TRSP/TRGP -series
®
Santronic
– piezo touch activated faucet
FEATURES AND BENEFITS
Barrier free and ADA
Water and energy conserving
Contributes to LEED requirements
TR-series electronic faucet
TRGP-model
TECHNICAL INFORMATION
LEED compliance/Energy savings
Activation system
The Santronic® touch faucet is equipped with a piezo touch button. A
very light touch on the piezo touch button causes an electrical charge.
This charge combined with a latching solenoid valve and a 9V battery
allows to open and close the water flow.
Water cycle
The water will flow for 10. A different duration of the water flow can be
programmed upon request.
The Sanispray contributes to meeting LEED requirements in the following
categories:
WEp1 - Water Efficiency
WEc3 - Water Use Reduction
Each nozzle has a flow rate of 0.5 gpm. The water cycle
lasts 10 seconds which means that 0.083 gallons of water
is used per cycle (or a savings of 67% over baseline of 0.25
gallons per cycle)
Accessibility
The TRSP and TRGP faucets comply with ADA for operation if
installed properly.
On/Off function
The water flow can be stopped by touching the Piezo button before the water
flow has automatically stopped. This function allows a more accurate control of
the water flow, enabling users to stop water flow whenever water is no longer
needed.
An automatic flushing cycle can be programmed. With this option the
washfountain flushes automatically every 24 hours and this can help
prevent the growth of legionnaire’s bacteria.
Power supply
The faucet is powered with by a 9V lithium battery. The battery will last
between 144,000 and 240,000 water cycles. A warning alarm signals
when the battery is near depletion. As an alternate unit can be supplied
with a class II transformer with plug (suffix: -HW)
Models
Technical specifications
Spout
Control box
Power
Battery Life
Water pressure
Temperature
Supply
Water
Water flow
Solenoid valve
Installation
The standard model has a spout height of 5 1/8” (model#:TRSP-)
The gooseneck model has a spout height of 7 1/8” (model#: TRGP-)
Warranty
Materials
1 year (limited)
The faucet is made of chrome plated brass. The components (solenoid
valve, battery, optional mixing valve) are mounted inside a stainless
steel white powder coated box with vandal resistant lock.
Chrome plated brass
White powder coated steel
9V alkaline
± 200,000 cycles
20 psi – 90 psi
40°F to 140°F for model with TMV
½” M BSP
Tempered water or is available with
thermostatic mixing valve.
0.5 gpm
bi-stable, 2 coil
Battery and solenoid valve are mounted
inside a control box.
SAMPLE SPECIFICATION
The faucet will be a Santronic® piezo touch faucet (specify model and optional
equipment). The faucet will be activated by a touch button. The faucet is
powered by a 9V lithium battery. The spout is made of chrome plated brass.
Valve and battery are mounted in powder coated steel box with vandal
resistant lock.
INTERSAN MANUFACTURING COMPANY
1748 W. Fillmore St. – Phoenix, AZ 85007 – (800) 999-3101 – Fax: (602) 254-3101 – www.intersanUS.com
All information including dimensions, changes in design and material are subject to manufacturer’s change without formal notice and without obligation. Intersan assumes no responsibility for use of superseded or voided
information.
TRSP/TRGP -series
®
Santronic
– piezo touch activated faucet
Model Number (must specify):
 TRSP
Santronic® standard with piezo touch activation
 TRGP
Santronic® gooseneck with piezo touch activation
Supply (must specify):
 -1
Tempered or cold water
 -2
Thermostatic mixing valve (hot & cold supply)
Deckplates:
 -TRDP4
 -TRDPVR4


-TRDP8
-TRDPVR8
8” deckplate
8” vandal resistant deckplate
Other options:
 -(1)FS
 -(2)FS
 -P2927
 -FLEX12
 -FLEX16
Flexible stop with strainer
Flexible stops with strainer for TMV
Laminar nozzle
12” flexible supply
16” flexible supply
4” deckplate
4” vandal resistant deckplate
Santronic® Standard
Santronic® Gooseneck
Approved by Engineer/Architect
Job Name __________________
Date ______________________
Model _____________________
Quantity ___________________
Title ______________________
Signature _______________
INTERSAN MANUFACTURING COMPANY
1748 W. Fillmore St. – Phoenix, AZ 85007 – (800) 999-3101 – Fax: (602) 254-3101 – www.intersanUS.com
All information including dimensions, changes in design and material are subject to manufacturer’s change without formal notice and without obligation. Intersan assumes no responsibility for use of superseded or
voided information.
Download PDF
Similar pages