User’s Guide
Digital Video Baby Monitor
Models: MBP482, MBP482-2, MBP482-3, MBP482-4
The features described in this User’s Guide are subject to modifications without prior notice.
Welcome...
to your new Motorola Baby monitor!
Thank you for purchasing the Digital Video Baby Monitor. Now you can see
and hear your baby sleeping in another room or you can monitor your older
children in their play room.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola product, you will need to provide a copy
of your dated sales receipt to confirm warranty status. Registration is not
required for warranty coverage.
For product-related questions, please call:
US and Canada 1-888-331-3383
Email: support@motorolahome.com
This User's Guide provides you with all the information you need to get the
most from your product.
Before you use the baby monitor, we recommend you insert and fully
charge the battery in the Parent Unit, so that it continues to work if you
disconnect it from the mains power to carry it to another location. Please
read the Safety Instructions on page 8 before you install the units.
Got everything?
• 1 x Parent Unit
• 1 x Baby Unit (Camera Unit)
• 1 x Rechargeable Ni-MH battery pack for the Parent Unit
• 1 x Battery door for Parent Unit
• 1 x Power adaptor for the Parent Unit
• 1 x Power adaptor for the Baby Unit
In multi-Baby Unit packs, you will find one or more additional Baby Unit
units with power adaptor units.
Overview of your Baby Unit
2
1
1.
2.
3.
3
Power ON/OFF switch
Slide to turn the Baby Unit on or off.
Power/Link indicator
Green when the Baby Unit is turned on and linked to the Parent Unit.
Flashes Green when the Baby Unit is searching for the Parent Unit, or is
in the pairing process.
Off when the Baby Unit is powered off.
PAIR
Press and hold to pair to the Parent Unit.
Overview of the Parent Unit
4
1
5
2
6
3
7
8
1.
2.
Sound Level indicators
The sound level indicators show the
sound level as detected by the Baby
Unit.
Sound level detected by the Baby Unit:
The more LEDs light on, the stronger
the sound is detected.
Control key panel
UP / VOLUME
Press to increase the speaker volume.
While in the menu, press to scroll up.
While viewing a zoomed image, press
and hold to move the image upward.
DOWN / VOLUME
Press to decrease the speaker volume.
While in the menu, press to scroll down.
While viewing a zoomed image, press
and hold to move the image downward.
LEFT <
While viewing a zoomed image, press
and hold to move the image leftward.
ZOOM / RIGHT
While in a menu, press to choose the
option on the right side.
While viewing a zoomed image, press
to zoom out or press and hold to move
the image rightward.
3.
4.
5.
6.
7.
8.
OK
While in a menu, press to choose an
item, or save a setting.
Power ON/OFF indicator
Red when the Parent Unit is turned on.
Flashes red when the Parent Unit is
searching for the Baby Unit, or is in the
pairing process.
Off when the Parent Unit battery is fully
charge.
Battery level indicator
Battery symbol bars scroll when the
Parent Unit battery is being charged.
Flashes when the Parent Unit battery is
low and needs charging.
Off when the Parent Unit battery is not
being charged, or when no battery is
installed.
LCD display
Press to enter the main menu.
Power ON/OFF button 0p
Press and hold to turn the Parent Unit on
or off.
Press to turn the screen on or off.
Parent Unit Status Icons
Connection status
displays when strong signal strength is detected between
the Baby Unit and the Parent Unit.
or
displays when moderate signal strength is detected
between the Baby Unit and the Parent Unit.
flashes when the Parent Unit is out of the valid range.
-
displays when the link between the Baby Unit and the Parent
Unit is lost.
Patrol mode
- Displays when the Parent Unit is in patrolling mode.
Current view status
- Displays the number of the Baby Unit that is being viewed in
patrol mode.
Zoom
- Displays when the microphone is muted.
Volume off
- Displays when the volume is turned off.
20°C
or
69°F
Temperature
- Displays the current temperature the Baby Unit has detected.
Battery status
>
>
>
animates when the battery is charging.
displays solid when the battery is fully charged.
displays when the battery is low and needs charging.
displays when no battery is installed and AC power is being
used, or when the battery has been installed incorrectly.
Important guidelines for installing your baby monitor
• To use your Baby Unit and Parent Unit together, you must be able to
establish a radio link between them, and the range will be affected by
environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, a
metallic door or reinforced concrete, between the Baby Unit and Parent
Unit may block the radio signal.
• The signal strength may also be reduced by other solid structures, like
walls, or by radio or electrical equipment, such as TVs, computers,
cordless or mobile phones, fluorescent lights or dimmer switches.
