
the indicator may well become visible on the front side again.
85
Cable entry plate KDP
Plastic/round
Screw-on mounting
Create circular cut-out dimensioned for the KDP/R. Place cable insertion plate and press on. Fasten KDP/R with lock nut.
Where necessary, remove the optional black cover from the locking
plate. To do so, press the opening through from the rear until the
cover falls out.
Select an opening appropriate for the cable diameter and push the
cable through the opening from the front. The indicator becomes
visible on the rear of the KDP/R. Pull cable through to desired
length.
Retract cable approx. 10 – 15 mm until the indicator on the rear is
no longer visible. Depending on cable diameter and insertion size,
the indicator may well become visible on the front side again.
86
Cable entry plate KDP
Metal
87
Cable entry plate, type KDP
metal rectangular
Advantages
Fits in even
confined spaces
The metal cable entry plate is, like
the plastic version, an ideal alternative to cable fittings.
Cabels and hoses can be installed in seconds, even in highly confined spaces.
Aluminium and stainless steel
versions offer a broad range of
applications.
Stainless steel version particularly suited for foodstuffs and
chemical industries.
Quick installation of up to 292
services even while saving up to
50% of space thereby reducing
costs as well.
88
✔High packing density
✔Quick installation
✔High IP protection class
✔Low installation height
✔Fits in Rittal enclosure
Overview
Cable entry plate metal
KDP 100 (100x145 mm)
The KDP metal cable entry plates with external
dimensions 100x145 mm can be mounted in cutouts measuring 82x132 mm.
Page 107
Cable entry plate metal
KDP 90 (90x90 mm)
Cable entry plate metal
KDP 105 (100x155 mm)
The KDP metal cable entry plates with external
dimensions 90x90mm can be mounted in cut-outs
with Ø 75 mm.
The KDP metal cable entry plates with external
dimensions 105x155 mm can be mounted in cutouts measuring 82x132 mm.
Page 101
Page 109
Cable entry plate metal
KDP 90 (90x144 mm)
Cable entry plate metal
KDP 120 (120x190 mm)
The KDP metal cable entry plates with external
dimensions 90x144 mm can be mounted in cutouts measuring 71x109 mm.
The KDP metal cable entry plates with external
dimensions 120x190 mm can be mounted in cutouts measuring 94x164 mm.
Page 102
Page 110
Cable entry plate metal
KDP 90 (90x221 mm)
Cable entry plate metal
KDP 134 (134x254 mm)
The KDP metal cable entry plates with external
dimensions 90x221 mm can be mounted in cutouts measuring 62x192 mm.
The KDP metal cable entry plates with external
dimensions 134x254 mm can be mounted in cutouts measuring 111x231 mm.
Page 103
Page 111
Cable entry plate metal
KDP 90+3 (90x221 mm)
Cable entry plate metal
KDP 149 (149x339 mm)
The KDP metal cable entry plates with external
di­mensions 90x221 mm can be mounted in cut-outs
measuring 62x192 mm. Additionally, up to three preassembled cables can be inserted.
Page 104
The KDP metal cable entry plates with external
dimensions 149x339 mm can be mounted in cutouts measuring 115x303 mm.
Cable entry plate metal
KDP 90 (90x294 mm)
Cable entry plate metal
KDP 149 (149x534 mm)
The KDP metal cable entry plates with external
dimensions 90x294 mm can be mounted in cutouts measuring 71x271 mm.
The KDP metal cable entry plates with external
dimensions 149x534 mm can be mounted in cutouts measuring 115x500 mm.
Page 112
Page 105
Page 113
Cable entry plate metal
KDP 90 (90x394 mm)
Assembly design ALU
Assembly design V4A
The KDP metal cable entry plates with external
dimensions 90x394 mm can be mounted in cutouts measuring 71x371 mm.
Detailed configuration and assembly instruction for
design in aluminium/stainless steel.
Page 106
Page 114
89
Cable entry plate, type KDP
metal rectangular
Selection table KDP 90 (possible combinations of cable entries)
The KDP metal with installation height 90 mm is one of the many products
from the KDP metal range. It can be fitted directly, or using adapter plates, into
prefabricated housing cut-outs.
The technical advantage here is linked to the enormous time savings with
cable assembly. IP class 65 is achieved without additional time or material.
The cable entry plates from the KDP metal enable tool-free introduction of
actuators, sensors, measuring and control instrumentation, optoelectronics,
pneumatic lines and drive technology e.g. into a control housing.
Number of openings on the cable entry plate
corresponds to cable diameter
Ø mm
Ø mm
Ø mm
Ø mm
Ø mm
Ø mm
Ø mm
Ø mm
3.0–5.0 3.0–6.0 3.0–6.2 3.5–6.5 4.0–8.0 4.5–8.5 6.0–10.0 6.0+8.5
KDP 90/13
2
V4A: Item no. 87663118
4
9
16
KDP 90/28
14
ALU: Item no. 87663032
V4A: Item no. 87663034
14
KDP 90/55
V4A: Item no. 87663058
3
32
24
KDP 90/5
ALU: Item no. 87663029
90
4
10
28
16
12
1+2
The stainless steel version is particularly suitable for application in the food
and chemical industries. Integrated threaded bolts mean that no screws are
visible from outside.
The cut-out of the KDP 90/39+3 enables up to three pre-assembled cables
with a maximum connector size of 48 x 24 mm to be introduced.
Number of openings on the cable entry plate
corresponds to cable diameter
Ø mm
7.0–11.0
Ø mm
8.0–12.0
Ø mm
Ø mm
Ø mm
Ø mm
Ø mm
9.0–14.0 11.0–16.0 12.0–18.0 14.0–18.0 16.0–28.0
2
1
KDP 90/25
ALU: Item no. 87663022
2
4
2
KDP 90/47
1
ALU: Item no. 87663037
V4A: Item no. 87663039
4
KDP 90/39+3
3
ALU: Item no. 87663036
V4A: Item no. 87663038
5
8
KDP 90/8
ALU: Item no. 87663026
91
Cable entry plate, type KDP
metal rectangular
Selection table KDP 100 (possible combinations of cable entries)
The KDP metal with installation height 100 mm is one of the many products
from the KDP metal range. Cable entry plates of the 100 series fit into standard cut-outs for Rittal or Sarel cabinets when combined with adapter plates
KDP AP 149/100/... The technical advantage here is linked to the enormous
time savings wit cable assembly. IP class 65 is achieved without additional
time or material.
