0361_95x Magic Comfort Plus_A5_Rev00.indd

2
IMPORTANT SAFEGUARDS
CAUTION
When using electrical appliances, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and/or injury to persons, including
the following:
1 Read all instructions and information in this instruction book and any other
literature included in this carton referring to this product before operating or using
this appliance.
2 Do not touch hot surfaces. Use handles or knobs.
3 To protect against fire, electric shock and personal injury do not immerse cord,
plugs or appliance in water or other liquid.
4 Close supervision is necessary when any appliance is used by or near children.
5 Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts, and before cleaning the appliance.
6 Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions or has been damaged in any way. Return appliance to the nearest
authorized service centre for examination, repair or adjustment.
7 The use of accessory attachments not recommended by the appliance manufacturer
may result in fire, electric shock or personal injury.
8 Do not use outdoors.
9 Do not let cord hang over edge of table or counter, or touch hot surfaces.
10 Do not place on or near a hot gas or electric burner, or in a heated oven.
11 Always turn appliance “OFF”, then plug cord into the wall outlet. To disconnect,
turn switch to “OFF”, then remove plug from wall outlet.
12 Do not use appliance for other then intended household use.
13 Use extreme caution when using hot steam.
This appliance is for household use. Any servicing, other than cleaning and user
maintenance, should be performed by an authorized service centre. Do not immerse
base in water. To reduce the risk of fire or electric shock, do not disassemble the base.
There are no user serviceable parts inside. Repair should be done by authorized service
personnel only.
SAVE THESE INSTRUCTIONS
0361_95x Magic Comfort Plus_A5_Rev00.indd
2
1 Check voltage to be sure that the voltage indicated on the nameplate agrees with
your voltage.
2 Never use warm or hot water to fill the water tank. Use cold water only.
3 Keep your hands and the cord away from hot parts of the appliance during
operation.
4 Never clean with scouring powders or hard implements. Simply use a soft cloth
dampened with water.
5 To avoid your coffee maker scaling up, use purified or bottled water.
INSTRUCTIONS FOR THE POWER SUPPLY CORD
A A short power-supply cord is provided to reduce risks of getting tangled up or
tripping over a longer cord.
B Longer extension cords are available and may be used if care is exercised in their use.
C If a long extension cord is used:
1 the marked electrical rating of the extension cord should be at least as great as
the electrical rating of the appliance.
2 if the appliance is of the grounded type, the extension cord should be a
grounding type
3 the cable does not hang from the table to avoid the risk of getting caught up in it.
08/09/2003, 23.40
GENERAL INFORMATION
TECHNICAL SPECIFICATIONS
This coffee machine is ideal for preparing espresso coffee either with coffee beans
or preground coffee and also features a device for dispensing steam and hot water.
This elegantly styled machine is designed for household use only. It is not suitable
for continuous professional-type use.
• Voltage rating
See rating plate on appliance
• Power rating
See rating plate on appliance
• Casing material
• Size (w x h x d) (mm)
• Weight (Kg)
Metal
330 x 395 x 450
13
• Cord length (mm)
• Control panel
• Water tank (lit.)
TO FACILITATE INTERPRETATION
A warning triangle draws attention to the instructions that are important for user safety. Please carefully abide by these instructions to
avoid serious injury!
This symbol is used to highlight information that is especially important for
ensuring optimal use of the machine.
HOW TO USE THESE OPERATING INSTRUCTIONS
Keep these operating instructions in a safe place and make them available to
anyone else who should use the coffee machine. For further information or an
explanation of problems not completely or sufficiently addressed in these instructions, contact an authorised service centre.
0361_95x Magic Comfort Plus_A5_Rev00.indd
3
• Power supply
1200
Front (Digital)
2,4 - Extractible
See rating plate on appliance
• Coffee container capacity (g.)
300 of coffee beans
• Pump pressure (bars)
15
• Boiler
Stainless steel - Aluminium
• Safety devices
Boiler pressure safety valve
safety thermostat
Subject to engineering and manufacturing changes as warranted by technological
developments.
Machine in conformity with European Directive 89/336/EEC (Italian Legislative
Decree 476 of 04/12/92) concerning electromagnetic compatibility.
08/09/2003, 23.40
ENGLISH
3
4 SAFETY RULES
IN THE EVENT OF AN EMERGENCY
HAZARDS
Immediately unplug the appliance.
THE APPLIANCE MAY ONLY BE USED
- In a closed place.
