HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 99
Filtration Products
Please refer to the Price List to identify if the product
you’re ordering is a ‘Stocked’ or ‘Non-Stocked’ item.
• Stocked Items (STK) are commonly purchased and
cover most application requirements. WaterGroup will
ensure ample stock is available at our facilities to fulfill
orders within 2 business days.
• Special order Items (-) are infrequently ordered but may
be required under certain circumstances. Special Order
Items will be filled within 20 calendar days.
• Possible stock substitute items (*) are stocked items that
may replace a special order item. We have provided a
cross-reference indicating similar ‘Stocked Items’ that
may be substituted at your discretion depending on the
application requirements.
99
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 100
Pentek® Filtration Products
What can I do about iron stains?
To determine the correct method of removal, it is
important to know which type of iron is present.
Soluble Iron - also known as ferrous iron or clearwater iron - is clear in running water but will settle to
the bottom as black or rust-colored particles when it
is allowed to stand. When it contacts air, it may
precipitate and stain. Soluble iron cannot be filtered
out but may be reduced with a cation-exchange water
softener.
Insoluble Iron - also known as ferric iron or visible
iron - is suspended in water and is clearly visible as
“rusty” water. You should be able to see small black
or rust-colored particles in your water as soon as it
comes out of your tap before you’ve allowed it to sit.
Insoluble iron may be reduced with a sediment filter.
If you have a water softener, be sure to place the
sediment filter before the water softener.
What kind of cartridge filter do I need?
You need to determine what specific concerns you
have about your water (lead? chlorine? sodium? poor
taste and odor?). If you’re not sure, then find out the
quality of the water entering your home. If you are on
a community water supply, call your water company
and ask them to send you a water quality report. If
your water comes from a private well, you will need to
have your water tested by a reputable laboratory.
Once you have determined how your water can be
improved, our Customer Service Department can
help you determine what water filtration solution best
fits your needs. Here are some general guidelines:
Sediment
3/4” standard or valve-in-head filter housing with
sediment cartridge
Sediment, Whole House
1” and 1-1/2” Big Blue® Filter Housing with sediment
cartridge
Chlorine, Whole House
1” and 1-1/2” Big Blue® Filter Housing with radial-flow
carbon filter cartridge (RFC Series)
Taste/Odor/Chlorine
1/4”, 3/8” or 1/2” SlimLine™ Filter Housing with carbon
filter cartridge
Point-of-Use
Countertop Drinking Water Filter • Undersink Drinking
Water Filtration System • Faucet Filter
• Shower Filter
100
Hydrotech
My water smells like rotten eggs. Can I get a filter
to improve this problem?
That “rotten egg” smell is actually caused by
harmless bacteria which produce hydrogen sulfide
gas. These bacteria can’t be removed with a cartridge
filter.
I have a well and I want to install a sediment filter.
What filter cartridge can I use?
You will need to use a synthetic sediment filter
cartridge such as a Pentek Filtration P5 and CW-F
cartridge. Pleated cellulose cartridges such as the
Pentek S1 Series cartridges are NOT resistant to the
harmless bacteria that are found in many well water
supplies.
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 101
Standard Filter Housings
• Ideal for a wide range of applications, including residential,
commercial and industrial.
• Available in 10” and 20” sizes to meet your needs.
• Optional pressure-relief/bleed button on inlet side of cap.
• Thick walls for increased strength.
• Leak-proof sealing with top-seated Buna-N O-ring.
• Available with clear and blue sumps.
#20 Blue
#20 Blue MB
#10 Blue MB
Standard filter housings are manufactured of a durable
polypropylene or clear Styrene-Acrylonitrile (SAN). All are
equipped with 3/4” NPT inlet and outlet ports.
Reinforced polypropylene housings have excellent chemical
resistance and are ideal for many residential, commercial
and industrial applications. Clear sumps are manufactured
from a clear, FDA-approved Styrene-Acrylonitrile (SAN) and
offer on-site examination of the cartridge.
Standard filter housings are available in both 10” and 20”
lengths and will accommodate a wide range of 2-1/2” and 27/8” diameter cartridges.
#10 Blue
#10 Clear MB
MB=Mounting Boss Cap
COMPONENT
The 150001, 150002, 150067, 150068, 150072,
150435 and 150436 are Tested and Certified by NSF
International under NSF/ANSI Standard 42 for material
and structural integrity requirements only.
Item #
Description
150067
150068
150071
150072
150435
150436
150069
150070
#10 BLUE Standard, 3/4” In/Out, w/p.r., w/m.b.c.
#10 BLUE Standard, 3/4” In/Out, wo/p.r., w/m.b.c.
#10 CLEAR/BLUE CAP Standard, 3/4” In/Out, w/p.r., w/m.b.c.
#10 CLEAR/BLUE CAP Standard, 3/4” In/Out, wo/p.r., w/m.b.c.
#10 CLEAR/BLACK CAP Standard, 3/4” In/Out, w/p.r., w/m.b.c.
#10 CLEAR/BLACK CAP Standard, 3/4” In/Out, wo/p.r., w/m.b.c.
#20 BLUE Standard, 3/4” In/Out, w/p.r., w/m.b.c.
#20 BLUE Standard, 3/4” In/Out, wo/p.r., w/m.b.c.
Maximum
Dimensions
12-1/4” x 5-1/8”
(311 mm x 130 mm)
Initial ∆P (psi) @
Flow Rate (gpm)
1 psi @ 10 gpm
(0.1 bar @ 3.8 lpm)
12-5/8” x 5-1/4”
(321 mm x 133 mm)
1 psi @ 10 gpm
(0.1 bar @ 3.8 lpm)
22-3/8” x 5-1/8”
(568 mm x 130 mm)
1 psi @ 10 gpm
(0.1 bar @ 3.8 lpm)
Materials of Construction
• Housing ....................Polypropylene (Blue)
Styrene-Acrylonitrile (Clear)
• Cap ............................Reinforced Polypropylene
• Button Assembly ....300-series Stainless Steel, EPDM
and Polypropylene
• O-Ring ....................................Buna-N
• Maximum Temperature ........125°F (51.7°C)
• Maximum Pressure ..............125 psi (8.62 bar)
CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
Hydrotech
101
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 102
Slim Line® Filter Housings
• Slim design reduces space required for installation without
sacrificing capacity.
• FDA Grade
• Optional pressure relief button on inlet side of cap.
• Leak-proof seal with top-seated O-ring.
• Available with clear or opaque sumps.
Slim Line® filter housings are available in either reinforced
polypropylene or clear Styrene-Acrylonitrile (SAN) in 5”, 10”
and 20” lengths. The black or blue reinforced polypropylene
housing caps are available with 1/4”, 3/8” or 1/2” NPT
connections. Four bosses are molded into every cap for
mounting purposes.
#20 Blue
#10 Blue
#10 Clear
Slim Line® filter housings are an excellent choice for low-flow
applications and when space and chemical compatibility are
primary concerns.
Clear Slim Line® Filter Housings offer on-site examination of
flow, performance and cartridge life. They are ideal for a
variety of applications. Manufactured of clear StyreneAcrylonitrile (SAN), the sumps are stress relieved for added
clarity and strength. The blue polypropylene caps can be
ordered with an optional pressure-relief button on the inlet
side to relieve pressure inside the housing when changing
filter cartridges.
Opaque Slim Line® Filter Housings are molded from rugged
reinforced polypropylene, Opaque Slim Line® filter housings
offer outstanding chemical compatibility and are ideal for use
in a variety of low-flow applications. These applications
include under-sink and countertop residential filtration, preand post-reverse osmosis filtration, recreational vehicle
filtration, food service, humidifying systems. They are
equipped with a black, reinforced polypropylene cap and can
be ordered with an optional pressure-relief button on the inlet
side to relieve pressure inside the housing when changing
filter cartridges.
COMPONENT
102
The 158005, 158006, 158114, 158120, 158125,
158126, 158128, 158129, 158131, 158149, 158195,
158204 and 158205 are Tested and Certified by NSF
International to NSF/ANSI Standard 42 for material
and structural integrity requirements only.
Hydrotech
#5 Blue
#5 Clear
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 103
Slim Line® Filter Housings Specifications & Performance Data
Item #
Description
Maximum
Dimensions
Initial ∆P (psi) @
Flow Rate (gpm)
2 psi @ 3 gpm
(0.14 bar @ 11 lpm)
2 psi @ 5 gpm
(0.14 bar @ 19 lpm)
158138
#5 BLUE/BLACK CAP Slim Line™, 1/4” In/Out, wo/p.r.
158133
#5 CLEAR/BLUE CAP Slim Line™, 1/4” In/Out, wo/p.r.
7” x 4-3/8”
(178 mm x 111 mm)
7-3/8” x 4-5/8”
(187 mm x 118 mm)
158002
158003
158110
158111
#5 BLUE/BLACK CAP Slim Line™, 3/8” In/Out, w/p.r.
#5 BLUE/BLACK CAP Slim Line™, 3/8 In/Out, wo/p.r.
#5 CLEAR/BLUE CAP Slim Line™, 3/8” In/Out, w/p.r.
#5 CLEAR/BLUE CAP Slim Line™, 3/8” In/Out, wo/p.r.
7” x 4-3/8”
(178 mm x 111 mm)
7-3/8” x 4-5/8”
(187 mm x 118 mm)
158115
158114
158117
158116
158326
158120
158182
158125
158179
#10 BLUE/BLACK CAP Slim Line™, 1/4” In/Out, w/p.r.
#10 BLUE/BLACK CAP Slim Line™, 1/4” In/Out, wo/p.r.
#10 CLEAR/BLUE CAP Slim Line™, 1/4” In/Out, w/p.r.
#10 CLEAR/BLUE CAP Slim Line™, 1/4” In/Out, wo/p.r.
#10 CLEAR/WHITE CAP Slim Line™, 1/4” In/Out, wo/p.r.
#10 BLACK/BLACK CAP Slim Line™, 1/4” In/Out, wo/p.r.
#10 WHITE/WHITE CAP Slim Line™, 1/4” In/Out, w/p.r.
#10 WHITE/WHITE CAP Slim Line™, 1/4” In/Out, wo/p.r.
#10 WHITE/WHITE COUNTERTOP 1/4"" In/Out
11-3/4” x 4-3/8”
(299 mm x 111 mm)
12-1/8” x 4-5/8”
(308 mm x 118 mm)
158005
158006
158007
158008
158149
158098
#10 BLUE/BLACK CAP Slim Line™, 3/8” In/Out, w/p.r.
#10 BLUE/BLACK CAP Slim Line™, 3/8” In/Out, wo/p.r.
#10 CLEAR/BLUE CAP Slim Line™, 3/8” In/Out, w/p.r.
#10 CLEAR/BLUE CAP Slim Line™, 3/8” In/Out, wo/p.r.
#10 WHITE/WHITE CAP Slim Line™, 3/8” In/Out, w/p.r.
#10 WHITE/WHITE CAP Slim Line™, 3/8” In/Out, wo/p.r.
11-3/4” x 4-3/8”
(299 mm x 111 mm)
12-1/8” x 4-5/8”
(308 mm x 118 mm)
11-3/4” x 4-3/8”
(299 mm x 111 mm)
2 psi @ 5 gpm
(0.14 bar @ 19 lpm)
158195
158196
158214
158215
#10 BLUE/BLACK CAP Slim Line™, 1/2” In/Out, w/p.r.
#10 BLUE/BLACK CAP Slim Line™, 1/2” In/Out, wo/p.r.
#10 CLEAR/BLUE CAP Slim Line™, 1/2” In/Out, w/p.r.
#10 CLEAR/BLUE CAP Slim Line™, 1/2” In/Out, wo/p.r.
11-3/4” x 4-3/8”
(299 mm x 111 mm)
12-1/8” x 4-5/8”
(308 mm x 118 mm)
2 psi @ 5 gpm
(0.14 bar @ 19 lpm)
158129
#20 BLUE/BLACK CAP Slim Line™, 3/8” In/Out, wo/p.r.
21-7/8” x 4-3/8”
(556 mm x 111 mm)
2 psi @ 5 gpm
(0.14 bar @ 19 lpm)
158204
158205
#20 BLUE/BLACK CAP Slim Line™, 1/2” In/Out, w/p.r.
#20 BLUE/BLACK CAP Slim Line™, 1/2” In/Out, wo/p.r.
21-7/8” x 4-3/8”
(556 mm x 111 mm)
2 psi @ 5 gpm
(0.14 bar @ 19 lpm)
2 psi @ 3 gpm
(0.14 bar @ 11 lpm)
11-3/4” x 4-3/8”
(299 mm x 111 mm)
Materials of Construction
• Housing ....................SAN (Clear) or
Polypropylene (Opaque)
• Cap ............................Reinforced Polypropylene
• Button Assembly ....300-series Stainless Steel, EPDM
and Polypropylene
• O-Ring ....................................Buna-N
• Maximum Temperature ........125°F (51.7°C)
• Maximum Pressure ..............125 psi (8.62 bar)
CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
Hydrotech
103
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 104
3G Standard Filter Housings
We took our time-tested industry standard and made it
even better. We started from the ground up, utilizing our
35 years of experience, to create the unique and
innovative Third Generation (3G) design. This patent
pending design features integral brackets, 20” clear
housings, and caps for differential pressure gauges.
The new patent pending 3G housing accepts standard
double open end (DOE) and our Seal-Safe™ O-ring
sealing cartridges (only available on Microguard
Cartridges). The new Seal-Safe™ O-ring design offers
enhanced cartridge sealing for critical cartridge
applications. You can be assured the Third Generation
Standard Filter Housing will set the new standard and
keep you in the lead.
3G Standard Filter Housings are manufactured from a
durable polypropylene or clear Styrene-Acrylonitrile
(SAN). All are equipped with 3/4” NPT inlet and outlet
ports.
Reinforced polypropylene housings have excellent
chemical resistance and are ideal for many residential,
commercial and industrial applications. Clear sumps
are manufactured from a clear, FDA compliant StyreneAcrylonitrile (SAN). They offer on-site examination of
the cartridge and have excellent chemical compatibility
as well.
3G Standard Filter Housings are available in both 10”
and 20” lengths and will accommodate a wide range of
2-1/4” to 3-1/8” diameter cartridges.
• Integral bracket versions available.
• Available in 10” and 20” sumps in clear and opaque.
• Buttress threads and uniform walls for easier cartridge
change and improved strength.
• Accepts proprietary Seal-Safe™ double O-ring sealing
cartridges as well as standard DOE cartridges.
• Cap is available with threaded ports for mounting
differential pressure gauge.
• Choice of with or without pressure-relief/bleed button.
• Leak-proof sealing with top-seated floating Buna-N
O-ring.
*
*Shown with
differential
gauge. Gauges
sold separately.
US Patent No. D 455,194 S and D 456,486 S.
Standard Mounting Boss Caps
Integral Mounting Bracket Caps
- Can be used with MC-1A bracket kit.
- Differential pressure gauges cannot be used with
these housings.
- Optional screw kit for integral bracket, part number
150580 sold separately.
- Differential pressure gauges cannot be used with
these housings.
MB Cap W/PR
MB Cap W/PR
IB Cap W/PR
Integral Bracket Meter Mount Caps
- Optional screw kit for integral bracket sold
separately.
- Cap contains predrilled and tapped holes for
mounting differential pressure gauges.
CAUTION: Housing will not hold pressure without an
installed differential pressure gauge.
104
Hydrotech
MM Cap W/PR
IB Cap W/PR
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 105
3G Standard Filter Housings
150576
Initial ∆P (psi) @
Flow Rate (gpm)
Maximum
Dimensions
Item #
Description
Standard Mounting Boss Caps
150542
3G #10 ST BK/BL ¾” MB w/p.r., Blue Housing
150546
3G #10 ST BK/BL ¾” MB, Blue Housing
150544
3G #20 ST BK/BL ¾” MB w/p.r., Blue Housing
150548
3G #20 ST BK/BL ¾” MB, Blue Housing
150558
3G #10 ST BL/CL ¾” MB w/p.r., Clear Housing
150562
3G #10 ST BL/CL ¾” MB, Clear Housing
150587
3G #10 ST BK/CL ¾” MB w/p.r., Clear Housing
150560
3G #20 ST BL/CL ¾” MB w/p.r., Clear Housing
150564
3G #20 ST BL/CL ¾” MB, Clear Housing
Integral Mounting Bracket Caps
150550
3G #10 ST BK/BL ¾” IB w/p.r., Blue Housing
150554
3G #10 ST BK/BL ¾” IB, Blue Housing
150552
3G #20 ST BK/BL ¾” IB w/p.r., Blue Housing
150556
3G #20 ST BK/BL ¾” IB, Blue Housing
150566
3G #10 ST BL/CL ¾” IB w/p.r., Clear Housing
150570
3G #10 ST BL/CL ¾” IB, Clear Housing
150568
3G #20 ST BL/CL ¾” IB w/p.r., Clear Housing
150572
3G #20 ST BL/CL ¾” IB, Clear Housing
Integral Bracket Meter Mount Caps
150574
3G #10 ST BK/BL ¾” MM w/p.r., Blue Housing
3G #20 ST BK/BL ¾” MM w/p.r., Blue Housing
12-3/4” x 5-3/8”
1 psi @ 10 gpm
(324 mm x 137 mm)
(0.07 bar @ 38 lpm)
23” x 5-3/8”
1 psi @ 10 gpm
(584 mm x 137 mm)
(0.07 bar @ 38 lpm)
12-3/4” x 5-3/8”
1 psi @ 10 gpm
(324 mm x 137 mm)
(0.07 bar @ 38 lpm)
23” x 5-3/8”
1 psi @ 10 gpm
(584 mm x 137 mm)
(0.07 bar @ 38 lpm)
13-1/4” x 5-3/4”
1 psi @ 10 gpm
(337 mm x 146 mm)
(0.07 bar @ 38 lpm)
23-1/2” x 5-3/4”
1 psi @ 10 gpm
(597 mm x 146 mm)
(0.07 bar @ 38 lpm)
13-1/4” x 5-3/4”
1 psi @ 10 gpm
(337 mm x 146 mm)
(0.07 bar @ 38 lpm)
23-1/2” x 5-3/4”
1 psi @ 10 gpm
(597 mm x 146 mm)
(0.07 bar @ 38 lpm)
13-1/4” x 5-3/4”
1 psi @ 10 gpm
(337 mm x 146 mm)
(0.07 bar @ 38 lpm)
23-1/2” x 5-3/4”
1 psi @ 10 gpm
(597 mm x 146 mm)
(0.07 bar @ 38 lpm)
*Height does not include meter. Add 1-3/4” for 143549 gauge and 1/2” for 143550 gauge.
Key
ST = Standard
BK = Black
BL = Blue
CL = Clear
MB = Mounting Bosses for MC-1A bracket
W/PR = With Pressure Release
IB = Integral Bracket
(blank) = Without Pressure Release
MM = Meter Mount for Differential Pressure Gauges
BT = British Threads
Materials of Construction
• Housing .....................Polypropylene (Opaque)
Styrene-Acrylonitrile (Clear)
• Cap ............................Reinforced Polypropylene
• Button Assembly .....300-series Stainless Steel,
polypropylene and EPDM
• O-Ring ....................................Buna-N
• Maximum Temperature ........125°F (51.7°C)
• Maximum Pressure ..............125 psi (8.62 bar)
CAUTION: Filter must be protected against freezing, which can cause cracking of the filter and water leakage.
Hydrotech
105
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 106
3G Slim Line® Standard Filter Housings
• 10-inch housings available with clear or opaque sump
• Buttress threads for additional strength and easier
cartridge changes
• John Guest and NPT threaded connections offered in
1/4-inch, 3/8-inch, and 1/2-inch
• Cap styles include mounting boss, integral bracket,
meter mount and optional pressure relief bleed valve
• Housing accepts our proprietary Seal-Safe™ double
o-ring sealing cartridges as well as DOE (double open
end) cartridges
• Leak-proof sealing with a top-seated floating Buna-N
o-ring
Slim Line® housings are the perfect choice for low-flow
filtration applications. Their slim design and high
chemical compatibility make them ideal for those
challenging applications.
Caps are manufactured from reinforced polypropylene
in black, blue, and white. Standard NPT threaded and
John Guest connections are available with 1/4-inch,
3/8-inch and 1/2-inch connections. Three different style
caps add to the flexibility of these housings.
The mounting boss cap features bosses molded in to
the cap. This allows the housing to be mounted to a
single bracket or a multiple housing bracket.
The integral bracket cap does not require a separate
bracket as the bracket is part of the cap. This feature
saves valuable time during installation.
Take the guesswork out of when to change your
cartridge by using the meter mount cap. These gauges
indicate when the cartridge is dirty and allow you to get
the most out of your cartridges.
U.S. Patent No. D 455,194 S and D 456,486 S
106
Hydrotech
Pressure relief buttons are another option with the Slim
Line® 3G housings. Placed on the inlet side, the
pressure-relief button helps reduce the pressure in the
housing when changing the cartridge.
Housings are available with either clear or opaque
sumps. The clear housings are manufactured of
Styrene-Acrylonitrile (SAN) and are stress relieved
through a special process for added strength and clarity.
Clear housings offer on-site examination of the flow,
cartridge life and performance.
Opaque housings are molded from reinforced
polypropylene and offer outstanding chemical
compatibility.
Typical applications for the 3G Slim Line® housings
include, but are not limited to, undersink residential
filtration, pre- and post reverse osmosis systems,
recreational vehicle filtration, and food service.
