V-ZUG Ltd
Range hood
DFPQSL
Operating instructions
Thank you for choosing to buy one of our products. Your appliance is made to
high standards and is easy to use. Nevertheless, please take the time to read
these operating instructions in order to familiarize yourself with the appliance
and get the best use out of it.
Please follow the safety precautions.
Modifications
Text, diagrams and data correspond to the technical standard of the appliance
at the time these operating instructions went to press. The right to make technical modifications for the purpose of the further development of the appliance
is reserved.
Validity
The product family (model number) corresponds to the first alphanumerics on
the identification plate. These operating instructions apply to:
Type
Product family
Size system
DFPQSL9
61007
90
DFPQSL6
61008
60
DFPQSL5
61009
55
Motor housing no.
H4.2608 (extraction standard)
H4.2606 (recirculation
standard, built-in hood)
H4.2607 (recirculation short,
built-in hood)
H4.2774 (extraction with
options connection)
Variations depending on the model are noted in the text.
© V-ZUG Ltd, CH-6301 Zug, 2014
2
Contents
1
Safety precautions
1.1 Symbols used .........................................................................................
1.2 General safety precautions ..................................................................
1.3 Before using for the first time ..............................................................
1.4 Correct use ..............................................................................................
1.5 Children in the home .............................................................................
1.6 Note on use .............................................................................................
5
5
6
6
6
7
7
2
Disposal
9
3
Your
3.1
3.2
3.3
3.4
3.5
3.6
appliance
Appliance description ............................................................................
Extraction model .....................................................................................
Recirculation model ...............................................................................
Equipment ................................................................................................
Construction ............................................................................................
Operating and display elements .........................................................
10
10
10
10
11
11
12
4
Operating the appliance
4.1 Using for the first time ...........................................................................
4.2 Operation .................................................................................................
4.3 Intensive level ..........................................................................................
4.4 After-running time ...................................................................................
4.5 Illumination ...............................................................................................
4.6 Saturation indicator ................................................................................
4.7 Wipe protection .......................................................................................
13
13
15
16
17
17
17
18
5
Care
5.1
5.2
5.3
5.4
19
19
20
22
24
and maintenance
Cleaning the housing ............................................................................
Cleaning the grease filters and combi filters ....................................
Replacing the activated charcoal filters .............................................
Replacing the LEDs ...............................................................................
3
6
Trouble-shooting
25
7
Accessories and spare parts
26
8
Technical data
27
9
Notes
28
10 Index
29
11 Repair service
31
4
1
Safety precautions
1.1
Symbols used
Denotes important safety precautions.
Failure to observe said precautions can result in injury or in
damage to the appliance or fittings!
Information and precautions that should be observed.
Information on disposal
Information about the operating instructions
Indicates step-by-step instructions.
– Describes how the appliance reacts to the steps taken.
• Indicates a list.
5
1 Safety precautions
1.2
General safety precautions
The appliance corresponds to recognized technology standards and
the relevant safety regulations. However, proper use of the appliance is essential to avoid damage and accidents. Please therefore
follow the precautions given in these operating instructions.
In accordance with the requirements of IEC 60335-1:
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless supervised or unless they have been given instruction
concerning the use of the appliance by a person responsible for their
safety.
1.3
Before using for the first time
• The appliance must be installed and connected to the electricity supply in
accordance with the separate installation instructions. Have a qualified fitter/
electrician carry out the necessary work.
• Dispose of the packaging material in accordance with local regulations.
1.4
Correct use
• The appliance is designed for use in the home for extracting cooking
odours from above a cooking area.
• Any repairs, modifications or manipulations to the appliance, especially any
electrically live parts, may only be carried out by the manufacturer, its
Customer Services or a similarly qualified person. Repairs if carried out
incorrectly could cause serious injury or damage to the appliance and
fittings as well as affect the functioning of the appliance. If the appliance is
not working properly or in case of a repair order, follow the instructions
given in the 'Repair service' section. If necessary, please contact our
Customer Services.
• Use original spare parts only.
• Retain these operating instructions for future reference. If you sell the appliance or pass it on to a third party, please ensure these operating instructions accompany the appliance, together with the instructions on installation.
