Undercounter Ice and Water Dispenser with Chewblet

Undercounter Ice and Water Dispenser
with Chewblet® Ice Icemaker
7UC100A, 7UD100A
Installation, Operation and Service Manual
Serial numbers D25455 to E01086
7UC100A
7UD100A
Following installation, please forward this manual
to the appropriate operations person.
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
Order parts online:
www.follettice.com
00966879R06
Contents
Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ambient Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clearances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Refrigeration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Heat Rejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Detailed Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
4
4
4
4
4
4
4
4
5
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Maintenance/Cleaning Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Accessing Internal Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Filter Display Indicator Activation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Cleaning and Sanitizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LED Indicator Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Water Feed Schematic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bin Melt Water/Evaporator Feed/Clean Out System Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vent System Schematic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Refrigeration Schematic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Condenser Fan Motor Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Interface Display Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Wiring Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
11
12
13
13
14
15
16
17
Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exterior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bin Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Evaporator Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
18
20
22
24
2
Undercounter Dispenser and Icemaker 7UC100A/7UD100A
Welcome–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability, and outstanding
after-the-sale support. To ensure that this product delivers that same degree of service, we ask that you take a
moment to review this manual before beginning the installation. Should you have any questions or require technical
help at any point, please call our technical service group at (877) 612-5086 or +1 (610) 252-7301.
Before You Begin––––––––––––––––––––––––––––––––––––––––––––––––––––
After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If damage
is found, immediately notify the shipper and contact Follett Corporation so that we can help in the filing of a claim,
if necessary. If needed, the serial number of your dispenser can be found by removing the drip tray (1) and locating
the serial number label (2).
2
1
Check your paperwork to verify that you received the correct dispenser. Follett configuration numbers are designed
to provide information about the type of dispenser you are receiving. The following is an explanation of the different
model numbers.
7
Dispenser Storage
Capacity
7 lb
UC
100
Configuration
UCUndercounter
UD Undercounter - ADA
A
Icemaker Capacity
100
lb per day
Condenser
AAir-cooled
Important Safety Information––––––––––––––––––––––––––––––––––––––––––
Please read and adhere to the following safety information while installing, using, or servicing your Follett 7 Series
Ice Dispenser.
1. Always disconnect power before servicing the dispenser.
2. Ice is slippery. Maintain counters and floors around dispenser in a clean and ice-free condition.
3. Ice is food. Follow the recommended cleaning and sanitizing instructions to maintain cleanliness of
delivered ice.
Undercounter Dispenser and Icemaker 7UC100A/7UD100A3
Specifications––––––––––––––––––––––––––––––––––––––––––––––––––––––
Dimensions
7UC100A
7UD100A
Width
14.55" (370 mm)
14.55" (370 mm)
Depth
22.05" (560 mm)
22.05" (560 mm)
Height
33.50" (851 mm)
31.50" (800 mm)
Unit Shipping Weight
110 lb (50 kg)
110 lb (50 kg)
Ambient Information
CAUTION!
The 7UC100A and 7UD100A are for indoor use only.
Maximum*
Minimum*
Air Temperature
100 F (38 C)
50 F (10 C)
Water Temperature
90 F (32.2 C)
40 F (4.5 C)
Water Pressure
70 psi
†
Relative Humidity
10 psi
55% at 78 F (25.5 C)
* Use outside of these limitations is misuse and will void warranty.
† Best performance is achieved between 80 F (27 C) and 50 F (10 C).
Plumbing
§§ Water Inlet: 1/4" MPT
§§ Optional Drain Accessory Kit (item# 00956375 or 00981977): 1/2" ID tubing
§§ Water shut-off recommended within 5 ft. (1.5 m) of dispenser
Water
WARNING!
Connect to potable water supply only.