- To prepare coffee, dispense hot water, froth milk or heat beverages using
steam.
- For household use.
- By adults in full possession of their physical and mental capacities.
NEVER USE THE APPLIANCE
for purposes other than those indicated above to avoid hazards. Never place
any substances in the containers other than those specified in the instruction
manual. When you fill a container, make sure all nearby containers are closed.
Fill the water tank only with fresh drinking water: hot water and/or other liquids
may damage the machine. Do not use carbonated water. The coffee grinder may
be adjusted only while it is running. Do not introduce your fingers or any material
other than coffee beans into the coffee grinder. Before attempting to access the
inside of the coffee grinder, switch OFF the machine and remove the plug from
the electric socket. Do not put coffee beans or instant coffee into the ground coffee
container.
MAINS CONNECTION
Connect the coffee machine to a suitable electric socket. The voltage must match
the voltage specified on the appliance rating plate.
INSTALLATION
- Choose a perfectly level supporting surface. Do not place on a hot surface!
- Maintain a distance of 10 cm from walls and electric or gas burners.
- Do not keep at temperatures below 0 °C; the appliance may be damaged by
freezing.
- The electric socket must be accessible at all times.
- The power cord must not be damaged, secured with clamps, placed on very hot
surfaces etc.
- Do not let the power cord hang loosely (Warning: danger of tripping or of
causing the appliance to fall).
- Do not use the power cord to carry or pull the coffee machine.
0361_95x Magic Comfort Plus_A5_Rev00.indd
4
- The appliance must not be used by children or by individuals unacquainted with
the operating instructions.
- The appliance is dangerous for children. If left unattended it must be
switched off.
- Do not leave the materials used to pack the appliance within children’s reach.
- Do not direct a jet of hot steam and/or hot water toward yourself or others:
danger of scalding.
- Do not introduce any objects through the openings in the appliance (Electrical
hazard!).
- Do not touch the plug when your hands or feet are wet. Do not unplug the
appliance by yanking at the power cord.
- Warning: contact with hot water, steam or and hot water/steam nozzle may
cause burns.
FAULTS
- Do not use the appliance if it malfunctions or you suspect damage, e.g.
after a fall.
- Repairs must be performed by an authorised service centre.
- Do not use an appliance with a defective power cord. The cord may be replaced
exclusively by a service centre (Electrical hazard!).
- Switch off the appliance before opening the service door. Danger of burns!
CLEANING / DESCALING
- Before cleaning the appliance, unplug it and allow it to cool down.
- Avoid exposing the appliance to splashes of water. Do not immerge it in water.
- Do not dry machine components in a conventional or microwave oven.
SPARE PARTS
To guarantee safety, you should use only original spare parts and accessories.
DISPOSAL
- The packing materials can be recycled.
- Appliance: unplug the appliance and cut the power cord.
- Deliver the appliance and power cord to a service centre or public waste
disposal facility.
08/09/2003, 23.40
5
Preground coffee dispenser lid
Coffee bean container lid
Cup heater plate
Coffee bean container
Steam knob
Grind adjustment
lever
Preground coffee measure
Water hardness test
Cleaning brush
Brew group key
Control panel
Hot water/steam
tube
Dose adjustment
lever
ON/OFF switch
Brew group
Service door
Coffee grinds
drawer
Dregs drawer
Height-adjustable
brew unit
Digital display
Coffee button
“ESC” in programming mode
Tray full indicator
Large coffee button
Drip tray + grill
Small coffee button
Programming “MENU” selector button
“OK” in programming mode
Hot water button
“Page down” in programming mode
Preground coffee selector button
“Page up” in programming mode
0361_95x Magic Comfort Plus_A5_Rev00.indd
5
08/09/2003, 23.40
ENGLISH
Water tank lid
Water tank
6 INSTALLATION
See rating plate
If necessary, remove
the swivel ring from the
packing container and fit
it into the machine.
Remove the drip tray from
the packing container and
fit it into the machine.
Fill the
container
beans.
coffee bean
with coffee
RINSING
WARMING UP...
Move the ON/OFF switch
to “I” to turn on the
machine.
The display will signal that
the machine is warming
up.
Fill the tank with fresh drinking water.
Insert the plug into a suitable electric socket.
HOT WATER
WARMING UP...
Place a container beneath
the steam tube.
Press the button to start
loading the circuit.
Wait until a steady stream
of water flows out from the
nozzle.