In this way, the new owner can inform themselves about how to use the
appliance correctly and read the pertinent safety precautions.
6
1 Safety precautions
1.5
Children in the home
• Packaging material, e.g. plastic film and polystyrene, can be dangerous for
children. Danger of suffocation! Keep packaging material away from children.
• The appliance is designed for use by adults who are familiar with these
operating instructions. Children are often unable to recognize the danger of
electrical appliances. Ensure proper supervision and do not allow children
to play with the appliance – there is a danger that children could hurt themselves.
1.6
Note on use
• If the appliance is visibly damaged, do not use it. Contact Customer Services.
• If the appliance is not operating properly, disconnect it from the power
supply immediately.
• If the mains cable of the appliance is damaged, it must be replaced by
Customer Services in order to avoid hazard.
• Caution: Accessible parts may become hot when used with cooking appliances.
• Do not flambé food underneath the appliance. Grease filters if laden with
grease could catch fire.
• If frying on the cooking surface, do not leave the frying appliance unattended. The cooking oil in the frying appliance could overheat and catch
fire. Constantly monitor the temperature of the cooking oil, keeping it below
the temperature at which it can catch fire. Change the cooking oil regularly
– dirty oil catches fire more easily than clean oil.
• Observe the cleaning intervals. Failure to do so can increase the fire hazard
due to the excessive build-up of grease in the grease filters.
• Do not operate the individual cooking zones of the cooking surface without
a pan on them or with an empty pan on them so as to avoid damaging the
appliance or the kitchen fittings through a build-up of heat. Avoid open fires
with oil, gas, wood and coal fired cookers.
• Ensure there is adequate ventilation when the extraction fan is on so as to
avoid creating a disturbing underpressure in the kitchen and to achieve
optimal air extraction.
7
1 Safety precautions
• Avoid a cross-current of air, which could blow the cooking vapours across
the cooking area.
• If other appliances – fuelled by gas or other fuels – are being used at the
same time, ensure that there is a sufficient supply of fresh air. This does not
apply to air recirculation appliances.
• If other firing systems are being used at the same time (e.g. wood, gas, oil
or coal-fired heating appliances), safe operation is only possible providing a
room negative pressure of 4 Pa (0.04mbar) is not exceeded at the location
of the appliance. Risk of toxic fumes! An adequate flow of fresh air must be
guaranteed e.g. via non-closable openings in doors or windows and in
combination with an air-intake/exhaust-air wall box or by other technical
means.
• When carrying out maintenance work on the appliance, including replacing
the light bulb, cut off the electricity supply to the appliance (remove the
screw fuse from the holder or switch the circuit breaker off, or disconnect
from the mains supply).
• When cleaning the appliance make sure no water gets inside the appliance.
Use a moderately damp cloth. Do not spray the inside or outside of the
appliance with water. Do not use a steam cleaner. If water gets inside the
appliance, it can cause damage.
8
2
Disposal
Packaging
• All packaging materials (cardboard, plastic film (PE) and polystyrene (EPS))
are marked and should, if possible, be collected for recycling and disposed
of in an environmentally friendly way.
Disconnection
• Disconnect the appliance from the mains. With a fixed appliance, this is to
be carried out by a qualified electrician!
Safety
• Disable the appliance to prevent accidents caused by improper use, especially through children playing.
• Pull the plug out of the mains socket or have the appliance disconnected
from the mains by an electrician. Then cut the mains cable off flush with the
appliance.
• Remove or disable the lock on the appliance door.
Disposal
• The old appliance should not be discarded as worthless rubbish. If
disposed of correctly, the raw materials can be recovered for recycling.
• The
symbol on the identification plate warns that the appliance may not
be disposed of in normal household waste.
• The appliance must be disposed of in accordance with local regulations on
waste disposal. For more information on the handling, disposal and recycling of the product, please contact the local authorities, the local recycling
facilities for household waste or the retailer from whom you purchased the
appliance.
9
3
Your appliance
3.1
Appliance description
The appliance is designed for use in the home for extracting cooking odours
from above a cooking area.
This particular model can be used to air extract or recirculate air.