• If the signal is poor, try moving the Parent Unit and/or the Baby Unit to
different positions in the rooms.
Table of contents
1.
2.
Safety Instructions ..................................................................................... 7
Getting Started........................................................................................ 10
2.1
2.2
2.3
3.
Connecting Baby Unit to power............................................................... 10
Installing the battery and connecting Parent Unit to power.................... 11
Desktop Mount of Parent Unit .................................................................. 12
Using Your Baby Monitor ........................................................................ 13
3.1
3.2
3.3
3.4
3.5
3.6
3.7
Power on or off the Baby Unit ................................................................... 13
Power on or off the Parent Unit................................................................. 13
Turn off the Parent Unit screen ................................................................. 13
Adjust the speaker volume for Parent Unit............................................... 13
Adjust the LCD brightness of the Parent Unit .......................................... 13
Set the alarm on the Parent Unit ............................................................... 14
Monitor the temperature .......................................................................... 14
3.7.1
Temperature format ................................................................. 14
3.8 Delete a Baby Unit..................................................................................... 14
3.9 Set the screen off time of the Parent Unit................................................. 15
3.10 Zoom ......................................................................................................... 15
3.11 Pair and replace extra new Baby Unit....................................................... 15
4.
5.
6.
7.
6
Disposal of the Device (environment) .................................................... 16
Cleaning .................................................................................................. 17
Troubleshooting ...................................................................................... 18
General Information ................................................................................ 20
Table of contents
ENGLISH
1. Safety Instructions
WARNING:
STRANGULATION HAZARD - Keep the unit
and adaptor cord more than 3 feet from the crib
and out of the baby's reach. NEVER place Baby
Unit or cords within the crib. Secure the cords
more than 3 feet away from the baby's reach.
Never use extension cords with AC Adaptors.
Only use the AC Adaptors provided.
Safety Instructions
7
BABY UNIT SET UP & USE:
● Determine a location for the BABY UNIT that will provide the best view
of your baby in his/her crib.
● Place the BABY UNIT on a flat surface, such as a dresser, bureau, or
shelf or mount the Unit to a wall securely using the keyhole slots under
the stand.
● NEVER place the Baby Unit or cords within the crib.
WARNING
This Baby Monitor is compliant with all relevant standards regarding
electromagnetic fields and is, when handled as described in the User's Guide,
safe to use. Therefore, always read the instructions in this User's Guide carefully
before using the device.
• Adult assembly required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This Baby Monitor is not a substitute for responsible adult supervision.
• Keep this user's guide for future reference.
• Keep the cords out of reach of children.
• Do not cover the Baby Monitor with a towel or blanket.
• Test this monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the Baby Monitor in damp areas or close to water.
• Do not install the Baby Monitor in extreme cold or heat, direct sunlight, or
close to a heat source.
• Only use the chargers and power adaptors provided. Do not use other
chargers or power adaptors as this may damage the device and battery pack.
• Only insert a battery pack of the same type.
• Do not touch the plug contacts with sharp or metal objects.
• Connect the power adaptors to easily accessible electrical outlets.
8
Safety Instructions
ENGLISH
CAUTION
You chance the risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to their instructions.
Use only the rechargeable battery pack with rating: 3.6V 800mAh
Safety Instructions
9
2. Getting Started
2.1
1.
2.
Connecting Baby Unit to power
Insert the DC plug of the power adaptor with the smaller DC plug into the
DC jack in the side of the Baby Unit.
Connect the other end of the power adaptor to a suitable power outlet.
NOTE
Only use the power adaptor provided.
10
Getting Started
Installing the battery and connecting Parent Unit to
power
A rechargeable battery pack is supplied and should be fitted, so that the Parent
Unit can be moved without losing the link and picture from the Baby Unit(s).
Charge the Parent Unit before you use it for the first time or when the Parent Unit
indicates that the battery is low.
BLACK
RED
Battery Pack
1.
2.
3.
4.
Slide off the battery compartment cover
Insert the plug of the battery pack into the jack inside the battery
compartment, and fit the battery pack into the compartment.
Replace the battery compartment cover, and pull out the stand (refer to
section 2.3).
Insert the DC plug of the power adaptor with the bigger DC plug into the
DC jack in the side of the Parent Unit.
Getting Started
11
ENGLISH
2.2
5.
Connect the other end of the power adaptor to a suitable power outlet, the
battery level indicator turns comes on.
