Model No.
TH-42LF30ER
TH-47LF30ER
Operating Instructions
FULL HD LCD Display
h
English
Please read these instructions before operating your set
and retain them for future reference.
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of
enjoyment from your new LCD Display.
To obtain maximum benefit from your set, please read these Instructions before making
any adjustments, and retain them for future reference.
Retain your purchase receipt also, and note down the model number and serial number of
your set in the space provided on the rear cover of these instructions.
Visit our Panasonic Web Site
http://panasonic.net
Table of Contents
Important Safety Notice ........................................... 3
Safety Precautions ................................................... 4
Accessories .............................................................. 7
Accessories Supply ................................................. 7
Remote Control Batteries ........................................ 7
Connections .............................................................. 8
AC cord connection and ¿xing ................................. 8
Video equipment connection ................................... 8
VIDEO, COMPONENT / RGB IN
and HDMI connection .............................................. 9
DVI-D IN, DVI-D OUT connection ......................... 10
PC Input Terminals connection ...............................11
SERIAL Terminals connection ............................... 12
Power On / Off......................................................... 14
Selecting the input signal ...................................... 16
Basic Controls ........................................................ 17
ASPECT Controls ................................................... 19
Digital Zoom ............................................................ 20
On-Screen Menu Displays ..................................... 21
Adjusting Pos. /Size ............................................... 22
Picture Adjustments ............................................... 24
Advanced settings ................................................. 25
Sound Adjustment .................................................. 26
SDI Sound Output ................................................. 26
PRESENT TIME Setup / Set up TIMER .................. 27
PRESENT TIME Setup.......................................... 27
Set up TIMER ........................................................ 28
Screensaver (For preventing image retention) .... 29
Setup of Screensaver Time ................................... 30
Wobbling ................................................................. 30
No activity power off .............................................. 31
ECO Mode settings................................................. 32
Customizing the Input labels................................. 33
Selecting the On-Screen Menu Language............ 34
Customizing the On-Screen Menu Display .......... 34
Setup for MULTI DISPLAY ...................................... 35
How to Setup MULTI DISPLAY ............................. 35
ID Remote Control Function .................................. 36
Setup for Input Signals .......................................... 37
Component / RGB-in select ................................... 37
YUV / RGB-in select .............................................. 37
Signal menu .......................................................... 38
3D Y/C Filter .......................................................... 38
Colour system ....................................................... 39
Cinema reality ....................................................... 39
XGA Mode ............................................................. 39
Noise reduction ..................................................... 40
Sync ...................................................................... 40
HDMI Range .......................................................... 40
Input signal display ................................................ 41
Options Adjustments ............................................. 42
Troubleshooting ..................................................... 45
Applicable Input Signals ........................................ 46
Shipping condition ................................................. 48
Speci¿cations ......................................................... 49
Trademark Credits
• VGA is a trademark of International Business Machines Corporation.
• Macintosh is a registered trademark of Apple Inc., USA.
• SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.
• HDMI, the HDMI Logo, and High-De¿nition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
Note:
Image retention may occur. If you display a still picture for an extended period, the image might remain on the screen.
However, it will disappear after a while.
2
Important Safety Notice
WARNING
1) To prevent damage which may result in ¿re or shock hazard, do not expose this appliance to dripping
or splashing.
Do not place containers with water (Àower vase, cups, cosmetics, etc.) above the set. (including on
shelves above, etc.)
No naked Àame sources, such as lighted candles, should be placed on / above the set.
2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to quali¿ed
service personnel.
3) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin earthing-type
power plug. This plug will only ¿t an earthing-type power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the earthing plug.
4) To prevent electric shock, ensure the earthing pin on the AC cord power plug is securely connected.
CAUTION
This appliance is intended for use in environments which are relatively free of electromagnetic ¿elds.
Using this appliance near sources of strong electromagnetic ¿elds or where electrical noise may overlap with the
input signals could cause the picture and sound to wobble or cause interference such as noise to appear.
To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic ¿elds.
IMPORTANT: THE MOULDED PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This display is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is
¿tted in this plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 10
amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
ASA
or the BSI mark
on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is re¿tted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic dealer.
Do not cut off the mains plug.
Do not use any other type of mains lead except the one supplied with this display.
The supplied mains lead and moulded plug are designed to be used with this display to avoid
interference and for your safety.
If the socket outlet in your home is not suitable, get it changed by a quali¿ed electrician.
If the plug or mains lead becomes damaged, purchase a replacement from an authorized dealer.
WARNING : — THIS DISPLAY MUST BE EARTHED.
How to replace the fuse. Open the fuse compartment with a screwdriver and replace the fuse.
3
Safety Precautions
WARNING
Setup
This LCD Display is for use only with the following optional accessories. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Panasonic Corporation.)
• Pedestal ....................................................... TY-ST20-K
• HD-SDI Terminal Board with audio .............. TY-FB10HD
Always be sure to ask a quali¿ed technician to carry out set-up.
Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard
unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from
being played with by young children, creating the potential risk of suffocation.
Do not place the Display on sloped or unstable surfaces, and ensure that the Display does not hang over the
edge of the base.
• The Display may fall off or tip over.
Do not place any objects on top of the Display.
• If water is spills onto the Display or foreign objects get inside it, a short-circuit may occur which could result in ¿re
or electric shock. If any foreign objects get inside the Display, please consult your local Panasonic dealer.
Transport only in upright position!
• Transporting the unit with its display panel facing upright or downward may cause damage to the internal
circuitry.
Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table
cloths and curtains.
For suf¿cient ventilation;
Leave a space of 10 cm or more at the top, left and right, and 5 cm or more at the rear, and also keep the space
between the bottom of the display and the Àoor surface.
Cautions for Wall Installation
• Wall installation should be performed by an installation professional. Installing the Display incorrectly may lead to
an accident that results in death or serious injury. Furthermore, when installing on a wall, a wall hanging bracket
that conforms to VESA standards (VESA 400 × 400) must be used.
• When installing the Display vertically, be sure to install the power indicator onto the bottom of the Display.
4
Safety Precautions
When using the LCD Display
The Display is designed to operate on 220 - 240 V AC, 50/60 Hz.
Do not cover the ventilation holes.
• Doing so may cause the Display to overheat, which can cause ¿re or damage to the Display.
Do not stick any foreign objects into the Display.
• Do not insert any metal or Àammable objects into the ventilations holes or drop them onto the Display, as doing so
can cause ¿re or electric shock.
Do not remove the cover or modify it in any way.
• High voltages which can cause severe electric shocks are present inside the Display. For any inspection, adjustment
and repair work, please contact your local Panasonic dealer.
Ensure that the mains plug is easily accessible.
An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.
Do not use any power supply cord other than that provided with this unit.
• Doing so may cause ¿re or electric shocks.
Securely insert the power supply plug as far as it will go.