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 107
3G Slim Line® Standard Filter Housings
Item #
Description
Maximum Dimensions
Initial ∆P (psi) @ Flow Rate (gpm)
3G Slim Line® Housings (Cap Sump) - 1/4-inch NPT, Mounting Boss Housings
158597 #10 3G Slim Line® Black/Blue 1/4” MB w/o pr
158598 #10 3G Slim Line® Black/Blue 1/4” MB w/pr
12-1/2" x 4-5/8"
158599 #10 3G Slim Line® Blue/Clear 1/4” MB w/o pr
(318 mm x 118 mm)
®
158600 #10 3G Slim Line Blue/Clear 1/4” MB w/pr
158601 #10 3G Slim Line® White/White 1/4” MB w/o pr
3G Slim Line® Housings (Cap Sump) - 1/4-inch John Guest Quick Connect, Mounting Boss Housings
158602 #10 3G Slim Line® Black/Blue 1/4” QC MB w/o pr
158603 #10 3G Slim Line® Black/Blue 1/4” QC MB w/pr
12-1/2" x 4-5/8"
158604 #10 3G Slim Line® Blue/Clear 1/4” QC MB w/o pr
(318 mm x 118 mm)
®
158606 #10 3G Slim Line White/White 1/4” QC MB w/o pr
158607 #10 3G Slim Line® White/White 1/4” QC MB w/pr
3G Slim Line® Housings (Cap Sump) - 1/4-inch NPT, Integral Bracket Housings
158636 #10 3G Slim Line® Black/Blue 1/4” IB w/pr
13-3/8" x 5-3/8"
158637 #10 3G Slim Line® Blue/Clear 1/4” IB w/pr
(340 mm x 137 mm)
®
158638 #10 3G Slim Line White/White 1/4” IB w/pr
3G Slim Line® Housings (Cap Sump) - 1/4-inch John Guest Quick Connect, Integral Bracket Housings
158639 #10 3G Slim Line® Black/Blue 1/4” QC IB w/pr
13-3/8" x 5-3/8"
158640 #10 3G Slim Line® Blue/Clear 1/4” QC IB w/pr
(340
mm x 137 mm)
158641 #10 3G Slim Line® White/White 1/4” QC IB w/pr
®
3G Slim Line Housings (Cap Sump) - 3/8-inch NPT, Mounting Boss Housings
158608 #10 3G Slim Line® Black/Blue 3/8” MB w/o pr
158609 #10 3G Slim Line® Black/Blue 3/8” MB w/pr
11-3/4" x 4-3/4"
158610 #10 3G Slim Line® Blue/Clear 3/8” MB w/o pr
(298 mm x 121 mm)
158611 #10 3G Slim Line® Blue/Clear 3/8” MB w/pr
158613 #10 3G Slim Line® White/White 3/8” MB w/o pr
158612 #10 3G Slim Line® White/White 3/8” MB w/pr
3G Slim Line® Housings (Cap Sump) - 3/8-inch John Guest Quick Connect, Mounting Boss Housings
158614 #10 3G Slim Line® Black/Blue 3/8” QC MB w/o pr
11-3/4" x 4-3/4"
158616 #10 3G Slim Line® Blue/Clear 3/8” QC MB w/o pr
(298 mm x 121 mm)
158619 #10 3G Slim Line® White/White 3/8” QC MB w/o pr
158618 #10 3G Slim Line® White/White 3/8” QC MB w/pr
3G Slim Line® Housings (Cap Sump) - 3/8-inch NPT, Integral Bracket Housings
13-3/8" x 5-1/4"
158642 #10 3G Slim Line® Black/Blue 3/8” IB w/pr
(340 mm x 133 mm)
158643 #10 3G Slim Line® Blue/Clear 3/8” IB w/pr
3G Slim Line® Housings (Cap Sump) - 3/8-inch John Guest Quick Connect, Integral Bracket Housings
158645 #10 3G Slim Line® Black/Blue 3/8” QC IB w/pr
13-3/8" x 5-1/4"
158646 #10 3G Slim Line® Blue/Clear 3/8” QC IB w/pr
(340 mm x 133 mm)
®
158647 #10 3G Slim Line White/White 3/8” QC IB w/pr
3G Slim Line® Housings (Cap Sump) - 1/2-inch NPT, Mounting Boss Housings
158620 #10 3G Slim Line® Black/Blue 1/2” MB w/o pr
11-3/4" x 4-3/4"
158621 #10 3G Slim Line® Black/Blue 1/2” MB w/pr
(298 mm x 121 mm)
158622 #10 3G Slim Line® Blue/Clear 1/2” MB w/o pr
158623 #10 3G Slim Line® Blue/Clear 1/2” MB w/pr
3G Slim Line® Housings (Cap Sump) - 1/2-inch John Guest Quick Connect, Mounting Boss Housings
12-1/2" x 4-5/8"
158625 #10 3G Slim Line® Black/Blue 1/2” QC MB w/pr
(318 mm x 118 mm)
158626 #10 3G Slim Line® Blue/Clear 1/2” QC MB w/o pr
3G Slim Line® Housings (Cap Sump) - 1/2-inch NPT, Integral Bracket Housings
13-3/8" x 5-3/8"
158648 #10 3G Slim Line® Black/Blue 1/2” IB w/pr
(298 mm x 121 mm)
158649 #10 3G Slim Line® Blue/Clear 1/2” IB w/pr
3G Slim Line® Housings (Cap Sump) - 1/2-inch John Guest Quick Connect, Integral Bracket Housings
13-3/8" x 5-3/8"
158650 #10 3G Slim Line® Black/Blue 1/2” QC IB w/pr
(298 mm x 121 mm)
158651 #10 3G Slim Line® Blue/Clear 1/2” QC IB w/pr
3G Slim Line® Housings (Cap Sump) - 1/2-inch NPT or Quick Connect, Integral Bracket Meter Mount Housings
13-3/8" x 5-3/8"
158656 #10 3G Slim Line® Black/Blue 1/2” IB MM1 w/pr
(298 mm x 121 mm)
158657 #10 3G Slim Line® Black/Blue 1/2” QC IB MM1 w/pr
1
2 psi @ 3 gpm
(0.14 bar @ 11 L/min)
2 psi @ 5 gpm
(0.14 bar @ 19 L/min)
2 psi @ 3 gpm
(0.14 bar @ 11 L/min)
2 psi @ 3 gpm
(0.14 bar @ 11 L/min)
2 psi @ 5 gpm
(0.14 bar @ 19 L/min)
2 psi @ 5 gpm
(0.14 bar @ 19 L/min)
2 psi @ 5 gpm
(0.14 bar @ 19 L/min)
2 psi @ 5 gpm
(0.14 bar @ 19 L/min)
2 psi @ 5 gpm
(0.14 bar @ 19 L/min)
2 psi @ 5 gpm
(0.14 bar @ 19 L/min)
2 psi @ 5 gpm
(0.14 bar @ 19 L/min)
2 psi @ 5 gpm
(0.14 bar @ 19 L/min)
2 psi @ 5 gpm
(0.14 bar @ 19 L/min)
Housing is not designed to operate without an installed differential pressure gauge. Gauge must be purchased separately. See Pentek Accessories page.
Hydrotech
107
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 108
Big Blue® Filter Housings
• Large capacity housings suitable for high flow applications.
• Available in 10” and 20” sizes to meet your needs.
• Optional pressure relief/bleed on inlet side of cap.
• Accepts 4-1/2” diameter cartridges.
Big Blue® filter housings offer the versatility to meet all your large-capacity
filtration needs, including high flow and heavy sediment applications. The
extra large housing allows for greater cartridge capacity, reducing the
number of vessels required for high flow rate applications. Sumps are
constructed of durable reinforced polypropylene and are available in 10”
and 20” lengths.
The high flow polypropylene (HFPP) cap is available with 3/4”, 1” or 1-1/2”
NPT inlet and outlet ports. The 1-1/4” internal port allows a greater volume
of liquid to pass through the HFPP cap more rapidly.
Big Blue® housings are compatible with a broad range of chemicals and
are available with or without an optional pressure relief button. They
accept a wide variety of 4-1/2” diameter cartridges in either 10” or 20”
lengths.
COMPONENT
#10 Big Blue®
#20 Big Blue®
The 150233, 150234, 150235, 150236, 150237, 150238,
150239, 150240, 150467 and 150469 are Tested and
Certified by NSF International to NSF/ANSI Standard 42
for material and structural integrity requirements only.
Item #
150469
150470
150237
150238
166219
150239
150240
Description
®
#10BB Big Blue , 3/4” In/Out, w/p.r.
#10BB Big Blue®, 3/4” In/Out, wo/p.r.
#10BB Big Blue®, 1” In/Out, w/p.r.
#10BB Big Blue®, 1” In/Out, wo/p.r.
#10BB Big Clear, 1” In/Out, w/p.r.
#10BB Big Blue®, 1 1/2” In/Out, w/p.r.
#10BB Big Blue®, 1 1/2” In/Out, wo/p.r.
150233
150234
166201
150235
150236
#20BB Big Blue®, 1” In/Out, w/p.r.
#20BB Big Blue®, 1” In/Out, wo/p.r.
#20BB Big Clear, 1 1/2” In/Out, w/p.r.
#20BB Big Blue®, 1 1/2” In/Out, w/p.r.
#20BB Big Blue®, 1 1/2” In/Out, wo/p.r.
Maximum
Dimensions
Initial ∆P (psi) @
Flow Rate (gpm)
13-1/8” x 7-1/4”
(333 mm x 184 mm)
2 psi @ 15 gpm
(0.1 bar @ 57 lpm)
13-1/8” x 7-1/4”
(333 mm x 184 mm)
1 psi @ 15 gpm
(0.1 bar @ 57 lpm)
13- 5/8” x 7-1/4”
(346 mm x 184 mm)
1 psi @ 20 gpm
(0.1 bar @ 76 lpm)
23- 3/8” x 7-1/4”
(594 mm x 184 mm)
1 psi @ 15 gpm
(0.1 bar @ 57 lpm)
23-7/8” x 7- 1/4”
(606 mm x 184 mm)
1 psi @ 20 gpm
(0.1 bar @ 76 lpm)
Materials of Construction
• Housing ......................Polypropylene
• Cap ..............................Polypropylene (HFPP)
• Button Assembly ........300-series Stainless Steel,
EPDM and Polypropylene
• O-Ring ..................................Buna-N
• Maximum Temperature ........100°F (37.7°C)
• Maximum Pressure ..............#10BB - 100 psi (6.9 bar)
#20BB - 90 psi (6.2 bar)
CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
108
Hydrotech
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 109
Valve-In-Head Filter Housings
• Ideal for a wide range of applications, including residential,
commercial and industrial.
• Available in 10” and 20” sizes.
• Optional pressure-relief/bleed button on inlet side of cap.
• Thick walls for increased strength.
• Leak-proof sealing with top-seated Buna-N O-ring.
• Available with clear and blue sumps.
Valve-in-head housings incorporate the same rugged design and
application features as our Standard 3/4” NPT housings.
The internal valve-in-head allows both inlet and outlet ports to be
simultaneously shut-off with a half turn of the handle. This
eliminates the need for external shut-off valves. Radial sealing
O-rings and sealing surfaces are continuously cleaned each time
the valve is used, ensuring leak-proof operation.
Valve-in-head filter housings are available in 10” and 20” lengths,
will accommodate a wide range of 2-3/8” and 2-7/8” diameter
cartridges and are available with either reinforced polypropylene
or clear FDA-compliant Styrene-Acrylonitrile (SAN) sumps.
Valve-in-Head
#10 Blue
Valve-in-Head
#20 Blue
Valve-in-Head
#10 Clear
The 150164 and 150172 are Tested and Certified by
NSF International to NSF/ANSI Standard 42 for
material and structural integrity requirements only.
COMPONENT
Maximum
Dimensions
12 1/2” x 5 1/8”
(318 mm x 130 mm)
Initial ∆P (psi) @
Flow Rate (gpm)
4 psi @ 8 gpm
(0.3 bar @ 30 lpm)
#10 CLEAR Valve-In-Head, 3/4” In/Out, w/p.r.
12 7/8” x 5 1/4”
(327 mm x 133 mm)
4 psi @ 8 gpm
(0.3 bar @ 30 lpm)
#20 BLUE Valve-In-Head, 3/4” In/Out, w/p.r.
22 5/8” x 5 1/8”
(575 mm x 130 mm)
4 psi @ 8 gpm
(0.3 bar @ 30 lpm)
Item #
150164
Description
#10 BLUE Valve-In-Head, 3/4” In/Out, w/p.r.
150437
150166
Materials of Construction
• Housing ....................Polypropylene (Blue)
Styrene-Acrylonitrile (Clear)
• Cap ............................Reinforced Polypropylene
• Button Assembly ....300-series Stainless Steel, EPDM
and Polypropylene
•
•
•
•
Valve Parts ............................Delrin
O-Ring ....................................Buna-N
Maximum Temperature ........125°F (51.7°C)
Maximum Pressure ..............125 psi (8.62 bar)
CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
Hydrotech
109
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 110
High Temperature Filter Housings
• Ideal for a wide range of industrial applications.
• Excellent alternative to stainless and carbon steel vessels.
• Durable glass-reinforced nylon construction.
Constructed of glass-reinforced nylon. High temperature
filter housings are an economical alternative to stainless and
carbon steel housings.
1/2”
Slim Line High
Temperature
#20
3/4”
Standard High
Temperature
#20
These 1/2” and 3/4” NPT housings can withstand
temperatures up to a maximum of 160°F (71.1°C). Excellent
chemical compatibility makes High Temperature housings an
ideal choice for a wide variety of industrial applications
including those involving organic solvents, sea water,
alcohol, petroleum and vegetable oils. They should not be
used with ketones.
A #241 Viton O-ring provides dependable sealing. Both 10”
and 20” lengths are available to accommodate flow rates up
to 20 gpm (76L/min.).
1/2”
Slim Line High
Temperature
#10
3/4”
Standard High
Temperature
#10
Item #
Description
158319
#10 BLACK High Temperature Slim Line® 1/2” In/Out, wo/p.r.
150015
#10 RED High Temperature Standard, 3/4” In/Out, wo/p.r.
150111
#20 RED High Temperature Standard, 3/4” In/Out, wo/p.r.
Maximum
Dimensions
11-3/4” x 4-3/8”
(298 mm x 111 mm)
12-1/8” x 5-1/8”
(308 mm x 130 mm)
22-1/4” x 5-1/8”
(565 mm x 130 mm)
Initial ∆P (psi) @
Flow Rate (gpm)
5 psi @ 8 gpm
(<0.4 bar @ 30 lpm)
<1 psi @ 8 gpm
(0.1 bar @ 30 lpm)
Materials of Construction
•
•
•
•
Housing ......................Glass-Reinforced Nylon
Cap ..............................Glass-Reinforced Nylon
O-Ring ..........................Viton®
Maximum Pressure ....125 psi (8.6 bar)
• Maximum Temperature ..........160°F (High Temp.)
160°F (High Temp.
Slim Line®)
CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
110
Hydrotech
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 111
Bag Vessel Assemblies
• Lightweight, corrosion-resistant, polypropylene construction gives you
strength without weight.
• Available in 1” and 1-1/2” NPT sizes.
• Comes complete with gauge, wrench and 3/8” drain valve.
• Choice of 10” and 20” housings.
• Light enough to be portable.
PBH-420
Pentek’s standard bag vessel assemblies keep your system on stream
longer by reducing bag filter change time.
The single large Acme thread closure ensures quick opening and positive
sealing.
All PBH Series vessels come complete with gauge, wrench and 3/8” drain
valve.
PBH Series bag vessel assemblies are made of lightweight, corrosionresistant, polypropylene to give you all the strength you need without the
weight.
Bag vessel assemblies are economically priced, allowing you to install a
duplex system for totally uninterrupted flow rates.
Bags are available in polypropylene felt, absolute-rated high-efficiency
polypropylene and nylon monofilament mesh - ideal for filtering and
straining applications from 1 to 800 microns.
PBH-410
(shown with bag vessel stand)
Item #150370
PBH & BB Housing Stand
Maximum
Dimensions
Initial ∆P (psi)
@ Flow Rates (gpm)
Maximum
Pressure
PBH-410 (1”)
13-1/8” x 7-1/4”
(333mm x 184mm)
1 psi @ 15 gpm
(0.1 bar @ 56.8 lpm)
100 psi
(6.9 bar)
150338
PBH-410 ( 1 1/2”)
13-5/8” x 7-1/4”
(346 mm x 184 mm)
1 psi @ 20 gpm
(0.1 bar @ 75.7 lpm)
100 psi
(6.9 bar)
150367
PBH-420 (1”)
23-3/8” x 7-1/4”
(594mm x 184mm)
1 psi @ 15 gpm
(0.1 bar @ 56.8 lpm)
90 psi
(6.2 bar)
150337
PBH-420 (1 1/2”)
23-7/8” x 7-1/4”
(606mm x 184mm)
1 psi @ 20 gpm
(0.1 bar @ 75.7 lpm)
90 psi
(6.2 bar)
Item #
Description
150360
• PBH-410 accepts a standard 4” x 8-1/4” (102 mm x 210 mm) bag. Dimensions allow for 1” (25 mm) overlap on basket.
• PBH-420 accepts a standard 4” x 18-1/2” (102 mm x 470 mm) bag. Dimensions allow for 1” (25 mm) overlap on basket.
Materials of Construction
•
•
•
•
•
Housing ..........................
Cap..................................
Gauge ............................
Vent Plug........................
Drain Plug ......................
Polypropylene
Polypropylene
Bismuth Brass (lead free)
Polypropylene
High Density Polypropylene
•
•
•
•
Ball Valve......................................
Basket ..........................................
O-Ring and Gaskets ....................
Maximum Temperature ..............
PVC/Buna-N Seals
Polypropylene
Buna-N
100°F (37.8°C)
NOTE: Many standard bags with rings may be used in these vessels. Refer to Pentek Filtration’s bag filter specifications sheet for 1 to 200
micron quick-install bags.
Hydrotech
111
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 112
ST Series Stainless Steel Filter Housings
• Heavy duty units for smaller filtration systems and point-of-use
applications.
• Brushed 304 Stainless Steel sump with a cast brass/nickel plated head.
• Ideal for high pressure/hot water applications.
• Accepts complete range of standard double open end (DOE) cartridges.
ST Series stainless steel filter housings effectively provide heavy-duty
filtration for smaller filtration systems and point-of-use applications.
Supplying flow rates of up to 20 gpm (76 L/min), at a maximum water
temperature of 300°F (149°C). ST Series are ideal for hot water and highpressure applications not suited for plastic housings. The brushed 304
stainless steel sumps are available with either a pipe plug or pet-cock in
the bottom for draining. Heads are manufactured from nickel-plated castbrass.
ST Series housings are easy to install and maintain. They are compatible
with a complete range of filter cartridges, adding to their versatility.
The Model ST-1 is a single cartridge filter ideal for filtering water at a flow
rate not exceeding 10 U.S. GPM (depending on cartridge selection).
The Model ST-2 is identical to the ST-1, but requires two 9-3/4” (248mm)
cartridges or one 19-1/2” (495mm) cartridge to provide higher capacity for
longer operations of the filter between cartridge change-over.
ST-1
ST-2
ST-3
The Model ST-3 is again identical to the ST-1 and ST-2 with even higher
flow rate and greater dirt holding capacity than the ST-1 or ST-2. Requires
three 9-3/4” (248mm) cartridges or one 29-1/4” (743mm) cartridge.
Item #
Description
15601702
ST-1
15601802
ST-2
15601902
ST-3
No. 9-3/4”
(248 mm)
Cartridges
1
2
3
Filter
Height
in (mm)
12 7/8 (327)
22 3/4 (578)
32 3/8 (822)
Shipping
Weight
lbs (kg)
7 (3.2)
10-1/2 (4.8)
13-1/2 (6.1)
Flow Rate*
GPM (LPM)
10 (38)
15 (57)
20 (76)
Max. Pressure
w/pipe plug
psi (bar)
250 (17.2)
250 (17.2)
250 (17.2)
Max. Pressure
w/pet-cock
psi (bar)
250 (17.2)
250 (17.2)
250 (17.2)
*When used with 20 micron (nominal) cartridge.
• Maximum cartridge diameter 3” (76 mm).
• Will not accept GAC, CC, CGAC, TSGAC, WS, PCF or PCC Series cartridges.
Also Available:
144128 Wall Bracket for ST-1, ST-2 and ST-3 156037 Mounting bracket for ST-1, ST-2 and ST-3
Materials of Construction
• Housing ............................Brushed 304 Stainless Steel
• Head ..................................Brass/Nickel Plated
• Maximum Temperature ....300°F (149°C)
• Pipe Size ....................3/4” NPT
• Sealing Gaskets ..........Buna-N, Cellulose Fiber
WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
NOTE: Not recommended for applications with TDS or chlorides >1000 and/or pH <5.0. Use of this product in these conditions will void the
limited warranty. Consult factory for product modifications for these conditions.
112
Hydrotech
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 113
ST-BC Series Stainless Steel Filter Housings
• Heavy duty units for large scale commercial/industrial
applications.
• Brushed 304 stainless steel construction with a gray-silver epoxy
finish.
• Ideal for high-temperature applications.
• Accepts complete range of standard double open end (DOE)
cartridges.
ST-BC Series stainless steel filter housings offer a variety of
solutions for your large-scale, heavy-duty filtration needs. Simple
to install and maintain, these housings are ideal for schools,
restaurants, farms, institutions and industrial use. Holding from 4 to
20 cartridges, ST-BC Series housings provide flow rates from 28 125 gpm (106-473 L/min).
ST-BC-16
ST-BC-12
Housings are constructed of 304 stainless steel with a gray-silver
epoxy finish. They include drains on both the “clean” and “dirty”
sides of the sump.
ST-BC Series housings are compatible with a complete range of
filter cartridges adding to their versatility.
ST-BC-8
ST-BC-4
ST-BC-20
No.* Cartridges
Dimensions
Filter Height
in (mm)
Shipping Wgt.
lbs (kg)
Flow Rate**
GPM (LPM)
Max. Pressure
psi (bar)
Pipe Size
in (mm)
ST-BC-4
(4) 3” X 9-3/4” or 10”
(76mm x 248mm or 254mm)
19 1/4 (489)
20 (9.1)
28 (106)
125 (8.62) to
300°F (149°C)
2 (50.8)
15602602
ST-BC-8
(8) 3” x 9-3/4” or 10”
(76mm x 248mm or 254mm)
29 (737)
30 (13.6)
56 (212)
125 (8.62) to
300°F (149°C)
2 (50.8)
15602702
ST-BC-12
(12) 3” x 9-3/4” or 10”
(76mm x 248mm or 254mm)
39 3/4 (1010)
40 (18.2)
84 (318)
125 (8.62) to
300°F (149°C)
2 (50.8)
15602802
ST-BC-16
(16) 3” x 9-3/4” or 10”
(76mm x 248mm or 254mm)
49 3/4 (1264)
50 (22.7)
110 (416)
125 (8.62) to
300°F (149°C)
2 (50.8)
15603202
ST-BC-20
(20) 2 1/2” x 9-3/4” or 10”
(64mm x 248mm or 254mm)
49 3/4 (1264)
50 (22.7)
125 (473)
125 (8.62) to
300°F (149°C)
2 (50.8)
Item #
Description
15602502
Note: Will not accept model GAC, CC, CGAC, TSGAC, WS, PCF or PCC series cartridges.
*Number of cartridges refers to the number of 9-3/4” (248 mm) or 10” (254 mm) cartridges which are configured around the housing times the number of
cartridges that may be stacked. Example 4 x 2 means that 9-3/4” (248 mm) cartridges are configured four around and two high.
**Above rated capacity based on sediment removal with a 25 micron filter cartridge and 1 PSIG initial clean pressure drop.
Materials of Construction
• Housing ............................Brushed 304 Stainless Steel
• Finish ................................Epoxy
• Maximum Temperature ....300°F (149°C)
• Maximum Pressure ....125 psi (8.6 bar)
• Pipe Size ....................2” (50.8 mm)
• Sealing Gasket ..........Buna-N
NOTE: Maximum cartridge diameter 3” (76 mm).
WARNING: If pressure exceeds 125 psi (8.62 bar) at any time, a pressure regulator must be used. Do not use water that is microbiologically
unsafe or of unknown quality without adequate disinfection before or after the system.
CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
NOTE: Not recommended for applications with TDS or chlorides >1000 and/or pH <5.0. Use of this product in these conditions will void the
limited warranty. Consult factory for product modifications for these conditions.
Hydrotech
113
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 114
MPST-1 Multi-Purpose Stainless Steel Filter Housing
• Unique design accepts either a 41/2-inch x 20-inch DOE cartridge or a PENTEK Model
420 bag filter (Conversion Kit #243111).
• 304 stainless steel construction with epoxy finish.
• Equipped with several ports for differential pressure gauges.
• Heavy-duty design for numerous commercial and industrial applications.
• Ideal for high temperature or high pressure applications.
The PENTEK MPST-1 Multi-Purpose Stainless Steel Filter Housing is designed to accept
either a 41/2-inch x 20-inch DOE cartridge or a PENTEK 420 style bag filter. The housing
comes standard as a cartridge filter housing but the optional bag filter kit converts it to a
bag filter housing in seconds.
Simple to install, maintain, and convert from cartridge to bag filter and back, this housing
is ideal for schools, restaurants, farms, institutions and numerous industrial applications.
The MPST-1 housing is constructed of 304 stainless steel and powder coated with twopart epoxy with flow rates up to 50 GPM and maximum temperature ratings at 250°F,
making it ideal for hot water and high pressure applications. An adjustable stand is
included which adds to its versatility.
It is supplied with two-inch inlet and outlet ports and a threaded drain port for easy
servicing. It is also equipped with several pressure differential gauge ports to aid in
cartridge or bag filter replacement.
Item #
156237
Maximum
Flow Rate
50 GPM
(189 L/min)
Dimensions
(Height x O.A. Dia*)
29” x 6-3/8”
(737 mm x 162 mm)
Pipe Size
(NPT)
2”
(50.8 mm)
Maximum
Temperature
250°F
(121°C)
MPST-1
Maximum
Pressure
150 psi
(10.34 bar)
Note: Will not accept model GAC 20BB, BBF1-20BB, WS-20BB or CRFC-20BB Cartridges.
*Height does not include stand
Materials of Construction
• Housing......................304 Stainless Steel
• Finish ........................Epoxy
• Sealing Gasket ..........Buna-N
NOTE: Maximum cartridge diameter 43/4-inches (12 mm)
WARNING: If pressure exceeds 150 psi (10.34 bar) at any time, a pressure regulator must be used. Do not use water that is
microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
NOTE: Not recommended for applications with TDS or chlorides >1000 ppm and/or pH <5.0. Use of this product in these conditions will void
the limited warranty. Consult factory for product modifications for these conditions.
114
Hydrotech
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 115
BFS/BBFS Series Basic Filtration Systems
• Multi-housing systems include wall-mounting bracket and hardware.
• Available with low-profile Slim Line® or large capacity Big Blue®
housings.
• All systems are shipped completely pre-assembled.
