KM 611x_en-AU - Winning Appliances

Operating and installation instructions
Ceramic cooktops with induction
To prevent the risk of accidents or damage to the appliance, it is
essential to read these instructions before it is installed and used for
the first time.
en-AU, NZ
M.-Nr. 07 839 980
Contents
Warning and Safety instructions.......................................................................... 4
Caring for the environment ................................................................................ 14
Overview............................................................................................................... 15
Cooktop................................................................................................................. 15
KM 6113 ........................................................................................................... 15
KM 6112 / KM 6115 / KM 6116........................................................................ 16
KM 6117 ........................................................................................................... 17
KM 6118 ........................................................................................................... 18
Controls / Indicators.............................................................................................. 19
Cooking zone data ................................................................................................ 21
Before using for the first time ............................................................................ 23
Cleaning the cooktop for the first time.................................................................. 23
Switching on the cooktop for the first time ........................................................... 23
Induction .............................................................................................................. 24
The induction principle .......................................................................................... 24
Noises.................................................................................................................... 25
Pans....................................................................................................................... 26
Tips on saving energy ........................................................................................ 27
Power level range ................................................................................................ 28
Operation.............................................................................................................. 29
Operating principles .............................................................................................. 29
Switching on.......................................................................................................... 30
Selecting/Changing the power setting .................................................................. 30
Switching off.......................................................................................................... 30
Residual heat indicator.......................................................................................... 30
Auto heat-up ......................................................................................................... 31
Booster .................................................................................................................. 32
Keeping warm ....................................................................................................... 34
Timer..................................................................................................................... 35
Minute minder ....................................................................................................... 35
Switching a cooking zone off automatically.......................................................... 36
Using both timer functions at the same time ........................................................ 37
Safety features..................................................................................................... 38
Safety lock / System lock...................................................................................... 38
Power management .............................................................................................. 39
Safety switch-off ................................................................................................... 39
2
Contents
Overheating protection.......................................................................................... 40
Cleaning and care ............................................................................................... 41
Programming ....................................................................................................... 43
Reset ..................................................................................................................... 46
Problem solving guide ........................................................................................ 47
Optional accessories .......................................................................................... 51
Safety instructions for installation..................................................................... 52
Safety distances .................................................................................................. 53
Installation notes ................................................................................................. 55
Building-in dimensions ....................................................................................... 56
KM 6112 ................................................................................................................ 56
KM 6113 ................................................................................................................ 57
KM 6115 ................................................................................................................ 58
KM 6116 ................................................................................................................ 59
KM 6117 ................................................................................................................ 60
KM 6118 ................................................................................................................ 61
Installation............................................................................................................ 62
Electrical connection .......................................................................................... 63
Service.................................................................................................................. 65
Contact in case of fault ......................................................................................... 65
Data plate: ............................................................................................................. 65
Warranty ................................................................................................................ 65
3
Warning and Safety instructions
This appliance conforms to current safety requirements.
Inappropriate use can, however, lead to personal injury and
damage to property.
To avoid the risk of accidents and damage to the appliance,
please read these instructions carefully before using it for the first
time. They contain important notes on installation, safety, use and
maintenance.
Miele cannot be held liable for non-compliance with these
instructions.
Keep these instructions in a safe place and ensure that new users
are familiar with the contents. Pass them on to any future owner.
4
Warning and Safety instructions
Correct application
 This cooktop is designed for domestic use and for use in similar
environments by guests in hotel or motel rooms, bed & breakfasts
and other typical living quarters. This does not include common/
shared facilities or commercial facilities within hotels, motels or bed
& breakfasts.
 This cooktop is not suitable for outdoor use.
 It is intended only to cook food and keep it warm. Any other use is
not supported by Miele and could be dangerous.
 This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning its use by a person responsible
for their safety, and are able to recognise the dangers of misuse.
5
Warning and Safety instructions
Safety with children
 Young children must not be allowed to use this appliance.
 Older children may only use the appliance when its operation has
been clearly explained to them and they are able to use it safely,
recognising the dangers of misuse.
 Cleaning may only be carried out by older children under the
supervision of an adult.
 Please supervise children in the vicinity of the cooktop and do not
let them play with it.
 The cooktop gets hot when in use and remains hot for a while
after being switched off. Keep children well away from the cooktop
until it has cooled down and there is no danger of burning.
 Danger of burning!
Do not store anything which might arouse a child's interest in
storage areas above or next to the cooktop. Otherwise they could be
tempted into climbing onto the appliance.
 Danger of burning or scalding!
Place pots and pans on the cooking zone in such a way that children
cannot pull them down and burn themselves.
 Danger of suffocation! Children may be able to wrap themselves in
packing material or pull it over their head with the risk of suffocation.
Keep children away from any packing material.
 Activate the system lock to ensure that children cannot switch on
the cooktop inadvertently. Use the safety lock when the cooktop is in
use to prevent children from altering the settings selected.
6
Warning and Safety instructions
Technical safety
 Repairs and other work by unqualified persons could be
dangerous. Installation, maintenance work and repairs to electrical
appliances must only be carried out by a Miele approved service
technician.
 A damaged appliance is dangerous. Check it for any visible
damage. Never install or attempt to use a damaged appliance.
 Reliable and safe operation of this cooktop can only be assured if
it has been connected to the mains electricity supply.
 The electrical safety of this appliance can only be guaranteed
when continuity is complete between it and an effective earthing
system which complies with local and national safety regulations. It
is most important that this basic safety requirement is present and
tested regularly and, where there is any doubt, the household wiring
system should be inspected by a qualified electrician.