Number of openings on the cable entry plate
corresponds to cable diameter
Ø mm
1.0–3.5
Ø mm
3.5–6.2
Ø mm
3.5–6.5
Ø mm
4.5–8.5
Ø mm
6.0–10.0
Ø mm
6.0–10.5
KDP 100/6
V4A: Item no. 87663116
KDP 100/18
V4A: Item no. 87663122
24
KDP 100/30
V4A: Item no. 87663062
12
12
12
12
KDP 100/40
40
V4A: Item no. 87663061
48
KDP 100/56B
V4A: Item no. 87663065
92
8
48
8
48
4
4
The cable entry plates from the KDP metal enable tool-free introduction of
actuators, sensors, measuring and control instrumentation, optoelectronics,
pneumatic lines and drive technology e.g. into a control housing.
The stainless steel version is particularly suitable for application in the food
and chemical industries. Integrated threaded bolts mean that no screws are
visible from outside.
Number of openings on the cable entry plate
corresponds to cable diameter
Ø mm
8.0–12.0
Ø mm
9.0–14.0
Ø mm
11.0–16.0
Ø mm
12.0–18.0
Ø mm
16.0–24.0
6
3
KDP 100/15
12
V4A: Item no. 87663120
18
KDP 100/24
V4A: Item no. 87663124
6
4
2
KDP 100/30B
V4A: Item no. 87663063
KDP 100/56
V4A: Item no. 87663060
KDP 100/56C
V4A: Item no. 87663067
93
Cable entry plate, type KDP
metal rectangular
Selection table KDP 105/120/134 (possible combinations of cable entries)
The KDP metal with installation heights 100, 105 and 134 mm are further
products from the KDP metal range. The 120 series is ideally suited for the
electric power area. Performance cables and sercices are sealed and fed into
control cabinets or junction boxes and are supported stabley. The technical
advantage here is linked to the enormous time savings wit cable assembly. IP
class 65 is achieved without additional time or material.
Number of openings on the cable entry plate
corresponds to cable diameter
Ø mm
3.0–5.0
Ø mm
3.5–6.5
Ø mm
4.0–8.0
Ø mm
6.0–10.0
Ø mm
8.0–12.0
KDP 105/12
9
ALU: Item no. 87663056
V4A: Item no. 87663057
8
KDP 105/32
ALU: Item no. 87663010
V4A: Item no. 87663012
Ø mm
9.0–14.0
16
12
4
4
KDP 120/2B
ALU: Item no. 87663002
KDP 120/17
6
ALU: Item no. 87663004
8
KDP 134/34
ALU: Item no. 87663024
94
2
4
18
6
15
4
5
The cable entry plates from the KDP metal enable tool-free introduction of
actuators, sensors, measuring and control instrumentation, optoelectronics,
pneumatic lines and drive technology e.g. into a control panel.
The stainless steel version is particularly suitable for application in the food
and chemical industries. Integrated threaded bolts mean that no screws are
visible from outside.
Number of openings on the cable entry plate
corresponds to cable diameter
Ø mm
9.6–15.9
Ø mm
12.0–18.0
Ø mm
14.0–20.0
2
Ø mm
18.0–25.0
Ø mm
18.0–36.0
Ø mm
36.0–49.0
1
KDP 105/15
3
ALU: Item no. 87663014
V4A: Item no. 87663016
KDP 120/2
2
ALU: Item no. 87663001
2
1
3
7
1
KDP 120/2C
ALU: Item no. 87663003
4
2
KDP 120/35
ALU: Item no. 87663005
2
95
Cable entry plate, type KDP
metal rectangular
Selection table KDP 149 (possible combinations of cable entries)
The KDP metal with installation height 149 mm is one of the many products
from the KDP metal range. KDPs of product group 149 can be fitted directly
into the standard cut-outs of Rittal or Sarel cabinets.
The technical advantage here is linked to the enormous time savings with
cable assembly. IP class 65 is achieved without additional time or material.
Number of openings on the cable entry plate
corresponds to cable diameter
Ø mm
3.5–6.2
Ø mm
4.5–8.5
KDP 149/56
126
24
KDP 149/46
Ø mm
8.0–12.0
6
8
ALU: Item no. 87663064
16
KDP 149/292
Ø mm
6.0–12.0
36
V4A: Item no. 87663086
V4A: Item no. 87663066
Ø mm
6.0–10.0
64
250
36
4
32
8
Material data for all KDP metal
Halogen-free
Phosphorous-free
Cadmium-free
Asbestos-free
Lead-free
Silicone-free
96
All types of KDP metal comply with ROHS
and feature the high IP class 65. Additionally all components are free of halogen, phosphorous, cadmium, asbestos,
lead and silicone. KDP metal also have
CSA approval.
It can be used within a temperature range
of -30 to 90 °C. Aluminium designs, recognisable by the additional type ALU, are
made of high quality AlMg3 (3.3535).
Stainless steel designs, recognisable
by the additional type V4A, are made of
stainless steel of quality category V4A
(1.4571).
The sealant on all KDP metal type is
made of NBR/EPDM.
The cable entry plates from the KDP metal enable tool-free introduction of
actuators, sensors, measuring and control instrumentation, optoelectronics,
pneumatic lines and drive technology e.g. into a control panel.
The stainless steel version is particularly suitable for application in the food
and chemical industries. Integrated threaded bolts mean that no screws are
visible from outside.
