Gallet F1 XF
Technical Specifications
th
Rev 6 – February 26 , 2018
Characteristics
Specification
Description
Size Range
Size M : 52-62 cm / Size L : 57-65 cm
Weight (basic configuration)
Size M – 1450 g (+/- 30g) / Size L – 1580g (+/- 30g)
Basic configuration does not include neck curtain, ocular visor and integrated
lighting module. Refer to options section.
Color Range
White, Yellow, Red, Black, Hi-Viz Yellow, Hi-Viz Orange, Grey, Blue, Green,
Photoluminescent, Metalized
Different Comb color available upon request
Shell Material
High Temperature Thermoplastic material, injection molded.
Impact Liner
Shock absorbing polyurethane foam, with over molded aramide reinforcement.
Chinstrap
3 points, adjustable padded chinstrap with quick release buckle
Interior
Flame resistant, padded headband, made of Nomex or Leather.
Adjustable crown straps made of aramide and velcro
Face Shield
Clear or gold coated, Face guard visor.
High Temperature, coated thermoplastic material
Approvals
Specification
Helmet Approvals
Face shield approvals
GALLET F1 XF Technical specifications
Non contractual – Subject to change without notice
Description
CE Marking according to EN443 :2008, EN16471:2015 & EN16473:2015
« Helmets for fire-fighting in buildings and other structures » (EN443),
«Helmets for wildland fire fighting» (EN16471)& «Helmets for technical
rescue» (EN16473)
Type B – Full coverage shell
Including optional requirements :
 C – Resistance to chemicals
 -30°C (***) – Very low temperatures
 3b – Coverage of front area 3b (through face shield)
 E2 – Wet helmet insulation
 E3 – Surface insulation
 MED/ SOLAS (wheelmark) for use on ships, marked on request
CE marking according to EN14458 « High performance visors »
as a Face guard. Including (optional) requirements:
 Use for Fire-fighting
 Resistance to medium energy impact (120 m/s)
 Extremes of temperature to which the visor (mechanism) has been
tested: -30°/+120°C
 K – Resistance to abrasion
 N – Resistance to fogging
 - Electrical properties (Surface insulation)
 UV Filter (according to EN170):
 Gold Coated version – 2C-2.5
 Clear version - 2C-1.2
MSAsafety.com
1
Gallet F1 XF
Technical Specifications
th
Rev 6 – February 26 , 2018
Options and accessories
Options and accessories can be ordered along with the helmet or separately.
Please refer to “Options and accessories technical datasheet” for more information.
Specification
Ocular Visor
Description
Clear or tinted Polycarbonate visor, with adjustable fitting (patented dual
pivot system)
 Tinted version – Sun glare Filter 5-3.1 (according to EN172)
Weight : 100g +/- 10g
CE marking according to EN14458 « High performance visors » tested as
an Eye-guard, for General Use.
Including optional requirements:
K – Resistance to Abrasion
 - Electrical properties (Surface insulation)
T – Resistance to medium energy impact (120 m/s) at
Extremes of Temperatures (-5°/ +55°C)
Visor (mechanism) tested at -30°/+120°C
Neck curtains
 Aluminized 3 layers, fiber glass reinforced material (100g)
 Impregnated Nomex, dual layer material (65g)
 Wool / Nomex material (80g)
 Integral, Wool / Nomex (230g)
Attachment with 4 rear and 4 front clips
Integrated lighting module
4 LED
3x AAA batteries (disposable or rechargeable)
Polycarbonate housing with on/off switch
Weight = 100g +/- 10g
CE Approval according to ATEX directive.
ATEX approval
2G Ga Ex ia IIC T4/T3 (disposable / rechargeable batteries)
IP56
ATEX approval valid only with batteries listed in instructions.
External Helmet mounted lamps
GALLET F1 XF Technical specifications
Non contractual – Subject to change without notice
Range of helmet mounted lamps for use with Gallet helmets.
Optional Lamp bracket with multiple angular positions and anti-ejection
design
Selection of available lamps:

XPS
LED, 3 AA disposable batteries

XP LED
LED, 4 AA disposable batteries

XS
LED, 4 LR44 cells batteries

AS-R
LED, rechargeable Li-Ion battery
Please refer to individual specifications documents for more information.
MSAsafety.com
2
Gallet F1 XF
Technical Specifications
th
Rev 6 – February 26 , 2018
Attachment of face pieces
Face pieces of breathing apparatus equipped with special brackets can be directly
attached to the Gallet F1 XF fire helmet which for this purpose comes with an
adjustable mask adapter (“kitfix”) located on the helmet shell.
Customization
Front plates can be fully customized to allow a unique design and a perfect
corporate look:
High quality reflectants enhance visibility and are available in the following standard
colours. Reflectants are applied in the factory and can be customized with texts or
logos e.g. to identify functions and ranks.
Please consult us for a proposal to your individual request.
3
GALLET F1 XF Technical specifications
Non contractual – Subject to change without notice
MSAsafety.com
Download PDF
Similar pages