W arewashing Multi-rinse Rack T ype, V entless heat

ITEM #
MODEL #
Warewashing
Multi-rinse Rack Type, Ventless
heat pump, Automatic Descaling
Cycle, electric, 250r/h, left>right
NAME #
SIS #
AIA #
Main Features
536011 (ZMR25NELV)
Short Form Specification
Item No.
Unit to be Zanussi multi-rinse rack type dishwasher. Operating direction __ left to right or
__ right to left. Featured built-in Ventless Heat pump captures energy from the extracted
air to heat up incoming cold water to wash tank and boiler. Automatic Descaling Cycle descales the whole hydraulic circuit and all washing & rinsing chambers. Multi-rinse area
with built-in ACTIVE Guaranteed Rinse System and rinse booster pump guarantees constant
rinse pressure. Multi-stage Advanced Filtering System removes majority of soil from the
wash water to ensure clean water for long time. Included large pre-wash zone works with
cold water of max. 40°C. Extended wash arms are positioned along the full length of the
wash tank. Powerful wash pump and specially designed wash spray arms guarantee
cleaning. Washing is done with water circulating at 55-65°C. Final rinsing is done with
clean water heated up to 85°C that is re-used in several phases in pre-rinse at around 70°
C. Multi-rinse with double rinse tanks and multi rinse arms re-uses rinsing water several
times to ensure hygiene on washed wares. Constant 0.4 liter/rack rinse water consumption
of cold water in any conveyor speed. Three conveyor speeds are selectable by the operator,
one for maximum capacity, one compliant to DIN 10510 and one certified according to
NSF/ANSI 3. Intuitive touch screen control panel provides easy communication on different
levels. Easy drain of water done through control panel. Standard end of the day self cleaning
cycle and sanitation cycle both including internal side of the door. Modularity allows split
delivery, customization and upgrade on-site and over time.
APPROVAL:
Zanussi Professional
www.zanussiprofessional.com
zanussiprofessional@electrolux.com
Warewashing
Multi-rinse Rack Type, Ventless heat pump, Automatic
Descaling Cycle, electric, 250r/h, left>right
Multi rinse Rack Type, 250
racks/hour, electric, left>right,
ventless heat pump, large prewash, ACTIVE guaranteed
rinse system, constant rinse,
self cleaning, automatic
descaling, advanced filtering
system, touch screen, variable
speed, insulated doors
• Built-in Ventless Heat Pump transfers the heat captured from
the extracted air to heat up incoming cold water to both fill
the water tank and rinse, thus saving significantly energy.
The humidity, volume and temperature of the exhaust air is
reduced dramatically at the same time so no ventilation hood
is needed for the machine (depending on local regulation
and condition in compliance with VDI 2052).
• Automatic Descaling Cycle ensures total scale removal from
the boiler, the hydraulic circuit, the washing chamber and
the rinsing chamber allowing ultimate performances and
lower energy comsumption thanks to highly efficient heating
elements.
• Multi-rinse technology guarantees rinse water consumption
of 0.4 liters/rack regardless of the conveyor speed to ensure
low energy, water, detergent and rinse aid consumption.
• Multi-stage Advanced Filtering System removes soil from
the wash water providing cleaner water and highly active
detergent thus ensuring better washing performance and
lower running costs.
• Built-in ACTIVE Guaranteed Rinse System is sized to raise
water temperature to a minimum of 84°C for sanitizing rinse.
No external boiler is required. Built-in air break and rinse
booster pump ensure constant temperature and pressure
throughout the rinsing cycle regardless of the inlet water
condition.
• Maximum capacity per hour of 250 racks easy to switch to
DIN 10510 or NSF ANSI 3 compliant speed.
• Three conveyor speeds can be selected through the control
panel by the operator and customized on site.
• Pre-wash section uses cold water so food remains are not
"baked" onto the plates in order to have better pre-wash
performance.
• Extended wash arms are positioned along the full length of
the wash tank.
• Multi-rinse arms in combination with double rinse tanks reuse final rinsing water in several phases to ensure hygiene
and complete detergent removal on the washed wares.
• Auto-start/stop equipped in different zones ensures that the
zone runs only when a rack is passing through it. This
reduces water, energy, chemical consumption and noise.
• Built-in drain valve in the tanks allows automatic dump and
fill to refresh the water in the tank without any interruption
of the washing process.
• Intuitive touch screen control panel features user-friendly
display to easily operate the machine and to monitor
machine status. Three different levels of interaction are
available each show relevant messages and information to
the operator, the general maintenance staff and the
authorized service partners.
• Automatic drain, clean and sanitize cycles featured as
standard. The internal chambers, including the internal
doors are completely cleaned or sanitized avoiding bacteria
proliferation for maximum hygiene and reducing manual
work/time for operator.
• Self-draining wash pumps provide maximum hygiene and
all wash and rinse zones drain automatically at the push of
a button.