BFS and BBFS Basic Filtration Systems consist of either two or three
filter housings, which are mounted in series, a wall-mounting bracket
and hardware.
The BFS-201 consist of a series of 3/8” NPT low-profile Slim Line®
housings in series for installations where space is limited. The BBFS
systems consist of a series of large-capacity 1” NPT #20 Big Blue®
housings allowing for greater cartridge capacities and higher flow
rates. All systems are equipped with a pressure relief button to relieve
housing pressure during cartridge changes, and are shipped
completely pre-assembled.
BBFS-222
BBFS-22
All of the housings are manufactured of a durable polypropylene,
have excellent chemical resistance and are ideal for many residential,
commercial and industrial applications.
BFS-201
Maximum
Dimensions
Maximum
Pressure
BBFS-22
15-1/4” x 8-1/2” x 26-1/2”
(388mm x 216mm x 673mm)
90 psi (6.2 bar)
160168
BBFS-222
23-1/4” x 8-1/2” x 26-1/2
(591mm x 216mm x 673mm)
90 psi (6.2 bar)
160196
BFS-201
10-1/2” x 5-1/4” x 14”
(267mm x 133mm x 356mm)
125 psi (8.6 bar)
Item #
Description
160166
Materials of Construction
• Cap ............................Polypropylene
• Housing ....................Polypropylene
• Bracket ......................Powder Coated Carbon Steel
• O-Rings ..................................Buna-N
• Maximum Temperature ........100°F (37.8°C)
NOTE: 20” (508 mm) Big Blue® sumps are interchangeable with 10” (254 mm) Big Blue® sumps.
NOTE: Big Blue® is a registered trademark of Pentek Filtration.
WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
Hydrotech
115
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 116
UMS-4 BB Housing Skid System
• Can be installed in series, parallel or combination of both.
• Manufactured from pultruded fiberglass for strength and
fire resistance.
• Holds 4 Big Blue® filter housings or bag vessel
assemblies.
The pultruded fiberglass is compatible with a wide range of
organic and inorganic substances, but the UMS-4 is not
compatible with all plating solutions. Assembly hardware is
manufactured from 304 stainless steel for greater chemical
resistance.
This system is capable of holding up to four Big Blue® filter
housings or bag vessel assemblies. The housings can be
assembled in series, parallel or a combination of both
series and parallel to accommodate your filtration
requirements.
Item #160210
Dimensions H x W x D: 45-5/8” x 34-3/4” x 18”
(1,159mmx 883mm x 457mm)
The UMS-4 can be installed in the following combinations:
Note: Sumps / Housings sold separately.
SERIES
PARALLEL
COMBINATION - SERIES TO PARALLEL
COMBINATION - PARALLEL TO SERIES
Possible Flow Rates
Parallel arrangement: up
up
Series arrangement: up
up
116
Hydrotech
to
to
to
to
200 gpm (757 lpm) for filter bags
100 gpm (378.5 lpm) for filter cartridges
50 gpm (189 lpm) for filter bags
25 gpm (94.6 lpm) for filter cartridges
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 117
Chemical Compatibility Chart
s
es
inl
Sta
es
- 60
er i
nE
0S
o
30
Vit
ne
ico
Sil
-N
Bu
A
A
A
A
D
-A
--B
D
A
-D
A
B
B
A
-A
A
-A
D
-A
B
A
D
A
D
A
A
B
D
A
-B
B
A
B
C1222
A
D
A
B
D
D
B
A
-B
-B
-D
A
C
C
A
-C
B
B
B
D
-A
A
A
D
lrin
12
22
D
B
A*
A
D
A
A
D
C
A
A
A
A
A
A
A
A
-A
D
D
D
A
B
A
A
A
A
A
D
A
A/D*
A/C*
A
A
D
A
A
A
A
A
A
De
A
D
A
A
A
D
A
-A
A
A
B
GF
A
A
A
A
A
B
A
A
A
A
A
A
B
A
C
A
A
A
C
A
A
A
A
D
C
A
A
B
A
A
A
A*
A
A
A
A
D
-B
A
A
C
lon
Ny
125
50
125 100
125 100*
125
10
125 ANY
72
100
125 ANY*
68
20
125
10
125
-125
2
125
96
68
25
125
-125 100
125
20
125 100
125
-125 100
125
20
68
40
68
30
125
-68
-125 100
125 100
125 100
100 100
125 100
68
10
125 100
125
-125 ANY
100
5
125
-68
25
100
-200 100
125 100
125 100
125
-100 100
N
SA
Acetic Acid
Acetone
Ammonium Compounds
Ammonium Hydroxide
Beer
Benzene
Calcium Compounds
Calcium Hypochlorite
Citric Acid
Cottonseed Oil
Detergents
Ethyl Alcohol
Freon
Fruit Juices
Gasoline
Glucose
Glycerin
Glycol
Hexane
Hydrochloric Acid
Hydrofluoric Acid
Hydrogen Peroxide
Inks
Ketones
Lubricating Oils
Mercury
Methyl Alcohol
Mineral Oil
Naphthalene
Nitric Acid
Olive Oil
Plating Solutions
Sodium Compounds
Sodium Hypochlorite
Sugar & Syrups
Sulfuric Acid
Toluene
Water (hot)
DI Water
Sea Water
Whiskey/Wines
Xylene
D
B
B
D
A
B
A
D
A
A
A
A
D
A
B
A
A
A
D
D
D
-D
A
C
A
A
A
A
D
D
A
-A
A
D
D
-A
C
A
D
na
TF
ne
yle
r op
)**
lyp
°F
Po
e(
tur
*
er a
n*
mp
tio
Te
tra
en
nc
)**
Co
(°F
%
ure
rat
pe
m
Te
Chemical
C
D
A
A
D
D
A
B
D
A
A
A
12-113
TF
A
A
A
A
A
A
C
D
D
A
D
A
A
B
A
B
D
A
A*
A
A
A
C
D
C
A
A
A
D
-B
B
-C
-C
C
C
--B
D
-D
B
B
-B
-----C
---D
-C
D
C
C
A
-D
A
A
--D
C
D
A
A
A
A
A
A
A
A
A
A
-A
C
C
A
B
B/C
D
-B
---
12
II
ONLY
A
A
A
A
A
A
A
A
A
A
D
A
A
C
A
A
A
A
A
A
A
A
A
C
B
A
A
A
A
A
A
A
A
-A
---A
A
A
A
-A
A
A
A
-B
B
A
-A
A
--A
A
A = Negligible Effect
B = Limited
Absorption Attack
C = Extensive
Absorption
and/or Rapid
Permeation
D = Extensive Attack
* Consult Factory for
Specific Compound
** Maximum
TF = Talc Filled
GF - Glass Filled
NOTICE: We cannot
anticipate all conditions
under which this
information and our
products, or the
products of other
manufacturers in
combination with our
products, may be used.
We accept no
responsibility for results
obtained by the
application of this
information or the safety
and suitability of our
products, either alone or
in combination. Users
are advised to make
their own tests to
determine the safety
and suitability of each
product combination for
their own purposes and
applications. Unless
otherwise agreed in
writing, or previously
tested by Pentek
Filtration on specific
applications, we sell the
product without warranty
against chemicals listed
above. Buyers and
users assume all
responsibility for liability
performance or damage.
Hydrotech
117
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 118
Pentek® Filter Housings Pressure Drop
PRESSURE/FLOW
MODEL
1/4” Slim Line™
3/8” Slim Line™
1/2” Slim Line™
3/4” Standard
3/4” V-I-H
Big Blue® HFPP 3/4”
Big Blue® HFPP 1”
Big Blue® HFPP 1-1/2”
NET PRESSURE DROP - psi (bar) @ FLOW RATE - gpm (lpm)
1
3
5
8
10
15
20
25
30
35
40
50
60
70
80
(4)
(11)
(19)
(30)
(38)
(57)
(76)
(95)
(114)
(132)
(151)
(189)
(227)
(265)
(303)
<1
2
4
10
15
(<.1)
(.1)
(.3)
(.7)
(1.0)
<1
<1
2
5
7
(<.1)
(<.1)
(.1)
(.4)
(.5)
<1
<1
2
5
7
(<.1)
(<.1)
(.1)
(.4)
(.5)
<1
<1
<1
<1
1
2
3
(<.1)
(<.1)
(<.1)
(<.1)
(.1)
(.1)
(.2)
<1
1
2
4
7
16
(<.1)
(.1)
(.1)
(.3)
(.5)
(1.1)
<1
<1
<1
<1
1
2
3
(<.1)
(<.1)
(<.1)
(<.1)
(.1)
(.1)
(.2)
<1
<1
<1
<1
1
1
2
3
4
5
7
11
16
(<.1)
(<.1)
(<.1)
(<.1)
(.1)
(.1)
(.1)
(.2)
(.3)
(.4)
(.5)
(.8)
(1.1)
<1
<1
<1
<1
<1
1
1
2
2
3
4
7
10
13
(<.1)
(<.1)
(<.1)
(<.1)
(<.1)
(.1)
(.1)
(.1)
(.1)
(.2)
(.3)
(.5)
(.7)
(.9)
CAUTION: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
NOTE: The pressure drop values listed for flow rates higher than 10 gpm were extrapolated from curves, except in the case of the Big Blue®
housings. All tests were performed on empty housings (no cartridges.)
118
Hydrotech
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 119
Pentek® Mounting Brackets
For Big Blue® Housings
This bracket is made for the 10” and 20” Big Blue® housings only.
150061
144092
WB-SS Kit, Bracket and Screws, Powder-Coated Carbon Steel
WB-SS, Bracket Only, Stainless Steel
Standard Housing Brackets
For Mounting Caps with Bosses
The MC-1 bracket is made for the 3/4” (19mm) housings with bosses only. It is constructed of
zinc-plated steel.
150578
144090
MC-1 Kit, Bracket and Screws, 3/4” CAPS only
MC-1 Bracket Only, 3/4” CAPS only
For 3/4” Housings
The UB-1 bracket is made for the 3/4” (19mm) inlet/outlet housings only. It is constructed of zincplated steel.
151011
UB-1 Kit, Bracket and Screws, 3/4” CAPS only
14401200 UB-1 Bracket Only, 3/4” CAPS only
Slim Line™ Mounting Brackets
For 1/4”, 3/8” and 1/2” Housings
For Slim Line™ Housings with 1/4”, 3/8” and 1/2” inlet/outlet. It is constructed of zinc-plated steel.
The kit includes bracket and screws.
26023
Kit, Bracket and Screws, 1/4”, 3/8” and 1/2” Slim Line™
14402500 Bracket Only, 1/4”, 3/8” and 1/2” Slim Line™
CCF & RO System Brackets
14414202 Slim Line™ Bracket, Two-Housing, CCF & RO
14416902 Slim Line™ Bracket, Three-Housing, CCF & RO
Big Blue® System Bracket
For Big Blue® housings with 3/4”, 1” and 1-1/2” inlet/outlet. 2 or 3 housing brackets available.
Made of powder-coated carbon steel.
144258
144259
Big Blue® Bracket, Two-Housing
Big Blue® Bracket, Three-Housing
150370
Bag Housing Stand
For Big Blue® bag housings and Big Blue® cartridge
housings. Made of SuperFlexon®
Hydrotech
119
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 120
Pentek® Accessories
Cartridge Couplers
155003 Standard coupler
available for standard
double open end (DOE)
cartridges
Material: polypropylene
Sump Extension
157209 Used for all natural
polypropylene
housings
Material:
polypropylene
Big Blue® Coupler
144229 Available for Big Blue®
(4-1/2” diameter) DOE
cartridges
Material: Polypropylene
Cap Plug Kit
144457 For vents or gauges
Includes plug and Oring
O-Rings
Spanner Wrenches
Used to loosen sump when
changing cartridges.
150539 Wrench, Sump, SW-1A,
Slim Line & 3G Housings
150295 Wrench, Sump, SW-2,
Standard 3/4” Housings
150296 Wrench, Sump, SW-3,
#10BB Housings
144368 Wrench, Sump, SW-4,
#20BB Housings
144880 Wrench, Sump, Big Clear
Buna-N FDA Grade
151121 237 for #5 & #10 Slim
Line™ Housings
151120 241 for #10, #12 & #20
Housings
151122 Big Blue® O-Ring
Silicone FDA Grade
158096
237 for #5 & #10 Slim Line™ Housings
151118
241 for #10, #12 and #20 Housings
Viton
157193
158095
151117
012 Kit for Vent Plugs
237 for #5 & #10 Slim Line™ Housings
241 for #10, #12 and #20 Housings
Differential Pressure Gauges
These gauges can be read from both sides. They tell the user when to change the cartridge while the filter is
in operation. They are easily mounted directly to MM (Meter Mount) caps with screws provided. Both are
constructed of glass-filled nylon, Buna-N O-rings, 304 SS spring. 143549 contains a ceramic magnet.
Color Change Differential Pressure Gauge
Green and red color indicate when cartridge should be changed.
Green (clean) 0-7 psid; Red (change) 7-10 psid.
Item # 143550
143550
Needle Differential Pressure Gauge
Needle points to international standard colors to determine when cartridge needs to be
changed. Green (clean) 0-6 psid; Yellow (change) 6-9 psid; Red (dirty) 9-12 psid.
Item # 143549
143549
120
Hydrotech
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 121
Pentek® Sumps & Caps
Item #
Description
Item #
Description
Filter Housing Caps
Filter Housing Sumps
154049
1/4" Black Cap w/o pr for Slim Line® & #5 Blue Housings
153014
#5 Slim Line® Blue Sump
®
154053
1/4" Blue Cap w/o pr for Slim Line & #5 Clear Housings
153056
#5 Slim Line® Clear Sump
154062
1/4" White Cap w/o pr for Slim Line® Housings
153049
#10 Slim Line® White Sump
154108
3/8" Black Cap w/pr for Slim Line® & #5 Blue Housings
153062
#10 Slim Line® Black Sump
®
154006
3/8" Black Cap w/o pr for Slim Line & #5 Blue Housings
153017
#10 Slim Line® Blue Sump
®
154111
3/8" Blue Cap w/pr for Slim Line & #5 Clear Housings
153018
#10 Slim Line® Clear Sump
154010
3/8" Blue Cap w/o pr for Slim Line® & #5 Clear Housings
153093
#10 Slim Line® Black Nylon Sump
®
154171
1/2" Black Cap w/pr for Slim Line & #5 Blue Housings
153063
#10 Std Black Nylon Sump
154083
1/2" Black Cap w/o pr for Slim Line® & #5 Blue Housings
153005
#10 Std Red High Temp Sump
154175
1/2" Blue Cap w/pr for Slim Line® & #5 Clear Housings
153001
#10 Blue Sump
154503
1/2" Black Nylon Cap w/o pr for Slim Line® Black Nylon
153128
#10 Clear Sump
Housing
153013
#20 Blue Sump
154101
3/4" Black Cap w/pr for #10 & #20 Blue Housings
153058
#20 Slim Line® Blue Sump
154001
3/4" Black Cap w/o pr for #10 & #20 Blue Housings
153092
#20 Slim Line® Black Nylon Sump
154102
3/4" Blue Cap w/pr for #10 Clear Housings
153064
#20 Std Black Nylon Sump
154115
3/4" Black Mounting Bracket Cap w/pr for #10 & #20 Blue
153029
#10 Big Blue® Sump
Housings
153114
#10 Big Blue® Sump - White
154017
3/4" Black Mounting Bracket Cap w/o pr for #10 & #20 Blue
153208
#10 Big Clear Sump
Housings
153070
#20 Big Blue® Sump
154116
3/4" Blue Mounting Bracket Cap w/pr for #10 Clear Housings
153166
#20 Big Clear Sump
154018
3/4" Blue Mounting Bracket Cap w/o pr for #10 Clear
153080
#20 Big Blue® Sump - White
Housings
153042
#10 All Natural Std. Sump - No Drain Plug (style 2)
154134
3/4" Black VIH Cap w/pr for #10 & #20 VIH Blue Housings
153101
#10 All Natural Std. Sump w/Drain Plug
154138
3/4" Blue VIH Cap w/pr for #10 Clear VIH housing
153046
#12 All Natural Sump for 222 - No Drain Plug
154061
3/4" Black Nylon Cap w/o pr for #10 & #20 housings
153106
#12 All Natural Sump for 222 - With Drain Plug
154003
3/4" Red High Temperature Cap w/o pr
153040
#20 All Natural Std. Sump - No Drain Plug
154195
3/4" Black HFPP Cap w/pr for Big Blue® Housings
153102
#20 All Natural Std. Sump - With Drain Plug
154166
1" Black HFPP Cap w/pr for Big Blue® Housings
153055
#20 Ext All Natural Sump for 222 - No Drain Plug
154077
1" Black HFPP Cap w/o pr for Big Blue® Housings
153107
#20 Ext All Natural Sump for 222 - With Drain Plug
154291
1" Black Cap for Big Clear Housings
3G Filter Housing Sumps
154167
1-1/2" Black HFPP Cap w/pr for Big Blue® Housings
153202
3G #10 SL Blue Sump
154078
1-1/2" Black HFPP Cap w/o pr for Big Blue® Housings
153203
3G #10 SL Clear Sump
154025
#10, #12, & #20 All Natural Cap, Std., No Plugs
153197
3G #10 ST Blue Sump
154135
#10, #12, & #20 All Natural Cap, Std., w/Two Vent Plugs
153194
3G #10 ST Clear Sump
154351
#10, #12, & #20 All Natural 222 Cap, Std., No Plugs
153200
3G #20 ST Blue Sump
154136
#10, #12, & #20 All Natural 222 Cap, Std., w/Two Vent Plugs
153195
3G #20 ST Clear Sump
154082
Countertop White Cap - 1/4” Inlet/Outlet (for #5 and #10 Units)
3G Filter Housing Caps
154638
3G 3/4" Black Mounting Bracket Cap w/pr
154584
3G 3/4" Black Mounting Bracket Cap w/o pr
154646
3G 3/4" Black Integral Bracket Cap w/pr
154600
3G 3/4" Black Integral Bracket Cap w/o pr
154622
3G 3/4" Black Integral Bracket Cap, Meter Mount w/pr
154639
3G 3/4" Blue Mounting Bracket Cap w/pr
154585
3G 3/4" Blue Mounting Bracket Cap w/o pr
154647
3G 3/4" Blue Integral Bracket Cap w/pr
154788
3G 3/8" Black Mounting Bracket Cap w/pr
154790
3G 3/8" Blue Mounting Bracket Cap w/pr
154737
3G 3/8" Blue Mounting Bracket Cap w/o pr
154804
3G 3/8" Black Integral Bracket Cap w/pr
154806
3G 3/8" Blue Integral Bracket Cap w/pr
Hydrotech
121
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 122
C Series Dual Purpose Powdered-Activated Carbon Cartridges
• Economically priced.
• Provides sediment filtration and bad taste & odor and chlorine taste & odor
reduction.*
• High dirt-holding capacity.
• Available in 4 sizes and two micron ratings.
• Recommended for chlorinated water supplies.
C Series cartridges offer an economical solution for all of your general-purpose water
filtration needs. Constructed of a carbon impregnated cellulose media, these dualpurpose cartridges filter out fine sediment particles and reduce unwanted taste, odor
and chlorine taste and odor from your tap water.* A polyester reinforcement backing
and external netting provide additional strength and dirt-loading capacity.
C1-20
C Series cartridges are available in three different sizes and both the C-1 and C-2 are
nominally rated at 5-microns
These dual-purpose cartridges are well suited for a wide range of residential
applications, and make excellent polishing filters when used in process or closed-loop
streams.
* Based on manufacturer's internal testing.
This C1 is Tested and certified by NSF International under
ANSI/NSF Standard 42 for material requirements only.
C2
C1
COMPONENT
Item #
Description
15500243
C1
15502243
C2
15559743
C1-20
Maximum
Dimensions
Micron Rating
(Nominal)*
Initial ∆P (psi)
@ Flow Rate (gpm)
Chlorine Reduction
@ Flow Rate (gpm)
2-1/2” x 9-3/4”
(64mm x 248mm)
2-1/2” x 4-7/8”
(64mm x 124mm)
2-1/2” x 20”
(64 mm x 508mm)
5
4 psi @ 5 gpm
(0.3 bar @ 18.9 lpm)
2.0 psi @ 2 gpm
(0.1 bar @ 7.6 lpm)
1.0 psi @ 5 gpm
(0.1 bar @ 19 lpm)
>2,500 gallons @ 1 gpm*
(>9,500 liters @ 3.8 lpm)
>1,250 gallons @ 0.5 gpm*
(>4,700 liters @ 1.9 lpm)
>5,000 gallons @ 2 gpm*
(>18,900 liters @ 7.6 lpm)
5
5
Materials of Construction
• Filter Media ........PAC Impregnated Cellulose
• End Caps............Vinyl Plastisol (C1 & C2)
• Netting ................Polyethylene
• Reinforcement Backing ..Cellulose Polyester (C1 & C2)
• Core ..................................Polypropylene
• Temperature Rating ........40°F to 125°F (4.4°C to 52°C)
(C1, C2, C1-20)
WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
NOTE: Some harmless bacteria will attack cellulose media cartridges. If your cartridge seems to disintegrate, or has a musty or moldy odor,
switch to a synthetic media cartridge or consult the manufacturer.
*NOTE: Estimated capacity tested at given flow rate using 2 ppm free available chlorine at continuous flow to 0.5 ppm breakthrough.
NOTE: Increased flow rates may result in less effective chlorine reduction.
*Based on manufacturer’s internal testing.
122
Hydrotech
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 123
FloPlus™ Series Modified Molded Carbon Block Cartridges
• Nominal 0.5-micron rating.
• 99.95% reduction of Cryptosporidium and Giardia cysts.
• Premium dirt-holding capacity.
• Outstanding chlorine taste and odor reduction.
• True depth filtration which offers greatest life of any cyst-capable
carbon cartridge.
FloPlus™ cartridges utilize a revolutionary new technology that
significantly enhances the traditional Fibredyne product, making it
possible to obtain cyst reduction in a cartridge that functions like a
nominal 10-micron cartridge.
FloPlus-20
This product boasts extremely low pressure drops and high flow rates
– comparable to 10-micron (very open) carbon cartridges. Its efficiency
is so high that a 0.5 micron rating is possible, which means that cysts
and very small particles can be removed to create cleaner, safer water.
This product is ideal for applications where pressure drop and low flow
have been chronic problems in the past, as well as whole house water
treatment with the addition of cyst reduction. However, it will address
the needs of any end user looking for a product that offers high flow,
low pressure drop, infrequent cartridge changes and cyst-free water.
FloPlus-20BB
FloPlus-10BB
FloPlus-10
The FPS-10 with the FloPlus 10, FPS-20 with the FloPlus
20, FPS-10BB and the FPS-20BB with the FloPlus 20BB
are Tested and Certified by NSF International to
NSF/ANSI Standard 53 for the reduction of Cysts.
COMPONENT
Item #
Description
45590343
FloPlus-10
45590443
FloPlus-20
40390543
FloPlus-10BB
40390643
FloPlus-20BB
Maximum
Dimensions
Micron Rating
(Nominal)*
Initial ∆P (psi)
@ Flow Rate (gpm)
Chlorine Reduction
@ Flow Rate (gpm)
2-7/8” x 9-3/4”
(73mm x 248mm)
2-7/8” x 20”
(73mm x 508mm)
4-5/8” x 9-3/4”
(118 mm x 248mm)
4-5/8” x 20”
(118mm x 508mm)
0.5
2.0 psi @ 1 gpm
(0.1 bar @ 3.8 lpm)
2.0 psi @ 2 gpm
(0.1 bar @ 7.6 lpm)
4.0 psi @ 2 gpm
(0.3 bar @ 7.6 lpm)
4.0 psi @ 4 gpm
(0.3 bar @ 15.2 lpm)
>10,000 gallons @ 1 gpm
(>37,800 liters @ 3.8 lpm)
>20,000 gallons @ 2 gpm
(>75,700 liters @ 7.6 lpm)
>25,000 gallons @ 2 gpm
(>94,500 liters @ 7.6 lpm)
>50,000 gallons @ 4 gpm
(>189,000 liters @ 15.2 lpm)
0.5
0.5
0.5
Materials of Construction
• Filter Media ........Bonded PAC
• End Caps............Polypropylene
• Netting ................Polyethylene
• Gaskets..........................Santonprene™
• Temperature Rating......40°F to 180°F (4.4°C to 82.2°C)
WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. Certain states require system
registration or certification for health-related reduction claims.
