5713222971/07.14
www.delonghi.com
ECAM28.465
COFFEE MAKER
Instructions for use. Keep these instructions
Visit www.delonghiregistration.com to register
your product
Visit www.delonghi.com for a list of service
centers near you.
ELECTRIC CHARACTERISTICS
120 V~ 60 Hz 1250 W
MACHINE À CAFÉ
Mode d’emploi . Conservez cette notice
Visitez www.delonghiregistration.com pour
enregistrer votre produit en ligne.
Visitez www.delonghi.com pour y voir une liste
des centres de réparation proches de chez vous.
CARACTÉRISTIQUES ÉLECTRIQUES
120 V~ 60 Hz 1250 W
CAFETERA
Repase y guarde estas instrucciones.
Lea cuidadosamente este instructivo antes de usar
su aparato.
Visite www.delonghiregistration.compara
registrar su producto en línea.
Visite www.delonghi.com para ver la lista de
centros de servicios cercanos a usted.
CARACTERISTICAS ELECTRICAS:
120 V~ 60 Hz 1250 W
EN FR page 6
page 24
ES
pág. 43
B
B2
B3
B4
B5
B6
B1
B7
B13
B8
B9
C
B10
B11
B12
D
D1
C1
D2
A18
D3
C3
C4
C2
D4
D5
D6
2
A
A1
A2
A5
A3
A6
A4
A11
A12
A7
A13
A8
A14
A9
A15
A16
A10
A22
A18
A17
A20
A19
A21
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4
17
18
19
20
21
22
23
24
25
26
27
28
B
SH
A
PU
SH
PU
29A
B
29B
30
31
5
32
A
CONTENTS
IMPORTANT SAFEGUARDS..................................7
MAKING DRINKS WITH MILK............................ 14
SHORT CORD INSTRUCTIONS...............................7
INTRODUCTION.................................................8
Symbols used in these instructions.............................8
Troubleshooting and repairs.......................................8
Filling and attaching the milk container...................14
Adjusting the amount of froth..................................14
Making drinks with milk automatically.....................14
Cleaning the milk frother with the CLEAN button ....14
Programming the quantity of coffee and milk in the
cup for the CAFFELATTE, CAPPUCCINO, MACCHIATO and
MILK buttons............................................................15
DESCRIPTION....................................................8
DELIVERING HOT WATER AND STEAM................ 15
SAVE THESE INSTRUCTIONS .........................................7
Delivering hot water ................................................15
Change the quantity of water delivered
automatically. ....................................................... 15
Delivering steam.......................................................15
Tips for using steam to froth milk..............................15
Cleaning the spout after use.....................................15
Description of the appliance .......................................8
Description of the control panel..................................8
Description of the milk container................................9
Description of the accessories.....................................9
PRELIMINARY CHECKS.......................................9
Checking the appliance...............................................9
Installing the appliance..............................................9
Connecting the appliance...........................................9
CLEANING....................................................... 16
Cleaning the coffee grounds container......................16
Cleaning the drip tray and condensate tray...............16
Cleaning the inside of the coffee maker....................16
Cleaning the water tank............................................16
Cleaning the coffee spouts........................................16
Cleaning the pre-ground coffee funnel.....................16
Cleaning the infuser..................................................17
Cleaning the milk container......................................17
Cleaning the hot water/steam nozzle.......................18
TURNING THE APPLIANCE ON........................... 10
TURNING THE APPLIANCE OFF.......................... 10
MENU SETTINGS.............................................. 10
Rinsing......................................................................10
Descale.....................................................................10
Install filter...............................................................10
Replacing the filter...................................................10
Adjust time...............................................................10
Auto-start.................................................................10
Auto-Off....................................................................11
Cup warmer..............................................................11
Energy Saving...........................................................11
Setting the temperature...........................................11
Setting water hardness.............................................11
Beep.........................................................................11
Setting the language ...............................................12
Cup lighting..............................................................12
Default values (reset)................................................12
Statistics function.....................................................12
DESCALE......................................................... 18
SETTING WATER HARDNESS.............................. 18
Measuring water hardness........................................18
Setting water hardness.............................................19
WATER SOFTENER FILTER................................. 19
Installing the filter....................................................19
Replacing the filter...................................................20
Removing the filter...................................................20
TECHNICAL SPECIFICATION............................... 20
DISPLAYED MESSAGES..................................... 20
TROUBLESHOOTING......................................... 21
LIMITED WARRANTY........................................ 23
MAKING COFFEE.............................................. 12
Selecting the coffee taste..........................................12
Selecting the quantity of coffee in the cup ...............12
Customising the “my coffee” quantity .......................12
Adjusting the coffee mill...........................................13
Tips for a hotter coffee..............................................13
Making coffee using coffee beans.............................13
Making coffee using pre-ground coffee....................13
What does the warranty cover?.................................23
How long does the coverage last?.............................23
What is not covered by the warranty?.......................23
How do you get service?...........................................23
How does country law apply?...................................23
6
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following.
• Read all instructions carefully.
• Make sure the voltage of your electrical system corresponds to the voltage shown on the bottom of the
machine.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against fire, electrical shock and personal injury, do not immerse cord, plug or appliance in
water or other liquid.
• Keep the appliance out of the reach of children and do not leave appliance unattended while in operation.
• Unplug from the outlet when not in use and before cleaning.
• Do not operate with a damaged cord or plug, or after the appliance malfunctions, or has been damaged
in any manner. Return the appliance to the nearest authorized service facility for examination, repair or
adjustment.
• The use of accessory attachments not recommended by the manufacturer may result in fire, electrical
shock, or personal injury.
• Do not use outdoors.
• Make sure the power cord does not hang over the edge of the table or counter-top to avoid getting accidentally caught or entangled.
• Do not place the appliance or its electrical parts on or near electric stoves, cooking surfaces, or gas burners.
• Plug cord into the wall outlet. To disconnect, first turn machine “off”, then remove plug from wall outlet.
• Do not use the appliance for other than the intended use. This appliance is to be utilized for domestic
use only. The manufacturer declines all responsibility for any damage caused by improper, incorrect, or
irresponsible use.
WARNING: To reduce the risk of fire or electric shock, do not remove the cover or the exterior of
the unit. Don’t attempt to repair or modify the machine, doing so will void the warranty. Repair
should be done by authorized service personnel only!
