iWD Deployment Guide - Genesys Documentation

iWD Deployment Guide
Manual Installation of IWDBPs in 8.5.104
3/22/2018
Manual Installation of IWDBPs in 8.5.104
Manual Installation of IWDBPs in 8.5.104
Manual Installation of iWDBP for IRD 8.5.104
Manual Installation of iWDBP for IRD 8.5.104
The business process for IRD is provided as a .wie file that can be imported manually through the Genesys
Interaction Routing Designer. The iWD business process .wie files are saved to your file system when the iWD
Manager Installation Package is installed.
Procedure
1. In the IRD main window, click Interaction Design.
2. Click Business Processes. The existing Business Processes are listed for selection.
3. Double-click a Business Process to open the Interaction Design window.
4. From the File menu, select Import. The Configuration Import Wizard Choose File page appears.
iWD Deployment Guide
2
Manual Installation of IWDBPs in 8.5.104
5. Next to the File text box, click Browse. The Open dialog box appears.
iWD Deployment Guide
3
Manual Installation of IWDBPs in 8.5.104
6. Locate the iwdbp.wie file, and double-click it. The Open dialog box closes. IRD inserts the selected directory path
and file name into the File text box in the Configuration Import Wizard.
7. Under Where to put strategy RBN files, do one of the following:
• Click Browse, and then locate the folder that will hold the graphical portion of strategies in the Business Process
(strategy *.rbn files, which consume more space than the script portion of strategies).
• Select the Into Database check box (if it is enabled), to save *.rbn files in a database.
Notes:
• In order for the Into Database checkbox to be enabled, a Database Access Point must appear in the Connections tab
of the IRD Application in Configuration Manager.
• The database used is the Configuration Server database. The table name is ird_strategies.
• If security is a consideration, you may want to store the .rbn files in a database. For example, if you are a Service
Provider, you might not want your subscribers to have access to your corporate drives. In this case, saving to the
database in the recommended method.
• If you want to save the details of the import operation to a log file, click Browse next to the Log text box (unless the
log file is already selected), and then locate or create the log file.
• Under Log (only if you need it), you have the option of saving business process import details in a log file. If you wish to do
this, click the Browse button and locate/name the log file.
• Click Next. The Configuration Wizard Confirm Importing page appears.
iWD Deployment Guide
4
Manual Installation of IWDBPs in 8.5.104
• If you are satisfied with your entries, click Import; otherwise, click Back to return to the Configuration Import Wizard
Choose File page, and repeat Steps 5-9.
After you click Import, the Configuration Import dialog box appears. A progress bar shows the progress of the import.
• Do one of the following:
• To update your configuration settings immediately after the update, click Refresh.
• Click Close; then at any time, you can update your configuration settings by selecting Refresh from the File menu.
• Respond to any messages that appear.
Manual Installation of iWDBP for Composer 8.5.104
Manual Installation of iWDBP for Composer 8.5.104
Import the Composer IWDBP project template (iwd_bp_comp) which is provided with the iWD software distribution
artifacts here:
• <iWD Manager Installation Directory>/config/iwd_bp_comp.
Prerequisites
Configure your Web Application Server by following the application server requirements guidelines here (new
document).
Procedure
1. Run Composer (or Eclipse with the Composer plug-in).
2. Switch to Composer Design or Composer perspective.
3. Select File > Import > General -> Existing Project into Workspace.
4. Select the iwd_bp_comp template and click Next.
5. Select the Project locale and click Finish.
6. Connect to Configuration Server.
7. Select the Tenant that will be used for the business process.
8. Publish the Composer configuration objects to Configuration Server. Do this by right-clicking on the Interaction
Processes/Main.ixnprocess script, then clicking Publish to Configuration Server.
iWD Deployment Guide
5
Manual Installation of IWDBPs in 8.5.104
9. When the project is successfully published to Configuration Server the following objects will be created under the
<selected tenant> Scripts folder on Configuration Server:
10. Composer can show warnings in Queue Interaction blocks. In these blocks select Properties->Destination>Interaction Queue Name even it is already set and save changes.
iWD Deployment Guide
6
Manual Installation of IWDBPs in 8.5.104
11. Right-click the iwd_bp_comp project and click Generate All to display the Generate All dialog.
12. Check the Deploy Project and Publish data to Configuration Server checkboxes and click Finish. This deploys the
iwd_bp_comp application to Tomcat and generates *scxml files that can be accessed via http.
13. To verify that the URL to the generated files is valid, log in to Genesys Administrator.
14. Navigate to <Used tenant> -> Provisioning -> Routing/eServices -> Orchestration ->
iwd_bp_comp.Main.Classification.Classification.
iWD Deployment Guide
7
Manual Installation of IWDBPs in 8.5.104
15. Click Check URI to verify whether the Composer-generated URL is valid.
iWD Deployment Guide
8
Download PDF
Similar pages