front cover photo: zachstovall.com
THE COOLER YOU’VE
ALWAYS
WANTED
THE LAST YOU’LL
EVER NEED
TM
How many coolers have you owned? The higher the
number, the more you’ll appreciate a YETI® Cooler. Our
coolers are rotational-molded, using the same materials
and process used to make whitewater kayaks. This process
is more costly, but the result is an ice chest with a dramatic
durability advantage. And a YETI® Cooler keeps ice longer
— a lot longer — with over twice the insulation compared
to most ordinary coolers. YETI® Coolers are the ultimate in
design, performance and durability.
WILDLY
STRONGER!
YETI® Coolers are built to take the rugged
abuse that comes with the way we work
and play.
Unlike ordinary coolers, which are essentially
disposable, YETI® Coolers are made to last! Broken
handles, busted hinges, failed latches, caved-in lids,
cracked corners... sound familiar? If you’re like most,
you’ve experienced all of these with the coolers you’ve
owned. Even the most expensive ordinary coolers
can’t take the punishment dished out by the average
outdoorsman. That’s why we make YETI® Coolers.
Rotational-molded construction makes
YETI® Coolers virtually indestructible.
Roto-molding, the same process used to make
whitewater kayaks, ensures impact resistance and
long-term durability. Ordinary coolers are
glued together and the seams separate
over time. Both the lid and body of a
YETI® Cooler are built with seamless,
one-piece construction.
YETI® Coolers are certified
bear-proof by the Interagency
Grizzly Bear Committee.
YETI® Coolers meet the USDA’s
Interagency Grizzly Bear Comittee (IGBC)
standards for bear-resistant containers. They
have been thoroughly tested in both controlled bear
simulations and with wild grizzly bears. With locks in
the integrated padlock ports of a YETI® Cooler,
grizzlies get nothing but frustrated.
T-Rex™ Lid Latches
The heavy-duty rubber T-latches, with
patent-pending technology and
molded-in keepers, keep your
lid securely closed and are
built to last.
BearFoot™ Non-Slip Feet
Non-marking rubber feet help keep your
cooler where you put it. They prevent
sliding and keep your YETI® Cooler
up off the deck for easy rinsing.
Sliding feet also available
(see Accessories).
Features as tough as YETI® Coolers themselves
NeverFail™ Hinge System
AnchorPoint™ Tie-Down Slots
NeverFail™ Hinge System
YETI’s full-length integrated hinge system will not fail.
A full-length, rust-proof aluminum rod connects and
holds the body and lid together. Plus, hinge-stops are
molded into the lid, so the hinge can’t break.
AnchorPoint™ Tie-Down Slots
T-Rex™ Lid Latches
LipGrip™ Handles
Tie-down slots are molded into the cooler body for
solid mounting. They’re perfect for securing your
YETI® Cooler to a boat, truck bed, trailer or barbecue
rig. Compatible Tie-Down Kits available
(see Accessories).
DoubleHaul™ Handles
LipGrip™ Handles
The integrated, recessed handles on a YETI® Cooler
make solo carrying easier. Plus, they save valuable
space and won’t get in the way.
Vortex™ Drain System
“A very well designed
product. YETIs are built like a tank!”
- Jim Dungan, Houston, TX
BearFoot™ Non-Slip Feet
Vortex™ Drain System
YETI® Cooler’s screw-in gasketed drain
plug is leak-proof and rugged. It’s designed
to drain when partially open without
having to fully remove the plug. The
cooler floor is channeled and recessed
for easy draining.
DoubleHaul™ Handles
You can’t break the handles on a YETI® Cooler.
They have a textured grip and are secured
with marine-grade rope. There is no slippery
plastic to hold on to while transferring to a
boat or a truck. Attachment points are
integrated into the cooler body and keep
handles out of the way when not in use.
KEEP ICE LONGER!
Keeping things cold is what a cooler is all about.
With thicker walls, more than twice the insulation
and a full-frame gasket, YETI® Coolers
out-perform the competition it’s not even close!
Thicker walls mean more cold-containing
insulation.
The FatWall™ design of the YETI® Tundra® Cooler
puts two inches of premium PermaFrost™
insulation in the walls for maximum ice
retention. You’ll typically find just a 1/2 inch
of insulation in ordinary coolers and maybe
an inch in the more expensive models. The
bottom line is that insulation thickness
correlates to ice retention, and YETI® Coolers
are second to none!