SAVE THESE INSTRUCTIONS
THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY
SHORT CORD INSTRUCTIONS
- A short power cord is provided to reduce risks resulting from becoming entangled in or tripping over a
longer cord.
- Longer, detachable power supply cords or extension cords are available and may be used if care is exercised in their use.
- If an extension cord is used, the marked electrical rating should be at least as great as the electrical rating
of the appliance. If the appliance is provided with 3- wire, grounding type cord, the extension should be
a GROUNDING TYPE 3 - WIRE CORD. The longer cord should be arranged so that it will not drape over the
counter-top or table top where it can be pulled on by children or tripped over.
- Your product is equipped with a polarized alternating current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
7
INTRODUCTION
DESCRIPTION
Description of the appliance
Thank you for choosing the ECAM28.465 automatic coffee and
cappuccino maker.
We hope you enjoy using your new appliance.
Take a few minutes to read these instructions.
This will avoid all risks and damage to the machine.
(page 3 - A )
A1. Beans container lid
A2. Top lid
A3. Grinding adjustment dial
A4. Beans container
A5. Pre-ground coffee funnel lid with pressure lock
A6. Pre-ground coffee funnel
A7. Main switch
A8. Socket for power cable connector
A9. Infuser
A10. Infuser door
A11. Cup warmer shelf
A12. Control panel
A13. Coffee spout (adjustable height)
A14. Hot water and steam nozzle
A15. Condensate tray
A16. Water tank lid
A17. Water tank
A18. Water filter (some models only)
A19. Cup tray
A20. Drip tray water level indicator
A21. Drip tray
A22. Coffee grounds container
Symbols used in these instructions
Important warnings are identified by these symbols.
It is vitally important to observe these warnings.
Danger!
Failure to observe the warning could result in life threatening
injury from electric shock.
Important!
Failure to observe the warning could result in injury or damage
to the appliance.
Danger of burns!
Failure to observe the warning could result in scalds.
Please note:
This symbol identifies important advice or information for the
user.
Letters in brackets
The letters in brackets refer to the legend in the Description of
the Appliance on page 3.
Description of the control panel
(page 2 - B )
A number of buttons on the panel have a double function. This is
indicated in brackets in the description.
button: turns the appliance on and off
B1.
: button: to select the coffee quantity
B2.
B3. MENU button to access the menu (When in the settings
MENU, it acts as the “ESC” button to exit from the selected
function and go back to the main menu).
B4. Display: guides the user in using the appliance.
B5.
button: to deliver hot water (When in the settings
menu, press to confirm the selection)
button: to make 1 cup of coffee with the settings
B6.
displayed
aroma selection button: to select the coffee taste
B7.
B8. CAFFELATTE button: to deliver a caffelatte
B9. CAPPUCCINO button: to deliver a cappuccino (When in
the settings menu, press to scroll backwards)
B10.LATTE MACCHIATO button: to deliver a macchiato
B11.MILK button: to deliver a cup of milk (When in the settings
menu, press to scroll forwards)
B12: button: to deliver steam
button: to make 2 cups of coffee with the setB13.
tings displayed
Troubleshooting and repairs
In the event of problems, first try and resolve them following
the information given in the section “Displayed messages” on
page 20 and “Troubleshooting” on page 21.
If this does not resolve the problem or you require further information, you should consult Customer Experience by calling
the number given on the annexed “Customer Experience” sheet.
If your country is not among those listed on the sheet, call the
number given in the guarantee.
If repairs are required, contact De’Longhi Customer Experience
only.
Contact details are given in the guarantee certificate provided
with the appliance.
8
Description of the milk container
Connecting the appliance
Description of the accessories
Important!
Check that the mains power supply voltage corresponds to
the value indicated on the rating plate on the bottom of the
appliance.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified
professional.
(page 2 - C )
D1. Froth adjustment and CLEAN dial
D2. Frothed milk spout (adjustable)
D3. Milk intake tube
D4. Milk container
(page 2 - D )
D1. Pre-ground coffee measure
D2. Cleaning brush
A18. Water filter (certain models only)
D3. Cappuccino maker/hot water spout
D4. Power cable
D5. “Total Hardness Test” indicator paper
D6. Descaler
Using the appliance for the first time
Please note!
Coffee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of coffee
in the mill.
The machine is, however, guaranteed to be new.
• You should customise water hardness as soon as possible
following the instructions in the section “Setting water
hardness” (page 18).
1. Insert the power cable connector into the socket at the
back of the appliance and connect the appliance to the
mains electricity supply (fig. 1). Make sure the main switch
at the back of the appliance is pressed (fig. 2).
Select the desired language by scrolling forwards or backwards
using the CAPPUCCINO or MILK or alternatively waiting for
the language options to scroll automatically on the display
(about every 3 seconds):
2. When “English” appears, press and hold the
button
(fig. 3) for a few seconds until “English set” is displayed.
Follow the instructions displayed by the appliance:
3. “FILL TANK!”: remove the water tank (fig. 4), open the lid,
fill to the MAX line with fresh water (fig. 5); close the water
tank lid and replace the water tank.
4. “INSERT WATER SPOUT!”: Check that the hot water spout is
inserted on the nozzle and place a container (fig. 6) with a
minimum capacity of 100 ml underneath.
5.“HOT WATER, Press OK” is displayed;
6. Press the button to confirm (fig. 3): the appliance delivers water from the spout then goes off automatically.
The coffee maker is now ready for normal use.
•
PRELIMINARY CHECKS
Checking the appliance
After removing the packaging, make sure the product is complete and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact De’Longhi Customer Experience.
Installing the appliance
Important!
When installing the appliance, respect the following safety
warnings:
• The appliance gives off heat.
After positioning the appliance on the worktop, leave a
space of at least 1.18 in / 3 cm between the surfaces of the
appliance and the side and rear walls and at least 5.9 in/ 15
cm above the coffee maker.
• Water penetrating the coffee maker could cause damage.
Do not place the appliance near taps or sinks.
• The appliance could be damaged if the water it contains
freezes.
Do not install the appliance in a room where the
temperature could drop below freezing point.
• Arrange the power cable in such a way that it cannot be
damaged by sharp edges or contact with hot surfaces (e.g.
electric hot plates).
•
•
•
9
Please note!
When using the appliance for the first time, you need to
make 4-5 cups of coffee or 4-5 cappuccinos before the appliance starts to give satisfactory results.
When making the first 5-6 cappuccinos, it is normal to hear
the noise of boiling water. After this, the noise becomes
less.