SELECT PRODUCT
READY FOR USE
HOT WATER
WARMING UP...
“VENTILATE”
Press the button again
to terminate the circuitloading process.
0361_95x Magic Comfort Plus_A5_Rev00.indd
Remove the container.
6
The machine is ready for
use.
08/09/2003, 23.40
Use coffee bean blends for espresso coffee makers. If you
do not obtain the desired result, try using different coffee
blends. Store coffee in a cool place, in a hermetically sealed
container.
You will note a change after dispensing 3 – 4 coffees.
The fineness of the grind
may be adjusted using
the lever.
Coffee flows out more
slowly
Coffee flows out more
quickly
COFFEE DOSE
You must adjust the dose before dispensing coffee.
ADJUSTMENT
This adjustment will have an immediate effect on the coffee
brewed.
To adjust the quantity of coffee
dispensed to the size of your cups,
place a cup beneath the brew unit,
press the button corresponding to
the type of coffee desired and
1 SMALL COFFEE
PROGRAM. QUANTITY
0361_95x Magic Comfort Plus_A5_Rev00.indd
Weaker coffee.
IN CUPS
Stronger coffee.
HOT WATER
COFFEE IN CUPS
You can adjust the quantity
of coffee to be ground.
HOT WATER
PROGRAM. QUANTITY
To adjust the quantity of hot water dispensed
to the size of your cups, place a cup beneath
the steam tube, press the hot water button
and
When the cup has filled to the desired level,
release the button; the machine is now
programmed to dispense the quantity of hot
When the cup has filled to the desired
water you have chosen.
level, release the button; the machine
is now programmed to dispense the The amount of hot water dispensed in a cup may be programmed only if the function has
been enabled in the programming mode (see page 15).
quantity of coffee you have chosen.
7
08/09/2003, 23.41
ENGLISH
ADJUSTMENT
COFFEE GRINDER
ADJUSTMENTS 7
8 MACHINE OPERATION
SELECT PRODUCT
READY FOR USE
Make sure that
machine is ready.
1 SMALL COFFEE
PREBREWING...
the
Position a warm coffee
cup or cups beneath the
brew unit.
Press the button of the
type of coffee desired:
Once for 1 coffee.
Select
the
product
“Preground coffee”.
Introduce ground coffee
using the coffee measure.
MAX 1 MEASURE
0361_95x Magic Comfort Plus_A5_Rev00.indd
Press the
button.
8
When the machine stops
making the coffee, remove
the cup or cups.
Press the button of the
type of coffee desired.
When the machine stops
making the coffee, remove
the cup.
SELECT PRODUCT
READY FOR USE
HOT WATER
Position a container
beneath the steam tube.
Twice for 2 coffees.
1 SMALL COFFEE
PREGROUND COFFEE
SELECT PRODUCT
PREGROUND COFFEE
Position a warm coffee cup
beneath the brew unit.
2 SMALL COFFEES
PREBREWING...
hot
water
N.B. If the function is enabled,
the machine will automatically
stop dispensing.
When the cup has filled to
the desired level, press the
button.
08/09/2003, 23.41
Remove the container.
ENGLISH
STEAM - CAPPUCCINO 9
Fill a cup to 1/3 with cold
milk.
Open the knob to discharge
any residual water.
When only steam comes
out, close the knob.
Position the cup containing
milk beneath the steam
tube.
Open the knob to release
steam.
STEAM
The machine will signal the
function.
Move the cup in a circular
fashion to heat the milk
evenly.
Open the valve to eliminate
any residual water. Close
the knob.
0361_95x Magic Comfort Plus_A5_Rev00.indd
Place a container beneath
the steam tube.
Open the knob.
9
After frothing the milk,
close the knob.
Heat evenly by making
circular movements.
Remove the cup and place
it beneath the brew unit.
Close the knob.
08/09/2003, 23.41
Dispense coffee into the
cup to prepare a delicious
cappuccino.
Remove the container.
Wipe the steam tube clean.
10 DESCALING
You can use any commercially
available non-toxic, non-harmful descaling product for coffee machines. We
recommend using a Saeco descaling agent.
DESCALING
READY FOR USE
DESCALING
READY FOR USE
DESCALING
SIGNAL DESCALING
The machine will display Press the “menu” button.
a message when it needs
descaling.
*
The machine must be descaled every 3-4 months, when you observe a diminished flow
of water or when the machine signals that descaling is necessary. The machine must
be on; it automatically controls the distribution of the descaling solution.