§§ Water Mineral Content:
–– TDS: greater than 5 ppm (mg/l) but less than 400 ppm (mg/l)
–– Hardness: Less than 200 mg/l (12 gpg)
§§ Not recommended for use with softened water
Clearances
§§ 3" (77 mm) behind dispenser for electrical and optional drain connection.
§§ 6" (153 mm) in front of dispenser for ventilation.
Electrical
§§ 115V, 60 Hz, 1 phase, 5A, maximum fuse 15A
§§ Connect to dedicated 15A circuit, fuse or breaker
§§ Must be grounded - requires 3-prong outlet. Do not remove ground.
Refrigeration
WARNING!
Do not damage the refrigerant circuit. Refrigerant can cause personal injury and/or damage dispenser.
§§ Refrigerant R134a – 204 grams (7.2 oz.)
Heat Rejection
§§ 1700 BTU/hr (498 W)
4
Undercounter Dispenser and Icemaker 7UC100A/7UD100A
Specifications
(continued)–––––––––––––––––––––––––––––––––––––––––––––––
Detailed Drawing
22.05" (560 mm)
14.55" (370 mm)
A
4.00"
(102 mm)
FRONT VIEW
Dimension
3.81"
(97 mm)
7UC100A
7UD100A (ADA)
A
33.50” (851 mm)
31.50” (800 mm)
B
22.76” (578 mm)
20.76” (527mm)
C
22.69” (576 mm)
20.69” (526 mm)
SIDE VIEW
14.55" (370 mm)
2.40"
(61 mm)
2.98"
(76 mm)
1/4" MPT
water inlet
power cord
A
L2
G
L1
NEMA 5-15
right angle
B
C
BACK VIEW
Undercounter Dispenser and Icemaker 7UC100A/7UD100A5
Installation–––––––––––––––––––––––––––––––––––––––––––––––––––––––––
CAUTION!
No service or maintenance should be performed until the technician has thoroughly read this service
manual. Except for routine cleaning and sanitizing, only qualified technicians should attempt to service
or maintain this equipment.
1. Measure to verify that the dispenser will fit in the desired location.
A clearance of at least 3" (77 mm) is required behind the dispenser
for the electrical and optional drain connection.
Fig. 1 2. Ensure that the finished floor inside the cabinet is flush (level) with
the floor outside the cabinet (Fig. 1). If the cabinet floor is lower
than the finished floor, the cabinet floor must be built up (using
appropriate materials) until it is flush with the finished floor. A flush
floor is required for proper operation and maintenance/service of the
dispenser.
3. Rough-in the electrical service, water line, and optional Drip Tray
Drain Kit*.
Note: The dispenser must be installed such that it can be moved
forward at least 4" (102 mm) to allow access to the Bin Lid
Cleaning Spout (Fig. 9.6) for dispenser cleaning and sanitizing.
Take this requirement into consideration during rough-in.
cabinet space
floor
§§ Electrical: 115V, single phase, 15A receptacle required. The dispenser
has an integral 8 ft. (2.4 m) cord and plug.
§§ Water: supply line (with shut-off valve) connects to the dispenser's 1/4"
MPT inlet.
* The optional Drip Tray Drain Kit (item# 00956375) requires a floor drain
within 15 ft. (4.5 m) of the dispenser. For detailed installation instructions,
please refer to the instructions shipped with the Drip Tray Drain Kit.
4. Install the angle bracket inside the cabinet,18.15" (461 mm) from
the toe kick (Fig. 2.1). The bracket prevents the dispenser from
being located/pushed beyond the recommended cabinet space
depth. Do not attach the bracket to the dispenser.
Fig. 2 1
18.15” (461 mm)
6
Undercounter Dispenser and Icemaker 7UC100A/7UD100A
Installation
(continued)
––––––––––––––––––––––––––––––––––––––––––––––––––
5. Connect water line. Recommended routing (Fig. 3) allows easy access
to water for cleaning and sanitizing procedure.