To enjoy your coffee even more and improve the performance of your appliance, we recommend installing a water
Rinsing
softener filter as described in the section “ WATER SOFTENER FILTER “ (page 19). If your model is not provided
with a filter, you can request one from De’Longhi Customer
Services.
Use this function to deliver hot water from the spout to heat the
internal circuit and make the coffee delivered hotter.
To enable the function, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (fig. 8) until “Rinsing” is displayed;
button. The message “Confirm?” is
3. Press the
displayed;
(fig. 3): after a few seconds, hot water
4. Press the
flows out of the spout, heating the internal circuit and making the coffee delivered hotter.
TURNING THE APPLIANCE ON
Please note!
Before turning the appliance on, make sure the main switch is
pressed (fig. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this cycle.
Please note!
Press any button to stop hot water delivery at any time.
Danger of burns!
During rinsing, a little hot water comes out of the coffee spouts
and is collected in the drip tray underneath.
Avoid contact with splashes of water.
button (fig. 7).
• To turn the appliance on, press the
The message “Heating up, Please wait” is displayed.
After heating, the message “RINSING” is displayed. As well as
heating the boiler, the appliance also heats the internal circuits
by circulating hot water.
The appliance is at temperature when the message indicating
the taste and quantity of coffee appears.
Descale
For instructions on descaling, see page 18.
Install filter
For instructions on how to install the filter, see the section “Installing the filter (page 19).
Replacing the filter
For instructions on how to replace the filter, see the section “Replacing the filter” (page 20).
TURNING THE APPLIANCE OFF
Whenever the coffee machine is turned off after being used to
make coffee, it performs an automatic rinse cycle.
Adjust time
To adjust the time on the display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (fig. 8) until “Adjust time” is displayed;
button (fig. 3);
3. Press the
4. Press the MILK or CAPPUCCINO button (fig. 8) to change
the hours;
button to confirm;
5. Press the
6. Press the MILK or CAPPUCCINO button (fig. 8) to change
the minutes;
button to confirm.
7. Press the
This sets the time. Press the MENU/ESC button to exit the menu.
Danger of burns!
During rinsing, a little hot water flows from the coffee spouts.
Avoid contact with splashes of water.
To turn the appliance off, press the
button (fig. 7). The
appliance performs a rinse cycle, then the message “Turning off
underway Please wait...” is displayed and the appliance goes off
(standby).
Please note!
If the appliance is not used for an extended period, switch off
the machine at the main switch.
• first turn the appliance off by pressing the
button
(fig. 7);
• release the main switch at the side of the appliance (fig. 2).
Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Important!
Never press the main switch while the appliance is on.
Please note!
To enable this function, the time must already have been set
correctly.
To enable Auto-on, proceed as follows:
MENU SETTINGS
When you access the programming menu by pressing the
MENU/ESC button, the following menu items are available:
10
Energy saving
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (fig. 8) until “Auto-start” is displayed;
3. Press the
button. “Enable?” is displayed;
4. Press the
button to confirm;
5. Press the MILK or CAPPUCCINO button (fig. 8) to change
the hours;
6. Press the
button to confirm;
7. Press the MILK or CAPPUCCINO button (fig. 8) to change
the minutes;
8. Press the
button to confirm;
9. Press the MENU/ESC button to exit the menu.
Once the time has been confirmed, enabling of auto-start is indicated by the
symbol displayed alongside the time and
under the Auto-start item in the menu.
To disable the function:
1. Select auto-start from the menu;
2. Press the
button. “Disable?” is displayed;
3. Press the
button to confirm.
The
symbol is no longer displayed.
Use this function to enable or disable energy saving mode.
When enabled, the function reduces energy consumption in
compliance with European regulations.
To disable (or enable) “energy saving” mode, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (fig. 8) until “Energy saving” is displayed;
3. Press the
button. “Disable?” is displayed (or “Enable?” if the function has been disabled);
4. Press the
button to disable (or enable) energy
saving mode;
5. Then press the MENU/ESC button to exit the menu.
When the function is enabled, if the machine is not used for
about 1 minute, “Energy Saving” is displayed.
Please note!
When in energy saving mode, a few seconds elapse before
the first coffee, cappuccino or milk based coffee is delivered
as the appliance must heat up again.
• To prepare any drink, press any button to exit energy
saving, then press the button corresponding to the drink
you want to make.
• If the milk container is inserted, “Energy saving” is not
activated.
•
Auto-off
The time can be changed so that the appliance switches off after
15 or 30 minutes, or after 1, 2 or 3 hours.
To re-programme Auto-off, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (fig. 8) until “Auto-off” is displayed;
3. Press the
button;
4. Press the MILK or CAPPUCCINO button (fig. 8) until the
desired operation time is displayed (15 or 30 minutes, or 1,
2 or 3 hours);
button to confirm;
5. Press the
6. Press the MENU/ESC button to exit the menu.
Auto-off is programmed.
Setting the temperature
To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (fig. 8) until “Set
temperature” is displayed;
3. Press the
button;
4. Press the MILK or CAPPUCCINO button until the required
temperature (●= low; ●●●●= high) is displayed;
5. Press the
button to confirm;
6. Press the MENU/ESC button to exit the menu.
Cup warmer
This function enables or disables the cup warmer.
Proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (fig. 8) until “Cup
warmer” appears on the display;
button. “Disable?” is displayed (or “Ena3. Press the
ble?” if the function has been disabled);
4. Press the
button to disable (or enable) the
function.
5. Press the MENU/ESC button to exit the menu.
Warming the cups keeps the coffee hot.
Setting water hardness
For instructions on setting water hardness, see page 18.
Setting the language
To change the language for the display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (fig. 8) until “Set
language” is displayed;
3. Press the
button;
4. Press the MILK or CAPPUCCINO button until the required
language is displayed;
5. Press the
button to confirm;
11
6. A message confirming the language installed is displayed;
7. Then press the MENU/ESC button to exit the menu.
3.
4.
-
-
Press the
button;
Press the MILK or CAPPUCCINO button (fig. 8) to verify:
how many coffees have been made;
the total number of cappuccinos and milk based coffees
made;
- the total number of litres of water delivered;
- how many times the machine has been descaled;
- how many times the water softener filter has been
replaced.
5. Press the MENU/ESC button twice to exit the menu.
Beep
This enables or disables the beep emitted by the machine each
time the buttons are pressed or an accessory is inserted/removed. The beep is enabled by default.