3.2
Extraction model
The integrated fan extracts cooking fumes and smells from above the cooking
surface. The metal grease filters clean the air, which is ducted outside.
When in use, ensure there is a sufficient supply of fresh air. Exhaust air
requires intake air.
The saturation indicator for the activated charcoal filter must be deactivated. [➙ see page 13]
3.3
Recirculation model
The cooking fumes and smells above the cooking area are filtered through the
metal grease filters and then passed through an activated charcoal filter. The
filtered air is then circulated back into the room.
10
3 Your appliance
3.4
•
•
•
•
•
•
•
•
•
•
•
•
Equipment
1 extractor fan with 4 power levels:
1 = low, 2 = medium, 3 = high, and intensive level.
Power levels 1–3 are suitable for continuous operation.
The intensive level is used for short bursts of intensive extraction of cooking
fumes and smells, e.g. when searing meat. The intensive level runs for 5
minutes.
Illumination
1 or 2 combi filters (depending on hood size)
1 or 2 grease filters (depending on hood size)
2 activated charcoal filters A (recirculation model only)
1 or 3 activated charcoal filters B (recirculation model only)
2, 3 or 4 grease filters (depending on hood size)
2 activated charcoal filters A (recirculation model only)
1 or 3 activated charcoal filters B (recirculation model only)
3.5
Construction
1
2
3
4
1 Operating elements
2 Combi filter
3 Grease filter
4 Illumination
11
3 Your appliance
3.6
Operating and display elements
Buttons
ON/OFF button
Power level selection
Illumination ON/OFF
Timer
Displays
Power level 1
Power level 2
Power level 3
• Flashing:
Intensive level
Wipe protection
• Illuminated:
Wipe protection activated
Timer
• Illuminated:
Timer activated
Saturation indicator for grease filters
• Flashing:
Clean grease filters
Saturation indicator for activated charcoal filters
• Flashing:
Replace activated charcoal filters
Depending on the model and features, the specification of the appliance may differ from the standard specification described herein.
12
4
Operating the appliance
4.1
Using for the first time
Configuring the appliance
The appliance can be used in the extraction or recirculation mode. The appliance is set up as a recirculation hood with 5 kg of activated charcoal exfactory. With this setting, the service life of the activated charcoal filter is 1,200
operating hours. The operating hours counter must be configured for the
version of the range hood with 2.5 kg of activated charcoal. The saturation
indicator can also be adjusted to your cooking habits.
If the appliance is to be used as an extraction model, the saturation
indicator for the activated charcoal filter must be deactivated.
Amount of activated charcoal used
Remove the grease filters and combi
filters (see Cleaning the grease filter
and combi filter [➙ see page 20]).
– For the length of the motor
housing, see on the inside (see
arrow).
Short motor housing = 2.5 kg activated charcoal
Long motor housing = 5 kg activated charcoal
13
4 Operating the appliance
Activating and changing the saturation indicator for the activated charcoal
filter
Switch the appliance off.
Depress the
– The
button for 3 seconds.
and displays flash.
Press the
button repeatedly until the desired setting illuminates in the
display.
– The setting selected will be automatically accepted after 5 seconds.
The range hood is now set up as a recirculation model.
Settings options for the saturation indicator
Amount of
activated
charcoal
Cooking intensity
Operating
hours
5 kg
Standard, for not overly frequent
and/or pungent cooking
1200 h
5 kg
For more frequent and/or more
pungent cooking
700 h
2.5 kg
Standard, for not overly frequent
and/or pungent cooking
700 h
2.5 kg
For more frequent and/or more
pungent cooking
400 h
Power level
display
If the appliance is to be used as an extraction model, the hours counter for the
activated charcoal filters must be deactivated.
Deactivating the saturation indicator for the activated charcoal filters
Switch the appliance off.
Depress the
– The
and
Depress the
button for 3 seconds.
displays flash.
button again for 3 seconds.
– The
and
displays go out.
The range hood is now set up as an extraction model.
14
4 Operating the appliance
Checking the settings
Switch off the appliance.
Depress the
button for 3 seconds.
– If the
and buttons flash, the appliance is configured as an extraction
model.