Fig. 3 3' (91.4 cm)
Plug
Valve
1/4" MPT
6. If installing the optional internal water filter*, please complete the
steps shown in Accessing Internal Components on page 11
before proceeding. If not, proceed to step 10.
* If your dispenser has the internal water filter option, the water filter must be
installed for the dispenser to operate. Because internal components will need to
be accessed for both procedures, Follett recommends installing the water filter
just prior to initial sanitizing.
Fig. 4 1
2
7. Lift and remove the top panel, set aside (Fig. 4.1).
8. Remove two screws (Fig. 4.2) and remove left side panel.
9. Install filter as shown. Turn filter clockwise until it is fully seated
(Fig. 4.3).
10. Connect power supply.
11. Sanitize the dispenser prior to use (see Cleaning and Sanitizing
on page 10).
3
Undercounter Dispenser and Icemaker 7UC100A/7UD100A7
Maintenance/Cleaning Mode––––––––––––––––––––––––––––––––––––––––––
Fig. 5
Cleaning Mode (Dispensing Disabled) - Use when cleaning surface
Entering Cleaning Mode disables the User Interface and allows you to clean
the outside of the dispenser without accidentally dispensing water or ice.
2
1. To enter Cleaning Mode, press and immediately release the
maintenance/clean switch (Fig. 5.1) so that only "FRESH
FILTERED ICE AND WATER" displays in the user interface
(Fig. 5.2).
1
2. To exit Cleaning Mode, press and immediately release the
maintenance/clean switch so that the ice and water icons also
display in the user interface.
Maintenance Mode (All Operation Disabled) - Use when cleaning ice
machine
Entering Maintenance Mode disables all operations and allows you to safely
clean and/or sanitize the icemaker and dispenser.
4
1. To enter Maintenance Mode, press and hold the maintenance/clean
displays in the user interface (Fig. 5.4).
switch (Fig. 5.3) until
2. To exit Maintenance Mode, press and hold the maintenance/clean
switch until
no longer displays in the user interface.
3
Note: Entering and exiting Maintenance Mode will reset the six-month
periodic maintenance reminder.
Accessing Internal Components–––––––––––––––––––––––––––––––––––––––
CAUTION!
Fig. 6 Except for routine cleaning and sanitizing, only qualified
technicians should attempt to service or maintain this equipment.
1. Press and hold the maintenance/clean switch (Fig. 5.1) until
displays in the user interface (Fig. 5.2).
2. Remove (unscrew) chrome ice dispenser chute (Fig. 6.1).
1
3. Remove the drip tray (Fig. 6.2).
4. Remove the two screws (Fig. 6.3) on the front panel (behind the
drip tray).
5. Remove and set aside the front panel (Fig. 6.4) - do not
disengage the plug on the back of the User Interface or the
tubing at the water dispenser chute (if so equipped).
3
2
4
8
Undercounter Dispenser and Icemaker 7UC100A/7UD100A
Filter Display Indicator Activation––––––––––––––––––––––––––––––––––––––
If you purchased your dispenser with a Follett filter, the filter display indicator Fig. 7 activation has been preset at the factory.
If you are using an “after market filter,” an adjustment may be made to
activate the “Fresh Filtered Ice & Water” display.
1
Activating “Fresh Filtered Ice & Water”
1. Remove the front panel as explained in Accessing Internal
Components on page 8 then refer to Fig. 7.
2. Remove top panel (Fig. 7.1).
3. Remove (1) screw and top of control board enclosure (Fig. 7.2).
4. Locate the DIP switches on the dispenser's control board (Fig. 8).
Use a fine-pointed object to move the “Filter” DIP switch (DIP switch
#3) to the ON position.
Deactivating the Six-Month Maintenance/Filter Change Reminder
1. Use a fine-pointed object to move the “PM” DIP switch (DIP switch
#8) to the ON position.
