FR Mode d’emploi
ES Instrucciones para el uso
I T Istruzioni per l’uso
EN
FR Instructions
Mode d’emploi
PT
de utilização
ES Instruções
Instrucciones
para el uso
CS
k použití
I T Návod
Istruzioni
per l’uso
PL
obsługi
EN Instrukcja
Instructions
RU
эксплуатации
PT Инструкции
Instruções deпо
utilização
DE
CS Bedienungsanleitung
Návod k použití
NL
PL Gebruiksaanwijzingen
Instrukcja obsługi
DA
Brugervejledning
RU Инструкции
по эксплуатации
SK
na použitie
DE Návod
Bedienungsanleitung
HU
kézikönyv
NL Használati
Gebruiksaanwijzingen
SV
DA Bruksanvisning
Brugervejledning
NO
SK Instruksjonsveiledning
Návod na použitie
FI
HU Käyttöopas
Használati kézikönyv
SV Bruksanvisning
NO Instruksjonsveiledning
FI Käyttöopas
MACHINE À CAFÉ AUTOMATIQUE
CAFETERA AUTOMÁTICA
MACCHINA PER CAFFÉ AUTOMATICA
AUTOMATIC
COFFEE
MAKER
MACHINE À CAFÉ
AUTOMATIQUE
MÁQUINA
CAFÉ AUTOMÁTICA
CAFETERA DE
AUTOMÁTICA
PŘÍSTROJ
PŘÍPRAVU
KÁVY A CAPPUCCINA
MACCHINANAPER
CAFFÉ AUTOMATICA
AUTOMATYCZNY
EKSPRES
AUTOMATIC COFFEE
MAKERDO KAWY
Автоматическая
MÁQUINA DE CAFÉкофемашина
AUTOMÁTICA
KAFFEEVOLLAUTOMAT
PŘÍSTROJ NA PŘÍPRAVU KÁVY A CAPPUCCINA
AUTOMATISCH
AUTOMATYCZNYKOFFIEZETAPPARAAT
EKSPRES DO KAWY
CAPPUCCINOOG KAFFEMASKINE
Автоматическая
кофемашина
PRÍSTROJ
NA PRÍPRAVU KÁVY A CAPPUCCINA
KAFFEEVOLLAUTOMAT
KÁVÉ-ÉS
CAPPUCCINO
KÉSZÍTŐ GÉP
AUTOMATISCH
KOFFIEZETAPPARAAT
KAFFEMASKIN
FÖRKAFFEMASKINE
ESPRESSO OCH CAPPUCCINO
CAPPUCCINO- OG
KAFFEOGNA
CAPPUCCINOMASKIN
PRÍSTROJ
PRÍPRAVU KÁVY A CAPPUCCINA
KAHVICAPPUCCINOKEITIN
KÁVÉ-ÉSJACAPPUCCINO
KÉSZÍTŐ GÉP
KAFFEMASKIN FÖR ESPRESSO OCH CAPPUCCINO
KAFFE- OG CAPPUCCINOMASKIN
KAHVI- JA CAPPUCCINOKEITIN
EN
Dear valued customer,
To discover a De Dietrich product is to experience the range of unique emotions
which only high-value items can produce.
The attraction is immediate, from the moment you set eyes on the product. The
sheer quality of the design shines through thanks to the timeless style and
outstanding finishes which make each appliance an elegant and refined little
masterpiece in its own right, each in perfect harmony with the others.
Next, comes the irresistible urge to touch it. De Dietrich's design makes extensive
use of robust and prestigious materials. The accent is placed firmly upon
authenticity.
By combining state-of-the-art technology with top quality materials, De Dietrich
produces beautifully crafted products to help you get the most from the culinary
arts, a passion shared by all lovers of cooking and fine food.
We hope that you enjoy using this new appliance and we would love to receive
your suggestions and to answer any questions you may have. Please feel free to
contact our customer service department via our website.
To benefit from the many advantages offered by the brand, we recommend that
you register your product at: www.de-dietrich.com.
Thank you for choosing a De Dietrich product.
De Dietrich
You can find a full range of information about the brand at www.de-dietrich.com
Visit the De Dietrich Gallery, 6 rue de la Pépinière (Paris eighth district)
Open from Tuesday to Saturday from 10 am to 7 pm
Customer service department: 0892 02 88 04
As part of our commitment to constantly improving our products, we reserve the right to make
changes to them based on advances to their technical, functional and/or aesthetic properties.
Important:
Before installing and using your appliance, please read this Installation and Usage
Guide carefully, as it will allow you to quickly familiarise yourself with its operation.
3
Cleaning the spouts......................................................13
Cleaning the pre-ground coffee funnel.........................13
Cleaning the inside of the coffee machine....................13
Cleaning the infuser......................................................13
Cleaning the milk container..........................................14
CONTENTS
INTRODUCTION......................................................................5
Symbols used in these instructions.................................5
Letters in brackets...........................................................5
Troubleshooting and repairs...........................................5
PRELIMINARY CHECKS...........................................................7
Checking the appliance...................................................7
Installing the appliance..................................................7
Connecting the appliance...............................................7
MENU SETTINGS...................................................................14
Rinsing..........................................................................14
Set language.................................................................15
Energy saving................................................................15
Set time........................................................................15
Auto start......................................................................15
Auto off (Standby)........................................................15
Set temperature............................................................16
Water hardness.............................................................16
Contrast........................................................................16
Buzzer..................................................................................... 16
Statistics.......................................................................16
Default values...............................................................16
Descaling......................................................................17
DISPOSAL...............................................................................7
TURNING THE APPLIANCE OFF.............................................17
BUILT-IN INSTALLATION.........................................................7
TECHNICAL DATA..................................................................17
USING THE APPLIANCE FOR THE FIRST TIME..........................9
DISPLAYED MESSAGES.........................................................18
TURNING ON AND HEATING UP..............................................9
TROUBLESHOOTING.............................................................19
SAFETY...................................................................................5
Fundamental safety warnings........................................5
Designated use...............................................................6
Instructions.....................................................................6
DESCRIPTION..........................................................................6
Description of the appliance ...........................................6
Description of the control panel......................................7
Description of milk container and accessories.................7
MAKING COFFEE USING COFFEE BEANS ..............................10
CHANGING THE QUANTITY OF COFFEE IN THE CUP..............10
Programming quantity.................................................10
ADJUSTING THE COFFEE MILL..............................................11
MAKING ESPRESSO COFFEE WITH PRE-GROUNDED COFFEE
(INSTEAD OF BEANS) ...........................................................11
DELIVERING HOT WATER......................................................11
CHANGING THE QUANTITY OF HOT WATER...........................11
MAKING CAPPUCCINO .........................................................11
CHANGING THE QUANTITY OF MILK AND COFFEE FOR
CAPPUCCINO........................................................................12
MAKING LATTE MACCHIATO.................................................12
CHANGING THE QUANTITY OF COFFEE AND MILK FOR LATTE
MACCHIATO..........................................................................12
CLEANING.............................................................................13
Cleaning the machine...................................................13
Cleaning the grounds container....................................13
Cleaning the drip tray...................................................13
Cleaning the water tank................................................13
4
considered improper and thus dangerous. EN
The manufacturer is not liable for damage
deriving from improper use of the appliance.