NOTE: A drinking water cartridge may contain carbon fines (very fine black powder). After installation and before using the water, follow the
instructions for flushing the cartridge to remove fines.
NOTE: It is recommended that you run the tap for 20 seconds prior to using the water for drinking or cooking purposes.
Hydrotech
123
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 124
NCP Series Non-Cellulose Carbon-Impregnated Pleated
Cartridges
• Non-cellulose media resists bacterial attack.
• Provides sediment filtration and chlorine taste & odor
reduction.
• Pleated for maximum dirt-loading capacity.
• Nominal 10-micron rating.
NCP Series cartridges are constructed from a carbonimpregnated non-cellulose media. They offer sedimentfiltration, as well as taste, odor and chlorine taste & odor
reduction in one cartridge. Unlike cellulose cartridges,
NCP Series cartridges are resistant to both bacterial
attack allowing them to be used for municipal and nonchlorinated water applications.
NCP-20BB
NCP-20
Pleats provide additional surface area for high dirtloading capacity, while maintaining minimal pressure
drop. This combination of a pleated polyester media and
carbon filtration produces an outstanding filter cartridge
with extended service life.
NCP Series cartridges are excellent polishing filters,
closed loop streams and are ideal for post reverse
osmosis and well water applications.
NCP-10
Item #
Description
15536743
NCP-10
15539843
NCP-BB
15539743
NCP-20
15538243
NCP-20BB
NCP-BB
Maximum
Dimensions
Micron Rating
(Nominal)*
Initial ∆P (psi)
@ Flow Rate (gpm)
Chlorine Reduction
@ Flow Rate (gpm)*
2-1/2” x 9-3/4”
(764mm x 248mm)
4-1/2” x 9-3/4”
(114mm x 248mm)
2-1/2” x 20”
(64mm x 508mm)
4-1/2” x 20”
(114mm x 508mm)
10
2 psi @ 3 gpm
(0.1 bar @ 11 lpm)
2 psi @ 8 gpm
(0.1 bar @ 30 lpm)
2 psi @ 5 gpm
(0.1 bar @ 19 lpm)
1 psi @ 10 gpm
(<0.1 bar @ 38 lpm)
225 gallons @ 1 gpm
(850 liters @ 3.8 lpm)
500 gallons @ 2 gpm
(1,890 liters @ 7.6 lpm)
450 gallons @ 2 gpm
(1,700 liters @ 7.6 lpm)
1,000 gallons @ 4 gpm
(3,780 liters @ 15 lpm)
10
10
10
*Filtration efficiency and chlorine taste and odor reduction efficiency are reduced at higher flow rates. Chlorine taste and odor reduction based on greater than
50% reduction using 2ppm free chlorine feed concentration at 68°F (20°C) at continuous flow.
Materials of Construction
• Filter Media ................Pleated Carbon-Impregnated
Polyester
• End Caps ..................Vinyl Plastisol
• Core............................Polypropylene
• Netting........................Polyethylene
• Temperature Rating ..40°F to 125°F (4.4°C to 52°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system.
124
Hydrotech
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 125
CFB Series Modified Molded Block Cartridges
•
•
•
•
Nominal 10-micron rating.*
Excellent dirt-holding capacity.*
High chlorine taste & odor and bad taste & odor reduction.*
Economic choice for high sediment applications leading to premature plugging.
CFB Series cartridges provide the effective chlorine taste & odor reduction found in
traditional carbon block media while offering excellent sediment reduction
capabilities.*
CFB-30
CFB Series products are a modified molded block created by use of our proprietary
Fibredyne technology. This technology creates a unique filter media by attaching
powdered activated carbon onto a cellulose-free synthetic fiber matrix. The result is
a single cartridge that combines the benefits of both a sediment filter and a carbon
block into a single cartridge. Fibredyne's carbon block technology also offers up to
two times the chlorine taste & odor reduction and dirt-holding capacity of traditional
blocks.* In addition, this technology will not release fines into the effluent stream due
to a unique post-filtration layer that is fused to the carbon/fiber media blend.
CFB Series cartridges are manufactured entirely from FDA-compliant materials,
making them an ideal choice for a wide range of residential, food service, commercial
and industrial applications.
* Based on manufacturer's internal testing.
Tested and Certified by NSF International to NSF/ANSI
Standard 42 for material requirements only.
COMPONENT
CFB-20
CFB-10
Item #
Description
25567143
CFB-10
25567243
CFB-20
25567343
CFB-30
Maximum
Dimensions
Micron Rating
(Nominal)
Initial ∆P (psi) @
Flow Rate (gpm)
Chlorine Taste & Odor
Reduction @ Flow Rate (gpm)
2-7/8” x 9-3/4”
(73mm x 248mm)
2-7/8” x 20”
(73mm x 508mm)
2-7/8” x 30”
(73mm x 762mm)
10
3.0 psi @ 1 gpm
(0.7 bar @ 3.8 Lpm)
3.0 psi @ 2 gpm
(0.7 bar @ 7.6 Lpm)
3.0 psi @ 2 gpm
(0.7 bar @ 11.4 Lpm)
>5,000 gallons @ 1 gpm
(>18,900 L @ 3.8 Lpm)
>10,000 gallons @ 2 gpm
(>37,800 L @ 7.6 Lpm)
>15,000 gallons @ 3 gpm
(>56,700 L @ 11.4 Lpm)
10
10
Materials of Construction
• Filter Media ..............Bonded PAC
• End Caps ..................Polypropylene
• Netting ......................Polyethylene
• Gaskets ........................................Santonprene™
• Temperature Rating ....................40°F to 180°F (4.4°C - 82.2°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. Certain states require system
registration or certification for health-related contaminant reduction claims.
NOTE: Cartridges will contain a very small amount of carbon fines (very fine black powder). After installation, a new cartridge should be
flushed with sufficient water to remove all traces of fines prior to using the water.
NOTE: Micron ratings based on 85% or greater removal of given particle size. Estimated capacity using 2ppm free available chlorine at 0.5
ppm breakthrough.
Hydrotech
125
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 126
CFB-Plus Series Modified Molded Block Cartridges
• Nominal 10-micron rating.
• Premium dirt-holding capacity.*
• Premium chlorine taste & odor and bad taste & odor reduction.*
The CFB-Plus Series cartridges are an enhanced version of our CFB product.
It offers the same benefits with even greater chlorine taste & odor reduction
and the highest sediment reduction found in a carbon cartridge.*
CFB-Plus Series products are modified molded blocks manufactured using
our proprietary Fibredyne technology. This technology creates a unique filter
media by attaching powdered activated carbon onto a cellulose-free synthetic
fiber matrix. The result is a single cartridge that combines the benefits of both
a sediment filter and a carbon block into a single cartridge.
Fibredyne's carbon block technology also offers up to two times the chlorine
taste & odor reduction and dirt-holding capacity of traditional blocks.* In
addition, this technology will not release fines into the effluent stream due to
a unique post-filtration layer that is fused to the carbon/fiber media blend.
CFB-Plus Series cartridges are manufactured entirely from FDA-compliant
materials, making them an ideal choice for a wide range of residential, food
service, commercial and industrial applications.
* Based on manufacturer's internal testing.
Tested and Certified by NSF International to NSF/ANSI
Standard 42 for material requirements only.
COMPONENT
Item #
Description
25567443
CFB-Plus10
25567543
CFB-Plus20
25567643
CFB-Plus30
25567743
CFB-Plus10BB
25567843
CFB-Plus20BB
Maximum
Dimensions
Micron Rating
(Nominal)
Initial ∆P (psi) @
Flow Rate (gpm)
Chlorine Taste & Odor
Reduction @ Flow Rate (gpm)
2-7/8" x 9-3/4"
(73mm x 248mm)
2-7/8" x 20"
(73mm x 508mm)
2-7/8" x 30"
(73mm x 762mm)
4-5/8" x 9-3/4"
(118mm x 248mm)
4-5/8" x 20"
(118mm x 508mm)
5-10
1.6 psi @ 1 gpm
(0.7 bar @ 3.8 Lpm)
1.6 psi @ 2 gpm
(0.7 bar @ 7.6 Lpm)
1.6 psi @ 3 gpm
(0.7 bar @ 11.4 Lpm)
2.5 psi @ 2 gpm
(0.2 bar @ 7.6 Lpm)
2.5 psi @ 4 gpm
(0.2 bar @ 11.4 Lpm)
>10,000 gallons @ 1 gpm
(>37,800 L @ 3.8 Lpm)
>20,000 gallons @ 2 gpm
(>75,700 L @ 7.6 Lpm)
>30,000 gallons @ 3 gpm
(>113,500 L @ 11.4 Lpm)
>25,000 gallons @ 2 gpm
(>94,600 L @ 7.6 Lpm)
>50,000 gallons @ 4 gpm
(>189,000 L @ 15.1 Lpm)
5-10
5-10
5-10
5-10
Materials of Construction
• Filter Media ..............Bonded PAC
• End Caps ..................Polypropylene
• Netting ......................Polyethylene
• Gaskets ........................................Santonprene™
• Temperature Rating ....................40°F to 180°F (4.4°C - 82.2°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. Certain states require system
registration or certification for health-related contaminant reduction claims.
NOTE: Cartridges will contain a very small amount of carbon fines (very fine black powder). After installation, a new cartridge should be
flushed with sufficient water to remove all traces of fines prior to using the water.
NOTE: Micron ratings based on 85% or greater removal of given particle size. Estimated capacity using 2ppm free available chlorine at 0.5
ppm breakthrough.
126
Hydrotech
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 127
CFBC Series Modified Molded Block Cartridges
•
•
•
•
Nominal 0.5-micron rating.*
99.95% reduction of Cryptosporidium and Giardia Cysts.*
Premium dirt-holding capacity.*
High chlorine taste & odor and bad taste and odor reduction.*
CFBC Series cartridges offer the effective chlorine taste and odor reduction found
in traditional carbon block media while providing superior sediment reduction with
resistance to premature plugging. They are highly effective at reducing chlorine
taste & odor, bad taste and odor, as well as some organic chemicals.*
CFBC Series products are modified molded blocks manufactured using our
proprietary Fibredyne technology. This technology creates a unique filter media by
attaching powdered activated carbon onto a cellulose-free synthetic fiber matrix.
The result is a single cartridge that combines the benefits of both a sediment filter
and a carbon block into a single cartridge.
Benefits of this technology include low pressure drop over the entire life of the
cartridge and up to three times the chlorine taste & odor and dirt-holding capacity
of traditional 0.5 micron carbon blocks.* In addition, Fibredyne's technology will not
release fines into the effluent stream due to a unique post- filtration layer that is
fused to the carbon/fiber media blend.
CFBC Series cartridges are manufactured entirely from FDA-compliant materials,
making them an ideal choice for a wide range of residential, food service,
commercial and industrial applications.
* Based on manufacturer's internal testing.
Tested and Certified by NSF International to NSF/ANSI
Standard 42 for material requirements only.
COMPONENT
Item #
Description
25567943
CFBC-10
25568043
CFBC-20
Maximum
Dimensions
Micron Rating
(Nominal)
Initial ∆P (psi) @
Flow Rate (gpm)
Chlorine Taste & Odor
Reduction @ Flow Rate (gpm)
2-7/8” x 9-3/4”
(73mm x 248mm)
2-7/8” x 20”
(73mm x 508mm)
0.5
10.7 psi @ 1 gpm
(0.7 bar @ 3.8 Lpm)
10.7 psi @ 2 gpm
(0.7 bar @ 7.6 Lpm)
>20,000 gallons @ 1 gpm
(>75,700 L @ 3.8 Lpm)
>40,000 gallons @ 2 gpm
(>75,700 L @ 7.6 Lpm)
0.5
Materials of Construction
• Filter Media ..............Bonded PAC
• End Caps ..................Polypropylene
• Netting ......................Polyethylene
• Gaskets ........................................Santonprene™
• Temperature Rating ....................40°F to 180°F (4.4°C - 82.2°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. Certain states require system
registration or certification for health-related contaminant reduction claims.
NOTE: Cartridges will contain a very small amount of carbon fines (very fine black powder). After installation, a new cartridge should be
flushed with sufficient water to remove all traces of fines prior to using the water.
NOTE: Micron ratings based on 85% or greater removal of given particle size. Estimated capacity using 2ppm free available chlorine at 0.5
ppm breakthrough.
Hydrotech
127
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 128
CFB-PB10 Lead Reduction Modified Molded Block Cartridges
•
•
•
•
•
Nominal 0.5-micron rating.*
99.95% reduction of Cryptosporidium and Giardia cysts.*
Lead reduction through 2000 gallons.*
Premium dirt-holding capacity.*
High chlorine taste & odor and bad taste and odor reduction.*
The CFB-PB cartridge offers the benefits of effective chlorine taste & odor, cyst and lead
reduction found in traditional carbon block media while offering premium sediment filtration.*
The CFB-PB product is modified molded block manufactured using our proprietary Fibredyne
technology. This technology creates a unique filter media by attaching powdered activated
carbon and lead adsorbent material onto a cellulose-free synthetic fiber matrix. This results
in higher reduction efficiencies that resist plugging, afford the longest life, and feature the
lowest pressure drop over the effective life of the cartridge of any available 0.5 micron filter
cartridge.*
Fibredyne's carbon block technology also offers up to two times the chlorine taste & odor
reduction and dirt-holding capacity of traditional blocks.* In addition, this technology will not
release fines into the effluent stream due to a unique post-filtration layer that is fused to the
carbon/fiber media blend.
The CFB-PB cartridge is manufactured entirely from FDA-compliant materials, making it an
ideal choice for a wide range of residential, food service, commercial and industrial
applications.
* Based on manufacturer's internal testing.
Tested and Certified by NSF International to NSF/ANSI
Standard 42 for material requirements only.
COMPONENT
Item #
Description
25568143
CFB-PB10
Maximum
Dimensions
Micron Rating
(Nominal)
Initial ∆P (psi) @
Flow Rate (gpm)
Chlorine Taste & Odor
Reduction @ Flow Rate (gpm)
2-7/8" x 9-3/4"
(73mm x 248mm)
0.5
8.1 psi @ 1 gpm
(0.6 bar @ 3.8 Lpm)
>5,000 gallons @ 1 gpm
(>18,900 L @ 3.8 Lpm)
Materials of Construction
• Filter Media ..............Bonded PAC
• End Caps ..................Polypropylene
82.2°C)
• Netting ......................Polyethylene
• Gaskets ........................................Santonprene™
• Temperature Rating ....................40°F to 180°F (4.4°C to
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. Certain states require system
registration or certification for health-related contaminant reduction claims.
NOTE: Cartridges will contain a very small amount of carbon fines (very fine black powder). After installation, a new cartridge should be
flushed with sufficient water to remove all traces of fines prior to using the water.
NOTE: Micron ratings based on 85% or greater removal of given particle size. Estimated capacity using 2ppm free available chlorine at 0.5
ppm breakthrough.
128
Hydrotech
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 129
ELPC Series Electroplating Carbon Cartridges
• Cellulose-free construction.
• Resistant to chemical breakdown in both acidic and alkaline solutions up to 180ºF
(82ºC).
• Will not contribute to plating porosity or brittleness.
• Integrated post-filtration layer to ensure that no carbon fines are bled into the
plating bath.
• End cap gaskets are permanently molded on to the end caps to ease filter
cartridge change-out (gaskets cannot fall off into the filter housing during
installation or removal of filter).
The ELPC Series is a premium line of activated carbon filter cartridges specifically
designed for electroplating solutions. They represent the best technology available
in cartridge filtration for use in a wide range of electroplating applications.
The unique technology used to manufacture this product ensures that there is no
bleeding of carbon fines into the plating bath. In addition, the carbon that is used is
an ultra-clean, highly purified carbon to ensure that sulfur is not leached into the
plating bath.
ELPC Series products have a 10- micron nominal rating with superior dirt-holding
ability.
The fibrous physical structure created by our proprietary Fibredyne technology
produces a unique block with true depth filtration capability which allows for
maximum treatment with minimal pressure drop through the cartridge.
Maximum
Dimensions
Micron Rating
(Nominal)
Initial ∆P (psi) @
Flow Rate (gpm)
ELPC-10
2-7/8” x 9-3/4”
(73mm x 248mm)
10
3.4 psi @ 1 gpm
(0.2 bar @ 3.8 Lpm)
25566943
ELPC-20
2-7/8” x 20”
(73mm x 508mm)
10
3.4 psi @ 2 gpm
(0.2 bar @ 7.6 Lpm)
25567043
ELPC-30
2-7/8” x 30”
(73mm x 762mm)
10
3.4 psi @ 3 gpm
(0.2 bar @ 11.4 Lpm)
Item #
Description
25566843
Materials of Construction
• Filter Media ..............Bonded PAC
• End Caps ..................Polypropylene
• Netting ......................Polyethylene
• Gaskets ........................................Santonprene™
• Temperature Rating ....................40°F to 180°F (4.4°C - 82.2°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. Certain states require system
registration or certification for health-related contaminant reduction claims.
NOTE: Cartridges will contain a very small amount of carbon fines (very fine black powder). After installation, a new cartridge should be
flushed with sufficient water to remove all traces of fines prior to using the water.
NOTE: Micron ratings based on 85% or greater removal of given particle size. Estimated capacity using 2ppm free available chlorine at 0.5
ppm breakthrough.
Hydrotech
129
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 130
CBC Series Carbon Briquette Cartridges
• Nominal 0.5-micron rating.*
• 99.5% reduction of Cryptosporidium, Giardia, Entamoeba and
Toxoplasma cysts.*
• Premium high capacity bad taste & odor and chlorine taste & odor
reduction.*
• Enhanced dirt holding capacity.*
CBC Series cartridges are highly effective at reducing unwanted taste,
odor and chlorine: taste and odor from potable drinking water. The unique
structure of the carbon block enables it to reduce Giardia,
Cryptosporidium, Entamoeba and Toxoplasma cysts and fine sediment
particles down to 0.5 microns.*.
CBC-20BB
CBC Series cartridges are manufactured using a patented process and
made entirely from FDA-approved materials. They are an ideal choice for
a wide range of residential, food service, commercial and industrial
applications. They also make excellent polishing filters or pre-filters in
applications requiring fine filtration and high capacity.
* Based on manufacturer's internal testing.
CBC-20
CBC-BB
COMPONENT
CBC-5
The CBC-10, CBC-20, CBC-BB and CBC-20BB
are Tested and Certified by NSF International
under ANSI/NSF Standard 42 for material
requirements only.
Item #
15516943
Description
CBC-5
Micron Rating
(Nominal)*
0.5
15516243
CBC-10
0.5
15530943
CBC-20
0.5
15517043
CBC-BB
0.5
15531243
CBC-20BB
0.5
Maximum
Dimensions
2-7/8” x 4-7/8”
(73 mm x 124 mm)
2-7/8” x 9-3/4”
(73 mm x 248 mm)
2-7/8” x 20”
(73 mm x 508 mm)
4-5/8” x 9-3/4”
(117 mm x 248 mm)
4-5/8” x 20”
(117 mm x 508 mm)
Initial ∆P (psi)
@ Flow Rate (gpm)*
7.0 psi @ 1 gpm
(0.48 bar @ 3.8 lpm)
3.7 psi @ 1 gpm
(0.26 bar @ 3.8 lpm)
3.0 psi @ 2 gpm
(0.21 bar @ 7.6 lpm)
4.6 psi @ 2 gpm
(0.32 bar @ 7.6 lpm)
8.5 psi @ 4 gpm
(0.59 bar @ 15.1 lpm)
CBC-10
Chlorine Reduction
@ Flow Rate (gpm)*†
>3,000 gallons @ 1 gpm
>11,400 litres @ 3.8 lpm
>20,000 gallons @ 1 gpm
>75,700 litres @ 3.8 lpm
>45,000 gallons @ 2 gpm
>170,300 litres @ 7.6 lpm
>50,000 gallons @ 2 gpm
>189,300 litres @ 7.6 lpm
>150,000 gallons @ 4 gpm
>567,800 litres @ 15.1 lpm
Materials of Construction
• Filter Media .....................Bonded PAC
• End Caps .........................Polypropylene
• Inner/Outer Wraps ..........Polyolefin
• Netting ..............................Polyethylene
• Gaskets.............................Buna-N
• Temperature Rating.........40°F to 180°F (5°C to 83°C)
NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. Certain states require system
registration or certification for health-related contaminant reduction claims.
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system.
NOTE: Cartridges will contain a very small amount of carbon fines (very fine black powder) and a new cartridge after installation should be
flushed with sufficient water to remove al traces of the fines from your water system before using the water. Each time you use your filtered
water tap for drinking or cooking purposes it is recommended that you run (flush) the tap for at least 20 seconds prior to using water.
NOTE: Micron ratings based on 85% or greater removal of given particle size.
NOTE: CBC-Series cartridges are capable of reducing 99.9% of Cryptosporidium and Giardia cysts. Data obtained from actual particle
counts using AC Fine Test Dust and Latex spheres.
* Based on manufacturer’s internal testing.
†Estimated capacity using 2ppm free available chlorine (FAC) at continuous flow with greater that 90% reduction.
US Patent No. 5,976,432 & 5,823,668
130
Hydrotech
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 131
CCBC-10 Coconut Based Carbon Block Cartridges
•
•
•
•
Nominal 1-micron rating.*
Water-washed coconut-carbon formulation.*
Premium high capacity bad taste & odor and chlorine taste & odor reduction.*
Enhanced dirt-holding capacity.*
CCBC-10 cartridges are highly effective at reducing unwanted taste & odor and
chlorine taste & odor from potable drinking water. With a nominal 1-micron rating,
they are equally effective at reducing fine sediment.*
CCBC-10 cartridges are manufactured using a patented process and made from a
water-washed, coconut-carbon formulation. This process and media yields a
cartridge with high chlorine taste & odor reduction capacity.
These cartridges are protected by Endurawrap™, a uniquely formulated polyolefin
bilaminate pre-filter, designed to significantly increase the useful life of the cartridge
by trapping sediment that typically plugs carbon block cartridges.
They are an ideal choice for a wide range of residential, food service, commercial
and industrial applications. They also make excellent polishing filters or pre-filters in
applications requiring fine filtration and high capacity.
CCBC-10
SCBC Series are silver impregnated versions of the standard CCBC to help inhibit
the growth of bacteria.
* Based on manufacturer's internal testing.
This CCBC-10 is Tested and certified by NSF
International to NSF/ANSI Standard 42 for
material requirements only.
COMPONENT
Maximum
Dimensions
Micron Rating
(Nominal)*
Initial ∆P (psi)
@ Flow Rate (gpm)
Chlorine Reduction
@ Flow Rate (gpm)*
CCBC-10
2-7/8” x 9-3/4”
(73mm x 248mm)
1
3.3 psi @ 1 gpm
(0.23 bar @ 3.8 lpm)
>20,000 gallons @ 1 gpm
(18,900 liters @3.8 lpm)
SCBC-10
2-7/8” x 9-3/4”
(73mm x 248mm)
1
3.3 psi @ 1 gpm
(0.23 bar @ 3.8 lpm)
>20,000 gallons @ 1 gpm
(18,900 liters @3.8 lpm)
Item #
Description
15571343
15535043
Materials of Construction
• Filter Media .......................Water-Washed
Coconut Based Carbon
• End Caps ...........................Polypropylene
• Inner/Outer Wraps ............Polyolefin
• Netting ..........................Polyethylene
• Gaskets ........................Buna-N
• Temperature Rating ....40°F to 180°F (5°C to 83°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system.
US Patent No. 5,976,432 & 5,823,668
Hydrotech
131
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 132
CBR2 Series Carbon Briquette Multimedia Cartridges
•
•
•
•
Nominal 0.5-micron rating.*
Lead reduction through 2000 gallons.*
VOC and MTBE reduction.*
99.95% reduction of Cryptosporidium, Giardia,
Entamoeba and Toxoplasma cysts.*
• Premium high capacity chlorine taste & odor
reduction through more than 20,000 gallons.*
• Enhanced dirt holding capacity.*
In addition to lead reduction, the unique structure of
the carbon block enables it to reduce Giardia,
Cryptosporidium, Entamoeba and Toxoplasma cysts
and fine sediment particles down to 0.5 microns.*
The CBR2-10 and CBR2-10R are advanced
multimedia cartridges designed to reduce chlorine
taste & odor, dissolved and particulate lead, cysts,
MTBE and certain volatile organic chemicals
(VOCs).*
The CBR2-10R has a built-in flow restrictor (0.6 gpm)
to allow for maximum contact time.