 Before connecting the appliance to the mains supply, ensure that
the connection data on the data plate (voltage and frequency)
matches the mains electricity supply. This data must correspond in
order to avoid the risk of damage to the appliance.
 Do not connect the cooktop to the mains electrical supply by a
multi-socket adapter or extension lead. These are a fire hazard and
do not guarantee the required safety of the appliance.
 For safety reasons, this cooktop may only be used after it has
been built in.
 This appliance must not be installed and operated in mobile
installations (e.g. on a ship).
 Never open the casing of the cooktop.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.
7
Warning and Safety instructions
 The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.
 Faulty components must only be replaced by genuine Miele spare
parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.
 The cooktop is not intended for use with an external timer switch
or a remote control system.
 The cooktop must be connected to the electricity supply by a
qualified electrician (see "Electrical connection").
 If the mains connection cable is damaged, it must be replaced
with a special connection cable type H 05 VV-F (PVC insulated),
available from Miele, by a Miele approved service technician or
suitably qualified electrician in order to avoid a hazard. See
"Electrical connection".
 During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:
– the mains circuit breaker is switched off, or
– it is switched off at the wall socket and the plug is withdrawn from
the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.
 Danger of electric shock!
Do not use the cooktop if it is faulty, or if the ceramic surface is
cracked, chipped or damaged in any way. Switch it off immediately,
disconnect it from the mains electricity supply and contact Miele.
8
Warning and Safety instructions
 If the cooktop is installed behind a furniture panel (e.g. a door),
ensure that the door is never closed whilst the cooktop is in use.
Heat and moisture can build up behind a closed furniture panel and
cause subsequent damage to the cooktop, the housing unit and the
floor. Do not close the door until the residual heat indicators have
gone out.
 In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the appliance and
its surroundings clean at all times. Any damage caused by
cockroaches or other vermin will not be covered by the warranty.
 DO NOT MODIFY THIS APPLIANCE.
9
Warning and Safety instructions
Correct use
 The cooktop gets hot when in use and remains hot for a while
after being switched off. There is a danger of burning until the
residual heat indicators go out.
 Oil and fat can overheat and catch fire. Do not leave the cooktop
unattended when cooking with oil and fat. If it does ignite, do not
attempt to put the flames out with water.
Switch off the cooktop and use a suitable fire blanket, saucepan lid,
damp towel or similar to smother the flames.
 Flames could set the grease filters of a rangehood on fire. Do not
flambé under a rangehood.
 Spray canisters, aerosols and other inflammable substances can
ignite when heated. Therefore do not store such items or substances
in a drawer under the cooktop. Cutlery inserts must be heatresistant.
 Do not heat an empty pan.
 Do not heat up food in closed containers e.g. tins or sealed jars
on the cooktop, as pressure can build up in the containers, causing
them to explode.
 Do not cover the cooktop, e.g. with a cooktop cover, a cloth or
protective foil. The material could catch fire, shatter or melt if the
cooktop is switched on by mistake or if residual heat is still present.
 When the appliance is switched on either deliberately or by
mistake, or when there is residual heat present, there is the risk of
any metal items left on the cooktop heating up, with the danger of
burning. Depending on the material, other items left on the cooktop
could also melt or catch fire. Damp pan lids might adhere to the
ceramic surface and be difficult to dislodge. Do not use the
appliance as a resting place. Switch the cooking zones off after use
and do not rely on the pan detector.
10
Warning and Safety instructions
 You could burn yourself on the hot cooktop. Protect your hands
with heat-resistant pot holders or gloves when handling hot pots and
pans. Do not let them get wet or damp, as this causes heat to
transfer through the material more quickly with the risk of scalding or
burning yourself.
 When using an electrical appliance, e.g. a hand-held food mixer,
near the cooktop, ensure that the cable of the electrical appliance
cannot come into contact with the hot cooktop. The insulation on the
cable could become damaged.
 Grains of salt, sugar and sand (e.g. from cleaning vegetables) can
cause scratches if they get under pan bases. Make sure that the
ceramic surface is clean before placing pans on it.
 Even a light object can cause damage in certain circumstances.
Do not drop anything on the ceramic surface.
 Placing hot pans on the sensors and indicators could damage the
electronics underneath. Do not place hot pans on the sensors or
indicators.
 Do not allow solid or liquid sugar, or pieces of plastic or aluminium
foil to get onto the cooking zones when they are hot, as they can
damage the ceramic surface when it cools down. If this should
occur, switch off the appliance and scrape off all the sugar, plastic or
aluminium residues whilst still hot, using a shielded scraper blade.
Wear oven gloves. Allow the cooking zones to cool down and clean
them with a suitable ceramic cooktop cleaning agent.
 Pans which boil dry can cause damage to the ceramic glass. Do
not leave the cooktop unattended whilst it is being used.
 Only use pots and pans with smooth bases. Rough bases will
scratch the ceramic glass.
 Lift pans into position on the cooktop. Sliding them into place can
cause scuffs and scratches.
11
Warning and Safety instructions
 Induction heating works extremely quickly. Therefore, the base of
the pan could heat up to the temperature at which oil or fat selfignites within a very short time. Do not leave the cooktop unattended
whilst it is being used.
 Heat oil or fat for a maximum of one minute. Do not use the
Booster function to heat oil or fat.
 For people fitted with a heart pacemaker: Please note that the
area immediately surrounding the cooktop is electromagnetically
charged. It is very unlikely to affect a pacemaker. However, if in any
doubt, consult the manufacturer of the pacemaker or your doctor.
 To prevent damage to items which are susceptible to
electromagnetic fields, e.g. credit cards, digital storage devices,
pocket calculators, etc., do not leave them in the immediate vicinity
of the cooktop.
 Metal utensils stored in a drawer under the cooktop can become
hot if the appliance is used intensively for a long time. Do not store
any metal items or utensils in a drawer under the cooktop.
 This cooktop is fitted with a cooling fan. If a drawer is fitted
directly underneath the cooktop, ensure that there is sufficient space
between the drawer and its contents and the underside of the
appliance in order to ensure sufficient ventilation of the cooktop. Do
not store pointed or small items or paper in the drawer. They could
get in through the ventilation slots or be sucked into the housing by
the fan and damage the fan or impair cooling.
 Do not use two pans on a cooking zone, extended zone or
PowerFlex zone at the same time.
 If the pan only partially covers the cooking zone, the handle could
become very hot.
Ensure that you always place the pan in the middle of the cooking
zone.
12
Warning and Safety instructions
Cleaning and care
 Do not use a steam cleaning appliance to clean this appliance.
The steam could reach the electrical components and cause a short
circuit.
 If the cooktop is built in over a pyrolytic oven, the cooktop should
not be used whilst the pyrolytic process is being carried out, as this
could trigger the overheating protection mechanism on the cooktop
(see relevant section).
13
Caring for the environment
Disposal of the packing
material
Disposing of your old
appliance
The transport and protective packaging
has been selected from materials which
are environmentally friendly for
disposal, and can normally be recycled.
Electrical and electronic appliances
often contain valuable materials. They
also contain specific materials,
compounds and components, which
were essential for their correct function
and safety. These could be hazardous
to human health and to the environment
if disposed of with your domestic waste
or if handled incorrectly. Please do not,
therefore, dispose of your old appliance
with your household waste.
Recycling the packaging reduces the
use of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites. Ensure that any plastic
wrappings, bags etc. are disposed of
safely and kept out of the reach of
babies and young children. Danger of
suffocation.
Please dispose of it at your local
community waste collection / recycling
centre for electrical and electronic
appliances. You are also responsible for
deleting any personal data that may be
stored on the appliance prior to
disposal. Please ensure that your old
appliance poses no risk to children
while being stored prior to disposal.
14
Overview
Cooktop
KM 6113
a Cooking zone with TwinBooster
b Cooking zone with Booster
c Cooking zone with Booster
d Controls / Indicators
15
Overview
KM 6112 / KM 6115 / KM 6116
a Cooking zone with TwinBooster
b Cooking zone with Booster
c Cooking zone with Booster
d Cooking zone with Booster
e Controls / Indicators
16
Overview
KM 6117
a Cooking zone with TwinBooster
b Cooking zone with Booster
c Cooking zone with TwinBooster
d Cooking zone with Booster
e Controls / Indicators
17
Overview
KM 6118
a Cooking zone with TwinBooster
b Cooking zone with Booster
c Cooking zone with Booster
d Cooking zone with Booster
e Controls / Indicators
18
Overview
Controls / Indicators
i
j
k
l
e
g
h
d
88
8
8.
8
8
a
f
c
b
Sensor controls
a For switching the cooktop on/off
b Setting
- For setting the power level
- For setting the time
- For activating/deactivating the system lock/safety lock
c For switching on/off the Booster/TwinBooster
d For selecting the cooking zone
e Timer
- For switching on and off
- For switching between timer functions
- For selecting a cooking zone (see "Switching a cooking zone off
automatically")
Indicator lights
f Booster/TwinBooster activated
h Auto heat-up or extended power setting (see "Programming")
j For cooking zone selection, e.g. rear right burner
k Minute minder
19
Overview
l In half hours if the minute minder setting exceeds 99 minutes
g Cooking zone display