To disable or re-enable the beep, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (fig. 8) until
“Beep” is displayed;
3. Press the
button. “ Disable?” or “ Enable?” is
displayed;
4. Press the
button to enable or disable the beep;
5. Press the MENU/ESC button to exit the menu.
MAKING COFFEE
Selecting the coffee taste
The appliance is set by default to make coffee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
button (fig. 9) repeatTo change the taste, press the
edly until the required taste is displayed.
Cup lighting
This function enables or disables the cup lighting. The lighting
is enabled by default.
The lights come on each time coffee and drinks with milk are
made and during each rinse cycle.
To disable or re-enable this function, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (fig. 8) until “Cup
lighting” is displayed.
3. Press the
button. “ Disable?” or “ Enable?” is
displayed;
button to enable or disable the cup
4. Press the
lighting;
5. Press the MENU/ESC button to exit the menu.
Selecting the quantity of coffee in the cup
The appliance is set by default to make a standard quantity of
coffee. To select the quantity of coffee, press the
button (fig. 10) until the message corresponding to the required
quantity of coffee is displayed:
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as previously set).
To reset the default values, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (fig. 8) until “Default values” is displayed;
button;
3. Press the
4. The message “Confirm?” is displayed.
5. Press the
button to confirm and exit.
Coffee selected
Quantity in cup (ml)
MY COFFEE
Programmable:
from ≃20 to ≃180
SHORT
≃40
STANDARD
≃60
LONG
≃90
EXTRA LONG
≃120
Customising the “my coffee” quantity
The appliance is set by default to automatically deliver 30 ml
of “my coffee”.
To modify this quantity, proceed as follows:
1. Place a cup under the coffee spouts (fig. 14).
2. Press the
button (fig. 10) until “MY COFFEE” is
displayed.
Statistics function
This displays statistics relating to the machine.
To display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (fig. 8) until “Statistics” is displayed;
12
3. Lower the spouts as near as possible to the cup. This makes
a creamier coffee (fig. 15).
4. Press the button corresponding to the number of coffees
or 2 cups
, figs. 11 and
required (1 cup
16).
5. Preparation begins. The amount of coffee selected is displayed together with a progress bar which gradually fills as
preparation progresses.
button (fig. 11) pressed until the message
3. Keep the
“1 MY COFFEE Program quantity” is displayed and coffee
delivery begins. Release the button.
4. As soon as the coffee in the cup reaches the required level,
(fig. 11) again.
press the button
The quantity of coffee in the cup has now been programmed.
Adjusting the coffee mill
The coffee mill is preset in the factory to make coffee correctly
and should not require adjusting initially.
However, if after making the first few coffees you find that the
coffee is too thin and not creamy enough or that delivery is too
slow (a drop at a time), this can be corrected by adjusting the
grinding adjustment dial (fig. 12).
Please note:
While the machine is making coffee, delivery can be interrupted at any moment by pressing any button.
• At the end of delivery, to increase the quantity of coffee in
the cup, just press and hold (within 3 seconds) one of the
coffee buttons (
or
).
Once the coffee has been made, the appliance is ready to make
the next drink.
•
Please note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
If the coffee is delivered too slowly or
not at all, turn one click clockwise towards “7”.
For fuller bodied creamier coffee on the
other hand, turn one click anticlockwise
towards “1” (do not turn more than one
click at a time otherwise the coffee could
be delivered a drop at a time).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered.
If this adjustment does not obtain the desired result, turn the
dial another click.
•
•
•
Making coffee using pre-ground coffee
•
Tips for a hotter coffee
For a hotter coffee, before delivery you are recommended to:
• perform a rinse cycle by selecting the “Rinsing” function in
the settings menu (page 10)
• warm the cups with hot water (using the hot water
function);
• increase the coffee temperature in the settings menu
(page 11).
•
Making coffee using coffee beans
Important!
Never add pre-ground coffee when the machine is off or it
could spread through the inside of the machine and dirty
it.
This could damage the appliance.
Never use more than 1 level measure or it could dirty the
inside of the coffee maker or block the funnel.
Please note!
If you use pre-ground coffee, you can only make one cup of
coffee at a time.
1. Press the
button (fig. 9) repeatedly until “Preground” is displayed.
2. Open the beans container lid; then open the pre-ground
coffee funnel lid by pushing on PUSH and, once released,
open the lid.
3. Make sure the funnel is not blocked, then add one level
measure of pre-ground coffee (fig. 17).
4. Place a cup under the coffee spouts.
5. Press the 1 cup coffee button
(fig. 11).
Important!
Do not use caramelised or candied coffee beans as they could
stick to the coffee mill and make it unusable.
1.
2.
Please note!
Various alarm messages could be displayed while using
the machine (FILL TANK, EMPTY GROUNDS CONTAINER,
etc.). Their meaning is explained in the section “Displayed
messages” (page 20).
For hotter coffee, see the section “Tips for a hotter coffee”
(page 13).
If the coffee is delivered a drop at a time, too weak and not
creamy enough or too cold, read the tips in the “Troubleshooting” section on page 21.
Place coffee beans in the coffee bean container (fig. 13).
Place under the coffee dispensing spouts, either:
- 1 cup if you want one coffee (fig. 14);
- 2 cups if you want 2 coffees.
13
6. Preparation begins. The amount of coffee selected is displayed together with a progress bar which gradually fills as
preparation progresses.
Please note!
If “Energy saving” mode is enabled, you may have to wait a few
seconds before the first coffee is delivered.
Please note!
To avoid producing milk with poor froth or large bubbles,
always clean the milk container lid and hot water nozzle as
described in the section “Cleaning the milk container” on
pages 14.
1. Remove the lid (fig. 18);
2. Fill the milk container with a sufficient quantity of milk,
not exceeding the MAX level marked on the container (fig.
19). Each mark on the side of the container corresponds to
100 ml of milk.
•
Please note!
For a denser more even froth, you should use skimmed or
partially skimmed milk at refrigerator temperature (about
5°C).
If “energy saving” mode is enabled, you may have to wait a
few seconds before the first cappuccino is delivered.
•
•
3. Make sure the milk intake tube is correctly inserted in the
bottom of the milk container lid (fig. 20).
4. Place the lid back on the milk container.
5. Remove the hot water spout from the nozzle, by pressing
the button.