• If the plug is not fully inserted, heat may be generated which could cause ¿re. If the plug is damaged or the wall
socket is loose, they shall not be used.
Do not handle the power supply plug with wet hands.
• Doing so may cause electric shocks.
Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug body, not the cable.
• Do not damage the cable, make any modi¿cations to it, place heavy objects on top of it, heat it, place it near any
hot objects, twist it, bend it excessively or pull it. To do so may cause ¿re and electric shock. If the power cable is
damaged, have it repaired at your local Panasonic dealer.
If the Display is not going to be used for any prolonged length of time, unplug the power supply plug from
the wall outlet.
To prevent the spread of ¿re, keep candles or other open Àames away from this product at all times.
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out
from the Display, immediately unplug the power supply plug from the wall outlet.
• If you continue to use the Display in this condition, ¿re or electric shock could result. After checking that the smoke
has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing the Display
yourself is extremely dangerous, and shall never be done.
If water or foreign objects get inside the Display, if the Display is dropped, or if the cabinet becomes damages,
disconnect the power supply plug immediately.
• A short circuit may occur, which could cause ¿re. Contact your local Panasonic dealer for any repairs that need to be made.
5
Safety Precautions
CAUTION
When using the LCD Display
Do not bring your hands, face or objects close to the ventilation holes of the Display.
• Heated air comes out from the ventilation holes at the top of Display will be hot. Do not bring your hands or face,
or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.
Be sure to disconnect all cables before moving the Display.
• If the Display is moved while some of the cables are still connected, the cables may become damaged, and ¿re or
electric shock could result.
Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any
cleaning.
• Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it becoming dusty.
• If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in ¿re.
Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.
Do not burn or breakup batteries.
• Batteries must not be exposed to excessive heat such as sunshine, ¿re or the like.
Cleaning and maintenance
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning
cloth or a soft, lint-free cloth.
• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in
which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until
the surface is dry.
• Do not scratch or hit the surface of the panel with ¿ngernails or other hard objects, otherwise the surface may
become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner,
otherwise the quality of the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been
added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.
• Do not allow any detergent to come into direct contact with the surface of the Display. If water droplets get inside
the unit, operating problems may result.
• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the
cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods
in contact with articles made from rubber or PVC.
Usage of a chemical cloth
• Do not use a chemical cloth for the panel surface.
• Follow the instructions for the chemical cloth to use it for the cabinet.
6
Accessories
Accessories Supply
Check that you have the accessories and items shown
Operating Instruction book
CD-ROM
(Operating
instructions)
Remote Control
Transmitter
N2QAYB000691
Batteries for the Remote
Control Transmitter
(R6 (UM3) Size × 2)
Power supply cord
Remote Control Batteries
Requires two R6 batteries.
1. Pull and hold the hook, then open
the battery cover.
2. Insert batteries - note correct
polarity ( + and -).
3. Replace the cover.
“R6 (UM3)” size
+
+
-
Helpful Hint:
For frequent remote control users, replace old batteries with Alkaline
batteries for longer life.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precaution:
1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when remote control acts sporadically or stops operating the Display set.
6. Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, ¿re or the like.
7
Connections
AC cord connection and ¿xing
AC cord ¿xing
Unplug the AC cord
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet ¿rst.
Video equipment connection
AUDIO IN (COMPOSITE)
Connect the audio output of a device connected
to VIDEO.
(see page 9)
AV IN
HDMI1, HDMI2
HDMI Input Terminal
(see page 9)
SERIAL IN, SERIAL OUT
SERIAL Input/Output
Terminal
Control the Display by
connecting to PC.
(see page 12)
8
AUDIO IN
(COMPONENT / RGB)
Connect the audio output
of a device connected to
COMPONENT/RGB IN.
(see page 9)
DVI-D IN, DVI-D OUT
DVI-D Input/Output
Terminal
(see page 10)
PC IN
PC Input Terminal
(see page 11)
AUDIO IN (DVI-D / PC)
Connect the audio
output of a device
connected to DVI-D IN,
PC IN. (see page 10, 11)
VIDEO
Composite Video
Input Terminal
(see page 9)
COMPONENT/RGB IN
Component/RGB
Video Input Terminal
(see page 9)
Connections
VIDEO, COMPONENT / RGB IN and HDMI connection
Note:
Additional equipment, cables and adapter plugs shown are not supplied with this set.
[Pin assignments and signal names for HDMI terminal]
Pin No.
DVD Player
VCR
AUDIO OUT
L
3
4
R
5
6
7
8
9
10
11
Signal Name
T.M.D.S Clock
Shield
12
T.M.D.S Clock-
13
CEC
14
Reserved
(N.C. on device)
15
16
17
18
19
SCL
SDA
DDC/CEC
Ground
+5V Power
Hot Plug Detect
3 1
19
RCA-BNC
Adapter plug
Pin No.
T.M.D.S Data2
Shield
T.M.D.S Data2T.M.D.S Data1+
T.M.D.S Data1
Shield
T.M.D.S Data1T.M.D.S Data0+
T.M.D.S Data0
Shield
T.M.D.S Data0T.M.D.S Clock+
2
VIDEO OUT
Signal Name
T.M.D.S Data2+
1
4 2
18
RCA-BNC
Adapter plug
HDMI cables
Notes:
• Change the “Component/RGB-in
select” setting in the “Setup” menu
to “Component” (when Component
signal connection) or “RGB” (when
RGB signal connection). (see page
37)
• Accepts only RGB signals from
COMPONENT/RGB IN terminal
with “Sync on G”.
HDMI
AV OUT
DVD player
L
HDMI
AV OUT
DVD player
Y PB PR OUT
R
AUDIO OUT
Computer
RGB OUT
RGB Camcorder
DVD Player
9
Connections
DVI-D IN, DVI-D OUT connection
PC with DVI-D
video out
Stereo mini plug (M3)
Shared with
PC IN.
DVI-video cable with Ferrite core (Within 5 m)
Daisy chain connection
When using the multi display, multiple LCD Displays can be daisy chained.
First LCD Display
PC with DVI-D
video out
*
Second LCD Display
Third and
subsequent
LCD
Displays
*
* DVI-video cable with Ferrite core
Notes:
• Up to 10 displays can be connected with a daisy chain, but the number of the connected displays may be limited by
a cable, signal or equipment to use.
• HDCP can be supported for up to 8 displays for a daisy chain.
DVI-D Input/Output Connector
Pin Layouts
1
8
9
16
17
24
Connection port view
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
Signal Name
T.M.D.S. data 2T.M.D.S. data 2+
T.M.D.S. data 2 shield
DDC clock
DDC data
T.M.D.S. data 1T.M.D.S. data 1+
T.M.D.S. data 1 shield
Pin No.