 to 








Cooking zone ready for use
Keeping warm setting
Power setting
TwinBooster level 1
Booster / TwinBooster level 2
No pan on cooking zone or pan unsuitable (see "Induction")
Residual heat
Auto heat-up
System lock/Safety lock activated
Demonstration mode activated
Fault (see "Safety switch-off")
i Timer display
 to  Duration in minutes
. to . Time in hours
20
Overview
Cooking zone data
Cooking zone
KM 6113
Ø in cm*
Rating in watts for 230 V**

18–28
Normal
TwinBooster, level 1
TwinBooster, level 2
2600
3000
3700

14–20
Normal
Booster
1850
3000

10–16
Normal
Booster
1400
2200
Total
7400
* Cookware of any diameter may be used within the specified range.
** The wattage quoted may vary depending on the size and material of the pans used.
Cooking zone
KM 6112 / KM 6115 / KM 6116 / KM 6118
Ø in cm*
Rating in watts for 230 V**

16–23
Normal
TwinBooster, level 1
TwinBooster, level 2
2300
3000
3700

10–16
Normal
Booster
1400
2200

14–20
Normal
Booster
1850
3000

14–20
Normal
Booster
1850
3000
Total
7400
* Cookware of any diameter may be used within the specified range.
** The wattage quoted may vary depending on the size and material of the pans used.
21
Overview
Cooking zone
KM 6117
Ø in cm*
Rating in watts for 230 V**

16–23
Normal
TwinBooster, level 1
TwinBooster, level 2
2300
3000
3700

10–16
Normal
Booster
1400
2200

14–20
Normal
TwinBooster, level 1
TwinBooster, level 2
1850
2500
3000
20 x 30
Normal
TwinBooster, level 1
TwinBooster, level 2
2300
3000
3700
14–20
Normal
Booster
1850
3000
Total
7400