NOTE
Only use the provided power adaptor and battery pack. The Parent Unit can
work with the power adaptor connected but without a battery pack installed.
2.3
Desktop Mount of Parent Unit
• Flip the stand from Parent rear to open position for desktop mount.
12
Getting Started
Please read these instructions carefully, and be aware that this baby monitor is only
intended as an aid. It is not a substitute for responsible, correct parental supervision.
3.1
Power on or off the Baby Unit
Slide the Power ON/OFF switch to turn on the Baby Unit. The Power/Link indicator
light turns on.
Slide the Power ON/OFF switch to turn off the Baby Unit. The Power/Link indicator
light turns off.
3.2
Power on or off the Parent Unit
Press and hold 0 to turn on the Parent Unit. The Power indicator light turns on.
Press and hold 0 again to turn off the Parent Unit. The Power indicator light turns off.
NOTE
If you place the parent and Baby Units too close together, you may hear a high
pitched noise. This is not a fault. The units are designed to be operated at some
distance apart, e.g. in separate rooms, so move the units further apart.
3.3
Turn off the Parent Unit screen
You can turn on or off the Parent Unit screen without powering off the Parent
Unit. You can still hear sound from the Baby Unit.
Press 0 on the Parent Unit to turn off the screen.
Press any key on the Parent Unit to turn on the screen again.
3.4
Adjust the speaker volume for Parent Unit
You can adjust the speaker volume from Volume 1 to Volume 5, or turn it off.
Press
or
on the Parent Unit when it is not in use.
When the speaker volume is set to off, the screen displays
3.5
.
Adjust the LCD brightness of the Parent Unit
You can adjust the brightness of the Parent Unit screen from Level 1 to Level 5 .
1.
2.
3.
Press
when the Parent Unit is not in use.
Press or to adjust the brightness.
Press O to confirm your selection.
Using Your Baby Monitor
is displayed.
13
ENGLISH
3. Using Your Baby Monitor
3.6
Set the alarm on the Parent Unit
You can use the Parent Unit to set the alarm as a reminder for you to take care of
your baby.
Turn on and set the alarm when it is currently off:
1.
2.
3.
4.
5.
Press
when the Parent Unit is not in use.
Press < or
to scroll to .
Press or to choose On , then press O.
Press or to choose 2h , 3h, 4h, 5h or 6h.
Press O to confirm your selection.
Turn off the alarm when it is currently on:
1.
2.
3.
4.
Press
when the Parent Unit is not in use.
Press < or
to scroll to
.
Press or to choose Off.
Press O to confirm your selection.
3.7
Monitor the temperature
Your Baby Unit measures the surrounding temperature. If the detected
temperature falls beyond a desired temperature range, you will hear an alert
tone. You can change the settings for the temperature format as follows.
3.7.1
Temperature format
You can choose to display the temperature in °F or °C.
1.
2.
3.
4.
3.8
Press
when the Parent Unit is not in use.
Press < or
to scroll to
.
Press or to choose °F or °C.
Press O to confirm your selection.
Delete a Baby Unit
You can choose to remove a paired Baby Unit from the Parent Unit.
1.
2.
3.
4.
5.
14
Press
when the Parent Unit is not in use.
Press < or
scroll to
.
Press or to select the desired Baby Unit (1 , 2 , 3 or 4 ).
Press or to choose YES or NO.
Press O to confirm your selection.
Using Your Baby Monitor
Set the screen off time of the Parent Unit
You can set the screen off time of the Parent Unit after being in idle mode for a
particular time interval.
1.
2.
3.
4.
Press
when the Parent Unit is not in use.
Press < or
to scroll to
.
Press or select ( 60m ,
30m, 5m or OFF).
Press O to confirm your selection.
3.10
Zoom
You can zoom in or out while viewing the image from Baby Unit.
1.
2.
3.
Press
to zoom in.
Press and hold <,
, or to move the zoomed image upward,
downward, leftward or rightward correspondingly.
Press
to zoom out.
3.11
Pair and replace extra new Baby Unit
The Baby Units and Parent Unit provided are already paired. You can add or
replace a Baby Unit in your video and audio monitoring system.
You can pair a maximum of four Baby Units to your Parent Unit. Each new Baby
Unit must be paired to the Parent Unit before use.
To pair and replace a Baby Unit:
1.
2.
3.
4.
Press
when the Parent Unit is not in use.
Press < or
to scroll to
.
Press or to choose a desired Baby Unit slot, then press O. The
pairing mode starts.
Turn on the new Baby Unit, and then immediately press and hold Pair until
the Power/Link indicator turns on.