13
14
15
16
17
18
19
20
21
22
23
24
Signal Name
+5 V DC
Ground
Hot plug detect
T.M.D.S. data 0T.M.D.S. data 0+
T.M.D.S. data 0 shield
T.M.D.S. clock shield
T.M.D.S. clock+
T.M.D.S. clock-
Notes:
• Additional equipment and cables shown are not supplied with this set.
• Use the DVI-D cable with Ferrite core complying with the DVI standard. Image deterioration may occur depending
on the length or the quality of the cable.
10
Connections
PC Input Terminals connection
(Female)
COMPUTER
Shared with DVI-D IN.
Audio
Stereo mini plug (M3)
Connect a cable which matches
the audio output terminal on the computer.
Conversion adapter
(if necessary)
RGB
PC cable with
Ferrite core
Mini D-sub 15p
(Male)
Notes:
• Computer signals which can be input are those with a horizontal scanning frequency of 30 to 110 kHz and vertical scanning
frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
• The display resolution is a maximum of 1,440 × 1,080 dots when the aspect mode is set to “4:3”, and 1,920 × 1,080
dots when the aspect mode is set to “16:9”. If the display resolution exceeds these maximums, it may not be possible
to show ¿ne detail with suf¿cient clarity.
• The PC input terminals are DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will
need to make setting changes to the computer at the time of connection.
• Some PC models cannot be connected to the set.
• There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.
• The computer shown in the illustration is for example purposes only.
• Additional equipment and cables shown are not supplied with this set.
• Panasonic recommends using a PC cable that includes a Ferrite core.
• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the speci¿ed
frequency range.
Signal Names for Mini D-sub 15P Connector
5
4
10 9
3
2
8
1
7
6
15 14 13 12 11
Pin Layout for PC Input
Terminal
Pin No.
Signal Name
Pin No.
Signal Name
Pin No.
Signal Name
1
R
6
GND (Ground)
11
NC (not connected)
2
G
7
GND (Ground)
12
SDA
3
B
8
GND (Ground)
13
HD/SYNC
4
NC (not connected)
9
+5 V DC
14
VD
5
GND (Ground)
10
GND (Ground)
15
SCL
11
Connections
SERIAL Terminals connection
The SERIAL terminal is used when the Display is controlled by a computer.
COMPUTER
RS-232C Straight cable
(Female)
(Male)
D-sub 9p
In addition, a particular LCD Display can be controlled with a PC while several LCD Displays are daisy chained.
COMPUTER
First LCD Display
Second LCD Display
(Male)
(Male)
(Female)
(Female) (Female)
(Female) (Female)
Third LCD Display
*
*
*
(Male)
D-sub 9p
* RS-232C Straight cable
Notes:
• Use the RS-232C straight cable to connect the computer
to the Display.
• The computer shown is for example purposes only.
• Additional equipment and cables shown are not supplied
with this set.
• When using daisy chain, set ”Serial Daisy Chain” in the
Options menu. (see page 43)
• For daisy chain connection, use a straight cable connected
to pins numbered 2 through 8 .
1
2
6
3
7
4
8
5
9
Pin layout for SERIAL Terminal
The SERIAL terminal conforms to the RS-232C interface speci¿cation, so that the Display can be controlled by a
computer which is connected to this terminal.
The computer will require software which allows the sending and receiving of control data which satis¿es the conditions
given below. Use a computer application such as programming language software. Refer to the documentation for
the computer application for details.
Communication parameters
Signal level
Synchronization method
Baud rate
Parity
Character length
Stop bit
Flow control
RS-232C compliant
Asynchronous
9600 bps
None
8 bits
1 bit
-
Signal names for SERIAL IN terminal
Pin No.
2
3
4
5
6
7
8
1 • 9
Details
RXD
TXD
DTR
GND
DSR
(Shorted in this set)
NC
These signal names are those of computer speci¿cations.
12
Connections
Basic format for control data
The transmission of control data from the computer
starts with a STX signal, followed by the command, the
parameters, and lastly an ETX signal in that order. If there
are no parameters, then the parameter signal does not
need to be sent.
STX
C1 C2 C3
Start
(02h)
:
P1 P2 P3 P4 P5
ETX
Colon
Parameter(s)
(1 - 5 bytes)
3-character
command (3 bytes)
End
(03h)
Notes:
• If multiple commands are transmitted, be sure to wait for
the response for the ¿rst command to come from this unit
before sending the next command.
• If an incorrect command is sent by mistake, this unit will
send an “ER401” command back to the computer.
• Consult an Authorized Service Center for detail instructions
on command usage.
Command
Command
PON
POF
AVL
AMT
IMS
DAM
Parameter
None
None
***
0
1
None
SL1
AV1
AV2
HM1
HM2
DV1
PC1
None
ZOOM
FULL
NORM
ZOM2
Control details
Power ON
Power OFF
Volume 000 - 100
Audio MUTE OFF
Audio MUTE ON
Input select (toggle)
SLOT input (SLOT INPUT)
VIDEO input (VIDEO)
COMPONENT/RGB IN input
(Component)
HDMI1 input (HDMI1)
HDMI2 input (HDMI2)
DVI-D IN input (DVI)
PC IN input (PC)
Screen mode select (toggle)
Zoom1
16:9
4:3
Zoom2
With the power off, this display responds to PON command
only.
13
Power On / Off
Connecting the AC cord plug to the Display.
Connecting the plug to the Wall Outlet
Notes:
• Main plug types vary between countries. The power
plug shown at right may, therefore, not be the type
¿tted to your set.
• When disconnecting the AC cord, be absolutely
sure to disconnect the AC cord plug at the socket
outlet ¿rst.
Power switch
Press the Power switch on the Display to turn the
set on: Power-On.
Remote Control Sensor
Power Indicator
Power Indicator: Green
Press the
button on the remote control to turn the Display off.
Power Indicator: Red (standby)
Press the
button on the remote control to turn the Display on.
Power Indicator: Green
Turn the power to the Display off by pressing the
the Display is on or in standby mode.
switch on the unit, when
Note:
During operation of the power management function, the power indicator turns
orange in the power off state.
14
Power On / Off
When ¿rst switching on the unit
Following screen will be displayed when the unit is turned on for the ¿rst time.
Select the items with the remote control. Unit buttons are invalid.
OSD Language
English (UK)
OSD Language
Deutsch
Français
1
Select the language.
Italiano
Español
2
ENGLISH (US)
Set.
PRESENT TIME Setup
1
Select “DAY” or “PRESENT TIME”.
2
Setup “DAY” or “PRESENT TIME”.
PRESENT TIME Setup
PRESENT TIME
1
Select “Set”.
Set.
MON
99 : 99
DAY
PRESENT TIME
PRESENT TIME Setup
PRESENT TIME
2
MON 99 : 99
Set
MON 99 : 99
Set
DAY
PRESENT TIME
TUE
10 : 00
Notes:
• Once the items are set, the screens won't be displayed when switching on the unit next time.