* Cookware of any diameter may be used within the specified range.
** The wattage quoted may vary depending on the size and material of the pans used.
22
Before using for the first time
 Please stick the extra data plate for
the appliance supplied with this
documentation in the space provided
in the "Service" section of this
booklet. Alternatively, the additional
label can be stuck near the appliance
if the appliance markings are not
visible after installation.
 Remove any protective wrapping and
stickers.
Cleaning the cooktop for the
first time
 Before using for the first time, clean
the cooktop with a damp cloth only
and then wipe dry.
Switching on the cooktop for
the first time
The metal components have a
protective coating which may give off a
slight smell when heated up for the first
time. The induction coils may also give
off a slight smell for the first few hours
of operation. This smell will be less
noticeable with each subsequent use
before dissipating completely.
The smell and any vapours given off do
not indicate a faulty connection or
appliance and they are not hazardous
to health.
Please note that the heating up time
on induction cooktops is very much
shorter than on conventional
cooktops.
23
Induction
The induction principle
 When the appliance is switched
An induction coil is located under each
cooking zone. When a cooking zone is
switched on, this coil creates a
magnetic field which impacts directly
on the base of the pan and heats it up.
The cooking zone itself is heated up
indirectly by the heat given off by the
pan.
on either deliberately or by mistake,
or when there is residual heat
present, there is the risk of any metal
items placed on the cooktop (e.g.
cutlery) heating up.
Danger of burning!
Do not use the cooktop as a resting
place for items. Switch the cooking
zones off after use with the
appropriate sensor and do not rely
on the pan detector.
An induction cooking zone only works
when a ferromagnetic pan is placed on
it (see "Pans"). The induction cooking
zone automatically recognises the size
of the pan.
The  symbol flashes alternately with
the power setting selected in one of the
cooking zones
– if it is switched on without a pan in
place, or if the pan is unsuitable (nonmagnetic base),
– if the diameter of the base of the pan
is too small,
– if the pan is taken off the cooking
zone when it is switched on.
If a suitable pan is placed on the
cooking zone within 3 minutes,  will go
out and you can continue as normal.
If no pan or an unsuitable pan is placed
on the cooking zone, the cooking zone
will switch off automatically after 3
minutes.
24
Induction
Noises
When using an induction cooking zone,
the following noises can occur in the
pan, depending on what it is made of
and how it has been constructed.
On the higher power settings, it might
buzz. This will decrease or cease
altogether when the power setting is
reduced.
If the pan base is made of layers of
different materials (e.g. in a sandwiched
base), it might emit a cracking sound.
Whistling might occur if linked zones
(see "Booster") are being used at the
same time, and the pans also have
bases made of layers of different
materials.
You might hear a clicking sound from
the electronic switches, especially on
lower power settings.
You might hear a whirring sound when
the cooling fan switches on. It switches
on to protect the electronics when the
cooktop is being used intensively. The
fan may continue to run after the
appliance has been switched off.
25
Induction
Pans
Suitable pans:
– Stainless steel pans with a base that
can be magnetised.
– Enamelled steel pans.
– Cast iron pans.
– Lift pans into position on the
cooktop. Sliding them into place can
cause scuffs and scratches.
– Often the maximum diameter quoted
by manufacturers refers to the
diameter of the top rim of the pot or
pan. The diameter of the base
(generally smaller) is more important.
Unsuitable pans:
– Stainless steel pans without a
magnetic base.
– Aluminium and copper pans.
– Glass, ceramic or earthenware pots
and pans.
To test whether a pot or pan is suitable
for use on an induction cooktop, hold a
magnet to the base of the pan. If the
magnet sticks, the pan is suitable. If an
unsuitable pan is used, the  symbol
will flash alternately with the power
setting selected.
Please be aware that the properties of
the pan base can affect the evenness
with which food heats up in the pan.
– To make optimum use of the cooking
zones, choose pans with diameters
larger than the innermost markings
but smaller than the outermost
markings (see "Cooking zone data").
If the diameter of the pan is smaller
than the innermost marking, the pan
will not be recognised and  will flash
alternately with the power setting
selected.
– Do not use pots and pans with bases
with pronounced edges or ridges.
These could scratch or scour the
cooktop surface permanently.
26
– Where possible, use pans with
vertically straight sides. If a pan has
angular sides, induction also acts on
the sides of the pan. The sides of the
pan may discolour or the coating
may peel off.
Tips on saving energy
– Use a lid whenever possible to
minimise heat loss.
– Select a smaller pan when cooking
small quantities. A smaller pan uses
less energy than a larger pan with
very little in it.
– Cook with as little water as possible.
– Once food has come to the boil or
the oil in the pan is hot enough for
frying, reduce the heat to a lower
setting.
– Use a pressure cooker to reduce
cooking times.
27
Power level range
The cooktop is programmed with 9 power levels at the factory. If you wish to finetune a setting, you can extend the power setting range to 17 power levels (see
"Programming").
Keeping warm function
Melting butter
Dissolving gelatine
Melting chocolate
Making milk puddings
Warming small quantities of liquid
Cooking rice
Defrosting frozen vegetables (blocks)
Making porridge
Warming liquid and semi-solid foods
Making omelettes or lightly fried eggs
Steaming fruit
Cooking pasta/dumplings
Steaming vegetables and fish
Defrosting and reheating frozen food
Gently frying eggs (without overheating the fat)
Bringing large quantities of food to the boil, e.g. casseroles
Thickening custard and sauces, e.g. hollandaise
Gentle braising (without overheating the fat) of fish,
schnitzel and sausages
Frying pancakes, potato fritters etc.
Braising for stews
Boiling large quantities of water
Bringing to the boil
Settings
Default
Extended
setting
settings
(9 power
(17 power
levels)
levels)
h
h
1–2
1–2.
2
3
2–2.
3–3.
3
3
4
2.–3
2.–3.
4–4.
4
5
5
6
6–7
4–5.
5
5–5.
5.–6.
6.–7
6–7
6.–7.
7
8
9
6.–7
8–8.
9
These settings should only be taken as a guide. The power of the induction coils will vary
depending on the size and material of the pan. For this reason, it is possible that the
settings will need to be adjusted slightly to suit your pans. As you use the cooktop, you will
get to know which settings suit your pans best. When using new pans that you are not
familiar with, set the power level below the one specified.
28
Operation
Operating principles
The glass ceramic cooktop is equipped
with electronic sensor controls which
react to finger contact. For safety
reasons, in order to switch the cooktop
on, the On/Off  sensor needs to be
touched for a little longer than the other
sensors.
A tone sounds each time a sensor is
touched.
In order to set or alter a power level or a
duration, the cooking zones and the
timer must be "active". To activate a
cooking zone or the timer, touch the
sensor for selecting the relevant
cooking zone or the timer. After you
have touched the sensor, the relevant
cooking zone or the timer display will
start to flash. The cooking zone or the
timer is "active" whilst the display is
flashing and you can set a power level
or a duration.
Exception: If only one of the cooking
zones is in use, you can alter the power
level without activating the cooking
zone.
Malfunction due to dirty and/or
covered sensors:
If the sensors are dirty or covered,
this could cause them to fail to react,
to activate a function or even to
switch the cooktop off automatically
(see "Safety switch-off"). Placing hot
pans on the sensors/indicators can
damage the electronic unit
underneath.
Keep the sensors and indicators
clean and do not place anything on
top of them. Do not place hot pans
on them.
29
Operation
 Fire hazard!
Switching off
Do not leave the cooktop unattended
whilst it is being used.
Please note that the heating up time
on induction cooktops is very much
shorter than on conventional
cooktops.
 To switch a cooking zone off, touch
the sensor for the required cooking
zone twice.
Switching on
 Touch the  sensor.
 appears in each of the cooking zone
displays and  appears in the timer
display. If no further entry is made, the
cooktop will switch itself off after a few
seconds for safety reasons.
Selecting/Changing the power
setting
 Briefly touch the sensor of the
desired cooking zone.
 will flash alternately with the selected