– If the
and
buttons flash, the appliance is configured as a
recirculation model.
No steps have to be taken to exit the checking of the settings as the display
switches off automatically.
4.2
Operation
Switching the appliance on
Pull out the flat deflector plate.
The appliance is most effective when the flat deflector plate is fully
pulled out.
Press the
button.
– The appliance switches on at power level 1.
Press the
button repeatedly until the desired power level is reached.
– The current power level illuminates in the corresponding display.
– The
display flashes when the intensive level is selected.
Alternatively, the next higher power level can be set using the flat deflector
plate:
With the appliance switched on, push the flat deflector plate completely in
and then pull out again within 2 seconds.
– The next higher power level is selected.
This procedure can be repeated up to the intensive level. If this is repeated
again the appliance switches back to power level 1.
We recommend switching the appliance on at power level 1 some 5
minutes before cooking. Use a low power level for normal cooking
smells and a higher power level for very strong cooking fumes and
smells.
15
4 Operating the appliance
The appliance has a memory function: the next time the appliance is
used, if the flat deflector plate is pulled out then the appliance switches
on at the power level last used.
Switching the appliance off
Press the
button or push the flat deflector plate in.
After finishing cooking, allow the appliance to run for another 15
minutes so that the cooking fumes and smells can be extracted.
4.3
Intensive level
The intensive level can be selected when the appliance is switched on.
Depress the
button for 2 seconds.
– The
display flashes.
After 5 minutes, the appliance switches back to the previously selected power
level.
Press the
button to stop the intensive level before the 5 minutes has
elapsed.
– The appliance switches back to the previously selected power level.
16
4 Operating the appliance
4.4
After-running time
Switch the appliance on.
Press the
button to select the desired power level.
Press the
button to activate the after-running time function.
With the after-running time function, the appliance keeps running according to
the following table and then switches off automatically.
Button
After-running time
20 minutes
15 minutes
10 minutes
Flashing
4.5
5 minutes
Illumination
Press the
button to switch the illumination on.
Repeatedly press the
button to switch the illumination off.
In order to switch the illumination on the flat deflector plate must be
pulled out.
4.6
Saturation indicator
Saturation indicator for the grease filters
The
display flashes after 20 operating hours. The saturation level has been
reached and the grease filters must be cleaned.
Saturation indicator for the activated charcoal filters
The
display illuminates after 1,200, 700 or 400 operating hours, depending
on the setting selected. The saturation level has been reached and the activated charcoal filters must be replaced.
17
4 Operating the appliance
4.7
Wipe protection
This function prevents the range hood from being switched on accidentally
while cleaning.
The range hood must be switched off.
Depress the
button for 5 seconds.
–
illuminates in the display.
– The wipe protection switches off automatically after 30 seconds and the
display goes out.
18
5
Care and maintenance
5.1
Cleaning the housing
Take care that no water gets into the housing! If water gets into the
housing, it can cause damage.
Do not use abrasive cleaners, scouring pads, steel wool etc. to
clean the appliance as they can damage the surface.
Remove the screw fuse or switch off the circuit breaker
Cleaning the outside/inside
Clean the outside using a slightly damp cloth – and detergent if necessary
– and wipe dry.
Grease and condensate water can build up around the grease filter on the
inside.
Clean using a slightly damp cloth – and detergent if necessary – and wipe
dry.
19
5 Care and maintenance
5.2
Cleaning the grease filters and combi filters
The grease filters must be cleaned at least once a month with normal use or
whenever the
button flashes. If cleaned monthly, the service life of the
grease filter is as long as that of the range hood.
The saturation indicator becomes visible when the appliance is in operation or a power level is activated.
Removing the grease filters and combi filters
Pull the flat deflector plate completely out and switch the appliance off.
Fold down the grip 2 on the grease filter 1.
90 cm model:
Carefully take the holder with both
grease filters down and out.
Take both grease filters out of the
holder.
4
3
1
2
55 cm / 60 cm model:
Carefully take the grease filter 1 down and out.
Fold down the grip 4 on the combi filter 3.
Carefully pull the combi filter 3 down and out of the holder.
Do not damage the grease filter.