• After the setting, the items can be changed in the following menus.
OSD Language (see page 34)
PRESENT TIME Setup (see page 27)
Power ON warning message
The following message may be displayed when turning the unit power ON:
No activity power off Precautions
’No activity power off’ is enabled.
If “No activity power off” in Setup menu is set to “Enable”, a warning message is displayed every time
the power is turned ON. (see page 31)
This message display can be set with the following menu: Options menu
Power On Message (see page 44)
15
Selecting the input signal
Press to select the input signal to be played back from the equipment which has
been connected to the Display.
Input signals will change as follows:
HDMI1
HDMI2
VIDEO
Component*
PC
DVI
HDMI1: HDMI input terminal in AV IN (HDMI1).
HDMI2: HDMI input terminal in AV IN (HDMI2).
VIDEO: Video input terminal in VIDEO.
Component*: Component or RGB input terminal in COMPONENT/RGB IN.
PC: PC input terminal in PC IN.
DVI: DVI input terminal in DVI-D IN.
* “Component” may be displayed as “RGB” depending on the setting of
“Component/RGB-in select”. (see page 37)
When an optional Terminal Board is installed:
HDMI1
HDMI2
SLOT INPUT
VIDEO
Component
SLOT INPUT: Input terminal in Terminal Board
Note:
When a Terminal Board incompatible with the Display is installed,
“Non-Compatible Function Board” is displayed.
Notes:
• Selecting is also possible by pressing the INPUT button on the
unit.
• Select to match the signals from the source connected to the
component/RGB input terminals. (see page 37)
16
PC
DVI
Basic Controls
Main Unit
Remote control
Brightness Sensor
sensor
Detects the brightness in the viewing
environment.
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit
will still consume some power
as long as the power cord is still
inserted into the wall outlet.)
• Standby ........ Red
Orange (When “Slot power” is
set to “On”. See page 43)
Orange (Depending on the type
of the function board installed,
when the power is supplied to
the slot)
• Power-ON ...... Green
• PC Power management (DPMS)
......................... Orange (With PC input signal.
See page 32)
• DVI-D Power management
....................... Orange (With DVI input signal.
See page 32)
SLOT: Terminal board (optional accessories) insert slot
(see page 4 )
Note:
The upper side slot is for terminal board with 2-slot width.
The terminal board with 1-slot width does not function when
installed in the upper side slot.
Speakers
Enter / Aspect button
(see page 19, 21)
Volume Adjustment
Volume Up “+” Down “–”
When the menu screen is displayed:
“+” : press to move the cursor up
“–” : press to move the cursor down
(see page 21)
Main Power On / Off Switch
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen
will switch. (see page 21)
Normal Viewing
Picture
Setup
Sound
Pos. /Size
INPUT button
(INPUT signal selection)
(see page 16)
17
Basic Controls
Remote Control Transmitter
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 19)
Standby (ON / OFF) button
The Display must ¿rst be plugged into
the wall outlet and turned on at the
power switch (see page 14).
Press this button to turn the Display On,
from Standby mode. Press it again to
turn the Display Off to Standby mode.
POS. /SIZE button
(see page 22)
PICTURE button
(see page 24)
Sound mute On / Off
Press this button to mute the
sound.
Press again to reactivate sound.
Sound is also reactivated when
power is turned off or volume level
is changed.
N button
(see page 23, 24, 25, 26)
POSITION buttons
INPUT button
Press to select Input signal
sequentially. (see page 16)
ECO MODE (ECO)
Press to change the ECO MODE
setup status. (see page 32)
FUNCTION buttons (FUNCTION)
(see page 44)
OFF TIMER button
The Display can be preset to switch to stand-by
after a ¿xed period. The setting changes to 30
minutes, 60 minutes, 90 minutes and 0 minutes
(off timer cancelled) each time the button is
pressed.
30 min
60 min
90 min
0 min
When three minutes remain, “Off timer 3 min”
will Àash.
The off timer is cancelled if a power interruption
occurs.
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 22)
SET UP button (see page 21)
SOUND button (see page 26)
Volume Adjustment
Press the Volume Up “+” or Down “–”
button to increase or decrease the
sound volume level.
R button (see page 21)
Press the R button to return to
previous menu screen.
RECALL button
Press the “RECALL” button to display
the current system status.
1 Input label
2 Aspect mode (see page 19)
3 Off timer
The off timer indicator is
displayed only when the off
timer has been set.
4 Clock Display (see page 44)
1
2
PC
4:3
4
10:00
Off timer
90min
Digital Zoom (see page 20)
18
3
ASPECT Controls
The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format
picture.
Note:
Be aware that if you put the display in a public place for commercial purposes or a public showing
and then use the aspect mode select function to shrink or expand the picture, you may be violating
the copyright under copyright law. It is prohibited to show or alter the copyrighted materials of other
people for commercial purposes without the prior permission of the copyright holder.
Press repeatedly to move through the aspect options:
4:3
Zoom1
Zoom2
16:9
[from the unit]
The aspect mode changes each time the ENTER button is pressed.
Note:
The aspect mode is memorized separately for each input terminal.
Aspect mode
16:9
Picture
Enlarged screen
Description
The display of the pictures ¿lls the screen.
In the case of SD signals, pictures with a 4:3 aspect ratio are
enlarged horizontally, and displayed. This mode is suited to
displaying anamorphic pictures with a 16:9 aspect ratio.
Pictures with a 4:3 aspect ratio are displayed with their
original aspect ratio. Side panels are displayed at the left
and right edges of the screen.
4:3
Zoom1
Zoom2
The pictures with a 4:3 aspect ratio among the 16:9 aspect
ratio signals are displayed with their original aspect ratio.
The left and right edges of the pictures are masked with
side panels.
Letterbox pictures with a 16:9 aspect ratio are enlarged
vertically and horizontally so that their display ¿lls the screen.
The top and bottom edges of the pictures are cut off.
Letterbox pictures with a 16:9 aspect ratio are enlarged
vertically and horizontally so that their display ¿lls the screen.
The top and bottom edges as well as the left and right edges
of the pictures are cut off.
19
Digital Zoom
This displays an enlargement of the designated part of the displayed image.
1
Display the operation guide.
Exit
Press to access Digital Zoom.
The operation guide will be displayed.
1
During Digital Zoom, only the following buttons can be operated.
[Remote control]
POSITION /
ACTION button
2
Select the area of the image to be enlarged.
Press on the enlargement location to select.
The cursor will move.
Exit
2
3
Select the magni¿cation required for the enlarged display.
Each time this is pressed, the magni¿cation factor changes.
This is shown in the image being displayed.
×1
4
×2
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
• When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
• The Digital Zoom function cannot be selected while in the following operation state:
When MULTI DISPLAY Setup is On (see page 35).
When Screensaver is running (see page 29)
• While Digital Zoom is in operation, “Adjusting Pos. / Size” cannot be used.