Number of openings on the cable entry plate
corresponds to cable diameter
Ø mm
9.0–14.0
Ø mm
10.0–14.0
Ø mm
12.0–18.0
8
Ø mm
14.0–18.0
Ø mm
18.0–25.0
8
4
KDP 149/158
2
16
V4A: Item no. 87663068
18
8
4
8
4
KDP 149/140
V4A: Item no. 87663088
2
97
Cable entry plate, type KDP
metal rectangular
Assigning cut-out codes / KDP types / adapter plates
Cut-out codes for direct assembly of the KDP in the control cabinet
Code
Code
Code
90A
90B
90C
KDP 90/13
Page 101
KDP 90/25
Page 102
Code
Code
90E
90F
KDP 90/5
Page 105
KDP 90/28
Page 103
KDP 90/47
Page 103
KDP 100/40
Page 107
KDP 100/56
Page 107
KDP 90/55
Page 103
KDP 90/90+3
Page 104
KDP 90/8
Page 106
Code
100A
KDP 100/6
Page 107
KDP 100/15
Page 107
KDP 100/18
Page 107
KDP 105/12
Page 109
KDP 105/15
Page 109
KDP 105/32
Page 109
KDP 120/2
Page 110
KDP 120/2B
Page 110
KDP 120/2C
Page 110
KDP 100/24
Page 107
KDP 100/30
Page 107
KDP 120/17
Page 110
KDP 120/35
Page 110
KDP 100/30B
Page 107
KDP 100/56B KDP 100/56C
Page 107
Page 108
Code
105A
Code
120A
Code
134A
KDP 134/34
Page 111
Code
Code
149A
149B
KDP 149/56
Page 112
KDP 149/158
Page 112
KDP 149/46
Page 113
KDP 149/140 KDP 149/292
Page 113
Page 113
Cut-out codes for indirect assembly of the KDP in the control cabinet using the adapter plate
Code
AP130A
Code

AP130B
KDP AP/SA/130/100/3+2
for 3x KDP 100/xx + 2x M32
Page 142
Code
Code
AP149B

98
AP130C

KDP AP/SA/130/100/2+4
for 2x KDP 100/xx + 4x M32
Page 142
AP149A
KDP AP 149/100/2
for 2x KDP 100/xx
Page 141
Code

KDP AP 149/100/3
for 3x KDP 100/xx
Page 141

KDP AP/SA/130/100/2
for 2x KDP 100/xx
Page 142

KDP AP 149/105/3
for 3x KDP 105/xx
Page 141
Selection table Rittal Housing (Murrplastik cut-out codes)
Rittal
Murrplastik
Order no.
Type
Cut-out code for
direct assembly
Cut-out code for
adapter plate.
1039.500
1045.500
1050.500
1057.500
1058.500
1060.500
1073.500
1076.290
1076.500
1077.500
1090.500
1100.500
1110.500
1114.500
1130.500
1180.500
1213.500
1260.500
1280.500
1338.500
1339.500
1350.500
1360.500
1376.500
1530.510
1531.510
1532.510
1533.510
1534.510
1535.510
1536.510
1537.510
1538.510
1539.510
1540.510
1541.510
1542.510
1919.500
1920.500
1926.500
6214.xx0
6220.xx0
6900.xxx
6901.xxx
AE
AE
AE
AE
AE
AE
AE
AE
IN
AE
AE
AE
AE
AE
AE
AE
AE
AE
AE
AE
AE
AE
AE
AE
KL
KL
KL
KL
KL
KL
KL
KL
KL
KL
KL
KL
KL
EL
EL
EL
CP
CP
IW
IW
149B
149A
149A
149A
149B
149B
149B
149B
149B
149B
149B
149A
149A
149A
149A
149B
149A
149B
149B
149A
149B
149A
149B
149B
90C
90C
90C
90C
90C
90C
90C
90C
90C
90C
90C
90C
90C
149B
149B
149B
90C
90C
90C
90C
AP149B
AP149A
AP149A
AP149A
AP149B
AP149B
AP149B
AP149B
AP149B
AP149B
AP149B
AP149A
AP149A
AP149A
AP149A
AP149B
AP149A
AP149B
AP149B
AP149A
AP149B
AP149A
AP149B
AP149B
Rittal
Murrplastik
Order no.
Type
Cut-out code for
direct assembly
Cut-out code for
adapter plate.
7011.535
7012.535
7013.535
7014.535
7454.xxx
7641.000
7643.000
7644.000
7645.000
9665.815
9665.825
9665.835
9665.845
9665.855
9751.125
9751.145
9751.165
9752.125
9771.110
9771.115
9772.110
9772.115
9774.200
9774.210
9774.250
9774.400
9774.410
9774.450
9775.100
9775.200
9775.300
9775.400
DK
DK
DK
DK
DK
DK
DK
DK
DK
SV
SV
SV
SV
SV
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
149B
149B
149B
149B
90C
149B
149B
149B
149B
149A
149B
149B
149B
149A
149A
149A
149A
149A
149A
149A
149B
149B
149A
149A
149A
149A
149A
149A
149A
149A
149A
149A
AP149B
AP149B
AP149B
AP149B
AP149B
AP149B
AP149B
AP149B
AP149A
AP149B
AP149B
AP149B
AP149A
AP149A
AP149A
AP149A
AP149A
AP149A
AP149A
AP149B
AP149B
AP149A
AP149A
AP149A
AP149A
AP149A
AP149A
AP149A
AP149A
AP149A
AP149A
AP149B
AP149B
AP149B
99
Selection table Sarel Housing (Murrplastik cut-out codes)
Sarel
100
Murrplastik
Order no.
Cut-out code for
direct assembly
Cut-out code for
adapter plate.
87019 (83019)
87319 (83319)
87519 (83519)
87022 (83022)
87322 (83322)
87522 (83522)
87023 (83023)
87323 (83323)
87523 (83523)
87024 (83024)
87324 (83324)
87524 (83524)
87025 (83025)
87325 (83325)
87525 (83525)
87026 (83026)
87326 (83026)
87526 (83526)
87027 (83027)
87327 (83327)
87527 (83527)
87028 (83028)
87328 (83328)
87528 (83528)
87029 (83029)
87329 (83329)
87529 (83529)
87031 (83031)
87331 (83331)
87531 (83531)
87032 (83032)
87332 (83332)
87532 (83532)
87035 (83035)
87335 (83335)
87535 (83535)
87037 (83037)
87337 (83337)
87537 (83537)
87043 (83043)
87543 (83343)
87543 (83543)
87045 (83045)
87345 (83345)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
AP130C
AP130C
AP130C
AP130B
AP130B
AP130B
AP130C
AP130C
AP130C
AP130C
AP130C
AP130C
AP130B
AP130B
AP130B
AP130C
AP130C
AP130C
AP130C
AP130C
AP130C
AP130A
AP130A
AP130A
AP130A
AP130A
AP130A
AP130A
AP130A
AP130A
AP130A
AP130A
AP130A
AP130B
AP130B
AP130B
AP130C
AP130C
AP130C
AP130A
AP130A
AP130A
AP130C
AP130C
Sarel
Order no.
