Tender Notice for Supply and delivery of Laboratory Equipments

No.COL/COM/228/48/2010
High Commission of India
Colombo
***
24/07/2011
Tender Notice for Supply and delivery of Laboratory
Equipments and Vehicle to Palmyrah Development
Board
Tender Notice
High Commission of India, Colombo invites sealed quotations under the
two bid system (technical and financial) from eligible bidders for supply and
delivery of Laboratory Equipments and Vehicle to Palmyrah Development
Board
Bidders may purchase the Tender Documents from the address
mentioned below, against payment of SLR 1,000.00 (non-refundable) per
package in cash or in the form of Demand Draft drawn in favour of High
Commission of India, Colombo. These can also be downloaded from the
Mission’s website www.hcicolombo.org, in which case a draft for
SLRs.1,000/- per package drawn in favour of High Commission of India
towards the fee of tender documents may be enclosed with the technical
bid.
Address for purchase of Document: Attaché (Commerce)
High Commission of India
36-38, Galle Road, Colombo-03
Tender Date: 25 July 2011
Pre-Bid Meeting: 04 August 2011 (1130 hrs)
Last Date of Submission of Bids: 12 August 2011 (1500 hrs)
Opening of Technical Bids: 12 August 2011 (1530 hrs)
Bids (technical and financial) may be submitted in a sealed cover
marked “Tender for supply and delivery of Laboratory Equipments and
Vehicle to Palmyrah Development Board” so as to reach latest by 1500
hrs on 12 August, 2011. All tenders received after the deadline will be
rejected.
The technical bid and the financial bid documents (in duplicate)
should be sealed by the bidder in separate covers duly superscribed thus
and both these sealed covers are to be put in a bigger cover which should
also be sealed and duly superscribed. Financial bid of each package
should be sealed in separate covers duly superscribed. The bid may be
deposited with the undersigned at the High Commission of India. The bid
may include all the details and meet terms and conditions as listed in the
tender documents.
The Technical Bids will be opened in presence of authorized
representatives of bidders at 1530 hrs on 12/08/2011 in the High
Commission of India.
Attaché (Commerce)
High Commission of India
36-38, Galle Road, Colombo 3
Terms and Conditions
1.
Sealed quotations shall be submitted under the two bid system
(technical and financial) by manufacturers or authorized dealers/sales
agents of items mentioned in Annexure A (as per listed specifications)
based in Sri Lanka.
2.
The supplier needs to have service outlets in the Island and able to
attend service and repair within 2 working days (Applicable only for
Package 1 and 5).
3.
A certificate guaranteeing that adequate amount of spare parts will
be available for at least seven years including warranty period may be
provided along with the technical bid (Applicable only for Package 1 and 5).
4.
Bidders are requested to submit their bid documents (technical and
financial) – in duplicate - in a sealed cover marked “Tender for supply
and delivery of Laboratory Equipments and Vehicle to Palmyrah
Development Board” so as to reach latest by 1500 hrs on 12 August,
2011. The technical bid and financial bid should be sealed by the bidder in
separate covers duly superscribed.
5.
Financial bid of each package should be sealed in separate covers
duly superscribed and these sealed covers are put in a big cover.
6.
Technical and Financial bids both these sealed covers are to be
put in a bigger cover which should also be sealed and duly
superscribed.
7.
The bid may be submitted to Attaché (Commerce), High
Commission of India, 36-38, Galle Road, Colombo-03 and
acknowledgement obtained.
8.
OPENING OF BIDS: The Technical Bids will be opened in presence
of authorized representatives of bidders at 1530 hrs on 12/08/2011 in the
High Commission of India. After scrutiny of technical bids by the Tender
Evaluation Committee, financial bids of only those bidders who qualify the
technical evaluation will be opened at a time and date to be intimated later.
9.
EARNEST MONEY DEPOSIT (EMD): Technical bids should contain
EMD (based on the package bid for- please see paragraph 8 below and
also Annexure A) in the form of a DD/PO drawn in favour of High
Commission of India, Colombo. Alternatively, a standard bid guarantee
(format as in Annexure D) issued by a commercial bank or an insurance
agency approved by the Central Bank of Sri Lanka, in favour of the High
Commission of India, Colombo of this amount may be provided. The Bid
Guarantee of all unsuccessful bidders will be released after the tender is
finalized. The Bid Guarantee should be valid for a minimum period of 135
days from the date of close of tenders. Earnest Money Deposit/ Bid
Guarantee must be submitted with the technical bids (in the same
envelope) otherwise the bid will be rejected.
10. PACKAGES FOR BIDDING: Bidders may bid for one or more of the
packages as listed in Annexure A. The EMD payments may be made
accordingly. The bidders who wish to bid for more than one package can
submit one EMD valued the total of each package. A copy of such EMD
should be attached with the technical bid of each package.
Package
ONE (Laboratory Equipment)
TWO (Laboratory Chemicals)
THREE (Laboratory Glassware)
FOUR (Laboratory Furniture)
FIVE (Vehicle)
EMD (in Sri Lankan
rupees)
1,000,000.00
200,000.00
300,000.00
200,000.00
500,000.00
11. VALIDITY AND CURRENCY OF BIDS: All bids shall hold good for
acceptance for a minimum period of 90 days from the date of closing of
tender. The price quoted in the Price Schedule Form (at Annexure B)
should be in Sri Lankan Rupees and written clearly in ink or typewritten.
The total amount of the bid should be given in words as well as in figures.
12. PRICE QUOTATIONS: The price as quoted in the Price Schedule
Forms (Annexure B) should be as of point of delivery. The price both
exclusive and inclusive of all taxes, duties and levies etc must be quoted.
The taxes, duties and levies etc as applicable may be quoted separately.
The VAT Registration number should be indicated, if registered for VAT.
Otherwise, the tender is liable to be rejected. If the bidder is not registered
for payment of VAT, a certificate to that effect, obtained from the
Commissioner General of Inland Revenue, should be annexed to the
tender.
13.
The bidder may provide the following:
With the Technical Bid:
(i)
Self-attested photo-copy of registration of the company/firm/
proprietorship with the concerned Sri Lankan / Indian authorities.
(ii)
Annual Report (where statutorily required to be filed), and
Financial Reports for the last 3 years, preferably audited ones.
(iii) The bidder should have completed at least 3 projects in Sri
Lanka or India and each exceeding the value of 2/3 of the proposed
amount. A copy of such purchase order should be attached with the
technical bid
(iv) Manufacturer’s authorization letter authorizing the bidder to
supply the goods.
(v)
Documentary evidence to establish conformity of the goods to
the technical specifications in the bidding documents along with the
Technical Specification Form (Annexure A).
(vi)
Documents and information as required in the Manufacturers
Authorization Form (Annexure C)
(vii) All the equipments supplied under package one, two and three
should be ISO certified. GPM and DIN Certification are also
acceptable to chemicals and glassware respectively. A certified copy
of such registration should be submitted with the technical bid.
(viii) A letter from Manufacturer confirming that the supplied
chemicals are in sealed packs, fresh and have long expiry date.
(ix) EMD as mentioned in paragraph 7 above (the bid will be
rejected if the EMD is not submitted in the Technical Bid
envelope)
With the Financial Bid:
(i)
Price quotation in the Price Schedule Forms (as in Annexure
B)
14. Any alteration or deletions in the bid should be authenticated by the
full signature of the bidder.
15. The supplier should have good and safe storage facilities from import
to deliver the chemicals to end-user. Samples may be provided on demand
if required. The chemical supplier should be able to bid for complete
package.
16. Glassware should be manufactured using borosilicate glass or better
material with the following information embalmed.
a. Brand
b. Nominal capacity
c. Class degree
d. Calibration temperature
e. Possible error limits
17.
Calibration certificate for glassware should be provided on request.
18. High Commission of India reserves right to reject bids from
companies who are blacklisted by Government of Sri Lanka or Government
of India.
19. For each equipment installed under Package one, the supplier is
required to train the designated technical staff to enable them to effectively
operate the system.
20. WARRANTY: The Supplier shall provide on-site warranty for
Laboratory equipments (Package-01) and Two year warranty for Vehicle
(Package-05). In the event of any correction of defects or replacement of
defective material during the warranty period, the warranty for the
corrected/replaced material shall be extended to a further period as
originally agreed. Suppliers shall ensure the availability of after sales
service for a period of at least seven years including warranty period for
Laboratory equipment and Vehicle. The warranty period shall be two year
for laboratory equipment. Supplier shall also carry sufficient inventories to
assure ex-stock supply of consumables and spares in Sri Lanka. All
charges with regard to the supply of spare parts, labour, travel, per
diem and accommodation to supplier’s staff etc. shall be borne by the
supplier during the period of warranty. No additional expenditure for
services rendered during the above period will be paid.
21. PERFORMANCE GUARANTEE: The successful bidder shall submit,
within fourteen working days after the award of tender, a Performance
Guarantee provided by a commercial bank or an insurance agency
approved by the Central Bank of Sri Lanka, of an amount equal to ten
percent (10%) of the value of order, drawn in favour of the High
Commission of India, Colombo for the due execution of the contract within
the specified period. The Performance Guarantee should be valid for a
period of 120 days from the date of award. If the Performance Guarantee
is not submitted within 14 days of the letter of award, the award will be
cancelled and the Guarantee will be forfeited. The EMD of the bidder,
whose tender is accepted, will be discharged when the said bidder’s
Performance Guarantee has been accepted.
22. DELIVERY AND INSTALLATION: The successful bidder must
complete delivery, as stipulated above, of the items within a period of
90 days from the issue of Purchase Order. It is required to install them
at the Palmyrah Development Board in Jaffna. Payment will be done
only after successful supply and installation of equipment at designated
place in Jaffna. Breakage, if any, in transit during the supply period shall be
the responsibility of the supplier and should be replaced free of cost. The
exact place to be supplied there will be intimated later. If the successful
bidder fails to hand over within the stipulated period, liquidated damages @
1% of the tender amount shall be levied for a delay of each calendar week
or part thereof, subject to a maximum of 10%.
23.
MODE OF PAYMENT: Payments will be released only after the
items as tendered are handed over/delivered at designated place in Jaffna
District in perfect working condition, to the High Commission of India or its
authorized representative and physical verification of the supplies, as also
technical verification has been carried out by a competent team authorized
by the Government of Sri Lanka/ High Commission of India. Upon
completion of delivery, the items will be inspected and defect, shortcomings
or non-conformity to specifications, if any, will be brought to the notice of
the Bidder who should take immediate action to rectify those within seven
days.
24. RETENTION MONEY: Retention money to the extent of 5% of the
invoice amount will be retained up to the warranty period.
25. Withholding Tax will be deducted as per Section 153, 155 and 160 of
the Inland Revenue Act. No. 10 of 2006.
26. ACCEPTANCE OF TENDERS: The Tender Evaluation Committee
reserves the right to reject any or all tenders or accept any tender or a part
thereof without assigning any reason whatsoever.
****
Annexure A : Specification for Supplies
Package ONE : Laboratory Equipment
EMD = 1,000,000
Nr Equipment and
Instrument
1
Auto clave
Specification
Essential Specifications & Features
1. Chamber Size : 300 to 500mm x 700 to 1000mm (D x H)
2. Capacity: 50 to 70 liters
3. Temperature setting :1050C to 135oC
4. Chamber material : Stainless Steel
5. Safety Device: Low Water automatic cut Off, Safety Valve, Release Valve
6. Power Consumption: 240V AC, 50 Hz/2.5 KW
7. Microprocessor control digital Pressure & Temperatures display
8. Should have pre-heating programme
Desirable Specifications & Features
1. Accessories: Sterilization Basket 01 to 02 No
2. Emergency Exhaust Valve, Door Safety Catcher.
2
Bench centrifuge
The most
appropriat
e answer
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Yes
No
Require
d
Number
02
Essential Specifications & Features
1.
2.
3.
4.
5.
Should have at least 6000rpm or better.
Capacity should be 8 x 15ml or better.
Should have a timer.
Safety shutout should available.
Safety locking and inter switching should available for automatic shutout of motor
when lid opening during operation.
6. Safety devices should available to prevent the centrifuge from starting accidentally
02
Desirable Specifications & Features
1. Comply with international safety standards like ISO, CE and FDA
3
Refractometer
LED digital display
Measuring Range: 0 to 95 Brick
To measure brick value of soft drinks, Treacle, and Fruit Pulp
Readability: 0.1% or better
Accuracy: 0.05% or better
Desirable Specifications & Features
1. Automatic Temperature Compensation
Dissolved oxygen
meter
1)
2.
3.
4.
6.
7.
8.
Hydrometer
DO Range: 0 to 20.0 mg/l
DO Resolution: 0.01 or 0.1 mg/l
DO Accuracy: +1%
Power: AA Batteries, Minimum 500 hrs continuous operation or direct AC power
supply
Dissolved Oxygen Meter to measure the Dissolved Oxygen in the laboratory as well as
field.
The unit should be complete working unit.
If any accessories or consumable required for instrument operation it should be quoted
Water Proof: 100 % Water proof
Laboratory
Thermometer
No
No
No
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
02
Yes
No
10
Yes
No
10
Yes
No
01
Essential Specifications & Features
1. To measure the specific gravity of Soft drinks (higher than water density)
6
Yes
Yes
Yes
Yes
Yes
Essential Specifications & Features
5.
5
No
Essential Specifications & Features
1.
2.
3.
4.
5.
4
Yes
Essential Specifications & Features
1. Measure up to 10000C
Desirable Specifications & Features
1. Thermo couple
7
8
Thermostatic
water bath:
Essential Specifications & Features
Water still
Essential Specifications & Features
1. Stainless Steel Molded (weld free) Square Tank
2. Capacity: 22 Liters or better
3. Temp. Control: Better temperature control
4. Temp Setting: Digital Temperature setting
5. Digital Temperature read out
6. Temp. Range: Ambient to 99.9oC
7. Temp. Stability: +0.01oC or better
8. Temp. Uniformity: +0.01oC or better
9. Timer: Timer should be available
10. Power Supply: 230V, 50 Hz
11. Heater: Immersion type Heating Element with Temperature
12. Sensor and Water Circulator
13. Should be supplied with Concentric rings and lid
1.
2.
3.
4.
5.
6.
7.
8.
9.
Distill Water Quality
Conductivity 1.0 - 2.0uS/cm approx
pH- 6.0 to 7.0
Heaters : Silica heater
Low Water Cut-off facility
Cooling Water requirement: 1.5 L per min or better
Electrical Requirement
Gate valve to prevent water wastage
Wall mounted or Bench mounted water distillation system
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
02
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
02
Yes
Yes
Yes
No
No
No
Desirable Specifications & Features
1. Safety features: Over heat protection with pre/tem switch, Heating elements
2. Flow switch for boiler safety
3. Teflon drain cock for easy maintenance
9
10
Rotary
evaporator
Kiel dhal
apparatus:
Essential Specifications & Features
1. Digital speed and temperature display
2. Water or oil bath should be supplied with integrated carry handles and heating bath
should have facility for standalone operation
3. Cooling surface should be minimum of 1200cm2 or better
4. Bath Capacity should be at least 3liters
5. System should have vertical condenser
6. Speed range should be 20 – 250 rpm or better
7. Vacuum Pump Should be a chemical resistant diaphragm vacuum pump
8. Maximum Vacuum: 10 Torre or better
9. Motor Rotation: More than 1450rpm
10. Rotary evaporator with integrated heating bath
11. System is supplied with motorized lift and should incorporate with safety stop function
12. Should have end position recognition facility to protect the glass ware breaking
13. Time function should be available.
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
Yes
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
Yes
No
01
Essential Specifications & Features
1. System should be complete with extraction hood, Stainless Steel glassware rack, and
stand for glassware handle, drop collector and heat shield
2. Also system should be used for the COD measurement by using Air refrigerators and
COD digestion tubes
3. Temp. Setting: Ambient 450oC with 1oC resolution
4. Temp. Ramp: Should be able to program for different ramp
5. Temp. Stability: +0.5 at 100oC and +2 at 400oC
6. Display: Total KJELDHAL Nitrogen
7. Should be able to use with 250 - 300 ml Sample Tubes as well as 100 - 200 ml Tubes
8. Display : Digital for Actual temperature and residual reaction time
9. Timer : 120 minutes and continuous operation, Safety & End of cycle,
10.
Indication: Acoustic signals with automatic switch off
11.
The system should be suitable for steam distillation purpose for estimation of Total
KJELDHAL Nitrogen
12.
Should be able to use with 250 - 300 ml Sample Tubes as well as 100 - 200 ml
01
Tubes
Desirable Specifications & Features
1. Visual and sound signal to indicate the end of cycle and visual signals to indicate the Yes
operating stage.
2. Facilities to interrupt cooling water supply automatically during idle periods before Yes
distillation to reduce the water consumption.
11
Calorimeter
No
No
Essential Specifications & Features
1.
2.
3.
4.
5.
6.
Programmable Temperature range at least within 37 to 165°C or better
Programmable Timer with 0 to 480 minutes range or better
Should be able to increase temperature up to 15000C with in 10 min. or better
Should have over temperature safety feature, Single block with transparent lid
Should be able to Operate Temperature 10 to 45 °C
The power requirements of the instrument shall be 230 Vac, 50 Hz.
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
Yes
Yes
No
No
Yes
No
10
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
01
02
Desirable Specifications & Features
1. The instrument could be equipped with stored digestion programs
2. System could be complies with international standard such as CE,GS
12
Timer
Essential Specifications & Features
1. Timer up to 99min.
13
Humidity meter
Essential Specifications & Features
1.
2.
3.
4.
5.
6.
7.
8.
Temperature range : -200C to 600C or better
Humidity range : 0 – 100% RH
data logging capacity for minimum of 15,000 records
Should have digital triple display
Auto power off and time function should be available.
Reading hold function, RS232 computer interface
RS 232 cable and soft ware for windows should be available
System should be supplied with probe, battery, carrying case, manual, RS 232 cable and
software.
Desirable Specifications & Features
1. User selectable 0C and 0F measurement and minimum and maximum function
14
15
Verniner caliber
gauge
Bench pH meter
Yes
No
Yes
No
02
Yes
Yes
Yes
No
No
No
02
Yes
No
Yes
Yes
Yes
No
No
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
Yes
No
Essential Specifications & Features
1. Verniner Caliper marked in mm. to measure up to 150mm.
Essential Specifications & Features
1. Bench top pH meter to measure the pH in a sample specially having low ionic strength
2. The unit should be complete working unit.
3. If any accessories or consumable required for instrument operation it should be quoted
(last calibrated date, calibration buffers and slope and mill volt in each buffer)
4. Data Storage: At least 99 data and calibration data, last calibrated date, calibration
buffers and slope and milli volt in each buffer
5. Range : pH ; 0.00 to 14.00, mV ; + 2000mV, Temperature ; -10 to 1100C or better
6. Resolution : pH ; 0.1 , 0.01, 0.001 selectable, mV; 0.1, Temperature ; 0.10C or better
7. Accuracy : pH ; +0.02, mV ; + 0.2 or + 0.05% or better
Desirable Specifications & Features
16
Electronic
analytical
balance:
1. Electrode Inputs : BNC Connector, 5 pin connector and Single pin reference Adapter
2. Data Output : RS-232 Data logging system
Essential Specifications & Features
1. It should be connected to any printer.
2. Weigh below hook for density determination should available
3. Capacity (g) – 260 or better
4. Readability (mg) – 0. 1 or better
5. Repeatability (mg) – 0.1 or better
6. Linearity (mg) - ± 0. 2 or better
7. Tare range – Full capacity by subtraction,
8. Pan size(cm)– 9 or better
9. GLP/GMP data output capability with date, time, sample ID, user ID, balance,
calibration information and weighing information
10.
Should be 2-line alphanumeric high-resolution LCD display with backlight
02
11.
12.
Should have Over load, under load and low battery indicator
Should be comply with at least ISO9001: 2000 standard
Yes
Yes
No
No
Yes
Yes
Yes
Yes
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
Desirable Specifications & Features
17
Incubator
1. Frameless draft shield with removable doors with stainless bottom
2. Calibration – External calibration User selectable multipoint calibration facility
3. Auto tare facility
4. leveling knobs at each foot for easy leveling at any surface and level indicator in front
Essential Specifications & Features
1. Double wall filled with thick mineral wool
2. Shelves: 02 Nos. or above
3. Stainless Steel Shelves with 04 or more shelf positions
4. Temp. Controller: Temperature: Ambient +5 to 100oC
5. Temperature resolution: ± 0.1oC or better
6. Temperature uniformity: ± 1.0oC or better
7. Temperature stability : ± 0.1oC or better
8. Temperature accuracy: 0.2oC or better
9. Capacity: Approx. 100 - 120 Liters or better
02
Desirable Specifications & Features
18
Filtration
assemble set
1. Bench top type Hot Air Oven for microbial studies
2. Construction: Stainless Steel Chamber with cabinet quoted in baked Enamel
Essential Specifications & Features
1. Cup capacity : 100ml or better
2. Effective filtration area : approximately 10 - 20cm
3. Filter size : 47mm or better
4. Control value : Each branch independent
5. System should supply with 100 packs of 0.45µm membrane filters
6. Vacuum pump
7. Should be oil free vacuum pump, Maximum vacuum should be 100torr (- 650mmHg) or
better
01
8. System should have 1/6HP or better
9. Noise level should be 50dB or better
10.
Motor rotation should be 1400rpm or better
11.
System should be comply with international standards such as CE approval and
system should have built in thermal protection, Suction bottle, Polycarbonate, auto
cleavable
12.
Capacity 3000ml or better
Yes
Yes
Yes
No
No
No
Yes
No
Yes
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
No
No
No
No
Desirable Specifications & Features
19
Biological
microscope
1. System complete with 3 branch manifold, suction bottle, vacuum pump and electronic
ignition burner, Manifold (3 Branched)
2. Construction: Aluminum manifold and cup made out of Stainless steel
3. System supplied with required tubing for the operation.
Essential Specifications & Features
1. Wide field 10x/20mm
2. focusable paired eyepiece with foldable eye guards
3. Should have trinocular type with observation tube 30o inclined and 3600 rotatable
viewing body
4. Quadra pole nosepiece with firm stops
5. Infinity corrected Plan phase achromatic objectives 10x20x40x100
6. LED light source with rechargeable battery and lamp life guaranty with minimum 10
years.