power setting in the cooking zone
display.
 Touch the + or - sensor repeatedly
until the power setting you want
appears in the cooking zone display.
The power setting selected flashes in
the display for a few seconds to start
with and then lights up constantly.
Selecting the power setting with - will
select cooking with Auto heat-up.
Selecting the power setting with + will
select cooking without Auto heat-up
(see "Auto heat-up").
30
 To switch off the cooktop and all the
cooking zones, touch the  sensor.
Residual heat indicator
If a cooking zone is still hot, the residual
heat indicator will light up after it has
been switched off.
The lines of the residual heat indicator
go out one after another as the cooking
zone cools down. The last horizontal
line only goes out when the cooking
zone is safe to touch.
 Danger of burning! Do not touch
the cooking zones whilst the residual
heat indicators are lit up.
Operation
Auto heat-up
Continued
cooking setting
Heat-up time
[min : sec]
1
approx. 0 : 15
1.
approx. 0 : 15
2
approx. 0 : 15
2.
approx. 0 : 15
3
approx. 0 : 25
Activating
3.
approx. 0 : 25
 Briefly touch the sensor of the
desired cooking zone.
4
approx. 0 : 50
4.
approx. 0 : 50
5
approx. 2 : 00
5.
approx. 5 : 50
6
approx. 5 : 50
6.
approx. 2 : 50
7
approx. 2 : 50
7.
approx. 2 : 50
8
approx. 2 : 50
8.
approx. 2 : 50
9
–
When Auto heat-up has been activated,
the cooking zone switches on
automatically at the highest setting and
then switches to the continued cooking
setting which you have previously
selected. The heat-up time depends on
which continued cooking setting has
been chosen (see chart).
 Set the continued cooking setting
you want by touching the - sensor.
During the Auto-heat up time (see chart)
the indicator light next to the continued
cooking setting selected will light up.
In the extended range of power settings
(see "Programming"),  flashes
alternately with the continued cooking
setting selected.
Changing the continued cooking
setting while the cooking zone is
heating up deactivates Auto heat-up.
Deactivating
 Briefly touch the sensor of the
desired cooking zone.
 Select a different power setting.
The continued cooking settings with a dot
after the number are only available if the
power setting range has been extended (see
"Programming").
31
Operation
Booster
The cooking zones are equipped with a
Booster or TwinBooster (see "Overview
– Cooktop"). You can use the Booster
function for a maximum of two cooking
zones at the same time.
When activated, the power is boosted
for a maximum of 15 minutes so that
large quantities can be heated quickly,
e.g. water for cooking pasta.
If the Booster function is switched on
when
– no setting has been selected, the
cooking zone will revert automatically
to setting 9 at the end of the Booster
time or if the Booster function is
switched off before this.
– a setting has been selected, the
cooking zone will revert automatically
to the setting selected at the end of
the Booster time or if the Booster
function is switched off before this.
32
Cooking zones are networked in pairs
to supply the power for the Booster
function. When the Booster function is
selected, a proportion of energy is
taken away from the linked cooking
zone and the following happens within
the pairs:
– Auto heat-up is deactivated.
– The power setting is reduced.
– The linked cooking zone is switched
off.
Operation
Switching on the Booster
 Briefly touch the sensor of the
desired cooking zone.
 Select a power setting if necessary.
 Touch the B I/II sensor.
The indicator for the Booster lights up,
and  starts to flash in the cooking zone
display. After a few seconds,  will light
up constantly and the indicator light will
go out.
 Touch the B I/II sensor repeatedly
until the indicator light for the Booster
goes out and the cooking zone
setting appears in the display.
or
 Briefly touch the sensor of the
desired cooking zone.
 Select a different power setting.
Switching on the TwinBooster, level 1
 Briefly touch the sensor of the
desired cooking zone.
 Select a power setting if necessary.
 Touch the B I/II sensor.
The indicator for the Booster lights up,
and  starts to flash in the cooking zone
display. After a few seconds,  will light
up constantly and the indicator light will
go out.
Switching on the TwinBooster, level 2
 Briefly touch the sensor of the
desired cooking zone.
 Select a power setting if necessary.
 Touch the B I/II sensor twice.
The indicator for the Booster lights up,
and  starts to flash in the cooking zone
display. After a few seconds,  will light
up constantly and the indicator light will
go out.
Switching off the Booster /
TwinBooster
 Briefly touch the sensor of the
desired cooking zone.
33
Operation
Keeping warm
The keeping warm function is not
designed to reheat food from the cold
state. It is only for keeping food warm
directly after cooking.
Setting the keeping warm function
 Briefly touch the sensor of the
desired cooking zone.
 Touch the + sensor until  appears in
the cooking zone display.
If the keeping warm function has been
activated, the cooking zone will switch
off automatically after a maximum of 2
hours.
Switching off the keeping warm
function
– Only use pans for keeping food
warm. Cover the pan with a lid.
 Select a different power setting or
switch the cooking zone off.
– You do not have to stir food while it is
being kept warm.
– Nutrients are lost when food is
cooked, and continue to diminish
when food is kept warm. The longer
food is kept warm for, the greater the
loss of nutrients. Try to ensure that
food is kept warm for as short a time
as possible.
34
 Briefly touch the sensor of the
desired cooking zone.
Timer
The cooktop has to be switched on if
you wish to use the timer.
You can set a time between
1 minute () and 9.5 hours (.).
Minute minder
Setting
 Touch the  sensor.
The timer can be used for two different
functions:
 and the minute minder indicator light
will flash in the timer display.
– to set the minute minder
 Select the time you want with the - or
+ sensor.
– to set a cooking zone to switch off
automatically
Use the - sensor to reduce the time
from . to , and the + sensor to
increase the time from  to .. The
display stops at . and at . To
continue beyond this setting, briefly
remove your finger from the sensor and
then touch it again.
Durations exceeding 99 minutes are set
in half-hour steps. The half hour is
indicated by a dot after the number.
Changing the minute minder
 Touch the  sensor.
 Select the time you want with the - or
+ sensor.
Deleting the minute minder
 Touch the  sensor.
 Touch and hold the - and + sensors
at the same time until  appears in
the timer display.
35
Timer
Switching a cooking zone off
automatically
You can set a time after which the
cooking zone will turn off automatically.
This function can be used on all zones
at the same time.
If the time programmed is longer than
the maximum operational time
allowed, the cooking zone will switch
off after the maximum time allowed
(see "Safety switch-off").
 Select a power setting for the zone
you require.
 Keep touching the  sensor until the
indicator light for this cooking zone
starts flashing.
If several cooking zones are on, the
indicator lights flash in a clockwise
direction, starting with the front left.
 Select the time you require.
36
 If you want to set another cooking
zone to switch off automatically,
follow the same steps as described
above.
If more than one switch-off time is
programmed, the shortest time
remaining will be displayed, and the
corresponding indicator light will flash.
The other indicator lights will light up
constantly.
 If you want to show the time
remaining for another zone which is
counting down in the background,
touch the  sensor repeatedly until
the indicator light for the zone you
require flashes.
Timer
Using both timer functions at
the same time
The minute minder and automatic
switch-off functions can be used at the
same time.
If you want to show the times remaining
which are counting down in the
background:
 Touch the timer display repeatedly
until
If you have programmed in one or more
switch-off times, and would like to use
the minute minder as well:
– the indicator light for the required
cooking zone flashes (automatic
switch-off).
 Touch the  sensor repeatedly until
the indicator lights of the
programmed cooking zones light up
constantly and the minute minder
indicator light flashes.
– the minute minder indicator light
flashes.
 Set the time as described above.
If you have set the minute minder and
would like to programme in one or more
switch-off times as well:
Starting with the shortest time
remaining which is shown in the
display, all cooking zones which are
switched on and the minute minder are
selected clockwise.
 Touch the  sensor repeatedly until
the indicator light for the zone you
require flashes.
 Set the time as described above.
Shortly after the last entry, the timer
display switches to the function with the