YETI® Coolers don’t just
close, they seal!
Unlike ordinary coolers, YETI®
Coolers feature the ColdLock™
full-frame, freezer-quality
gasket that seals around the
entire lid to minimize air
exchange. This seal, combined
with our InterLock™ lid system,
assures maximum, long-term
ice retention.
“Over three days in the blistering
summer heat and it still had ice in it!
What a quality product!”
- Don Kisky, Whitetail Freaks
“Held ice for 6 days in
the Texas heat. Imagine what
it would do in New York City.”
– Hoke Bullock, Marathon, TX
YETI® Tundra® Cooler Cross Section
FatWall™ Design
All YETI® Coolers feature extra-thick walls designed to house added insulation
for maximum ice retention.
InterLock™ Lid System
PermaFrost™ Insulation
YETI’s PermaFrost™ insulation is pressure-injected, giving you exceptional
thermal resistance for unmatched ice retention.
ColdLock™ Gasket
The YETI® ColdLock™ gasket minimizes unwanted air exchange, locking out
heat while sealing in cold.
FatWall™ Design
ColdLock™ Gasket
InterLock™ Lid System
A YETI® Cooler lid doesn’t just rest on top of the cooler body - it interlocks.
This creates an essential form-fitting barrier between your contents and the
outside elements.
PermaFrost™ Insulation
BearFoot™ Non-Slip Feet
Non-marking rubber feet keep your YETI® Cooler up off hot surfaces such as
concrete or asphalt, minimizing heat transfer.
Sliding feet also available (see Accessories).
“Kept ice for 5 days
in 100-plus degree heat!”
– Arnie Chandola
Northwest Voyageurs
Tips To Maximize Ice Retention*
1. Pre-cool your YETI® Cooler – When starting with a warm cooler, a lot of ice is required to lower the
core temperature of the heavily insulated walls. Prior to loading your YETI® Cooler, store it in a cool
environment or use a sacrificial bag of ice.
2. Freeze or pre-chill contents – Prior to loading your YETI® Cooler, freezing or pre-chilling cooler
contents like meat or beverages will help your ice last longer.
3. Use quality ice – Ice can get much colder than its freezing point. Warm ice (near 32°F) is typically wet
to the touch and dripping with water. Cold, sub-zero ice is relatively dry and will last substantially longer.
4. More ice is better - We recommend filling your cooler with as much ice as possible. Ideally you want to
have an ice to contents ratio of at least 2:1.
BearFoot™ Non-Slip Feet
“Using dry ice in my
YETI allows me to stay in
the field twice as long, which
means better trips for my clients.”
– Brandon Boedecker, PRO Outfitters
5. Use dry ice – YETI® Coolers are Dry Ice CO2mpatible™ and can handle the extremely low temperature
(-109°F), whereas ordinary coolers become brittle and crack. Dry ice provides approximately 3X the
cooling power of regular ice and leaves more room for contents.
*Due to all of the known variables that affect ice retention, and because every adventure is different, we believe it is misleading to make specific
claims about how long a cooler will hold ice . Your understanding of these factors is the key to maximizing ice retention. For more information on
ice retention, please reference your YETI® Coolers Owner’s Manual. (also available online at www.yeticoolers.com/owners-manual)
BullDog™ Strap Guides
NeverFail™ Hinge System
T-Rex™ Lid Latches
BearFoot™ Non-Slip Feet
ColdLock™ Gasket
PermaFrost™ Insulation
TUNDRA® COOLER
FatWall™ Design
BearFoot™ Non-Slip Feet
BullDog™ Strap Guides
An extreme example of how durable
and insulated a cooler can be
• One-piece, roto-molded construction is extremely durable just like a
whitewater kayak
AnchorPoint™ Tie-Down Slots
YT35
YT45
YT50
• YETI’s PermaFrost™ Insulation is pressure-injected, giving you
exceptional thermal resistance for unmatched ice retention
• T-Rex™ Lid Latches, with patent-pending technology and molded-in keepers, keep your lid securely closed and are built to last
YT65
• The YETI Coolers ColdLock™ Gasket minimizes unwanted air exchange, locking out heat while sealing in cold
YT75
• NeverFail™ Hinge System includes a full-length, integrated hinge that is self-
stopping and will not break
YT105