20
5 Care and maintenance
Cleaning
Clean the grease filters and combi filters on their own in an upright position
in a dishwasher.
Set the dishwasher to an «intensive» – or «heavy» soiling – wash
programme.
Cleaning may cause the grease filters to become discoloured. This will
not affect the functioning of the filters in any way.
If no dishwasher is available:
Clean the grease filters and combi filters with hot water and detergent.
Then soak the filters in hot water and detergent in the sink for about 2 hours
and finally clean with a washing-up brush.
Do not damage the metal mesh of the combi filters.
Installing the grease filter and combi filters
Insert the combi filter in the flat deflector plate into the slots.
Fold down the grip.
Swing the combi filter up and engage in position.
90 cm model:
Insert the grease filters into the
holder.
Insert the holder into the slots at the
back and raise and engage in position at the front.
55 cm / 60 cm model:
Insert the grease filters into the slots
at the side.
Fold down the grip.
Swing the grease filters up and engage in position.
With the appliance switched off, depress the
reset the saturation indicator.
– The
button for 5 seconds to
button stops flashing.
21
5 Care and maintenance
5.3
Replacing the activated charcoal filters
Activated charcoal filters cannot be washed or regenerated.
Activated charcoal filters are only used in in the recirculation model.
An activated charcoal filter becomes less effective with use. A range hood can
contain 5 kg or 2.5 kg of activated charcoal, depending on the appliance
model. With normal use, the activated charcoal filters have to be replaced at
least every 5 years (for 5 kg) or 3 years (for 2.5 kg) or whenever the
illuminates.
button
The saturation indicator becomes visible when the appliance is in operation or a power level is activated.
Spent activated charcoal filters can be disposed of in the household
waste.
The activated charcoal filters have been developed especially for this appliance and can only be ordered from V-ZUG Ltd's Customer Services.
The activated charcoal filter consists of:
Activated charcoal filter A
22
Activated charcoal filter B
5 Care and maintenance
Removing the activated charcoal filters
Disconnect the appliance from the mains power supply.
Cover over the hob to protect it from getting damaged.
Remove and clean the grease filters.
If appropriate, remove flue casing following the manufacturer's instructions.
Press the metal cover C upwards and at the same time press both filter
holders outwards.
– The metal cover comes free, but cannot be completely removed.
C
Loosen the 6 screws in the front cover D and remove the cover.
D
Lift the activated charcoal filters A and B, one after the other, from the front
and pull out.
A
1
2
3
B
4
Detach the activated charcoal filter A from the metal holder E.
23
5 Care and maintenance
E
A
Clean [➙ see page 21] the metal holder E in a dishwasher or by hand.
Inserting the activated charcoal filters
Insert the activated charcoal filter B from the front and lay straight in the
filter holder.
If appropriate, lay further activated charcoal filters B on top of the first activated charcoal filter.
Attach activated charcoal filter A to the metal holder E.
Position metal holder E on topmost activated charcoal filter B.
– The activated charcoal filters A are located in the side panels.
Press the metal cover C upwards and engage in position.
Screw on front cover D.
If appropriate, put back flue casing.
Connect the appliance to the mains power supply.
With the appliance switched off, depress the
reset the saturation indicator.
– The flashing button goes out.
5.4
button for 5 seconds to
Replacing the LEDs
For safety reasons, the LEDs must be replaced by our Customer Services.
24
6
Trouble-shooting
What to do if …
… the illumination is not working
Possible cause
Solution
• Fuse or automatic circuit
breaker for electrical
installations in the home
is defective.
Replace the fuse.
Reset the automatic circuit breaker.
• An interruption in the
power supply.
Check the power supply.
• LED is defective.
Inform Customer Services.
… the appliance is not extracting enough air
Possible cause
Solution
• The grease filters are
dirty.
Clean the grease filters.
• The activated charcoal
filters (in models with
recirculation mode) are
saturated.
Replace the activated charcoal filters.
• Only for recirculation
model: The fresh air
intake is insufficient.
Ensure the fresh air intake is sufficient.