20
×3
×4
On-Screen Menu Displays
Remote Control
Unit
1 Display the menu screen.
Press to select.
(Example: Picture menu)
2 Select the item.
Select.
Picture
Normalise
Press several times.
Each time the MENU button is pressed, the
menu screen will switch.
Normal Viewing
Picture
Setup
Sound
Pos. /Size
Press.
Normal
Picture Mode
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
White balance
Advanced settings
Normal
100
70
50
50
50
50
Select.
Normal
(Example: Picture menu)
3 Set.
Adjust.
Press.
Adjust.
4 Exit the menu.
Press.
Press several times.
Press
to return to the
previous menu.
Menu display list
Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.
Picture menu
Setup menu
Picture
Normalise
Pos./Size menu
Setup
Normal
Picture Mode
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
White balance
Advanced settings
Normal
100
70
50
50
50
50
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
Component/RGB-in select
1/2
Normalise
Auto Setup
Off
RGB
Normal
No activity power off
OSD Language
Disable
English(UK)
See page 24, 25
Setup
MULTI DISPLAY Setup
Set up TIMER
PRESENT TIME Setup
Menu Display Duration
Menu Transparency
20
2/2
Sound menu
Pos. /Size
H-Pos
H-Size
V-Pos
V-Size
Clock Phase
Dot Clock
1:1 Pixel Mode
1/2
Sound
Normalise
Normal
Sound Mode
Bass
Treble
Balance
Surround
0
0
0
0
0
0
See page 22, 23
Normal
Off
SDI Sound Output
Left Channel
Right Channel
Sound Out
Level Meter
Normal
0
0
0
Off
2/2
Channel 1
Channel 1
Off
Off
See page 26
15 S
See page 27-41
21
Adjusting Pos. /Size
1
Press to display the Pos. /Size menu.
2
Press to select the menu to adjust.
3
Press to adjust the menu.
4
Press to exit from adjust mode.
Pos. /Size
Normalise
Auto Setup
H-Pos
H-Size
V-Pos
V-Size
Clock Phase
Dot Clock
1:1 Pixel Mode
Normal
0
0
0
0
0
0
Off
Notes:
Unadjustable items are grayed
out.
Adjustable items differ depending
on the input signal and the display
mode.
Note:
If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture
position movement cannot be controlled by the Picture Pos./Size function.
Auto Setup H-Pos/V-Pos, H-Size/V-Size, Dot Clock and Clock Phase are automatically adjusted when the RGB or
PC signal is received.
This setting only operates when a PC signal or RGB signal is input, and the aspect is “16:9”.
Using Remote Control
When
on the remote control is pressed, “Auto Setup” will be executed.
When Auto Setup does not work, “Invalid” is displayed.
Notes:
• Auto Setup may not work when a cropped or dark image is input. In such case, switch to a bright
image with borders and other objects are clearly shown, and then try auto setup again.
• Depending on the signal, out of alignment may occur after Auto Setup. Carry out ¿ne tuning for the
position/size as required.
• If Auto Setup cannot set properly for vertical frequency 60Hz XGA signal (1024×768@60Hz and
1366×768@60Hz), pre-selecting the individual signal in “XGA Mode” (see page 39) may results in
correct Auto Setup.
• Auto Setup does not work well when a signal such as additional information is superimposed out of
valid image period or intervals between synchronizing and image signals are short.
• If Auto Setup cannot adjust correctly, select “Normalise” once and press ACTION ( ), then adjust
Pos. /Size manually.
• If the picture goes off screen in the horizontal direction as a result of performing Auto Setup, perform
Dot Clock adjustment.
22
Adjusting POS. /SIZE
H-Pos
Adjust the horizontal position.
V-Pos
Adjust the vertical position.
H-Size
Adjust the horizontal size.
V-Size
Adjust the vertical size.
Clock
Phase
(During Component, RGB and PC input signal)
Eliminate the Àickering and distortion.
Dot Clock
(During Component, RGB and PC input signal)
Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens,
adjust so that any such noise is minimized.
Over scan Turn image over scan On/Off.
Con¿gurable signals are as follows:
525i, 525p, 625i, 625p, 750/60p, 750/50p (Component Video, DVI, HDMI)
On
Off
Notes:
• “Off” is effective during only “16:9” aspect mode.
• When “Off” is set, “H-Size” and “V-Size” cannot be adjusted.
1:1 Pixel
Mode
Adjusts the display size when 1125i or 1125p signal is input.
Notes:
• “On” is effective during only “16:9” aspect mode.
• Select On when you would like to replay 1920 × 1080 input signal.
• Applicable input signal;
1125 (1080) / 50i · 60i · 24sF · 24p · 25p · 30p · 50p · 60p
• Select Off when Àickering is shown around the image.
• H-Size and V-Size cannot be adjusted when On is selected.
Off
Helpful Hint (
On
/
Normalise
Normalisation)
While the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is
pressed during “Normalise”, then all adjustment values (except “Clock Phase” and “Dot Clock”) are returned to the factory settings.
23
Picture Adjustments
1
Press to display the Picture menu.
2
Select to adjust each item.
Press to select the menu to adjust.
Select the desired level by looking at the picture behind the menu.
Note:
Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input
and menu setting.
Picture
Normalise
Press “ ” or “ ” button to switch between modes.
Normal
Normal
Normal
Picture Mode
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
White balance
Advanced settings
Dynamic
Cinema
100
70
50
50
50
50
Normal
For viewing in standard (evening lighting)
environments.
This menu selects the normal levels of Brightness
and Contrast.
Normal
Dynamic
For viewing in brighter environments.
This menu selects higher than normal levels of
Brightness and Contrast.
Press to enter
Advanced settings .
Cinema
Ideal for movies.
Advanced settings
Enables ¿ne picture adjustment at a professional
level (see next page).
Advanced settings
Normalise
Note:
If you would like to change the picture and colour
of the selected Picture menu to something else,
adjust using the items in the Picture menu. (see
next page)
Normal
Input level
Gamma
AGC
W/B High R
W/B High G
W/B High B
W/B Low R
W/B Low G
W/B Low B
Helpful Hint (
0
2.2
Off
Press “ ” or “ ” button to switch between modes.
50
50
50
50
50
50
Normal
/
Normalise
Warm
Cool
Normalisation)
While the “Picture” menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
24
Picture Adjustments
Item
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Effect
Darker
Adjustments
Brighter
Adjusts luminance of the back
light.
More
Selects the proper brightness
and density for the room.
Less
Darker
Brighter
Less
More
Reddish
Greenish
Less
More
Adjusts for easier viewing of
dark pictures such as night
scenes and black hair.
Adjusts colour saturation.
Adjusts for nice skin colour.
Notes:
• “Colour” setting can be adjusted for Video
input signal.