• FatWall™ Design features extra-thick walls designed to house added insulation for maximum ice retention
LipGrip™ Handles
Vortex™
Drain System
YT75
YT110
• InterLock™ Lid System enables lid to interlock with the cooler body, creating
an essential form-fitting barrier between your contents and outside elements
YT125
• AnchorPoint™ Tie-Down Slots are molded into cooler body for solid mounting
• DoubleHaul™ Handles, with textured grips and marine-grade rope, make carrying a loaded cooler easier for two people
YT160
• Integrated LipGrip™ Handles make solo carrying easier, save valuable space, and won’t get in the way
• Vortex™ Drain System has a screw-in, gasketed drain plug that allows for easy draining while partially opened and guarantees leak-proof reliability
YT250
• BullDog™ Strap Guides allow for your cooler to be securely racheted down while being hauled or transported
• Constructed of food-grade material that is Dry Ice Compatible™ and
UV-resistant
YT420
• Integrated padlock ports make it easy to bear-proof your YETI® Cooler
DIMENSIONS
DIMENSIONS
CAPACITY
CAPACITY
Model
L"
W"
H"
Gal
Cans*
Model
L"
W"
H"
Gal
Cans*
YT35
21
16
15-1/2 7.2
20
YT110
37
17-7/8
20
24.1
65
YT45
25-1/2
16
15-1/2 9.4
26
YT125
40
19-1/2
20
30.3
81
YT50
24
17-3/8
18
11.8
32
YT160
45
19-1/2
21-3/8 37.5
100
YT65
30-1/2
17-3/8
16
14.3
39
YT250
55 22
21-1/4 58.1
155
YT75
33-1/4
17-7/8
18
18.7
50
YT420 63-5/8 27-1/4 100.6
268
YT105
30-1/2 19-1/2
20
21.8
59
24-1/2
*Using the recommended 2:1 ratio of ice to contents
AVAILABLE ACCESSORIES
DoubleHaul™ Handles
TUNDRA® COOLER
• BearFoot™ Non-Slip Feet, are made from non-marking rubber and help keep your cooler where you put it and up off of hot surfaces
It’s so big - it won’t fit on the page! For more information
on this monster cooler, please visit yeticoolers.com
SECURITY CABLE LOCK & BRACKET
TIE-DOWN KIT
SEAT CUSHION
SEADEK®
CORNER CHOCK SET
BEAR PROOF LOCK
DRAIN PLUG HOSE CONNECTION
SLIDING FEET
YETI BOTTLE OPENER
FISHING ROD HOLSTER - NEW!
BEVERAGE HOLDER - NEW!
The ultimate combination of performance,
durability and portability.
• One-piece, roto-molded construction is extremely durable just like a
whitewater kayak
• YETI’s PermaFrost™ Insulation is pressure-injected, giving you
exceptional thermal resistance for unmatched ice retention
Full-length
stainless steel
handle
• T-Rex™ Lid Latches, with patent-pending technology and molded-in keepers, keep your lid securely closed and are built to last
• The YETI® ColdLock™ Gasket minimizes unwanted air exchange,
locking out heat while sealing in cold
• NeverFail™ Hinge System includes a full-length, integrated hinge that
is self-stopping and will not break
• FatWall™ Design features extra-thick walls designed to house
added insulation for maximum ice retention
• BearFoot™ Non-Slip Feet, are made from non-marking rubber and
help keep the cooler where you put it and up off of hot surfaces
• InterLock™ Lid System enables lid to interlock with the cooler body, creating an essential form-fitting barrier between your contents and outside elements
• AnchorPoint™ Tie-Down Slots are molded into cooler body for solid mounting
• Full-length stainless steel handle with textured grip that locks upright for easy carrying
T-Rex™ Lid latches
• Vortex™ Drain System has a screw-in, gasketed drain plug that allows for easy draining while partially opened and guarantees leak-proof
reliability
• BullDog™ Strap Guides allow for your cooler to be securely racheted down while being hauled or transported
• Constructed of food-grade material that is Dry Ice Compatible™ and
UV-resistant
• Integrated padlock ports make it easy to bear-proof your YETI® Cooler
BearFoot™ Non-Slip Feet
ROADIE® COOLER
BearFoot™ Non-Slip Feet
ROADIE®
COOLER
YR20
Model
YR20
DIMENSIONS
L"
W"
18-1/2
White
13-5/8
H"
14-3/8 Desert
Tan
CAPACITY
Gal
Cans*
5.2
14
Ice
Blue
*Using the recommended 2:1 ratio of ice
to contents
Corner Chock Set
Secure your YETI® Cooler with heavy-duty rubber Corner
Chocks. Rubber provides excellent, non-abrasive support and
can withstand years of wear and sun exposure. Kit includes
4 rubber Corner Chocks, 2 marine grade bungees and
stainless steel mounting hardware.
