Technical Specification for ACR1281U-C1

ACR1281U-C1
USB Dual Interface Reader
Technical Specifications V1.08
Subject to change without prior notice
info@acs.com.hk
www.acs.com.hk
Table of Contents
1.0.
Introduction ............................................................................................................... 3
2.0.
Features ..................................................................................................................... 4
3.0.
Typical Applications ................................................................................................. 5
4.0.
Technical Specifications .......................................................................................... 6
Page 2 of 7
ACR1281U-C1 – Technical Specifications
Version 1.08
info@acs.com.hk
www.acs.com.hk
1.0. Introduction
ACR1281U-C1 DualBoost II is the second generation of
ACS’s ACR128 DualBoost Reader. It is a dual interface
reader that can access any contact and contactless smart
cards following the ISO 7816 and ISO 14443 standards.
ACR1281U-C1 enables one to conventionally integrate
separate and independent applications for contact and
contactless technologies into one device and one card.
The DualBoost Series is PC/SC-compliant for both contact
and contactless interfaces. It makes use of high-speed
communication for contactless cards at a maximum of 848
Kbps, which makes it suitable for highly demanding
applications. It also provides intelligent support for hybrid
and combi cards, such that it detects a contactless card even if it is inserted in the contact card slot.
Lastly, it has a built-in ISO 7816 (Class A) SAM slot, which can be used together with a SAM card, for
added security in both contact and contactless applications.
With additional features such as USB firmware upgradability, contact memory card support and
extended APDU support, the ACR1281U-C1 DualBoost II is an all-in-one, cost-effective and powerful
dual interface reader designed to provide you with great flexibility and convenience.
Page 3 of 7
ACR1281U-C1 – Technical Specifications
Version 1.08
info@acs.com.hk
www.acs.com.hk
2.0. Features
•
USB Full Speed Interface
•
CCID-compliant
•
Smart Card Reader:
o
Contactless Interface:
o
Read/Write speed of up to 848 Kbps
Built-in antenna for contactless tag access, with card reading distance of up to 50 mm
(depending on tag type)
 Supports ISO 14443 Part 4 Type A and B cards and MIFARE® Classic series
 Built-in anti-collision feature (only one tag is accessed at any time)
 Supports extended APDU (max. 64 KB)
Contact Interface:
o
 Supports ISO 7816 Class A, B, and C (5 V, 3 V and 1.8 V) cards
 Supports CAC (Common Access Card)
 Supports PIV (Personal Identity Verification Card)
 Supports microprocessor cards with T=0 or T=1 protocol
 Supports memory cards
 Supports PPS (Protocol and Parameters Selection)
 Features Short Circuit Protection
 Supports extended APDU (max. 64 KBytes for T=1; max. 512+10 Bytes for T=0)
SAM Interface:




•
•
•
Application Programming Interface:
o
Supports PC/SC
o
Supports CT-API (through wrapper on top of PC/SC)
Built-in Peripherals:
o
o
Two user-controllable LEDs
User-controllable buzzer
USB Firmware Upgradability
•
Supports Android™ 3.1 and later 1
•
Compliant with the following standards:
o
o
o
o
o
o
o
o
o
1
One SAM slot
Supports ISO 7816 Class A SAM cards
ISO 14443
ISO 7816
PC/SC
CCID
CE
FCC
RoHS 2
REACH
Microsoft® WHQL
Uses an ACS-defined Android Library
Page 4 of 7
ACR1281U-C1 – Technical Specifications
Version 1.08
info@acs.com.hk
www.acs.com.hk
3.0. Typical Applications
•
e-Government
•
e-Banking and e-Payment
•
e-Healthcare
•
Transportation
•
Network Security
•
Access Control
•
Loyalty Program
Page 5 of 7
ACR1281U-C1 – Technical Specifications
Version 1.08
info@acs.com.hk
www.acs.com.hk
4.0. Technical Specifications
Physical Characteristics
Dimensions .................................... 120.5 mm (L) × 72.0 mm (W) × 20.4 mm (H)
Weight ............................................ 140 g
Color .............................................. Black
USB Host Interface
Protocol .......................................... USB CCID
Connector Type.............................. Standard Type A
Power Source................................. From USB port
Speed ............................................. USB Full Speed (12 Mbps)
Supply Voltage ............................... 5 V
Supply Current .............................. Max. 200 mA
Cable Length .................................. 2.0 m, Fixed
Contactless Smart Card Interface
Standard ........................................ ISO 14443 A and B Parts 1-4
Protocol .......................................... ISO 14443 T=CL for ISO 14443-4–compliant cards
....................................................... T=CL Emulation for MIFARE Classic
Operating Frequency ..................... 13.56 MHz
Operating Distance ........................ Up to 50 mm (depending on tag type)
Smart Card Read/Write Speed....... 106 Kbps, 212 Kbps, 424 Kbps, 848 Kbps
Antenna Size .................................. 65 mm × 60 mm
Contact Smart Card Interface
Number of Slots ............................. 1 Full-sized Card Slot
Standard ........................................ ISO 7816, Class A, B, C (5 V, 3 V, 1.8 V)
Protocol .......................................... T=0; T=1; Memory Card Support
Supply Current ............................... Max. 60 mA
Smart Card Read/Write Speed....... 9.6 Kbps – 420 Kbps
Short Circuit Protection ................. (+5) V/GND on all pins
Clock Frequency ............................ 4.80 MHz
Card Connector .............................. ICC Slot: Landing
Card Insertion Cycles ..................... Min. 200,000
SAM Card Interface
Number of Slot ............................... 1 Standard SIM-sized Card Slot
Standard ........................................ ISO 7816, Class A (5 V)
Protocol .......................................... T=0; T=1
Card Connector Type ..................... SAM Slot 0: Contact
Built-in Peripherals
LED ................................................ 2 single-color: Red and Green
Buzzer ............................................ Monotone
Other Feature
Firmware Upgrade ......................... Supported
Page 6 of 7
ACR1281U-C1 – Technical Specifications
Version 1.08
info@acs.com.hk
www.acs.com.hk
Operating Conditions
Temperature .................................. 0 °C – 60 °C
Humidity ......................................... Max. 90% (non-condensing)
MTBF ............................................. 500,000 hrs
Application Programming Interface
PC-linked mode.............................. PC/SC
....................................................... CT-API (through wrapper on top of PC/SC)
Certifications/Compliance
ISO 7816, ISO 14443, USB Full Speed, PC/SC, CCID, CE, FCC, RoHS 2, REACH
Microsoft® WHQL
Device Driver Operating System Support
Windows® XP, Windows Vista®, Windows® 7, Windows® 8, Windows® 8.1, Windows® 10,
Windows® Server 2003, Windows® Server 2008, Windows® Server 2008 R2, Windows® Server 2012,
Windows® Server 2012 R2, Windows® Server 2016
Linux®, Mac OS®, Solaris, Android™ 3.1 and later
Android is a trademark of Google LLC.
Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
Mac OS is a trademark of Apple Inc.
Microsoft, Windows, and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries.
MIFARE and MIFARE Classic are registered trademarks of NXP B.V. and are used under license.
Page 7 of 7
ACR1281U-C1 – Technical Specifications
Version 1.08
info@acs.com.hk
www.acs.com.hk
Download PDF
Similar pages