As with our standard CBC Series carbon block, both
the CBR2-10 and CBR2-10R are more effective at
reducing levels of chlorine taste & odor, MTBE and
(VOCs).*
* Based on manufacturer's internal testing.
CBR2 Series cartridges are manufactured using a
patented process, and combine powdered activated
carbon (PAC) with a specially designed adsorbent
medium for lead and mercury reduction.
These cartridges are protected by Endurawrap™, a
uniquely formulated polyolefin bilaminate prefilter,
designed to significantly increase the useful life of the
cartridge by trapping sediment that typically plugs
carbon block cartridges.
This CBR2-10 and CBR2-10R are Tested and
certified by NSF International under ANSI/NSF
Standard 42 for material requirements only.
CBR2-10R
CBR2-10
COMPONENT
Maximum
Dimensions
Micron Rating
(Nominal)*
Initial ∆P (psi)
@ Flow Rate (gpm)
Chlorine Reduction
@ Flow Rate (gpm)*
CBR2-10
2-7/8” x 9-3/4”
(73mm x 247mm)
0.5
15 psi @ 1.0 gpm
(1.0 bar @ 3.8 lpm)
>20,000 gallons @ 1.0 gpm
(>75,700 liters @ 3.8 lpm)
CBR2-10R
2-7/8” x 9-3/4”
(73mm x 247mm)
0.5
Flow restricted to 0.6 gpm (2.3
lpm) with built-in flow restrictor
>20,000 gallons @ 0.6 gpm
(>75,700 liters @ 2.3 lpm)
Item #
Model
15526843
(use 26118)
15540343
Materials of Construction
• Filter Media ............................Bonded PAC
• End Caps ................................Polypropylene
• Outer Wrap ............................Polyolefin
• Netting........................Polyethylene
• Gaskets ......................Buna-N
• Temperature Rating ..40°F to 165°F (5°C to 74°C)
NOTE: Certain states require system registration or certification for health-related contaminant reduction claims.
NOTE: Chlorine and lead reduction tests conducted by Pentek Filtration at 0.6 gallons per minute with a Pentek Filtration Slim Line™ (SL)
housing.
NOTE: Meets NSF Standard 42 for chlorine I taste & odor reduction*.
CAUTION: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
NOTE: Giardia, Cryptosporidium, Entamoeba and Toxoplasma cyst claim based on actual tests showing greater than 99.95% reduction
using NSF Standard 53 protocol.
US Patent No. 5,976,432 & 5,823,668
132
Hydrotech
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 133
EP Series Carbon Briquette Cartridges
• Nominal 5-micron rating.*
• High dirt-holding capacity maximizes utilization of the carbon block.*
• Highly effective bad taste & odor and chlorine taste & odor reduction.*
EP Series cartridges are versatile and combine the long life of carbon
block filtration with the higher dirt-holding capacity of wound, carbonimpregnated paper cartridges like our C-1.
EP Series cartridges are manufactured using a patented process that
yields a cartridge with a nominal 5-micron filtration rating, high dirt-holding
capacity. A high porosity design helps prevent the cartridge from plugging
before its adsorption capacity is exhausted, maximizing the utilization of
the carbon while maintaining low pressure drop.
EP-20
EP-20BB
These cartridges are protected by Endurawrap™, a uniquely formulated
polyolefin bilaminate pre-filter, designed to significantly increase the useful
life of the cartridge by trapping sediment that typically plugs carbon block
cartridges.
EP Series cartridges are manufactured entirely from FDA-compliant
materials making them an ideal choice for a wide range of residential, food
service, commercial and industrial applications.
* Based on manufacturer's internal testing.
The EP-10, EP-20, EP-BB and EP-20BB are Tested and
Certified by NSF International to NSF/ANSI Standard 42
for material requirements only.
EP-BB
EP-10
EP-5
COMPONENT
Item #
25542403
Description
EP-5
15553143
EP-10
15552943
EP-20
15554843
EP-BB
15558343
EP-20BB
Maximum
Dimensions
2-7/8” x 4-7/8”
(73mm x 124mm)
2-7/8” x 9-3/4”
(73mm x 247mm)
2-7/8” x 20”
(73mm x 508mm)
4-5/8” x 9-3/4”
(117mm x 248mm)
4-5/8” x 20”
(117mm x 508mm)
Micron Rating
(Nominal)*
5
5
5
5
5
Initial ∆P (psi)
@ Flow Rate (gpm)
3.4 psi @ 1 gpm
(0.23 bar @ 3.8 lpm)
3.4 psi @ 1 gpm
(0.23 bar @ 3.8 lpm)
3.4 psi @ 2 gpm
(0.23 bar @ 7.6 lpm)
4.3 psi @ 2 gpm
(0.30 bar @ 7.6 lpm)
5.5 psi @ 5 gpm
(0.38 bar @ 19 lpm)
Chlorine Reduction
@ Flow Rate (gpm)*
>3,000 gallons @ 1 gpm
(11,350 litres @ 3.8 lpm)
>6,000 gallons @ 1 gpm
(22,700 litres @ 3.8 lpm)
>12,000 gallons @ 2 gpm
(45,400 litres @ 7.6 lpm)
>22,000 gallons @ 2 gpm
(83,300 litres @ 7.6 lpm)
>40,000 gallons @ 4 gpm
(151,400 litres @ 15.1 lpm
Materials of Construction
• Filter Media .....................Bonded PAC
• End Caps .........................Polypropylene
• Inner/Outer Wraps ..........Polyolefin
• Netting..........................Polyethylene
• Gaskets ........................Buna-N
• Temperature Rating ....40°F to 180°F (5°C - 82.2°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system.
NOTE: The EP cartridges will contain a very small amount of carbon fines (very fine black powder) and a new cartridge after installation
should be flushed with sufficient water to remove the fines from your water system before using the water.
NOTE: Micron ratings based on 85% or greater removal of given particle size. Data obtained from actual particle counts using AC Fine Test
Dust and Latex spheres.
NOTE: Estimated capacity using 2ppm free available chlorine (FAC) at continuous flow with greater than 90% reduction.
US Patent No. 5,976,432 & 5,823,668
Hydrotech
133
HY Catalog CDN 099-134 Pentek.qxp
5/27/2009
9:48 AM
Page 134
CEP-10E Series Coconut Based Carbon Block Cartridges
• Nominal 5-micron rating.*
• Acid-washed coconut-carbon formulation.
• Bad taste & odor and chlorine taste & odor reduction.*
• Low extractables, minimal pH rise for RO pre- and post-filter applications.*
• Enhanced dirt holding capacity.*
CEP-10E cartridges are manufactured from an acid-washed coconut-carbon based
formulation that minimizes the pH rise and produces better tasting water.
Our patented manufacturing process yields a cartridge with a nominal 5- micron filtration
rating, low extractables and a minimal pH rise ideal for RO pre- and post-filter applications.
A thin-wall, high porosity design helps prevent the cartridge from plugging before its
adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining
low pressure drop.
These cartridges are protected by Endurawrap™, a uniquely formulated polyolefin
bilaminate prefilter, designed to significantly increase the useful life of the cartridge by
trapping sediment that typically plugs carbon block cartridges.
CEP-10E
* Based on manufacturer's internal testing.
Tested and certified by NSF International to NSF/ANSI
Standard 42 for material requirements only.
COMPONENT
Item #
Description
15571443
CEP-10E
Maximum
Dimensions
Micron Rating
(Nominal)
Initial ∆P (psi)
@ Flow Rate (gpm)
Chlorine Reduction
@ Flow Rate (gpm)
2-7/8” x 9-3/4”
(73mm x 247mm)
5
3.0 psi @ 1 gpm
(0.2 bar @ 3.8 lpm)
>5,000 gallons @ 1 gpm
(>18,900 liters @ 3.8 lpm)
Materials of Construction
• Filter Media ........................Acid-Washed
Coconut Based Carbon
• End Caps ............................Polypropylene
• Inner/Outer Wraps..............Polyolefin
• Netting........................Polyethylene
• Gaskets ......................Buna-N
• Temperature Rating ..40°F to 125°F (5°C to 52°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system.
US Patent No. 5,976,432 & 5,823,668
134
Hydrotech
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 135
EPM Series Modified Epsilon Carbon Briquette Cartridges
• Nominal 10-micron rating.*
• Highest carbon block dirt holding capacity for maximum cartridge
life.*
• Bad taste & odor and chlorine taste & odor reduction.*
• Lowest pressure drop.
• Economically priced.
EPM Series cartridges are a modified version of our “EP Series”
cartridge. An economical price makes this cartridge suitable for taste,
odor and chlorine taste & odor reduction, as well as sediment filtration.*
EPM Series cartridges are manufactured using a patented process that
yields a cartridge with a nominal 10-micron filtration rating, high porosity
and greater chlorine removal capacity than competitive 10 micron
carbon blocks. The high porosity design helps prevent the cartridge
from plugging before its adsorption capability is exhausted, maximizing
the utilization of the carbon while maintaining low pressure drop.
They are an ideal choice for a wide range of residential, food service,
commercial and industrial applications. They also make excellent
polishing filters or pre-filters in applications requiring fine filtration and
high capacity.
EPM Series cartridges are manufactured entirely from FDA-compliant EPM-20
materials making them an ideal choice for a wide range of residential,
food service, commercial and industrial applications.
EPM-20BB
EPM-10
EPM-BB
* Based on manufacturer's internal testing.
Tested and certified by NSF International to NSF/ANSI
Standard 42 for material requirements only.
COMPONENT
Item #
Description
Maximum
Dimensions
Micron Rating
(Nominal)*
Initial ∆P (psi)
@ Flow Rate (gpm)
Chlorine Reduction
@ Flow Rate (gpm)*
15563443
EPM-10
2-7/8” x 9-3/4”
10
1.5 psi @ 1 gpm
(0.10 bar @ 3.8 lpm)
>3,000 gallons @ 1 gpm
1.0 psi @ 2 gpm
(0.07 bar @ 7.6 lpm)
>6,000 gallons @ 2 gpm
5.0 psi @ 2 gpm
(0.35 bar @ 7.6 lpm)
>15,000 gallons @ 2 gpm
4.0 psi @ 4 gpm
(0.28 bar @ 15 lpm)
>30,000 gallons @ 4 gpm
(73mm x 247mm)
15563543
EPM-20
2-7/8” x 20”
10
(73mm x 508mm)
15578243
EPM-BB
4-5/8” x 9-3/4”
10
(117mm x 247mm)
15578343
EPM-20BB
4-5/8” x 20”
(117mm x 508mm)
10
(>11,400 liters @ 3.8 lpm)
(>22,700 liters @ 7.6 lpm)
(>56,750 liters @ 7.6 lpm)
(>113,500 liters @ 15 lpm)
Materials of Construction
• Filter Media ............................Bonded PAC
• Netting........................Polyethylene
• End Caps ................................Polypropylene
• Gaskets ......................Buna-N
• Outer Wrap ............................Polyolefin
• Temperature Rating ..40°F to 180°F (5°C to 83°C)
NOTE: Performance capacity depends on system design, flow rate and certain other application conditions.
NOTE: When greater chlorine reduction is needed, use the standard EP series blocks.
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system.
NOTE: EPM-Series cartridges will contain a very small amount of carbon fines (very fine black powder). After installation follow the instructions for flushing the cartridge to remove all traces of the fines before using the water. You should run (flush) the tap at least 20 seconds
prior to using water for drinking or cooking purposes. This is particularly important if the tap has not been used daily.
US Patent No. 5,976,432 & 5,823,668
Hydrotech
135
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 136
Chloramine Reduction Carbon Cartridges
• Utilizes advanced activated carbon technology which results in excellent chloramine
as well as superior chlorine reduction.
• CRFC20BB Radial Flow Cartridge.
• CGAC-10 Granular Activated Carbon Cartridge.
• ChlorPlus Series Carbon Briquette Cartridges.
PENTEK® offers three different product solutions for chloramine reduction.
Chloramine is increasingly becoming more common as an alternative to chlorine for
water treatment.
The CGAC-10 cartridge utilizes traditional granular activated carbon and is used for
basic applications where chloramine must be removed. The construction of this
cartridge allows water to pass evenly over a large bed of carbon while minimizing
channeling or bypass.
The ChlorPlus™ carbon block cartridges will help reduce sediment while providing
greater chloramine performance capacities than granular carbon. They will also significantly reduce the carbon fines found in many granular canisters.
The CRFC20-BB heavy duty radial flow cartridge measures 4-1/2” in diameter and 20”
long which is ideal for higher flow rate and capacity applications. This cartridge incorporates a 70 micron porous polypropylene outer shell and a spun polypropylene- CRFC-20BB
ChlorPlus 20
CGAC-10
wrapped core. The bed of granular activated carbon (GAC) between the outer shell
and core creates a unique radial flow design which effectively removes chloramine, has
a low pressure drop, and helps to reduce fines commonly seen in GAC style cartridges.
All three products utilize advanced activated carbon technology which allows excellent chloramine reduction as well as
superior chlorine reduction. The variety of sizes and capacities offered by PENTEK chloramine reduction cartridges
make them ideal solutions for both point-of-entry (POE) and point-of-use (POU) applications.
Maximum
Dimensions
Micron Rating
(Nominal)*
Initial ∆P (psi)
@ Flow Rate (gpm)
Chlorine Taste & Odor
Reduction @ Flow Rate
Chlorine Reduction
@ Flow Rate (gpm)*
2-7/8” x 9-3/4”
(73mm x 248mm)
2-7/8” x 20”
(73mm x 508mm)
2-7/8” x 9-3/4”
(73mm x 248mm)
1
6 psi @ 1 gpm
(0.41 bar @ 3.8 lpm)
6 psi @ 2 gpm
(0.41 bar @ 7.6 lpm)
20 psi @ 1 gpm
(1.38 bar @ 3.8 lpm)
2.5 psi @ 2.5 gpm
(0.17 bar @ 9.5 lpm)
<1 psi @ 1.5 gpm
(<.07 bar @ 9.5 lpm)
2.5 psi @ 2.5 gpm
(0.17 bar @ 9.5 lpm)
<1 psi @ 1.5 gpm
(<.07 bar @ 9.5 lpm)
>100,000 gallons @ 1 gpm
(>378,500L @ 3.8 lpm)†
>100,000 gallons @ 2 gpm
(>757,000L @ 3.8 lpm)†
>30,000 gallons @ 1 gpm
(>113,500L @ 3.8 lpm)†
>3,000 gallons @ 1 gpm
(>11,400 liters @ 3.8 lpm)
>6,000 gallons @ 2 gpm
(>22,700 liters @ 7.6 lpm)
>15,000 gallons @ 2 gpm
(>56,750 liters @ 7.6 lpm)
>10,000 gallons @ 2 gpm
(>37,900L @ 7.6 lpm)†
>30,000 gallons @ 4 gpm
(>113,500 liters @ 15 lpm)
>200,000 gallons @ 4 gpm
(>757,000L @ 15 lpm)†
>30,000 gallons @ 4 gpm
(>113,500 liters @ 15 lpm)
Item #
Description
25541643
ChlorPlus10
25541743
ChlorPlus20
15566143
CGAC-10
35505643
CRFC-BB
4-1/2” x 9-3/4”
(114mm x 248mm)
20
15596743
CRFC20-BB
4-1/2” x 20”
(114mm x 508mm)
20
Materials of Construction
•
•
•
•
•
•
•
•
•
1
20
ChlorPlus
CGAC-10
CRFC-BB/CRFC20-BB
Filter Media...............................Advanced Bonded PAC..........Advanced Granular Activated ......Advanced Granular Activated
End Caps..........................................Polypropylene ...............................Polystyrene ................................Polypropylene
Inner Wrap/Core..................................Polyolefin .........................................N/A..................................Spun Polypropylene
Outer Wrap/Shells...............................Polyolefin...................................Polystyrene .................................Polyethylene
Expansion Pad.........................................N/A......................................Polypropylene ......................................N/A
Post Filter .................................................N/A .................................Spun Polypropylene.....................Spun Polypropylene
Netting ...............................................Polyethylene.......................................N/A...............................................N/A
Gaskets..................................................Buna-N ..................Buna-N (top) Santoprene (bottom) ...................Buna-N
Temperature Rating .............40°F to 125°F (5°C to 52°C).......40°F to 180°F (5°C to 83°C) .......40°F to 125°F (5°C to 52°C)
WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
NOTE: Some harmless bacteria will attack cellulose media cartridges. If your cartridge seems to disintegrate, or has a musty or moldy odor,
switch to a synthetic media cartridge or consult the manufacturer.
*NOTE: Estimated capacity tested at given flow rate using 2 ppm free available chlorine to 0.5 ppm breakthrough.
NOTE: Increased flow rates may result in less effective chlorine reduction.
136
Hydrotech
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 137
GAC Series Granular Activated Carbon Cartridges
• Effective bad taste & odor and chlorine taste & odor reduction.*
• Designed for maximum adsorption.
• Post-filter to reduce carbon fines.
• Available in a variety of sizes and flow rates.
GAC-20
GAC20BB
GAC Series cartridges effectively reduce unwanted tastes, odor and
chlorine from your drinking water.* They are designed to allow
maximum contact between the water and carbon, ensuring maximum
adsorption.
The construction of the cartridge allows water to enter at one end and
pass through the entire length of the carbon bed before exiting the other
end of the cartridge, while an internal expansion pad minimizes
channeling or bypass. Before the water exits the cartridge, a 20-micron
post-filter helps reduce carbon fines and other suspended particles
from the filtered water. The post-filter is permanently fastened to an
innovative support basket ensuring that it is firmly secured and
eliminating any potential for bypass.
GAC Series cartridges are available in a variety of sizes and flow rates,
and effectively provide good general purpose drinking water filtration.
* Based on manufacturer's internal testing.
GAC-10
GAC-5
GAC-BB
The GAC-10 and GAC-20BB are Tested and Certified by
NSF International to NSF/ANSI Standard 42 for material
requirements only.
COMPONENT
Maximum
Dimensions
∆P psi
Initial∆
@ Flow Rate GPM
Chlorine Reduction
@ Flow Rate GPM*
GAC-5
2-7/8” x 4-7/8”
(73 mm x 124 mm)
3.0 psi @ 0.5 gpm
(0.25 bar @ 1.9 lpm)
250 gallons @ 0.5 gpm
(900 liters @1.9 lpm)
15510943
GAC-10
2-7/8” x 9-3/4”
(73 mm x 248 mm)
7.0 psi @ 1.0 gpm
(0.5 bar @ 3.8 lpm)
5,000 gallons @ 1.0 gpm
(18,900 liters @ 3.8 lpm)
15511143
GAC-20
2-7/8” x 20”
(73 mm x 508 mm)
16 psi @ 2.0 gpm
(1.1 bar @ 7.6 lpm)
10,000 gallons @ 2.0 gpm
(37,800 liters @ 7.6 lpm)
15515343
GAC-BB
4-1/2” x 9-3/4”
(114 mm x 248 mm)
6.0 psi @ 2.0 gpm
(0.4 bar @ 7.6 lpm)
12,500 gallons @ 2.0 gpm
(47,000 liters @ 7.6 lpm)
15524943
GAC-20BB
4-1/2” x 20”
(114 mm x 508 mm)
5.0 psi @ 4.0 gpm
(0.3 bar @ 15 lpm)
25,000 gallons @ 4.0 gpm
(95,000 liters @ 15 lpm)
Item #
Description
15511003
Materials of Construction
•
•
•
•
Filter Media ......................Granular Activated Carbon
End Caps ..........................Polystyrene
Post-Filter ........................Spun Polypropylene
Outer Casing....................Polystyrene
• Expansion Pad ................Polypropylene
• Gasket ..............................Buna-N (top)
Santoprene (bottom)
• Temperature Rating ........40°F to 125°F (4.4°C - 52°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system.
NOTE: A drinking water cartridge may contain carbon fines (very fine black powder). After installation and before using the water, follow the
instructions for flushing the cartridge to remove fines.
NOTE: It is recommended that you flush for 20 seconds prior to using the water for cooking purposes.
NOTE: Chlorine Reduction is estimated capacity using 2 ppm free available chlorine (FAC) at continuous flow with greater than 75%
reduction.
Hydrotech
137
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 138
CC-10 Series Coconut Shell Granular Activated Carbon
Cartridges
• Effective bad taste & odor and chlorine taste & odor reduction.*
• Greater VOC reduction than standard GAC cartridges.*
• Post-filter to reduce carbon fines.
• Available in a variety of sizes and flow rates.
CC Series granular activated carbon cartridges are an excellent choice to reduce unwanted
chlorine taste & odor, and certain VOCs from potable drinking water. CC Series cartridges
also reduce MTBE. They contain coconut shell based activated carbon, which produces
drinking water of exceptional taste and quality and provides better VOC reduction than
standard GAC cartridges.*
The construction of the cartridge allows water to enter at one end and pass through the
entire length of the carbon bed before exiting the other end of the cartridge, while an internal
expansion pad minimizes channeling or bypass. Before the water exits the cartridge, a 20micron post filter helps remove carbon fines and other suspended particles from the filtered
water. The post filter is permanently fastened to an innovative support basket ensuring that
it is firmly secured, eliminating any potential for bypass.
CC Series cartridges effectively provide good general-purpose drinking water filtration.
* Based on manufacturer's internal testing.
This CC-10 and CC-20 are Tested and
Certified by NSF International to NSF/ANSI
Standard 42 for material requirements only.
COMPONENT
Item #
Description
15515543
CC-10
Maximum
Dimensions
Micron Rating
(Nominal)*
Initial ∆P psi
@ Flow Rate GPM
Chlorine Reduction
@ Flow Rate GPM*
2-7/8” x 9-3/4”
(73 mm x 248 mm)
20
4.5 psi @ 1 gpm
(0.3 bar @ 3.8 lpm)
7,500 gallons @ 1.0 gpm
(28.000 liters @ 3.8 lpm)
Materials of Construction
•
•
•
•
Filter Media ....................Granular Activated Carbon
End Caps........................Polystyrene
Core ................................Spun Polypropylene
Outer Casing ................Polystyrene
• Expansion Pad ............Polypropylene
• Gasket ............................Buna-N (top)
Santoprene (bottom)
• Temperature Rating ......40°F to 125°F (4.4°C - 52°C)
NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. Certain states require system
registration or certification for health-related reduction claims.
WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
NOTE: A drinking water cartridge may contain carbon fines (very fine black powder). After installation and before using the water, follow the
instructions for flushing the cartridge to remove fines.
NOTE: It is recommended that you flush for 20 seconds prior to using the water for cooking purposes.
138
Hydrotech
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 139
TSGAC Specialty Granular Activated Carbon/Phosphate
Cartridges
•
•
•
•
Effective bad taste & odor and chlorine taste & odor reduction.*
Phosphate crystals reduce rust stains and scale deposits.*
Designed for maximum adsorption.
Post filter to reduce carbon fines.
TSGAC cartridges contain granular activated carbon to effectively reduce
unwanted taste & odor and chlorine taste & odor, as well as phosphate crystals
to reduce rust stains and scale deposits.*
The construction of the cartridge allows water to enter at one end and pass
through the entire length of the carbon bed before exiting the other end of the
cartridge. An internal expansion pad minimizes channeling or bypass. This
design allows for maximum contact between the water and carbon, ensuring
maximum adsorption.
Before the water exits the cartridge, a 20-micron post filter helps remove carbon
fines and other suspended particles from the filtered water. The post filter is
permanently fastened to an innovative support basket ensuring that it is firmly
secured and eliminating any potential for bypass.
TSGAC cartridges provide superior performance and outstanding protection for
your water lines, fixtures, major appliances and commercial equipment.
* Based on manufacturer's internal testing.
The TSGAC-10 Cartridge is tested and Certified by NSF
International against ANSI/NSF Standard 42 - Conforms
to material requirements.