2
OFF
No internal filter
Not used (OFF position)
Not used (OFF position)
3
2
Not used (OFF position)
Ice only
1
Ice & water
Internal filter supplied or to display "Fresh Filtered"
4
5
Not used (OFF position)
Six-month PM enabled
7
8
15 minute delay
6
Fig. 8
ON
30 minute delay
Six-month PM disabled
Undercounter Dispenser and Icemaker 7UC100A/7UD100A9
Cleaning and Sanitizing––––––––––––––––––––––––––––––––––––––––––––––
Cleaning and sanitizing should be performed at least every 6 months (more often if
local water conditions dictate). For initial startup, only sanitizing is required.
Fig. 9
IMPORTANT!Prior to cleaning and sanitizing, the dispenser must be moved
forward at least 4" (102 mm). Do not remove the Bin Lid, cleaning and sanitizing
solution is added through the Bin Lid Access Spout (Fig. 9.6).
1
3
WARNING!
§§ Place the dispenser in Maintenance Mode prior to servicing or
cleaning the ice machine. See Maintenance/Cleaning Mode on page
8.
§§ For protection, rubber gloves and safety goggles (and/or face shield)
should be worn when handling Cleaner or Sanitizer.
§§ Do not mix Cleaner and Sanitizer together. It is a violation of federal
law to use these solutions in a manner inconsistent with their labeling.
§§ Do not use bleach, it will damage the dispenser.
2
4
Required Supplies
§§ (3) x 7 oz. SafeCLEAN™ environmentally-friendly icemaker cleaner packets
§§ Nu-Calgon IMS-II sanitizing concentrate
§§ Funnel and Bucket
Cleaning: Icemaker and Dispenser
6
1. Dispense all the ice out of the unit.
2. Press and hold maintenance/clean switch until
displays in the user
interface to enter Maintenance Mode.
3. Remove (unscrew) chrome ice dispense chute (Fig. 9.1).
7
4. Remove drip tray (Fig. 9.2).
5
5. Remove (2) screws located behind the drip tray (Fig. 9.3).
6. Move front panel and place on top or beside unit (Fig. 9.4).
7. Remove plug cap from the end of drain tube (Fig. 9.5) 9 lower tube to
drain water into bucket.
8. After the system has been drained of water replace plug cap in drain tube. Secure tube in holder.
9. Remove cap from bin lid cover (Fig. 9.6).
10.Screw bin lid cover cap onto ice discharge chute (Fig. 9.7).
11. Mix SafeCLEAN Ice Machine Cleaner, (3) x 7 oz. packets, with 3 gal. (11.4 L) of water.
12.Pour cleaning solution into bin lid access spout until solution reaches the spout neck.
13.Allow the solution to remain in unit for 15 minutes.
14.While machine is cleaning, remove top and right side panel to access and clean air-cooled condenser.
15.Drain system by lowering drain tube into bucket.
16.Secure drain tube into holder.
17. Fill one time with potable water and drain with tube. Secure drain tube.
Sanitizing: Icemaker and Dispenser
1. Complete steps 1-11 above.
2. Mix a sanitizing solution of 2.5 gal. (9.5 L) of water and 4 oz. (118 ml) of Nu-Calgon IMS-II sanitizing
concentrate.
3. Pour sanitizing solution into bin lid access spout until solution reaches the spout neck.
4. Allow the solution to remain in unit for 5 minutes.
5. Drain system by lowering drain tube.
6. Secure drain tube into holder.
7. Fill and drain three times with potable water.
8. Place a bucket under the dispense chute and remove cap. Note: Some sanitizing solution will remain and
drain out when cap is removed. Reposition cap on bin lid spout.
9. Reinstall front panel, ice dispense chute, and drip tray.
10. Press and hold maintenance/clean switch to exit Maintenance Mode.
10
Undercounter Dispenser and Icemaker 7UC100A/7UD100A
Cleaning and Sanitizing
(continued)–––––––––––––––––––––––––––––––––––––––
Cleaning: User Interface and Exterior Cabinet
1. Press and release maintenance/clean switch so that only "FRESH FILTERED ICE AND WATER" displays
in the user interface to enter Cleaning Mode (and disable dispensing).