shortest remaining time.
37
Safety features
Safety lock / System lock
The system lock and safety lock are
deactivated if there is an interruption
to the power supply.
Your cooktop is equipped with a system
lock and a safety lock to prevent the
cooktop and the cooking zones being
switched on or any settings being
altered.
The system lock is activated when the
cooktop is switched off. When it is
activated, the cooktop cannot be
switched on and the timer cannot be
used. The cooktop is programmed so
that the system lock must be activated
manually. It can be programmed to be
activated automatically 5 minutes after
the cooktop has been switched off if
the system lock is not manually
activated first (see "Programming").
The safety lock is set when the
cooktop is switched on. When the
safety lock is activated:
– The power settings for the cooking
zones and the timer settings cannot
be changed.
– The cooking zones, entire cooktop
and the timer can be switched off,
but once switched off cannot be
switched on again.
If an unavailable sensor is touched
whilst the system lock or the safety lock
is activated,  will appear in the front left
cooking zone display and  will appear
in the front right cooking zone display
after a few seconds.
Activating
 Touch the + and - sensors at the
same time until  appears in the front
left and  appears in the front right
cooking zone display and a tone
sounds.
 will go out after a short while.
Deactivating
 Touch the + and - sensors at the
same time until  goes out from the
front left and  goes out from the
front right cooking zone display and a
tone sounds.
38
Safety features
Power management
Safety switch-off
The total output of the cooktop can be
limited to 3.0 kW in order to match to
the requirements of a local network
provider. On cooktops with 4 cooking
zones, level 2 of the TwinBooster
cannot be set if Power management is
activated (see "Programming").
Safety switch-off with an overlong
cooking time
The safety switch-off mechanism is
triggered automatically if one of the
cooking zones is heated for an
unusually long period of time. This
period of time depends on the power
setting selected. Once exceeded, the
cooking zone switches off and the
residual heat indicators appear. The
cooking zone can be operated again
after it has been switched off and back
on.
Safety switch-off if the sensors are
covered
Your cooktop will switch off
automatically if one or several sensors
remain covered for more than about
13 seconds, for example by finger
contact, food boiling over or an object.
An  will flash in each of the cooking
zone displays.
Remove the obstruction or clean the
area.  will go out and the cooktop will
be ready to use again.
39
Safety features
Overheating protection
All the induction coils and cooling
elements for the electronics are fitted
with an overheating protection
mechanism. Before the induction coils
or cooling elements get too hot, the
overheating protection mechanism cuts
in in one of the following ways:
Induction coils
– Any Booster function in operation will
be switched off.
– The set power level will be reduced.
– The cooking zone will switch off
automatically. The fault code 
will appear.
You can use the cooking zones again as
usual when the fault message has gone
out.
Cooling elements
– Any Booster function in operation will
be switched off.
– The set power level will be reduced.
– The cooking zones switch off
automatically.
The affected cooking zones can only be
used again as usual once the cooling
element has cooled down to a safe
level.
40
The overheating protection mechanism
can be triggered by:
– Heating up an empty pan.
– Fat or oil being heated on a high
power setting.
– Insufficient ventilation to the
underside of the cooktop.
– A hot cooking zone being switched
on after an interruption to the power
supply.
If, despite removing the cause, the
overheating protection mechanism
triggers again, contact Miele.
Control panel
The control panel electronic unit is
equipped with an overheating
protection mechanism. This switches
off the cooktop automatically before the
electronic unit overheats.
The fault code  will appear if the
control panel overheating protection
mechanism is triggered. You can use
the cooktop again once the fault code
has gone out.
The overheating protection mechanism
can be switched on if more than one
cooking zone is operated on a high
setting for a long period of time.
Cleaning and care
 Danger of burning!
The cooking zones must be switched
off. The cooktop needs to cool
down.
 Danger of injury!
The steam from a steam cleaning
appliance could reach electrical
components and cause a short
circuit.
Do not use a steam cleaner to clean
the cooktop.
The use of unsuitable cleaning
agents can cause the surfaces to
discolour or alter.
The external surfaces of this
appliance are all susceptible to
scratching.
Remove any cleaning agent residues
immediately.
Allow the cooktop to cool down
before cleaning.
 Clean the cooktop after every use.
 Dry the cooktop thoroughly after
every cleaning to avoid limescale
residue.
Unsuitable cleaning agents
To avoid damaging the surfaces of your
appliance, do not use:
– washing-up liquid,
– cleaning agents containing soda,
alkalines, ammonia, acids or
chlorides,
– cleaning agents containing descaling
agents,
– stain or rust removers,
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners,
– solvent-based cleaning agents,
– dishwasher cleaner,
– grill and oven cleaners,
– glass cleaning agents,
– hard, abrasive brushes or sponges,
e.g. pot scourers, or sponges which
have been previously used with
abrasive cleaning agents,
– dirt erasers.
41
Cleaning and care
Cleaning the glass ceramic
surface
Risk of damage from pointed
objects!
Do not clean the area between the
glass ceramic surface and the frame
or the frame and the worktop with
sharp, pointed objects.
Not all soiling and residues can be
removed using a solution of
washing-up liquid.
An invisible film can develop that can
lead to discolouration of the ceramic
glass. This discolouration cannot be
removed.
Clean the glass ceramic surface
regularly with a suitable ceramic
cooktop cleaning agent.
 Remove any coarse soiling with a
damp cloth and more stubborn
soiling with a glass scraper.
 Then clean the ceramic glass surface
with the Miele ceramic and stainless
steel cooktop cleaner (see "Optional
accessories") or with a proprietary
ceramic glass cleaner applied with a
paper towel or a clean cloth. Do not
apply the cleaner while the cooktop is
still hot, as this can result in marking.
Please follow the detergent
manufacturer's instructions.
 Finally wipe the cooktop with a damp
cloth and dry it with a soft, dry cloth.
Residues can burn onto the cooktop
the next time it is used and cause
damage to the glass ceramic surface.
Ensure that all cleaner residues are
removed.
42
 Spots caused by limescale, water
and aluminium residues (spots with a
metallic appearance) can be removed
using Miele's ceramic and stainless
steel cooktop cleaner.
 Danger of burning!
Wear oven gloves when removing
residues of sugar, plastic or
aluminium foil from a hot cooktop a
glass scraper.
 Should any sugar, plastic or
aluminium foil spill or fall onto a hot
cooking zone while it is in use, first
switch off the appliance.
 Then carefully scrape off these
residues immediately whilst they are
still hot, using a shielded scraper
blade.
 Afterwards, clean the glass ceramic
surface in its cooled state, as
described above.
Programming
You can programme certain settings on
the cooktop to suit your personal
needs. Several settings can be changed
in succession.
After accessing programming mode, 
(Programme),  (Status) and numbers
will appear in the cooking zone
displays.
Once you have left programming
mode, the cooktop will reset
automatically. The process is
completed when the Booster indicator
lights up briefly.
Do not switch the cooktop on until the
reset process is completed.
Calling up programming
 With the cooktop switched off touch
the  and B I/II sensors at the same
time until the Booster indicator light
flashes.
Setting a programme
 Touch the (front) left cooktop sensor.
 Set the programme you want with the
+ or - sensor.
Setting the status
 Touch the sensor for selecting the
front right cooking zone.
 Set the Status you want with the + or
- sensor.
How to save the settings
 Touch the  sensor until the displays
go out.
How to avoid saving the
settings
 Touch the B I/II sensor until the
displays go out.
43
Programming
1)
Programme
P0
P2
P3
P4
P5
P7
44
Demonstration
mode and factory
default settings
2)
Status
Settings
3)
S0
Demonstration mode on
S1
Demonstration mode off
S9
Factory default settings reinstated
Number of power
settings
S0
9 power settings
S1
17 power settings
Induction warning
tone when there is
no pan or the pan
is unsuitable
S0
Off
S1
Quiet
S2
Medium
S3
Loud
S0
Off
S1
Quiet
S2
Medium
S3
Loud
S0
Off
S1
Quiet
S2
Medium
S3
Loud
S0