NOTE
If you choose an occupied Baby Unit slot, the new Baby Unit will replace the
existing Baby Unit.
Using Your Baby Monitor
15
ENGLISH
3.9
4. Disposal of the Device (environment)
At the end of the product life cycle, you should not dispose of
this product with normal household waste. Take this product to
a collection point for the recycling of electrical and electronic
equipment. The symbol on the product, user's guide and/or
box indicates this.
Some of the product materials can be re-used if you take them
to a recycling point. By reusing some parts or raw materials from used products
you make an important contribution to the protection of the environment.
Please contact your local authorities in case you need more information on the
collection points in your area.
Dispose of the battery pack in an environmentally-friendly manner according to
your local regulations.
16
Disposal of the Device (environment)
Clean your Baby Monitor with a slightly damp cloth or with an anti-static cloth.
Never use cleaning agents or abrasive solvents.
Cleaning and care
• Do not clean any part of the Baby Monitor with thinners or other solvents and
chemicals - this may cause permanent damage to the product which is not
covered by the warranty.
• Keep your Baby Monitor away from hot, humid areas or strong sunlight, and
do not let it get wet.
• Every effort has been made to ensure high standards of reliability for your
Baby Monitor. However, if something does go wrong, please do not try to
repair it yourself - contact Customer Service for assistance.
IMPORTANT
Always switch off and disconnect the power adaptor before cleaning your baby
monitor.
Cleaning
17
ENGLISH
5. Cleaning
6. Troubleshooting
Power Indicator on the Parent Unit does not come on
• Check whether the Parent Unit is powered on.
• Check whether the battery pack supplied is correctly installed and that they
are not drained.
• Recharge the Parent Unit by connecting it to the power supply.
Power/Link Indicator on the Baby Unit flashes
• The Baby Unit may not be paired to the Parent Unit. Refer to section 3.11 to
pair the Baby Unit.
• The Parent Unit and the Baby Unit may be out of range with each other.
Reduce the distance between the units, but not closer than 3 feet.
• The Baby Unit may be switched off. Press the 0 button to switch on the Baby
Unit.
light on the Parent Unit flashes
• Battery pack in the Parent Unit is running low. Connect the Parent Unit to the
mains power with the supplied power adaptor for recharging.
The Parent Unit beeps
• The Parent Unit may have lost connection with the monitoring Baby Unit.
Reduce the distance between the Parent Unit and the Baby Unit, but not
closer than 3 feet.
• The Baby Unit may be switched off. Press the 0 button to switch on the Baby
Unit.
18
Troubleshooting
• The volume level in the Parent Unit may be set too low. Increase the volume
level of the Parent Unit. Refer to section 3.4 for volume level settings.
• The Parent Unit and the monitoring Baby Unit may be out of range with each
other. Reduce the distance between the units, but not closer than 3 feet.
The baby monitor system produces a high-pitched noise
• The Parent Unit and the Baby Unit are too close to each other. Make sure the
Parent Unit and Baby Unit are at least 3 feet away from each other.
• The speaker volume of the Parent Unit may be set too high. Decrease the
volume of the Parent Unit.
Battery pack in the Parent Unit is running low quickly
• The LCD brightness may be set too high. Try to decrease the brightness
level. Refer to section 3.5 for details.
• The volume level of the Parent Unit may be set too high which consumes
power. Decrease the volume level of the Parent Unit. Refer to section 3.4 for
volume level settings.
Troubleshooting
19
ENGLISH
Cannot hear sound or baby crying from the Parent Unit
7. General Information
lf your product is not working properly....
1.
2.
3.
Read this User’s Guide.
Visit our website: www.motorolahome.com
Contact Customer Service at:
US and Canada 1-888-331-3383
Email: support@motorolahome.com
To order a replacement battery pack for the Parent Unit, contact Customer Service.
Consumer Products and Accessories Limited Warranty
("Warranty")
Thank you for purchasing this Motorola branded product manufactured under
license by Binatone Electronics International LTD ("BINATONE")
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE warrants that this
Motorola branded product ("Product") or certified accessory ("Accessory") sold
for use with this product is manufactured to be free from defects in materials and
workmanship under normal consumer usage for the period outlined below. This
Warranty is your exclusive warranty and is not transferable.
Who is covered?
This Warranty extends only to the first consumer purchaser, and is not
transferable.
What will BINATONE do?