The surface of the heating element remains
hot after use and the outside of the appliance may retain the heat for several minutes
depending on use.
Clean all the components thoroughly, taking
particular care with parts in contact with the
coffee and milk.
Cleaning and user maintenance shall not be
made by children without supervision.
Never immerse the appliance in water.
CAUTION: To prevent damage to the appliance do not use alkaline cleaning agents
when cleaning, use a soft cloth and a mild
detergent
This is an household appliance only. It is not
intended to be used in: staff kitchen areas in
shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments;
bed and breakfast type environments.
If the plug or power cable is damaged, it
must be replaced by customer services only
to avoid all risk.
Appliances with removable cord: avoid
splashes of water on the power cord connector or socket at the back of the appliance.
WARNING: Models with glass surfaces:
do not use the appliance if the surface is
cracked.
INTRODUCTION
Symbols used in these instructions
Important warnings are identified by these symbols.
Failure to observe the instructions could result in electric shock,
serious injury, burns, fire or damage to the appliance.
Danger!
Failure to observe the warning could result in possibly life threatening injury from electric shock.
Important!
Failure to observe the warning could result in injury or damage
to the appliance.
Danger of burns!
Failure to observe the warning could result in scalds or burns.
Please note:
This symbol identifies important advice or information for the
user.
Letters in brackets
The letters in brackets refer to the legend in the Description of
the Appliance on page 3.
Troubleshooting and repairs
In the event of problems, follow the information given in the
sections “Displayed messages” and “Troubleshooting”.
If this does not resolve the problem, you should consult Customer Services. For repairs, contact Customer Services only.
SAFETY
Fundamental safety warnings
The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
Designated use: this appliance is designed
FOR EUROPEAN MARKETS ONLY:
and made to prepare coffee and milk based
This appliance can be used by children aged
beverages and hot water. Any other use is
5
from 8 years and above if they have been
given supervision or instruction concerning
use of the appliance in a safe way and if they
understand the hazard involved. Cleaning
and user maintenance shall not be made
by children unless they are older than 8 and
supervised. Keep the appliance and its cord
out of the reach of children aged less than
8 years.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance.
When not in use and before cleaning, always
unplug the appliance.
and steam may form while it is in operation.
Avoid contact with splashes of water or hot steam. Use knobs
and handles.
Important! Do not hold on to the coffee machine
when it is out of the cabinet.
Do not rest recipients containing liquids or inflammable or corrosive materials on top of the appliance. Place the accessories
required to make the coffee (the measure for example) in the
special holder. Do not rest large objects which could obstruct
movement or unstable objects on the appliance.
Important! Do not use the appliance when extracted.
Make sure the appliance is inactive before extracting it. The only
exception is adjusting the coffee mill which must be done with
the machine extracted (see section “Adjusting the coffee mill”).
Please note: Use original or manufacturer recommended accessories and spare parts only.
Designated use
This appliance is designed and made to prepare coffee and heat
drinks. All other use is considered improper.
This appliance is not suitable for commercial use.
The manufacturer is not liable for damage deriving from improper use of the appliance.
This appliance can be installed over a built-in oven if the latter
is fitted with a cooling fan at the rear (maximum microwave
power: 3 kW).
Surfaces marked with this symbol become hot during use (the symbol is present
in certain models only).
Instructions
Read these instructions carefully before using the appliance.
• Keep these instructions.
• Failure to respect these instructions may result in burns or
damage to the appliance.
The manufacturer is not liable for damage deriving from
failure to respect these instructions.
Danger! This is an electrical appliance, it is therefore
important to respect the following safety warnings:
• Never touch the appliance with damp hands.
• Never touch the plug with damp hands.
• Make sure the socket used is freely accessible at all times,
enabling the appliance to be unplugged when necessary.
• Unplug directly from the plug only.
Never pull the power cable as you could damage it.
• To disconnect the appliance completely, place the main
switch (A23) on the side of the appliance in the 0 position.
• If the appliance is faulty, do not attempt to repair.
Turn it off using the main switch (A23), unplug from the
mains socket and contact Customer Services.
Please note: The appliance has a cooling fan.
This comes on whenever coffee, steam or hot water is delivered.
After several minutes, the fan goes off automatically.
Important! Never turn off the machine during descaling.
DESCRIPTION
Description of the appliance
Important! Keep all packaging (plastic bags, polystyrene foam) away from children.
(page 3 - A)
A1. Cup tray
A2. Service door
Danger of burns! This appliance produces hot water
6
A3. Coffee guide
A4. Waste coffee container
A5.Infuser
A6. Cup tray lights
A7. On/stand-by button
A8. Control panel
A9. Tray
A10.Hot water and steam nozzle
A11. IEC connector
A12.Water tank
A13.Coffee spout (adjustable height)
A14.Drip tray
A15.Bean container lid
A16.Bean container
A17.Grinding adjustment dial
A18.Pre-ground coffee funnel door
A19.Measure
A20. Measure compartment
A21.Pre-ground coffee funnel
A22.Power cable
A23.Main switch
A24. Safety grid
PRELIMINARY CHECKS
Checking the appliance
After removing the packaging, make sure the product is complete and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact Customer Services.
Installing the appliance
•
•
•
•
Important!
Installation must be performed by a qualified professional
in compliance with legislation in force in the country of installation (see section “Built-in installation”).
The packing elements (plastic bags, polystyrene foam, etc.)
should be kept out of reach of children.
Never install the appliance in rooms where the temperature
may drop to 0°C or lower.
Customise the water hardness as soon as possible following
the instructions in the “Water hardness” section.
Connecting the appliance
Danger! Check that the mains power supply voltage
corresponds to the value indicated on the rating plate on the
bottom of the appliance.