Activating the system lock manually
S1
Activating the system lock
automatically and manually
Keypad tone when
a sensor is
touched
Audible tone for
the timer
System lock
4)
Programming
1)
P8
P5.
P6.
1)
2)
2)
Settings
Programme
Status
Power
management
S0
Off
S1
On
Audible tone if the
sensors are
covered
S0
Off
S1
On
Sensor switch
reaction speed
S0
Slow
S1
Standard
S2
Fast
Programmes not shown here have no allocation.
The factory setting is shown in bold.
3)
After the cooktop has been switched on,  will appear in the front left cooking zone
display and  will appear in the front right cooking zone display for a few seconds.
4)
The intermediate settings are shown in the cooking zone display by a dot after the power
setting. Auto heat-up is indicated by  flashing alternately with the continued cooking
setting.
45
Programming
Reset
This function allows you to quickly reset
all the programming settings back to
their original factory default settings.
Initiating reset
 Switch the cooktop on.
 Touch the sensors for selecting the
front left and front right cooking
zones at the same time until the
cooking zone displays go out
(approx. 10 seconds).
The reset process takes approx.
1 minute. It is completed when the
Booster indicator lights up briefly.
Do not switch the cooktop on until the
reset process is completed.
46
Problem solving guide
With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be remedied
without contacting Miele. This will save you time and money because you won't
need a service call.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions.
Problem
Possible cause and remedy
The cooktop or cooking There is no power to the cooktop.
zones cannot be
 Check if the circuit breaker has tripped. Contact
switched on.
an electrician or Miele (for the minimum fuse
rating, see data plate).
There may be a technical fault.
 Disconnect the appliance from the electricity
supply for approx. 1 minute. To do this:
– switch off at the wall socket, or switch off at the
isolator, or
– disconnect the mains circuit breaker.
 Reset the trip switch in the mains fuse box, and
switch the appliance back on. If it still will not
switch on, contact a qualified electrician or Miele.
A smell and vapours are The metal components have a protective coating.
given off when the new When the appliance is used for the first time, this
appliance is being used. causes a smell and possibly also vapour. The material
from which the induction coils are made also gives off
a smell in the first few hours of operation. This smell
will be less noticeable with each subsequent use
before dissipating completely. The smell and any
vapour given off do not indicate a faulty connection or
appliance and they are not hazardous to health.
The  symbol lights up There is no pan on the cooking zone, or the pan is
unsuitable.
or flashes alternately
with the selected power  Use a suitable pan (see "Pans").
setting or  in one of
the cooking zone
displays.
47
Problem solving guide
Problem
Possible cause and remedy
After switching on the
cooktop,  appears in
the front left cooking
zone display and 
appears in the front
right cooking zone
display for a few
seconds.
The system lock or safety lock is activated.
 Deactivate the system lock or safety lock (see
"System lock / Safety lock").
After switching on the
cooktop,  appears in
the front left cooking
zone display and 
appears in the front
right cooking zone
display for a few
seconds. The cooking
zones do not heat up.
The cooktop is in Demonstration mode.
 You need to deactivate Demonstration mode (see
"Programming").
A cooking zone
switches itself off
automatically.
A cooking zone might have been operated for too
long.
 You can use the cooking zone again by switching
it back on (see "Safety switch-off").
A cooking zone or the
The overheating protection mechanism has been
whole cooktop switches activated.
off automatically.
 See "Overheating protection".
The Booster has
automatically switched
off early.
The overheating protection mechanism has been
activated.
 See "Overheating protection".
The cooking zone is not The overheating protection mechanism has been
working in the usual
activated.
way on the power
 See "Overheating protection".
setting selected.
Power setting 9 is
automatically reduced if
you select power
setting 9 on two linked
cooking zones or
extended zones at the
same time.
48
Operating both zones at power setting 9 would
exceed the permitted maximum power for the
cooktop.
 Use another cooking zone which is not linked.
Problem solving guide
Problem
Possible cause and remedy
The food in the pan
There is too much food in the pan.
hardly heats up or does  Start cooking at the highest power setting and
not heat up at all when
then turn down to a lower one manually later on.
the Auto heat-up
The pan is not conducting heat properly.
function is switched on.
 Use a different pan which is better able to conduct
heat on an induction cooktop.
A noise can be heard
after the appliance is
switched off.
The fan will continue running until the appliance has
cooled down. It will then switch itself off
automatically.
The sensor switches
show increased
sensitivity or fail to
react.
The sensitivity level of the sensor switches has
changed.
 Make sure that there is no direct light (from the sun
or from an artificial source) falling onto the
cooktop. The area surrounding the cooktop must
not be too dark.
 Make sure that there is nothing covering the
sensors or the cooktop.
Take any pans off the cooktop and wipe away any
food deposits.
 Interrupt the power supply to the cooktop for
approx. 1 minute.
 If the problem persists after power is restored,
please contact Miele.
The cooktop switches
off and  flashes in the
cooking zone displays.
One or several of the sensors are covered, for
example, by finger contact, food boiling over or by an
object such as an oven glove or tea towel.
 Remove the obstruction and/or clean the cooktop.
49
Problem solving guide
Problem
Possible cause and remedy
 lights up in the rear
left cooking zone
display,  lights up in
the rear right cooking
zone display and
numbers light up in the
front displays.
left , right  or , or , or 
A calibration fault has occurred after the reset
function has been activated or after an interruption to
the power supply.
 If the displays do not go out after 5 minutes,
proceed as described under "The sensors show
increased sensitivity or fail to react".
left , right 
left , right 
The overheating protection mechanism has been
triggered.
 See "Overheating protection".
left , right  or 
The fan is blocked or faulty.
 Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.
 If this fault message continues to appear in the
display, contact Miele.
 and other numbers
There is a fault in the electronic module.
 Interrupt the power supply to the cooktop for
approx. 1 minute.
 If the problem persists after power is restored,
please contact Miele.
50
Optional accessories
Miele offers a range of useful
accessories, as well as cleaning and
conditioning products for your
appliance.
Cleaning and care products
Original Miele ceramic and stainless
steel cooktop cleaner 250 ml
These products can be ordered from
the Miele online shop.
They can also be ordered directly from
Miele (see end of this booklet for
contact details).
Removes heavy soiling, limescale
deposits and aluminium residues.
Saucepans and frying pans
Original Miele all purpose microfibre
cloth
Miele offer a wide range of pans which
are perfect for Miele cooktops. Please
refer to the Miele website for more
details on individual products.
– Pans in various sizes
Removes finger marks and light soiling.
– Frying pan with lid
– Non-stick pan
– Wok
– Gourmet oven dishes
51
Safety instructions for installation
 The appliance must only be installed and connected to the electricity supply
by a suitably qualified and competent person in strict accordance with current
national and local safety regulations.
Fit the wall units and rangehood before fitting the cooktop to avoid damaging
the cooktop.
 The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any splashbacks must be of heat-resistant
material as well.
 The cooktop must not be installed over a fridge, fridge-freezer,
freezer, dishwasher, washing machine, washer-dryer or tumble dryer.
 This cooktop must not be installed above ovens unless these
have a built-in cooling fan.
 After installation, ensure that nothing can come into contact with
the connection cable and that it is without hindrance.
 The connection cable may not come into contact with any moving
kitchen component (e.g. a drawer) or be subject to mechanical
obstruction which could damage it.
 Observe carefully the safety clearances listed on the following
pages.
All dimensions in this instruction booklet are given in mm.
52
Safety distances
Safety distance above the
cooktop
A minimum safety distance must be
maintained between the cooktop and
the rangehood above it. See the