87545 (83545)
87046 (83046)
87346 (83346)
87546 (83546)
87047 (83047)
87347 (83347)
87054 (83054)
87354 (83354)
87554 (83554)
87056 (83056)
87356 (83356)
87556 (83556)
87060 (83060)
87360 (83360)
87560 (83560)
87061 (83061)
87361 (83361)
87561 (83561)
87062 (83062)
87362 (83362)
87562 (83562)
87063 (83063)
87363 (83363)
87563 (83563)
87064 (83064)
87364 (83364)
87564 (83564)
87065 (83065)
87365 (83365)
87565 (83565)
87066 (83066)
87366 (83366)
87067 (83067)
87367 (83367)
87567 (83567)
87070 (83070)
87370 (83370)
87570 (83570)
87071 (83071)
87371 (83371)
87571 (83571)
Murrplastik
Cut-out code for
direct assembly
Cut-out code for
adapter plate.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
AP130C
AP130C
AP130C
AP130C
AP130B
AP130B
AP130A
AP130A
AP130A
AP130A
AP130A
AP130A
AP130C
AP130C
AP130C
AP130C
AP130C
AP130C
AP130C
AP130C
AP130C
AP130B
AP130B
AP130B
AP130C
AP130C
AP130C
AP130B
AP130B
AP130B
AP130B
AP130B
AP130C
AP130C
AP130C
AP130B
AP130B
AP130B
AP130B
AP130B
AP130B
–
–
–
–
–
–
–
–
–
–
–
Cable entry plate Metal Type 90 (90x90 mm)
Efficient connection technology for terminal boxes and control cabinets for tool-free introduction of actuators, sensors, measuring and control instrumentation, optoelectronics,
pneumatic lines and drive technology into a control panel. The stainless steel version is particularly suitable for application in the food and chemical areas. Integrated threaded bolts
mean that no screws are visible from outside. Mounting set included in delivery.
-30 – 90 °C
Plate: see article
Seal: NBR/EPDM
IP 65
Cut-out code:
90A
C
Øe
A
b
a
B
KDP 90/13...
Type
Order no.
Colour
Openings
total
KDP 90/13 V4A
87663118
smoothed
13
Openings
quantity / Ø
Material
Plate
2 / 3.0 – 6.2 mm V4A (1.4571)
4 / 4.5 – 8.5 mm
4 / 6.0 – 10.0 mm
2 / 9.0 – 14.0 mm
1 / 14.0 – 18.0 mm
A
mm
B
mm
a
mm
b
mm
c
mm
e
mm
Pack
qty.
90.0
90.0
75.0
64.0
64.0
4.5
1
101
Cable entry plate KDP
Metal
Cable entry plate Metal Type 90 (90x144 mm)
Efficient connection technology for terminal housings and control cabinets for tool-free introduction of actuators, sensors, measuring and control instrumentation, optoelectronics,
pneumatic lines and drive technology into a control panel.
-30 – 90 °C
Plate: see article
Seal: NBR/EPDM
IP 65
Cut-out code:
90B
c
c
Øe
d
A
b
d
B
a
KDP 90/25...
Type
Order no.
KDP 90/25 ALU 87663022
102
Colour
Openings
total
RAL 7035
25
Openings
quantity / Ø
Material
Plate
9 / 3.0 – 5.0 mm AlMg3 (3.3535)
16 / 4.0 – 8.0 mm
A
mm
B
mm
a
mm
b
mm
c
mm
d
e
mm mm
90.0 144.0 109.0 71.0 41.0 39.5
5.5
Pack
qty.
1
Cable entry plate Metal Type 90 (90x221 mm)
Efficient connection technology for terminal housings and control cabinets for tool-free introduction of actuators, sensors, measuring and control instrumentation, optoelectronics,
pneumatic lines and drive technology into a control panel. The stainless steel version is particularly suitable for application in the food and chemical areas. Integrated threaded bolts
mean that no screws are visible from outside. Mounting set included in delivery.
-30 – 90 °C
Plate: see article
Seal: NBR/EPDM
IP 65
Cut-out code:
90C
c
A
B
c
d
f
d
f
Øe
b
a
KDP 90/28...
Type
Order no.
Colour Openings
total
KDP 90/28 ALU
KDP 90/28 V4A
87663032 RAL 7035
87663034 smoothed
28
28
14 / 4.0 – 8.0 mm AlMg3 (3.3535) 90.0 221.0 192.0 62.0 101.0 36.0 4.5 38.0
10 / 6.0 – 10.0 mm V4A (1.4571) 90.0 221.0 192.0 62.0 101.0 36.0 4.5 38.0
2 / 9.0 – 14.0 mm
2 / 12.0 – 18.0 mm
1
1
KDP 90/47 ALU* 87663037 RAL 7035
KDP 90/47 V4A* 87663039 smoothed
47
47
14 / 3.5 – 6.5 mm AlMg3 (3.3535) 90.0 221.0 192.0 62.0 101.0 36.0 4.5 38.0
28 / 4.5 – 8.5 mm V4A (1.4571) 90.0 221.0 192.0 62.0 101.0 36.0 4.5 38.0
4 / 7.0 – 11.0 mm
1 / 11.0 – 16.0 mm
1
1
KDP 90/55 V4A
55
3 / 3.0 – 5.0 mm
32 / 3.0 – 6.2 mm
16 / 4.0 – 8.0 mm
4 / 8.0 – 12.0 mm
1
87663058 smoothed
Openings
quantity / Ø
Material
Plate
V4A (1.4571)
A
B
mm mm
a
b
c
d
e
f
Pack
mm mm mm mm mm mm qty.
90.0 221.0 192.0 62.0 101.0 36.0 4.5 38.0
* No UR authorisation
103
Cable entry plate KDP
Metal
Cable entry plate Metal Type 90+3 (90x221 mm)
Efficient connection technology for terminal boxes and control cabinets for tool-free introduction of actuators, sensors, measuring and control instrumentation, optoelectronics,
pneumatic lines and drive technology into a control panel. The cut-out of the KDP 90/39+3
enables up to three pre-assembled cables with a maximum connector size of 48 x 24 mm
to be introduced. The connector grommet is simply inserted into the plate and locked from
behind by means of a quick-release lock.