• All internal components: wash and rinse arms, tank filters,
curtains can be easily removed for cleaning.
• IP25 protection against water jets, solid objects and small
animals (larger than 6 mm).
• Large counter balanced inspection doors allow unrestricted
Warewashing
Multi-rinse Rack Type, Ventless heat
pump, Automatic Descaling Cycle,
electric, 250r/h, left>right
•
•
•
•
all-round access to the wash and rinse area. Door is insulated with
injected foam. This adds strength as well as reduces noise and
heat loss.
Adjustable feet for full access underneath the machine for cleaning.
Splashhoods at both entrance and exit avoid water spilling outside
the machine.
Unit equipped with USB port making it simple to read data such
as machine identification, counters and consumption,
components, devices and alarm logs. Machine parameters can be
uploaded and downloaded and firmware updated.
Automatic back-up mode is activated when a failure occurs. Guided
troubleshooting for fast fixes including 300 precises notifications
and 23 easy-to-follow processes.
Construction
• Modularity design allows the machine not only be disassembled
for delivery and re-assembled at customer’s site, but also to be
customized and upgraded on-site and over time.
• All main components made in heavy duty anti-corrosive 304 type
stainless steel: external front, side panels and internal chambers,
wash and rinse arms, doors and rack transportation system.
• Dishwasher structure is held together with a solid 50 x 50 mm
stainless steel frame to provide long-term sturdiness.
• All electric components are put in one IP65 central box isolated
from water and steam to ensure high reliability.
• External pre-arrangement for inlet water, drain water, detergent &
rinse aid connections for fast and easy installation on both sides
of the unit.
• Deep drawn pressed wash tank with fully rounded corners, sloped
towards the drain to prevent dirt build up provides fast drainage
in only a few minutes. Pressed wash tank with no welded points
offer a guaranteed water tight solution.
• The unit is built on modularity concept for easy to add pre-wash,
wash and up to 2 dryer modules onsite.
• All chambers without internal pipes and therefore no hidden dirt
traps.
Included Accessories
• 1 of Kit delime for rack type
• 1 of Kit water meter
PNC 865282
PNC 865286
Optional Accessories
• Medium hot air blower zone without door for
PNC 534056 ❑
Zanussi multi-rinse Rack Type Dishwasher
• Corner drying zone for Zanussi multi-rinse Rack
PNC 534057 ❑
Type Dishwasher
• Medium pre-wash zone for Zanussi multi-rinse
PNC 535033 ❑
Rack Type Dishwasher with Ventless Heat Pump,
Automatic Descaling Cycle
• Large pre-wash zone for Zanussi multi-rinse Rack PNC 535035 ❑
Type Dishwasher with Ventless Heat Pump and
Automatic Descaling Cycle
• Medium drying zone with door for Zanussi multi- PNC 535038 ❑
rinse Rack Type Dishwasher
• Large drying zone with door for Zanussi multi-rinse PNC 535039 ❑
Rack Type Dishwasher
• Kit of 12 stainless steel plugs for washing arms of PNC 864239 ❑
modular and compact rack type
• Kit to adapt motorized table with green&clean Rack PNC 865232 ❑
Type - Europe, UK, M.E., Africa, Asia, Latin America,
Oceania
• Inclined plate for roller conveyor
PNC 865253 ❑
• Inclined side for splash hood
PNC 865254 ❑
• Kit to convert pre-wash module to wash module
PNC 865281 ❑
• Kit electronic connection for motorized table
PNC 865290 ❑
• Kit of splash panel to change on the splash hood for PNC 865291 ❑
90° curve table
• HACCP connection for multi-rinse Rack type
PNC 865490 ❑
Warewashing
Multi-rinse Rack Type, Ventless heat pump, Automatic Descaling Cycle,
electric, 250r/h, left>right
The company reserves the right to make modifications to the products
without prior notice. All information correct at time of printing.
2018.01.31
Warewashing
Multi-rinse Rack Type, Ventless heat
pump, Automatic Descaling Cycle,
electric, 250r/h, left>right
Electric
Supply voltage:
380-415 V/3N ph/50 Hz
Default Installed Power:
27.4 kW
Electrical power min:
20.8 kW
When the machine runs at DIN 10510 compliant speed.
Energy consumption:
21.9 kW/h
At average working conditions.
Pre-wash tank heating
elements:
14 kW
Wash tank heating elements:
7 kW
Triple tank heating elements:
3.5 kW
Boiler heating elements:
Pre-wash pump size:
1.5 kW
Wash pump size:
Rinse pump size (final, duo,
triple):
0.55 / 0.32 / 0.32 kW
Water:
Inlet water line size:
G 3/4"
Inlet cold water line size:
G 3/4"
Drain line size:
50mm
Inlet water supply pressure:
2-7 bar
Inlet water supply temperature
(wash):
5 - 65°C
The higher the temperature, the faster the warm-up.