2. Plastic parts, including the user interface, can be cleaned with a non-abrasive glass cleaner. Clean
stainless steel panels with stainless steel cleaner.
3. Press and release maintenance/clean switch to put unit back into service.
Service––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
LED Indicator Description
The LED Indicator is located behind the front panel.
LED Name
Clean
—
LED Color
Power ON
Low bin
Making ice
Sleep cycle
Time delay
Low water
Maint
Service
HI amps
HI press
Water leak
Drip tray
PM
Clean
Fig. 10 Description
Green
The dispenser is in Cleaning Mode. Dispenser is disabled to allow for cleaning of front
panel. See Maintenance/Cleaning Mode on page 8.
N/A
Not used.
PM
Red
Six-month periodic maintenance required.
Drip tray
Red
Drip tray full.
Water leak
Red
Internal leak in dispenser.
High amps
Red
Auger gearmotor has exceeded 0.55A. The HI amps and Time delay LEDs will illuminate,
the machine will shut down for one hour, the LEDs will turn off, and the machine will
resume normal operation.
Service
Red
8000 hour bushing check (call Follett technical service group at (877) 612-5086 or
+1 (610) 252-7301).
Maintenance
Yellow
Enter Maintenance Mode by pressing and holding maintenance/clean switch for 5 seconds.
Unit will not make or dispense ice.
Low water
Yellow
Insufficient water supply to machine or no low bin LED upon startup.
Time delay
Yellow
Ice production will not resume for at least 15 minutes after a full bin is achieved and a
minimum amount of dispense activity has elapsed.
Sleep cycle
Green
After a full bin and 10 minutes of non-use, the unit goes into standby and will not produce
ice until either 12 hours has elapsed or ice or water has dispensed.
Making ice
Green
Gearmotor, compressor, and fan motor energized.
Low bin
Green
Bin switch closed calling for ice.
Power on
Green
Power supplied to unit.
Undercounter Dispenser and Icemaker 7UC100A/7UD100A11
Service
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––
Water Feed Schematic
Evaporator
Float
Water Chute
(optional)
Filter (optional)
Water Solenoid Valve
(optional)
Water Solenoid Valve
12
Undercounter Dispenser and Icemaker 7UC100A/7UD100A
Service
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––
Bin Melt Water/Evaporator Feed/Clean Out System Schematic
Storage Bin
Vent System Schematic
Storage Bin
Vent Tube
Reservoir
Undercounter Dispenser and Icemaker 7UC100A/7UD100A13
Service
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––
Refrigeration Schematic
CONDENSER
FILTER-DRIER
CAP TUBE
COMPRESSOR
EVAPORATOR
ACCUMULATOR
14
HIGH PRESSURE VAPOR
LOW PRESSURE LIQUID
HIGH PRESSURE LIQUID
LOW PRESSURE VAPOR
Undercounter Dispenser and Icemaker 7UC100A/7UD100A
Service
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––
Condenser Fan Motor Removal
Undercounter Dispenser and Icemaker 7UC100A/7UD100A15
Service
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––
User Interface Display Identification
Operation Display
Condition
Procedure
Normal
operation
PM
­—
Cleaning
Mode
Press and release maintenance/clean switch to
clean the user interface without dispensing ice
or water (see Maintenance/Cleaning Mode on
page 8).
Drip tray full
Empty drip tray.
Six-month
periodic
maintenance
required
Follow Maintenance Mode procedure (below)
and also see Cleaning and Sanitizing on page
10.
Maintenance
Mode
Enter Maintenance Mode by pressing
maintenance/clean switch until
displays.
Complete the cleaning and sanitizing procedure
shown on page 10 and change the filter, if so
equipped. Exit Maintenance Mode by pressing
and holding maintenance/clean switch until
no longer displays.