• You can change the level of each function
(Backlight, Contrast, Brightness, Colour, Tint,
Sharpness) for each Picture Mode.
• The setting details for normal, dynamic
and cinema respectively are memorized
separately for each input terminal.
• The “Tint” setting can be adjusted for NTSC
signal only during Video input signal.
• “Backlight” can be adjusted when “ECO
Mode” is set to “Custom” and “Power save”
to “Off”. (see page 32)
Adjusts picture sharpness.
Advanced settings
Item
Input level
Effect
Details
Less
More
Down
Up
Off
On
W/B High
R
Less
More
W/B High
G
Less
More
W/B High
B
Less
More
Less
More
Less
More
Less
More
Gamma
AGC
W/B Low R
W/B Low G
W/B Low B
Adjustment of parts which are extremely bright and hard to see.
S Curve
2.0
2.2
2.6
Increases the brightness of dark signal automatically.
Adjusts the white balance for light red areas.
Adjusts the white balance for light green areas.
Adjusts the white balance for light blue areas.
Adjusts the white balance for dark red areas.
Adjusts the white balance for dark green areas.
Adjusts the white balance for dark blue areas.
Notes:
• Carry out “W/B” adjustment as follows.
1. Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.
2. Adjust the white balance of the dark sections using the “W/B Low R”, “W/B Low G” and “W/B Low B” settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
Helpful Hint (
/
Normalise
Normalisation)
On the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any time or
the ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
25
Sound Adjustment
1
Normalise
2
1/2
Sound
Press to display the Sound menu.
Sound Mode
Bass
Treble
Balance
Surround
Select to adjust each item.
Press to select the menu to adjust.
Normal
Normal
0
0
0
Off
Select the desired level by listening to the sound.
3
Press to exit from adjust mode.
Item
Sound Mode
Details
Normal: Emits the original sound.
Dynamic: Accentuates sharp sound.
Clear:
Attenuates human voice.
Bass
Adjusts low pitch sounds.
Treble
Adjusts high pitch sounds.
Balance
Surround
Adjusts left and right volumes.
Select On or Off.
Note: Bass, Treble and Surround settings are memorized separately for each Sound Mode.
Helpful Hint (
/
Normalise
Normalisation)
While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
SDI Sound Output
This menu is available only when selecting a slot that the following terminal board is installed:
HD-SDI Terminal Board with audio (TY-FB10HD)
SDI Sound Output
Left Channel
Right Channel
Sound Out
Level Meter
26
2/2
Channel 1
Channel 1
Off
Off
Item
Left Channel
Right Channel
Details
Channel 1 to Channel 16
Selects left audio channel.
Channel 1 to Channel 16
Selects right audio channel.
Off
Enables audio output.
Disables audio output.
Sound Out
On
On:
Off:
Level Meter
1-8ch
9-16ch
Off
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4 channels
each on both right and left sides of the display.
Off: Hides the audio level meter.
1-8ch: Displays the audio level meter (1-8ch)
9-16ch: Displays the audio level meter (9-16ch)
PRESENT TIME Setup / Set up TIMER
The timer can switch the Display On or Off.
Before attempting Timer Set, con¿rm the PRESENT TIME and adjust if necessary.
Then set POWER ON Time / POWER OFF Time.
1
2
Press to display the Setup menu.
Press to select Set up TIMER or PRESENT TIME Setup.
Press to display the Set up TIMER screen or
PRESENT TIME Setup screen.
Setup
MULTI DISPLAY Setup
Set up TIMER
PRESENT TIME Setup
Menu Display Duration
Menu Transparency
20
2/2
15 S
PRESENT TIME Setup
1
2
Press to select DAY or PRESENT TIME.
PRESENT TIME Setup
PRESENT TIME MON 99 : 99
Press to setup DAY or PRESENT TIME.
Set
button: Forward
MON
DAY
button: Back
99 : 99
PRESENT TIME
Notes:
• Pressing “ ” or “ ” button once changes PRESENT TIME 1 minute.
• Pressing “ ” or “ ” button continuously changes PRESENT TIME by 15 minutes.
Press to select Set.
Press to store PRESENT TIME Setup.
Notes:
• Set cannot be selected unless PRESENT TIME is set.
• Unless setting the present time other than “99:99”, “DAY” and “PRESENT TIME”
can not be set.
• The settings of “DAY” and “PRESENT TIME” are reset when leaving the display
turned off for about 7 days for the following reasons:
switch of the unit to turn off the display.
Pressing
Disconnecting the AC cord.
Interruption of power supply.
27
PRESENT TIME Setup / Setup TIMER
Set up TIMER
Set the program for turning the power On/Off and select the input signal at the speci¿ed time. Up to 20 programs can be set.
[Setting Example]
Program 1, Every Monday, 12:00, Power On, Input: VIDEO
Set up TIMER
PRESENT TIME MON 0 : 03
1
Program
On
Timer Function
MON
Day
Power Mode
Power On
Time
12 : 00
Input
VIDEO
1
Set the program number.
2
To execute the program, set to “On”.
The program is disabled when “Off” is set.
3
Set the day.
The program is executed every day when “Everyday” is set.
1 select
4
Set the power On/Off.
2 adjust
5
Set the time.
Pressing “ ” or “ ” button once changes “Time” 1 minute.
Pressing “ ” or “ ” button continuously changes “Time” by
15 minutes.
6
Set the input.
Notes:
• This function cannot be set unless “PRESENT TIME Setup” is set.
• If more than one programs are set for the same time, only the program with the smallest program number is enabled.
28
Screensaver (For preventing image retention)
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
When the screen saver is operating, the following 5 patterns are displayed full screen for 5 seconds each.
BlackĺDark GrayĺGrayĺLight GrayĺWhite
1
Press to display the Setup menu.
Press to select Screensaver.
2
Press to display Screensaver screen.
Setup
1/2
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
Component/RGB-in select
Off
RGB
No activity power off
OSD Language
Disable
English(UK)
Screensaver
PRESENT TIME
MON 0 : 02
Start
Mode
3
Mode selection
Press to select Mode.
Press to select each
mode items.
4
Off
Start setting
Off
Interval
: Operates when Periodic Time and Operating
Time are setup and those times arrive.
Time Designation : Operates when Start Time and Finish Time
are setup and those times arrive.
Standby after SCR Saver: Operates while Screensaver duration, and
display enters standby mode.
On
: Operates when Start is selected and the
ACTION ( ) button is pressed.
When the Mode is set to On, press to select Start.
Press to start Screensaver.
The menu screen will disappear and the Screensaver will be activated. To stop the
Screensaver under On, press the R button or any buttons on the main unit.
Note: When the display is turned off, the Scrensaver will be deactivated.
29
Screensaver (For preventing image retention)
Setup of Screensaver Time
After selecting Time Designation, Interval or Standby after SCR Saver, the relevant Time Setup will become available
for selection and the Operating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.)