Connect the appliance to an efficiently earthed and correctly installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified professional. To comply with safety directives, an omnipolar switch
with a minimum contact distance of 3 mm must be installed.
Do not use multiple sockets or extensions.
Description of the control panel
(page 3 - B)
B1. Display: guides the user in using the appliance.
B2.
icon to select the coffee taste
B3.
icon to select the type of coffee (espresso, coffee, long
coffee)
B4.
icon to make one cup of coffee and confirm the selected function
B5.
icon to make two cups of coffee and scroll backwards
through the menu to display the various modes
B6.
icon to deliver hot water and scroll forwards through
the menu to display the various modes
B7.
icon to enable or disable menu parameter setting mode
and exit from the chosen mode
B8.
icon to make cappuccino
B9.
icon to make latte macchiato
Important! Safety cutout devices must be included
in the mains power supply in compliance with the installation
regulations in the country concerned.
DISPOSAL
Description of milk container and accessories
(page 3 - C)
C1. Froth regulator
C2. Milk container handle
C3. CLEAN button
C4. Milk intake tube
C5. Frothed milk spout
C6. Milk frother
C7. Hot water spout
The appliance must not be disposed of with household waste, but taken to an authorised waste separation and recycling centre.
BUILT-IN INSTALLATION
Verify the minimum measurements required for correct installation of the appliance. The coffee machine must be installed in
a column and the column must be firmly fixed to the wall with
commercially available brackets.
7
EN
m
m
24 m
8 mm
372 mm
560 +
200 cm2
528 m
x1
m
456 mm
m
ure. Fix with the screws provided, then extract them completely.
If the coffee machine is installed over a warmer drawer, use the
top surface of this as a reference to position the rails.
m
45 m
In this case, there will be no surface to rest the rails on.
m
45 m
200 cm2x
mm
45 mm
m
1
x1
x. 350
appro
mm
45 m
m
45 m
Fix the power cable with the clip.
The power
cable must be long enough to allow the appliance toapprox. 350 mm
45 mm
be extracted from the cabinet to fill the coffee bean container.
The appliance must be earthed in compliance with legislation.
Electrical connections must be performed by a qualified electrician following the instructions.
m
560 +
8 mm
450 + 2 mm
8 mm
850 mm Min 450 + 2 mm
45 m
m
45 m
m
m
500
Min.
mm
545
m
45 m
mm
500
Min.
mm
545
45 mm
m
45 m
200 cm2
45 mm
8
200 cm2
mm
560 +
m
45 m
560 +
mm
500 in the figmmrails on the sides of the cabinet as shown
Min.
Position8the
mm
545
m
45 m
x1
412
595 m
m
45 m
m
m
500
Min.
mm
545
361
x2
380 + 2 mm
30
m
m
•
x 16
850 mm Min
•
Important!
Important: all installation or maintenance operations must
m
be performed with the appliance disconnected
45 m from the
mains electricity supply.
Kitchen furniture in direct contact with the appliance must
m
be heat resistant (65°C min).
98 m
m 3bottom
594 m leave a gap45atmthe
To guarantee correct ventilation,
m
of the cabinet (see measurements in figure).
850 mm Min 380 + 2 mm
•
378 mm
20 m
850 mm Min
560 +
x2
x 16
8m
x. 350
x4
x8
x4
When the message “PRESS OK TO SET TO ENGLISH” is displayed, press the
icon (B4) (fig. 3) for 3 seconds until
“ENGLISH SET” is displayed. If you set the wrong language,
follow the instructions in the “Setting the language” section.
If your language is not available, select one from those displayed (the instructions refer to English).
Then follow the instructions displayed:
4. Place a cup under the hot water spout (fig. 5).
(If the hot water spout is not inserted, the appliance displays “INSERT WATER SPOUT”. Attach the spout as shown
in figure 6. The machine displays “HOT WATER PRESS OK”.
Press the
icon (B4), a little water comes out of the
spout.
5. After that the machine displays “TURNING OFF PLEASE
WAIT” and goes off.
6. Extract the appliance by pulling it out using the handles
(fig. 7).
Open the lid and fill the container with coffee beans, then
close the lid and push the appliance in.
The coffee machine is now ready for normal use.
x8
Position the appliance on the rails, making sure the pins are
correctly inserted in the housings, then fix it with the screws
supplied.
If the height of the appliance requires adjusting, use the spacer
disks provided.
x4
560 +
x4
Important! Never introduce pre-ground coffee,
freeze dried coffee, caramelised beans or anything else which
could damage the appliance.
1 mm
560 +
1 mm
Please note: When using the appliance for the first
time, you need to make 4-5 cups of coffee and 4-5 cappuccinos
before the appliance gives satisfactory results.
mm
Please note: Each time you turn the coffee machine
on by the main switch (A23), it performs an AUTO DIAGNOSTICS
cycle and then goes off.
To turn it on again, press the ON/stand-by button (A7) (fig. 1)
If necessary, correct alignment of the appliance by positioning
the spacers supplied under or at the sides of the support.
TURNING ON AND HEATING UP
USING THE APPLIANCE FOR THE FIRST TIME
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this cycle.
•
Coffee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of coffee
in the mill.
• Customise water hardness as soon as possible following
the instructions in the “Water hardness” section.
1. Connect the appliance to the mains electricity supply and
place the main switch (A23) in position I.
2. The appliance displays “FILL TANK” in different languages.
Extract the water tank (fig. 4), rinse and fill with fresh water
without exceeding the MAX line. Replace and push as far as
it will go.
3. Choose the language (the languages scroll through at intervals of about 3 seconds):
Danger of burns! During rinsing, a little hot water
flows from the coffee spouts.
To turn the appliance on, press the ON/stand-by button (A7) (fig.
1). The message “HEATING UP PLEASE WAIT” is displayed.
When heating is complete, the message changes to “RINSING”.
The appliance is at temperature when the message “COFFEE
STANDARD” is displayed.
9
EN
To clean, open the service door on the front of the appliance
by pulling the spout (fig. 16), extract the drip tray (fig. 17) and
clean.
MAKING COFFEE USING COFFEE BEANS
1. The appliance is preset to make coffee with a standard
taste. You can choose coffee with an extra mild, mild,
standard, strong or extra strong taste. There is also a preground coffee option. To choose the required taste, press
the
icon (B2) (fig. 8) a number of times. The required
coffee taste is displayed.