rangehood manufacturer's operating
and installation instructions for details.
If the manufacturer's instructions are
not available for the rangehood, a
minimum safety distance of 600 mm
must be maintained.
For any flammable objects, e.g. utensil
rails, wall units etc., a minimum safety
distance of 600 mm must be
maintained between these objects and
the highest part of the cooktop below.
When two or more appliances which
have different safety distances are
installed together below a
rangehood, you should observe the
greatest safety distance.
53
Safety distances
Safety distances to the sides
and back of the appliance
Ideally the cooktop should be installed
with plenty of space on either side.
There may be a wall at the rear or a tall
unit or wall on one side (right or left),
taking into account the distances
below. On the other side, however, no
tall unit or wall should stand closer than
300 mm to the edge of the cooktop.
Before installing the cooktop, check
that the below clearance requirements
are met.
Minimum horizontal distance from the
back edge of the cooktop to a
combustible surface:
50 mm.
Minimum horizontal distance from the
right edge of the cooktop to a
combustible surface:
50 mm.
Minimum horizontal distance from the
left edge of the cooktop to a
combustible surface:
50 mm.
Minimum safety distances
underneath the cooktop
To ensure sufficient ventilation to the
cooktop, a certain gap must be left
between the underside of the cooktop
and any oven, interim shelf or drawer.
The minimum gap between the
underside of the cooktop and
– the top of an oven is 15 mm.
– the top of an interim shelf is 15 mm.
– the base of a drawer is 75 mm.
54
Interim shelf
It is not necessary to fit an interim shelf
underneath the cooktop but one may
be fitted if you wish.
Leave a gap of 10 mm at the back of
the shelf to accommodate the cable.
Miele recommends a gap at the front of
the shelf of 20 mm to ensure good
ventilation.
Installation notes
Seal between the cooktop and
the worktop
Do not use sealant between the
cooktop and the worktop. This could
result in damage to the cooktop or
the worktop if the cooktop ever
needs to be removed for servicing.
The sealing strip under the edge of
the top part of the appliance
provides a sufficient seal for the
worktop.
Tiled worktop
Grout lines  and the hatched area
underneath the cooktop frame must be
smooth and even. If they are not, the
cooktop will not sit flush with the
worktop and the sealing strip
underneath the cooktop will not provide
a good seal between the cooktop and
the worktop.
55
Building-in dimensions
KM 6112
a Front
b Installation height
c Mains connection box
The mains connection cable (1440 mm long) is supplied separately with the
cooktop.
56
Building-in dimensions
KM 6113
a Front
b Installation height
c Mains connection box
The mains connection cable (1440 mm long) is supplied separately with the
cooktop.
57
Building-in dimensions
KM 6115
a Front
b Installation height
c Mains connection box
The mains connection cable (1440 mm long) is supplied separately with the
cooktop.
58
Building-in dimensions
KM 6116
a Front
b Installation height
c Mains connection box
The mains connection cable (1440 mm long) is supplied separately with the
cooktop.
59
Building-in dimensions
KM 6117
a Front
b Installation height
c Mains connection box
The mains connection cable (1440 mm long) is supplied separately with the
cooktop.
60
Building-in dimensions
KM 6118
a Front
b Installation height
c Mains connection box
The mains connection cable (1440 mm long) is supplied separately with the
cooktop.
61
Installation
Preparing the worktop
Installing the cooktop
 Make the worktop cut-out as shown
in "Building-in dimensions". Observe
the safety distances (see "Safety
distances").
 Feed the mains connection cable
down through the cut-out.
 Seal the cut surfaces on wooden
worktops with a suitable sealant to
avoid swelling caused by moisture.
The sealant must be heat-resistant.
Make sure the sealant does not
come into contact with the top
surface of the worktop.
The seal underneath the cooktop will
hold it securely in the cut-out. Any gap
between the frame and worktop will
reduce with time.
Connecting the mains
connection cable to the
appliance
The mains connection cable must be
connected by a suitably qualified and
competent electrician in accordance
with current local and national safety
regulations.
 Follow the instructions in the wiring
diagram (see "Electrical connection Wiring diagram").
62
 Place the cooktop centrally in the
cut-out. When doing this, make sure
that the seal under the cooktop sits
flush with the worktop on all sides.
This is important to ensure an
effective seal all round.
Do not use any additional sealant
(e.g. silicone).
If the seal does not meet the worktop
correctly on the corners, the corner
radii (≤ R4) can be carefully scribed to
suit.
 Connect the cooktop to the mains
electricity supply.
 Check that the cooktop works.
Electrical connection
 Danger of injury!
Connection
Incorrect installation, maintenance or
repair work is dangerous to users.
Miele cannot be held liable for
damage or injury caused by incorrect
installation, maintenance or repair
work, or by an inadequate or faulty
earthing system (e.g. electric shock).
All electrical work must be carried
out by a suitably qualified and
competent person, in strict
accordance with current national and
local safety regulations.
After installation, ensure that all
electrical components are shielded
and cannot be accessed by users.
AC 230 V, 50 Hz
The voltage and rated load are given on
the data plate. Please ensure these
match the household mains supply.
Connection must be made via a
suitable isolator switch which provides
disconnection on all poles and which
complies with national and local safety
regulations. When switched off there
must be an all-pole contact gap of at
least 3 mm in the isolator switch. The
isolator switch must be easily
accessible after the appliance has been
built in.
Please see the wiring diagram for
connection.
Residual current device
For extra safety, it is advisable to
protect the appliance with a suitable
residual current device (RCD) with a trip
range of 30 mA.
Mains connection cable
The cooktop must be connected to the
electrical supply with a special
connection cable, type H 05 VV-F (PVC
insulated) with a suitable diameter.
Please see the wiring diagram for
connection.
See the data plate on the cooktop for
the correct voltage and frequency.
63
Electrical connection
Replacing the mains
connection cable
 Danger of electrical shock!
The mains connection cable must
only be replaced by a suitably
qualified and competent person in
accordance with current local and
national safety regulations.
The earth lead must be connected to
the point marked .
If the mains connection cable needs to
be replaced, it must be replaced with a
special connection cable, type H 05 VVF (PVC insulated), available from Miele,
in order to avoid a hazard.
The connection data is given on the
data plate.
Wiring diagram
a b c d e L1
L2
L3
N
200-240 V~
200-240 V~
200-240 V~
a b c d e L1
L2
N
200-240 V~
200-240 V~
(L3)
a b c d e L1
64
200-240 V~
N
(L2)
Service
Contact in case of fault
In the event of any faults which you cannot remedy yourself, please contact Miele.
Contact information for Miele can be found at the end of this document.
Please quote the model and serial number of your appliance when contacting
Miele. This information can be found on the data plate.
Data plate:
Adhere the extra data plate supplied with the appliance in the space below. Make
sure that the model number matches the one specified on the back cover of this
document.
Warranty
The manufacturer's warranty for this appliance is 2 years.
For further information, please refer to your warranty booklet.
65
Miele Australia Pty. Ltd.
ACN 005 635 398
ABN 96 005 635 398
Miele Experience Centre and
Head Office Melbourne:
1 Gilbert Park Drive
Knoxfield, VIC 3180
Miele Experience Centre South Melbourne:
206-210 Coventry Street
South Melbourne, VIC 3205
Miele Experience Centre and Office Sydney:
3 Skyline Place
Frenchs Forest, NSW 2086
Miele Experience Centre and Office Brisbane:
39 Harvey Street North
Eagle Farm, QLD 4009
Miele Experience Centre Gold Coast:
131 Ferry Road
Southport, QLD 4215
Miele Experience Centre and Office Adelaide:
83-85 Sir Donald Bradman Drive
Hilton, SA 5033
Miele Experience Centre and Office Perth:
205-207 Stirling Highway
Claremont, WA 6010
www.miele.com.au
Miele New Zealand Limited
IRD 98 463 631
Head Office:
Level 2, 10 College Hill
Freemans Bay, Auckland 1011
Miele Experience Centre
Auckland:
8 College Hill
Freemans Bay, Auckland 1011
Telephone:
0800 464 353 (0800 4 MIELE)
www.miele.co.nz
Miele Global Headquarters
Germany
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
Federal Republic of Germany
KM 6112 / KM 6113 / KM 6115 / KM 6116 / KM 6117 / KM 6118

en-AU, NZ
M.-Nr. 07 839 980 / 09
Download PDF
Similar pages