Tie Down Kit
Tie-Down Kit
SeaDek® Slip Resistant Pad
Our #1 mounting system! Secure your YETI® Cooler in a boat, truck bed, trailer,
or barbecue rig with the YETI® Tie-Down Kit. When not
in use, only the low profile deck plates remain, leaving
nothing to trip over. Kit includes two nylon straps with
stainless steel cam buckles, deck plates and mounting
hardware. All hardware is marine-grade stainless steel.
This durable, slip-resistant SeaDek®, made from 6mm EVA foam, provides
excellent traction and extreme comfort when using your YETI® Cooler as a
standing or casting platform. The higher you are off the boat deck, the further
you can see down into the water. SeaDek® attaches permanently with a pressure
sensitive adhesive backing. Custom fit for all YETI® Tundra® Cooler models up
to the Tundra® Cooler 160.
Security Cable Lock & Bracket
Seat Cushion - White
Protect your investment! The YETI Security Cable Lock & Bracket are
perfect for securing your YETI® Cooler in a truck-bed or any other area
where it’s vulnerable to opportunistic street thugs.
Your YETI® Cooler can do double duty. The YETI® Seat Cushion has at least two
inches of dense foam and is made of tough UV marine vinyl stitched with GORE®
TENARA® Sewing Thread. Screw the included studs into the cooler lid and snap
the cushion in place. All hardware is stainless steel.
Sliding Feet
Seat Cushion - Camo
Need your YETI Cooler to slide? Simply replace the
BearFoot™ Non-Slip Feet with these hard plastic
Sliding Feet. Four Sliding Feet and marine-grade
stainless steel hardware included.
®
ACCESSORIES
Perfect for the duck boat, dove field, deer camp or high-rack, these Realtree®
Advantage Max-4 HD seat cushions are made of durable vinyl and stitched with
long-lasting GORE® TENARA® Sewing Thread. Screw the included studs into
the cooler lid and snap the
cushion in place.
Meet your specific needs with accessories
made as tough as your YETI® Cooler
For the full range of YETI® accessories visit yeticoolers.com
Beverage Holder NEW
Great for river trips, camping outings, or tailgates - the YETI Beverage
Holder mounts to the side of your cooler and serves as a secure
and convenient caddy for your frosty beverage. This heavy-duty,
powder coated stainless steel version slides securely into the
AnchorPoint™ Tie-Down slot of your YETI® Tundra® Cooler, allowing
for easy access to other cooler contents.
Rod Holster NEW
Vertically mounts to the side of your YETI® Cooler for easy fishing rod
access whether paddling or boating. Heavy-duty polypropylene tube is
attached to a sturdy, stainless steel, powder coated bracket.
Slides securely into the AnchorPoint™ Tie-Down slot of your
YETI® Tundra® Cooler without getting in the way of the lid.
Drain Plug Hose Connection
This drain plug adapter allows you to drain your YETI® Cooler with a garden
hose while it remains in place. The male end of the hose connection
fits most standard hoses. When not in use, simply attach
the provided cap as a leak-proof plug.
Bear Proof Lock
Long shank Master Lock® protects your contents
and certifies your YETI® Cooler as a bear resistant
container. Also keeps friends out of your beer!
Seat Cushion
Bear Proof Lock
Rod Holster
Security Cable Lock & Bracket
SeaDek® Pad
Armored to hold the cold like no other ice bucket.