2. Place 1 cup under the spouts to make 1 coffee (fig. 9) or 2
cups for 2 coffees (fig. 9).
Lower the spouts as near as possible to the cup for a creamier coffee (fig. 10).
3. Press the
icon (B3) (fig. 11) to select the type of coffee
(espresso, coffee, long coffee).
Now press the
icon (B4) (fig. 12) if you want to make
one coffee and the
icon (B5) (fig. 13) if you want to
make 2 coffees. The appliance now grinds the beans and
starts delivering the coffee into the cup.
Once the set amount of coffee has been delivered, the machine stops delivery automatically and expels the exhausted coffee grounds into the grounds container.
4. After a few seconds, the appliance is ready for use again.
5. To turn the appliance off, press the ON/stand-by button
(A7) (fig. 1).
(Before going off, the appliance performs an automatic
rinse cycle. Take care to avoid scalds).
NOTE 1: If the coffee is delivered a drop at a time or not at all, see
section “Adjusting the coffee mill”.
NOTE 2: If the coffee is delivered too fast and the cream is not
satisfactory, see section “Adjusting the coffee mill”.
NOTE 3: Tips for a hotter coffee:
• Proceed as described in the section “Menu settings”, “rinsing” function.
• Unless preheated, do not use excessively thick cups as they
will absorb too much heat.
• Preheat the cups by rinsing them with hot water.
NOTE 4: Coffee delivery can be interrupted at any moment by
re-pressing the previously selected icon which remains lit during
the operation.
NOTE 5: As soon as delivery is finished, to increase the quantity of
coffee in the cup, just keep pressing the previously selected icon
within 3 seconds after delivery has finished.
NOTE 6: When the appliance displays “FILL TANK”, fill the tank
with water or the appliance will not deliver coffee. (It is normal
for there to be a little water left in the tank).
NOTE 7: After about 14 single (or 7 double) coffees, the appliance
displays “EMPTY GROUNDS CONTAINER”.
Even if not full, the empty waste coffee container message is displayed 72 hours after the first coffee has been delivered.
For the 72 hours to be calculated correctly, the machine must
never be turned off with the main switch in the 0 position.
When cleaning, always extract the drip tray completely.
Important! When extracting the drip tray, the
grounds container MUST always be emptied.
If this is not done, the machine may be clogged.
NOTE 8: Never extract the water tank while the machine is delivering coffee.
If it is removed, it will not be possible to make the coffee and the
appliance will display some messages (see page 21).
CHANGING THE QUANTITY OF COFFEE IN THE CUP
The appliance is set by default to make a standard quantity of
coffee.
To select the quantity of coffee, press the
icon (B3) (fig.
11) repeatedly until the message corresponding to the required
quantity of coffee is displayed:
Corresponding coffee
quantity (ml)
ESPRESSO
≃30
MEDIUM CUP
≃110
LARGE CUP
≃150
Program quantity
To modify the quantity of coffee delivered, proceed as follows:
1. Place a cup under the coffee spouts ( fig. 9).
2. Keep the
icon (B4) (fig. 12) pressed until the message
“PROGRAM QUANTITY” is displayed and coffee delivery begins. Then release the icon.
3. As soon as the coffee in the cup reaches the required level,
press the same icon again.
The quantity set has now been programmed.
10
the “Cleaning the infuser” chapter.
ADJUSTING THE COFFEE MILL
The coffee mill is preset in the factory and should not require
adjusting.
However, if after making the first few coffees you find that delivery is either too fast or too slow (a drop at a time), this can
be corrected by adjusting the grinding adjustment dial (fig. 14).
DELIVERING HOT WATER
•
•
•
Important! The grinding adjustment dial must only
be turned when the coffee mill is in operation.
Make sure the water spout is in place (fig. 6).
Position a container under the spout.
Press the icon (B6) (fig. 20).
The message “HOT WATER” is displayed and hot water flows
out of the hot water spout into the container below.
You should not deliver hot water for more than 2 minutes at
a time.
To interrupt the flow, press the icon (B6).
The appliance stops delivery once the set quantity is
reached.
CHANGING THE QUANTITY OF HOT WATER
The appliance is set by default to automatically deliver approx
250 ml.
To modify these quantities, proceed as follows:
1. Position a container under the spout.
2. Press the icon (B6) again until “HOT WATER PROGRAM
QUANTITY” is displayed, then release the icon (B6).
3. When the hot water in the cup reaches the required level,
press the icon (B6) again.
The machine is now reprogrammed with the new quantity.
For slower delivery and creamier coffee, turn one click anticlockwise (finer pre-ground coffee).
For faster delivery (not a drop at a time), turn one click clockwise
(coarser pre-ground coffee).
MAKING ESPRESSO COFFEE WITH PRE-GROUND
COFFEE (INSTEAD OF BEANS)
MAKING CAPPUCCINO
•
Press the
icon (B2) (fig. 8) and select the pre-ground
coffee function.
• Extract the machine by pulling it outwards using the handles (fig. 7).
• Lift the central lid, place one measure of pre-ground coffee
in the funnel (fig. 19), push the appliance in then proceed
as described in the section “Making coffee using coffee
beans”.
Please note: You can make just one coffee at a time by
pressing the
icon (B4) (fig. 12).
• After using the machine with pre-ground coffee, to go back
to making coffee using beans, disable the pre-ground coffee function by pressing the
icon (B2) (fig. 8) again.
NOTE 1: Never introduce pre-ground coffee when the machine is
off or it could spread through the inside of the appliance.
NOTE 2: Never add more than 1 measure, otherwise the appliance will not make the coffee.
NOTE 3: Use the measure provided only.
NOTE 4: Introduce only pre-ground coffee for espresso coffee
machines into the funnel.
NOTE 5: If more than one measure of pre-ground coffee is used
and the funnel clogs, push the coffee down with a knife (fig. 21)
then remove and clean the infuser and machine as described in
•
•
•
•
11
Select the taste of the coffee you want to use to make the
cappuccino by pressing the
icon (B2).
Remove the lid of the milk container.
Fill the container with about 100 ml of milk for each cappuccino to be prepared (fig. 23).
Never exceed the MAX level (corresponding to about 750
ml) marked on the container.
You should ideally use skimmed or semi-skimmed milk at
refrigerator temperature (about 5°C).
Make sure the intake tube is correctly inserted in the rubber
washer (fig. 24) then replace the milk container lid.
Position the froth regulator between the words cappuccino
and caffe latte printed on the milk container lid.