6. Attach the container to the nozzle and push as far as it will
go (fig. 21). The machine emits a beep (if the beep function
is enabled).
7. Place a sufficiently large cup under the coffee and frothed
milk spouts. Adjust the length of the milk spout. To move it
nearer the cup, simply pull it downwards (fig. 22).
8. Follow the instructions below for each function.
•
Recommended for…
No froth
CAFFELATTE /
MILK (hot milk)
Please note!
If during delivery you want to stop preparation, press the
corresponding button.
At the end of delivery, to increase the quantity of milk or
coffee in the cup, just press and hold (within 3 seconds) the
button corresponding to the drink being made.
Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
Important! Danger of burns
When cleaning the internal tubes of the milk container, a little
hot water and steam leak out of the frothed milk spout.
Avoid contact with splashes of water.
“SET DIAL TO CLEAN” flashes on the display each time you use a
milk function. To eliminate all milk residues, proceed as follows:
1. Leave the milk container in the machine (you do not need
to empty it);
2. Place a cup or other recipient under the frothed milk spout.
3. Turn the froth adjustment dial to “CLEAN” (fig. 23). A progress bar appears and gradually fills as the operation proceeds together with “Cleaning underway”. Cleaning stops
automatically.
4. Turn the dial back to one of the froth selections.
Turn the froth adjustment dial on the milk container lid to adjust
the amount of froth on the milk delivered while making drinks
with milk.
Description
CAPPUCCINO/MILK
(FROTHED MILK)
Cleaning the milk frother with the CLEAN button
Adjusting the amount of froth
Dial
position
Max. froth
The CAFFELATTE, CAPPUCCINO, MACCHIATO and MILK buttons on the control panel enable these drinks to be prepared
automatically.
Proceed as follows:
1. Fill the milk container and attach it as described above.
2. Turn the froth adjustment dial on the milk container lid to
the position corresponding to the required froth.
3. Press the button corresponding to the required drink.
The name of the drink selected is displayed together
with a progress bar which gradually fills as preparation
progresses.
4. After a few seconds, frothed milk is delivered from the
milk spout into the cup below. For drinks with coffee, the
machine automatically makes the coffee after delivering
the milk.
Filling and attaching the milk container
•
MACCHIATO
Making drinks with milk automatically
MAKING DRINKS WITH MILK
•
Min. froth
14
4. The machine delivers 250 ml of hot water, then delivery
stops automatically.
To interrupt delivery of hot water manually, press the
button again.
5. Remove the milk container and always clean the steam
connection nozzle with a sponge (see fig. 39, pag. 18).
•
•
•
Please note!
To prepare a number of cappuccinos or milk based coffees,
clean the milk container after you have prepared the last
drink only.
The milk container can be kept in the refrigerator.
In some cases, to clean you must wait for the appliance to
heat up.
Change the quantity of water delivered
automatically.
The machine is set by default to automatically delivery 250 ml of
hot water. To modify these quantities, proceed as follows:
1. Position a container under the spout.
2. Press the
button again until “Hot water Program
quantity” is displayed, then release the
button.
3. When the hot water in the cup reaches the required level,
button again.
press the
The machine is now reprogrammed with the new quantity.
Programming the quantity of coffee and milk
in the cup for the CAFFELATTE, CAPPUCCINO,
MACCHIATO and MILK buttons
The appliance is set by default to automatically deliver standard
quantities.
To change these quantities, proceed as follows:
1. Place a cup under the coffee and milk spouts.
2. Press and hold the button relative to the milk drink to customize until the message “PROGRAM MILK Program quantity” is displayed.
3. Release the button.
The appliance starts delivering milk.
4. Once the required quantity of milk has been delivered into
the cup, press the button again.
5. The appliance stops delivering milk and after a few seconds
the coffee is delivered into the cup. “PROGRAM COFFEE Program quantity” is displayed.
6. Once the required quantity of coffee has been delivered
into the cup, press the button.
Coffee delivery stops.
The machine is now reprogrammed with the new quantities of
milk and coffee.
Delivering steam
1. Make sure the hot water spout is attached correctly (fig. 6).
2. Fill a container with the liquid to be heated/frothed and
immerse the spout/cappuccino maker in the liquid.
button: after a few seconds, steam comes
3. Press the
out of the cappuccino maker and heats the liquid; “STEAM”
is displayed.
4. When the required temperature is obtained, interrupt
button again.
steam delivery by pressing the
(You should not discharge steam for more than 3 minutes
at a time).
Important!
Always stop steam delivery before extracting the container containing the liquid to avoid burns from splashes.
Tips for using steam to froth milk
•
When choosing the size of the container, bear in mind that
the liquid doubles or triples in volume.
• For a richer denser froth, use skimmed or partially skimmed
milk at refrigerator temperature (about 41°F/5°C).
• For a creamier froth, rotate the container with slow
movements in an upward direction.
• To avoid milk with poor froth or large bubbles, always clean
the spout as described in the following section.
DELIVERING HOT WATER AND STEAM
Important! Danger of burns.
Never leave the machine unsupervised while delivering hot
water or steam.
The spout becomes hot during delivery. Hold by the handle only.
Please note!
If “Energy Saving” mode is enabled, you may have to wait a few
seconds before the hot water or steam is delivered.
Cleaning the spout after use
Delivering hot water
Always clean the spout after use to avoid the build-up of milk
residues and prevent the spout from clogging.
1. Place a container under the cappuccino maker and press
the
button to deliver a little water (fig. 3).
Stop the flow of water by pressing the
button
again.
1. Make sure the hot water spout is attached correctly (fig. 6).
2. Place a container under the spout (as close as possible to
avoid splashes).
3. Press the
button (fig. 3). “Hot water” is displayed,
together with a progress bar which fills gradually as preparation proceeds.
15
Cleaning the drip tray and condensate tray
2. Wait a few minutes for the cappuccino maker to cool down,
then extract the hot water spout.
Hold the spout with one hand by pressing the button and
with the other, turn the cappuccino maker anticlockwise
(fig. 24) and pull it downwards to remove it.
3. Also remove the steam nozzle by pulling it downwards (fig.
25).
4. Check the hole shown by the arrow in fig. 25 is not blocked.
If necessary, clean with a pin.
5. Wash all parts of the cappuccino maker thoroughly with a
sponge and warm water.
6. Reinsert the nozzle and replace the cappuccino maker on
the nozzle, turning it and pushing it upwards until it is
attached.
Important!