The stainless steel version is particularly suitable for application in the food and chemical
areas. Integrated threaded bolts mean that no screws are visible from outside. Mounting
set included in delivery.
-30 – 90 °C
Plate: see article
Seal: NBR/EPDM
IP 65
Cut-out code:
90C
c
A
d
d
B
c
f
Øe
4,5
b
f
a
KDP 90/39+3...
Type
Order no.
Colour
KDP 90/39+3 ALU 87663036 RAL 7035
KDP 90/39+3 V4A 87663038 smoothed
Openings
total
42
42
Openings
quantity / Ø
A
B
mm mm
a
b
c
d
e
f
Pack
mm mm mm mm mm mm qty.
24 / 3.0 – 6.0 mm AlMg3 (3.3535) 90.0 221.0 192.0 62.0 101.0 36.0 4.5 38.0
12 / 4.0 – 8.0 mm V4A (1.4571) 90.0 221.0 192.0 62.0 101.0 36.0 4.5 38.0
3 / 8.0 – 12.0 mm
For pre-assembled cables
3 additional entries are
available as well as the 39 standard entries. 1x 6,0 mm and 2x 8,5 mm
The maximum connector size is 48 x 24 mm.
104
Material
Plate
1
1
Cable entry plate Metal Type 90 (90x294 mm)
Cable entry plate for insertion of power cables. Ideally suited for roof or floor openings at
switch cabinets.
-30 – 90 °C
Plate: see article
Seal: NBR/EPDM
IP 65
Cut-out code:
90E
c
A
c
c
c
Øe
d
b
d
B
a
KDP 90/5...
Type
Order no.
Colour
KDP 90/5 ALU 87663029 RAL 7035
Openings
total
5
Openings
quantity / Ø
Material
Plate
A
mm
B
mm
a
mm
b
mm
c
mm
d
e
mm mm
5 / 16.0 – 28.0 mm * AlMg3 (3.3535) 90.0 294.0 271.0 71.0 70.0 39.5
5.5
Pack
qty.
1
* The maximum cable lug width of power cables is 32.0 mm
105
Cable entry plate KDP
Metal
Cable entry plate Metal Type 90 (90x394 mm)
Cable entry plate for insertion of power cables. Ideally suited for roof or floor openings at
switch cabinets.
-30 – 90 °C
Plate: see article
Seal: NBR/EPDM
IP 65
Cut-out code:
90F
c
A
c
c
c
Øe
d
b
d
B
a
KDP 90/8...
Type
Order no.
KDP 90/8 ALU 87663026
Colour
Openings
total
RAL 7035
8
Openings
quantity / Ø
A
mm
B
mm
a
mm
b
mm
c
mm
d
e
mm mm
8 / 16,0 – 28,0 mm * AlMg3 (3.3535) 90.0 394.0 371.0 71.0 95.0 39.5
* The maximum cable lug width of power cables is 32.0 mm
106
Material
Plate
5.5
Pack
qty.
1
Cable entry plate Metal Type 100 (105x145 mm)
Efficient connection technology for terminal boxes and control cabinets for tool-free introduction of actuators, sensors, measuring and control instrumentation, optoelectronics,
pneumatic lines and drive technology into a control panel. KDPs of the product group 100
fits into standard cut-outs for Rittal and Sarel cabinets when combined with adapter plates.
These adapter plates can be configured individually.
The stainless steel version is particularly suitable for application in the food and chemical
areas. Integrated threaded bolts mean that no screws are visible from outside. Mounting
set included in delivery.
-30 – 90 °C
Plate: see article
Seal: NBR/EPDM
IP 65
Cut-out code:
100A
c
c
Øe
d
A
b
d
a
B
KDP 100/6...
Type
Order no.
Colour
Openings
total
Openings
quantity / Ø
Material
Plate
A
mm
B
mm
a
mm
b
c
d
e Pack
mm mm mm mm qty.
KDP 100/6 V4A
87663116 smoothed
6
6 / 16.0 – 24.0 mm V4A (1.4571) 100.0 145.0 132.0 82.0 50.0 45.0 4.5
1
KDP 100/15 V4A
87663120 smoothed
15
3 / 8.0 – 12.0 mm V4A (1.4571) 100.0 145.0 132.0 82.0 50.0 45.0 4.5
12 / 11.0 – 16.0 mm
1
KDP 100/18 V4A
87663122 smoothed
18
18 / 8.0 – 12.0 mm V4A (1.4571) 100.0 145.0 132.0 82.0 50.0 45.0 4.5
1
KDP 100/24 V4A
87663124 smoothed
24
24 / 6.0 – 10.5 mm V4A (1.4571) 100.0 145.0 132.0 82.0 50.0 45.0 4.5
1
KDP 100/30 V4A
87663062 smoothed
30
12 / 3.5 – 6.2 mm V4A (1.4571) 100.0 145.0 132.0 82.0 50.0 45.0 4.5
12 / 6.0 – 10.0 mm
6 / 9.0 – 14.0 mm
1
KDP 100/30B V4A 87663063 smoothed
30
12 / 3.5 – 6.2 mm V4A (1.4571) 100.0 145.0 132.0 82.0 50.0 45.0 4.5
12 / 6.0 – 10.0 mm
4 / 9.0 – 14.0 mm
2 / 12.0 – 18.0 mm
1
KDP 100/40 V4A
87663061 smoothed
40
40 / 4.5 – 8.5 mm
V4A (1.4571) 100.0 145.0 132.0 82.0 50.0 45.0 4.5
1
KDP 100/56 V4A
87663060 smoothed
56
48 / 3.5 – 6.2 mm
8 / 6.0 – 10.0 mm
V4A (1.4571) 100.0 145.0 132.0 82.0 50.0 45.0 4.5
1
KDP 100/56B V4A 87663065 smoothed
56
48 / 1.0 – 3.5 mm
8 / 3.5 – 6.5 mm
V4A (1.4571) 100.0 145.0 132.0 82.0 50.0 45.0 4.5
1
107
Cable entry plate KDP
Metal
Cable entry plate Metal Type 100 (105x145 mm)
Type
Order no.
Colour
KDP 100/56C V4A 87663067 smoothed
108
Openings
total
56
Openings
quantity / Ø
Material
Plate
A
mm
B
mm
a
mm
b
c
d
e
mm mm mm mm
48 / 1.0 – 3.5 mm V4A (1.4571) 100.0 145.0 132.0 82.0 50.0 45.0 4.5
4 / 3.5 – 6.5 mm
4 / 6.0 – 10.0 mm
Pack
qty.