The quality of froth can be adjusted by moving the regulator towards the word “caffe latte” for a denser froth (hot
milk). Moving it towards the word “cappuccino” obtains a
less dense froth.
EN
2. Place a cup under the coffee spouts and milk spout.
3. Hold the
icon (B8) until the message “MILK FOR CAPPUCCINO PROGRAM QUANTITY” is displayed.
4. Release the icon. The appliance starts delivering milk.
5. Once the required quantity of milk has been delivered into
the cup, press the
icon (B8) again.
6. After a few seconds, the appliance starts delivering coffee
into the cup and the message “COFFEE F. CAPPUCCINO
PROGRAM QUANTITY” is displayed.
7. Once the required quantity of coffee has been delivered
into the cup, press the
icon (B8) again. Coffee delivery
stops.
The machine is now reprogrammed with the new milk and coffee quantities.
no froth (hot milk)
“Denser” froth
Froth regulator
“Less dense” froth
Remove the hot water spout (fig 6) and attach the milk
container to the nozzle (fig. 25).
• Position the milk tube as shown in fig. 26 and then place a
sufficiently large cup under the coffee and milk spouts.
• Press the
icon (B8). “CAPPUCCINO” is displayed and after a few seconds, frothed milk flows out of the milk spout
into the cup below. (Delivery stops automatically).
• The appliance delivers coffee.
• The cappuccino is now ready. Sweeten to taste and, if desired, sprinkle the froth with a little cocoa powder.
NOTE 1: While making cappuccino, the flow of frothed milk or
coffee can be interrupted by pressing the
icon (B8).
NOTE 2: If the milk in the container finishes while delivering
frothed milk, remove the container and add milk.
Reattach and press the
icon (B8) to request a cappuccino
again.
NOTE 3: To ensure the complete cleanliness and hygiene of the
milk frother, always clean the circuits in the milk container lid
after making cappuccino. “PRESS CLEAN” flashes on the display.
• Place a recipient under the milk spout (fig. 26).
• Press the CLEAN button on the lid (C3) and hold down for at
least 5 seconds (fig. 26) to start the cleaning function.
The appliance displays the message “CLEANING UNDERWAY” above a progress bar. You should not release the
CLEAN button until the bar is complete indicating that
cleaning is concluded. When the CLEAN button is released,
the function stops. After cleaning, remove the milk container and place in the refrigerator. The milk should not be left
out of the refrigerator for more than 15 minutes.
NOTE 4: To change the quantity of coffee or frothed milk the appliance delivers automatically into the cup, proceed as described
in the section “Changing the quantity of milk and coffee for cappuccino”.
•
MAKING LATTE MACCHIATO
•
•
•
•
Prepare the appliance as described to make cappuccino.
Fill the container with about 100 ml of milk for each LATTE
MACCHIATO to be prepared (fig. 23).
Before attaching the milk container to the nozzle, position
the froth regulator between the words CAPPUCCINO and
CAFFE LATTE printed on the milk container lid.
If the froth is not satisfactory, move the regulator slightly
until you obtain the required froth.
Press the icon (B9) to request a latte macchiato.
After a few seconds, frothed milk flows out of the milk
spout into the cup below. (Delivery stops automatically).
Milk delivery stops and the appliance starts delivering coffee.
CHANGING THE QUANTITY OF COFFEE AND MILK
FOR LATTE MACCHIATO
The appliance is set by default to deliver standard quantities of
coffee or milk.
To change these quantities, proceed as follows:
1. Prepare the appliance as described to make latte macchiato
or caffe latte.
2. Place a glass (or big cup) under the coffee spouts and milk
spout.
3. Press the icon corresponding to the preparation you want to
modify, latte macchiato
(B9) for at least 8 seconds until the appliance displays “MILK FOR MACCHIATO PROGRAM
QUANTITY” .
4. Then release the icon. The appliance starts delivering milk.
5. Once the required quantity of milk has been delivered,
press the icon selected previously. Milk delivery stops and
the quantity is memorised.
6. After a few seconds, the appliance delivers coffee into
the cup and displays “COFFEE FOR MACCHIATO PROGRAM
CHANGING THE QUANTITY OF MILK AND COFFEE
FOR CAPPUCCINO
The appliance is set by default to automatically deliver standard
quantities of coffee or milk.
To change these quantities, proceed as follows:
1. Prepare the appliance as described to make cappuccino.
12
QUANTITY”.
7. Once the required quantity of coffee has been delivered,
press the icon selected previously. Coffee delivery stops and
the quantity is memorised.
Cleaning the water tank
CLEANING
Cleaning the machine
Cleaning the spouts
1. Clean the water tank (A12) regularly (about once a month)
with a damp cloth and a little mild washing up liquid.
2. Remove all traces of washing up liquid.
1. Clean the nozzles periodically using a sponge (fig. 29).
2. Check regularly that the holes in the coffee spout are not
blocked. If necessary, remove coffee deposits with a toothpick (fig. 27).
Do not use solvents or abrasive detergents to clean the coffee
machine. A soft damp cloth will suffice.
NEVER wash any of the components of the coffee machine in the
dishwasher.
The following parts of the machine must be cleaned regularly:
• coffee grounds container (A4),
• drip tray (A14),
• water tank (A12),
• coffee spouts (A13),
• pre-ground coffee funnel (A21),
• inside of the machine, accessible after opening the service
door (A2),
• infuser (A5).
Cleaning the pre-ground coffee funnel
Check regularly (about once a month) that the pre-ground coffee
funnel is not blocked (fig. 21).
Danger! Before performing any cleaning operations,
the machine must be turned off by pressing the main switch
(A23) and unplugged from the mains power supply.
Never immerse the coffee machine in water.
Cleaning the inside of the coffee machine
Cleaning the coffee grounds container
1. Check regularly (about once a week) that the inside of the
appliance is not dirty.
If necessary, remove coffee deposits with a sponge.
2. Remove the residues with a vacuum cleaner (fig. 30).
When “EMPTY GROUNDS CONTAINER” is displayed, the grounds
container must be emptied and cleaned.
To clean:
• open the service door on the front of the appliance (fig. 16),
extract the drip tray (fig. 17) and clean.
• Clean the grounds container thoroughly.
Cleaning the infuser
The infuser must be cleaned at least once a month.
Important! When extracting the drip tray, the grounds
container must always be emptied.
Important! The infuser (A5) must not be removed
when the appliance is on.
Do not use force to remove the infuser.
Cleaning the drip tray
1. Make sure the machine is correctly turned off (see “Turning
off”).