BINATONE or its authorized distributor at its option and within a commercially
reasonable time, will at no charge repair or replace any Products or Accessories
that does not conform to this Warranty. We may use functionally equivalent
reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
20
General Information
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR
BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF
THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE
ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE
FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or
consequential damages, or limitation on the length of an implied warranty, so
the above limitations or exclusions may not apply to you. This Warranty gives
you specific legal rights, and you may also have other rights that vary from one
jurisdiction to another.
General Information
21
ENGLISH
What Other Limitations Are There?
Products Covered
Consumer Products
Length of Coverage
One (1) year from the date of the product's
original purchase by the first consumer
purchaser of the product.
Consumer Accessories
Ninety (90) days from the date of the
accessories' original purchase by the first
consumer purchaser of the product.
The balance of the original warranty or for
Consumer Products and
Accessories that are Repaired or Ninety (90) days from the date returned to
the consumer, whichever is longer.
Replaced
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts
due to normal wear and tear are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their
rated capacity and batteries that leak are covered by this Warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation,
storage, misuse or abuse, accident or neglect, such as physical damage (cracks,
scratches, etc.) to the surface of the product resulting from misuse; (b) contact
with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the
like, extreme heat, or food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or Accessory to abnormal
usage or conditions; or (d) other acts which are not the fault of MOTOROLA or
BINATONE., are excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage
that result from the use of Non-Motorola branded or certified Products or
Accessories or other peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages resulting from
service, testing, adjustment, installation, maintenance, alteration, or
modification in any way by someone other than MOTOROLA, BINATONE or its
authorized service centers, are excluded from coverage.
22
General Information
Communication Services. Defects, damages, or the failure of Products or
Accessories due to any communication service or signal you may subscribe to
or use with the Products or Accessories is excluded from coverage.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
US and Canada 1-888-331-3383
Email: support@motorolahome.com
You will receive instructions on how to ship the Products or Accessories at your
expense and risk, to a BINATONE Authorized Repair Center.
To obtain service, you must include: (a) the Product or Accessory; (b) the
original proof of purchase (receipt) which includes the date, place and seller of
the Product; (c) if a warranty card was included in your box, a completed
warranty card showing the serial number of the Product; (d) a written
description of the problem; and, most importantly; (e) your address and
telephone number.
These terms and conditions constitute the complete warranty agreement
between you and BINATONE regarding the Products or Accessories purchased
by you, and supersede any prior agreement or representations, including
representations made in any literature publications or promotional materials
issued by BINATONE or representations made by any agent employee or staff
of BINATONE, that may have been made in connection with the said purchase.
General Information
23
ENGLISH
Altered Products. Products or Accessories with (a) serial numbers or date tags
that have been removed, altered or obliterated; (b) broken seals or that show
evidence of tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or parts, are excluded from
coverage.
FCC, ACTA and Industry Canada (IC) Regulations
Warning: Changes or modifications to this equipment not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian requirement: CAN ICES3 (B)/NMB-3(B)
Caution: To maintain the compliance with the FCC’s RF exposure guideline,
place the Baby Unit at least 8 inches from nearby persons.
24
General Information
General Information
25
ENGLISH
For body worn operation, the Parent Unit has been tested and meets the FCC
RF exposure guidelines when used with the belt clip supplied or designated for
this product. Use of other accessories may not ensure compliance with FCC RF
exposure guide lines.
Technical Specifications
Baby Unit
Frequency
2407.5 - 2475 MHz
Channels
21
Operating temperature
5ºC - 45ºC
Image sensor
Color CMOS 0.3M Pixels
Lens
f 2.7mm, F 2.6
Power supply adaptor
Input 100-240VAC, 50/60Hz, 150mA
Rating
Output 6VDC, 400mA.
26
General Information
Frequency
ENGLISH
Parent Unit
2407.5 - 2475 MHz
Channels
21
Operating temperature
5ºC - 45ºC
Display
2.4" diagonal TFT LCD
Brightness control
5 steps
Battery rating
3.6V 800mAh Ni-MH battery pack
Power supply adaptor
Input 100-120VAC, 50/60Hz, 150mA.
Rating
Output 6VDC, 400mA.
Specifications are subject to change without prior notice.
General Information
27
Manufactured, distributed or sold by
Binatone Electronics International LTD.,
official licensee for this product.
MOTOROLA and the Stylized M Logo are
trademarks or registered trademarks of
Motorola Trademark Holdings, LLC. and are
used under license. All other trademarks are
the property of their respective owners.
© 2016 Motorola Mobility LLC.
All rights reserved.
EN_US Version 6.0
Printed in China
Download PDF
Similar pages