MACHINE IS
DESCALING
Use the buttons to view the Press the “menu” button to Fill the water tank with the Place a large receptacle
descaling menu.
select the function.
descaling solution.
beneath the steam tube.
RINSE MACHINE
MACHINE IS
DESCALING
DESCALING
FINISHED
RINSE MACHINE
Open the steam knob. When the descaling cycle Rinse out the tank and fill it Press the “menu” button.
The machine will start is completed, close the with fresh drinking water.
descaling.
knob.
DESCALING
SIGNAL DESCALING
*
Press the “menu” button.
SIGNAL DESCALING
TIMER
*
RESET DESCALING
NO
Open the knob to rinse.
SELECT PRODUCT
READY FOR USE
Use the buttons to view the Press the “menu” button Clear the descaling signal. Press “esc” to exit the
following menu.
twice.
descaling function.
0361_95x Magic Comfort Plus_A5_Rev00.indd
10
08/09/2003, 23.41
RINSING
FINISHED
On completing the rinse,
close the knob.
ENGLISH
CLEANING AND MAINTENANCE 11
Turn the machine off.
Unplug the machine.
Wash the water tank.
Wash the filter inside it.
Unscrew the “pannarello”
(steam tube attachment)
and clean it.
Remove
the
grounds drawer.
Open the side door
Press the PRESS button to
release the brew group.
0361_95x Magic Comfort Plus_A5_Rev00.indd
11
Use the brush to clean the
ground coffee dispenser.
coffee
Remove the drip tray,
empty it out and wash it.
Remove the drip tray
Unscrew the upper filter
and wash it. Fit it back in
place when clean.
Wash the unit, dry it and
fit it back in place. Do not
press the “PRESS” button.
08/09/2003, 23.42
Remove the dregs drawer,
empty it out and wash it.
Remove the dregs drawer
Set all machine components
back in position.
Close the door.
12 PROGRAMMING MACHINE FUNCTIONS
The user can change some machine operating parameters to suit his/her personal needs.
SELECT PRODUCT
READY FOR USE
ENERGY SAVING
RINSING
Press the “menu” button to
access the programming
mode.
*
Use the “∧” and “∨”
buttons to display/change
the menus.
When the appliance is used infrequently, it can be switched
to the STANDBY mode.
With this function you can cut energy costs.
ENERGY SAVING
RINSING
*
Using the “menu” button you
can select the menu item
marked with an “*”
ENERGY SAVING
RINSING
*
When
the
function
appears, select it using the
“menu” button.
When this function is enabled, the internal machine circuits
will be rinsed immediately after the warming-up phase to
ensure that coffee is prepared with fresh water only.
In all new appliances this function has already been enabled
in the factory.
0361_95x Magic Comfort Plus_A5_Rev00.indd
12
RINSING
LANGUAGE
*
When
the
function
appears, select it using the
“menu” button.
ENERGY SAVING
RINSING
*
Press ESC to exit without
making any changes.
ENERGY SAVING
The display will show
that the machine is in the
standby mode.
RINSING
OFF
From this menu you can
disable the function.
08/09/2003, 23.42
ENERGY SAVING
RINSING
*
Use the “menu” button to
select a menu or confirm
a change.
SELECT PRODUCT
READY FOR USE
Press the “menu” button
to restore the machine to
normal operation.
RINSING
ON
Press the “menu” button to
confirm your choice.
This function allows you to change the display language.
You can choose among Italian, German, Portuguese,
Spanish, English, French and Dutch. The appliance is
usually programmed on the language of the country in
which it is sold.
LANGUAGE
WATER HARDNESS
*
When the function appears, select it using the
“menu” button.
The appliance is factory set on a hardness value of 3. The setting
should be adjusted according to the level of water hardness in the
local area.
This function allows you to turn on the cup heater present in
the machine cover.
Dip the strip in water for 1
second.
Check how many squares
change colour.
13
Select the desired language.
*
When the function appears, select it using the
“menu” button.
CUP HEATER
*
TEMP. LARGE COFFEE
When the function appears, select it using the
“menu” button.
0361_95x Magic Comfort Plus_A5_Rev00.indd
LANGUAGE
ENGLISH
LANGUAGE
ENGLISH
WATER HARDNESS
CUP HEATER
The hardness of tap water may vary depending on the
region. For this reason, the appliance can be set according
to the water hardness in the place where it is to be used,
expressed on a scale of 1 to 4.