7. Company should have sold minimum of 100 microscopes during last 2-3 years.
8. Co-axial coarse and fine focusing mechanism, Universal power supply (100-240V) is
proffered in order to compensate for power fluctuations
Desirable Specifications & Features
1.
2.
3.
4.
Single built metal stand made of anti corrosion material
Rack and pinion movement on corrosion and wear resistant metal
Safety ratification to be printed on the body
Operation manual, service tools, cleaning cloth, lens clips, dust cover, tissue pack of 250
03
20
Sterilizer
Essential Specifications & Features
1. Capacity: 16liters or better
2. Temperature setting: 120 to 135oC
3. Chamber material : Stainless Steel
4. Power Consumption : 240V AC, 50 Hz/2.5 KW
5. Emergency Exhaust Valve, Door Safety Catcher, Temperature 1200C to 1350C
6. Should be microprocessor controlled front loading autoclave for laboratory use
7. Safety Device : Low Water automatic cut Off ( Safety Valve, Release Valve
8. Temperature programs: facility should available to programme the temperature 1200C
to 1350C
9. Preheating facility : Should available
Desirable Specifications & Features
21
Conductivity
meter
1. Accessories: Sterilization Basket 01 No or more
Essential Specifications & Features
1. Portable Conductivity/Salinity Meter to be used in field and Laboratory
2. It should have data storage facility and completely waterproof
3. Power: AA Batteries and Line Power through external Power Pack
4. Conductivity 0uS/cm to 199.9mS
5. TDS 0 to 45,000 mg/l
6. Salinity 0 to 40 mg/l (ppt)
7. Temperature –10 to 110oC
8. Resolution : Conductivity : 0.1uS; 1uS; 0.01mS; 0.1mS
9. Temperature : +0.1oC
10. Accuracy : Conductivity +0.5% of all ranges
11. Calibration Points: 1 is standard
12. Mode directly adjusts to cell constant
Desirable Specifications & Features
1. Display : Custom LCD/Backlight
2. Calibration Facility : Auto and Manual
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
Yes
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
No
No
02
02
3. Calibration Review : User-Activated; shows last calibration date, standard used
22
23
Yes
No
Soxlets
apparatus
Essential Specifications & Features
1. Should be epoxy coated stainless structure for resistant to chemicals and corrosion Yes
agents
Yes
2. Extraction thimbles should be pure cellulose
Yes
Yes
3. Should have safety devices
Yes
4. Should have microprocessor controlled electronic circuits
5. Work temperature : 100 to 2500C
Yes
6. Reproducibility- +/- 1%relative or better
Yes
7. Solvent recovery rate- 50% - 70%
Yes
8. Should have at least 25 memorizable programmes.
No
No
No
No
No
No
No
No
HPLC
Essential Specifications & Features
1. Pressure range:
1.1.
Up to 5500 psi minimum
1.2.
Degasser: In-built degasser, 4 channels
1.3.
Flow Rate: 01ul to 9900 ul in ul setting
1.4.
Composition range: 1 to 100% approx
1.5.
Composition Accuracy: + 1% or better
1.6.
Composition Precision: less than 0.2% RSD or better.
2. Detector:
2.1.
Photo Diode Array Detector
2.2.
No. of Diode : 1024 minimum
2.3.
Wavelength Range : 190 – 900 nm approx
2.4.
Accuracy : Maximum +1 nm or better
2.5.
Noise : 10 x 10-6 AU approx
2.6.
Linearity : Minimum up to 2 AU
2.7.
Flow Cell Volume: Approx. 15 ul, UV-Visible Detector,
2.8.
Wavelength Range: 190 – 900 nm approx.
2.9.
Accuracy : Maximum +1 nm or better
01
01
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
2.10.
Noise : 10 x 10-6 AU approx
Yes
2.11.
Linearity : Minimum up to 2 AU
Yes
2.12.
Flow Cell Volume : Approx. 15 ul
Yes
2.13.
Fluorescence Detector
Yes
2.14.
Wavelength Range (Excitation): 200 – 800 nm approx
Yes
2.15.
Wavelength Range (Emission): 250 –900 nm approx
Yes
2.16.
Accuracy : Maximum + 3 nm or better
Yes
2.17.
Sensitivity : >600 for H2O Raman line
Yes
2.18.
Flow Cell Volume : Approx. 10 ul
Yes
Yes
2.19.
Refractive Index Detector
2.20.
RI Range: 1.00-1.75 approx
Yes
2.21.
Noise : 5 x 10-9 RIU approx
Yes
2.22.
Linearity : 600x10-6RIU approx
Yes
2.23.
Flow Cell Volume : Approx. 10 ul
Yes
2.24.
Flow cell Temperature : ambient to 500C approx
Yes
3. Auto Sampler:
3.1.
Injection Volume range : Up to 1000 ul approx
Yes
3.2.
Should supply with 100ul Syringe
Yes
3.3.
No. of Sample : Approx. 200 x 2 /1.5 ml vials and two, 96 well plates
Yes
3.4.
Carry over : Less than 0.01%
Yes
3.5.
Repeatability : Less than 0.5% RSD
Yes
3.6.
Temperature Range : 0 – 65oC approx
Yes
4. Control System
4.1.
Fully Computer control system.
Yes
4.2.
All components i.e., Detectors,
Yes
4.3.
Auto samplers should be fully integrated as a single unit and connected to Yes
computer through single input
5. Software
5.1.
Windows based software.
Yes
5.2.
Capable of controlling all accessories.
Yes
6. Accessories
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
6.1. HPLC Vials – 200 Nos.
6.2. Power Supply : 230AC 50 Hz, Single phase
Yes
Yes
No
No
1. Quaternary gradient HPLC systems with facility to perform standard HPLC and fast Yes
Yes
HPLC
Yes
2. Both standard and fast mode could be able to operate with 04 solvents.
3. Solvent delivery system.
Yes
4. Computer
a. Latest Computer system suitable for above system with required
Yes
communication port
Yes
b. flat screen monitor
Yes
c. laser printer
d. UPS
Essential Specifications & Features
1. Single beam UV-Vis spectrophotometer
Yes
2. Wavelength Range: 190 – 1100nm or better
Yes
3. Spectral band width: 1.8nm or better
Yes
4. Stray light: 0.3%T or better
Yes
5. Measurement modes: Concentration, %T, Abs
Yes
6. Light source: Deuterium and tungsten halogen lamp
Yes
7. Base line flatness: ±0.005 Abs or better
Yes
8. Wavelength accuracy: +0.5nm or better
Yes
9. Wavelength reproducibility: +0.5 nm or better
Yes
No
No
No
Desirable Specifications & Features
24
UV
Spectrophotometer
Desirable Specifications & Features
1. System could be used as standalone system or as PC controlled system
Yes
2. Fully integrated system for instrument and accessory control, data analysis and report Yes
generation.
3. Run on windows xp Accessories
Yes
4. Optical system : Single beam optics
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
01
25
Lamina flow
Essential Specifications & Features
1. Absolute Air Filter System.
2. System shall be 99.99% efficient on removal of all aerosol particulate contaminants 0.30.5 microns and larger and shall meet or exceed the requirements
3. The Horizontal Flow Clean Bench shall contain fluorescent lamps hidden from direct
operator view that will provide a lighting intensity of 200-300 foot-candles on the work
surface.
Yes
Yes
No
No
Yes
No
Yes
Yes
No
No
5. System should be operated under 230 VAc, 50Hz power supply
6. The Horizontal Flow Clean Bench shall contain an Instrument Panel providing:
• On/Off Switch for Motor Blower
• On/Off Switch for Fluorescent Lights
• Speed Control for Blower (recessed to prevent tampering)
• The Horizontal Flow Clean Bench shall be transportable through a 40-70 inch wide
standard door and shall be completely serviceable from the front of the unit.
Yes
Yes
Yes
Yes
No
No
No
No
Yes
No
Desirable Specifications & Features
Yes
No
4. Cabinet work zone shall be enclosed with glass side panels
1. Cabinet finish could be textured, baked white enamel for easy cleaning; work surface
could be white, high impact melamine plastic (or stainless steel as purchasable option)
2. The Horizontal Flow Clean Bench could be so designed that field maintenance can be
accomplished by replacement of a module incorporated with quick-disconnects.
01
26
Magnetic stirrer
Essential Specifications & Features
1. Magnetic stirrer with heating
2. Capacity: up to 10 lit
3. Speed range: 100 - 1500 rpm
4. Heating temperature range: 50 - 500 °C
5. Heat control: LED
6. Heating plate dimensions: 180-200 x 180-200 mm.
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
Yes
Yes
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
1. Camber design: gold plated reflective interior for fast and even sample drying
Yes
2. No. Of programs stored: about 50 drying programs
Yes
3. Heating options: fast, standard, ramp, and step heating options should be available for Yes
optimization of drying proceeds
No
No
No
02
Desirable Specifications & Features
27
Moisture
determiner
1. Digital error code display
2. Ceramic top for chemical resistance
Essential Specifications & Features
1. Moisture Analysis system to check moisture content in desiccated Palmyrah fiber and
Palmyrah pulp
2. Capacity: 40-100g
3. Readability: 0.01%/0.001g or better
4. Repeatability: 0.05% or better
5. Timer: 1 to 120 minutes in10 second increment or better
6. Heater: Halogen heater
7. Temp. Range: Programmable from 50 to 200oC.
8. Display: Sample weight, % moisture, % dry solid, Temperature, time and drying curves
(online moisture loosing curve)
01
Desirable Specifications & Features
28
Muffle furnace
Essential Specifications & Features
1. System should be microprocessor control
Yes
No
01
2.
3.
4.
5.
6.
7.
8.
Maximum Temperature: 12000C Programmable or better
Capacity: 7.5liters or better
Heating Elements: Resistance thread
Heating plates: 03 heating plates or better
Door: Should have front opening door
Safety: Should have thermocouple brake to Furnaces disconnection
Power supply: Single phase 220 - 240 volts
Desirable Specifications & Features
29
30
Heating mantle
Turbidity Meter:
1. Muffle furnace to be used for ashing of samples
2. Temperature control : Digital P.I.D. controller with Temperature ramp function
3. Non volatile memory
4. Temperature Alarm
5. Locations of controls: Underneath the furnace
6. System complying with international standards such as CEE standard.
7. Housing Materiel: Metal housing with paint protection
Essential Specifications & Features
1. Temperature up to 450 0C
2. Energy regulator should be available.
Essential Specifications & Features
1. Range- 0 to 1999, 0 to 199.9, 0 to 19.99 nephelometric turbidity units
2. Resolution- 0.1% of range or better
3. Accuracy- +2% full-scale or better
4. Light source- tungsten lamp
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
Yes
Yes
No
No
02
Yes
Yes
Yes
Yes
No
No
No
No
01
31
Vacuum pump oil free
Essential Specifications & Features
1. Maximum vacuum approximately 100torr (- 650mmHg) or better
Yes
2. System should have 1/6HP or better
Yes
3. Noise level should be 50dB or better
Yes
Yes
4. Motor rotation should be 1400rpm or better.
5. Vacuum pump should be suitable for Liquid filtration of microbiology, and suspended Yes
solid tests, Vacuum pump should be oil free vacuum pump
6. Power requirement should be 230V/50Hz
Yes
No
No
No
No
No
01
No
Desirable Specifications & Features
32
Gas
Chromatograph
y
1. System complying with international standards such as CE approval and system built in
thermal protection.
Essential Specifications & Features
1. Memory - 50 or more
2. Display- Inbuilt colored touch screen display is preferred for easy programming and
viewing
3. Methods protection- By a user settable lock code
4. Gas Flow Control- Electronic flow control (EFC) of injectors and Detectors for Gas
saving.
5. Data sampling rate - 100Hz data sampling rate per channel or better
6. Column oven: Capacity- Spacious column oven preferred in order to handle more
columns easily
7. Volume 15 liters or more
8. Temperature range- From ambient +50C to 4500C. Be able to upgrade from -99oC to
450oC,
9. Heating rate- Minimum 1200C /min. (for 230Vac)
10.
Cooling Rate- Cooling down from 4000C to 500C in at least 5mins or better
including stabilization time
11.
Temperature Ramps/Holds- 20/21 or better
12.
Temperature settings- Up to 4500C with 10C resolution
13.
Injectors: No of injectors per Machine- Minimum of 3 independent injectors to be
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
Yes
Yes
Yes
Yes
No
No
No
No
Yes
Yes
Yes
No
No
No
Yes
Yes
No
No
01
operated simultaneously
14.
Split / Split less Injector
15.
Pneumatics: Electronic flow control
16.
Pressure Range: 0-150 psi (10 bar) or better
17.
Minimum Temperature: 450 0C or better
18.
Split Range: 1-10,000 or better
Yes
Yes
Yes
No
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
Desirable Specifications & Features
33
Laboratory oven
1. Microprocessor /External computer controlled gas chromatograph with the capability of
storing analytical methods through GC key pad as well as through computer.
Essential Specifications & Features
1. Stainless Steel Chamber with cabinet quoted in baked
2. Shelves: 02 Nos. or more
3. Controller: Thermostatic temperature control
4. Temperature: Ambient +5 to 250oC
5. Temperature uniformity: ± 5.0oC or better
6. Temperature stability: ± 0.5oC or better
7. Capacity: 110L or more
8. Safety devices : Over temperature automatic shut-off
Desirable Specifications & Features
1.
2.
3.
4.
5.
6.
Bench top type
Audible and visual alarm indicated by lamp
Pilot light for the observation of heater energization
air vent and Thermometer Holder
Enamel Insulation: Double wall filled with thick mineral wool
Air convention: Natural convections
01
34
Deep freezer
Essential Specifications & Features
1. Temperature Range: approximately -10oC to -100oC
2. Temperature Display: Digital, should display actual chamber temperature
3. Temperature Control: Microprocessor control
4. Compressor: Should have double compressors system to cool on any ambient
temperature
5. Volume: Approx. 386 Liters or Better
6. Insulation: Formed in-place high density insulation in the cabinet and in the door
Refrigeration.
7. Door opening Additional Safety features : In-built Automatic voltage compensator
should be provided with the instrument to ensure more consistent current flow
8. Power : 230VAC, 50Hz
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
Yes
No
Yes
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
1. Outer epoxy powder quoted outer finish and inner chamber stainless steel forced air Yes
circulation for better accuracy.
2. Alarm for indicate low and high temperature, power failure, Low voltage, Sensor defects Yes
No
01
Desirable Specifications & Features
35
Laboratory
Refrigerator
1. Protection: Audible and Visual Alarm for Over or Below temperature from the set value,
low battery, Airflow filter needs to be cleaned Upright Ultra low freezer for sample
storage
Essential Specifications & Features
1. Capacity: 350L or better
2. Temperature maintained at approximately -2 to 100C and should digital display of
average temperature and set point
3. Temperature precision should be 0.10C or better
4. Precision: 0.10C or better
5. Uniformity: 0.10C or better
6. Number of Shelves: 5 or more
7. Should be a microprocessor controlled upright refrigerator.
Desirable Specifications & Features
No
01
36
and for door opening.
3. System for data recording in case of power failure.
Digital
Essential Specifications & Features
Industrial Gauge 1. Accuracy- + 025% full-scale; Dial size-3” or 4 1/2”
2. Units of measure-, kPa, kg/cm2, Bar
3. Operating temperature-14 to 1400F (10 to 600C); Zero adjustment range.
4. Power: Battery powered
Yes
No
Yes
Yes
Yes
Yes
No
No
No
No
Yes
Yes
No
No
Yes
Yes
No
No
03
Yes
Yes
Yes
Yes
No
No
No
No
01
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
01
Yes
Yes
Yes
No
No
No
01
02
Desirable Specifications & Features
37
38
39
40
Three-Range
Brix
Refractometer
Digital Stirring
Hot Plate
Slide projector
Over head
projector
1. Manual adjustment using menu
2. Display - 5 digit
Essential Specifications & Features
1. It is ideal for measuring achromatic samples over a wide range of sugar concentrations.
2. This refractometer incorporates a three-stage switching knob, a color-adjustment knob,
and a temperature correction thermometer to ensure accurate readings.
Essential Specifications & Features
1. Top plate Material-Aluminum
2. Heating Temperature range - 122 to 5900F (50 to 3100C)
3. Stirring Speed range - 50 to 1200rpm
4. Max Capacity - 20L
Essential Specifications & Features
1. Lens not included with projector
2. Remote forward and reverse,
3. Improved corner-to-center illumination
4. Long-life lamp
5. Built-in handle, accessory outlet
Essential Specifications & Features
1. Convenient digital clock keeps track of meetings
2. Power-cord wrap
3. Lamp-interrupt switch shuts off power to lamp when changing to prevent premature
41
42
43
Spray drier
UV lamp (250 300nm)
Water
Purification
System:
failure
4. Carrying handle
5. Fold-down post.
Essential Specifications & Features
Yes
Yes
No
No
1. Spray drying transforms a liquid foodstuff into dry powder.
2. The process involves the atomization of liquid into a spray using either rotary or nozzle
atomizers.
3. The spray is contacted with hot air entering the drying chamber through a roof air disperser.
4. Evaporation of moisture, particle formation, and drying proceed under controlled conditions of
low product temperature processing.
5. The product is discharged continuously from the drying chamber and fines entrained in the
exhaust air are recovered in cyclones.
6. Operating temperatures and spray dyer designs are selected according to the powder
specification and drying characteristics.
7. Spray dryers for food products often feature vibrating fluid bed attachments for powder
moisture content adjustment, agglomeration or cooling.
Yes
Yes
No
No
Yes
Yes
No
No
Yes
No
Yes
No
Yes
No
Yes
Yes
Yes
No
No
No
01
Yes
Yes
Yes
No
No
No
01
Yes
No
Yes
Yes
No
No
Essential Specifications & Features
1. Inspection of thin-layer chromatograms and other objects in an undarkened room
2. A glass filter in the viewing window protects the eyes against reflected short-wave UV
light
3. Made from shock-resistant plastic.
Essential Specifications & Features
1. Flow rate should be at least 1.0L/min
2. Conductivity should be approximately 0.1 – 1.0 μS/cm
3. Percentage membrane retention of germs, bacteria, and particles should be
approximately 99%.
4. Should have in built pretreatment system inclusive of activated carbon and hardness
stabilization with reverse osmosis module
5. Should have a storage tank of approximately 6 liters
6. Power: 230V/50Hz, Should have automatic water recalculation through the dispenser
tubing to protect it from internal bacteria growth
01
7. Should be microprocessor control system
Yes
8. Should have real-time clock and code protected operating system
Yes
9. Should have purification set consist of highly pure absorptive material and ion exchange Yes
resin,
44
45
Viscosity meter:
Trible beam
balance:
Desirable Specifications & Features
10. Alphanumeric LCD display
11. An ergonomic controlling unit that can be swiveled for best keypad use and dazzle-free
readability with IP 54 protection,
12. RS 232 interface for data communication,
13. System supply with two sets of pre filtration cartridges and ion exchange cartridges.
Essential Specifications & Features
1. Continuous display of: Viscosity (cP or mPa·s)
2. Temperature (°C or °F), Shear Rate, Shear Stress, % Torque, Spindle
3. Torque measurement accuracy: 1% of full scale range
4. Repeatability: 0.2% of full scale range; More than 50 selectable speeds provide superior
range of viscosity/shear measurements for use in stand-alone operation.
5. Automate program control by PC
6. Automatic data collection and historical comparison with optional software
7. Auto-zero function to ensure precision torque measurement
8. Parallel printer and analog voltage outputs
Desirable Specifications & Features
1. Easy-to-use keypad for simple
2. Election of test parameters
3. Customizable options
Essential Specifications & Features
1. Should have three notched tiered beams with center reading
2. Should have spring loaded zero adjust compensator
Technical specifications
3. Capacity - 610g or more
No
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
No
No
No
No
Yes
Yes
Yes
Yes
No
No
No
No
Yes
Yes
Yes
No
No
No
Yes
Yes
No
No
Yes
No
01
01
46
47
48
49
Large-Capacity
Console
Humidifier with
Air Filter:
Compact
Dehumidifiers:
Multipurpose
Burners:
Vacuum packing
machine - Table
top model:
4. Capacity with accessory weight - 2610g or more
5. Readability - 0.1 g or more
6. Platform - Approximately 15cm
7. Calibration - Front Beam-10g x 0.1g or better
8. Middle Beam - 500gX100g or better
9. Rear Beam- 100g x 10g or better
Essential Specifications & Features
1. Holding capacity- 5 ½ gallons or more
2. Output per day- 13 gallons or more
3. Humidifies- 2700sq.feet or more
Essential Specifications & Features
1. Holding capacity- 3 to 5 gallons
2. Control panel- Digital.
Essential Specifications & Features
1. Gas type- LP Gas
2. Output – 2000 to 3200 BTU/hr
3. Inlet OD – 6 to 8mm
4. Height – 15 to 20mm.
Essential Specifications & Features
1. Inert Gas Flushing Arrangement
2. Bi-Active Seal
3. Parallel Seal
4. Pneumatically Operated Sealing Jaws
5. Compressed Air System for Pneumatically Operated Sealing Jaws
6. Digital Microprocessor Control.
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
Yes
Yes
Yes
No
No
No
02
Yes
Yes
No
No
02
Yes
Yes
Yes
Yes
No
No
No
No
08
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
02
Yes
No
Yes
Yes
No
No
Desirable Specifications & Features
50
Homogenizer:
1. Additional Seal Pressure Arrangement
Essential Specifications & Features
1. System should be suitable for the dispensing
2. homogenizing and mixing of biological samples
01
51
Ebullo meter:
3. Shaft should be made of stainless steel and should have high resistance and durability
4. Should be able to use volumes up to 10 liters
5. Construction material should be techno polymer
6. Maximum stirring speed 40,000 rpm or more
7. Maximum viscosity 1000mPaS or better
Essential Specifications & Features
1. Electronically regulate heating
2. Stable boiling temperature; Continuous cooling
3. Total visibility of the operation
4. Results obtained in approximately 6 min. after the boiling point of water or wine
5. Application for Sweet wines titration
6. Thermoscope meter.
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
Yes
Yes
Yes
Yes
No
No
No
No
Desirable Specifications & Features
Application for:1. Fruit crèmes titration
2. Vinegar titration
3. Ciders and pommels titration
4. Beer titration
01
52
Yeast separate
centrifuge:
Essential Specifications & Features
1. Should be able to accommodate at least 100 Nos. of 5ml tubes of flat or round bottom,
tubes, at approximately 4500 rpm or better in a swing out rotor
2. Loaded centrifugal force shall be at least 3800g
3. Should be a microprocessor control system and should be able to control speed, time,
temperature and gravitational field
4. Speed and time should be able increase in 1 unit
5. Temperature Range: -10 to 400C
6. Should have pneumatic swing support for easy and safe lid opening.
7. Should have a timer with minimum of 11 hrs or better.
8. Power should be 230V/50Hz.
9. The system should consist of all required accessories such as rotors, Baskets, lids tube
carriers and tubes to make it a workable system.