2. Open the service door (fig. 16).
3. Remove the drip tray and grounds container (fig. 17).
4. Press the two yellow release buttons inwards and at the
same time pull the infuser outwards (fig. 31).
Important! If the drip tray is not emptied the water
might overflow.
This could damage the machine.
The drip tray is fitted with a level indicator (red) showing the
level of water it contains (fig. 28).
Before the indicator protrudes from the cup tray, the drip tray
must be emptied and cleaned.
To remove the tray:
1. Open the service door (fig. 16).
2. Remove the drip tray and the grounds container (fig. 17).
3. Empty the drip tray and grounds container (A4) and wash
them.
4. Replace the drip tray complete with grounds container
(A4).
5. Close the service door.
Important! Do not use washing up liquid to clean the
infuser. It would remove the lubricant applied to the inside of
the piston.
5. Soak the infuser in water for about 5 minutes, then rinse.
6. After cleaning, replace the infuser (A5) by sliding it onto the
internal support and pin at the bottom, then push the PUSH
symbol fully in until it clicks into place.
13
EN
spout
milk intake tube
3. Remove the froth regulator by pulling it outwards.
4. Wash all the components thoroughly with hot water and
mild washing-up liquid.
Make sure there are no milk residues left inside the holes
and the groove on the fine end of the froth regulator.
5. Check that the intake tube and spout are not clogged with
milk residues.
6. Replace the froth regulator, milk spout and intake tube.
7. Replace the milk container lid.
Please note: If you encounter difficulty inserting the
infuser, before inserting it you must adapt it to the right dimension by pressing it forcefully from the bottom and top as shown
in the figure.
groove
7. Once inserted, make sure the two yellow release buttons
have snapped out.
froth regulator
hole
hole
MENU SETTINGS
When you access the settings menu by pressing the
icon
(B7) (fig. 15), the following menu items are available: Rinsing,
Set language, Energy saving, Set time, Auto start, Auto off, Set
temperature, Water hardness, Contrast, Buzzer, Statistics, Default values, Descale.
8. Replace the drip tray and grounds container.
9. Close the service door.
Cleaning the milk container
Rinsing
Important! Always clean the tubes inside the milk
container (C) when you prepare milk.
If there is still milk in the container, do not leave it out of the
refrigerator for longer than strictly necessary.
Clean the container each time you prepare milk as described in
Note 3 in the section “Making cappuccino”.
All components are dishwasher safe, placing them in the top
basket of the dishwasher.
1. Turn the lid of the milk container clockwise then remove it.
2. Remove the milk spout and intake tube.
This function enables you to obtain hotter coffee.
Proceed as follows:
• When you turn the appliance on, if you want to make a
small cup of coffee (less than 60 ml), preheat the cup by
rinsing it with hot water.
• If on the other hand more than 2/3 minutes have passed
since the last coffee was made, before requesting another
coffee, you must preheat the infuser by first pressing the
icon (B7) to enter the menu then the
and
icons (B5 and B6) to select the “RINSING” function.
14
Press the
icon (B4). “RINSING PRESS OK” is displayed.
Press the
icon (B4) again.
Deliver the water into the underlying drip tray or alternatively use this water to fill (and then empty) the cup to be
used for the coffee to preheat it.
minutes;
7. Press the
8. Press the
icon (B4) to confirm;
icon (B7) to exit the settings menu.
Auto start
You can set the auto start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Set language
To modify the language of the display, proceed as follows:
1. Press the
icon (B7) to enter the settings menu.
2. Press the
and icons (B5 and B6) until “SET LANGUAGE” is displayed;
3. Press the
icon(B4);
Please note:
To enable this function, the time must be set correctly.
To enable Auto start, proceed as follows:
1. Press the icon (B7) to enter the settings menu.
2. Press the
and
icons (B5 and B6) until “AUTO
START” is displayed;
3. Press the
icon (B4). “ENABLE?” is displayed;
4. Press the
icon (B4). The hours flash on the display;
5. Press the
and
icons (B5 and B6) to choose the
hours;
6. Press the
icon (B4) to confirm. The minutes flash on the
display;
7. Press the
and icons (B5 and B6) to change the
minutes;
8. Press the
icon (B4) to confirm. “ENABLED” appears under “AUTO START”.
9. Press the icon (B7) to exit the menu.
To disable the function:
1. Press the icon (B7) to enter the settings menu.
2. Press the
and
icons (B5 and B6) until “AUTO
START” is displayed;
3. Press the
icon (B4). “DISABLE?” is displayed;
4. Press the icon (B4) to confirm; “DISABLED” is displayed.
5. Press the icon (B7) to exit the menu.
4. Press the
and
icons (B5 and B6) until the required language is displayed;
5. Press the
icon (B4) to confirm;
6. Press the icon (B7) to exit the menu.
Alternatively, hold the icon (B7) down for 10 seconds.
The languages scroll through.
Hold the
icon (B4) down for 5 seconds to confirm.
Energy saving
Use this function to enable or disable Energy saving.
When enabled, the function reduces energy consumption in
compliance with European regulations.
To enable or disable the function, proceed as follows:
1. Press the
icon (B7) to enter the settings menu.
2. Press the
and icons (B5 and B6) until “ENERGY
SAVING” is displayed;
3. Press the
icon (B4). “DISABLE?” is displayed (or “ENABLE?” if the function has already been disabled).
4. Press the
icon (B4) to enable or disable the function or
the
icon (B7) to exit the menu.
Please note: A few seconds may elapse between “ENERGY SAVING ENABLED” mode and delivery of the first drink;
“PREPARATION UNDERWAY” is displayed.
Auto off (Standby)
The appliance is set by default to go off if not used for 30 minutes.
The time can be changed so that the appliance switches off after
15 or 30 minutes, or after 1, 2 or 3 hours.
To re-programme Auto off, proceed as follows:
1. Press the icon (B7) to enter the settings menu.
2. Press the
and icons (B5 and B6) until “AUTO OFF”
is displayed;
3. Press the
icon (B4);
Set time
To adjust the time on the display, proceed as follows:
1. Press the icon (B7) to enter the settings menu.
2. Press the
and icons (B5 and B6) until “SET TIME”
is displayed;
3. Press the
icon (B4). The hours flash on the display;
4. Press the
and icons (B5 and B6) to change the
hours;
5. Press the
icon (B4) to confirm. The minutes flash on the
display;
6. Press the
and icons (B5 and B6) to change the
4. Press the
and icons (B5 and B6) until the required
time (15 or 30 minutes, or 1, 2 or 3 hours) is displayed;
5. Press the icon (B4) to confirm;
15
EN
6. Press the iconn (B7) to exit the menu.
Auto off is programmed.