Press the “menu” button to
confirm your choice.
WATER HARDNESS
HARDNESS 3
Select the corresponding hardness
(e.g. 2 squares = Hardness 2) and
memorize the value by pressing
the “menu” button.
CUP HEATER
ON
Choose whether you wish
to turn the cup heater plate
on or off.
08/09/2003, 23.42
ENGLISH
PROGRAMMING MACHINE FUNCTIONS 13
*
Press the “menu” button to
confirm your choice.
14 PROGRAMMING MACHINE FUNCTIONS
Users can adjust the temperature of large coffees according
to individual preferences: the possible temperature settings
are “low” - “minimum” - “medium” - “high” - “maximum”.
TEMP. LARGE COFFEE *
TEMP. COFFEE
When the function appears, select it using the
“menu” button.
Users can adjust the coffee temperature according to
individual preferences: the possible temperature settings
are “low” - “minimum” - “medium” - “high” - “maximum”.
TEMP. COFFEE
*
TEMP. SMALL COFFEE
When the function appears, select it using the
“menu” button.
Users can adjust the temperature of small coffees according
to individual preferences: the possible temperature settings
are “low” - “minimum” - “medium” - “high” - “maximum”.
0361_95x Magic Comfort Plus_A5_Rev00.indd
14
TEMP. LARGE COFFEE
MEDIUM
Select the desired temperature.
TEMP. COFFEE
MEDIUM
Select the desired temperature.
TEMP. LARGE COFFEE
HIGH
Press the “menu” button to
confirm your choice.
TEMP. COFFEE
MAXIMUM
Press the “menu” button to
confirm your choice.
TEMP. SMALL COFFEE *
PREBREWING
TEMP. SMALL COFFEE
MEDIUM
TEMP. SMALL COFFEE
MEDIUM
When the function appears, select it using the
“menu” button.
Select the desired temperature.
Press the “menu” button to
confirm your choice.
08/09/2003, 23.42
With the pre-brewing process the coffee is slightly
moistened before actual brewing. This brings out the full
aroma of the coffee and lends it an excellent flavour. It
is possible to choose either “enabled”, or “disabled”, or
“long”.
PREBREWING
PREGRINDING
*
When
the
function
appears, select it using the
“menu” button.
With the pre-grinding process the machine grinds twice: the
first time for the type of coffee selected and the second time
for the subsequent coffee (not yet selected).
This function is useful when you want to reduce the time
necessary for dispensing several coffees in sequence (e.g.
while entertaining guests or during a party).
PREGRINDING
*
PROGRAM. HOT WATER
When
the
function
appears, select it using the
“menu” button.
This function enables programming of the amount of hot
water to be dispensed. If the function is turned on, the
machine can be programmed to dispense a fixed quantity
of water according to user needs. If the function is off, the
user must manually stop the flow of water.
PROGRAM. HOT WATER *
TOTAL COFFEE
When
the
function
appears, select it using the
“menu” button.
0361_95x Magic Comfort Plus_A5_Rev00.indd
15
PREBREWING
ON
Choose whether you wish
to turn the pre-brewing
function on or off.
PREGRINDING
OFF
Choose whether you wish
to turn the pre-grinding
function on or off.
PROGRAM. HOT WATER
OFF
Choose whether you wish to
enable or disable the water
dispensing programming.
08/09/2003, 23.42
PREBREWING
OFF
Press the “menu” button to
confirm your choice.
PREGRINDING
ON
Press the “menu” button to
confirm your choice.
PROGRAM. HOT WATER
ON
Press the “menu” button to
confirm your choice.
ENGLISH
PROGRAMMING MACHINE FUNCTIONS 15
16 PROGRAMMING MACHINE FUNCTIONS
This function enables the user to see how many coffees
the machine has already dispensed. It is not possible to
change this value.
TOTAL COFFEE
DESCALING
*
When
the
function
appears, select it using the
“menu” button.
This function enables you to see how much more water the machine can dispense before it
needs descaling. The value will depend on the hardness setting.
This function includes a menu for clearing the “DESCALING” message after descaling has
been carried out.
TOTAL COFFEE
8
The display will show the
number of coffees the
machine has dispensed.
SIGNAL DESCALING
TIMER
*
When
the
function
appears, select it using the
“menu” button.
LEFT QUANTITY
LITRE
RESET DESCALING
NO
149
Quantity of water to be
dispensed before the
machine needs descaling.