10. Should display linear acceleration and deceleration curves to monitor the operation.
11. Should have imbalance switch and auto lid opening as safety features.
12. Chamber should be stainless steel
Yes
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
Yes
Yes
Yes
No
No
No
Desirable Specifications & Features
1. Compatible with both swing out and angle rotors to use in different applications.
Yes
2. System have 1-knob control units with "turn and push" operation for easy and user Yes
friendly operation.
3. Brushless induction drives motor.
Yes
Signature of the Bidder ………………………
………………………………………….
(Common Seal of the Company)
Name & address of the Company - …………………………………….…………….……
………………………………………………………..
……………………………………………………….
……………………………………………………….
No
No
No
01
Annexure A : Specification for Supplies
Package TWO: Laboratory Chemicals
EMD = SLR 200,000
Nr
Chemical
Specification
The most
appropriat
e answer
1
Organic Solvents
Ethanol
Absolute, 99.8%,
Yes
No
2
Ethanol(Repaced)
Not applicable
Yes
No
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Methanol ( AR )
Yes
No
Acetone ( AR )
Chloroform ( AR ),
Not applicable
Not applicable
Not applicable
Yes
No
Yes
1,2-Dichloroethane
Toluene ( AR )
ACS reagent, ≥99.5%
Not applicable
Diehyl ether (stabilized( LR)
Petroleum ether (AR)
Acetaldehyde
Aniline
Benzene ( AR ),
Benzaldehyde
Chlorobezene ( AR )
Cyclohexane ( AR )
Cyclohexanol
Required Number
Pack Size
Quantity
Essential Specifications & Features
2.5
L
2.5
L
500 ml
3
9
No
2.5L
500 ml
15
Yes
No
1L
2
Yes
No
2.5L
3
Not applicable
40 - 600 C
Reagent Plus®, 99%
Reagent Plus®, 99%
Not applicable
Reagent Plus®, ≥99%
Yes
No
2.5L
7
Yes
No
2.5L
2
Yes
No
1L
3
Yes
No
1L
8
Yes
No
2.5L
4
Yes
No
2
Not applicable
Not applicable
Yes
No
1L
500ml
Yes
No
2.5L
2
Reagent Plus®, 99%
Yes
No
1L
5
9
8
6
17
18
19
20
21
22
Cyclohexanone
N,N-Dimethylformamide
Dichloromethane ( AR )
Fehling Solution No. 1
Fehling Solution No. 2
Formaldehyde solution
23
Glycerol
24
25
Acetonitrile ( AR )
L-Ascorbic acid, A.R.
26
27
28
29
30
31
32
33
34
35
Organic Chemicals
D-(+)-Glucose
Sucrose, A.R.
Sodium acetate
Potassium
sodium
tartrate,
tetrahydrate AR
Citric acid
Oxalic acid A.R.
Stearic acid
Ethylenediaminetetraacetic acid,
A.R.
Urea
Starch solution
Yes
≥99.5% (GC)
Yes
≥99% (GC)
Yes
Not applicable
Yes
Not applicable
Yes
Not applicable
meets analytical specification of Ph. Eur., BP, 35- Yes
38%,
Yes
ACS reagent
Yes
anhydrous
Yes
dist
Yes
≥99.5%
Yes
Not applicable
Yes
Not applicable
No
1L
2
No
1L
2
No
500ml
20
No
500ml
6
No
500 ml
5
No
1L
3
No
No
No
No
1L
1
No
500 ml
4
No
500 g
5
Anhydrous A.R.
Not applicable
anhydrous, A.R.
Not applicable
Yes
No
500 g
8
Yes
No
500 g
8
Yes
No
500 g
15
Yes
No
500 g
3
monohydrate, A.R.
Not applicable
reagent grade, 95%
Not applicable
Yes
No
500 g
15
Yes
No
500 g
15
Yes
No
100 g
5
Yes
No
100 g
50
ACS reagent, ≥99.5% (T)
indicator,
1% in H2O
Yes
No
250 g
10
Yes
Yes
No
No
100 ml
5
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
Phenol crystal ( AR )
Benzoic acid, A.R.
Acid & Bases
Hydrochloric acid
Sulfuric acid
Nitric acid
Acetic acid
Phosphoric acid
Formic acid
Ammonia solution
Sodium hydroxide
Sodium bicarbonate
Sodium carbonate, anhydrous,
A.R
Potassium hydroxide solution
Potassium carbonate, anhydrous,
A.R.
Inorganic Chemicals
Copper(II) sulfate pentahydrate ,
Reagent Plus®, ~99%
Copper(II) sulfate
Ammonium sulphate, A.R.
Barium chloride, dihydrate, A.R.
Calcium chloride, anhydrous, A.R.
Ammonium bicarbonate
Not applicable
Not applicable
Yes
No
500 g
25
Yes
No
500 g
20
abt.35 % pure ( AR )
abt 98 % pure ( AR )
min. 69 % pure ( AR )
Galcial
Not applicable
Not applicable
7 N in methanol
50% in H2O
(Sodium hydrogen carbonate ) , A.R.
Not applicable
Yes
No
2.5L
50
Yes
No
500 ml
100
Yes
No
500 ml
100
Yes
No
2.5L
15
Yes
No
1L
15
Yes
No
1L
15
Yes
No
1L
2
Yes
No
1L
20
Yes
No
500 g
30
Yes
No
500 g
30
50%
Not applicable
Yes
No
1L
10
Yes
No
500 g
30
Reagent Plus®, ~99%
Yes
No
250 g
15
anhydrous, ≥99.0%
Not applicable
Not applicable
Not applicable
(Ammonium hydrogen carbonate ), A.R.
Yes
No
100 g
15
Yes
No
500 g
20
Yes
No
500 g
20
Yes
No
500 g
20
Yes
No
500 g
30
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
Ammonium chloride, A.R.
Ammonium acetate, A. R.
Ferric chloride, hexahydrate, A.R.
Ferrous sulfate heptahydrate
Not applicable
Not applicable
Not applicable
(Iron (II) sulfate heptahydrate)
ACS reagent
Magnesium chloride, hexahydrate, Not applicable
A.R.
Magnesium sulphate, anhydrous, Not applicable
A.R.
Potassium acetate, anhydrous, Not applicable
ACS
Potassium chloride, A.R.
Not applicable
Silica gel
Not applicable
Potassium iodide, A.R.
Not applicable
Potassium phosphate dibasic, A.R. Not applicable
Potassium phosphate, monobasic, Not applicable
ACS
Potassium hydrogen phthalate, Not applicable
A.R.
Sodium chloride, A.R.
Not applicable
Sodium metabisulphite
(Sodium pyrosulphite ), A.R.
Tin(II) chloride
reagent grade, 98%
Zinc chloride
Dry AR 98%
Ammonium
molybdate, Not applicable
tetrahydrate, A.R.
Sodium thiosulphate, anhydrous, Not applicable
A.R.
Potassium permanganate,
ACS reagent, ≥99%
Potassium dichromate, A.R.
Not applicable
Yes
No
500 g
30
Yes
No
500 g
30
Yes
No
500 g
30
Yes
Yes
No
No
100 g
30
Yes
No
500 g
30
Yes
No
500 g
30
Yes
No
500 g
30
Yes
No
500 g
30
Yes
No
500 g
10
Yes
No
100 g
10
Yes
No
500 g
15
Yes
No
500 g
15
Yes
No
500 g
15
Yes
No
500 g
15
Yes
No
500 g
15
Yes
No
100 g
5
Yes
No
500 g
10
Yes
No
100 g
5
Yes
No
500 g
15
Yes
No
100 g
5
Yes
No
500 g
20
77
78
Potassium chromate
Silver nitrate
ACS reagent, ≥99.5%
≥99.8-100.5%
Yes
No
250 g
4
Yes
No
100 g
4
79
80
Selenium dioxide
Boric acid
≥99.9%
buffer substance ≥99.8%
Yes
No
5g
4
Yes
No
500 g
10
81
82
83
Sodium sulphate, anhydrous, A.R.
Potassium sulphate, A.R.
Hydrogen peroxide solution
Not applicable
Not applicable
≥30% (RT)
Yes
No
500 g
20
Yes
No
500 g
20
Yes
No
500 ml
15
84
Miscellaneous Material
Parafilm
Yes
Yes
No
No
1
meter
10
85
Qualitative filter papers,
100 mm x 38 m - resistant to salt solutions
inorganic acids & alkaline solutions
diameter 11.0 cm
medium fast filtration
smooth
suited
for
general
laboratory
filtrations
(Equivalent to Whatman Grade 01)
100 filters
Yes
Yes
Yes
Yes
No
No
No
No
100
nos
in a
pack
100
Yes
No
100
86
HiIndicator pH Paper
Range : pH 1 to 14 ( 1pack =200no)
Yes
No
87
88
89
90
91
92
Silicon dioxide
Methyl orange, Certified
Methyl red
Methylene blue, Certified
Phenolphthalein
Fluorescein
Powder
Not applicable
Certified pH indicator
Not applicable
pH indicator
Reagent. Ph. Eur.
free acid
Yes
No
200
nos in
a pack
1 kg
Yes
No
10 g
20
Yes
No
10 g
20
Yes
No
100 g
20
Yes
No
100 g
5
Yes
Yes
No
No
25 g
15
2
93
94
95
Iodine, A.R.
Sodium benzoate, A.R.
Sorbic acid
Not applicable
Not applicable
≥99.0%
Yes
No
100 g
10
Yes
No
500 g
20
Yes
No
100 g
15
Chromato Graphic and
Purification Material
96
Silica gel
Silica gel on TLC plates H × W 10 cm × 10 cm,
silica gel matrix, with fluorescent indicator 254
nm
Material : glass support glass silica gel matrix
Quality : with fluorescent indicator 254 nm
Feature : fluorescent indicator H × W 10 cm × 10
cm
Layer thickness : 250 μm
Particle size : 10 μm Pore size : Å60medium
pore diameter
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
25 nos
in a
pack
1
97
98
99
100
Silica gel
Cellulose
Fuller’s earth
Kaolin , Ph Eur
Silica gel for column chromatography, 40
microcrystalline, powder
100-200 mesh
Not applicable
Yes
No
250 g
2
Yes
No
250 g
4
Yes
No
1 kg
2
Yes
No
1 kg
2
101
Yes
No
500 g
10
102
103
Alum
(Aluminum
potassium ACS reagent, reag. ≥99.5%
sulfate dodecahydrate)
Activated charcoal
Not applicable
Sephadex
G-25 , Fine
Yes
No
250 g
10
Yes
No
10 g
3
104
105
Micro Biology Media
Potato Dextrose Agar
Nutrient Agar
Yes
Not applicable
Nutrient Agar - for cultivation of less fastidious Yes
No
100 g
15
No
100 g
16
106
107
108
Peptone
Yeast Extract Powder
Potato powder
microorganisms,
It can be enriched with blood or other biological Yes
fluids.
Yes
Bacteriological
Yes
Not applicable
Yes
Not applicable
Signature of the Bidder ………………………
………………………………………….
(Common Seal of the Company)
Name & address of the Company - …………………………………….…………….……
………………………………………………………..
…….…………….……………………………………
……………….…………….………..........................
No
No
500 g
5
No
500 g
5
No
100 g
20
Annexure A : Specification for Supplies
Package THREE : Laboratory Glassware
EMD = 300,000
Nr
Laboratory
Glass wares
Specification
The most
appropriat
e answer
1
Volumetric flask
With polypropylene stopper borosilicate glass - resistant to heat and chemicals - 5 ml
Yes
No
Require
d
Number
15 Pcs
2
Volumetric flask
With polypropylene stopper borosilicate glass - resistant to heat and chemicals - 10 ml
Yes
No
30 Pcs
3
4
5
6
7
8
9
10
Volumetric flask
Volumetric flask
Volumetric flask
Volumetric flask
Volumetric flask
Volumetric flask
Volumetric flask
Volumetric flask
With polypropylene stopper borosilicate glass - resistant to heat and chemicals - 20ml
Yes
No
With polypropylene stopper borosilicate glass - resistant to heat and chemicals - 25 ml
Yes
No
With polypropylene stopper borosilicate glass - resistant to heat and chemicals - 50 ml
Yes
No
With polypropylene stopper borosilicate glass - resistant to heat and chemicals - 100 ml
Yes
No
30 Pcs
30 Pcs
30 Pcs
30 Pcs
With polypropylene stopper borosilicate glass - resistant to heat and chemicals - 250 ml
Yes
No
With polypropylene stopper borosilicate glass - resistant to heat and chemicals - 500 ml
Yes
No
With polypropylene stopper borosilicate glass - resistant to heat and chemicals - 1000 ml
Yes
No
Yes
No
11
Volumetric flask
Yes
No
5 Pcs
12
Volumetric flask
Yes
No
5 Pcs
13
Measuring cylinder
1ml - borosilicate glass - trapezoidal – clear - P.P stopper - heat & chemical
resistant
2ml - borosilicate glass - trapezoidal – clear - P.P stopper - heat & chemical
resistant
5ml - borosilicate glass - trapezoidal – clear - P.P stopper - heat & chemical
resistant
5ml - borosilicate glass - glass base - tall form - heat & chemical resistant
15 Pcs
15 Pcs
10 Pcs
5 Pcs
Yes
No
25 Pcs
14
Measuring cylinder
10ml - borosilicate glass - glass base - tall form - heat & chemical resistant
Yes
No
25 Pcs
15
16
Measuring cylinder
Measuring cylinder
25ml - borosilicate glass - glass base - tall form - heat & chemical resistant
50ml - borosilicate glass - glass base - tall form - heat & chemical resistant
Yes
No
Yes
No
17
18
19
20
21
22
23
24
25
26
27
28
Measuring cylinder
Measuring cylinder
Measuring cylinder
Measuring cylinder
Measuring cylinder
Mixing cylinder
Mixing cylinder
Mixing cylinder
Mixing cylinder
Mixing cylinder
Mixing cylinder
Mixing cylinder
100ml - borosilicate glass - glass base - tall form - heat & chemical resistant
250ml - borosilicate glass - glass base - tall form - heat & chemical resistant
500ml - borosilicate glass - glass base - tall form - heat & chemical resistant
1000ml - borosilicate glass - glass base - tall form - heat & chemical resistant
2000ml - borosilicate glass - glass base - tall form - heat & chemical resistant
10ml - borosilicate glass - glass base - tall form - heat & chemical resistant
25ml - borosilicate glass - glass base - tall form - heat & chemical resistant
50ml - borosilicate glass - glass base - tall form - heat & chemical resistant
100ml - borosilicate glass - glass base - tall form - heat & chemical resistant
250ml - borosilicate glass - glass base - tall form - heat & chemical resistant
500ml - borosilicate glass - glass base - tall form - heat & chemical resistant
1000ml - borosilicate glass - glass base - tall form - heat & chemical resistant
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
29
30
31
32
33
34
35
Burette
Burette
Burette
Burette
Burette
Burette
Burette
10ml - straight - heat & chemical resistant
25ml - straight - heat & chemical resistant
50ml - straight - heat & chemical resistant
10ml - borosilicate glass - needle valve stopcock - heat & chemical resistant
25ml - borosilicate glass - needle valve stopcock - heat & chemical
50ml - borosilicate glass - needle valve stopcock - heat & chemical resistant Automatic - 10ml - borosilicate glass - chemicals & heat resistance - (Note: not
included reservoir bottle & bellow, need to order separately)
Automatic - 25ml - borosilicate glass - chemicals & heat resistance - (Note: not
included reservoir bottle & bellow, need to order separately)
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
36
Burette
25 Pcs
25 Pcs
25 Pcs
25 Pcs
25 Pcs
15 Pcs
10 Pcs
15 Pcs
15 Pcs
15 Pcs
15 Pcs
15 Pcs
15 Pcs
15 Pcs
25 Pcs
25 Pcs
25 Pcs
10 Pcs
10Pcs
10Pcs
3 Pcs
3 Pcs
37
Burette
38
Burette
39
Burette
40
Burette
41
42
43
44
45
46
47
Burette bottle
Burette bottle
Pipette
Pipette
Pipette
Pipette
Pipette
Automatic - 50ml - borosilicate glass - chemicals & heat resistance - (Note: not
included reservoir bottle & bellow, need to order separately)
Automatic - 10ml - modular - complete with burette liquid reservoir
polypropylene 1000ml, burette clamp & laboratory stand
Automatic - 25ml - modular - complete with burette liquid reservoir
polypropylene 1000ml, burette clamp & laboratory stand
Automatic - 50ml - modular - complete with burette liquid reservoir
polypropylene 1000ml, burette clamp & laboratory stand
Clear - 2 lit
Amber - 2 lit
Graduated - 1ml
Graduated - 2ml
Graduated - 5ml
Graduated - 10ml
Graduated - 20ml
48
Pipette
49
50
51
52
53
Yes
No
3 Pcs
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Yes
Yes
No
No
No
Yes
No
Yes
No
Yes
No
5 Pcs
10 Pcs
10 Pcs
25 Pcs
25 Pcs
25 Pcs
25 Pcs
25 Pcs
Graduated - 25ml
Yes
No
25 Pcs
Pipette
Pipette
Pipette
Pipette
Pipette
Graduated - 50ml
Volumetric - 1ml
Volumetric - 2ml
Volumetric - 3ml
Volumetric - 4ml
Yes
No
Yes
No
Yes
Yes
No
No
Yes
No
15 Pcs
15 Pcs
15 Pcs
15 Pcs
15 Pcs
54
Pipette
Volumetric - 5ml
Yes
No
15 Pcs
55
56
57
58
Pipette
Pipette
Pipette
Pipette
Volumetric - 10ml
Volumetric - 15ml
Volumetric - 20ml
Volumetric - 25ml
Yes
No
Yes
No
Yes
No
Yes
No
15 Pcs
15 Pcs
15 Pcs
15 Pcs
4 Pcs
5 Pcs
59
Pipette
Volumetric - 50ml
Yes
No
15 Pcs
60
61
Pipette stand
Pipette stand
Vertical - 94 pipettes, - polypropylene
Horizontal - 12 pipettes, - polypropylene
Yes
No
Yes
No
10 Pcs
10 Pcs
62
63
Density bottle
Density bottle
Calibrated - 5 ml
Calibrated - 10 ml
Yes
No
Yes
No
64
65
Density bottle
Density bottle
Calibrated - 25 ml
Calibrated - 50 ml
Yes
No
Yes
No
5 Pcs
5 Pcs
66
67
Density bottle
Beaker
Calibrated - 100 ml
Low form - 25 ml - borosilicate glass - heat & chemical resistant - thick walled
& heavy base - reinforced ring
Low form - 50 ml - borosilicate glass - heat & chemical resistant - thick walled &
heavy base - reinforced ring
Low form - 100 ml - borosilicate glass - heat & chemical resistant - thick walled
& heavy base - reinforced ring
Low form - 150 ml - borosilicate glass - heat & chemical resistant - thick walled
& heavy base - reinforced ring
Low form - 250 ml - borosilicate glass - heat & chemical resistant - thick walled
& heavy base - reinforced ring
Low form - 400 ml - borosilicate glass - heat & chemical resistant - thick walled
& heavy base - reinforced ring
Low form - 600 ml - borosilicate glass - heat & chemical resistant - thick walled
& heavy base - reinforced ring
Low form - 800 ml - borosilicate glass - heat & chemical resistant - thick walled
& heavy base - reinforced ring
Low form - 1000 ml - borosilicate glass - heat & chemical resistant - thick walled
& heavy base - reinforced ring
Yes
No
5 Pcs
Yes
No
Yes
No
68
Beaker
69
Beaker
70
Beaker
71
Beaker
72
Beaker
73
Beaker
74
75
76
Beaker
Beaker
Beaker
5 Pcs
5 Pcs
25 Pcs
15 Pcs
Yes
No
Yes
No
Yes
No
25 Pcs
25 Pcs
25 Pcs
Yes
No
Yes
No
Yes
No
25 Pcs
25 Pcs
25 Pcs
Yes
Low form - 25ml - clear polypropylene - chemical resistant – autoclavable at Yes
No
No
25 Pcs
25 PCs
77
Beaker
78
Beaker
79
Beaker
80
Beaker
81
Beaker
82
83
Beaker jug
Beaker jug
84
Beaker jug
85
Flask erlenmeyer
86
Flask erlenmeyer
87
Flask erlenmeyer
88
Flask erlenmeyer
89
Flask erlenmeyer
90
Flask erlenmeyer
91
92
Flask
Flask
1210C
Low form - 50ml - clear polypropylene - chemical resistant - autoclavable at
1210C
Beaker - low form - 100ml - clear polypropylene - chemical resistant autoclavable at 1210C
Low form - 250ml - clear polypropylene - chemical resistant - autoclavable at
1210C
Low form - 500ml - clear polypropylene - chemical resistant - autoclavable at
1210C
