IR Bullet IR Bullet Camera

IR Bullet
Camera
BC series
Installation
1.
2.
4. Regulated power to camera is necessary, otherwise
Be careful when handling the unit: Do not drop the
damage maybe caused to the camera. Connect power to
camera or subject it to strong shock or vibration.
power input. Turn on the power.
Install the camera in an appropriate environment,
environm
i.e. do
5. Adjust the lens and camera's setting for best image.
not expose an indoor camera to weather, rain etc. In any
case install away from humidity, dust and high
temperatures.
※ Do not install it where there is greasy smoke or steam,
where the moisture may get too high or where there is
a lot of dust.
odor (space) is emitted from the unit or if it seems not
※ Do not install close
ose to stoves or other heat generating
devices, such as spotlights etc. Avoid places where
there is direct sunlight.
functioning correctly. Disconnect the power cord
immediately and consult your dealer.
※ Do
o not adjust or modify the camera's internal circuits or
※ Install away from electric or magnetic fields. It may
power supply modules, as it may be dangerous and
interfere with or distort the image when installed close
cause damage to the unit. For internal settings and
to electric or magnetic fields (TV, speaker etc.). Fix the
repairing, consult your dealer.
camera to wall or ceiling by using appropriate screws.
Consider the weight of the camera.
※ Do not put objects inside the unit. Make sure that no
metal objects or flammable substances gets inside the
※ Avoid aiming the camera towards bright light sources,
that might damage the image sensor.
3.
Precaution
※ Do not use the camera if fumes, smokes or a strange
camera that may cause damage to the unit. If water or
liquid gets inside, disconnect the power cable
immediately and consult your dealer.
Connect video output to the video input of the monitor or
DVR.
※ When cleaning do not directly touch
touc
the sensor element.
If necessary use a soft cloth moistened with alcohol to
wipe off the dust.
Model
Singnal System
Pick Up Device
Picture Elment H*V
Resolution
Lens
LED
IRC
Min Illumination
Scanning System
Sync System
Electronic Shutter
OSD
BLC / HLC
ATR (WDR)
DNR
Video Output
Power Supply
Power Consumption
Storage Temperature
Operating Temperature
HSTHST-BC003
BC003
NTSC / PAL
1/3” HDIS
756H*504V
700TVL
3.6mm
24LED
Yes
0.001LUX
2:1 Interline
Inernal
NTSC: 1/60~1/100,000SEC / PAL: 1/50~1/100,000SEC
Yes
Yes
No
No
1.0Vp-p(75Ω BNC)
DC12V
Max. 4.0W
-30°C~+65°C
-10°C~+65°C
Download PDF
Similar pages