1
Cable entry plate Metal Type 105 (105x155 mm)
Efficient connection technology for terminal boxes and control cabinets for tool-free introduction of actuators, sensors, measuring and control instrumentation, optoelectronics,
pneumatic lines and drive technology into a control panel. KDPs of the product group 105
fits into standard cut-outs for Rittal and Sarel cabinets when combined with . These adapter
plates can be configured individually.
The stainless steel version is particularly suitable for application in the food and chemical
areas.
-30 – 90 °C
Plate: see article
Seal: NBR/EPDM
IP 65
Cut-out code:
105A
c
d
c
Øe
A
b
d
a
B
KDP 105/12...
Type
Order no.
Colour
Openings
total
Openings
quantity / Ø
Material
Plate
A
mm
B
mm
a
mm
b
c
d
e Pack
mm mm mm mm qty.
KDP 105/12 ALU 87663056
KDP 105/12 V4A 87663057
RAL 7035
smoothed
12
12
9 / 9.0 – 14.0 mm AlMg3 (3.3535) 105.0 155.0 132.0 82.0 71.5 46.5 5.5
2 / 12.0 – 18.0 mm V4A (1.4571) 105.0 155.0 132.0 82.0 71.5 46.5 5.5
1 / 18.0 – 25.0 mm
1
1
KDP 105/15 ALU 87663014
KDP 105/15 V4A 87663016
RAL 7035
smoothed
15
15
8 / 6.0 – 10.0 mm AlMg3 (3.3535) 105.0 155.0 132.0 82.0 71.5 46.5 5.5
4 / 9.0 – 14.0 mm V4A (1.4571) 105.0 155.0 132.0 82.0 71.5 46.5 5.5
3 / 12.0 – 18.0 mm
1
1
KDP 105/32 ALU 87663010
KDP 105/32 V4A 87663012
RAL 7035
smoothed
32
32
16 / 3.0 – 5.0 mm AlMg3 (3.3535) 105.0 155.0 132.0 82.0 71.5 46.5 5.5
12 / 4.0 – 8.0 mm V4A (1.4571) 105.0 155.0 132.0 82.0 71.5 46.5 5.5
4 / 6.0 – 10.0 mm
1
1
109
Cable entry plate KDP
Metal
Cable entry plate Metal Type 120 (120x190 mm)
Tool-less, rational connection technology for the electrical power sector. Performance cables and services are sealed and fed into control cabinets or terminal boxes and are supported stabley.
-30 – 90 °C
Plate: see article
Seal: NBR/EPDM
IP 65
Cut-out code:
120A
c
d
g
g
c
Øe
A
b
d
B
a
KDP 120/2...
110
Type
Order no.
Colour Openings
total
Openings
quantity / Ø
Material
Plate
A
mm
B
mm
a
b
c
d
e
g Pack
mm mm mm mm mm mm qty.
KDP 120/2 ALU
87663001 RAL 7035
2
2 / 18.0 – 36.0 mm AlMg3 (3.3535) 120.0 190.0 164.0 94.0 88.0 53.0 5.5 65.0
1
KDP 120/2 B ALU 87663002 RAL 7035
2
2 / 36.0 – 49.0 mm AlMg3 (3.3535) 120.0 190.0 164.0 94.0 88.0 53.0 5.5 65.0
1
KDP 120/2 C ALU 87663003 RAL 7035
2
1 / 18.0 – 36.0 mm AlMg3 (3.3535) 120.0 190.0 164.0 94.0 88.0 53.0 5.5 65.0
1 / 36.0 – 49.0 mm
1
KDP 120/17 ALU
87663004 RAL 7035
17
6 / 6.0 – 10.0 mm AlMg3 (3.3535) 120.0 190.0 164.0 94.0 88.0 53.0 5.5 65.0
4 / 9.0 – 14.0 mm
3 / 12.0 – 18.0 mm
4 / 18.0 – 25.0 mm
1
KDP 120/35 ALU
87663005 RAL 7035
35
8 / 3.5 – 6.5 mm AlMg3 (3.3535) 120.0 190.0 164.0 94.0 88.0 53.0 5.5 65.0
18 / 6.0 – 10.0 mm
7 / 9.6 – 15.9 mm
2 / 14.0 – 20.0 mm
1
Cable entry plate Metal Type 134 (134x254 mm)
Efficient connection technology for terminal housings and control cabinets for tool-free introduction of actuators, sensors, measuring and control instrumentation, optoelectronics,
pneumatic lines and drive technology into a control housing.
-30 – 90 °C
Plate: see article
Seal: NBR/EPDM
IP 65
Cut-out code:
134A
c
d
c
Øe
A
d
b
g
a
B
KDP 134/34...
Type
Order no.
Colour Openings
total
KDP 134/34 ALU 87663024 RAL 7035
34
Openings
quantity / Ø
Material
Plate
A
B
a
b
c
d
e
g Pack
mm mm mm mm mm mm mm mm qty.
2 / 3.0 – 5.0 mm AlMg3 (3.3535) 134.0 254.0 231.0 111.0 90.5 61.0
6 / 4.0 – 8.0 mm
15 / 6.0 – 10.0 mm
4 / 8.0 – 12.0 mm
5 / 9.0 – 14.0 mm
2 / 14.0 – 20.0 mm
5.5 121.0
1
111
Cable entry plate KDP
Metal
Cable entry plate Metal Type 149 (149x339 mm)
Efficient connection technology for terminal housings and control cabinets for tool-free introduction of actuators, sensors, measuring and control instrumentation, optoelectronics,
pneumatic lines and drive technology into a control housing. KDPs of product group 149 can
be fitted directly into the standard cut-outs of Rittal cabinets.
The stainless steel version is particularly suitable for application in the food and chemical
areas. Integrated threaded bolts mean that no screws are visible from outside. Mounting
set included in delivery.
-30 – 90 °C
Plate: see article
Seal: NBR/EPDM
IP 65
Cut-out code:
149A
c
c
Øe
d
A
g
g
b
d
a
B
KDP 149/56...
112
Type
Order no.
Colour Openings
total
Openings
quantity / Ø
Material
Plate
A
mm
B
mm
a
mm
b
mm
c
d
e
g
mm mm mm mm
Pack
qty.