Low form -1000ml - clear polypropylene - chemical resistant - autoclavable at
1210C
250ml - Polypropylene - chemical resistant
500ml - Polypropylene - chemical resistant
1000ml - Polypropylene - chemical resistant
50ml - medium neck - borosilicate glass - chemical & heat resistant - thick walls
and heavy bases
100ml - medium neck - borosilicate glass - chemical & heat resistant - thick walls
and heavy bases
250ml - medium neck - borosilicate glass - chemical & heat resistant - thick walls
and heavy bases
300ml - medium neck - borosilicate glass - chemical & heat resistant - thick walls
and heavy bases
500ml - medium neck - borosilicate glass - chemical & heat resistant - thick walls
and heavy bases
1000ml - medium neck - borosilicate glass - chemical & heat resistant - thick
walls and heavy bases
Flat bottom - 50 ml - borosilicate glass - chemical & heat resistant
Flat bottom - 100 ml - borosilicate glass - chemical & heat resistant
Yes
No
25 Pcs
Yes
No
25 Pcs
Yes
No
25 Pcs
Yes
No
25 Pcs
Yes
No
15 Pcs
Yes
No
Yes
No
10 Pcs
10 Pcs
Yes
No
10 Pcs
Yes
No
Yes
No
10 Pcs
10 Pcs
Yes
No
Yes
No
Yes
No
10 Pcs
10 Pcs
5 Pcs
Yes
No
Yes
No
Yes
No
5 Pcs
25 Pcs
25 Pcs
Yes
No
25 Pcs
Yes
No
15 Pcs
Yes
No
Yes
No
Yes
No
10 Pcs
10 Pcs
10 Pcs
Yes
No
10 Pcs
Yes
No
Yes
No
Round bottom - 1000ml - borosilicate glass - chemical & heat resistant
Round bottom - 2000ml - borosilicate glass - chemical & heat resistant
Yes
No
15 Pcs
10 Pcs
10 Pcs
Yes
No
Stainless steel - with insulated jaws - suitable for all types of flasks
100ml - made of cork - suitable for round bottom flasks
250ml - made of cork - suitable for round bottom flasks
500ml - made of cork - suitable for round bottom flasks
1000ml - made of cork - suitable for round bottom flasks
Pear shape - 10ml - borosilicate glass - chemical & heat resistant
Yes
No
Yes
No
Yes
Yes
No
No
Yes
No
Yes
No
Pear shape - 25 ml - borosilicate glass - chemical & heat resistant
Yes
No
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 PCs
10 Pcs
Yes
No
10 PCs
Pear shape - 100ml - borosilicate glass - chemical & heat resistant
Kjeldhal - 100ml - borosilicate glass - chemical & heat resistant - heavy wall
Yes
No
10 Pcs
Yes
No
Kjeldhal - 250ml - borosilicate glass - chemical & heat resistant - heavy wall
Kjeldhal - 500ml - borosilicate glass - chemical & heat resistant - heavy wall
Yes
No
10 Pcs
10 Pcs
Yes
No
Kjeldhal - 750ml - borosilicate glass - chemical & heat resistant - heavy wall
Yes
No
93
Flask
Flat bottom - 250 ml - borosilicate glass - chemical & heat resistant
94
Flask
95
96
97
Flask
Flask
Flask
Flat bottom - 500 ml - borosilicate glass - chemical & heat resistant
Flat bottom - 1000 ml - borosilicate glass - chemical & heat resistant
Flat bottom - 2000 ml - borosilicate glass - chemical & heat resistant
98
Flask
99
100
101
Flask
Flask
Flask
102
103
Flask
Flask tongs
104
105
106
107
108
109
Flask stand Flask stand Flask stand Flask stand Flask
Flask
110
Flask
111
Flask
112
113
Flask
Flask
114
115
Flask
Flask
Round bottom - 50 ml - borosilicate glass - chemical & heat resistant
Round bottom - 100 ml - borosilicate glass - chemical & heat resistant
Round bottom - 250ml - borosilicate glass - chemical & heat resistant
Round bottom - 500ml - borosilicate glass - chemical & heat resistant
Pear shape - 50ml - borosilicate glass - chemical & heat resistant
10 Pcs
15 Pcs
10 Pcs
10 Pcs
116
117
Flask
Flask
118
119
Flask
Flask
120
Flask
121
122
123
Flask
Flask
Flask
124
Flask
125
Flask
126
Flask
127
Flask
128
Flask
129
Flask
130
Flask
131
Flask
132
Flask
Kjeldhal - 1000ml - borosilicate glass - chemical & heat resistant - heavy
Yes
No
Evaporating - 10ml - borosilicate glass - chemical & heat resistant - heavy wall
Evaporating - 250ml - borosilicate glass - chemical & heat resistant - heavy wall
Yes
No
Yes
No
Evaporating - 500ml - borosilicate glass - chemical & heat resistant - heavy wall
Evaporating - 1000ml - borosilicate glass - chemical & heat resistant - heavy Yes
wall
Yes
Receiving - 100ml - borosilicate glass - chemical & heat resistant - heavy wall
Yes
Receiving - 250ml - borosilicate glass - chemical & heat resistant - heavy wall
Yes
No
10 PCs
15 PCs
No
10 Pcs
No
No
Yes
No
10 Pcs
10 Pcs
10 Pcs
Yes
No
10 Pcs
Yes
No
10 Pcs
Yes
No
10 Pcs
Yes
No
10 Pcs
Yes
No
10 Pcs
Yes
No
5 Pcs
Yes
No
5 Pcs
Yes
No
5 Pcs
Yes
No
5 Pcs
Receiving - 500ml - borosilicate glass - chemical & heat resistant - heavy wall
Receiving - 1000 ml - borosilicate glass - chemical & heat resistant - heavy wall
Flat bottom - 50ml - NS neck- 19/26 - borosilicate glass - chemical & heat
resistant - thick wall & heavy base
Flat bottom - 50ml - NS neck- 24/29 - borosilicate glass - chemical & heat
resistant - thick wall & heavy base
Flat bottom - 100ml NS neck- 19/26 - borosilicate glass - chemical & heat
resistant - thick wall & heavy base
Flat bottom - 100ml - NS neck- 24/29 - borosilicate glass - chemical & heat
resistant - thick wall & heavy base
Flat bottom - 250ml - NS neck- 19/26 - borosilicate glass - chemical & heat
resistant - thick wall & heavy base
Flat bottom - 250ml - NS neck- 24/29 - borosilicate glass - chemical & heat
resistant - thick wall & heavy base
Flat bottom - 500ml - NS neck- 24/29 - borosilicate glass - chemical & heat
resistant - thick wall & heavy base
Flat bottom - 500ml - NS neck- 29/32 - borosilicate glass - chemical & heat
resistant - thick wall & heavy base
5 Pcs
10 Pcs
133
Flask
134
Flask
135
136
137
138
139
140
141
Flask
Flask
Flask
Flask
Flask
Flask
Flask
142
143
Flask
Flask
144
145
Flask
Flask
146
147
148
149
150
151
152
153
Flask
Flask
Flask
Flask
Separating funnel
Separating funnel
Separating funnel
Separating funnel
Flat bottom - 1000ml - NS neck- 24/29 - borosilicate glass - chemical & heat
resistant - thick wall & heavy base
Flat bottom - 1000ml - NS neck- 29/32 - borosilicate glass - chemical & heat
resistant - thick wall & heavy base
Round bottom - NS neck- 29/32 - 50ml
Round bottom - NS neck- 19/26 - 100ml
Round bottom - NS neck- 19/26 - 250ml
Round bottom - NS neck- 24/29 - 500ml
Round bottom - NS neck- 24/29 - 1000ml
Round bottom - NS neck- 29/32 - 2000ml
Parallel side arm - 100ml - 2 NS Necks - center 29/32 - arm 14/23 - borosilicate
glass - chemical & heat resistant - thick wall & heavy base
Parallel side arm - 250ml - center 29/32 - arm 14/23
Yes
No
5 Pcs
Yes
No
5 Pcs
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
Yes
No
Yes
No
Parallel side arm - 500ml - center 29/32 - arm 14/23
Yes
Parallel side arm - 1000ml - center 29/32 - arm 14/23
Parallel side arm - 250ml - 2 NS Necks - center 29/32 - arm 29/32 - borosilicate Yes
glass - chemical & heat resistant - thick wall & heavy base
Yes
Round bottom angled side arms - center 29/32 - arm 14/23 - 250ml
Yes
Round bottom angled side arms - center 29/32 - arm 14/23 - 500ml
Yes
Round bottom angled side arms - center 29/32 - arm 14/23 - 1000ml
Yes
Round bottom angled side arms - center 29/32 - arm 19/26 - 250ml
Yes
Squibb - 50ml - graduated - PTFE stopcock
Yes
Squibb - graduated - PTFE stopcock - 100ml
Yes
Squibb - graduated - PTFE stopcock - 250ml
Yes
Squibb - graduated - PTFE stopcock - 500ml
No
No
No
No
No
No
No
No
No
No
5 Pcs
5 PCs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
154
155
156
157
158
159
160
161
162
163
164
165
166
167
Separating funnel
Condenser
Condenser
Condenser
Condenser
Soxhlet condenser
Condenser - Soxhlet
Soxhlet condenser
Condenser Soxhlet
Extractor - Soxhlet
Extractor - Soxhlet
Extractor - Soxhlet
Extractor - Soxhlet
Watch glasses
168
169
170
171
172
173
Watch glasses
Watch glasses
Watch glasses
Watch glasses
Watch glasses
Weighing bottles
174
Weighing bottles
175
Weighing bottles
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
30x50mm - borosilicate glass - resistant to heat and chemicals - white labeling Yes
area for making notes
35x30mm- borosilicate glass - resistant to heat and chemicals - white labeling Yes
area for making notes
35x70mm- borosilicate glass - resistant to heat and chemicals - white labeling Yes
area for making notes
No
Squibb - graduated - PTFE stopcock - 1000ml
Liebig - glass water connector - 300mm - NS 29/32 - borosilicate glass
Liebig - glass water connector - 400mm - NS 29
Allihn - glass water connector - 300mm - NS 29/32 - borosilicate glass
Allihn - glass water connector - 400mm - NS 29
Allihn - glass water connector - 300mm - NS 45/40 - borosilicate glass
Allihn - glass water connector - 400mm
Dimroth - glass water connector - 300mm - NS 45/40 - borosilicate glass
Dimroth - glass water connector - 400mm
Without stopcock - NS 29/32 - NS 45/40 - 100ml
Without stopcock - NS 29/32 - NS 45/40 - 150ml
Without stopcock - NS 29/32 - NS 45/40 - 250ml
Extractor - Soxhlet - without stopcock - NS 29/32 - NS 45/40 - 500ml
50mm - borosilicate glass - polished edge - resistant to heat and chemicals
60mm- borosilicate glass - polished edge - resistant to heat and chemicals
70mm- borosilicate glass - polished edge - resistant to heat and chemicals
80mm- borosilicate glass - polished edge - resistant to heat and chemicals
100mm- borosilicate glass - polished edge - resistant to heat and chemicals
125mm- borosilicate glass - polished edge - resistant to heat and chemicals
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 PCs
5 Pcs
25 Pcs
25 Pcs
25 Pcs
10 Pcs
10 Pcs
5 Pcs
10 Pcs
No
10 Pcs
No
5 Pcs
176
Weighing bottles
50x30mm- borosilicate glass - resistant to heat and chemicals - white labeling Yes
area for making notes
50x80mm- borosilicate glass - resistant to heat and chemicals - white labeling Yes
area for making notes
60x30mm- borosilicate glass - resistant to heat and chemicals - white labeling Yes
area for making notes
No
No
5 Pcs
5 Pcs
5 Pcs
No
177
Weighing bottles
178
Weighing bottles
179
Weighing bottles
80x30mm- borosilicate glass - resistant to heat and chemicals - white labeling area for
making notes
Yes
No
5 Pcs
180
181
182
Weighing boats
Weighing boats
Scoop
30ml - P.P - white - antistatic - non sterile
White - antistatic - non sterile - 100ml
Yes
No
Yes
No
Yes
No
25 Pcs
25 Pcs
10 Pcs
183
184
185
186
Scoop
Scoop
Scoop
Scoop
Yes
No
Yes
No
Yes
No
Yes
No
187
188
189
190
Scoop
Scoop
Scoop
Scoop
Yes
No
Yes
No
Yes
No
Yes
No
191
192
193
194
Scoop
Porcelain mortar
Porcelain mortar
Porcelain mortar
Yes
No
Yes
No
Yes
No
Yes
No
195
196
Porcelain mortar
Dish tong
Yes
No
Yes
No
Stainless steel - 50mm diameter
Stainless steel - 75mm diameter
Stainless steel - 100mm diameter
Stainless steel - 120mm diameter
P.P - 25ml
P.P - 50ml
P.P - 100ml
P.P - 250ml
P.P - 500ml
P.P - 1000ml
Pestle - 75mm
Pestle - 100mm
Pestle - 125mm
Pestle - 150mm
Stainless steel - 300mm - high heat resistant upto 10000C
10 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
15 Pcs
197
198
201
Crucible tong
Agate mortars with
pestle
Agate mortars with
pestle
Agate mortars with
pestle
Casseroles
202
203
204
Casseroles
Evaporating dish
Evaporating dish
205
206
Evaporating dish
Evaporating dish
207
Evaporating dish
208
209
Evaporating dish
Crucibles
210
Crucibles
211
Crucibles
212
Crucibles
213
Crucibles
214
Crucibles
199
200
Yes
No
Yes
No
10 Pcs
1 Pc
Yes
No
1 Pc
Yes
No
2 Pcs
Yes
No
5 Pcs
Yes
No
Yes
No
Porcelain - flat bottom - 80mm
Porcelain - flat bottom - 100mm
Yes
No
5 Pcs
5 Pcs
5 Pcs
Yes
No
Porcelain - 100mm - high heat resistant upto 10000C
Yes
No
5 Pcs
5 Pcs
Porcelain - 125mm- high heat resistant upto 10000C
Porcelain - 150mm- high heat resistant upto 10000C
Glassed porcelain - high form - 30mm Dia, 15ml, max. Temperature 11500C,with
lid 30mm
Glassed porcelain - high form - 35mm Dia, 24ml, max. Temperature 11500C,with
lid 35mm
Glassed porcelain - high form - 40mm Dia, 40ml, max. Temperature 11500C,with
lid 40mm (
Glassed porcelain - low form - 45mm Dia, 25ml, max. Temperature 1150 0C,with
lid 45mm
Glassed porcelain - low form - 50mm Dia, 29ml, max. Temperature 1150 0C,with
lid 50mm
Glassed porcelain - medium form - 35mm Dia, 13ml, , max. Temperature 11500C
with lid 35mm
Yes
No
5 Pcs
Yes
No
Yes
No
5 Pcs
5 Pcs
Yes
No
5 Pcs
Yes
No
5 Pcs
Yes
No
5 Pcs
Yes
No
5 Pcs
Yes
No
5 Pcs
Stainless steel - 300mm- porcelain - - high heat resistant up to 10000C
Ext. Dia 50mm,manufactured from natural occuring agate stone, hardness 6.5
Ext. Dia 75mm,manufactured from natural occuring agate stone, hardness 6.5
Ext. Dia 100 mm,manufactured from natural occuring agate stone, hardness 6.5
Porcelain - 140ml
Porcelain - 200ml
Porcelain - flat bottom - 60mm
215
Crucibles
216
Crucibles
217
Crucibles
218
Desiccators
219
Desiccators
220
Desiccators
221
222
Desiccator
Filter flask
223
224
Filter flask
Rubber adapters
225
Rubber adapters
226
227
228
Rubber adapters
Rubber adapters
Funnel
229
230
231
232
Funnel
Funnel
Funnel
Funnel
233
234
235
Funnel
Funnel
Funnel
Glassed porcelain - medium form - 40mm Dia, 20ml, max. Temperature Yes
11500C,with lid 40mm
Glassed porcelain - medium form - 45mm Dia, 38ml, max. Temperature Yes
11500C,with lid 45mm
Glassed porcelain - medium form - 50mm Dia, 49ml, max. Temperature Yes
11500C,with lid 50 mm
No
5 Pcs
No
5 Pcs
No
5 Pcs
Yes
No
1 Pc
Yes
No
1 Pc
Yes
No
1 Pc
Yes
No
Glass nozzle - 250ml- borosilicate glass - heat & chemical resistant
Glass nozzle - 500ml - borosilicate glass - heat & chemical resistant
Yes
No
5 Pcs
5 Pcs
Yes
No
For filter flask - 100ml
Yes
No
5 Pcs
10 Pcs
Yes
No
10 Pcs
Yes
No
Yes
No
Yes
No
10 Pcs
10 Pcs
10 Pcs
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Glass - 250mm- non vacuum - borosilicate glass
Glass - 300mm- non vacuum - borosilicate glass
Glass - vacuum - 250mm- borosilicate glass
Glass nozzle - 100ml - borosilicate glass - heat & chemical resistant
For filter flask - 250ml&500ml
For filter flask - 1000ml
For filter flask - 2000ml
General use - 40 mm - borosilicate glass - resistant to heat
General use - 60 mm- borosilicate glass - resistant to heat
General use - 80 mm- borosilicate glass - resistant to heat
General use - 100 mm- borosilicate glass - resistant to heat
General use - 120 mm- borosilicate glass - resistant to heat
General use - 150 mm- borosilicate glass - resistant to heat
General use - P.P. - 40 mm - autoclavable
General use - P.P. - 50 mm - autoclavable
10 Pcs
10 Pcs
10 Pcs
5 Pcs
5 Pcs
10 Pcs
10 Pcs
236
Funnel
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
Funnel
Funnel
Funnel
Analytical funnel Funnel Funnel Funnel Funnel Funnel holder
Funnel holder
Funnel holder
Funnel holder
Funnel holder
Separating funnel
holder
Filter funnel
Filter funnel
Filter funnel
Filter funnel
255
256
Filter funnel
Filter funnel
257
258
Filter funnel
Filter funnel
General use - P.P. - 75 mm- autoclavable
General use - P.P. - 100 mm- autoclavable
General use - P.P. - 120 mm- autoclavable
General use - P.P. - 150 mm- autoclavable
Glass - 80mm
Buchner - porcelain - 70 mm
Buchner - porcelain - 110 mm
Buchner - P.P - 70 mm
Buchner - P.P - 110 mm
Steel - 40 mm - with boss head
Steel - boss head - 60 mm
Steel - boss head - 80 mm
Steel - boss head - 100 mm
P.P. - 170 mm
P.P. - 170 mm
Sintered glass discs - 50 ml - 3D - por 3
Sintered glass discs - 50 ml - 3D - por 4
Sintered glass discs - 80 ml - 11 D - por 3
Sintered glass discs - 80 ml - 11 D - por 4
Sintered glass discs - 125 ml - 17 D - por 3
Sintered glass discs - 125 ml - 17 D - por 4
Sintered glass discs - 500 ml - 25 D - por 3
Sintered glass discs - 500 ml - 25 D - por 4
Yes
No
10 Pcs
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
10 Pcs
10 Pcs
10 Pcs
10 Pcs
2 PCs
2 Pcs
3 Pcs
3 Pcs
3 Pcs
3 Pcs
3 Pcs
3 Pcs
3 Pcs
Yes
No
3 Pcs
Yes
No
Yes
No
Yes
No
Yes
No
2 Pcs
2 Pcs
1 Pc
1 Pc
Yes
No
Yes
No
Yes
No
Yes
No
1 Pc
1 Pc
1 Pc
1 Pc
259
Clamp
260
Clamp
261
262
263
264
265
266
267
Clamp
Clamp
Boss head
Boss head
Boss head
Boss head
Spatula
268
269
Spatula
Spatula
270
271
Spatula
Spatula
272
273
Spatula
Forceps
274
275
Forceps
Forceps
276
277
Forceps
Forceps
278
Forceps
279
Forceps
Yes
No
2 Pcs
Yes
No
2 Pcs
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
2 Pcs
2 Pcs
2 Pcs
2 Pcs
2 Pcs
2 Pcs
25 Pcs
Yes
No
Micro - stainless steel - 180 mm - one flat end and one end angled
Poly - 180 mm
Yes
No
Yes
No
Stainless steel - 180 mm - one flat end and one end angled
150 mm
Yes
No
Yes
No
Blunt - stainless steel - 130 mm
General use - blunt/straight - 200 mm
Cover glass - 105 mm, "Cover glass" forceps is manufactured from stainless
steel.
Filter paper - 130 mm, "Filter paper" forceps is manufactured from stainless steel.