Service - 8000 Call Follett Technical Service Group at (877)
hr bushing
612-5086 or +1 (610) 252-7301. The flashing
check
wrench indicates that the 8000 hr bushing check
is required.
High amps
Contact Follett technical service group at (877)
612-5086 or +1 (610) 252-7301.
Note: For dispensers after serial number
D45191, the phone and wrench will not be
illuminated.
Internal leak in Locate leak and repair - Press reset on control
dispenser
board. Contact Follett if icemaker is leaking.
Sleep mode
16
Undercounter Dispenser and Icemaker 7UC100A/7UD100A
Press either dispense button to return to normal
operation.
N
POWER L1
GND
WHITE
WHITE
#17
WHITE/
GRAY
BLACK
GRN-YEL
#11
BLACK
BLUE/
PINK
GRN-YEL
#4
AUGER
FAN
BLACK
BLUE
BLACK
#8
#7
BLACK
#15
GRN-YEL
WATER DISPENSE VALVE
BLACK
#18
#10
BLACK
#14
DISP.
#12
FAILSAFE SOLENOID VALVE
WHITE
#16
WHITE
P1
L1
L1
L1
P3
P19
P20
P21
FAN
ICE DISP
P6
FS
WD
K4
K7
K6
K5
CO2
AUGER
CAP
K2
#13
N
BLUE
#5
N
D21
D22
D19
N
D20
D17
N
N
N
T2
CURRENT SENS
N
K3
D18
N
N
P5
RESERVOIR
WATER SENSOR
DRIP TRAY WATER
SENSOR
CHASSIS
WATER SENSOR
P4
P2
AUGER
GRN-YEL
#19
UV LIGHT
UV ON
D37
#20
#2
S2
P10
SERIAL COMM
HI PRS
P14
P16
WATER AUX
START
RELAY
P17
WATER LEVELS
BIN
P12 BIN
P12 BIN P11 CLEAN SAFE
P15
ICE AUX
P17
WATER LEVELS
YELLOW
ORANGE
BLACK
P18
T1
BLACK
WHITE
S
R
O.L.
K1
BLACK
#1
P7
RESET
S1
MAINT.
CLEAN
P11 CLEAN SAFE
P7
P8 RS485
RS485 UI
6
2
5
1
PROGRAM
P9
MODEL SELECT
GRN-YEL
C
#3
COMP.
P13 SPARE CTS
D16
COMPRESSOR
D1
CLEAN
POWER
LOW BIN
MAKING ICE
SLEEP CYCLE
TIME DELAY
LOW WATER
MAINTENANCE
SERVICE
HI AMPS
HI PRESSURE
WATER LEAK
DRIP TRAY
PM
USER
INTERFACE
RS485 UI
D15
D14
D13
D12
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
Service
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––
Electrical Wiring Diagram
Undercounter Dispenser and Icemaker 7UC100A/7UD100A17
Parts––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Exterior
6
4
7
11
5
10
9
2
8
18
1
Undercounter Dispenser and Icemaker 7UC100A/7UD100A
3
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Exterior
Reference #
Description
Part #
1
Drain, Tray Assy
00957613
2
Panel, Front Assy - Includes Water Nozzle and Plug
00957621
3
Chute, Water (water option)
00957688
4
Panel, Top Left
00924761
5
Panel, Top Right
00924779
6
Panel, Top
00957654
7
Panel, Rear
00957662
Panel, Lower, 7UC100A Height: 12.0" (304.8 mm)
00924738
Panel, Lower, 7UD100A Height: 10.0" (254 mm)
00924746
9
Panel, Intake
00924787
Not Shown
Cord, 115 VAC
00958058
Not Shown
Packaging for Returns, Dispenser
00957993
Not Shown
Covers, Agion, User Interface
00969030
Panel, Bottom Left/Right, 7UC100A
00967331
Panel, Bottom Left/Right, 7UD100A
00967356
Panel, Bottom Rear, 7UC100A
00967349
Panel, Bottom Rear, 7UC100A
00967364
Not Shown
Fitting, Elbow - 1/4" FPT x 1/4" Tube
00974261
Not Shown
Drip Tray Drain Kit
00956375
8
10
11
Undercounter Dispenser and Icemaker 7UC100A/7UD100A19