Press to select Start Time / Finish Time
(When Time Designation is selected).
Press to select Periodic Time / Operating Time
(When Interval is selected).
Press to select Screensaver duration
(When Standby after SCR Saver is selected).
Press to setup.
button: Forward
button: Back
Notes:
• Pressing “ ” or “ ” button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing “ ” or “ ” button continuously changes the Time by 15 minutes.
• “Screensaver duration” of the “Standby after SCR Saver” can be set from 0:00 to
23:59. When this is set to “0:00”, “ Standby after SCR Saver” will not be activated.
Screensaver
PRESENT TIME MON 15 : 00
Start
Time Designation
Mode
6 : 15
Start Time
12 : 30
Finish Time
Screensaver
PRESENT TIME MON 15 : 00
Start
Interval
Mode
12 : 00
Periodic Time
3 : 00
Operating Time
Screensaver
PRESENT TIME MON 15 : 00
Start
Standby after SCR Saver
Mode
6 : 15
Screensaver duration
Note: Timer function will not work unless “PRESENT TIME” is set.
Wobbling
Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour
of image.
1
2
Press to display the Setup menu.
Press to select “Wobbling”.
Press to select “On” or “Off”.
On: Shifts the position of the display image on a ¿xed time
interval.
Setup
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
Component/RGB-in select
1/2
Off
RGB
No activity power off
3
Press to exit from adjust mode.
Notes:
• If “MULTI DISPLAY Setup” is set to “On”, this function does not operate.
• When this function is operating, part of the screen may appear to be missing.
30
OSD Language
Disable
English(UK)
No activity power off
1
Press to select the menu to adjust.
Setup
1/2
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
Component/RGB-in select
Off
RGB
2
3
Press to select “Enable” or “Disable”.
No activity power off
OSD Language
Disable
English(UK)
Press to exit from Setup.
When this function is set to “Enable”, the power is turned off (standby) automatically when there is no operation of
the Display for 4 hours.
Starting from 3 minutes before the turn off, the remaining time will be displayed.
Press any key to abort.
No activity power off 3min
When the power is turned off due to this function, a message “Last turn off due to ’No activity power off’.” is
displayed next time the power is turned on.
Note:
During the screensaver is running, this function is disabled.
31
ECO Mode settings
Setup
1/2
ECO Mode settings
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
Component/RGB-in select
ECO Mode
2 adjust
No Signal power off
Disable
Off
PC Power management
RGB
No activity power off
OSD Language
1 select
Custom
Disable
English(UK)
Off
DVI-D Power management
Off
Off
Power save
ECO Mode
Custom: The menu of power consumption reduction is individually set.
On: The following ¿xed values are set to the menu of power consumption reduction. Individual setting is not available.
No Signal power off: Enable
PC Power management: On
DVI-D Power management: On
Power save: Sensor
Using Remote Control
When
is pressed, the “ECO Mode” setting
ECO Mode
On
changes.
Custom settings
The menu of the power consumption reduction is individually set. This setting is enabled when “ECO Mode” is set
to “Custom”.
No signal power off
Equipment power supply is turned Off when there is no signal.
When this is set to “Enable”, the power supply of the unit goes Off 10 minutes after the input signals stop.
Note:
This function is effective during normal viewing (one picture screen).
PC Power management
When this function is set to On, it operates under the following conditions to turn the power on or off automatically.
When no pictures are detected for 30 or so seconds during PC signal input:
ĺ Power is turned off (standby); the power indicator lights up orange.
When pictures are subsequently detected:
ĺ Power is turned on; the power indicator lights up green.
Notes:
• This function operates only during input from PC IN terminal.
• This function is effective when “Sync” is set to “Auto” and during normal viewing (one picture screen).
DVI-D Power management
When this function is set to On, it operates under the following conditions to turn the power on or off automatically.
When no pictures (sync signal) are detected for 30 or so seconds during DVI signal input:
ĺ Power is turned off (standby); the power indicator lights up orange.
When pictures (sync signal) are subsequently detected:
ĺ Power is turned on; the power indicator lights up green.
Note:
This function operates only during DVI signal input.
Power save
This function adjusts the brightness of the backlight to reduce power consumption.
Off: This function does not operate.
On: Backlight brightness is reduced.
Sensor: The backlight brightness is automatically adjusted according to the viewing environment.
Note:
When this function is set to “On” or “Sensor”, the “Backlight” setting in the Picture menu is disabled.
32
Customizing the Input labels
This function can change the label of the Input signal to be displayed. (see page 16)
1
2
Setup
Press to display the Setup menu.
Press to select Input label.
Press to display the Input label screen.
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
Component/RGB-in select
1/2
Off
RGB
No activity power off
OSD Language
3
Disable
English(UK)
Press to select image input.
Press to change input label.
Input label
SLOT INPUT
VIDEO
Component
PC
DVI
HDMI1
HDMI2
Image input
[SLOT INPUT]*1
[VIDEO]
[Component]*2
[PC]
[DVI]
[HDMI1]
[HDMI2]
SLOT INPUT
VIDEO
Component
PC
DVI
HDMI1
HDMI2
Input label
SLOT INPUT / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)
VIDEO / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)
Component / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)
PC / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)
DVI / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)
HDMI1 / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)
HDMI2 / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)
(Skip): The INPUT button press will skip its input.
*1 “SLOT INPUT” is displayed when a Terminal Board is installed.
*2 “Component” may be displayed as “RGB” depending on the setting of “Component/RGB-in select”. (see page 37)
33
Selecting the On-Screen Menu Language
1
2
Press to display the Setup menu.
Press to select the OSD Language.
Press to select your preferred language.
Selectable languages
English (UK)
Deutsch
Français
Italiano
Español
Setup
1/2
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
Component/RGB-in select
Off
RGB
No activity power off
OSD Language
Disable
English(UK)
English (US)
......(Chinese)
.......(Japanese)
Ɋɭɫɫɤɢɣ.......(Russian)
Customizing the On-Screen Menu Display
Set the display time and background transparency of the on-screen menu display.
1
2
Press to display the Setup menu.
Press to select “Menu Display Duration”.
Press to adjust the display duration.
3
Press to select “Menu Transparency”.
Press to adjust the transparency.
4
34
Press to exit from adjust mode.
Setup
MULTI DISPLAY Setup
Set up TIMER
PRESENT TIME Setup
Menu Display Duration
Menu Transparency
20
2/2
15 S
Setup for MULTI DISPLAY
By lining up the Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across
all screens.
For this mode of operation, each display has to be set up with a Display number to determine its location.
(Example)
group of 4 (2 × 2) group of 9 (3 × 3)
group of 16 (4 × 4)
group of 25 (5 × 5)
How to Setup MULTI DISPLAY
1
Setup
Press to display the Setup menu.
Press to select the MULTI DISPLAY Setup.