25
7
Accessories and spare parts
Please give product family of the appliance and exact description of the
accessory or spare part when ordering parts.*
Grease filter
Grease filter holder for 90 cm
hood width
Combi filter
Activated charcoal filter
+
* When ordering the activated charcoal filter give the length of the motor
housing [➙ see page 13].
26
8
Technical data
Electrical connection
See identification plate.
Remove the grease filters.
– The identification plate is located on the inside of the appliance.
27
9
28
Notes
10
Index
A
I
Accessories ..................................... 26
Activated charcoal ......................... 13
Activated charcoal filter ................. 10
Replacing ................................... 23
Saturation indicator ........... 14, 17
After-running time ........................... 17
Amount of activated charcoal used
...................................................... 13
Appliance description .................... 10
Identification plate ..........................27
Illumination ................................ 11, 17
Intensive level .................................. 16
C
Care .................................................. 19
Children in the home ........................7
Cleaning
Grease filter ...............................20
Housing ......................................19
Configuring the appliance ............ 13
Construction .................................... 11
D
Disconnection ....................................9
Display elements ............................ 12
Disposal ..............................................9
E
Electrical connection ..................... 27
Equipment ........................................ 11
Extraction model ............................. 10
G
L
LED
Replacing ...................................24
M
Malfunction
The illumination is not working
................................................25
Model no. ............................................2
O
Operating elements ................11, 12
Operating the appliance ...............13
P
Packaging ...........................................9
Product family ....................................2
Q
Queries ............................................. 31
Quick instructions ........................... 32
R
Recirculation model ....................... 10
Repair service ................................. 31
Grease filter
Cleaning ..................................... 20
Installing ..................................... 21
Removing ...................................20
Saturation indicator ..................17
29
10 Index
S
T
Safety ...................................................9
Safety precautions
Before using for the first time ....6
Children in the home ..................7
Correct use ...................................6
Note on use ..................................7
Saturation indicator
Activated charcoal filter .... 14, 17
Grease filter ...............................17
Settings options ........................14
Service agreement ......................... 31
Spare parts ...................................... 26
Switching off .................................... 16
Switching on .................................... 15
Symbols ..............................................5
Technical data ................................. 27
Type .....................................................2
30
U
Using for the first time ......................6
V
Validity .................................................2
W
What to do if
The appliance is not extracting
enough air ............................25
Wipe protection ............................... 18
11
Repair service
The «Trouble-shooting» section gives you valuable tips on how to
correct minor functions yourself, saving you the time and trouble of
calling out a service technician and the cost that goes along with it.
Register your V-ZUG appliance today online via our website at vzug.ch or
using the card supplied and benefit from the best possible support in the
event of a malfunction – including during the manufacturer's 2-year warranty
period. You need the serial number (FN) and designation of the appliance to
register. You can also note them down here or on the service sticker which
comes with the appliance:
FN _______________________
Appliance _______________________
Please have these details to hand when contacting V-ZUG in connection with a
malfunction. You will find them on the identification plate of your appliance.
Remove metal grease filter.
– The identification plate is located on the inside of the appliance.
Your repair order
Call the free service number 0800 850 850 to contact your nearest V-ZUG
service centre. You can arrange an onsite visit by us by phone if you wish.
General queries, accessories and service agreement
V-ZUG will be happy to help you with any general administrative or technical
queries, to accept your orders for accessories and spare parts and to inform
you about our progressive service agreements. You can contact us by calling
Tel. 058 767 67 67 or by going to our website at vzug.com.
31
Quick instructions
Please first read the safety precautions in the operating instructions!
Buttons
ON/OFF button
Power level selection
Illumination ON/OFF
Timer
Displays
Power level 1
Power level 2
Power level 3
• Flashing:
Intensive level
Wipe protection
• Illuminated:
Wipe protection activated
Timer
• Illuminated:
Timer activated
Saturation indicator for grease filters
• Flashing:
Clean grease filters
Saturation indicator for activated charcoal filters
• Flashing:
Replace activated charcoal filters
V-ZUG Ltd
Industriestrasse 66, 6301 Zug
Tel. +41 58 767 67 67, Fax +41 58 767 61 61
info@vzug.ch, www.vzug.com
Service Centre: Tel. 0800 850 850
J61007.013-2
Download PDF
Similar pages