• One-piece, roto-molded construction is extremely durable just like a whitewater kayak
• YETI’s PermaFrost™ Insulation is pressure-injected, giving you exceptional thermal
resistance for unmatched ice retention
• FatWall™ Design features extra-thick walls designed to house
added insulation for maximum ice retention
• BearFoot™ Non-Slip Feet, are made from non-marking
rubber and help keep the cooler where you put it and up
off of hot surfaces
• AnchorPoint™ Tie-Down Slots are molded into cooler body
for solid mounting
DoubleHaul™ Handles
• Vortex™ Drain System has a screw-in, gasketed drain plug
that allows for easy draining while partially opened and
guarantees leak-proof reliability
• DoubleHaul™ Handles, with textured grips and marine-grade rope, make carrying a loaded YETI® Tank® easier for two people
• Constructed of food-grade material that is Dry Ice
Compatible™ and UV-resistant
• Holds one full-size keg, 96
aluminum cans, 60 longneck
bottles, and 80 pounds of ice
• Your next backyard bash,
fish fry, tailgate, barn dance or
awkward family get-together
will stay wilder, longer
Vortex™
Drain System
YETI
TANK®
TANK ® ICE BUCKET
ICE BUCKET
BearFoot™ Non-Slip Feet
YTK85B
Model
YTK85B
DIMENSIONS
L"
W"
25-1/2
19-1/2
H"
CAPACITY
Gal
Cans*
25-1/2 20.8
96
Ice
Keg
Ice
80lbs
1
Blue
*Using the recommended 2:1 ratio of ice
to contents
YETI Gear: Because wearing a
cooler on your head is ridiculous.
YETI Coolers™ Tees
Rugged yet remarkably
comfortable. Available
in a variety of styles
and colors.
YETI Coolers™ Trucker Hats
In both a Low-Profile and
Traditional Trucker style, the
dark under-brim cuts glare.
The mesh top helps keep you
cool. One size fits most.
YETI Coolers™ Visor
Classic tour style visor with
wide brim, dark underside
and large sweat band.
Best visor, period.
GEAR
YETI Coolers™
Sportsman Decals
Great way to show your
YETI® pride. Comes in a
variety of species, from
Elk to Blue Marlin. Looks
great on a boat, truck, SUV,
and anywhere else! Actual
decals are WHITE not black.
YETI® Tarpon Beverage Entry Tool
The ultimate survival tool for keeping
you hydrated in the field or on the water.
This stainless steel tool (in the shape
of a jumping tarpon) has three functions:
1) Church Key, 2) Twist Off Wrench,
and 3) Can Tab Opener. You don’t want
to leave home without it.
YETI® Koozies
Fat-foam, old-school
koozie keeps your canned
beverages colder longer.
Also available in neoprene.
YETI® Bottle Key
The YETI® Bottle Key is the ultimate
wrench for opening your frosty
beverage. Designed as a Class 2
Lever, a mechanical advantage is
achieved by applying force about
the fulcrum for easy cap removal
(Physics 101).
YETI® Bottle Opener
This retro-style YETI® Bottle Opener is perfect for
your hunting cabin, fishing camp, or man cave.
You can even mount it directly to your YETI®
Cooler! And of course, it’s stainless steel.
YETI® Guide Belt
Being lost in the wilderness without a bottle opener will
never be a problem again! 1.5” nylon webbing with forged
aluminum buckle that doubles as a bottle opener.
YETI® Buff®
YETI’s killer Caribbean Camo Buff® will
keep you cool on the water. Whether you
are headed offshore, stalking the flats,
or floating a trout stream,
the YETI® Buff® has
you covered.
“ I NEVER REALLY KNEW THERE WAS
SUCH A BIG DIFFERENCE IN THE
QUALITY
AND EFFECTIVENESS
OF A COOLER UNTIL I GOT A YETI.
MAKES ALL OTHER COOLERS SEEM
VERY TEMPORARY.”
YETI® Coolers is proud to be ranked in the Inc 500 list
of the nation’s fastest growing private companies. This
would not have been possible without such dedicated,
enthusiastic customers and a strong network of loyal
dealers. We view this as confirmation that the world needs
coolers that are wildly stronger and keep ice longer!
www.yeticoolers.com
P.O. Box 163686, Austin, TX 78716-3686
front cover photo: zachstovall.com
- Jay Gregory, The Wild Outdoors
The YETI® Coolers “Don’t Worry”
5 Year Warranty
We stand behind every cooler we make.
If any part of your YETI® Cooler malfunctions or
breaks, simply contact us for prompt repair
or replacement. Don’t worry, it’s a YETI!
PHONE 512.394.9384
FAX 512.857.9387
info@yeticoolers.com
© 2013 YETI Coolers LLC
Download PDF
Similar pages