The drip tray is fitted with a level indicator (red) showing the
level of water it contains (fig. 27).
Before the indicator protrudes from the cup tray, the drip tray
must be emptied and cleaned, otherwise the water may overflow the edge and damage the appliance, the surface it rests on
or the surrounding area.
To remove the drip tray:
1. Remove the drip tray and the grounds container (fig. 26);
2. Empty the drip tray and grounds container and wash them;
3. Check the red condensate tray and empty if necessary.
4. Replace the drip tray and grounds container.
Cleaning the inside of the coffee maker
CLEANING
•
•
•
Danger of electric shock!
Before cleaning internal parts, the machine must be turned
off (see “Turning off”) and unplugged from the mains power
supply.
Never immerse the coffee maker in water.
Important!
Do not use solvents, abrasive detergents or alcohol to clean
the coffee maker.
With De’Longhi bean to cup coffee makers, you need not
use chemical products to clean the machine.
None of the components can be washed in a dishwasher
apart from the milk container (D).
Do not use metal objects to remove encrustations or coffee
deposits as they could scratch metal or plastic surfaces.
1. Check regularly (about once a month) that the inside of the
appliance (accessible after removing the drip tray) is not
dirty. If necessary, remove coffee deposits with the brush
provided or a sponge.
2. Remove the residues with a vacuum cleaner (fig. 28).
Cleaning the coffee grounds container
Cleaning the water tank
When “EMPTY GROUNDS CONTAINER” is displayed, the grounds
container must be emptied and cleaned.
Until the grounds container has been cleaned, the appliance
continues to display the message and coffee cannot be made.
1. Clean the water tank (A17) regularly (about once a month
and whenever you replace the water softener filter (if
provided) with a damp cloth and a little mild washing up
liquid.
2. Remove the filter (if present) and rinse with running water.
3. Replace the filter (if provided), fill the tank with fresh
water and replace the tank.
Important! Danger of burns
If you make a number of cappuccinos one after the other, the
metal cup tray becomes hot.
Wait for it to cool down before touching it and handle it from
the front only.
Cleaning the coffee spouts
1. Regularly clean the coffee spouts with a sponge or cloth
(fig. 29A).
2. Check the holes in the coffee spout are not blocked. If
necessary, remove coffee deposits with a toothpick (fig.
29B).
To clean (with the machine on):
• Remove the drip tray (fig. 26), empty and clean.
• Empty the grounds container and clean thoroughly to remove all residues left on the bottom. This can be done with
the spatula on the brush provided.
• Check the condensate tray (red) and empty if necessary.
Cleaning the pre-ground coffee funnel
Important!
When removing the drip tray, the grounds container must be
emptied, even if it contains few grounds.
If this is not done, when you make the next coffees, the grounds
container may fill up more than expected and clog the machine.
Check regularly (about once a month) that the pre-ground
coffee funnel (A6) is not blocked. If necessary, remove coffee
deposits with the brush (D2) supplied.
16
Cleaning the infuser
The infuser (A9) must be cleaned at least once a month.
PU
SH
Important!
The infuser may not be extracted when the machine is on.
1. Make sure the machine is correctly turned off (see “Turning
the appliance off” on page 10).
2. Remove the water tank.
3. Open the infuser door (fig. 30) on the right side.
4. Press the two red release buttons inwards and at the same
time pull the infuser outwards (fig. 31).
5. Soak the infuser in water for about 5 minutes, then rinse
under the tap.
35
9. Close the infuser door.
10. Replace the water tank.
Cleaning the milk container
Important!
RINSE WITH WATER ONLY
NO WASHING UP LIQUID - NO DISH WASHER
Clean the infuser without using washing up liquid as it
could be damaged.
6. Use the brush (D2) to remove any coffee residues left in the
infuser housing, visible through the infuser door.
7. After cleaning, replace the infuser by sliding it onto the internal support; then push the PUSH symbol fully in until it
clicks into place (fig. 33).
Clean the milk container every two days as described below:
1. Remove the lid.
2. Remove the milk spout and intake tube.
3. Turn the froth adjustment dial clockwise to the “INSERT”
position (fig. 36) and pull off upwards
infuser
support
33
36
Please note!
If the infuser is difficult to insert, before insertion, adapt it to the
right size by pressing the two levers shown in fig. 34.
Small lever
4. Wash all the components thoroughly with hot water and
mild washing-up liquid. All components are dishwasher
safe, placing them in the top basket of the dishwasher.
Make sure there are no milk residues on the hollow and
groove under the dial (see fig. 37). If necessary, scrape the
groove with a toothpick.
Large lever
34
8. Once inserted, make sure the two red buttons have
snapped out (fig. 35).
37
38
5. Rinse inside the froth adjustment dial seat with running
water (fig. 38).
17
6. Check that the intake tube and spout are not clogged with
milk residues.
7. Replace the dial (in correspondence to the word “INSERT”),
spout and milk intake tube.
8. Place the lid back on the milk container.
9. Press the
button to confirm that you have added
the solution.
The message “Descale underway” is displayed.
The descale programme starts and the descaler liquid
comes out of the water spout.
The descale programme automatically performs a series of
rinses and pauses to remove limescale deposits from inside
the machine.
After about 30 minutes, the message “Rinsing” “INSERT FILTER”
(if present), “FILL TANK” is displayed.
10. The appliance is now ready for rinsing through with clean
water. Extract the water tank, empty, rinse under running
water, fill with clean water up to the MAX level, insert the
filter (if removed previously) and put the water tank back
in the machine. “Rinsing Confirm?” is displayed.
11. Empty the container used to collect the descaler solution
and replace it empty under the cappuccino maker.
12. Press the
button to start rinsing. Hot water flows
out of the spout and the message “Rinsing Please wait” is
displayed.
13. When the water tank is completely empty, the message
“Rinsing complete Confirm?” is displayed.
14. Press the
button.
15. “Heating up Please wait” is displayed, at the end of which
the machine will be ready for use.
Cleaning the hot water/steam nozzle
Each time you prepare milk,
clean the nozzle with a sponge
to remove milk residues from
the gaskets (see fig. 39).
39
DESCALE
Descale the machine when the message “DESCALE” flashes on
the display.
•
•
Important!
Descaler contains acids which may irritate the skin and
eyes. It is vital to respect the manufacturer’s safety warnings given on the descaler pack and the warnings relating
to the procedure to follow in the event of contact with the
skin and eyes.