•
•
Set temperature
To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press the
icon (B7) to enter the settings menu.
2. Press the
and icons (B5 and B6) until “SET TEMPERATURE” is displayed;
3. Press the
icon (B4);
4. Press the
and
icons (B5 and B6) until the required temperature is displayed (l = low, llll =
high);
5. Press the
icon (B4) to confirm;
6. Press the
icon (B7) to exit the menu.
Press the icon (B4) to confirm.
Press the icon (B7) once to exit the function or twice to
exit the menu.
Buzzer
This activates or deactivates the buzzer emitted by the machine
each time an icon is pressed or an accessory is inserted/removed.
N.B.: The buzzer is active by default.
To enable buzzer, proceed as follows:
• Press the
icon (B7) to enter the menu and then the
and
icons (B5 and B6) until “BUZZER” is displayed.
•
Press the
icon (B4). ““ENABLE?”” is displayed.
• Press the icon (B4) to confirm.
• Press the icon (B7) to exit the menu.
To disable the function:
• Press the
icon (B7) to enter the menu and then the
and
icons (B5 and B6) until “BUZZER” is displayed.
• Press the icon (B4). ““DISABLE?”” is displayed.
• Press the icon (B4) to confirm.
• Press the icon (B7) to exit the menu.
Water hardness
The operating period can be extended if required, making descaling less frequent by programming the machine on the basis of
the real lime content in the water used.
Proceed as follows:
• Remove the “Total Hardness Test” strip (attached to page
2) from its packaging then dip it fully in the water for a
few seconds. Remove and wait about 30 seconds (until it
changes colour and forms red squares).
• Turn the appliance on by pressing the ON/stand-by button
(A7).
• Press the
icon (B7) to enter the menu and then the
and icons (B5 and B6) until “WATER HARDNESS”
is displayed.
• Press the
icon (B4);
• Press the
and icons (B5 and B6) until the number coincides with the number of red squares on the test
strip (for example, if there are 3 red squares on the test
strip, select the message “WATER HARDNESS lll” .
• Press the
icon (B4) to confirm.
The coffee machine is now programmed to provide the descale warning when actually necessary.
Statistics
This displays statistics relating to the machine.
To display, proceed as follows:
1. Press the icon (B7) to enter the settings menu.
2. Press the
and icons (B5 and B6) until “STATISTICS” is displayed;
3. Press the icon (B4);
4. By pressing the
and icons (B5 and B6), you can
check:
- how many coffees have been made;
- how many milk drinks have been made;
- how many times the machine has been descaled.
- the total number of litres of water delivered.
5. Press the icon (B7) twice to exit the menu.
Contrast
To increase or reduce the contrast of the display, proceed as follows:
• Press the
icon (B7) to enter the menu and then the
and icons (B5 and B6) until “CONTRAST” is displayed.
• Press the
icon (B4).
• Press the
and
icons (B5 and B6) until the
required level of contrast is displayed: (l = low;
lllll = high)
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the icon (B7) to enter the menu;
2. Press the
and icons (B5 and B6) until “DEFAULT
VALUES” is displayed;
16
8. The appliance is now ready for rinsing through with clean
water. Remove the water tank, empty, rinse under running
water, fill with clean water and replace.
“RINSING PRESS OK” is displayed.
9. Empty the container used to collect the descaler solution
and replace it under the coffee spout.
10. Press the
icon (B4) to start rinsing. Hot water flows
out of the coffee spout and the message “RINSING PLEASE
WAIT” is displayed. Once the rinsing is finished, the message “RINSING FILL TANK” is displayed. Fill the water tank
and press the
icon (B4). Place the container under the
hot water spout.
11. When the water tank is completely empty, the message
“RINSING COMPLETE PRESS OK” is displayed.
12. Press the
icon (B4). The appliance goes off automatically.
3. Press the icon (B4);
4. “CONFIRM?” is displayed;
5. Press the icon (B4) to confirm and exit.
Descaling
Descale the machine when the message “DESCALE” flashes on
the display.
Important!
Descaler contains acids which may irritate the skin and eyes.
It is vital to respect the manufacturer’s safety warnings given on
the descaler pack and the warnings relating to the procedure to
follow in the event of contact with the skin and eyes.
Please note:
Use the descaler recommended by the manufacturer only.
Under no circumstances should you use sulphamic or acetic
based descalers. Their use invalidates the guarantee.
Failure to descale the appliance as described above also invalidates the guarantee.
1. Turn the machine on.
2. Enter the settings menu by pressing the icon (B7). Press
the
and
icons (B5 and B6) until “DESCALE” is
displayed;
3. Press the icon (B4) and “CONFIRM?” is displayed.
4. Before confirming, empty the water tank completely (A12).
Pour the descaler diluted with water (respecting the proportions indicated on the descaler pack) into the water tank
and put the water tank back in the appliance.
Please note: If descaling is interrupted before completion, the process must be begun again from the beginning.
TURNING THE APPLIANCE OFF
Each time the appliance is turned off, it performs an automatic
rinse cycle which cannot be interrupted.
Danger of burns! During rinsing, a little hot water
flows from the coffee spouts.
Avoid contact with splashes of water.
To turn the appliance off, press the ON/stand-by button (A7).
The appliance performs a rinse cycle then goes off.
Please note: If the appliance is not used for an extended period, place the main switch on the back of the appliance
(A23) in the 0 position.
Danger of burns!
Hot water containing acid flows out of the hot water spout and
coffee spout.
Avoid contact with splashes of water.
TECHNICAL DATA
Voltage: 220-240 V~ 50/60 Hz max. 10A
Absorbed power: 1350W
Pressure: 15 bars
Water tank capacity: 1.8 litres
Size: LxHxD: 594x454x412 mm
594x378x412 mm
544x375x412 mm
Weight: 26 kg
5. Place an empty container with a minimum capacity of 1.5
litres under the hot water spout and coffee spout.
6. Confirm with the
icon (B4). The message “ADD DESCALER PRESS OK” is displayed.
7. After confirming by pressing
icon, the message
“DESCALING IN PROGRESS” is displayed. The descale programme starts and the descaler liquid is delivered first
from the coffee spout and then from the hot water spout.
The descale programme automatically performs a series of
rinses and pauses to remove limescale deposits from inside
the machine.
