COMMERCIAL SHOWER SYSTEMS

COMMERCIAL SHOWER SYSTEMS
2.5 GPF SHOWER SYSTEM KIT
WITH HAND SHOWER, SHOWERHEAD & TUB SPOUT
MODEL NUMBER:
1662.224 Commercial Shower System Kit
Includes:
• Shower Valve with SS
• Colony Soft Shower Only Trim
with Showerhead
• Fixed Hand Shower - 2.5 GPM
• In-Line Vacuum Breaker
• Metal Hose
• Wall Supply
• 36" Slide Bar
• 3-Way Diverter Valve
• Diverter Handle
• Slip-On Tub Spout
GENERAL DESCRIPTION:
1660.505.002
1660.400.002
8888.035.002
8888.037.002
1660.236.002
R430
T420.430
8888.056
PRODUCT FEATURES:
VALVE:
Complete commercial shower system includes: an R120SS
pressure balance valve and trim, a wall supply with 1/2"
NPT female inlet and 1/2" NPSM male outlet, a 59"
(1500mm) metal shower hose, vacuum breaker, a “Fixed”
personal shower, 3-way diverter valve, showerhead, slip-on
tub spout and a 36" Slide Bar. Valve features a cast brass
body, washerless 47mm ceramic disc valve cartridge with
volume and temperature control and hot limit safety stop.
Pressure balancing cartridge maintains constant output
temperature in response to changes in relative hot and cold
supply pressure. One-half inch direct sweat inlets and
outlets. With screwdriver stops. Durable metal handle.
Rough-in plaster guard designed for use as thin-wall
mounting adaptor. Fixed hand shower with 2.5gpm/9.5L/min.
flow restrictor. Slide bar features an adjustable shower
holder which can be set at any height or position along the
bar and angle up to 45˚.
Cast Brass Valve Body: Durable.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows
temperature and volume.
control
over
water
Pressure Balancing Valve Cartridge: Maintains
constant output temperature in response to changes in hot
and cold supply pressure.
Adjustable Hot Limit Safety Stop: Limits the amount
of hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Integral Plaster Guard and Mounting Plate:
Protects valve during installation and serves as a mounting
plate for thin-wall installations.
PERSONAL SHOWER:
Lightweight, Ergonomic Design:
For a sure grip
even with wet, soapy hands.
FLOW RATE
SLIDE BAR:
Simple Height Adjustment: Allows positioning of the
personal shower anywhere along the bar.
3
GALLONS PER MINUTE
R120SS
T675.501.002
2
1
0
20
40
60
80
100
INLET PRESSURE (PSI)
SUGGESTED SPECIFICATION:
Shower system shall feature a wall supply with 1/2" NPT female inlets and 1/2" NPSM male outlet, 59" metal hose, vacuum
breaker, 2.5 gpm/9.5L/min. personal shower, 3-way diverter valve, showerhead, slip-on tub spout and a 36" Slide Bar.
Pressure Balance valve shall feature a cast brass body. Shall feature ceramic disc valve cartridge which controls water
temperature and volume. Shall also feature hot limit safety stop. Fitting shall be American Standard Model # 1662.224.002.
© 2012 AS America Inc.
L317
4/11
COMMERCIAL SHOWER SYSTEMS
2.5 GPF SHOWER SYSTEM KIT
WITH HAND SHOWER, SHOWERHEAD & TUB SPOUT
CODES AND STANDARDS
Install as required to comply with local code
requirements.
ASME A112.18.1
ASSE 1016
ANSI A117.1
CSA B 125
Finish
Product
Number
1662.224
Polished
Chrome
Description
002
Commercial Shower System Kit. Contains pressure balance valve with volume and temperature control,
trim kit, “Fixed” hand shower, metal hose, vacuum breaker, wall supply, 3-way diverter, showerhead, slip-on
tub spout and 36" slide bar. 2.5gpm/9.5L/min.
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the physically challenged.
"SEE ILLUSTRATION BELOW"
6"
(153mm)
1/2 NOM.
COPPER
SWEAT ALL
CONNECTIONS
6-3/4"
(171mm)
FINISHED WALL
70mm
(2-3/4")
103mm
(4-1/16")
57mm HOLE SIZE
(2-1/4")
41mm MIN.
(1-5/8")
2-3/4"
(70mm)
FINISHED
WALL
65mm
(2-1/2")
3-3/4"
(95mm)
178mm
(7")REF.
FINISHED
WALL
71mm
(2-3/4")
3-7/8"
(98mm)
102mm
(4")REF.
1/2" NPT
SHOWER
ARM
66mm MAX.
(2-5/8")
51mm
(2")
3"
(76mm)
32mm (1-1/4")
DIA. HOLE
ALL CONNECTIONS 1/2" NPT
(R430)
SWEAT INLETS
w/STOPS
(R120SS)
149mm
(5-7/8")
127mm
(5")
45mm
(1-3/4")
82mm
(3-1/4")
FINISHED
WALL
130mm
(5-1/8")
REF.
13mm (1/2")
INLET:
1/2" NPT
1829mm (72")
to 1990mm (78")
(OPTIONAL)
TO FINISHED
FLOOR
© 2012 AS America Inc.
1/2" COPPER
32mm(1-1/4")
DIA HOLE
849mm
(33-3/8")
900mm
(35-3/8")
32mm
(1-1/4")
67mm
(2-5/8")
53mm
(2-1/16")
OUTLET:
1/2" NPSM HOSE
CONNECTION
RUBBER GASKET
FINISHED WALL
24mm
(1")
146mm
(5-3/4")
1/2" NPSM
L318
86mm
(3-3/8")
4/11
Download PDF
Similar pages