0361_95x Magic Comfort Plus_A5_Rev00.indd
Press the “MENU” button
16
TOTAL COFFEE
8
Press “ESC” to exit the
menu.
QUANTITY WATER
NOT REACHED
A message will be
displayed informing the
user that descaling is not
necessary.
RESET DESCALING
NO
This menu allows you to
clear the “DESCALING”
message.
Choose
whether
to
clear the count of water
dispensed.
08/09/2003, 23.42
Press the “menu” button to
confirm your choice.
This function enables you to activate an automatic
descaling cycle. See page 10.
DESCALING
SIGNAL DESCALING
*
When
the
function
appears, select it using the
“menu” button.
This is a factory-set function that automatically switches the
machine into “Standby” when 3 hours have elapsed since a
coffee was dispensed.
The switch-off time can be adjusted, in 15-minute intervals, to
a minimum of 15 minutes; the function cannot be deactivated.
This function is used to rinse all the coffee-dispensing parts
with water.
TIMER
RINSING CYCLE
*
When
the
function
appears, select it using the
“menu” button.
RINSING CYCLE
FACTORY SETTINGS
*
When
the
function
appears, select it using the
“menu” button.
0361_95x Magic Comfort Plus_A5_Rev00.indd
17
DESCALING
FILL WATERTANK
DESCALING
FILL WATERTANK
Prepare the machine for
descaling.
STANDBY
AFTER
2:45
Use the buttons to adjust
the timer setting.
RINSING CYCLE
FACTORY SETTINGS
*
The machine will carry out
a rinsing cycle.
08/09/2003, 23.42
ENGLISH
PROGRAMMING MACHINE FUNCTIONS 17
Press the “menu” button to
confirm your choice.
STANDBY
AFTER
1:15
Press the “menu” button to
confirm your choice.
FILL WATERTANK
When the cycle is
completed this message
will be displayed:
18 PROGRAMMING MACHINE FUNCTIONS
With this function you can restore the machine operating
parameters originally set by the manufacturer. If you restore
all the factory settings, all customized settings will be lost.
FACTORY SETTINGS
ENERGY SAVING
*
When
the
function
appears, select it using the
“menu” button.
0361_95x Magic Comfort Plus_A5_Rev00.indd
18
FACTORY SETTINGS
NO
Choose whether to restore
the initial factory settings.
08/09/2003, 23.42
FACTORY SETTINGS
YES
Press the “menu” button to
confirm your choice:
DISPLAY MESSAGES 19
ENERGY SAVING
DESCALING
READY FOR USE
Press “MENU”
Descale the machine
FILL WATERTANK
Fill the water tank with fresh drinking water.
COFFEE BEANS EMPTY
READY FOR USE
Fill the coffee bean container and start the coffee
dispensing cycle.
DREGDRAWER FULL
Remove the dregs drawer and empty out the dregs into a
suitable container.
The machine does not The machine is not Move the main switch to ON.
turn on.
connected to the power
Check the plug and the
supply.
connection
The coffee is not hot The cups are cold.
Warm up the cups.
enough.
A low temperature has Set the machine on a higher
been set.
temperature.
Only
water
is No preground coffee has Dispense
again
after
dispensed when you been introduced.
introducing preground coffee.
select
“preground
coffee”.
No hot water or steam The tube
is dispensed.
clogged.
BREWUNIT MISSING
DREGDRAWER MISSING
Fit the brew unit properly in place.
Fit the drip tray and dregs drawer properly in place.
Close the front door.
The machine takes a Excessive
long time to warm up. built up.
Contact an authorised service centre.
GRINDER BLOCKED
19
scale
is Clean the nozzle opening
with a needle.
has Descale the machine.
The brew unit cannot The unit has stopped in Close the door and switch on
be removed.
the wrong position.
the machine; the brew unit
will move back into position.
BREWUNIT BLOCKED
0361_95x Magic Comfort Plus_A5_Rev00.indd
nozzle
08/09/2003, 23.43
ENGLISH
Messages are displayed to guide users and help them to use the machine correctly.
Cod. 0361.955 Rev.00 del 01-09-03
Saeco International Group S.p.A. - Via Panigali 39
40041 Gaggio Montano - Bologna - Italy
Tel. +39 0534.771.111 - Fax. +39 0534.31025 - http://www.saeco.com
0361_95x Magic Comfort Plus_A5_Rev00.indd
20
08/09/2003, 23.43
Download PDF
Similar pages