You should use De’Longhi descaler only. Using unsuitable
descaler and/or performing descaling incorrectly may result in faults not covered by the manufacturer’s guarantee.
SETTING WATER HARDNESS
1. Turn the machine on.
2. Press the MENU/ESC button to enter the menu.
3. Press the MILK or CAPPUCCINO button until “Descale” is
displayed.
4. Select by pressing the
. button: “Descale Confirm?” is displayed. Press
again to enable the
function.
5. The message “Add descaler Confirm?” is displayed, alternating with “EMPTY THE DRIP TRAY” and “REMOVE FILTER”
(if the filter is present).
6. Completely empty the water tank (A17) and remove the
water filter (if present). Empty the drip tray (fig. 26) and
grounds container, then put back in the appliance.
7. Pour the descaler into the tank up to the level A (corresponding to a 3.4 fl oz/100 ml pack) marked on the side of
the tank (fig. 32), then add water (34 fl oz / one litre) up to
level B (fig. 32). replace the water tank.
8. Place an empty container with a minimum capacity of 51 fl
oz / 1.5 litres under the hot water spout (fig. 6).
The DESCALE message is displayed after a period of time according to water hardness.
The machine is factory set for a hardness value of 4.
The machine can also be programmed according to the hardness
of the mains water in the various regions so that the machine
needs to be descaled less often.
Measuring water hardness
1. Remove the “total hardness test” indicator paper attached
to this manual from its pack.
2. Immerse the paper completely in a glass of water for one
second.
3. Remove the paper from the water and shake lightly.
After about a minute, 1, 2, 3, or 4 red squares form, depending on the hardness of the water. each square corresponds to one level.
Important! Danger of burns
Hot water containing acid flows from the spout. Avoid contact
with splashes of water.
18
0,5 L
17 fl oz
41
Setting water hardness
1. Press the MENU/ESC button to enter the menu.
2.Press MILK or CAPPUCCINO to select “Water hardness”.
3. Press the OK button to confirm the selection.
4. Press MILK or CAPPUCCINO and set the hardness level as
measured by the indicator strip (see the fig. in the previous
paragraph).
5. Press the OK button to confirm the setting.
6. Press the MENU/ESC button to exit the menu.
The machine is now reprogrammed with the new water
hardness setting.
42
4. Extract the tank from the appliance and fill with water.
5. Insert the filter in the water tank and immerse it completely for about ten minutes, sloping it to enable the air
bubbles to escape (fig. 42).
6. Insert the filter in the filter housing and press as far as it
will go (fig. 43A)
7. Close the tank with the lid, then put the tank back in the
machine (fig. 43B).
WATER SOFTENER FILTER
Certain models are fitted with a water softener filter. If this is not
the case with your model, you are recommended to purchase
one from De’Longhi Customer Services.
To use the filter correctly, follow the instructions below.
Installing the filter
43A
1. Remove the filter from
the packaging.
2. Turn the date indicator
disk (fig. 40) until the
next two months of use
are displayed.
43B
When you install the filter, you must notify the appliance of its
presence.
8. Press the MENU/ESC button to enter the menu;
8. Press the MILK or CAPPUCCINO button (fig. 8) until “Install filter” is displayed;
button;
10. Press the
11. The message “Enable?” is displayed.
12. Press the
button to confirm the selection. “Hot
water Confirm?” is displayed;
13. Position a container under the hot water spout (min. capacity: 500 ml);
14. Press the
button to confirm the selection. The appliance begins hot water delivery and the message “Please
wait” is displayed;
15. After delivery, the appliance returns automatically to the
“Ready for coffee” position.
The new filter is active. You can now use the coffee maker.
Please note
The filter lasts about two
months if the appliance is used
40 normally. If the coffee machine
is left unused with the filter installed, it will last a maximum of three weeks.
3. To activate the filter, run tap water through the hole in the
filter as shown in the figure until water comes out of the
openings at the side for more than a minute (fig. 41).
19
Replacing the filter
Removing the filter
When “REPLACE FILTER” is displayed, after two months (see date
indicator) or when the appliance has not been used for 3 weeks,
you should replace the filter:
1. Extract the tank and exhausted filter;
2. Take the new filter out of its packet and proceed as
illustrated in points 2, 3, 4, 5 and 6 in the previous section.
3. Position a container with a minimum capacity of 17 fl oz
/500 ml under the hot water spout.
4. Press the MENU/ESC button to enter the menu;
5. Press the MILK or CAPPUCCINO button until “Replace filter “ is displayed.
6. Press the
button;
7. The message “Confirm?” is displayed.
8. Press the
button to confirm the selection;
9. “Hot water… Confirm?” is displayed.
10. Press the
button to confirm the selection. the
appliance begins delivering hot water and the message
“Please wait “ is displayed.
11. After delivery, the appliance returns automatically to the
“ready for coffee” position.
The new filter is now active and you can use the coffee maker.
If you want to continue using the appliance without a filter,
you must remove it and notify the appliance of its removal as
follows:
1. Extract the tank and exhausted filter;
2. Press the MENU/ESC button to enter the menu;
3. Press the MILK or CAPPUCCINO button (fig. 8) until
“Install filter Enabled” is displayed;
4. Press the
button
5. “Disable?” is displayed;
6. Press the
button to confirm and the MENU/ESC
button to exit the menu.
TECHNICAL SPECIFICATION
Voltage: Absorbed power: Pressure: Water tank capacity: Size Lxhxd: Cable length: Weight: Beans container capacity: 120 V~ 60 Hz max. 10A
1250W
15 bar
67.628 fl oz / 2.0 litres max.
238x350x445 mm
1.80 m
11.8 kg
250 g max.
DISPLAYED MESSAGES
DISPLAYED MESSAGE
POSSIBLE CAUSE
SOLUTION
FILL TANK
Insufficient water in the tank.
Fill the tank with water and/or insert it correctly, pushing it as far as it will go until it
clicks into place.
EMPTY GROUNDS
CONTAINER
The grounds container (A22) is full.
Empty the grounds container and drip tray,
clean and replace. Important: when removing
the drip tray, the grounds container must be
emptied, even if it is not completely full.
If this is not done, when you make the next
coffees, the grounds container may fill up more
than expected and clog the machine.
GROUND TOO FINE
ADJUST MILL
The grinding is too fine and the coffee is deli- The grinding is too fine and the coffee is delivevered too slowly or not at all.
red too slowly or not at all.