KDP 149/56 V4A
87663086 smoothed
56
36 / 6.0 – 10.0 mm V4A (1.4571) 149.0 339.0 303.0 115.0 161.5 66.5 5.0 120.0
8 / 9.0 – 14.0 mm
8 / 14.0 – 18.0 mm
4 / 18.0 – 25.0 mm
1
KDP 149/158 V4A 87663068 smoothed
158
126 / 3.5 – 6.2 mm V4A (1.4571) 149.0 339.0 303.0 115.0 161.5 66.5 5.0 120.0
24 / 6.0 – 10.0 mm
6 / 8.0 – 12.0 mm
2 / 12.0 – 18.0 mm
1
Cable entry plate Metal Type 149 (149x534 mm)
Efficient connection technology for terminal housings and control cabinets for tool-free introduction of actuators, sensors, measuring and control instrumentation, optoelectronics,
pneumatic lines and drive technology into a control housing. KDPs of product group 149 can
be fitted directly into the standard cut-outs of Rittal cabinets.
-30 – 90 °C
Plate: see article
Seal: NBR/EPDM
IP 65
Cut-out code:
149B
c
g
A
c
g
g
g
Øe
d
b
d
B
a
KDP 149/46...
Type
Order no.
Colour Openings
total
Openings
quantity / Ø
Material
Plate
A
mm
B
mm
a
mm
b
mm
c
d e
g
mm mm mm mm
Pack
qty.
KDP 149/46 ALU
87663064 RAL 7035
46
8 / 6.0 – 10.0 mm AlMg3 (3.3535) 149.0 534.0 432.0 102.0 259.0 66.5 4.0 110.0
16 / 10.0 – 14.0 mm
18 / 12.0 – 18.0 mm
4 / 18.0 – 25.0 mm
1
KDP 149/140 V4A 87663088 smoothed
140
16 / 3.5 – 6.2 mm
64 / 4.5 – 8.5 mm
36 / 6.0 – 10.0 mm
4 / 8.0 – 12.0 mm
8 / 9.0 – 14.0 mm
8 / 14.0 – 18.0 mm
4 / 18.0 – 25.0 mm
V4A (1.4571) 149.0 534.0 500
115 259.0 66.5 5.0 110.0
1
KDP 149/292 V4A 87663066 smoothed
292
250 / 3.5 – 6.2 mm
32 / 6.0 – 10.0 mm
8 / 8.0 – 12.0 mm
2 / 12.0 – 18.0 mm
V4A (1.4571) 149.0 534.0 500
115 259.0 66.5 5.0 110.0
1
113
Cable entry plate KDP
Metal
Mounting screw-on mounting type KDP x/x ALU
Set cable entry plate onto the cut-out and screw down.
Where necessary, remove the optional black cover from the locking
plate. To do so, press the opening through from the rear until the
cover falls out.
Select an opening appropriate for the cable diameter and push the
cable through the opening from the front. The indicator becomes
visible on the rear side. Pull cable through to desired length.
Retract cable approx. 10 – 15 mm until the indicator on the rear is
no longer visible. Depending on cable diameter and insertion size,
the indicator may well become visible on the front side again.
114
Mounting screw-on mounting type KDP x/x V4A
Set cable entry plate onto the cut-out and screw down from the rear.
Where necessary, remove the optional black cover from the locking
plate. To do so, press the opening through from the rear until the
cover falls out.
Select an opening appropriate for the cable diameter and push the
cable through the opening from the front. The indicator becomes
visible on the rear side. Pull cable through to desired length.
Retract cable approx. 10 – 15 mm until the indicator on the rear is
no longer visible. Depending on cable diameter and insertion size,
the indicator may well become visible on the front side again.
115
116
Cable entry plate KDP/BG-FB
plastic bus enclosure
117
Cable entry plate KDP/BG-FB
plastic bus enclosure
Advantages
All inclusive
This fully integrated enclosure
has everything you'll need.
Self-extinguishing enclosure
with integrated cable entry
system and pre-mounted top
hat rail.
Ideal for installation of bus terminal block.
Indicator lights remain visible from outside even when
cover is closed. This enables
disruptions to be recognised
quickly.
118
✔Fully integrated enclosure
✔Integrated cable entry plate
✔Integrated top hat rail
✔High protection class
✔Transparent cover
✔Quick installation
Overview
Cable entry plate KDP
plastic bus enclosure
Bus enclosure with integrated cable entry plate.
Ideal for applications with WAGO or Beckhoff I/O
clamps. With an integrated top hat rail and cable
entry plate.
Page 121
Assembly and configuration of the
KDP plastic bus enclosure
Detailed configuration and assembly instructions
on cable entry plates and bus enclosures.
Page 122
119
Cable entry plate KDP/BG-FB
plastic bus enclosure
Selection table KDP/BG-FB (possible combinations of cable entries)
The cable entry plate KDP plastic bus enclosure is a complete bus enclosure with an integrated cable entry plate, preinstalled support bar TS 35x15
(EN 50022-35) and transparent cover.
The bus enclosure is supplied ready for installation, thereby effectively reducing costs. Ideal for applications with WAGO, Murrelektronik or Beckhoff I/O
modules. Indicator lights remain visible even when cover is closed. Protection
class IP 65.
Number of openings on the cable entry plate
corresponds to cable diameter
BG-FB KDP 70
Item no. 87663008
Ø mm
Ø mm
Ø mm
Ø mm
Ethernet
3.0–5.0
3.0–6.2
4.0–8.0
7.0–11.5
RJ45
9
52
4
4
1
Material data for the cable entry plate plastic bus enclosure
Halogen-free
Phosphorous-free
Cadmium-free
Asbestos-free
Lead-free
Silicone-free
120
The type BG-FB KDP 70 complies with
ROHS and features IP class 65. It is also
free of halogen, phosphorous, cadmium,
asbestos, lead and silicone.
It can be used within a temperature
range of -30 to 90 °C.
The cable entry plate plastic bus enclosure is inspected according to fire protection V0. It is made of polycarbonate
and the sealant is made of NBR/EPDM.
Bus enclosure
Bus enclosure with integrated cable entry plate. Ideal for applications with WAGO, Murrelek­
tronik or Beckhoff I/O modules. Simple and quick mounting, since all required pieces like
top hat rail and cable entry plate are already integrated.