COMPONENT
Item #
Description
15513143
TSGAC-10
Maximum
Dimensions
Initial ∆P (psi)
@ Flow Rate (gpm)
Chlorine Reduction*
@ Flow Rate (gpm)
2-7/8” x 9-3/4”
(73mm x 248mm)
2.5 psi @ 1.0 gpm
(0.2 bar @ 3.8 lpm)
>2,000 gallons @ 1 gpm
(7,570 liters @ 3.8 lpm)
Materials of Construction
• Filter Media..........Granular Activated Carbon
Hexametaphosphate Crystals
• End Caps ............Polystyrene
• Post-filter ............Spun Polypropylene
• Outer Casing ......Polystyrene
• Expansion Pad ............Polypropylene
• Gasket ..........................Buna-N (top)
Santoprene (bottom)
• Temperature Rating ....40°F to 125°F (4.4°C to 52°C)
WARNING: Do not use with water that is microbiologically unsafe of of unknown quality without adequate disinfection before or after the
system.
NOTE: A drinking water cartridge may contain carbon fines (very fine black powder). After installation and before using the water, flush the
cartridge for 5 minutes to remove fines.
NOTE: It is recommended that you run the tap for 20 seconds prior to using the water for drinking or cooking purposes.
Hydrotech
139
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 140
RFC Series Radial Flow Carbon Cartridges
• Provides effective chlorine taste & odor reduction.*
• BB cartridges are ideal for point-of-entry (POE) and other high
flow rate applications.
• Unique design reduces carbon fines in filtered water.
• Available in a wide variety of sizes.
RFC Series cartridges are constructed with a 70-micron porous
polyethylene outer shell and durable polypropylene end caps.
The 2-3/4” OD cartridges have a polypropylene core and the 41/2” OD cartridges incorporate a spun polypropylene core.
Sandwiched between the outer shell and the core is a bed of
granular activated carbon (GAC).
The unique radial flow design offers the benefits of granular
activated carbon (GAC) filtration, such as low pressure drop,
while at the same time significantly reducing the release of
carbon fines commonly associated with GAC style cartridges.
RFC Series cartridges are available in a wide variety of sizes and
are ideal point-of-entry (POE) and other high flow rate applications.
* Based on manufacturer's internal testing.
The RFC20-BB is Tested and Certified by
NSF International to NSF/ANSI Standard 42
for material requirements only.
RFC20
RFC20-BB
RFC-BB
COMPONENT
Item #
15506543
Description
RFC-20
15514143
RFC-BB
15524743
Maximum
Dimensions
2-3/4” x 20”
Initial ∆P (psi)
@ Flow Rate (gpm)
0.60 psi @ 2 gpm
(70 mm x 508 mm)
(0.04 bar @ 7.6 L/min)
22,700 liters @ 7.6 L/min
4-1/2” x 9-3/4”
0.90 psi @ 2 gpm
> 35,000 gallons @ 2 gpm
(114 mm x 248 mm)
(0.06 bar @ 7.6 L/min)
132,500 liters @ 7.6 L/min
4-1/2” x 20”
0.90 psi @ 4 gpm
> 70,000 gallons @ 4 gpm
(114 mm x 508 mm)
(0.06 bar @ 15.1 L/min)
265,000 liters @ 15.1 L/min
RFC20-BB
Chlorine Taste & Odor Reduction
@ Flow Rate (gpm)*
> 6,000 gallons @ 2 gpm
Materials of Construction
• Filter Media ........Granular Activated Carbon
• Outer Shell .........Polyethylene
• End Caps ............Polypropylene
• Gasket ..............................Buna-N
• Inner Wraps/Core ...........Polypropylene
• Temperature Rating ........40°F to 125°F (4.4°C to 51.7°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system.
NOTE: The granular activated carbon cartridges will contain a very small amount of carbon fines (very fine black powder). After installation,
a new cartridge should be flushed with sufficient water to remove all traces of the fines from your water system before using the water. Each
time you use your filtered water tap for drinking or cooking purposes it is recommended that you run (flush) the tap for at least 20 seconds
prior to using water. This is particularly important if the water tap has not been used daily.
140
Hydrotech
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 141
S1 Series Pleated Cellulose Sediment Cartridges
•
•
•
•
•
Pleated design maximizes dirt-holding capacity.
Designed for general water filtration purposes.
Recommended for chlorinated water supplies.
Economically priced.
Nominal 20-micron rating.
S1 Series cartridges are manufactured from a pleated cellulose media and
are designed for general water filtration purposes.
The media is pleated around a polypropylene core for added strength and
the ends are immersed in a thermo-setting vinyl plastisol. Embedding and
sealing each end of the pleat in this fashion fuses the three components
together forming a unitized end cap and gasket.
An external netted sheath helps retain uniform pleat spacing in high flow
and pulsating flow streams. The overlap seam is sonically welded to reduce
bypass improving filtration efficiency.
S1 Series cartridges are economically priced and highly effective at
reducing sediment particles down to 20-microns in size.
S1-20
S1-20BB
S1
S1-BB
Item #
15500143
Description
S1
Micron Rating
(Nominal)
20
Initial ∆P (psi)
@ Flow Rate (gpm)
2.4 psi @ 10 gpm
(0.17 bar @ 38 lpm)
Dimensions
2-5/8” x 9-3/4”
(67x248 mm)
Surface
Area
586.21 in.2
(1488.97 cm2)
Recommended
Flow Rates
12 GPM
(45 LPM)
15530343
S1-20
20
0.8 psi @ 10 gpm
(0.06 bar @ 38 lpm)
2-5/8” x 20”
(67 x 508 mm)
1119.09 in.2
(2842.49 cm2)
15 GPM
(57 LPM)
15540543
S1-BB
20
1.2 psi @ 10 gpm
(0.08 bar @ 38 lpm)
4-1/2” x 9-3/4”
(114 x 248 mm)
2079.63 in.2
(5282.26 cm2)
20 GPM
(76 LPM)
15530543
S1-20BB
20
1.2 psi @ 10 gpm
(0.08 bar @ 38 lpm)
4-1/2” x 20”
(114 x 508 mm)
4289.86 in.2
(10896.24 cm2)
25 GPM
(95 LPM)
Materials of Construction
• Filter Media ..................Resin Impregnated Cellulose
• End Caps ....................Vinyl Plastisol
• Core ............................Polypropylene
• Netting ......................Polyethylene
• Temperature Rating ..40°F to 145°F (4.4°C to 63°C)
NOTE: S1-BB and S1-20BB are for use in 10” and 20” Big Blue® housings and BBFS systems only.
NOTE: Big Blue® (BB) is a registered trademark of Pentek Filtration.
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system.
Hydrotech
141
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 142
R Series Pleated Polyester Cartridges
• Pleated design maximizes dirt-holding capacity.
• Versatile and reusable, allowing for a variety of uses.
• Durable polyester media is bacteria and chemical resistant.
• Nominal 30-micron rating (R-30) and nominal 50-micron rating (R-50).
R Series cartridges are manufactured from a durable, non-woven and
reusable polyester fabric that is suitable for a wide range of filtration
uses.
The media is pleated around a polypropylene core for added strength,
and the ends are immersed in a thermo-setting vinyl plastisol.
Embedding and sealing each end of the pleat block in this fashion fuses
the three components, together forming a unitized end cap and gasket.
The overlap seam is sonically welded to reduce internal bypass,
improving filtration efficiency.
The standard 9-3/4” length cartridge has more than four square feet of
polyester fabric, while the larger Big Blue® version has more than 16
square feet. The media is pleated to maximize dirt-holding capacity and
extend the time period between changes or cleaning.
R Series cartridges are resistant to both bacteria and chemical attack
making them suitable for a variety of residential, commercial and
industrial applications.
This R50-BB is Tested and certified by NSF
International to NSF/ANSI Standard 42 for
material requirements only.
COMPONENT
Item #
Description
15503153
R30-478
15501743
R30
15503843
R50
15541643
R30-20
15510143
R30-BB
15505343
R50-BB
15543043
R30-20BB
Maximum
Dimensions
Micron Rating
(Nominal)*
Initial ∆P (psi)
@ Flow Rate (gpm)
2-5/8” x 4-7/8”
(67mm x 124mm)
2-5/8” x 9-3/4”
(67mm x 248mm)
2-5/8” x 9-3/4”
(67mm x 248mm)
2-5/8” x 20”
(67mm x 508mm)
4-1/2” x 9-3/4”
(114mm x 248mm)
4-1/2” x 9-3/4”
(114mm x 248mm)
4-1/2” x 20”
(114mm x 508mm)
30
<1 psi @ 10 gpm
(<0.1 bar @ 38 lpm)
<1 psi @ 10 gpm
(<0.1 bar @ 38 lpm)
<1 psi @ 10 gpm
(<0.1 bar @ 38 lpm)
<1 psi @ 10 gpm
(<0.1 bar @ 38 lpm)
<1 psi @ 10 gpm
(<0.1 bar @ 38 lpm)
<1 psi @ 10 gpm
(<0.1 bar @ 38 lpm)
<1 psi @ 20 gpm
(<0.1 bar @ 76 lpm)
30
50
30
30
50
30
*Based on manufacturer’s internal testing.
Materials of Construction
• Filter Media ............................Non-Woven Polyester
• End Caps ................................Vinyl Plastisol
• Core............................Polypropylene
• Temperature Rating ..40°F to 125°F (4.4°C to 52°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system.
142
Hydrotech
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 143
PP Series Pleated Polypropylene Cartridges
•
•
•
•
Pleated design maximizes dirt-holding capacity.
Durable polypropylene media resists bacterial attack.
Suitable for municipal or well water applications.
Nominal 30-micron rating.
PP Series cartridges are manufactured from a durable polypropylene
media. They are resistant to bacterial attack and compatible with a
wide range of chemicals.
The high porosity of the media provides higher flow rates and dirt
holding capacity, while maintaining extremely low pressure drop.
The media is pleated around a polypropylene core for added strength,
and the ends are immersed in a thermo-setting vinyl plastisol.
Embedding and sealing each end of the pleat block in this fashion
fuses the three components together forming a unitized end cap and
gasket.
An external netted sheath helps protect against particle migration in
pulsating flow streams. The overlap seam is sonically welded to
reduce internal bypass, improving filtration efficiency.
PP Series cartridges provide nominal 30-micron filtration and are
highly effective at reducing medium/fine particles in a variety of
residential, commercial and industrial applications.
Item #
Model
15512043
PP30-BB
Maximum
Dimensions
Micron Rating
(Nominal)
Initial ∆P (psi)
@ Flow Rate (gpm)
4 1/2” x 9 3/4”
(114mm x 248mm)
30
<1 psi @ 10 gpm
(<0.1 bar @ 38 lpm)
Materials of Construction
• Filter Media........................Non-Woven Polypropylene • Netting........................Polyethylene (PP30 only)
• End Caps ..........................Vinyl Plastisol
• Temperature Rating ..40°F to 145°F (4.4°C to 63°C)
• Core....................................Polypropylene
WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
Hydrotech
143
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 144
ECP Series Pleated Cellulose Polyester Cartridges
•
•
•
•
Replaces CP and HFCP Series cartridges.
Special formulation of resin-impregnated cellulose and polyester fibers. ECP1-20
Provides higher wet strength than regular cellulose cartridges.
Minimal unloading and media migration.
ECP Series cartridges are manufactured from a special formulation of resinimpregnated cellulose and polyester fibers.
This unique blend of materials provides a higher wet strength than regular
cellulose cartridges. It also provides high flow rates and dirtholding capacity,
while maintaining extremely low pressure drop.
The media is pleated around a polypropylene core for added strength and
the ends are immersed in a thermo-setting vinyl plastisol. Embedding and
sealing each end of the pleat block in this fashion fuses the components
together forming a unified end cap and gasket.
ECP Series cartridge end caps feature a color-coding system for easy identification of micron ratings: Tan (1-micron), White (5-micron), Blue (20micron), Yellow (50-micron).
The new ECP cartridges contain more media surface area than most
competitive cartridges. The standard 10" ECP cartridges contain six square
feet of media, where most cartridges contain only 4.5 square feet. Additional
ECP cartridges contain the following amount of media:
• Standard 20" cartridge – 12 ft2
• 10" BB cartridge – 18 ft2
• 20" BB cartridge – 36 ft2
ECP20-20BB
ECP50-BB
ECP5-10
Item #
Model
End Cap
Color
Maximum
Dimensions
Micron Rating
(Nominal)
Initial ∆P (psi)
@ Flow Rate (gpm)
25548143
25548243
25548343
25548443
25548543
25548643
25548743
25548843
25548943
25549043
25549143
25549243
25549343
25549443
25549543
25549643
ECP1-10
ECP5-10
ECP20-10
ECP50-10
ECP1-20
ECP5-20
ECP20-20
ECP50-20
ECP1-BB
ECP5-BB
ECP20-BB
ECP50-BB
ECP1-20BB
ECP5-20BB
ECP20-20BB
ECP50-20BB
Tan
White
Blue
Yellow
Tan
White
Blue
Yellow
Tan
White
Blue
Yellow
Tan
White
Blue
Yellow
2-5/8" x 9-3/4" (67mm x 248mm)
2-5/8" x 9-3/4" (67mm x 248mm)
2-5/8" x 9-3/4" (67mm x 248mm)
2-5/8" x 9-3/4" (67mm x 248mm)
2-5/8" x 20" (67mm x 508mm)
2-5/8" x 20" (67mm x 508mm)
2-5/8" x 20" (67mm x 508mm)
2-5/8" x 20" (67mm x 508mm)
4-1/2" x 9-3/4" (114mm x 248mm)
4-1/2" x 9-3/4" (114mm x 248mm)
4-1/2" x 9-3/4" (114mm x 248mm)
4-1/2" x 9-3/4" (114mm x 248mm)
4-1/2" x 20" (114mm x 508mm)
4-1/2" x 20" (114mm x 508mm)
4-1/2" x 20" (114mm x 508mm)
4-1/2" x 20" (114mm x 508mm)
1
5
20
50
1
5
20
50
1
5
20
50
1
5
20
50
<1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
<1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
<1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
<1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
<1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
<1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
<1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
<1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
<1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
<1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
<1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
<1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
<1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
<1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
<1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
<1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
Materials of Construction
• Media ............................Cellulose Polyester
• End Caps ....................Vinyl Plastisol
• Core ............................Polypropylene
• Temperature Rating ..40°F to 125°F (5°C to 52°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system.
144
Hydrotech
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 145
PS Series Spun-Bonded Polypropylene Cartridges
• Manufactured from pure 100% polypropylene.
• Designed for purity and chemical compatibility.
• Spun fibers form a true gradient density from outer to inner surfaces.
Our new PS Series of poly spun-bonded filter cartridges are manufactured
from pure 100% polypropylene fibers. The depth filtration cartridge construction offers greater performance flexibility in a broad range of solutions.
In water applications, polypropylene media will not impart taste, odor or colors
into the solution. For industrial applications, polypropylene offers superior
chemical resistance and is not prone to bacterial attack. The thermal bonding
process of the media eliminates the need for a core support while offering
resistance to collapse. This process also greatly reduces fiber migration.
PS Series cartridges are available in a wide range of lengths and micron sizes
to accommodate a broad range of vessel sizes and applications.
Item #
25569043
25569143
25569243
25569343
25569443
25569543
25569643
25569743
25569843
25569943
25570043
25570143
Model
PS1-10C
PS1-20C
PS1-30C
PS1-40C
PS5-10C
PS5-20C
PS5-30C
PS5-40C
PS20-10C
PS20-20C
PS20-30C
PS20-40C
Maximum
Dimensions
2-3/8” x 9-3/4” (60 mm x 248 mm)
2-3/8” x 20” (60 mm x 508 mm)
2-3/8” x 30” (60 mm x 762 mm)
2-3/8” x 40” (60 mm x 1016 mm)
2-3/8” x 9-3/4” (60 mm x 248 mm)
2-3/8” x 20” (60 mm x 508 mm)
2-3/8” x 30” (60 mm x 762 mm)
2-3/8” x 40” (60 mm x 1016 mm)
2-3/8” x 9-3/4” (60 mm x 248 mm)
2-3/8” x 20” (60 mm x 508 mm)
2-3/8” x 30” (60 mm x 762 mm)
2-3/8” x 40” (60 mm x 1016 mm)
Micron Rating
(Nominal)*
1
1
1
1
5
5
5
5
20
20
20
20
Initial ∆P (psi)
@ Flow Rate (gpm)
2.9 psi @ 5 gpm (<0.2 bar @ 18.9 lpm)
1.45 psi @ 5 gpm (<0.1 bar @ 18.9 lpm)
0.97 psi @ 5 gpm (<0.1 bar @ 18.9 lpm)
0.73 psi @ 5 gpm ( <0.1 bar @ 18.9 lpm)
1.0 psi @ 5 gpm (<0.1 bar @ 18.9 lpm)
0.5 psi @ 5 gpm (<0.1 bar @ 18.9 lpm)
0.33 psi @ 5 gpm (<0.1 bar @ 18.9 lpm)
0.25 psi @ 5 gpm (<0.1 bar @ 18.9 lpm)
0.7 psi @ 5 gpm (<0.1 bar @ 18.9 lpm)
0.35 psi @ 5 gpm (<0.1 bar @ 18.9 lpm)
0.23 psi @ 5 gpm (<0.1 bar @ 18.9 lpm)
0.18 psi @ 5 gpm (<0.1 bar @ 18.9 lpm)
*Based on manufacturer’s internal testing.
Materials of Construction
• Filter Media ............................Polypropylene Fibers
• Temperature Rating ..............40°F to 145°F (4.4°C to 62.8°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection or after the system.
Hydrotech
145
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 146
P Series Spun Bonded-Polypropylene Cartridges
• Manufactured from pure 100% polypropylene.
• Designed for purity and chemical compatibility.
• Spun fibers form a true gradient density from outer to inner surfaces.
P Series cartridges are manufactured from pure 100% polypropylene fibers.
The fibers have been carefully spun together to form a true gradient density
from outer to inner surfaces.
P Series cartridges are designed for purity. They will not impart taste, odor or
color to the liquid being filtered when used within the recommended
temperature limit. Additionally, the polypropylene construction provides
superior chemical resistance and is not prone to bacterial attack.
The coreless strength is achieved by sintering the many fibers into a solid
matrix.
P Series cartridges are available in a wide array of sizes and micron ratings
to accommodate all of your filtration needs.
The P1, P5, P1-20 and P5-20 are Tested and Certified by
NSF International to NSF/ANSI Standard 42 for material
requirements only.
COMPONENT
P1
P5
P1-30
P5-478 P1-20 P1-30
P5-20
P25-20
Item #
Model
Maximum
Dimensions
Micron Rating
(Nominal)*
Initial ∆P (psi)
@ Flow Rate (gpm)
15503043
P5-478
2-3/8” x 4-7/8” (61 mm x 124 mm)
5
0.3 psi @ 2 gpm (<0.1 bar @ 7.6 lpm)
15522543
P1
2-3/8” x 9-7/8” (61 mm x 251 mm)
1
0.6 psi @ 5 gpm (<0.1 bar @ 19 lpm)
15501443
P5
2-3/8” x 9-7/8” (61 mm x 251 mm)
5
0.2 psi @ 5 gpm (<0.1 bar @ 19 lpm)
15530405
P1-20
2-3/8” x 20” (61 mm x 508 mm)
1
0.6 psi @ 10 gpm (<0.1 bar @ 38 lpm)
15501605
P5-20
2-3/8” x 20” (61 mm x 508 mm)
5
0.6 psi @ 10 gpm (<0.1 bar @ 38 lpm)
15522605
P25-20
2-3/8” x 20” (61 mm x 508 mm)
25
0.2 psi @ 10 gpm (<0.1 bar @ 38 lpm)
15522706
P1-30
2-3/8” x 30” (61 mm x 762 mm)
1
0.5 psi @ 10 gpm (<0.1 bar @ 38 lpm)
15522806
P5-30
2-3/8” x 30” (61 mm x 762 mm)
5
0.2 psi @ 10 gpm (<0.1 bar @ 38 lpm)
*Based on manufacturer’s internal testing.
Materials of Construction
• Filter Media ............................Polypropylene Fibers
• Temperature Rating ..............40°F to 145°F (4.4°C to 62.8°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection or after the unit.
146
Hydrotech
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 147
Polydepth® Polypropylene Sediment Cartridges
• Thermally bonded polypropylene micro-fiber construction for higher filtration
efficiency.
• Consistent flow rate and superior filtration performance.
• Available in a wide range of micron ratings and lengths.
• Will not impart taste, odor or color to water being filtered.
• Ideal for a wide variety of industrial filtration.
The POLYDEPTH® filtration cartridge is constructed of thermally bonded
polypropylene microfibers to ensure high efficiency. The filter media incorporates
a rigid polypropylene center core for increased durability. This thermal bonded
micro-fiber construction offers no fiber release, consistent flow rate and superior
filtration performance. It also is not brittle or prone to breakage problems like
resin-bonded cartridges.
Unique micro-grooves provide added surface area. The polydepth cartridge will
not impart taste, odor or color to the liquid being filtered, which makes it ideal for
food and beverage applications. The recommended temperature limit of 40°F to
175°F (4.4°C to 79.4°C) allows it to be used in many hot water applications.
Additionally, the polypropylene construction provides superior chemical
resistance and is not prone to bacterial attack.
Available in different lengths from 9-3/4” up to 40”. Unlike competitive cartridges,
the longer lengths are not manufactured from shorter cartridges that are glued
together. They are continuous units that cannot separate during use.
POLYDEPTH cartridges are available in various micron ratings including 1-, 5-,
10-, 25-, and 50-microns.
Item #
15574843
15575543
15576243
15576943
15574943
15575643
15576343
15577043
15575043
15575743
15575143
15575843
15576543
15577243
15575243
15575943
Model
PD-1-934
PD-1-20
PD-1-30
PD-1-40
PD-5-934
PD-5-20
PD-5-30
PD-5-40
PD-10-934
PD-10-20
PD-25-934
PD-25-20
PD-25-30
PD-25-40
PD-50-934
PD-50-20
Maximum
Dimensions
2- 1/2” x 9- 7/8” (64mm x 251mm)
2-1/2” x 20” (64mm x 510mm)
2-1/2” x 30” (64mm x 763mm)
2-1/2” x 40” (64mm x 1017mm)
2-1/2” x 9-7/8” (64mm x 251mm)
2-1/2” x 20” (64mm x 510mm)
2-1/2” x 30” (64mm x 763mm)
2-1/2” x 40” (64mm x 1017mm)
2-1/2” x 9-7/8” (64mm x 251mm)
2-1/2” x 20” (64mm x 510mm)
2-1/2” x 9-7/8” (64mm x 251mm)
2-1/2” x 20” (64mm x 510mm)
2-1/2” x 30” (64mm x 763mm)
2-1/2” x 40” (64mm x 1017mm)
2-1/2” x 9-7/8” (64mm x 251mm)
2-1/2” x 20” (64mm x 510mm)
Micron Rating
(Nominal)
1
1
1
1
5
5
5
5
10
10
25
25
25
25
50
50
Initial ∆P (psi)
@ Flow Rate (gpm)
All 9-7/8” cartridges are rated at
<2 psi @ 2 gpm (<0.14 bar @ 7.6 lpm)
All 20” cartridges are rated at
<2 psi @ 5 gpm (<0.14 bar @ 19 lpm)
All 30” cartridges are rated at
<2 psi @ 7 gpm (<0.14 bar @ 26.5 lpm)
All 40” cartridges are rated at
<2 psi @ 9 gpm (<0.14 bar @ 34 lpm)
Materials of Construction
• Filter Media ............................Polypropylene
• Maximum Temperature..40°F to 175°F (4.4°C to
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
Hydrotech
147
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 148
DGD Series Dual-Gradient Density Cartridges
• Manufactured from 100% pure polypropylene.
• Designed for purity and chemical compatibility.
• Two separate gradient density layers enhance cartridge performance.
• Three times the dirt-holding capacity of similar sized sediment cartridges.
DGD Series cartridges are manufactured from 100% pure polypropylene and
are sized for use in our Big Blue® filter housings.
DGD Series cartridges are designed for purity and will not impart taste, odor or
color to the liquid being filtered. Additionally, the polypropylene construction
provides superior chemical resistance and is not prone to bacterial attack.
The DGD Series advanced design combines selective “final filtration” with
appropriate “pre-filtration” to achieve up to three times the dirt-holding capacity
of similar size sediment cartridges and many more times that of standard spun
or string-wound cartridges. This performance enhancement is achieved by
combining two separate gradient layers in one filter.