Yes
No
Yes
No
Yes
No
Yes
No
Dissecting - sharp/straight - 130 mm
Yes
No
6Pcs
6 Pcs
Yes
No
3 Pcs
Yes
No
3 Pcs
2 jaws - 50 mm - not included boss head - need to order separately - total length
250mm
3 jaws - large - 70 mm - not included boss head - need to order separately - total
length 270mm
2 jaws - swivel - 50 mm - with boss head - total length 200mm
3 jaws - large - swivel - 70 mm - with boss head - total length 200mm
Standard - 10 mm - total length of 10 mm with 15 mm screw opening possibility
Swivel - 17 mm - total length of 17 mm with 15 mm screw opening possibility
Heavy duty
For frames
Macro - flat spoon - stainless steel - 180 mm - one end flat & one end spoon
Round grooved - stainless steel - 180 mm - one end flat & one end grooved
Dissecting - sharp/straight - 150 mm
Dissecting - sharp/curved - 130 mm
24 Pcs
24 Pcs
24 Pcs
12 Pcs
12 Pcs
12 Pcs
12 Pcs
12 Pcs
280
281
282
Laboratory stands
Laboratory stands
Laboratory stands
283
284
Laboratory stands
Laboratory stands
285
Crystallization
dishes
Crystallization
dishes
Crystallization
dishes
Crystallization
dishes
Crystallization
dishes
Bunsen burner
Tripod stand
Laboratory jack
Laboratory jack
Ire gauzes
Ceramic triangle
Ceramic triangle
Stopper
Stopper
Stopper
Stopper
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
Rectangular - 130x200 mm - rod height 750 mm
Rectangular - 150x300 mm - rod height 750 mm
Yes
No
Yes
No
Rectangular - 200x315 mm - rod height 750 mm
Tripod base - foot length 115 mm - rod height 750 mm
Yes
No
Yes
No
P.P - 175x300 mm - Read Height 600 mm
Yes
No
6 Pcs
3 Pcs
Yes
No
3 Pcs
Yes
No
3 Pcs
Yes
No
3 Pcs
Yes
No
1 Pc
Yes
No
1 Pc
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
12 Pcs
6 Pcs
2 Pcs
2 Pcs
24 Pcs
6 Pcs
6 Pcs
24 Pcs
24 Pcs
24 Pcs
24 Pcs
2 Pcs
2 Pcs
2 Pcs
Boro 3.3 glass - 60ml
Boro 3.3 glass - 100ml
Boro 3.3 glass - 150ml
Boro 3.3 glass - 300ml
Boro 3.3 glass - 900ml
Standard - suitable for all gas types
Fixed height - top diameter 150mm - 200mm height
200x200 mm
150x150 mm
W - ceramic center diameter 150mm - 160x160mm
50 mm
60 mm
Rubber - 11x16x25 mm
Rubber - 14x20x30 mm
Rubber - 18x24x30 mm
Rubber - 21x28x35 mm
301
302
303
304
305
306
307
308
309
310
311
312
313
314
Stopper
Tubing
Tubing
Tubing
Tubing clamp
Tubing clamp
Stopwatch
Timer
Timer
Timer
Magnetic bar
Magnetic bar
Magnetic bar
Magnetic bar
315
316
317
318
319
320
321
322
Magnetic bar
Stirring rod
Parafilm
Parafilm
323
324
Thermometer
Thermometer
Parafilm dispenser
Thermometer
Thermometer
Thermometer
Rubber - 26x34x40 mm
Rubber - 6mm inner dia. X 12 mm outer dia.,1 meter
Rubber - 8x14 mm,1 Meter
Rubber - 6x16 mm,1 Mete
Click lock - up to 15 mm hose diameter
Click lock - up to 20 mm hose diameter
Mechanical - 30 min - Winding - 2-scale
Mechanical - 60 min - resolution 1min - ring signals at the end of cycle
Mechanical - with clips - 60 min.
Electronic - 19 hour /59 min
20x6 mm - encapsulated with a high grade pure PTFE
30x6 mm - encapsulated with a high grade pure PTFE
40x7 mm - encapsulated with a high grade pure PTFE
50x7 mm - encapsulated with a high grade pure PTFE
Magnetic bar retriever - 350 mm long
Glass - 250x6 mm
50 mm x 75 m - resistant to salt solutions, inorganic acids & alkaline solutions
100 mm x 38 m - resistant to salt solutions, inorganic acids & alkaline solutions
Comes with the cutting blade & roll reservoir for protection of parafilm from dust
Enclosed scale - -10/ +110 - double walled - subdivision 10C
Enclosed scale - -10/ +200 - double walled - subdivision 10C
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Enclosed scale - -10/ +300 - double walled - subdivision 20C
Enclosed scale - -10/ +420 - double walled - subdivision 20C
Yes
No
Yes
No
Solid stem - -20/ +110 - Solid Stem - red colour liquid - subdivision 0.50C
Yes
No
24 Pcs
6 pcs
6 Pcs
6 Pcs
6 Pcs
6 Pcs
2 Pcs
6 Pcs
6 Pcs
6 Pcs
24 Pcs
24 Pcs
12 Pcs
6 Pcs
3 Pcs
12 Pcs
10 Pcs
10 Pcs
6 Pcs
6 Pcs
12 Pcs
6 Pcs
6 Pcs
6 Pcs
325
Thermometer
326
Thermometer
327
Thermometer
328
Thermometer
329
Thermometer
330
Thermo hygrometer
331
332
Thermometer clamp
& holder
Bottle
333
Bottle
334
335
336
337
338
Bottle
Bottle
Bottle
Bottle
Bottle
Solid stem - -10/ +200 - Solid Stem - red colour liquid - subdivision 10C
Max.-min. - -30/ +50 - push button for automatic resetting - polypropylene
housing with inclined shelter - subdivision 10c
Indoor-outdoor - -30/ +50 - Indoor / Outdoor - can measure both in C and F subdivision 10C
Insertion - -50/ +300 - Insertion - ideal for single temperature measurements in
liquids - LCD display - subdivision 0.10C
Electronic - -20/ +50 - supplied with two probes enables indoor/outdoor
measurement - LCD display - subdivision 0.10C
50/ +70 - maximum/minimum value monitoring with time alarm function - LCD
display - subdivision 0.10C - measuring range is between 10% to 99% with
subdivisions of 1% moisture
30 mm long
Screw cap - borosilicate glass - clear - 100 ml - angled shoulder for liquid flow &
pouring ring for droplet transfer - highly resistant to heat and chemicals
Screw cap - borosilicate glass - clear - 250 ml - angled shoulder for liquid flow &
pouring ring for droplet transfer - highly resistant to heat and chemicals
Screw cap - borosilicate glass - clear - 500 ml - angled shoulder for liquid flow &
pouring ring for droplet transfer - highly resistant to heat and chemicals
Screw cap - borosilicate glass - clear - 1000 ml - angled shoulder for liquid flow
& pouring ring for droplet transfer - highly resistant to heat and chemicals
Screw cap - P.E - 100 ml - angled shoulder for liquid flow & pouring ring for
droplet transfer - highly resistant to chemicals
Screw cap - clear - 250 ml - P.E - angled shoulder for liquid flow & pouring ring
for droplet transfer - highly resistant to chemicals
Screw cap - clear - 500 ml - P.E - angled shoulder for liquid flow & pouring ring
for droplet transfer - highly resistant to chemicals
Yes
No
Yes
No
Yes
No
6 Pcs
3 Pcs
Yes
No
3 Pcs
Yes
No
3 Pcs
Yes
No
3 Pcs
Yes
No
24 Pcs
Yes
No
12 Pcs
Yes
No
Yes
No
Yes
No
6 Pcs
12 Pcs
6 Pcs
3 Pcs
Yes
No
Yes
No
Yes
No
3 Pcs
3 Pcs
3 Pcs
339
Bottle
340
341
342
343
Bottle
Bottle
Bottle
Bottle
344
345
Bottle
Dropping bottle
346
347
Dropping bottle
Wash bottle
348
Wash bottle
349
Wash bottle
350
Wash bottle
351
Ground joints
352
353
Ground joints
Ground joints
354
355
356
357
Ground joints
Ground joints
Clips
Clips
Screw cap - clear - 1000 ml - P.E - angled shoulder for liquid flow & pouring ring
for droplet transfer - highly resistant to chemicals
Rectangular - wide neck - clear - 50 ml - P.E - highly resistant to chemicals
Rectangular - wide neck - clear - 100 ml - P.E - highly resistant to chemicals
Rectangular - wide neck - clear - 250 ml - P.E - highly resistant to chemicals
Rectangular - wide neck - clear - 500 ml - P.E - highly resistant to chemicals
Rectangular - wide neck - clear - 1000 ml - P.E - highly resistant to chemicals
Flat head - borosilicate glass - clear - 100 ml - highly resistant to heat and
chemicals
Tip head - clear - P.E. - 100 ml - highly resistant to Chemicals
Standard - 100 ml - narrow neck - P.E - easy to press, semi rigid, translucent and
have excellent clarity
Standard - 250 ml - narrow neck - P.E - easy to press, semi rigid, translucent and
have excellent clarity
Standard - 500 ml - narrow neck - P.E - easy to press, semi rigid, translucent and
have excellent clarity
Standard - 1000 ml - narrow neck - P.E - easy to press, semi rigid, translucent and
have excellent clarity
Socket - NS 10/19 - 120 mm
Socket - NS 24/29 - 120mm
Socket - NS 29/32 - 120mm
Cone - NS 24/29 - 120mm
Cone - NS 29/32 - 120mm
Clip for NS joints - NS 24/29 - green
Clips for NS joints - NS 29/32 - red
Yes
No
3 Pcs
24 Pcs
24 Pcs
24 Pcs
12 Pcs
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
6 Pcs
6 Pcs
Yes
No
6 Pcs
Yes
No
25 Pcs
Yes
No
5 Pcs
Yes
No
5 Pcs
Yes
No
Yes
No
5 Pcs
5 Pcs
Yes
No
Yes
No
Yes
No
Yes
No
6 Pcs
24 Pcs
5 Pcs
5 Pcs
25 Pcs
25 Pcs
358
Clips
359
Adapter
360
Adapter
361
Adapter
362
Adapter
363
Connectors
364
365
Connectors
Connectors
366
367
368
Adapters
Adapters
Adapters
369
Chromatography
column
Chromatography
column
Chromatography
column
Chromatography
column
Chromatography
column
Chromatography
column
Gas washing bottle
head
Gas washing bottle
head
370
371
372
373
374
375
376
Yes
No
25 Pcs
Yes
No
10 Pcs
Yes
No
10 Pcs
Yes
No
10 Pcs
Yes
No
10 Pcs
Straight - threaded tube - NS 14/23 - Borosilicate glass 3.3 - GL14
Threaded tube - straight - glass - NS 29/32 - Borosilicate glass 3.3 - GL 14
Yes
No
10 Pcs
Yes
No
Threaded tube - straight - glass - NS 29/32 - Borosilicate glass 3.3 - GL 25
Yes
No
10 Pcs
10 Pcs
For thermometer - straight - diameter 6-8mm - NS 29/32 - Borosilicate glass 3.3 - GL 14
Yes
Yes
No
No
Yes
No
10 Pcs
10 Pcs
10 Pcs
Yes
No
5 Pcs
Yes
No
5 Pcs
Yes
No
5 Pcs
Yes
No
5 Pcs
Yes
No
5 Pcs
Yes
No
5 Pcs
Yes
No
10 Pcs
Yes
No
10 Pcs
Clips for spherical joints KS 29
Expansion - NS 24/29 - NS 19/26 - Socket NS size is larger than cone NS size
Expansion - NS 29/32 - NS 14/23 - Socket NS size is larger than cone NS size
Reduction - NS 24/29 - NS 45/40 - Socket NS size is larger than cone NS size
Reduction - NS 29/32 - NS 34/35 - Socket NS size is larger than cone NS size
For tubing - bent - without stopcock - NS 29/32 - Borosilicate glass 3.3
Delivery - for distillation - bent - NS 29/32 - 65mm - Borosilicate glass 3.3
Without support - 15 ml volume
Without support - 25 ml volume
Without support - 35 ml volume
With support - 15 ml volume
With support - 25 ml volume
With support - 35 ml volume
125 ml
250 ml
377
378
Gas washing bottle
head
Gas washing bottle
379
380
381
382
383
Gas washing bottle
Gas washing bottle
Cleaning brush
Cleaning brush
Cleaning brush
384
Laboratory brushes
Laboratory brushes for test tubes
385
Laboratory brushes
386
387
Cleaning brush
Staining jar
388
Staining jar
389
390
Staining rack
Microscope cover
glasses
Microscope cover
glasses
Microscope cover
glasses
Blood counting
chamber
Haemacyto meter
cover glasses
Microscope slides
Laboratory brushes for narrow test tubes
- Swivel head - length 330mm
Glass - Suitable for holding 76x26 mm slides horizontally - supplied with glass
lid
Macro - glass - suitable for holding 76x26 mm slides vertically - need supplied
with the rack - need to order separately
Staining rack for Staining jar - suitable for holding 76x26 mm slides vertically
391
392
393
394
395
Yes
No
10 Pcs
Yes
No
10 Pcs
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
10 Pcs
10 Pcs
25 Pcs
25 Pcs
25 Pcs
Yes
No
25 Pcs
Yes
No
25 Pcs
Yes
No
Yes
No
6 Pcs
6 Pcs
Yes
No
6 Pcs
Yes
No
Yes
No
3 Pcs
24 Pcs
Yes
No
24 Pcs
Yes
No
24 Pcs
Yes
No
2 Pcs
Yes
No
24 Pcs
Yes
No
24 Pcs
500 ml
125 ml
250 ml
500 ml
Burette and tubings - 20x120 mm
Large size bottle - 70x150 mm
Small size bottle - 40x100 mm
18x18 mm,
22x22 mm
24x50 mm
Neubauer improved - optical glass
Haemacyto meter cover glasses - 24x24 mm - borosilicate glass
Cut edges - plain
396
Microscope slides
397
Microscope slides
398
Microscope slides
399
Slide wallet
400
401
402
Slide boxes
Slide boxes
Slide magazine
403
404
Slide dispenser
Slide mailer
405
406
Test tube
Test tube
407
408
409
410
Test tube
Test tube
Test tube
Test tube
411
412
413
414
415
Test tube
Test tube
Test tube
Test tube
Centrifuge tube
416
Centrifuge tube
Conical bottom - glass - graduated - heat & chemical resistant
417
Centrifuge tube
418
Centrifuge tube
Screw cap - P.P.- non skirted - non sterilized - 15 ml
Screw cap - P.P.- non skirted - sterilized - 15 ml
Cut edges - frosted one side
Ground edges
Yes
No
24 Pcs
Yes
No
24 Pcs
Yes
No
24 Pcs
No
6 Pcs
No
3 Pcs
2 Pcs
2 Pcs
Ground edges - frosted two sides
20 slides - heat resistant injection molded plastic - can hold up to 20 standard Yes
microscope slides of 75x25 mm
Yes
50 slides - high density polystyrene
Yes
Slide boxes - 100 slides - high density polystyrene
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Yes
No
No
Neutral glass - 18x180 mm
Yes
No
Boro 3.3 - 16 x 100 mm - heat & chemical resistant
Yes
No
Boro 3.3 - 16 x 160 mm - heat & chemical resistant
Boro 3.3 - 18 x 180 mm - heat & chemical resistant
Screw cap - 16 x 160 mm - heat & chemical resistant
Yes
No
Yes
No
Yes
No
Conical bottom - glass - non graduated - heat & chemical resistant
Yes
No
1000 Pcs
1000 Pcs
1000 Pcs
1000 Pcs
1000 Pcs
Yes
No
500 Pcs
Yes
No
1000 Pcs
Yes
No
1000 Pcs
200 slides - includes slide box & removable tray
50 slides - provided with transparent removable upper part
5 slides - high density polypropylene - can hold five standard 75x25 mm slides
Neutral glass - 10x75 mm
Neutral glass - 12x100 mm
Neutral glass - 13x100 mm
Neutral glass - 16x100 mm
Neutral glass - 16x160 mm
4 Pcs
6 Pcs
1000 Pcs
1000 Pcs
1000 Pcs
1000 Pcs
1000 Pcs
1000 Pcs
Screw cap - P.P.- non skirted - non sterilized - 50 ml
Yes
No
Screw cap - P.P.- non skirted - sterilized - 50 ml
Yes
No
1000 Pcs
1000 Pcs
Yes
No
1000 Pcs
Yes
No
1000 Pcs
Yes
No
1000 Pcs
Yes
No
100 Pcs
Yes
No
Yes
No
100 Pcs
25 Pcs
Yes
No
25 Pcs
No
6 Pcs
Capacity 100 x 1.5/2 ml vials - polypropylene autoclavable - provided with Yes
transparent cover
No
6 Pcs
No
100 Pcs
Test tube clamp
Test tube clamp
Yes
P.P. - flange type - for tubes 15/16 mm
Yes
Wooden - 25 mm - length 180 mm - hold test tubes upto 25 mm diameter
Test tube clamp - metal - 30 mm - length 150 mm - hold test tubes upto 30 mm Yes
diameter
No
24 Pcs
24 Pcs
Petri dishes
Petri dishes
Petri dishes
Glass - 60x15 mm - heat & chemical resistance - fire polished edges
Glass - 80x15 mm - heat & chemical resistance - fire polished edges
Glass - 100x20 mm - heat & chemical resistance - fire polished
Yes
No
Yes
No
Yes
No
419
420
Centrifuge tube
Centrifuge tube
421
424
Micro centrifuge
tube
Micro centrifuge
tube
Micro centrifuge
tube
Test tube rack
425
426
Test tube rack
Test tube rack
427
Test tube rack
428
Micro centrifuge
tube rack
Steel - dia. 18 mm - 50-hole
Reversible - could hold 96 x 1.5/2 0.1ml micro centrifuge tubes in one side or 96 Yes
x 0.5ml micro centrifuge tubes on other side - tube positions are numbered for
easy identification - provided with clear polypropylene lid - autoclavable
429
Micro centrifuge
tube storage box
430
Test tube stopper
431
432
433
434
435
422
423
P.P. - 0,5 ml - rnase, dnase and PCR inhibitors free
P.P. - 1,5 ml - rnase, dnase and PCR inhibitors free
P.P. - 2,0 ml - rnase, dnase and PCR inhibitors free
P.P. - dia. 16 mm - 60-hole - autoclavable
P.P. - dia. 20 mm - 40-hole - autoclavable
Steel - dia. 16 mm - 50-hole
No
24 Pcs
24 Pcs
100 Pcs
Yes
No
100 Pcs
Yes
No
Yes
No
Yes
No
Yes
No
100Pcs
12 Pcs
12 Pcs
6 Pcs
Micropipette stand
Petri dishes - glass - 120x20 mm - heat & chemical resistance - fire polished
edges
Glass - 150x25 mm - heat & chemical resistance - fire polished edges
Capacity 56 x 60mm petri dishes
Capacity 60 x 90mm petri dishes
Liquid reservoir with spout - graduated 5ml,10m & 25ml- suitable for
multichannel pipettes - volume 55ml - sterile
6 station - without storage
Yes
No
6 Pcs
442
443
Digital burette
Autoclavable at 1210C - supplied with individual calibration certificate
Yes
No
Bottles with Side Arm
Bottles with Side Arm is manufactured from clear borosilicate glass - autoclavable -1000ml
Yes
No
1 Pcs
6 Pcs
444
No
6 Pcs
Yes
No
3 Pcs
446
Bottle top dispensers
Yes
No
2 Pcs
447
Dispensers
Yes
No
1 Pc
448
449
Pipette pump
Pipette pump
Bottles with Side Arm is manufactured from clear borosilicate glass autoclavable -2000ml
Isopenser - 5.0-60.0 ml - meets ISO 8655 - individually calibrated - chemical
resistant
Isopenser - 10.0-100.0 ml - meets ISO 8655 - individually calibrated - chemical
resistant
Zipette - 1.0-50.0 ml - individually calibrated - autoclavable in 121 0C - chemical
resistant
Electrical - fixed nozzle
Electrical - adjustable nozzle
Yes
445
Bottles with Side
Arm
Bottle top dispensers
Yes
Yes
No
No
2 Pcs
2 Pcs
450
Pipette
No
15 Pcs
451
Pipette
Pipette Filler for all types of pipettes. Filler has ball valves which can be Yes
controlled by finger pressure- 100ml
Pipette filler controllable pipette filler, which is designed to give superior Yes
pipetting control from 1-100ml
No
10 Pcs
436
Petri dishes
437
438
439
440
Petri dishes
Petri dishes
Petri dishes
Liquid reservoir
441
Signature of the Bidder ………………………
………………………………………….
(Common Seal of the Company)
Name & address of the Company - …………………………………….…………….……
Annexure A : Specification for Supplies
Package FOUR: Laboratory Furniture
EMD = 200,000
Nr Laboratory
Furnitures
1
Equipment Cart
Specification
Glass ware Cart
Required
Number
Essential Specifications & Features
Yes
Yes
Yes
Yes
No
No
No
No
2
1) It has a drip pan below the removable plastic – coated wire baskets.
2) No of baskets: 4-6
3) Dimensions (LxWxH): 100 to 120cmx60 to 80cmx110 to 130cm
Yes
Yes
Yes
No
No
No
1
Desirable Specifications & Features
Yes
No
1) Chemical and heat resistant shelves.
2) Dimensions (LxWxH): 1000 to 1100cmx60 to 80cmx110 to 120cm
3) Capacity: 180-250 kg
Yes
Yes
Yes
No
No
No
Desirable Specifications & Features
1) High pressure laminate with melamine exterior resists acids, Caustics, Heat,
Yes
No
1.
2.
3.
4.
2
The most
appropriat
e answer
Stainless Steel cards with stand chemical spills.
Shelf area: (Lx W):60 to 80cm-50 to 70cm
No of shelves: 3-5
Capacity : 90-100kg
Essential Specifications & Features
1. This makes it ideal for collecting glassware and small equipment for washing
and dryer.
3
Chemical Cart
Essential Specifications & Features
Stains and Shocks.
1
4
Laboratory
Security Cart
Essential Specifications & Features
1.
2.
3.
4.
5.
6.
Stainless steel wire cage and one solid stainless steel top shelf.
Shelf area: (LxW):100 to 120cm-75to 100cm
No of shelves: 1 - 3
Capacity: 270-300kg
Cage height: 50 - 70cm
Over all height: 120 - 150cm
Desirable Specifications & Features
1. Cage lock with padlock by securing front wire door and bottom wire shelf
together.
2. Front cage door flips up and slides underneath top shelf for loading and
unloading.
5
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
Yes
Yes
No
No
Mobile Laboratory Essential Specifications & Features
1. Work top –Phenolic laminate / Epoxy resin, Structure-Epoxy powder coated Yes
Work Table
steel.