• Transparent cover Indicator lights remain visible even when cover is closed
• High protection class IP65
• Integrated cable entry system
• Premounted mounting plate with support bar TS 35x15 (EN 50022-35)
-30 – 90 °C
PC polycarbonate
NBR/EPDM
Enclosure: V0
IP 65
Type
Order no.
Colour
Openings
total
Openings
Quantity / Ø
Pack
qty.
BG-FB KDP 70
87663008
grey / transparent
70
9 / 3.0 – 5.0 mm
52 / 3.0 – 6.2 mm
4 / 4.0 – 8.0 mm
4 / 7.0 – 11.5 mm
1 / Ethernet RJ45
1
121
Cable entry plate KDP/BG-FB plastic
bus enclosure
Configuration and mounting of cable entry plate KDP/BG-FB
Release cover seals and lift housing cover.
Where necessary, remove the optional black cover from the locking
plate. To do so, press the opening through from the rear until the
cover falls out.
Select an opening appropriate for the cable diameter and push the
cable through the opening from the front. The indicator becomes
visible on the rear side. Pull cable through to desired length.
Retract cable approx. 10 – 15 mm until the indicator on the rear is
no longer visible. Depending on cable diameter and insertion size,
the indicator may well become visible on the front side again.
Following successful installation of all elements, replace cover on
top and latch down.
122
Cable entry plate KDP plastic
for Rose enclosure
123
Cable entry plate KDP plastic,
Rose enclosure
Advantages
Straight in!
Even in Rose
enclosure!
Install electric cable and pneumatic conduits with minimal
effort, saving time and money.
The KDP cable entry system is
ideal if space is at a premium.
The cable entry plate KDPBG for Rose enclosure can be
fixed directly onto the housing
with the two supplied flange
wedges.
The pre-fabricated cut-outs
are easy to insert individually,
even without tools.
The principle is absolutely
identical to our tried-and-true
plastic KDP/N 24 (rectangular).
124
✔Assembly without tools
✔Huge time savings
✔Cost reductions
✔High protection class
✔Variable
✔Designed for Rose enclosure
Overview
Cable entry plate KDP
type rose
Cable entry plate for installation in Rose polyester
flange housing PG14. Very quick, tool-free mounting with 2 flange wedges.
Page 127
Configuration and assembly
of the KDP type Rose
Detailed configuration and assembly instructions
on cable entry plates and bus enclosures.
Page 128
125
Cable entry plate KDP
plastic Rose enclosure
Selection table KDP/BG Rose (possible combinations of cable entries)
The cable entry plates type KDP/BG have been specially developed for Rose
polyester flange enclosures PG14. With 2 flange wedges included in delivery,
the KDP/BG is simply affixed to the enclosure.
The type KDP/BG is suited for electro and pneumatic installation. Extremely
quick and easy, tool-free assembly. Protection class IP 65.
Number of openings on the cable entry plate
corresponds to cable diameter
Ø mm
3.0–5.0
KDP-BG 40 Rose
Item no. 87663099
Ø mm
4.5–8.5
Ø mm
Ø mm
Ø mm
Ø mm Ethernet
6.0–10.0 8.0–12.0 9.0–14.0 14.0–20.0 RJ45
16
Item no. 87663098
KDP-BG 56+1 Rose
Ø mm
3.5–6.5
8
40
16
4
6
4
2
1
Material data for the plastic cable entry plate Rose enclosure
Halogen-free
Phosphorous-free
Cadmium-free
Asbestos-free
Lead-free
Silicone-free
126
The plastic cable entry plate Rose enclosure complies with ROHS and features IP
class 65.
It is also free of halogen, phosphorous,
cadmium, asbestos, lead and silicone.
It can be used within a temperature
range of -30 to 90 °C.
The cable entry plate plastic Rose
enclosure is inspected according to fire
protection V0.
It is made of GFK polyester and the sealant is made of NBR/EPDM.
Cable entry plate Metal, type KDP/BG Rose
-30 – 90 °C
GFK Polyester
NBR/EPDM
Enclosure: V0
IP 65
Cable entry plate for installation in Rose polyester flange housing PG14.
Very quick, tool free mounting with 2 flange wedges.
• Tool-free assembly
• High protection class IP65
• Flange wedges (2 pieces) included with delivery
• Suited for electric and pneumatic installations
• Casing not included with delivery
101
199
Type
Order no.
Colour
Openings
total
Openings
quantity / Ø
Pack
qty.
KDP-BG 40 Rose
87663098
grey
40
16 / 3.5 – 6.5 mm
16 / 6.0 – 10.0 mm
6 / 9.0 – 14.0 mm
2 / 14.0 – 20.0 mm
1
KDP-BG 56+1 Rose
87663099
grey
57
8 / 3.0 – 5.0 mm
40 / 3.5 – 6.5 mm
4 / 4.5 – 8.5 mm
4 / 8.0 – 12.0 mm
1 / Ethernet RJ45
1
Matches polyester flange housing from Rose Systemtechnik
Version with polyester cover
170 x 270 x 135 with 2 flange openings
14.010000
270 x 270 x 135 with 4 flange openings
14.020000
270 x 540 x 135 with 6 flange openings
14.030000
Version with clear polycarbonate cover
170 x 270 x 150 with 2 flange openings
270 x 270 x 150 with 4 flange openings
270 x 540 x 150 with 6 flange openings
14.010001
14.020001
14.030001
127
Cable entry plate KDP
Rose enclosure, plastic
Configuration and mounting of cable entry plate KDP/BG Rose
Set cable entry plate into the enclosure.
Press on the cable entry plate and press the flange wedges in until
stopping point.
Where necessary, remove the optional black cover from the locking
plate. To do so, press the opening through from the rear until the
cover falls out. Select an opening appropriate for the cable diameter
and push the cable through the opening from the front. The indicator becomes visible on the rear side. Pull cable through to desired
length.
RJ 45
Insertion of a cable with a RJ45 plug is only possible at one position.
Push cable with plug through the entry from the front. The indicator becomes visible on the rear side. Pull cable through to desired
length.
Retract cable approx. 10 – 15 mm until the indicator on the rear is
no longer visible. Depending on cable diameter and insertion size,
the indicator may well become visible on the front side again.
128
Download PDF
Similar pages