The larger diameter of the pre-filter reduces the particle load to the post filter,
allowing it to operate at higher velocities. The effective filter depth is increased
to a full 233% of standard spun-polypropylene or string-wound filters. This
increased depth provides for very high particulate reduction efficiencies and
added loaded capacity.
The unique design and performance characteristics of the DGD Series
cartridges make them an excellent choice for all residential, rural, municipal and
commercial applications.
Item #
Model
15535943
DGD-2501
Maximum
Dimensions
Micron Rating
(Nominal)
4-1/2” x 10”
Pre-filter: 25;
Post-filter: 1
Pre-filter: 25;
Post-filter: 1
Pre-filter: 50;
Post-filter: 5
Pre-filter: 50;
Post-filter: 5
Pre-filter: 75;
Post-filter: 25
Pre-filter: 75;
Post-filter: 25
(114 mm x 254 mm)
15536043
DGD-2501-20
4-1/2” x 20”
(114 mm x 508 mm)
15535743
DGD-5005
4-1/2” x 10”
(114 mm x 254 mm)
15535843
DGD-5005-20
4-1/2” x 20”
(114 mm x 508 mm)
15535543
DGD-7525
4-1/2” x 10”
(114 mm x 254 mm)
15535643
DGD-7525-20
4-1/2” x 20”
(114 mm x 508 mm)
DGD-2501-20
DGD-5005-20
DGD-7525-20
DGD-2501
DGD-5005
DGD-7525
Initial ∆P (psi)
@ Flow Rate (gpm)
<1 psi @ 10 gpm
(<0.1 bar @ 38 lpm)
<1 psi @ 20 gpm
(<0.1 bar @ 76 lpm)
<1 psi @ 10 gpm
(<0.1 bar @ 38 lpm)
<1 psi @ 20 gpm
(<0.1 bar @ 76 lpm)
<1 psi @ 10 gpm
(<0.1 bar @ 38 lpm)
<1 psi @ 20 gpm
(<0.1 bar @ 76 lpm)
Materials of Construction
• Filter Media ......................Polypropylene
• Temperature Rating ........40°F to 145°F (4.4°C to 62.8°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system.
148
Hydrotech
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 149
CW/WP Series Polypropylene Wound Cartridges
• String-wound design reduces fine sediment from a variety of
fluids.
• Withstands temperatures up to 165°F (73.9°C)
• Economically priced.
• Nominal 10, 30, 50-micron rating (CW) and nominal 5, 30micron rating (WP).
CW and WP Series cartridges are manufactured from a durable
polypropylene cord that is wound around a rigid polypropylene
core. They are an economical solution to reduce fine sediment,
including sand, silt, rust and scale particles.
CW cartridges are very economical and wound in a standard
pattern around the core. They are available in 10, 30 and 50micron ratings.
WP Series cartridges are wound in a precise pattern around the
core providing greater surface area. The result is higher dirtloading capacity and greater efficiency than standard wound
cartridges like the CW.
WP-30
WP-5
CW-MF
CW-F
Both of these string-wound cartridge styles are capable of withstanding temperatures up to 165°F (73.9°C), and will
accommodate flow rates between 7 and 10 GPM with minimal
pressure drop.
CW-50
CW and WP Series cartridges are suitable for a wide variety of
sediment filtration applications, including municipal and well
water as well as many industrial fluids.
Item #
Model
15518643
CW-F
15518743
CW-MF
15521443
CW-50
15507143
WP-5
15507243
WP-30
Maximum
Dimensions
Micron Rating
(Nominal)
Initial ∆P (psi)
@ Flow Rate (gpm)
2-3/8” x 9-7/8”
(60mm x 251mm)
2-3/8” x 9-7/8”
(60mm x 251mm)
2-3/8” x 9-7/8”
(60mm x 251mm)
2-3/8” x 9-7/8”
(60mm x 251mm)
2-3/8” x 9-7/8”
(60mm x 251mm)
10
<1 psi @ 7 gpm
(<0.1 bar @ 27 lpm)
<1 psi @ 10 gpm
(<0.07 bar @ 38 lpm)
<1 psi @ 10 gpm
(<0.07 bar @ 38 lpm)
<2.5 psi @ 10 gpm
(<0.17 bar @ 38 lpm)
<1.4 psi @ 10 gpm
(<0.10 bar @ 38 lpm)
30
50
5
30
Materials of Construction
• Filter Media ............................Polypropylene Fiber Cord
• Core ........................................Polypropylene
• Temperature Rating ..............40°F to 165°F (4.4°C to 73.9°C)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system.
Hydrotech
149
HY Catalog CDN 135-150 Pentek.qxp
5/27/2009
9:48 AM
Page 150
Big Blue Polypropylene Wound Cartridges
The WP-BB Series cartridges are constructed of fibrous
polypropylene media which as been wound around a
polypropylene core. Available in nominal micron ratings
ranging from 0.5 to 10, and both 9-7/8” and 20” lengths.
The WPX-BB Series cartridges are constructed of
fibrillated polypropylene wound on a polypropylene core.
The fibrillated polypropylene should be used when
pressures require minimization of extractables and/or
fiber migration. They are available in nominal micron
ratings ranging from 5 to 100, and in both 9-7/8” and 20”
lengths.
WP5BB97P
Item #
26100/
35521243
150100/
35521343
26101/
35521443
26102/
35521543
26103/
35521643
26127/
35522243
70004/
35522343
26128/
35522543
26104/
35521743
26123/
35521843
26124/
35521943
26125/
35522043
26126/
35522143
26129/
35522643
Model
WP5BB97P
WP1BB97P
WP5BB97P
WP10BB97P
WP25BB97P
WP1BB20P
WP5BB20P
WP25BB20P
WPX5BB97P
WPX10BB97P
WPX25BB97P
WPX50BB97P
WPX100BB97P
WPX100BB20P
Maximum
Dimensions
4-1/2” x 9-7/8”
(114 mm x 251 mm)
4-1/2” x 9-7/8”
(114 mm x 251 mm)
4-1/2” x 9-7/8”
(114 mm x 251 mm)
4-1/2” x 9-7/8”
(114 mm x 251 mm)
4-1/2” x 9-7/8”
(114 mm x 251 mm)
4-1/2” x 20”
(114 mm x 508 mm)
4-1/2” x 20”
(114 mm x 508 mm)
4-1/2” x 20”
(114 mm x 508 mm)
4-1/2” x 9-7/8”
(114 mm x 251 mm)
4-1/2” x 9-7/8”
(114 mm x 251 mm)
4-1/2” x 9-7/8”
(114 mm x 251 mm)
4-1/2” x 9-7/8”
(114 mm x 251 mm)
4-1/2” x 9-7/8”
(114 mm x 251 mm)
4-1/2” x 20”
(114 mm x 508 mm)
WPX5BB97P
Micron Rating
(Nominal)
0.5
Max Recommended
Flow Rate
10 gpm (38 lpm)
Pressure
Drop
5 psi (0.3 bar)
1
15 gpm (57 lpm)
4 psi (0.3 bar)
5
20 gpm (76 lpm)
3 psi (0.2 bar)
10
20 gpm (76 lpm)
1 psi (0.1 bar)
25
20 gpm (76 lpm)
1 psi (0.1 bar)
1
30 gpm (114 lpm)
6 psi (0.4 bar)
5
40 gpm (151 lpm)
6 psi (0.4 bar)
25
40 gpm (151lpm)
5 psi (0.3 bar)
5
10 gpm (38 lpm)
16 psi (1.1 bar)
10
15 gpm (57 lpm)
12 psi (0.8 bar)
25
20 gpm (76 lpm)
10 psi (0.7 bar)
50
30 gpm (114 lpm)
8 psi (0.6 bar)
100
40 gpm (151 lpm)
8 psi (0.6 bar)
100
65 gpm (246 lpm)
8 psi (0.6 bar)
Materials of Construction
• Construction ..........................Fibrous Polypropylene, Polypropylene Core
• Temperature Rating ..............40°F to 165°F (4.4°C to 73.9°C)
WARNING: Filter must be protected from freezing which can cause cracking of the filter and water leakage. For drinking water applications,
do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection or after the unit.
150
Hydrotech
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 151
BP, BPHE & BN Series Filter Bags
• Thermally welded unique design results in consistent
filtration efficiencies.
• Semi-rigid cylindrical design is easily crushed and
incinerated.
• Higher productivity - faster bag “change-outs.”
Woven monofilament materials are offered in nylon with
micron rates of 50-800 and efficiencies from 75 to 95
percent. The materials are cleanable and reusable.
* Call for availability
Polypropylene bags are compatible with a broad range
of corrosive fluids including organic solvent, oils, acids,
alkalis and micro-organisms.
BP Series (Polypropylene Felt) Bags
An assortment of filtration ratings is offered - from 1 to
200 microns - to comply with any filtration requirement.
The bags are manufactured from felt because of its
high solids loading capabilities, in comparison to similar
mesh fabrics. The media is created by needle-punching
two layers of synthetic fibers together in a supporting
scrim. A glazed finish, created by melting the outermost
surface fibers, is used to produce a bond that reduces
the possibility of migration.
BPHE Series (High Efficiency) Bags*
High efficiency bags are offered for those critical applications when high efficiency combined with high dirtholding capacity is required. Polypropylene materials
are processed into microfibers with diameters of 1-10
microns or more. These fibers are converted into filter
material. Microfiber media are covered with spunbonded polypropylene.
Item #
15538303
15538403
15538503
15538603
15538703
15538803
15538903
15539003
15539103
15539203
15539303
15539403
15539503
15539503
Model
BP-410-1 (10”)
BP-420-1 (20”)
BP-410-5 (10”)
BP-420-5 (20”)
BP-410-10-(10”)
BP-420-10 (10”)
BP-410-25 (20”)
BP-420-25 (10”)
BP-410-50 (10”)
BP-420-50 (20”)
BP-410-100 (10”)
BP-420-100 (20”)
BP-410-200 (10”)
BP-420-200 (20”)
Dimensions
BP-410
4" x 8-5/8"
(102 mm x 218 mm)
BP-420
4" x 18"
(102 mm x 457 mm)
Filter
Media
Glazed
Polypropylene
Felt
Micron
Rating
1
1
5
5
10
10
25
25
50
50
100
100
200
200
Case
Quantity
20
20
20
20
20
20
20
20
20
20
20
20
20
20
Materials of Construction
• Maximum Temperature.................200°F (93.3°C) (bags only)
See application literature for housing rating.
WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
NOTE: This information is for general guidance. Users should test bag materials with media involved to determine compatibility.
CAUTION: Protect against freezing which can cause cracking of the filter and water leakage.
Hydrotech
151
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 152
Quick-Change Filtration Systems
• Easy to install, easy filter change.
• Unique cover for single unit for a more appealing look.
• Reversible metal brackets for 1, 2 or 3 cartridges†
• 1/4-inch or 3/8-inch John Guest® push-fit connections available.
• 1/4-inch compression connections available for flex hose connections.
• Seven cartridge models to choose from to meet specific application
needs.
†The Twin and Triple systems are not performance tested or certified by NSF.
PENTEK® Quick Change Filtration Systems are designed for easy installation and cartridge change. 1/4-inch or 3/8-inch push fittings, as well as
1/4-inch compression fittings, on the inlet and outlet sides of the filter
head allow effortless installation. Many single systems are NSF Certified.
The cartridge filter is easily changed with a quarter-turn of the filter.
Water is automatically shut off during the change of the filter through the
auto shut-off feature built into the filter head. This feature eliminates the
need for additional shut-off valves to and from the filter system.
The PENTEK quick-change filter system offers several cartridge options
to meet the demands of varying water conditions. The granular activated
carbon cartridge offers extended chlorine taste and odor performance
with low pressure drop.* The EP carbon block filter offers superior
chlorine taste and odor performance with 5 micron sediment reduction.*
The CBR carbon block cartridge has enhanced performance capabilities
for chlorine taste & odor, cyst, lead, atrazine and lindane reduction.
The new cartridges include carbon/phosphate cartridge, chloramine
reduction cartridge, sediment only cartridge, a high performance 1micron carbon block cartridge, and the soon to be released membrane
filter cartridge for bacteria and virus reduction.*
* Shown with optional
designer cover
COMPONENT
The QC10-CBR is Tested and Certified by NSF/ANSI
to Standard 42 for the reduction of Chlorine Taste &
Odor and Particulate Class 1. Standard 53 Atrazine,
Cyst, Lead, Lindane and Turbidity.
*Not performance tested or certified by NSF.
QC10-EP is Tested and Certified by NSF/ANSI to
Standard 42 for the reduction of Chlorine Taste & Odor.
#144842
#244426
#244427
#244435
#244436
#15578543
#15596243
#15590143
#25570643
#25570443
#25570543
#25568843
152
QCH 1/4" Threaded Replacement Head
QCH 1/4" PF Replacement Head
QCH 3/8" PF Replacement Head
QC Replacement Head 1/4" JGPF New Design
QC Replacement Head 3/8" JGPF New Design
QC-210-CBR-RP Replacement Cartridge
QC-210-EP-RP Replacement Cartridge
QC-210-GAC-RP Replacement Cartridge
QC10-TSGACR Replacement Cartridge
QC10-CGACR Replacement Cartridge
QC10-CB1R Replacement Cartridge
QC10-Sed1R Replacement Cartridge
Hydrotech
QC10-GAC is Tested and Certified by NSF/ANSI to
Standard 42 for the reduction of Chlorine Taste & Odor.
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 153
Quick-Change Filtration Systems Specifications
1/4”
Threaded
Item #
1/4” JG
Push Fit
3/8” JG
Push Fit
Model
Cartridge
Color
158667
158682
158691
QC10-CBR
White
–
158683
–
QC10-EP
–
158684
–
–
158723
–
158719
Filter
Life
Flow
Rate
Micron
Rating
chlorine taste & odor,
sediment, lead, atrazine,
lindane, cyst & turbidity
500 gallons
(1890 L)
0.5 gpm
(1.9 lpm)
0.5
White
chlorine taste & odor
1,500 gallons
(5670 L)
0.5 gpm
(1.9 lpm)
5*
QC10-GAC
Blue
chlorine taste & odor
2,500 gallons
(9460 L)
0.75 gpm
(2.8 lpm)
–
158724
QC10-TSGAC†
Blue
chlorine taste & odor with
phosphate crystals†
1,700 gallons
(6435 L)*
0.75 gpm
(2.8 lpm)
–
158720
QC10-CGAC†
Blue
chloramine taste & odor and
chlorine taste & odor†
500 gal. (1890 L)
chloramine*
10,000 gal. (37850 L)
chlorine*
0.6 gpm
(2.3 lpm)
–
Claims
*Filter life based on chlorine reduction as tested by Pentek.
†Not Performance Tested or Certified by NSF.
CAUTION: Protect against freezing to prevent cracking of the filter housing and water leakage.
NOTE: Cartridge will contain a very small amount of carbon fines (a very fine black powder). After installation and before using the water
follow the instructions for flushing the cartridge to remove fines.
U.S. Patent Numbers: 5,976,432 and 5,823,668
Hydrotech
153
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 154
Gold In-Line Filtration Systems
• 5 body styles of in-line filters in multiple media configurations.
• Injection molded and pressure rated to 125 psi (8.62 bar).
• All in-line filters include a pre- and post-filter.
The new PENTEK Gold Series® in-line filters offer an extensive variety of
products to meet your most challenging applications. PENTEK in-line filters
are designed for use on any point of use drinking water appliance including
reverse osmosis (RO) systems, distillation systems, coffee and espresso
brewers, food service equipment, ice machines, misters, bottleless water
coolers, water fountains, refrigerators and other water dispensing devices.
Gold Series® in-line filtration features coconut shell granular activated
carbon. Various combinations of media are used to support a wide range of
filtration applications. These combinations include FDA compliant hexametaphosphates, KDF® 55 and KDF® 85 media, gradient depth sediment
filters, calcite media, cation softening resins and mixed bed deionization (DI)
resins to meet the wide variety of aesthetic improvements required.
The in-line filtration systems also offer a wide variety of end termination and
fitting options including 1/4” and 3/8” female NPT, 1/4” and 3/8” female Quick
Connect (John Guest® style), 1/4” OD Stem and 1/4” male Jaco thread.
Item #
Model
Bituminous Granular Activated Carbon
25549943
GS-6-B-1/4" FPT 2" x 6"
25550143
GS-6-G-1/4" John Guest® 2" x 6"
25550243
GS-6-H-3/8" John Guest® 2" x 6"
25550343
GS-10-B-1/4" FPT 2" x 10"
25550543
GS-10-G-1/4" John Guest® 2" x 10"
25550643
GS-10-H-3/8" John Guest® 2" x 10"
25550743
GS-210-B-1/4" FPT 2.5" x 11"
25550843
GS-210-C-3/8" FPT 2.5" x 11"
25551443
GS-215-H-3/8" John Guest® 2.5" x 14"
Coconut Shell Granular Activated Carbon
25551543
GS-6RO-B-1/4" FPT 2" x 6"
25551943
GS-6RO-G-1/4" John Guest® 2" x 6"
25552143
GS-10RO-B-1/4" FPT 2" x 10"
25552243
GS-10RO-C-3/8" FPT 2" x 10"
25552543
GS-10RO-G-1/4" John Guest® 2" x 10"
25552643
GS-10RO-H-3/8" John Guest® 2" x 10"
25552843
GS-210RO-C-3/8" FPT 2.5" x 11"
25553143
GS-215RO-B-1/4" FPT 2.5" x 14"
pH Stabilizer (Calcite & Coconut Shell Carbon) Post RO
25554143
GS-10CAL/RO-B-1/4" FPT 2" x 10"
25554643
GS-10CAL/RO-H-3/8" John Guest® 2" x 10"
Bacteriostatic (KDF & Coconut Shell Carbon)
25554743
GS-6EXTRA.25-B-1/4" FPT 2" x 6"
25554843
GS-6EXTRA.25-C-3/8" FPT 2" x 6"
25555143
GS-6EXTRA.25-G-1/4" John Guest® 2" x 6"
25555343
GS-10EXTRA.5-B-1/4" FPT 2" x 10"
25555443
GS-10EXTRA.5-C-3/8" FPT 2" x 10"
25555743
GS-10EXTRA.5-G-1/4" John Guest® 2" x 10"
25555943
GS-210EXTRA1-B-1/4" FPT 2.5" x 11"
25556043
GS-210EXTRA1-C-3/8" FPT 2.5" x 11"
25556143
GS-210EXTRA1-G-1/4" John Guest® 2.5" x 11"
154
Hydrotech
Microns
(nominal)
Volume
(cubic ft)
Weight
(lbs)
Case
Quantity
20
20
20
20
20
20
20
20
20
0.24
0.24
0.24
0.37
0.37
0.37
0.61
0.61
0.61
6
6
6
9
9
9
10
10
12
12
12
12
12
12
12
12
12
12
5
5
5
5
5
5
5
5
0.24
0.24
0.37
0.37
0.37
0.37
0.61
0.61
6
6
12
12
12
12
14
18
12
12
12
12
12
12
12
12
20
20
0.37
0.37
13
13
12
12
5
5
5
5
5
5
5
5
5
0.24
0.24
0.24
0.37
0.37
0.37
0.61
0.61
0.61
10
10
10
15
15
15
24
24
24
12
12
12
12
12
12
12
12
12
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 155
Gold In-Line Filtration Specifications
Microns
Item #
Model
(nominal)
Sediment & Rust Particulate
25556943
GS-6SED/5-B-1/4" FPT 2" x 6"
5
25557343
GS-6SED/5-G-1/4" John Guest® 2" x 6"
5
25557643
GS-10SED/5-C-3/8" FPT 2" x 10"
5
25557943
GS-10SED/5-G-1/4" John Guest® 2" x 10"
5
25558243
GS-210SED/5-C-3/8" FPT 2.5" x 11"
5
25558743
GS-215SED/5-G-1/4" John Guest® 2.5" x 14"
5
25558843
GS-215SED/5-H-3/8" John Guest® 2.5" x 14"
5
Lime, Scale, & Chlorine Taste & Odor (Hexametaphosphate & Coconut Shell Carbon)
25558943
GS-6ALS-B-1/4" FPT 2" x 6"
20
25559043
GS-6ALS-C-3/8" FPT 2" x 6"
20
®
25559343
GS-6ALS-G-1/4" John Guest 2" x 6"
20
25559543
GS-10ALS-B-1/4" FPT 2" x 10"
20
25559643
GS-10ALS-C-3/8" FPT 2" x 10"
20
25559943
GS-10ALS-G-1/4" John Guest® 2" x 10"
20
25560043
GS-10ALS-H-3/8" John Guest® 2" x 10"
20
Lime & Scale (Hexametaphosphate Feeder)
25560143
GS-6PH-B-1/4" FPT 2" x 6"
–
25560343
GS-10PH-B-1/4" FPT 2" x 10"
–
–
25560443
GS-10PH-G-1/4" John Guest® 2" x 10"
Chlorine Taste & Odor - 1 Micron Carbon Block Filters
25560943
GS-6CB-1-G-1/4" John Guest® 2" x 6"
1
25561543
GS-10CB-1-G-1/4" John Guest® 2" x 10"
1
25561643
GS-10CB-1-H-3/8" John Guest® 2" x 10"
1
25561743
GS-210CB-1-B-1/4" FPT 2.5" x 11"
1
25561843
GS-210CB-1-C-3/8" FPT 2.5" x 11"
1
Chlorine Taste & Odor - 5 Micron Carbon Block Filters
25562543
GS-6CB-5-B-1/4" FPT 2" x 6"
5
25562643
GS-6CB-5-C-3/8" FPT 2" x 6"
5
25562943
GS-6CB-5-G-1/4" John Guest® 2" x 6"
5
25563043
GS-6CB-5-H-3/8" John Guest® 2" x 6"
5
25563143
GS-10CB-5-B-1/4" FPT 2" x 10" 5 0.37
9
25563243
GS-10CB-5-C-3/8" FPT 2" x 10" 5 0.37
9
25563543
GS-10CB-5-G-1/4" John Guest® 2" x 10"
5
25563643
GS-10CB-5-H-3/8" John Guest® 2" x 10"
5
25563743
GS-210CB-5-B-1/4" FPT 2.5" x 11"
5
25563943
GS-210CB-5-G-1/4" John Guest® 2.5" x 11"
5
25564143
GS-215CB-5-B-1/4" FPT 2.5" x 14"
5
25564243
GS-215CB-5-C-3/8" FPT 2.5" x 14"
5
25564343
GS-215CB-5-G-1/4" John Guest® 2.5" x 14"
5
25564443
GS-215CB-5-H-3/8" John Guest® 2.5" x 14"
5
Lead, Cyst, Particulate, & Chlorine Taste & Odor Filters
25564943
GS-10LS-G-1/4" John Guest® 2" x 10"
0.5
25565143
GS-210LS-B-1/4" FPT 2.5" x 11"
1
TDS Reduction - High Capacity DI Resin Filters
25565543
GS-210DI-B-1/4" FPT 2.5" x 11"
20
25565943
GS-215DI-B-1/4" FPT 2.5" x 11"
20
INLINE FILTER CLIPS
244454
HF-CLIP1 – 2" Single Inline Filter Clip
–
244455
HF-CLIP2 – 2.5" Single Inline Filter Clip
–
Volume
(cubic ft)
Weight
(lbs)
Case
Quantity
0.24
0.24
0.37
0.37
0.61
0.61
0.61
5
5
7
7
14
18
18
12
12
12
12
12
12
12
0.24
0.24
0.24
0.37
0.37
0.37
0.37
6
6
6
10
10
10
10
12
12
12
12
12
12
12
0.24
0.24
0.24
13
22
22
12
12
12
0.24
0.37
0.37
0.61
0.61
5
9
9
11
11
12
12
12
12
12
0.24
0.24
0.24
0.24
12
12
0.37
0.37
0.61
0.61
0.61
0.61
0.61
0.61
5
5
5
5
12
12
12
12
9
9
11
11
13
13
13
13
12
12
12
12
12
12
12
12
0.37
0.61
9
15
12
12
0.61
0.61
17
24
12
12
–
–
–
–
100
100
Hydrotech
155
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 156
Sealed In-Line Series
• Provide bad taste & odor and chlorine taste & odor reduction.
• Injection molded and pressure rated to 125 psi.