Repeat coffee delivery and turn the grinding
adjustment dial (fig. 12) one click clockwise towards “7” while the coffee mill is in operation.
If after making at least 2 coffees delivery is
still too slow, repeat the correction procedure,
turning the grinding adjustment dial another
click until delivery is correct (see the section:
“Adjusting the coffee mill” on page 13). If
the problem persists, make sure the water tank
button and
is fully inserted, press the
deliver a little water from the spout.
20
INSERT GROUNDS
CONTAINER
After cleaning, the grounds container has not Remove the drip tray and insert the grounds
been replaced.
container.
ADD PRE-GROUND
COFFEE
With the pre-ground function selected, pre- Place pre-ground coffee in the funnel or deseground coffee has not been poured into the lect the “pre-ground” function (fig. 17).
funnel.
DESCALE
The machine must be descaled.
The descaling procedure described in the section “Descaling” needs to be performed as soon
as possible (page 18).
LESS COFFEE
Too much coffee has been used.
Select a milder taste by pressing the dial
(fig. 9) or reduce the quantity of pre-ground
coffee.
FILL BEANS
CONTAINER
The coffee beans have run out.
Fill the beans container (fig. 13).
The pre-ground coffee funnel is clogged.
Empty the funnel with the help of a brush as
described in the section “Cleaning the preground coffee funnel”.
INSERT INFUSER
ASSEMBLY
The infuser has not been replaced after Insert the infuser as described in the paracleaning.
graph “Cleaning the infuser”.
INSERT TANK
The tank is not correctly in place.
Insert the tank correctly and press as far as it
will go.
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The coffee is not hot
The cups were not preheated.
•
•
Enable the cup warmer, leave the cups at
least 20 minutes to warm up.
Warm the cups by rinsing them with hot
water (N.B. you can use the hot water
function).
The infuser has cooled down because Before making the coffee, warm the infuser by
2/3 minutes have elapsed since the last using the Rinsing function to perform a rinse
coffee was made.
cycle (page 10).
Low coffee temperature is set.
The coffee is thin or not creamy The coffee is ground too coarsely.
enough.
The coffee is unsuitable.
21
In the menu, set a higher coffee temperature.
Turn the grinding adjustment dial one click anticlockwise towards “1” while the coffee mill is
in operation (fig. 12).
Continue one click at a time until coffee delivery is satisfactory. The effect is only visible after
delivering 2 coffees (see the section: “adjusting
the coffee mill” on page 13).
Use pre-ground coffee for espresso coffee
makers
The coffee is delivered too slowly or a The coffee is ground too finely.
drop at a time.
Turn the grinding adjustment dial one click
clockwise towards “7” while the coffee mill is
in operation (fig. 12).
Continue one click at a time until coffee delivery is satisfactory. The effect is only visible after
delivering two coffees. (see the section “adjusting the coffee mill” on page 13).
Coffee does not come out of one of the The spouts are blocked.
spouts.
Clean the spouts with a toothpick (fig. 29B).
The milk does not
The milk container lid is dirty.
come out of the milk
spout.
Clean the milk container lid as described in the
section “Cleaning the milk container”.
The milk contains
large bubbles and
squirts out of the
milk spout or there
is little froth .
Clean the milk container lid as described in the
section “cleaning the milk container”.
the milk container lid is dirty.
the milk is not cold enough or is not Use skimmed or semi-skimmed milk at refrigesemi-skimmed.
rator temperature (about 5° c).
If the result is not as you wished, try changing
brand of milk.
The froth adjustment dial is incorrectly Adjust following the instructions in the section
adjusted.
“making drinks with milk”.
The milk container lid or froth Clean the milk container lid and dial as deadjustment dial is dirty
scribed in the section “cleaning the milk
container”.
The milk contains
large bubbles there
is little froth .
The appliance does not come on.
The hot water/steam nozzle is dirty
Clean the nozzle as described in the section
“cleaning the hot water/steam nozzle”.
The spout is dirty.
Clean as described in the section “Cleaning the
spout after use”.
It is not plugged into the mains socket. Plug into the mains socket.
The main switch (A7) is not turned on.
The infuser cannot be extracted
Place the main switch in the i position (fig. 2).
The appliance has not been turned off Turn the appliance off by pressing the
correctly
button (pag. 10).
22
LIMITED WARRANTY
This warranty applies to all products with De’Longhi or Kenwood brand names.
What does the warranty cover?
We warrant each appliance to be free from defects in material and workmanship. Our obligation under
this warranty is limited to repair at our factory or authorized service center of any defective parts or
part thereof, other than parts damaged in transit. In the event of a products replacement or return, the
unit must be returned transportation prepaid. The repaired or replacement model will be returned at the
company expense.
This warranty shall apply only if the appliance is used in accordance with the factory directions, which
accompany it, and on an Alternating current ( AC ) circuit.
How long does the coverage last?
This warranty runs for two years (2) from the purchase date found on your receipt and applies only to
the original purchaser for use.
What is not covered by the warranty?
The warranty does not cover defects or damage of the appliance, which result from repairs or alterations
to the appliance outside our factory or authorized service centers, nor shall it apply to any appliance,
which has been subject to abuse, misuse, negligence or accidents. Also, consequential and incidental
damage resulting from the use of this product or arising out of any breach of contract or breach of this
warranty are not recoverable under this warranty. Some states do not allow the exclusion or limitation
of incidental or consequential damage, so the above limitation may not apply to you.
How do you get service?
If repairs become necessary, see contact information below:
U.S. Residents: Please contact our toll free hotline at 1-866-528-8323 (1-866-Latte-Best) or log onto
our website at www.delonghi.com
Residents of Canada: Please contact our toll free hotline at 1-888-335-6644 or log onto our website at
www.delonghi.com
Residents of Mexico: Please contact our toll free number 01-800-711-8805 for assistance or log onto
our website at www.delonghi.com
The above warranty is in lieu of all other express warranties and representations. All implied warranties
are limited to the applicable warranty period set forth above. This limitation does not apply if you enter
into an extended warranty with De’Longhi. Some states/countries do not allow limitations on how long
an implied warranty lasts, so the above exclusions may not apply to you. De’Longhi does not authorize
any other person or company to assume for it any liability in connection with the sale or use of its
appliance.
How does country law apply?
This warranty gives you specific legal rights, and you may also have other rights, which vary from state
to state/country to country.
23
Download PDF
Similar pages