After about 30 minutes, the message “RINSING FILL TANK” is
displayed.
The appliance complies with the following EC directives:
EC Regulation 1275/2008 for standby
This appliance conforms to EC Regulation 1935/2004 on
materials and articles intended to come into contact with food.
17
EN
DISPLAYED MESSAGES
DISPLAYED MESSAGE
POSSIBLE CAUSE
FILL TANK
The water tank is empty or positioned Fill the tank with water and/or insert it correctly,
incorrectly.
pushing it as far as it will go.
GROUND TOO FINELY ADJUST
MILL
(alternating with)
PRESS OK
GROUND TOO FINELY ADJUST
MILL
(alternating with)
PRESS OK
(then)
FILL TANK
EMPTY GROUNDS CONTAINER
The grinding is too fine and the Turn the grinding adjustment dial one click clockwise
coffee is delivered too slowly.
towards “7”.
INSERT GROUNDS CONTAINER
ADD PRE-GROUND COFFEE
DESCALE
(alternating with)
COFFEE STANDARD
SOLUTION
The tank has been removed during Insert the tank and press the
icon (B4).
delivery.
“HOT WATER PRESS OK” is displayed.
Press the icon again.
There is air in the hydraulic circuit.
The appliance is once again ready for use.
The grounds container (A4) is too
full or more than three days have
passed since you last made coffee
(this guarantees correct hygiene of
the machine).
Empty the grounds container and clean, then replace.
Important: when removing the drip tray, the grounds
container MUST be emptied, even if it contains few
grounds.
If this is not done, when you make the next coffees, the
grounds container may fill up more than expected and
clog the machine.
After cleaning, the grounds container Open the service door and insert the grounds container.
has not been replaced.
The “pre-ground coffee” function has Extract the appliance and place pre-ground coffee in
been selected without placing any the funnel.
pre-ground coffee in the funnel.
The funnel (A21) is blocked.
Empty the funnel with the help of a knife as described
in the section “Cleaning the pre-ground coffee funnel”.
The machine must be descaled.
The descaling procedure described in the “Descaling”
section needs to be performed as soon as possible.
LESS COFFEE
Too much coffee has been used.
FILL BEANS CONTAINER
The coffee beans have run out.
INSERT INFUSER ASSEMBLY
The infuser has not been replaced Insert the infuser as described in the section “Cleaning
after cleaning.
the infuser”.
The service door is open
Close the service door.
CLOSE DOOR
Select a milder taste or reduce the quantity of preground coffee, then make the coffee again.
Fill the beans container
GENERAL ALARM
The inside of the appliance is very Clean the inside of the appliance thoroughly, as
dirty.
described in the section “Cleaning and maintenance”.
If the message is still displayed after cleaning, contact
a service centre.
WATER CIRCUIT IS EMPTY
FILL WATER CIRCUIT
alternating with
HOT WATER PRESS OK
The water circuit is empty
Connect the hot water nozzle (A10) and press
icon
(B4) to deliver water from it, until it flows out normally.
18
blem cannot be resolved as described, contact Customer Services.
TROUBLESHOOTING
Below is a list of some of the possible malfunctions. If the proPROBLEM
POSSIBLE CAUSE
SOLUTION
The coffee is not hot.
The cups were not preheated.
Warm the cups by rinsing them with hot water.
The infuser has cooled down because Before making coffee, preheat the infuser by selecting the
2/3 minutes have elapsed since the last RINSING function in the menu.
coffee was made.
The coffee is not
creamy enough.
The set temperature is too low.
Change the set temperature (see section “Changing coffee
temperature”).
The coffee is ground too coarsely.
Turn the grinding adjustment dial one click anticlockwise
towards “1” while the coffee mill is in operation (fig. 14).
Wrong type of coffee
Use a type of coffee for espresso coffee machines.
The coffee is delivered The coffee is ground too finely.
too slowly or a drop at
a time.
Turn the grinding adjustment dial one click clockwise towards
“7” while the coffee mill is in operation (fig. 14).
Continue one click at a time until coffee delivery is
satisfactory.
The effect is only visible after delivering 2 coffees.
The coffee is delivered The coffee is ground too coarsely.
too quickly.
Turn the grinding adjustment dial one click anticlockwise
towards “1” while the coffee mill is in operation (fig. 14).
Avoid turning the grinding adjustment dial excessively
otherwise when you select two cups, the coffee may be
delivered a drop at a time.
The effect is only visible after delivering 2 coffees.
Coffee does not come
out of one of the
spouts
The spouts are blocked.
Clean the spouts with a toothpick (fig. 27).
The coffee does not
come out of the
spouts, but from
around the service
door (A2).
The holes in the spouts are clogged If necessary, remove coffee deposits with a toothpick, sponge
with dry coffee dust.
or stiff bristled kitchen brush (fig. 27-29).
Water comes out of
the spouts instead of
coffee.
The pre-ground coffee may be blocked Clean the funnel (A21) with a wooden or plastic fork, clean the
in the funnel (A21).
inside of the machine.
The milk does not
come out of the milk
spout (C5).
The intake tube is not inserted or is Insert the intake tube (C4) in the rubber washer in the milk
inserted incorrectly.
container lid (fig. 24).
The milk is not well
frothed.
The milk container lid is dirty.
The coffee guide (A3) inside the service Thoroughly clean the coffee guide (A3), particularly near the
door is blocked.
hinges.
Clean the milk container lid as described in the section
“Cleaning the milk container”.
The froth regulator is not positioned Adjust following the instructions in the section “Making
correctly.
cappuccino”.
19
EN
PROBLEM
POSSIBLE CAUSE
SOLUTION
The milk contains
The milk is not cold enough or is not You should ideally use skimmed or semi-skimmed milk at
bubbles or squirts out of semi-skimmed.
refrigerator temperature (about 5°C).
the milk spout.
If the result is not as you wished, try changing brand of
milk.
The froth regulator is incorrectly Move the froth regulator slightly towards the word “CAFFE
adjusted.
LATTE” (see section “Making cappuccino”).
The milk container lid is dirty.
Clean the milk container lid as described in the section
“Cleaning the milk container”.
20
5713222111/09.15
5713234801_00_0417
Brandt France, société par actions simplifiée au capital de 1.000.000€
89/91 boulevard Franklin Roosevelt, 92500 Rueil-Malmaison –
RCS Nanterre 801 250 531
www.de-dietrich.com
Download PDF
Similar pages