• All in-line filters include a pre- and post-filter.
Sealed In-Line filters feature coconut shell, granular activated carbon, and are
designed to reduce unwanted taste, odor and chlorine taste and odor.
The TS-101L contains a combination of GAC and polyphosphate crystals to
inhibit lime/scale build-up.
All Sealed In-Line filters include a durable, injection molded polypropylene
body and cap, pre- and post-filter and are pressure rated to 125 psi. Available
with 1/4” NPT connections.
Sealed In-Line filters are an ideal choice for post-RO, under-sink, ice-maker
and food service applications.
Contact factory regarding availability of other sizes and media.
The IC-101L and TS-101L are
Tested and Certified by NSF
International.
COMPONENT
Item #
15507020
15508301
Model
IC-100 (c/w fittings)
TS-100 (c/w fittings)
Media
17 cu. in.
16 cu. in.
Maximum
Dimensions
(51 mm x 270 mm)
(51 mm x 270 mm)
Estimated
Life
(9,460 liters)
(6,450 liters)
Flow Rate
(gpm)
(2.8 L/min)
(2.8 L/min)
Materials of Construction
• Body ........................................Polypropylene
• Cap ..........................................Polypropylene
• Pre-filter and Post-filter .........Polypropylene
• Carbon ...................................Coconut Shell GAC
• Maximum Temperature ........100°F (37.8°C)
• Operating Pressure...............125 psi (8.62 bar)
WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
NOTE: Cartridges will contain a very small amount of fines (very fine powder) and new cartridges, after installation, should be flushed with
sufficient water to remove all traces of fines from your water system before use. Each time you use your filtered water tap for drinking or
cooking purposes, it is recommended that you run (flush) the tap for at least 10 seconds prior to using water. This is particularly important if
the water tap has not been used daily.
CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
156
Hydrotech
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 157
CRE-1 Ceramic Cartridges
• Specially designed for cyst reduction and fine sediment filtration applications.
• 1/2” thick ceramic wall allows for many cleanings, extending cartridge life.
• Nominal 1-micron rating.
CRE-1 cartridges are manufactured from a sintered ceramic filtration media.
They are designed and tested for the reduction of Cryptosporidium and Giardia
cysts, and are ideal for fine sediment filtration applications.
The fine ceramic media will effectively trap dirt, sediment, and cysts down to 1micron in diameter. A proper fit is ensured and water bypass is prevented
through the use of a knife-edge seal.
CRE-1 cartridges are easily cleaned with water and a damp cloth, sponge or stiff
nylon brush. They can be cleaned several times until the diameter at the
smallest point is 1-1/2” or the circumference is 4-3/4”, extending cartridge life.
Not for residential sale in the state of California.
Item #
Model
15515943
CRE-1
Maximum
Dimensions
Micron Rating
(Nominal)
Initial ∆P (psi)
@ Flow Rate (gpm)
1 7/8” x 9 3/4”
(48 mm x 248 mm)
1
(3-4 @ 99.95%)
19 psi @ 1 gpm
(1.3 bar @ 3.8 lpm)
Materials of Construction
• Filter Media ....................Sintered Ceramic
• End Caps ........................Thermoset Polymeric
• Gaskets ........................Buna-N
• Temperature ................40° to 125°F (4.4° to 52°C)
NOTE: Performance depends on system design, flow rate, feed water quality and certain other application conditions. Certain states require system registration
or certification prior to sale if health-related contaminant reduction claims are made. Not for residential sale in the state of California.
NOTE: Only a thin layer of ceramic is removed with each cleaning. It is not necessary to clean the cartridge until the original color is restored as water in some
locations may stain or discolor the ceramic. Good hygiene and house keeping practices should always be used when cleaning the CRE-1 cartridge.
HANDLE CARTRIDGE WITH CARE! Sharp blows, dropping, or freezing can cause cracks in the ceramic. If the cartridge should be cracked or frozen, discard
the damaged cartridge and replace it with a new cartridge.
CAUTION: Do not use where water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the unit. Cartridge
is specifically designed for sediment filtration and the reduction of Giardia and Cryptosporidium cysts, not to kill or filter bacteria.
Hydrotech
157
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 158
Microguard™ Membrane Filter Cartridges
• Absolute 0.15 micron particle retention for bacteria and protozoan cyst
reduction.
• 99.9999% bacteria reduction (>6 Log).
• 99.9999% cyst reduction (>6 Log).
• Combined carbon block and sediment pre-filtration for extended life and
chlorine taste and odor reduction.
• Utilizes patented* highly asymmetric polyethersulfone membrane with
proprietary hydrophilic formulation for immediate wetting and high flow.
• Double O-ring end cap seals for absolute sealing in PENTEK Seal-Safe™ 3G
housings.
The Microguard™ membrane filters provide reliable bacteria and protozoan
cyst reduction for safer and cleaner drinking water without incorporating
chemicals into the media or adding chemicals to the filtered water. The
Microguard carbon block membrane cartridge, MG-10MCB, is uniquely
designed with integral carbon block and sediment pre-filtration for the reduction
of chlorine taste and odor and for providing extended life of the internal
membrane element. This cartridge has 2.5 times greater filtration surface area
than some anti-microbial carbon blocks and operates at a higher flow rate with
lower pressure drop. This makes the MG-10MCB ideal for Point-of-Use (POU)
applications. The Microguard cartridges do not require USEPA registration and
their effectiveness is not susceptible to common substances normally found in
some waters, e.g., hydrogen sulfide (H2S), natural organic matter (NOM) and
total dissolved solids (TDS).
MG-10T
MG-10MCB
The Microguard triple-element cartridge, MG-10T, is uniquely constructed with
three membrane elements integrally sealed into one common cartridge design.
This unique design allows for higher flow rates and longer life while still
providing bacteria and cyst reduction, and is ideal for applications up to five
gallons per minute. The life of the MG-10T can be extended using PENTEK
carbon block or sediment pre-filtration options.
Item #
Model
Description
Maximum
Length
Maximum
Diameter
Micron
Rating
25542043
MG-10MCB
25541943
MG-10T
25568243
MG-CCBR
Carbon Block/
Membrane
Triple Element
(membrane only)
Coconut Carbon
Lead/Cyst Reduction
10.283”
(261.18 mm)
10.294”
(261.47 mm)
10.294”
(261.47 mm)
2.875”
(73 mm)
3.0”
(76 mm)
3.0”
(76 mm)
0.15
absolute rating
0.15
absolute rating
0.15
absolute rating
Materials of Construction
• Membrane ..............................Polyethersulfone
• O-ring Seals ..................EPDM
• Membrane Assembly ............Polystyrene, epoxy resin
• Netting ..........................Polyolefin (10MCB only)
• Carbon Pre-Filter ..................MG-10MCB with Fibredyne™ technology contains activated carbon with
synthetic Polymeric fibers and binders
• End Caps/Body ......................Polystyrene, excluding the bottom of the MG-10MCB which is Polypropylene
NOTE: These cartridges are not intended for converting wastewater or raw sewage into drinking water.
*U.S. Patent No. 5,240,862
Not certified for sale in California, Iowa, Massachusetts and Wisconsin.
158
Hydrotech
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 159
Oil Adsorbing Cartridges
• Modified cellulose-based filter chemically bonds specifically with hydrocarbons and other pollutants such as dissolved and dispersed oils from water.
• Instantaneous adsorption, more effective than activated carbon.
• Up to 90 percent of total hydrocarbons are removed in a single pass.
• For use in 20-inch Big Blue® filter housings.
The OAC-20BB, made from modified cellulose-based filter media, is
processed into sheets and assembled into cartridges for use in standard 20”
Big Blue® filter housings.
Features
• Instantaneous adsorption - up to 90 percent of total hydrocarbons removed
in a single pass.
• High flow rates.
• Removed dissolved and dispersed oils.
• Low pressure drop.
• Media can hold 250-300 percent of its own weight, with no release of
removed hydrocarbons.
Applications
• Gas and oil facilities • Leisure/commercial shipping bilge water • Surface
water runoff (truck stops, airports, parking lots) • Auto service stations
• Machine shops • Industrial processes • Factories and repair shops • Car
and truck washes
Installation
Certain applications may require pre-filtration
Change-Out Frequency
Change-out frequency will depend on the oil burden they have to handle.
Because no appreciable increase in pressure drop is observed during service
life, the filter must be changed when its adsorption capacity is exhausted.
Item #
15559603
Model
OAC-20BB
Maximum
Dimensions
Length: 20.125” (511 mm)
Outside Diameter: 4.5” (114 mm)
Core ID: 1.110” (28 mm)
Pressure Drop
(at 5-10 gpm)
0.2 - 1.0 psi
(0.01-0.07 bar)
Recommended
Flow Rate
5-10 gpm
(19-38 lpm)
Materials of Construction
•
•
•
•
Media ......................................Modified Cellulose
• Outer Net..................Polyethylene
End Caps ................................PVC Plastisol
• Media Area ..............18 sq.ft. (1.6 sq.m.)
Center Core ............................Natural Polypropylene
• Weight ......................1.75 lbs (0.8 kg)
Temperature Rating ..............40°F to 125°F (4.4°C to 52°C)
NOTE: Operating flow will vary based on applications, type of pollutants, flow rates, level of contamination.
DISPOSAL: Safe and acceptable method to meet all local and EPA regulations is recommended. End user is responsible for safe disposal of
used cartridge at user’s costs. Consult factory for additional information
Hydrotech
159
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 160
PCC Series Hexametaphosphate Crystal Cartridges
• Effective at treating scale, corrosion and iron problems.
• Ideal for a variety of food service equipment, as well as other
types of water processing equipment.
PCC212
PCC218
PCC Series cartridges contain food-grade hexametaphosphate
that dissolves slowly in water to inhibit scale and rust build-up.
This type of treatment is recommended for use with ice
machines, coffee and vending machines, food service
equipment, water heaters, air conditioning equipment and many
other types of water processing equipment.
To best meet your needs, cartridges are available in four feeder
sizes and all materials are FDA grade.
They are highly effective at treating scale, corrosion and iron
problems for up to six months at various flow rates and feed concentrations.
The PCC212 and PCC218 cartridges are designed to fit #10
Standard or Slim Line® filter housings.
The PCC106 is an insert element that is placed in the center
core of the cartridge. It is designed for use with standard 10” and
20” radial flow, sediment and carbon block filter cartridges.
PCC106
PCC1
Item #
Model
Dimensions
Recommended Flow Rate (gpm)
15510043
PCC1
2-7/8” x 9-5/8”
(73mm x 244mm)
Up to 5 gpm
(19 lpm)
15524803
PCC212
2-5/8” x 9-3/4”
(67mm x 248mm)
1 to 1.5 gpm
(4 to 6 lpm)
15525103
PCC218
2-5/8” x 9-3/4”
(67mm x 248mm)
1.5 to 2.5 gpm
(6 to 10 lpm)
Materials of Construction
• Filter Media ..................Food Grade Polyphosphate • Gasket ................................Buna-N (PCC212 & 218)
• Shell ............................Polypropylene
• Temperature Rating ..........40°F to 100°F (4.4°C to 37.85°C)
• Post-filter ....................Polypropylene (PCC212 & 218)
CAUTION: Eye irritant. Contains sodium calcium hexametaphosphate. Avoid contact with eyes. In case of eye contact, flush with water for
15 minutes, get medical attention. Keep out of reach of children.
WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
NOTE: PCC212 and PCC218 cartridges are not recommended for main line water applications with flow rates exceeding 3.0 gpm (11.4
lpm).
NOTE: With steamers, the water should be flushed daily.
CAUTION: Do not use this cartridge on water that will be carbonated.
160
Hydrotech
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 161
RFFE20-BB Radial Flow Iron Reduction Cartridges
•
•
•
•
Easily and effectively reduces up to 3 ppm of dissolved iron from water.
Improves flavor and reduces the metallic taste caused by iron.
Reduces the possibility of pipe and water heater damage.
For use in 20-inch Big Blue® filter housings.
The RFFE20-BB cartridge is designed to provide an easy and effective method of
reducing iron from water, which greatly improves the taste.
This cartridge helps to eliminate the orange and brown stains often found in sinks,
toilets, tubs and other plumbing fixtures.
RFFE20-BB reduces the possibility of damage to pipes and water heaters and reduces
up to 3 ppm dissolved iron.
It adds no harmful chemicals to the water, making it completely safe for drinking water
applications.
The RFFE20-BB cartridge should be installed on the main cold water line after the
pressure tank or water meter. For best results, pre-sediment and post-carbon treatment
is recommended.
Approximate Life of System*
Iron Level
in Water
3 ppm
2 ppm
1 ppm
0.5 ppm
Total Gallons
Water Used
26,000 gal.
40,000 gal.
80,000 gal.
160,000 gal.
250 GPD
(4 People)
104 days
160 days
320 days
640 days
125 GPD
(2 People)
208 days
320 days
640 days
1280 days
75 GPD
(1 Person)
416 days
640 days
1280 days
N/A
*Test results were obtained by using the RFFE20-BB in combination with an RFC20-BB
cartridge.
Recommended Operating Conditions
Item #
15526303
Model
RFFE20-BB
pH
>7.0
Manganese
<1 ppm
Iron Bacteria
None
Silica
<100 ppm
Iron
<3 ppm
Hydrogen Sulfide
None
*Typical Iron Filtration System
• Approximate Cartridge Life ..........3 to 6 Months
(family of four)
• Maximum Operating Pressure** ..90 psi (6.2 bar)
• Maximum Water Temperature ....100°F (37.8°C)
• Inlet/Outlet Connections ............................1” (2.54 cm)
• Replacement Cartridges - Iron Filter..........RFFE20-BB
• Recommended Filter - |Sediment ..........R30 BB (two)
- Carbon ...................RFC20-BB
*When used in a BBFS-222 system
**CAUTION: If you suspect your water pressure will at any time exceed the maximum rating of 90 psi (6.2 bar), a
pressure regulator must be installed before the system. This will guard against the pressure exceeding the maximum
rating at any time. It is recommended that the pressure regulator be set at 75 psi (5.2 bar) or less.
NOTE: Water conditions outside of the above specified limits may lead to a shortened filtration life. If your water contains Iron Bacteria,
shock
chlorination is recommended.
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system.
CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
NOTE: The RFFE20-BB and RFC20-BB cartridges will contain a very small amount of fines (very fine powder) and new cartridges, after
installation, should be flushed with sufficient water to remove all traces of fines from your water system before use.
Hydrotech
161
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 162
PCF Series Mixed Bed Deionization Cartridges
• Designed for deionizing water up to 16 megohms.
• All materials and construction are FDA-compliant.
• Three sizes and capacities.
PCF Series cartridges have been developed in response to the requirements
for deionized water in many industries.
They have been manufactured using an FDA-compliant resin that has been
subjected to additional post-production steps to minimize the total organic
carbon (TOC) level.
BBF120MB
These high-capacity, semi-conductor grade resin cartridges are ideal for use
in pharmaceuticals, medical laboratories, cosmetics, and circuit board printing
applications.
PCF Series cartridges are available in three sizes, flow rates and capacities.
They are convenient and cost-effective for many applications where low levels
of total organic carbon (TOC) and total dissolved solids (TDS) levels are
required.
Applications:
• Circuit board printing • Pharmaceutical use • Steam and humidification
• Cosmetics • Steam processors • Humidification systems • Recirculating/
cooling towers • Power generating equipment • Medical/laboratory use
• Lasers • Jet water sprayers • Boiler make-up water
PCF110MB
Item #
15527303
Model
PCF1-10MB
15527403
PCF1-20MB
15528103
BBF1-20MB
Maximum
Dimensions
2-2/3” x 9-3/4”
(68 mm x 248 mm)
2-2/3” x 20”
(68 mm x 508 mm)
4-1/2” x 20”
(114mm x 508 mm)
Capacity Grains
(mg TDS as CaCO3)
270
(17,500)
600
(38,800)
1,850
(120,000)
Initial ∆P (psi)
@ Flow Rate (gpm)
1.5 psi @ 0.25 gpm
(0.1 bar @ 0.95 lpm)
3.4 psi @ 0.5 gpm
(0.23 bar @ 1.9 lpm)
1.1 psi @ 1.25 gpm)
(0.76 bar @ 4.7 lpm)
PCF120MB
Suggested
Flow Rate
0.25 gpm
(0.95 lpm)
.50 gpm
(1.9 lpm)
1.25 gpm
(4.7 lpm)
Materials of Construction
•
•
•
•
Filter Media ..................................Mixed Bed DI resins
End Caps ....................................Polypropylene
Shell ..............................................Polypropylene
Pre-filter ........................................Polypropylene
• Post Filter ..................Polypropylene
• Gaskets ......................Buna-N
• Temperature Rating ..40°F to 100°F (4.4°C to 37.8°C)
WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection or after the unit.
NOTE: The above resin data is based on information obtained by Pentek Filtration. This data does not imply any warranty or performance
guarantee. We recommend that the user determine performance by testing on his own processing equipment. We assume no liability or
responsibility for patent infringement resulting from the use of this product.
CAUTION: Do not use cartridges on equipment that has an electric conductivity water level indicator.
162
Hydrotech
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 163
Product Water Resistivity vs Gallons Through-put
Test Conditions
RO FEED WATER ............15 - 20 TDS
pH ......................................6.5 - 7.5
CITY FEED WATER ..........170 TDS
TEMPERATURE ................77 +/- 2°F
Cartridges
Flow Rate
(1) PCF-1-10MB ................0.25 GPM
(2) PCF1-20MB..................0.50 GPM
(3) BBF1-20MB..................1.25 GPM
(4) Two PCF1-20MB tested in a series @ 0.50
gpm
(5) PCF1-20MB with RO feed water @ 0.50
gpm
1 Microsiemen = 1 Microhms/cm
FDA Grade Resin
FUNCTION STRUCTURE
Cation ..............................................R-S03-H+
Anion ................AR-N(CH3)2(C2H4OH)+OHPHYSICAL FORM
IONIC FORM
PERCENT CONVERSION
Hydrogen ..............................99.9% Minimum
Hydroxide ................................95% Minimum
Applications:
•
•
•
•
•
•
•
•
•
•
•
•
•
Circuit Board Printing
Power Generating Equipment
Pharmaceutical Use
Medical/Laboratory Use
Steam and Humidification
Breeding Tanks
Cosmetics
Lasers
Steam Processors
Jet Water Sprayers
Humidification Systems
Boiler Make-up Water
Recirculating/Cooling Towers
CAUTION: Filter must be protected against freezing which can causing cracking of the filter and water damage. For drinking water applications, do not use with
water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Do not use cartridges on equipment that
has an electric conductivity water level indicator.
NOTE: The above resin data is based on information obtained by Pentek Filtration. These data are believed to be reliable but do not imply any warranty or
performance guarantee. We recommend that the user determine performance by testing on his own processing equipment. We assume no liability or responsibility for patent infringement resulting from the use of this product. The DI Resin cartridges are being designed for the following performance parameters.
Hydrotech
163
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 164
WS Series Water Softener Cartridges
•
•
•
•
Convenient cartridge change-out.
Manufactured with FDA grade softener resin.
750 to 4500 grain capacity available (grains as CaCO3).
For use in Slim Line®, Standard and Big Blue® filter housings.
WS-20BB
WS Series cartridges provide softened water in a convenient cartridgestyle design.
These cation exchange softening cartridges utilize a bed of sodium form
cation resin beads to reduce hardness and scale deposits.
The convenient and space-saving design of our WS Series cartridges
means that softened water can be provided easily and cost effectively at
the exact point of need.
WS Series cartridges are available in three different sizes and flow rates,
and have a rated capacity of 750, 1500 or 4500 grains (as CaCO3)
capacity.
WS-10
Item #
Model
Dimensions
15531903
WS-10
15532003
WS-20
15532103
WS-20BB
2- 5/8” x 9-3/4”
(6.7cm x 24.8cm)
2-5/8” x 20”
(6.7cm x 50.8cm)
4-1/2” x 20”
(11.4cm x 50.8cm)
WS-20
Recommended
Flow Rate
Capacity
(Grains as CaCo3)
.50 gpm (1.9 lpm)
750
.75 gpm (2.8 lpm)
1,500
2.0 gpm (8.5 lpm)
4,500
Materials of Construction
• Filter Media ............................Standard Softener Resin*
• End Caps ................................Polypropylene
• Pre-Filter ................................Polypropylene
• Post-Filter ..........................Polypropylene
• Gasket................................Buna-N
• Temperature Rating ..........100°F (37.7°C)
* Cation, sodium-form resin, 20 x 40 mesh, R-SO3-Na+
WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
164
Hydrotech
HY Catalog CDN 151-166 Pentek.qxp
5/27/2009
9:49 AM
Page 165
Freshpoint™ Ultrafiltration System
• Designed for cyst reduction, turbidity, and fine sediment filtration applications.
• > 98% reduction of 0.025 micron (25 nanometer) particles.*
• > 99.99% (> 4 Log) reduction of 0.065 micron (65 nanometer) particles.*
• Proprietary hollow-fiber ultrafiltration membrane.
• Professional-grade housing, controller and flush valve.
• Metered self-cleaning cycle flushes only when needed.
• Day override feature flushes module daily with fresh water when system is not in use.
• Peak flow rates up to 10 gpm (2271 L/h).
• Forward-flush and back-flush cleaning cycles provide extended filter life in a wide range of applications.
*Performance based on MS-2 (25 nm) and PRD-1 (65 nm) virus particle tests. Data available upon request.
The PENTEK® Freshpoint™ Ultrafiltration System provides complete point-of-entry (POE) filtration
proven to reduce turbidity, particulates and cysts for safer, cleaner water at every tap. The system
employs hollow-fiber Ultrafiltration membrane technology to filter impurities as small as 0.025
microns.
To maximize membrane capacity and service life, a metered flushing cycle is controlled using an
advanced controller and high-performance turbine meter. The self-cleaning forward and back-flush
cycles are initiated when the programmed capacity of the membrane is reached. During the
backwash, flow is reversed and particles are ejected from the pores of the membrane and flushed
to drain. In the forward- flush cycle, service water passes through the capillaries at a high speed,
scouring particles from the membrane surface and rinsing them from the system. Since power is only
required to flush the system, outages and interruptions will not jeopardize the integrity of membrane
or its ability to provide safer, cleaner water.
The advanced electronic controller provides a programmable day override which allows the unit to
flush every day with fresh water when the system is not in use. Critical system diagnostics, including
totalized flow, instantaneous flow rate, and previous days water usage, are available to optimize
flushing cycles and monitor performance.
The high-performance industrial fiberglass housing is pressure rated to 300 psi. Inside the housing,
the membrane is sealed with double radial o-rings, minimizing the potential for leak paths. Quickconnect end caps allow the membrane to easily be removed for cleaning or replacement.
The system can be applied to solve “known” water problems including high turbidity, suspended
solids, and certain microbiological contaminants. It can also serve as a flushable prefilter to extend
the life of media filters downstream.
Item #
33145
33146
61595-01
61667-11
61-667-12
Model
Freshpoint™ Ultrafiltration System (less controller)
Freshpoint™ Ultrafiltration System (c/w controller)
Freshpoint Filter Module Replacement
Freshpoint, Backwash Kit c/w ROMate40 Tank 120V
Freshpoint, Backwash Kit w/o Tank, 120V (Tank Req’d)
Materials of Construction
MEMBRANE
• Material ......................................Polyethersulfone,
modified (PESM)
• Pore Size ...................................0.025 micron (nominal)
0.065 micron (absolute)
• Molecular Weight Cut Off ........100-150 kD
(MWCO)
• Active Membrane Surface........51 sq. ft.
• Service Flow Rate ....................6.23 gpm to 10 gpm
@ 15 psi drop
(1,416 L/h to 2,271 L/h)
CONTROLLER
• Electrical Rating .......................50/60 Hz
• Forward Flush Cycle ................1-99 minutes
• Metered Volume ........................1-9999 gallons
• Meter Accuracy .........................1-50 gpm +/- 5%
SYSTEM
• Inlet/Outlet .................................3/4-inch NPT
This product is not certified as microbiological purifier and should not be applied as stand-alone disinfection solution for microbiologically
unsafe water.
Hydrotech
165
HY Catalog CDN 151-166 Pentek.qxp
Notes
166
Hydrotech
5/27/2009
9:49 AM
Page 166
Download PDF
Similar pages