Yes
2. Surface area (LxW) 100 -120 x100 - 120cm.
No
1
1
No
Desirable Specifications & Features
1. Smooth, Stainless steel work surface with bull – nose front edge and Yes
backsplash is durable and easy to clean
Yes
2. Polymer posts and frame are lightweight and will not corrode
Yes
3. Smooth – rolling polyurethane casters are nonmarking
Yes
4. Two braking casters secure table in place
6
7
Portable
Desiccators
cabinet
Sink cabinet
assemblies
No
No
No
No
Essential Specifications & Features
Built-in Yes
No
1
Yes
1. Single cabinet unit with sink. It can be put any location within facility.
2. Includes a black epoxy resin sink, deck mount faucet, sink hangers and Yes
fillers.
No
No
1
1. Horizontal orientation,
hygrometer.
patented
airtight-seal
construction,
Essential Specifications & Features
8
Standing Height
wall assemblies
with fume hood
Essential Specifications & Features
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Yes
Yes
Yes
No
No
No
No
Yes
No
Yes
1. Power-coated steel construction
Yes
2. Available with hinged or sliding doors
3. These wall cabinets are designed to provide easy storage of lab equipment Yes
and chemicals by allowing adjusting the shelves for whatever height.
No
1. Cabinet units come complete with sink and constant volume/bypass fume
hood.
2. Fume hood include remote control service fixtures and a cup sink.
3. Fume hood requires blower and ductwork, order blowers separately.
4. Four cabinet units come complete with sink and constant volume/bypass
fume hood.
Desirable Specifications & Features
1. Black epoxy resin sink includes a deck-mount faucet
9
Standing Height
wall assemblies
with sink
1
Essential Specifications & Features
1.
2.
3.
4.
Cabinet units come complete with black epoxy resin sink
deck-mount faucet
Sink hangers.
Four cabinet units come complete with black epoxy resin sink, deck-mount
faucet
1
Desirable Specifications & Features
1) Sink hangers, and plastic P-trap
10
11
12
Upper wall cabinet
Slide Storage
System
Laboratory Stool
Essential Specifications & Features
3
No
No
Essential Specifications & Features
1. Durable, secure storage for 1000 to 1100-2000 to 2100slides
2. Each slide storage drawer hold up to 1000 to 1100-2000 to 2100 slides.
Yes
Yes
No
No
3
Yes
Yes
No
No
12
Essential Specifications & Features
1. Wood construction for lasting performance
2. Choice of black epoxy resin or laminate work surface.
13
14
15
Laboratory Tables
Storage Cabinet
Center table
Essential Specifications & Features
Yes
1. Solid wood construction for lasting performance
Yes
2. Choice of black epoxy resin or laminate work surface
Yes
3. These solid wood laboratory tables are specially designed for the demands of
the laboratory environment.
No
No
No
6
No
No
No
2
1
Essential Specifications & Features
Yes
1. Power-coated steel construction
Yes
2. Glass doors allow viewing of contents
Yes
3. These storage cabinets provide ample storage for anything from glassware to
reagents.
Essential Specifications & Features
1. Solid wood construction for lasting performance
2. Choice of black epoxy resin or laminate work surface adjustable cabinet
3. Movable cabinet
Yes
Yes
Yes
No
No
No
Desirable Specifications & Features
Yes
No
1) Easy maintenance.
Signature of the Bidder ………………………
………………………………………….
(Common Seal of the Company)
Name & address of the Company - …………………………………….…………….……
………………………………………………………..
…….…………….……………………………………
……………….…………….………..........................
Annexure A : Specification for Supplies
Package FIVE : Vehicle
EMD = 500,000
Nr Vehicle
1
DOUBLE CAB 4WD
(Country of
Origin-India)
Specification
The most
appropriat
e answer
Required
Number
Essential Specifications & Features
1.
2.
3.
4.
5.
4 stroke
4 Cylinder
Cubic Capacity:- 2000-3000cc
Tank Capacity: - 80-150 Liters Diesel
Safety :- Collapsible steering column & Side intrusion beams
Crash protecting crumple zones & child locks
Tilt able Steering
Fire Resistant Upholstery
Protective Side Cladding
Rear Demister
Vehicle Security & Remote Locking
6. Manufactured in India
Desirable Specifications & Features
1. Convenience :- Power Steering
Air-conditioner
Motorized Head Lamps
Side steps
Power windows
2. Central locking with remote
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
4
Max Gross Power:- 100-200bhp @ 3500-4500r.p.m
Max Gross Torque:- 24.Skgm @ 1500-2500r.p.m
Transmission:- 5 Speed Manual
Ground Clearance :- 200-300rnm
Max GVW :- 3000-5000Kg
Turning Circle Radius :- 6.0-7.0m
Luxury :- "Follow Me Home" headlamps
12V Charging Slot\ 4 speaker CD/MP3 player with USB/CD card port.
Signature of the Bidder ………………………
………………………………………….
(Common Seal of the Company)
Name & address of the Company - …………………………………….…………….……
………………………………………………………..
…….…………….……………………………………
……………….…………….………..........................
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
Annexure B: Price Schedule Form
B- 1 : Price Schedule for Supply and Installation of Laboratory
Equipment
No Laboratory
Equipment
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Auto clave
Bench centrifuge
Refracto meter
Dissolved oxygen
meter
Hydrometer
Laboratory
thermometer
Thermostatic water
bath
Water still
Rotary evaporator
Kiel dhal
apparatus
Colorimeter
Timer
Humidity meter
Verniner caliber
gauge
Bench pH meter
Electronic
analytical balance
Incubator
Filteration
assembles set.
Biological
microscope
Sterilizer
Conductivity meter
Soxelets apparatus
HPLC
UV
Req.
No
02
02
01
02
10
10
02
02
01
01
02
10
01
02
02
02
02
01
03
02
02
01
01
01
Rate per
Unit
(SLR. or
INR. as
applicabl
e,
Without
Custom
duty and
taxes )
Custom
duty,
Sales Tax
or other
taxes
(SLR. or
INR. as
applicabl
e)
Total amount
with Custom
duty and
taxes (SLR.
or INR. as
applicable)
Total
amount
without
Custom
duty and
taxes (SLR.
or INR. as
applicable)
25
26
27
28
29
30
31
Spectrophotometer.
Lamina flow
Magnetic stirrer
Moisture
determiner
Muffle furnace
Heating mantle
Turbidity Meter
01
02
01
01
02
01
Vacuum pump - oil
free
Gas
Chromatography
Laboratory oven
Deep freezer
Refrigerator
Digital Industrial
Gauge
Three-Range Brix
Refractometer.
Digital Stirring Hot
Plate
Slide projector
01
40
Over head
projector
01
41
Spray drier
01
42
UV lamp (250 - 300
nm)
01
43
Water Purification
System
Viscosity meter
01
Trible beam
balance
Large-Capacity
Console Humidifier
Compact
Dehumidifiers
Multipurpose
Burners.
Vacuum packing
machine
Homogenizer
Ebullo meter:
Yeast separate
centrifuge:
Grand Total
01
32
33
34
35
36
37
38
39
44
45
46
47
48
49
50
51
52
01
01
01
01
02
03
01
01
01
02
02
08
02
01
01
01
(Please submit separate forms for any alternate models proposed)
VAT registration number ……………………………………………………………… (if
applicable)
Total amount in words; Sri Lankan Rupees
…………………………………………………………………
………………………………………………………………………………………………
…….
Signature of the Bidder ………………………
………………………………………….
(Common Seal of the Company)
Name & address of the Company …………………………………….…………….……
………………………………………………………..
…….…………….……………………………………
……………….…………….………..........................
Name address of the Authorized Officers: ………………………………………….……
……….………….……………………………
……………………….…………….…….……
Telephone Number - ……………………….
Fax Number ……………………………………
Date …………/ ..…/ 2011
Annexure B: Price Schedule Form
B -2 : Price Schedule for Supply of Laboratory Chemicals
No
Laboratory Chemical
Pack
Size
Req.
No
2.5L
2.5L
3
9
8
Organic Solvents
1
2
3
Ethanol
Ethanol (Repacked)
Methanol ( AR )
4
5
Acetone ( AR )
Chloroform ( AR ),
6
1,2-Dichloroethane, puriss.
1L
p.a., ACS reagent,
≥99.5%
Toluene ( AR )
2.5L
Diethyl ether (stabilised) 2.5
( LR )
L
Petroleum ether 40 2.5
60 C ( AR )
L
Acetaldehyde ,
1
ReagentPlus®, 99%
L
Aniline
, 1
L
ReagentPlus®, 99%
Benzene ( AR ),
2.5L
Benzaldehyde ,
1
ReagentPlus®, ≥99%
L
500ml
Chlorobezene ( AR )
Cyclohexane ( AR )
2.5L
Cyclohexanol ,
1L
ReagentPlus®, 99%
Cyclohexanone ,
1
puriss. p.a., ≥99.5% (GC)
L
N,N-Dimethylformamide , 1
≥99% (GC)
L
Dichloromethane ( AR ) 500ml
Fehling Solution No. 1
500ml
Fehling Solution No. 500m
l
2
Formaldehyde
1L
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
500
ml
2.5L
500
ml
9
15
2
3
7
2
3
8
4
2
6
2
5
2
2
20
6
5
3
Rate per
Unit
(SLR. or
INR. as
applicabl
e,
Without
Custom
duty and
taxes)
Custom
duty,
Sales
Tax or
other
taxes
(SLR. or
INR. as
applicabl
e)
Total
amount
with
Custom
duty and
taxes
(SLR. or
INR. as
applicabl
e)
Total
amount
without
Custom
duty and
taxes
(SLR. or
INR. as
applicabl
e)
23
24
solution
Glycerol
Acetonitrile ( AR )
25
L-Ascorbic acid, A.R.
36
Organic Chemicals
D-(+)-Glucose,
anhydrous, A.R.
Sucrose, A.R.
Sodium
acetate,
anhydrous, A.R.
Potassium sodium
tartrate, tetrahydrate
Citric
acid,
monohydrate, A.R.
Oxalic
acid,
dihydrate, A.R.
Stearic acid , reagent
grade, 95%
Ethylenediaminetetra
acetic acid, A.R.
Urea , puriss. p.a.,
ACS
reagent,
≥99.5% (T)
Starch
solution
,
indicator, 1% in H2O
Phenol crystal ( AR )
37
Benzoic acid, A.R.
26
27
28
29
30
31
32
33
34
35
38
39
40
41
42
43
44
45
46
Acid & Bases
Hydrochloric
acid
abt.35 % pure ( AR )
Sulfuric acid abt 98
% pure ( AR )
Nitric acid min. 69 %
pure ( AR )
Acetic acid Galcial
Phosphoric acid
Formic acid
Ammonia solution , 7
N in methanol
Sodium
hydroxide
solution , 50% in H2O
Sodium bicarbonate
(Sodium hydrogen
carbonate ) , A.R.
1L
500
ml
500 g
1
4
500 g
8
500 g
500 g
8
15
500 g
3
500 g
15
500 g
15
100 g
5
100 g
50
250 g
10
100
ml
500
g
500 g
5
25
2.5L
50
500
ml
500
ml
2.5L
1L
1L
1L
100
1L
20
500
30
g
5
20
100
15
15
15
2
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
Sodium
carbonate,
500
g
anhydrous, A.R
Potassium hydroxide
1L
solution , 50%
Potassium carbonate,
500
g
anhydrous, A.R.
Inorganic
Chemicals
Copper (II) sulfate
pentahydrate
Copper (II) sulfate
Ammonium sulphate,
A.R.
Barium
chloride,
dihydrate, A.R.
Calcium
chloride,
anhydrous, A.R.
Ammonium
bicarbonate
(Ammonium
hydrogen carbonate
), A.R.
Ammonium chloride,
A.R.
Ammonium acetate,
A. R.
Ferric
chloride,
hexahydrate, A.R.
Ferrous
sulfate
heptahydrate
(Iron
(II)
sulfate
heptahydrate)
Magnesium chloride,
hexahydrate, A.R.
Magnesium sulphate,
anhydrous, A.R.
Potassium
acetate,
anhydrous, ACS
Potassium
chloride,
A.R.
Silica gel
Potassium
iodide,
A.R.
Potassium phosphate
dibasic, A.R.
Potassium phosphate,
monobasic, ACS
30
10
30
250 g
15
100 g
500 g
15
20
500 g
20
500 g
20
500 g
30
500 g
30
500 g
30
500 g
30
100 g
30
500 g
30
500 g
30
500 g
30
500 g
30
500 g
100 g
10
10
500 g
15
500 g
15
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
Potassium hydrogen
phthalate, A.R.
Sodium chloride, A.R.
Sodium
metabisulphite
(Sodium pyrosulphite
), A.R.
Tin(II)
chloride
,
reagent grade, 98%
Zinc chloride Dry AR
98%
Ammonium
molybdate,
tetrahydrate, A.R.
Sodium thiosulphate,
anhydrous, A.R.
Potassium
permanganate,
Potassium
dichromate, A.R.
Potassium chromate ,
Silver nitrate
Selenium dioxide ,
≥99.9%
Boric acid
Sodium
sulphate,
anhydrous, A.R.
Potassium sulphate,
A.R.
Hydrogen
peroxide
solution , purum p.a.,
≥30% (RT)
Miscellaneous
Material
Parafilm
500 g
15
500 g
500 g
15
15
100 g
5
500 g
10
100 g
5
500 g
15
100 g
5
500 g
20
250 g
100 g
5g
4
4
4
500 g
500 g
10
20
500 g
20
500
ml
15
1
meter
Qualitative
filter 100
nos
papers
in a
pack
Indicator pH Paper
200
nos in
a
pack
Silicon dioxide
1 kg
Methyl
orange,
10 g
Certified
10
100
100
2
20
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
Methyl red, Certified
pH indicator
Methylene
blue,
Certified
Phenolphthalein , pH
indicator
Fluorescein , Reag.
Ph. Eur., free acid
Iodine, A.R.
Sodium
benzoate,
A.R.
Sorbic acid , ≥99.0%
10 g
20
100 g
20
100 g
5
25 g
15
100 g
500 g
10
20
100 g
15
Chromato Graphic
and Purification
Material
Silica gel on TLC 25
nos in
plates
a
pack
Silica gel
250 g
Cellulose
, 250 g
microcrystalline,
powder
Fuller’s earth , 1001 kg
200 mesh
Kaolin , Ph Eur
1 kg
Alum
(Aluminum 500 g
potassium
sulfate
dodecahydrate)
Activated
charcoal, 250 g
purum p.a.
Sephadex® G-25 ,
10 g
Fine
Micro
Biology
Media
Potato Dextrose Agar
Nutrient Agar
Peptone,
Bacteriological
Yeast Extract Powder
Potato powder
Grand Total
1
2
4
2
2
10
10
3
100 g
100 g
500 g
15
16
5
500 g
100 g
5
20
(Please submit separate forms for any alternate models proposed)
VAT registration number ……………………………………………………………… (if
applicable)
Total amount in words; Sri Lankan Rupees
…………………………………………………………………
………………………………………………………………………………………………
…….
Signature of the Bidder ………………………
………………………………………….
( Common Seal of the Company)
Name & address of the Company …………………………………….…………….……
………………………………………………………..
…….…………….……………………………………
……………….…………….………..........................
Name address of the Authorized Officers: ………………………………………….……
……….………….……………………………
……………………….…………….…….……
Telephone Number - ……………………….
Fax Number ……………………………………
Date …………/ ..…/ 20010
Annexure B: Price Schedule Form
B-3 : Price Schedule for Supply of Laboratory Glassware
No
1
2
3
4
5
6
7
8
Laboratory Glass ware
volumetric flask - with
polypropylene stopper
borosilicate glass - resistant
to heat and chemicals - 5 ml
volumetric flask - with
polypropylene stopper
borosilicate glass - resistant
to heat and chemicals - 10 ml
volumetric flask - with
polypropylene stopper
borosilicate glass - resistant
to heat and chemicals - 20ml
volumetric flask - with
polypropylene stopper
borosilicate glass - resistant
to heat and chemicals - 25 ml
volumetric flask - with
polypropylene stopper
borosilicate glass - resistant
to heat and chemicals - 50 ml
volumetric flask - with
polypropylene stopper
borosilicate glass - resistant
to heat and chemicals - 100
ml
volumetric flask - with
polypropylene stopper
borosilicate glass - resistant
to heat and chemicals - 250
ml
volumetric flask - with
polypropylene stopper
borosilicate glass - resistant
to heat and chemicals - 500
Req.