Recommended temperature: 50°C.
Inlet water supply temperature
(rinse and pre-wash):
5 - 30 °C
Inlet water supply hardness:
0-14 °fH / 0-8°dH
When below 7°fH/4°dH special detergent and rinse aid are
needed.
Flow rate of wash pump:
500 l/h
Peak rate of drain flow:
1.8 l/s
Pre-wash tank size:
70 l
Wash tank size:
70 l
Duo rinse tank size:
20 l
Triple rinse tank size:
20 l
Duo rinse temperature:
75 - 80 °C
Final rinse temperature:
85 °C
External dimensions, Width:
3270 mm
For transportation purpose only, the height can be reduced to 2000mm
by adjusting the feet and removing the fan on the top.
External dimensions, Height:
2100 mm
External dimensions, Depth:
895 mm
For transportation purpose only, the depth can be reduced to 795mm
by removing the control box and the door handles.
Net weight:
764.15 kg
Shipping weight:
912 kg
Shipping height:
2260 mm
Shipping width:
3442 mm
Shipping depth:
1035 mm
Shipping volume:
8.11 m³
Noise level:
62 dBA
Reference norm used to measure the noise: IEC60335-2-58 annex AA.
Table to table distance:
3270 mm
Air Emission:
Air flow (top):
700 m³/h
Air temperature (top):
23.5 °C
Air humidity (top):
95 % r.h.
The data is measured at exhaust points at 25°C and 60% r.h. ambient
conditions, 18°C inlet water temperature and refer only to the machine.
Latent heat:
3100 W
Sensible heat:
3700 W
According to VDI 2052, this model does not require any dedicated
ventilation hood. General ventilation for the room should still be
provided in accordance with UNI ISO EN 7730 norm, VDI 2052
guideline and DW/172 UK regulation or local regulations.
Key Information:
Rinse water consumption:
Rinse water consumption at
max. speed:
Productivity per hour (max
speed):
Productivity per hour (DIN
compliant speed):
Productivity per hour (NSF
compliant speed):
Height with door open:
Charging hole size (width):
Charging hole size (height):
Pre-wash temperature:
Wash temperature:
Triple rinse temperature:
Duo rinse temperature:
0.4 l/rack constant
100 l/h
250 racks / 4500 dishes
168 racks / 3024 dishes
150 racks / 2700 dishes
2100 mm
530 mm
490 mm
10 - 40 °C
55 - 65 °C
70 - 75 °C
75 - 80 °C
Warewashing
Multi-rinse Rack Type, Ventless heat pump, Automatic Descaling Cycle,
electric, 250r/h, left>right
The company reserves the right to make modifications to the products
without prior notice. All information correct at time of printing.
2018.01.31
Warewashing
Multi-rinse Rack Type, Ventless heat
pump, Automatic Descaling Cycle,
electric, 250r/h, left>right
Front
Side
CWI
D
EI
EO
EQ
ES
U
V
=
=
=
=
=
=
=
=
Cold Water Inlet
Drain
Electrical inlet (power)
Electrical Outlet
Equipotential screw
Electrical signal IN/OUT
USB port
Air vents
WI
XD
XI
XP
XR
=
=
=
=
=
Water inlet
Detergent connection
Chemicals inlet (generic)
Chemical probe/sensor
Rinse aid connection
Top
Warewashing
Multi-rinse Rack Type, Ventless heat pump, Automatic Descaling Cycle,
electric, 250r/h, left>right
The company reserves the right to make modifications to the products
without prior notice. All information correct at time of printing.
2018.01.31
Warewashing
Multi-rinse Rack Type, Ventless heat
pump, Automatic Descaling Cycle,
electric, 250r/h, left>right
RECOMMENDED TABLE CONNECTION
0m
54
= =
= =
50 mm
m
300 mm
3230 ...... 1780 mm
m
7m
52
34 7/16”
875 mm
Level
508 mm
for service
508 mm
for service
Silicone
180 mm
Apply silicone between the machine and the table and make sure that there are not any water leakages.
315 mm
45 mm
45 mm
180 mm
210 mm
540 mm
45 mm
53,5 mm
6,5 mm
53,5 mm
210 mm
10 mm
8 mm
50 mm
ø=
6
m
527 mm
m
35 mm
(3
x)
45°
6,5 mm
All tables must be connected to the dishwashing units according to local regulations and industry standards
which may differ from the recommendations herein suggested. Electrolux Professional is not liable for any
failure in complying with local design standards.
DOC. NO. 59566N600
EDITION 02.2017
Warewashing
Multi-rinse Rack Type, Ventless heat pump, Automatic Descaling Cycle,
electric, 250r/h, left>right
The company reserves the right to make modifications to the products
without prior notice. All information correct at time of printing.
2018.01.31
Download PDF
Similar pages