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Interior
4
7
3
1
12
2
10
10
6
5
11
14
9
8
13
20
Undercounter Dispenser and Icemaker 7UC100A/7UD100A
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Interior
Reference #
Description
Part #
1
Valve, Dispense Solenoid (water option)
00957704
2
Switch, Cleaning
00957712
3
Drain/Feed Tube with Cap
00957720
4
Valve, Failsafe Solenoid
00957738
5
Compressor with Mounting Hardware
00958009
6
Condenser
00958017
7
Condenser Fan and Cord
00958025
8
Control Board with Stand-offs
00958033
9
Capacitor, Gearmotor
00958041
10
Sensor, Retainer Hardware Kit
00958066
11
Relay and Overload
00958090
12
Refrigeration, Piping Assy
00958132
13
Roller Kit, Set of 4
00924753
14
Bracket, Stop
00924795
Undercounter Dispenser and Icemaker 7UC100A/7UD100A21
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Bin Assembly
9
3
4
5
6
2
1
7
8
22
Undercounter Dispenser and Icemaker 7UC100A/7UD100A
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Bin Assembly
Reference #
Description
Part #
1
Ice Chute Assembly
00957670
2
Ice Transport Tubing with Insulation
00957746
3
Switch, Shuttle
00957753
4
Shuttle, Complete Assy
00957761
5
Lid, Bin Assy
00957779
6
Bin, Assy
00957787
7
Auger, Dispense
00957795
8
Motor, Dispense
00957803
9
Cap and Insulation, Bin
00957936
Not Shown
For serial numbers D17619 and below:
Bin Cap
00931519
Ice Chute
00927210
Chute Adapter
00926550
Undercounter Dispenser and Icemaker 7UC100A/7UD100A23
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Evaporator Assembly
10
11
12
13
14
13
2
8
5
6
3
1
7
4
9
24
Undercounter Dispenser and Icemaker 7UC100A/7UD100A
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Evaporator Assembly
Reference #
Description
Part #
1
Gearmotor
00957811
2
Main Housing with Front Seal and Screws
00957829
3
Screws, Main Housing
00957837
4
Auger with front seal
00957845
5
Ice Compression Nozzle Assy
00957852
6
Front Seal and O-Ring
00957860
7
Evaporator Assembly with Insulation
00957878
8
Housing, Bushing with Insulation
00957886
9
Hardware kit, Gearmotor
00957894
10
Reservoir and Float Complete Assy
00957902
11
Lid, Reservoir with Insulation and O-Ring
00957910
12
Float Valve
00957928
13
“T” Fitting - 1/4"
502923
14
Tubing - 1/4"
502079
Miscellaneous
Reference #
Description
Part #
Not Shown
Water filter cartridge, 5 micron
00968107
Not Shown
Cleaning and sanitizing kit, single use
00979856
Not Shown
SafeClean, case of 24
00132001
Not Shown
IMS II sanitizer concentrate, 16 oz
00979674
Undercounter Dispenser and Icemaker 7UC100A/7UD100A25
26
Undercounter Dispenser and Icemaker 7UC100A/7UD100A
Undercounter Dispenser and Icemaker 7UC100A/7UD100A27
SafeCLEAN is a trademark of Follett Corporation.
Chewblet and Follett are registered trademarks, and Horizon is a trademark of Follett Corporation, registered in US.
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
00966879R06
© Follet Corporation 5/13
Download PDF
Similar pages