No
15 Pcs
30 Pcs
30 Pcs
30 Pcs
30 Pcs
30 Pcs
15 Pcs
15 Pcs
Rate
per Unit
(SLR. or
INR. as
applicab
le,
Without
Custom
duty
and
taxes)
Custom
duty,
Sales
Tax or
other
taxes
(SLR. or
INR. as
applicabl
e)
Total
amount
with
Custom
duty and
taxes
(SLR. or
INR. as
applicabl
e)
Total
amount
without
Custom
duty and
taxes
(SLR. or
INR. as
applicable
)
9
10
11
12
13
14
15
16
17
18
19
20
ml
volumetric flask - with
polypropylene stopper
borosilicate glass - resistant
to heat and chemicals - 1000
ml
Volumetric flask - 1ml borosilicate glass trapezoidal – clear - P.P
stopper - heat & chemical
resistant
Volumetric flask - 2ml borosilicate glass trapezoidal – clear - P.P
stopper - heat & chemical
resistant
Volumetric flask - 5ml borosilicate glass trapezoidal – clear - P.P
stopper - heat & chemical
resistant
Measuring cylinder - 5ml borosilicate glass - glass base
- tall form - heat & chemical
resistant
Measuring cylinder - 10ml borosilicate glass - glass base
- tall form - heat & chemical
resistant
Measuring cylinder - 25ml borosilicate glass - glass base
- tall form - heat & chemical
resistant
Measuring cylinder - 50ml borosilicate glass - glass base
- tall form - heat & chemical
resistant
Measuring cylinder - 100ml borosilicate glass - glass base
- tall form - heat & chemical
resistant
Measuring cylinder - 250ml borosilicate glass - glass base
- tall form - heat & chemical
resistant
Measuring cylinder - 500ml borosilicate glass - glass base
- tall form - heat & chemical
resistant
Measuring cylinder - 1000ml
10 Pcs
5 Pcs
5 Pcs
5 Pcs
25 Pcs
25 Pcs
25 Pcs
25 Pcs
25 Pcs
25 Pcs
25 Pcs
15 Pcs
21
22
23
24
25
26
27
28
29
30
31
32
33
34
- borosilicate glass - glass
base - tall form - heat &
chemical resistant
Measuring cylinder - 2000ml
- borosilicate glass - glass
base - tall form - heat &
chemical resistant
Mixing cylinder - 10ml borosilicate glass - glass base
- tall form - heat & chemical
resistant
Mixing cylinder - 25ml borosilicate glass - glass base
- tall form - heat & chemical
resistant
Mixing cylinder - 50ml borosilicate glass - glass base
- tall form - heat & chemical
resistant
Mixing cylinder - 100ml borosilicate glass - glass base
- tall form - heat & chemical
resistant
Mixing cylinder - 250ml borosilicate glass - glass base
- tall form - heat & chemical
resistant
Mixing cylinder - 500ml borosilicate glass - glass base
- tall form - heat & chemical
resistant
Mixing cylinder - 1000ml borosilicate glass - glass base
- tall form - heat & chemical
resistant
Burette - 10ml - straight heat & chemical resistant
Burette - 25ml - straight heat & chemical resistant
Burette - 50ml - straight heat & chemical resistant
Burette - 10ml - borosilicate
glass - needle valve stopcock
- heat & chemical resistant
Burette - 25ml - borosilicate
glass - needle valve
stopcock - heat & chemical
Burette - 50ml - borosilicate
glass - needle valve stopcock
10 Pcs
15 Pcs
15 Pcs
15 Pcs
15 Pcs
15 Pcs
15 Pcs
15 Pcs
25 Pcs
25 Pcs
25 Pcs
10 Pcs
10Pcs
10Pcs
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
- heat & chemical resistant Burette - automatic - 10ml borosilicate glass - chemicals
& heat resistance - (Note: not
included reservoir bottle &
bellow, need to order
separately)
Burette - automatic - 25ml borosilicate glass - chemicals
& heat resistance - (Note: not
included reservoir bottle &
bellow, need to order
separately)
Burette - automatic - 50ml borosilicate glass - chemicals
& heat resistance - (Note: not
included reservoir bottle &
bellow, need to order
separately)
Burette - automatic - 10ml modular - complete with
burette liquid reservoir
polypropylene 1000ml,
burette clamp & laboratory
stand
Burette - automatic - 25ml modular - complete with
burette liquid reservoir
polypropylene 1000ml,
burette clamp & laboratory
stand
Burette - automatic - 50ml modular - complete with
burette liquid reservoir
polypropylene 1000ml,
burette clamp & laboratory
stand
burette bottle - Clear - 2 lit
burette bottle - Amber - 2 lit
pipette - graduated - 1ml
pipette - graduated - 2ml
pipette - graduated - 5ml
pipette - graduated - 10ml
pipette - graduated - 20ml
pipette - graduated - 25ml
pipette - graduated - 50ml
pipette - volumetric - 1ml
pipette - volumetric - 2ml
pipette - volumetric - 3ml
3 Pcs
3 Pcs
3 Pcs
4 Pcs
5 Pcs
5 Pcs
10 Pcs
10 Pcs
25 Pcs
25 Pcs
25 Pcs
25 Pcs
25 Pcs
25 Pcs
15 Pcs
15 Pcs
15 Pcs
15 Pcs
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
pipette - volumetric - 4ml
pipette - volumetric - 5ml
pipette - volumetric - 10ml
pipette - volumetric - 15ml
pipette - volumetric - 20ml
pipette - volumetric - 25ml
pipette - volumetric - 50ml
pipette stand - vertical - 94
pipettes, - polypropylene
pipette stand - horizontal - 12
pipettes, - polypropylene
density bottle - calibrated - 5
ml
density bottle - calibrated 10 ml
density bottle - calibrated 25 ml
density bottle - calibrated 50 ml
density bottle - calibrated 100 ml
beaker - low form - 25 ml borosilicate glass - heat &
chemical resistant - thick
walled & heavy base reinforced ring
beaker - low form - 50 ml borosilicate glass - heat &
chemical resistant - thick
walled & heavy base reinforced ring
beaker - low form - 100 ml borosilicate glass - heat &
chemical resistant - thick
walled & heavy base reinforced ring
beaker - low form - 150 ml borosilicate glass - heat &
chemical resistant - thick
walled & heavy base reinforced ring
beaker - low form - 250 ml borosilicate glass - heat &
chemical resistant - thick
walled & heavy base reinforced ring
beaker - low form - 400 ml borosilicate glass - heat &
chemical resistant - thick
15 Pcs
15 Pcs
15 Pcs
15 Pcs
15 Pcs
15 Pcs
15 Pcs
10 Pcs
10 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
25 Pcs
15 Pcs
25 Pcs
25 Pcs
25 Pcs
25 Pcs
73
74
75
76
77
78
79
80
81
82
83
84
85
walled & heavy base reinforced ring
beaker - low form - 600 ml borosilicate glass - heat &
chemical resistant - thick
walled & heavy base reinforced ring
beaker - low form - 800 ml borosilicate glass - heat &
chemical resistant - thick
walled & heavy base reinforced ring
beaker - low form - 1000 ml
- borosilicate glass - heat &
chemical resistant - thick
walled & heavy base reinforced ring
beaker - low form - 25ml clear polypropylene chemical resistant –
autoclavable at 1210C
beaker - low form - 50ml clear polypropylene chemical resistant autoclavable at 1210C
beaker - low form - 100ml clear polypropylene chemical resistant autoclavable at 1210C
beaker - low form - 250ml clear polypropylene chemical resistant autoclavable at 1210C
beaker -low form - 500ml clear polypropylene chemical resistant autoclavable at 1210C
beaker -low form -1000ml clear polypropylene chemical resistant autoclavable at 1210C
beaker jug - 250ml Polypropylene - chemical
resistant
beaker jug - 500ml Polypropylene - chemical
beaker jug - 1000ml Polypropylene - chemical
resistant
Flask Erlenmeyer - 50ml -
25 Pcs
25 Pcs
25 Pcs
25
PCs
25 Pcs
25 Pcs
25 Pcs
25 Pcs
15 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
86
87
88
89
90
91
92
93
94
95
96
97
98
medium neck - borosilicate
glass - chemical & heat
resistant - thick walls and
heavy bases
Flask Erlenmeyer - 100ml medium neck - borosilicate
glass - chemical & heat
resistant - thick walls and
heavy bases
Flask Erlenmeyer - 250ml medium neck - borosilicate
glass - chemical & heat
resistant - thick walls and
heavy bases
Flask Erlenmeyer - 300ml medium neck - borosilicate
glass - chemical & heat
resistant - thick walls and
heavy bases
Flask Erlenmeyer - 500ml medium neck - borosilicate
glass - chemical & heat
resistant - thick walls and
heavy bases
Flask Erlenmeyer - 1000ml medium neck - borosilicate
glass - chemical & heat
resistant - thick walls and
heavy bases
Flask - flat bottom - 50 ml borosilicate glass - chemical
& heat resistant
Flask - flat bottom - 100 ml borosilicate glass - chemical
& heat resistant
Flask - flat bottom - 250 ml borosilicate glass - chemical
& heat resistant
Flask - flat bottom - 500 ml borosilicate glass - chemical
& heat resistant
Flask - flat bottom - 1000 ml
- borosilicate glass chemical & heat resistant
Flask - flat bottom - 2000 ml
- borosilicate glass
Flask - round bottom - 50 ml
- borosilicate glass chemical & heat resistant
Flask - round bottom - 100
10 Pcs
10 Pcs
10 Pcs
5 Pcs
5 Pcs
25 Pcs
25 Pcs
25 Pcs
15 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
ml - borosilicate glass chemical & heat resistant
Flask - round bottom - 250ml
- borosilicate glass chemical & heat resistant
Flask - round bottom - 500ml
- borosilicate glass chemical & heat resistant
Flask - round bottom 1000ml - borosilicate glass chemical & heat resistant
Flask - round bottom 2000ml - borosilicate glass chemical & heat resistant
Flask tongs - stainless steel with insulated jaws - suitable
for all types of flasks
Flask stand - 100ml - made
of cork - suitable for round
bottom flasks
Flask stand - 250ml - made
of cork - suitable for round
bottom flasks
Flask stand - 500ml - made
of cork - suitable for round
bottom flasks
Flask stand - 1000ml - made
of cork - suitable for round
bottom flasks
Flask - pear shape - 10ml borosilicate glass - chemical
& heat resistant
Flask - pear shape - 25 ml borosilicate glass - chemical
& heat resistant
Flask - pear shape - 50ml borosilicate glass - chemical
& heat resistant
Flask - pear shape - 100ml borosilicate glass - chemical
& heat resistant
Flask – Kjeldhal - 100ml borosilicate glass - chemical
& heat resistant - heavy wall
Flask - Kjeldhal - 250ml borosilicate glass - chemical
& heat resistant - heavy wall
Flask - Kjeldhal - 500ml borosilicate glass - chemical
15 Pcs
10 Pcs
10 Pcs
10 Pcs
15 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10
PCs
10 Pcs
10
PCs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
115
116
117
118
119
120
121
122
123
124
125
126
127
128
& heat resistant - heavy wall
Flask - Kjeldhal - 750ml borosilicate glass - chemical
& heat resistant - heavy wall
Flask - Kjeldhal - 1000ml borosilicate glass - chemical
& heat resistant - heavy
Flask - evaporating - 10ml borosilicate glass - chemical
& heat resistant - heavy wall
Flask - evaporating - 250ml borosilicate glass - chemical
& heat resistant - heavy wall
Flask - evaporating - 500ml borosilicate glass - chemical
& heat resistant - heavy wall
Flask - evaporating - 1000ml
- borosilicate glass chemical & heat resistant heavy wall
Flask - receiving - 100ml borosilicate glass - chemical
& heat resistant - heavy wall
Flask - receiving - 250ml borosilicate glass - chemical
& heat resistant - heavy wall
Flask - receiving - 500ml borosilicate glass - chemical
& heat resistant - heavy wall
Flask - receiving - 1000 ml borosilicate glass - chemical
& heat resistant - heavy wall
Flask - flat bottom - 50ml NS neck- 19/26 - borosilicate
glass - chemical & heat
resistant - thick wall & heavy
base
Flask - flat bottom - 50ml NS neck- 24/29 - borosilicate
glass - chemical & heat
resistant - thick wall & heavy
base
Flask - flat bottom - 100ml
NS neck- 19/26 - borosilicate
glass - chemical & heat
resistant - thick wall & heavy
base
Flask - flat bottom - 100ml -
10 Pcs
5 Pcs
10 Pcs
10
PCs
15
PCs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
129
130
131
132
133
134
135
136
137
138
139
140
141
NS neck- 24/29 - borosilicate
glass - chemical & heat
resistant - thick wall & heavy
base
Flask - flat bottom - 250ml NS neck- 19/26 - borosilicate
glass - chemical & heat
resistant - thick wall & heavy
base
Flask - flat bottom - 250ml NS neck- 24/29 - borosilicate
glass - chemical & heat
resistant - thick wall & heavy
base
Flask - flat bottom - 500ml NS neck- 24/29 - borosilicate
glass - chemical & heat
resistant - thick wall & heavy
base
Flask - flat bottom - 500ml NS neck- 29/32 - borosilicate
glass - chemical & heat
resistant - thick wall & heavy
base
Flask - flat bottom - 1000ml
- NS neck- 24/29 borosilicate glass - chemical
& heat resistant - thick wall
& heavy base
Flask - flat bottom - 1000ml
- NS neck- 29/32 borosilicate glass - chemical
& heat resistant - thick wall
& heavy base
Flask - round bottom - NS
neck- 29/32 - 50ml
flask - round bottom - NS
neck- 19/26 - 100ml
flask - round bottom - NS
neck- 19/26 - 250ml
flask - round bottom - NS
neck- 24/29 - 500ml
flask - round bottom - NS
neck- 24/29 - 1000ml
flask - round bottom - NS
neck- 29/32 - 2000ml
flask - parallel side arm 100ml - 2 NS Necks - center
29/32 - arm 14/23 borosilicate glass - chemical
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
& heat resistant - thick wall
& heavy base
flask - parallel side arm 250ml - center 29/32 - arm
14/23
flask - parallel side arm 500ml - center 29/32 - arm
14/23
flask - parallel side arm 1000ml - center 29/32 - arm
14/23
flask - parallel side arm 250ml - 2 NS Necks - center
29/32 - arm 29/32 borosilicate glass - chemical
& heat resistant - thick wall
& heavy base
flask - round bottom angled
side arms - center 29/32 arm 14/23 - 250ml
flask - round bottom angled
side arms - center 29/32 arm 14/23 - 500ml
flask - round bottom angled
side arms - center 29/32 arm 14/23 - 1000ml
flask - round bottom angled
side arms - center 29/32 arm 19/26 - 250ml
separating funnel - Squibb 50ml - graduated - PTFE
stopcock
separating funnel - Squibb graduated - PTFE stopcock 100ml
separating funnel - Squibb graduated - PTFE stopcock 250ml
separating funnel - Squibb graduated - PTFE stopcock 500ml
separating funnel - Squibb graduated - PTFE stopcock 1000ml
condenser - Liebig - glass
water connector - 300mm NS 29/32 - borosilicate glass
condenser - Liebig - glass
water connector - 400mm -
5 Pcs
5 PCs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
NS 29
condenser - Allihn - glass
water connector - 300mm NS 29/32 - borosilicate glass
condenser - Allihn - glass
water connector - 400mm NS 29
Soxhlet condenser - Allihn - 300mm - NS 45/40 - glass
condenser - Soxhlet - Allihn
- glass water connector 400mm
Soxhlet condenser - Dimroth
- glass water connector 300mm - NS 45/40 borosilicate glass
condenser - Soxhlet Dimroth - glass water
connector - 400mm
extractor - Soxhlet - without
stopcock - NS 29/32 - NS
45/40 - 100ml
extractor - Soxhlet - without
stopcock - NS 29/32 - NS
45/40 - 150ml
extractor - Soxhlet - without
stopcock - NS 29/32 - NS
45/40 - 250ml
extractor - Soxhlet - without
stopcock - NS 29/32 - NS
45/40 - 500ml
watch glasses - 50mm borosilicate glass - polished
edge - resistant to heat and
chemicals
watch glasses - 60mmborosilicate glass - polished
edge - resistant to heat and
chemicals
watch glasses - 70mmborosilicate glass - polished
edge - resistant to heat and
chemicals
watch glasses - 80mmborosilicate glass - polished
edge - resistant to heat and
chemicals
watch glasses - 100mmborosilicate glass - polished
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 PCs
5 Pcs
25 Pcs
25 Pcs
25 Pcs
10 Pcs
10 Pcs
172
173
174
175
176
177
178
edge - resistant to heat and
chemicals
watch glasses - 125mmborosilicate glass - polished
edge - resistant to heat and
chemicals
weighing bottles - 30x50mm
- borosilicate glass - resistant
to heat and chemicals - white
labeling area for making
notes
weighing bottles 35x30mm- borosilicate glass
- resistant to heat and
chemicals - white labeling
area for making notes
weighing bottles 35x70mm- borosilicate glass
- resistant to heat and
chemicals - white labeling
area for making notes
weighing bottles 50x30mm- borosilicate glass
- resistant to heat and
chemicals - white labeling
area for making notes
weighing bottles 50x80mm- borosilicate glass
- resistant to heat and
chemicals - white labeling
area for making notes
weighing bottles 60x30mm- borosilicate glass
- resistant to heat and
chemicals - white labeling
area for making notes
5 Pcs
10 Pcs
10 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
179
weighing bottles - 80x30mmborosilicate glass - resistant to
heat and chemicals - white
labeling area for making notes
5 Pcs
180
weighing boats - 30ml - P.P white - antistatic - non sterile
weighing boats - white antistatic - non sterile 100ml
scoop - stainless steel 50mm diameter
scoop - stainless steel 75mm diameter
scoop - stainless steel -
25 Pcs
181
182
183
184
25 Pcs
10 Pcs
10 Pcs
5 Pcs
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
100mm diameter
scoop - stainless steel 5 Pcs
120mm diameter
5 Pcs
scoop - P.P - 25ml
scoop - P.P - 50ml
5 Pcs
scoop - P.P - 100ml
5 pcs
scoop - P.P - 250ml
5 Pcs
scoop - P.P - 500ml
5 Pcs
scoop - P.P - 1000ml
5 Pcs
porcelain mortar + pestle 5 Pcs
75mm
porcelain mortar + pestle 5 Pcs
100mm
porcelain mortar + pestle 5 Pcs
125mm
porcelain mortar + pestle 5 Pcs
150mm
dish tong - stainless steel 15 Pcs
300mm - high heat resistant
upto 10000C
crucible tong - stainless steel 10 Pcs
- 300mm- porcelain - - high
heat resistant up to 10000C
agate mortars with pestle 1 Pc
ext. Dia 50mm,Manufactured
from natural occuring agate
stone, hardness 6.5
agate mortars with pestle 1 Pc
ext. Dia 75mm,Manufactured
from natural occuring agate
stone, hardness 6.5
agate mortars with pestle 2 Pcs
ext. Dia 100
mm,Manufactured from
natural occuring agate stone,
hardness 6.5
casseroles - porcelain 5 Pcs
140ml
casseroles - porcelain 5 Pcs
200ml
evaporating dish - porcelain - 5 Pcs
flat bottom - 60mm
evaporating dish - porcelain - 5 Pcs
flat bottom - 80mm
evaporating dish - porcelain - 5 Pcs
flat bottom - 100mm
evaporating dish - porcelain - 5 Pcs
100mm - high heat resistant
upto 10000C
207
208
209
210
211
212
213
214
215
216
217
218
219
220
evaporating dish - porcelain 125mm- high heat resistant
upto 10000C
evaporating dish - porcelain 150mm- high heat resistant
upto 10000C
crucibles - Glassed porcelain
- high form - 30mm Dia,
15ml, max. Temperature
11500C,with lid 30mm
crucibles - Glassed porcelain
- high form - 35mm Dia,
24ml, max. Temperature
11500C,with lid 35mm
crucibles - Glassed porcelain
- high form - 40mm Dia,
40ml, max. Temperature
11500C,with lid 40mm (
crucibles - Glassed porcelain
- low form - 45mm Dia,
25ml, max. Temperature
11500C,with lid 45mm
crucibles - Glassed porcelain
- low form - 50mm Dia,
29ml, max. Temperature
11500C,with lid 50mm
crucibles - Glassed porcelain
- medium form - 35mm Dia,
13ml, , max. Temperature
11500C with lid 35mm
crucibles - Glassed porcelain
- medium form - 40mm Dia,
20ml, max. Temperature
11500C,with lid 40mm
crucibles - Glassed porcelain
- medium form - 45mm Dia,
38ml, max. Temperature
11500C,with lid 45mm
crucibles - Glassed porcelain
- medium form - 50mm Dia,
49ml, max. Temperature
11500C,with lid 50 mm
desiccator - glass - 250mmnon vacuum - borosilicate
glass
desiccator - glass - 300mmnon vacuum - borosilicate
glass
desiccator - glass - vacuum 250mm- borosilicate glass
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
1 Pc
1 Pc
1 Pc
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
filter flask - glass nozzle 100ml - borosilicate glass heat & chemical resistant
filter flask - glass nozzle 250ml- borosilicate glass heat & chemical resistant
filter flask - glass nozzle 500ml - borosilicate glass heat & chemical resistant
rubber adapters - for filter
flask - 100ml
rubber adapters - for filter
flask - 250ml&500ml
rubber adapters - for filter
flask - 1000ml
rubber adapters - for filter
flask - 2000ml
funnel - general use - 40 mm
- borosilicate glass - resistant
to heat
funnel - general use - 60
mm- borosilicate glass resistant to heat
funnel - general use - 80
mm- borosilicate glass resistant to heat
funnel - general use - 100
mm- borosilicate glass resistant to heat
funnel - general use - 120
mm- borosilicate glass resistant to heat
funnel - general use - 150
mm- borosilicate glass resistant to heat
funnel - general use - P.P. 40 mm - autoclavable
funnel - general use - P.P. 50 mm - autoclavable
funnel - general use - P.P. 75 mm- autoclavable
funnel - general use - P.P. 100 mm- autoclavable
funnel - general use - P.P. 120 mm- autoclavable
funnel - general use - P.P. 150 mm- autoclavable
analytical funnel - glass 80mm
5 Pcs
5 Pcs
5 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
5 Pcs
5 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
funnel - Buchner - porcelain
- 70 mm
funnel - Buchner - porcelain
- 110 mm
funnel - Buchner - P.P - 70
mm
funnel - Buchner - P.P - 110
mm
funnel holder - steel - 40 mm
- with boss head
funnel holder - steel - boss
head - 60 mm
funnel holder - steel - boss
head - 80 mm
funnel holder - steel - boss
head - 100 mm
funnel holder - P.P. - 170 mm
separating funnel holder P.P. - 170 mm
filter funnel - sintered glass
discs - 50 ml - 3D - por 3
filter funnel - sintered glass
discs - 50 ml - 3D - por 4
filter funnel - sintered glass
discs - 80 ml - 11 D - por 3
filter funnel - sintered glass
discs - 80 ml - 11 D - por 4
filter funnel - sintered glass
discs - 125 ml - 17 D - por 3
filter funnel - sintered glass
discs - 125 ml - 17 D - por 4
filter funnel - sintered glass
discs - 500 ml - 25 D - por 3
filter funnel - sintered glass
discs - 500 ml - 25 D - por 4
clamp - 2 jaws - 50 mm - not
included boss head - need to
order separately - total length
250mm
clamp - 3 jaws - large - 70
mm - not included boss head
- need to order separately total length 270mm
clamp - 2 jaws - swivel - 50
mm - with boss head - total
length 200mm
clamp - 3 jaws - large swivel - 70 mm - with boss
head - total length 200mm
2 PCs
2 Pcs
3 Pcs
3 Pcs
3 Pcs
3 Pcs
3 Pcs
3 Pcs
3 Pcs
3 Pcs
2 Pcs
2 Pcs
1 Pc
1 Pc
1 Pc
1 Pc
1 Pc
1 Pc
2 Pcs
2 Pcs
2 Pcs
2 Pcs
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
boss head - standard - 10 mm
- total length of 10 mm with
15 mm screw opening
possibility
boss head - swivel - 17 mm total length of 17 mm with
15 mm screw opening
possibility
boss head - heavy duty
boss head - for frames
spatula - macro - flat spoon stainless steel - 180 mm one end flat & one end spoon
spatula - round grooved stainless steel - 180 mm
spatula - micro - stainless
steel - 180 mm - one flat end
and one end angled
spatula - poly - 180 mm
spatula - chattaway stainless steel - 180 mm one flat end and one end
angled
spatula - flat knive - 150 mm
forceps - blunt - stainless
steel - 130 mm
forceps - general use blunt/straight - 200 mm
forceps - cover glass - 105
mm, "Cover glass" forcepts
is manufactured from
stainless steel.
forceps - filter paper - 130
mm, "Filter paper" forcepts
is manufactured from
stainless steel.
forceps - dissecting sharp/straight - 130 mm
forceps - dissecting sharp/straight - 150 mm
forceps - dissecting sharp/curved - 130 mm
laboratory stands rectangular - 130x200 mm rod height 750 mm
laboratory stands rectangular - 150x300 mm rod height 750 mm
laboratory stands -
2 Pcs
2 Pcs
2 Pcs
2 Pcs
25 Pcs
24 Pcs
24 Pcs
24 Pcs
12 Pcs
12 Pcs
12 Pcs
12 Pcs
12 Pcs
6Pcs
6 Pcs
3 Pcs
3 Pcs
2 Pcs
2 Pcs
2 Pcs
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
rectangular - 200x315 mm rod height 750 mm
laboratory stand - tripod base
- foot length 115 mm - rod
height 750 mm
laboratory stand - P.P 175x300 mm - Read Height
600 mm
crystallization dishes - boro
3.3 glass - 60ml
crystallization dishes - boro
3.3 glass - 100ml
crystallization dishes -boro
3.3 glass - 150ml
crystallization dishes - boro
3.3 glass - 300ml
crystallization dishes - boro
3.3 glass - 900ml
bunsen burner - standard suitable for all gas types
tripod stand - fixed height top diameter 150mm 200mm height
laboratory jack - 200x200
mm
laboratory jack - 150x150
mm
wire gauzes - ceramic center
diameter 150mm 160x160mm
ceramic triangle - 50 mm
ceramic triangle - 60 mm
stopper - rubber - 11x16x25
mm
stopper - rubber - 14x20x30
mm
stopper - rubber - 18x24x30
mm
stopper - rubber - 21x28x35
mm
stopper - rubber - 26x34x40
mm
tubing - rubber - 6mm inner
dia. x 12 mm outer dia.,1
Meter
tubing - rubber - 8x14 mm,1
Meter
tubing - rubber - 6x16 mm,1
Mete
6 Pcs
3 Pcs
3 Pcs
3 Pcs
3 Pcs
1 Pc
1 Pc
12 Pcs
6 Pcs
2 Pcs
2 Pcs
24 Pcs
6 Pcs
6 Pcs
24 Pcs
24 Pcs
24 Pcs
24 Pcs
24 Pcs
6 pcs
6 Pcs
6 Pcs
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
tubing clamp - click lock - up
to 15 mm hose diameter
tubing clamp - click lock - up
to 20 mm hose diameter
stopwatch - mechanical - 30
min - Winding - 2-scale
timer - mechanical - 60 min resolution 1min - ring signals
at the end of cycle
timer - mechanical - with
clips - 60 min.
timer - electronic - 19 hour
/59 min
magnetic bar - 20x6 mm encapsulated with a high
grade pure PTFE
magnetic bar - 30x6 mm encapsulated with a high
grade pure PTFE
magnetic bar - 40x7 mm encapsulated with a high
grade pure PTFE
magnetic bar - 50x7 mm encapsulated with a high
grade pure PTFE
magnetic bar retriever - 350
mm long
stirring rod - glass - 250x6
mm
parafilm - 50 mm x 75 m resistant to salt solutions,
inorganic acids & alkaline
solutions
parafilm - 100 mm x 38 m resistant to salt solutions,
inorganic acids & alkaline
solutions
parafilm dispenser - comes
with the cutting blade & roll
reservoir for protection of
parafilm from dust
thermometer - enclosed scale
- -10/ +110 - double walled subdivision 10C
thermometer - enclosed scale
- -10/ +200 - double walled subdivision 10C
thermometer - enclosed scale
- -10/ +300 - double walled -
6 Pcs
6 Pcs
2 Pcs
6 Pcs
6 Pcs
6 Pcs
24 Pcs
24 Pcs
12 Pcs
6 Pcs
3 Pcs
12 Pcs
10 Pcs
10 Pcs
6 Pcs
6 Pcs
12 Pcs
6 Pcs
323
324
325
326
327
328
329
330
331
332
subdivision 20C
thermometer - enclosed scale
- -10/ +420 - double walled subdivision 20C
thermometer - solid stem - 20/ +110 - Solid Stem - red
colour liquid - subdivision
0.50C
thermometer - solid stem - 10/ +200 - Solid Stem - red
colour liquid - subdivision
10C
thermometer - max.-min. - 30/ +50 - push button for
automatic resetting polypropylene housing with
inclined shelter - subdivision
10C
thermometer - indooroutdoor - -30/ +50 - Indoor /
Outdoor - can measure both
in C and F - subdivision 10C
thermometer - insertion - 50/ +300 - Insertion - ideal
for single temperature
measurements in liquids LCD display - subdivision
0.10C
thermometer - electronic - 20/ +50 - supplied with two
probes enables
indoor/outdoor measurement
- LCD display - subdivision
0.10C
thermo hygrometer - -50/
+70 - maximum/minimum
value monitoring with time
alarm function - LCD display
- subdivision 0.10C measuring range is between
10% to 99% with
subdivisions of 1% moisture
thermometer clamp & holder
- 30 mm long
bottle - screw cap borosilicate glass - clear 100 ml - angled shoulder for
liquid flow & pouring ring
for droplet transfer - highly
resistant to heat and
6 Pcs
6 Pcs
6 Pcs
6 Pcs
3 Pcs
3 Pcs
3 Pcs
3 Pcs
24 Pcs
12 Pcs
333
334
335
336
337
338
339
340
341
chemicals
bottle - screw cap borosilicate glass - clear 250 ml - angled shoulder for
liquid flow & pouring ring
for droplet transfer - highly
resistant to heat and
chemicals
bottle - screw cap borosilicate glass - clear 500 ml - angled shoulder for
liquid flow & pouring ring
for droplet transfer - highly
resistant to heat and
chemicals
bottle - screw cap borosilicate glass - clear 1000 ml - angled shoulder
for liquid flow & pouring
ring for droplet transfer highly resistant to heat and
chemicals
bottle - screw cap - P.E - 100
ml - angled shoulder for
liquid flow & pouring ring
for droplet transfer - highly
resistant to chemicals
bottle - screw cap - clear 250 ml - P.E - angled
shoulder for liquid flow &
pouring ring for droplet
transfer - highly resistant to
chemicals
bottle - screw cap - clear 500 ml - P.E - angled
shoulder for liquid flow &
pouring ring for droplet
transfer - highly resistant to
chemicals
bottle - screw cap - clear 1000 ml - P.E - angled
shoulder for liquid flow &
pouring ring for droplet
transfer - highly resistant to
chemicals
bottle - rectangular - wide
neck - clear - 50 ml - P.E highly resistant to chemicals
bottle - rectangular - wide
neck - clear - 100 ml - P.E -
12 Pcs
6 Pcs
3 Pcs
3 Pcs
3 Pcs
3 Pcs
3 Pcs
24 Pcs
24 Pcs
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
highly resistant to chemicals
bottle - rectangular - wide
neck - clear - 250 ml - P.E highly resistant to chemicals
bottle - rectangular - wide
neck - clear - 500 ml - P.E highly resistant to chemicals
bottle - rectangular - wide
neck - clear - 1000 ml - P.E highly resistant to chemicals
dropping bottle - flat head borosilicate glass - clear 100 ml - highly resistant to
heat and chemicals
dropping bottle - tip head clear - P.E. - 100 ml - highly
resistant to Chemicals
wash bottle - standard - 100
ml - narrow neck - P.E - easy
to press, semi rigid,
translucent and have
excellent clarity
wash bottle - standard - 250
ml - narrow neck - P.E - easy
to press, semi rigid,
translucent and have
excellent clarity
wash bottle - standard - 500
ml - narrow neck - P.E - easy
to press, semi rigid,
translucent and have
excellent clarity
wash bottle - standard - 1000
ml - narrow neck - P.E - easy
to press, semi rigid,
translucent and have
excellent clarity
ground joints - socket - NS
10/19 - 120 mm
ground joints - socket - NS
24/29 - 120mm
ground joints - socket - NS
29/32 - 120mm
ground joints - cone - NS
24/29 - 120mm
ground joints - cone - NS
29/32 - 120mm
clips for NS joints - NS
24/29 - green
24 Pcs
12 Pcs
6 Pcs
24 Pcs
6 Pcs
6 Pcs
6 Pcs
25 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
25 Pcs
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
clips for NS joints - NS
29/32 - red
clips for spherical joints KS
29
adapter - expansion - NS
24/29 - NS 19/26 - Socket
NS size is larger than cone
NS size
adapter - expansion - NS
29/32 - NS 14/23 - Socket
NS size is larger than cone
NS size
adapter - reduction - NS
24/29 - NS 45/40 - Socket
NS size is larger than cone
NS size
adapter - reduction - NS
29/32 - NS 34/35 - Socket
NS size is larger than cone
NS size
connectors - straight threaded tube - NS 14/23 Borosilicate glass 3.3 - GL14
connectors - threaded tube straight - glass - NS 29/32 Borosilicate glass 3.3 - GL
14
connectors - threaded tube straight - glass - NS 29/32 Borosilicate glass 3.3 - GL
25
adapters - for thermometer straight - diameter 6-8mm NS 29/32 - Borosilicate glass
3.3 - GL 14
adapters - for tubing - bent without stopcock - NS 29/32
- Borosilicate glass 3.3
adapters - delivery - for
distillation - bent - NS 29/32
- 65mm - Borosilicate glass
3.3
chromatography column without support - 15 ml
volume
chromatography column without support - 25 ml
volume
chromatography column -
25 Pcs
25 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
5 Pcs
5 Pcs
5 Pcs
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
without support - 35 ml
volume
chromatography column with support - 15 ml volume
chromatography column with support - 25 ml volume
chromatography column with support - 35 ml volume
gas washing bottle head 125 ml
gas washing bottle head 250 ml
gas washing bottle head 500 ml
gas washing bottle - 125 ml
gas washing bottle - 250 ml
gas washing bottle - 500 ml
cleaning brush - burette and
tubings - 20x120 mm
cleaning brush - large size
bottle - 70x150 mm
cleaning brush - small size
bottle - 40x100 mm
laboratory brushes for test
tubes
laboratory brushes for
narrow test tubes
cleaning brush - swivel head
- length 330mm
Staining Jar - Glass Suitable for holding 76x26
mm slides horizontally supplied with glass lid
staining jar - macro - glass suitable for holding 76x26
mm slides vertically - need
supplied with the rack - need
to order separately
staining rack for Staining jar
- suitable for holding 76x26
mm slides vertically
Microscope cover glasses 18x18 mm,
Microscope cover glasses 22x22 mm
Microscope cover glasses 24x50 mm
blood counting chamber neubauer improved - optical
5 Pcs
5 Pcs
5 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
10 Pcs
25 Pcs
25 Pcs
25 Pcs
25 Pcs
25 Pcs
6 Pcs
6 Pcs
6 Pcs
3 Pcs
24 Pcs
24 Pcs
24 Pcs
2 Pcs
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
glass
haemacyto meter cover
glasses - 24x24 mm borosilicate glass
microscope slides - cut edges
- plain
Microscope slides - cut edges
- frosted one side
Microscope slides - ground
edges
Microscope slides - ground
edges - frosted two sides
slide wallet - for 20 slides heat resistant injection
molded plastic - can hold up
to 20 standard microscope
slides of 75x25 mm
slide boxes - 50 slides - high
density polystyrene
slide boxes - 100 slides high density polystyrene
slide magazine - 200 slides includes slide box &
removable tray
slide dispenser - for 50 slides
- provided with transparent
removable upper part
slide mailer - 5 slides - high
density polypropylene - can
hold five standard 75x25 mm
slides
test tube - neutral glass 10x75 mm
test tube - neutral glass 12x100 mm
test tube - neutral glass 13x100 mm
test tube - neutral glass 16x100 mm
test tube - neutral glass 16x160 mm
test tube - neutral glass 18x180 mm
411
test tube - boro 3.3 - 16 x 100
mm - heat & chemical resistant
412
test tube - boro 3.3 - 16 x
160 mm - heat & chemical
resistant
test tube - boro 3.3 - 18 x
413
24 Pcs
24 Pcs
24 Pcs
24 Pcs
24 Pcs
6 Pcs
3 Pcs
2 Pcs
2 Pcs
4 Pcs
6 Pcs
1000
Pcs
1000
Pcs
1000
Pcs
1000
Pcs
1000
Pcs
1000
Pcs
1000
Pcs
1000
Pcs
1000
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
180 mm - heat & chemical
resistant
test tube - screw cap - 16 x
160 mm - heat & chemical
resistant
centrifuge tube - conical
bottom - glass - non
graduated - heat & chemical
resistant
centrifuge tube - conical
bottom - glass - graduated heat & chemical resistant
centrifuge tube - screw cap P.P.- non skirted - non
sterilized - 15 ml
centrifuge tube - screw cap P.P.- non skirted - sterilized 15 ml
centrifuge tube - screw cap P.P.- non skirted - non
sterilized - 50 ml
centrifuge tube - screw cap P.P.- non skirted - sterilized 50 ml
micro centrifuge tube - P.P. 0,5 ml - RNAse, DNAse and
PCR inhibitors free
micro centrifuge tube - P.P. 1,5 ml - RNAse, DNAse and
PCR inhibitors free
micro centrifuge tube - P.P. 2,0 ml - RNAse, DNAse and
PCR inhibitors free
test tube rack - P.P. - dia. 16
mm - 60-hole - autoclavable
test tube rack- P.P. - dia. 20
mm - 40-hole - autoclavable
test tube rack- steel - dia. 16
mm - 50-hole
test tube rack- steel - dia. 18
mm - 50-hole
micro centrifuge tube rack reversible - could hold 96 x
1.5/2 0.1ml micro centrifuge
tubes in one side or 96 x
0.5ml micro centrifuge tubes
on other side - tube positions
are numbered for easy
identification - provided with
Pcs
1000
Pcs
1000
Pcs
500
Pcs
1000
Pcs
1000
Pcs
1000
Pcs
1000
Pcs
1000
Pcs
1000
Pcs
1000
Pcs
100
Pcs
100
Pcs
25 Pcs
25 Pcs
6 Pcs
429
430
431
432
433
434
435
436
437
438
439
440
441
442
clear polypropylene lid autoclavable
micro centrifuge tube storage
box - capacity 100 x 1.5/2 ml
vials - polypropylene
autoclavable - provided with
transparent cover
test tube stopper - P.P. flange type - for tubes 15/16
mm
test tube clamp - wooden 25 mm - length 180 mm hold test tubes upto 25 mm
diameter
test tube clamp - metal - 30
mm - length 150 mm - hold
test tubes upto 30 mm
diameter
petri dishes - glass - 60x15
mm - heat & chemical
resistance - fire polished
edges
petri dishes - glass - 80x15
mm - heat & chemical
resistance - fire polished
edges
petri dishes - glass - 100x20
mm - heat & chemical
resistance - fire polished
petri dishes - glass - 120x20
mm - heat & chemical
resistance - fire polished
edges
petri dishes - glass - 150x25
mm - heat & chemical
resistance - fire polished
edges
petri dish stand - capacity 56
x 60mm petri dishes
petri dish stand - capacity 60
x 90mm petri dishes
liquid reservoir with spout graduated 5ml,10m & 25mlsuitable for multichannel
pipettes - volume 55ml sterile
micropipette stand - 6 station
- without storage
digital burette - -
6 Pcs
100
Pcs
24 Pcs
24 Pcs
24 Pcs
24 Pcs
100
Pcs
100
Pcs
100Pc
s
12 Pcs
12 Pcs
6 Pcs
6 Pcs
1 Pcs
443
444
445
446
447
448
449
450
451
Autoclavable at 1210C supplied with individual
calibration certificate
Bottles with Side Arm is
manufactured from clear
borosilicate glass autoclavable -1000ml
Bottles with Side Arm is
manufactured from clear
borosilicate glass autoclavable -2000ml
bottle top dispensers Isopenser - 5.0-60.0 ml meets ISO 8655 individually calibrated chemical resistant
bottle top dispensers Isopenser - 10.0-100.0 ml meets ISO 8655 individually calibrated chemical resistant
dispensers - zipette - 1.0-50.0
ml - individually calibrated autoclavable in 1210C chemical resistant
pipette pump - electrical fixed nozzle
pipette pump - electrical adjustable nozzle
Pipette Filler for all types of
pipettes. Filler has ball
valves which can be
controlled by finger
pressure- 100ml
Pipette filler controllable
pipette filler, which is
designed to give superior
pipetting control from 1100ml
Grand Total
6 Pcs
6 Pcs
3 Pcs
2 Pcs
1 Pc
2 Pcs
2 Pcs
15 Pcs
10 Pcs
(Please submit separate forms for any alternate models proposed)
VAT registration number ……………………………………………………………… (if
applicable)
Total amount in words; Sri Lankan Rupees
…………………………………………………………………
………………………………………………………………………………………………
…….
Signature of the Bidder ………………………
………………………………………….
( Common Seal of the Company)
Name & address of the Company …………………………………….…………….……
………………………………………………………..
…….…………….……………………………………
……………….…………….………..........................
Name address of the Authorized Officers: ………………………………………….……
……….………….……………………………
……………………….…………….…….……
Telephone Number - ……………………….
Fax Number ……………………………………
Date …………/ ..…/ 2011
Annexure B: Price Schedule Form
B-4 : Price Schedule for Supply of Laboratory Furniture
No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Laboratory
Furnitures
Equipment Cart:
Glass ware Cart
Chemical Cart:
Laboratory
Security Cart:
Mobile
Laboratory Work
Tab le
Portable
Desiccator cabinet
Sink cabinet
assemblies
Standing Height
wall assemblies
with fume hood
Standing Height
wall assemblies
with sink
Upper wall cabinet
Slide Storage
System.
Laboratory Stool
Laboratory Tables
Storage Cabinet
Center table
Grand Total
Req.
No
Rate per
Unit
(SLR. or
INR. as
applicabl
e,
Without
Custom
duty and
taxes)
Custom
duty,
Sales Tax
or other
taxes
(SLR. or
INR. as
applicabl
e)
Total
amount
with
Custom
duty and
taxes (SLR.
or INR. as
applicable)
Total
amount
without
Custom
duty and
taxes (SLR.
or INR. as
applicable)
2
1
1
1
1
1
1
1
1
3
3
12
6
2
1
(Please submit separate forms for any alternate models proposed)
VAT registration number ……………………………………………………………… (if
applicable)
Total amount in words; Sri Lankan Rupees
…………………………………………………………………
………………………………………………………………………………………………
…….
Signature of the Bidder ………………………
………………………………………….
( Common Seal of the Company)
Name & address of the Company …………………………………….…………….……
………………………………………………………..
…….…………….……………………………………
……………….…………….………..........................
Name address of the Authorized Officers: ………………………………………….……
……….………….……………………………
……………………….…………….…….……
Telephone Number - ……………………….
Fax Number ……………………………………
Date …………/ ..…/ 2011
Annexure B: Price Schedule Form
B-5 : Price Schedule for Supply of Vehicle
No
1
Vehicle
DOUBLE CAB
- 4WD
(Country of
Origin-India)
Grade Total
Req. No
Rate per
Unit (SLR.
or INR. as
applicable,
Without
Custom
duty and
taxes)
Custom
duty, Sales
Tax or
other
taxes
(SLR. or
INR. as
applicable)
Total
amount
with
Custom
duty and
taxes (SLR.
or INR. as
applicable)
Total
amount
without
Custom
duty and
taxes (SLR.
or INR. as
applicable)
4
(Please submit separate forms for any alternate models proposed)
VAT registration number ……………………………………………………………… (if
applicable)
Total amount in words; Sri Lankan Rupees
…………………………………………………………………
………………………………………………………………………………………………
…….
Signature of the Bidder ………………………
………………………………………….
( Common Seal of the Company)
Name & address of the Company …………………………………….…………….……
………………………………………………………..
…….…………….……………………………………
……………….…………….………..........................
Name address of the Authorized Officers: ………………………………………….……
……….………….……………………………
……………………….…………….…….……
Telephone Number - ……………………….
Fax Number ……………………………………
Date …………/ ..…/ 2011
Annexure C: Manufacturer’s Authorization
[The Bidder shall require the Manufacturer to fill in this Form in accordance with the
instructions indicated. This letter of authorization should be on the letterhead of the
Manufacturer and should be signed by a person with the proper authority to sign
documents that are binding on the Manufacturer. The Bidder shall include it in its bid, if
so indicated in the BDS.]
Date: ……………………………………..
No.: ……………………………………….
To: ………………………………………………..
WHEREAS
We……………………………………………, who are official manufacturers of
……………………………………….., having factories at [insert full address of
Manufacturer’s factories], do hereby authorize ……………………………… to submit a
bid the purpose of which is to provide the following Goods, manufactured by us
……………………………………………, and to subsequently negotiate and sign the
Contract.
We hereby extend our full guarantee and warranty as mentioned in the
specification/general terms and condition, with respect to the Goods offered by the above
firm.
Signed: …………………………………………………………..
Name: ……………………………………………………………………………….
Title: ………………………………………………………………………
Duly authorized to sign this Authorization on behalf of: …………………………………….
Dated on ____________ day of __________________, _______ .
Annexure D
BID BOND FORM
Whereas …………………………………………………………………………Hereinafter called "The
TENDERER'' has submitted his/their Tender dated ………………………. For the “supply and
Installation of Laboratory Equipment to Palmyrah Development Board”, as per specification schedule
annexed. Know all men by these presents that we ………………………………….. .. . . .. . . . . . . . . . . .
. . . . . . .. . . .. . . . . . . . . . ………….. (Here in after called the Bank) are bound to the
________________________________
__________________________________________. (Here in after called THE PURCHASER) in the
sum of ......... …………for which payment well and truly to be made to the said PURCHASER The
bank binds itself, its successors and assigns by these presents sealed with the common seal of the said
bank this Day of 2011.
The conditions of the obligation are:- .
1.
If the TENDERER withdraws his bid during the period of bid validity specified by the
TENDERER on the bid form or
2.
If the TENDERER having being notified of the acceptance of his bid by the PURCHASER'
during the period of Bid validity
Fails or refuses to execute the CONTRACT.
a.
Or
b.
Fails or refuses to furnish the performance bond. We undertake to pay to the PURCHASER up
to the above amount upon receipt of his first written demand, without the PURCHASER having
to substantiate his demand PURCHASER will state that the amount claimed by him is due to
him owing to the occurrence of one or both conditions, specifying the occurred condition or
conditions.
This guarantee will remain in Force up- to and including 120 days after the period at BID
validity, and any demand in respect thereof should reach the BANK not later than the above
date.
……………………………….
Signature of the Bank
Annexure E
PERFORMANCE BOND FORM
“Supply and Installation of Laboratory Equipment to Palmyrah Development
Board "
Whereas hereinafter Called "The SUPPLIER" has undertaken, in pursuance of CONTRACT dated 2011 to supply and
installation of Laboratory Equipment to Palmyrah Development Board.
Hereinafter called "The CONTRACT" and where as it has been by you in the said CONTRACT that the SUPPLIER shall
furnish you with a “Bank. Guarantee” by a recognized Bank for the sum specified herein as security for compliance with the
SUPPLIER's performance obligation in accordance with the CONTRACT and whereas we agreed to give the SUPPLIER a
Guarantee.
Thereof we hereby affirm that we are guarantors and responsible to you on behalf of SUPPLIER, up to a total of and we
undertake to pay you upon, your first written demand declaring the SUPPLIER to be in default under the CONTRACT and
without cavil or argument any sum or sums within the limits of .................................. as aforesaid, without your needing to
prove or to show grounds or reasons for your demand or the sum specified therein. This guarantee is valid until the
......................................... day of 2011..
……………………………………..
Signature and the Seal of the Bank
............................................................................... We understand that you are not bound to accept the lowest or any tender
you may receive Dated this …………………………...…………day of ………………………………………… Two
Thousand and Eleven.
Signature …………………………..
……………………………………………………………………………in the capacity of ……………………… duly
authorized to sign tenders for and on behalf of ……………………………………………………………………………
…………………………………………………………………………………………………………………………………
……………………………………………………………………(Name and Address of the company)
(IN BLOCK CAPITAL LETTERS)
Name : _______________________________________
_______________________________________
_______________________________________
WITNESSES
..............................................................................
Address:
..............................................................................
Signature:
..............................................................................
Name
..............................................................................
Address:
...............................................................................
Signature:
Download PDF
Similar pages