2
Press to display the “MULTI DISPLAY Setup” menu.
Press to select the MULTI DISPLAY Setup.
3
Press to select “On” or “Off”.
Item
MULTI DISPLAY Setup
Horizontal Scale
Vertical Scale
2/2
MULTI DISPLAY Setup
Set up TIMER
PRESENT TIME Setup
Menu Display Duration
Menu Transparency
20
15 S
MULTI DISPLAY Setup
MULTI DISPLAY Setup
Horizontal Scale
Vertical Scale
Bezel H Adjustment
Bezel V Adjustment
Location
Off
1
1
10
10
A1
Details
Select “On” or “Off”.
Select “1”, “2”, “3”, “4”, “5”.
Select “1”, “2”, “3”, “4”, “5”.
Areas of the image that are hidden by the joint sections are adjusted both horizontally and
vertically (0~100).
To show joints between displays.
To hide joints between displays.
Suitable for still image display.
Suitable for moving image display.
Setting value: 0
Setting value: 100
Bezel H Adjustment
Bezel V Adjustment
35
Setup for MULTI DISPLAY
Item
Details
Select the required arrangement number. (A1-E5 : Refer to the following)
Display Number locations for each arrangement.
(Examples)
( 2 × 1) ( 2 × 3 )
(4×2)
(4×4)
(5×5)
Location
4
A1
A2
A3
A4
B1
B2
B3
B4
A5
B5
C1
C2
C3
C4
C5
D1
D2
D3
D4
D5
E1
E2
E3
E4
E5
Press to exit from Setup.
ID Remote Control Function
You can set the remote control ID when you want to use this remote control on one of several different displays.
Note:
To operate this function, please purchase ID remote controller sold separately.
Object model : EUR7636090R
1
Switch
to
2
Press the
button on the remote control.
3
Press one of
-
,
for the tens digit setting.
4
Press one of
-
,
for the units digit setting.
on the right side.
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the ¿rst two numbers become the ID number for the remote
control.
ID remote control button operation
The operation is the same as normal remote control except for the
button.
ID Cancellation
Press
button on remote control. (This has the same effect as pressing the
,
,
buttons at the same time.)
Notes:
• Set the Remote ID “On” to operate the ID remote control.
If Remote ID is set to “On”, you can use the remote control without identical ID number during option menu display.
(see page 43)
• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is
not the same as the ID select number (see page 43).
36
Setup for Input Signals
Component / RGB-in select
Select to match the signals from the source connected to the COMPONENT/RGB IN terminal.
Y, PB, PR signals
“Component”
“RGB”
RGB signals
1
2
Press to display the Setup menu.
Press to select the “Component / RGB-in select”.
Press to select the desired input signal.
RGB
Component
Setup
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
Component/RGB-in select
1/2
Off
RGB
No activity power off
3
OSD Language
Disable
English(UK)
Press to exit from adjust mode.
Note:
Make setting of the selected input terminal (COMPONENT/RGB IN).
YUV / RGB-in select
Select to match the signals from the source connected to DVI-D IN terminal.
YUV signals
“YUV”
RGB signals
“RGB”
1
2
Press to display the Setup menu.
Press to select the “YUV / RGB-in select”.
Press to select the desired mode.
YUV
RGB
Setup
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
YUV/RGB-in select
1/2
Off
RGB
No activity power off
3
OSD Language
Disable
English(UK)
Press to exit from adjust mode.
37
Setup for Input Signals
Signal menu
Note:
“Signal” setup menu displays a different setting condition for each input signal.
Setup
1
2
1/2
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
Component/RGB-in select
Press to display the Setup menu.
Press to select the “Signal”.
Off
RGB
No activity power off
3
Press to select the menu to adjust.
Press ACTION ( ) button
Press to adjust the menu.
For Video
For RGB
[ AV ]
Signal
4
Disable
English(UK)
OSD Language
Press to display the Signal menu.
Press to exit from adjust mode.
On
Auto
Off
Off
3D Y/C Filter
Colour system
Cinema reality
Noise reduction
[ RGB ]
Signal
Sync
Cinema reality
XGA Mode
Noise reduction
H-Freq.
V-Freq.
Signal Format
For Component
Off
1024×768
Off
Cinema reality
XGA Mode
Noise reduction
H-Freq.
V-Freq.
Signal Format
63.98
63.98 kHz
60.02 Hz
1280×1024/60
For Digital
[ Component ]
Signal
Auto
Off
1024×768
Off
Cinema reality
Noise reduction
HDMI Range
H-Freq.
kHz
60.02 Hz
1280×1024/60
[ Digital ]
Signal
V-Freq.
Dot Clock Freq.
Signal Format
Off
Off
Auto
63.98
kHz
60.02 Hz
108.0 MHz
1280×1024/60
3D Y/C Filter
Select “Signal” from the “Setup” menu during Video input signal. (“Signal [AV]” menu is displayed.)
Press to select the “3D Y/C Filter”
Press to set On / Off.
38
3D Y/C Filter
On
Setup for Input Signals
Colour system
Select Signal from the “Setup” menu during Video input signal. (“Signal [AV]” menu is displayed.)
Press to select the “Colour system”.
Press to select each functions.
[ AV ]
Signal
3D Y/C Filter
Colour system
Cinema reality
Noise reduction
On
Auto
Off
Off
If the picture image becomes unstable:
With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases
become unstable. Should this occur, set the system to match the format of the input signal.
Colour system: Set the colour system to match the input signal. When “Auto” is set, Colour system will be
automatically selected from NTSC/PAL/SECAM/NTSC 4.43/PAL M/PAL N.
To display PAL60 signal, select “Auto”.
Auto
SECAM
NTSC
PAL M
PAL N
PAL
NTSC 4.43
Cinema reality
Cinema reality:
When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which
are recorded at 24 frames per second. If the picture is not stable, turn the setting to off.
Note:
When On, this setting only affects the following signal input:
• NTSC / PAL signal input during Video input signal.
• 525i (480i), 625i (575i), 1125 (1080) / 60i signal input during Component input signal.
Press to select Cinema reality.
Cinema reality
Off
Press to set On / Off.
XGA Mode
This menu is displayed when the input signal is analog (Component/PC). This menu sets two types of XGA signals
with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz and
1,366 × 768 @ 60Hz).
When a 1,280 x 768 @ 60Hz input signal is automatically detected, the image is processed as a 1,280 x 768 @
60Hz XGA input signal irrespective of this setting.
Press to select “XGA Mode”.
y
XGA Mode
1024 × 768
Press to select “1024×768”, “1366×768”.
Note:
After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos. /Size” menu as
necessary. (see page 22)
39
Setup for Input Signals
Noise reduction
Press to select “Noise reduction”.
Noise reduction
Off
Press to select “Off”, “Auto”, “Min”, “Mid”, “Max”.
Auto: Noise reduction will be automatically selected from “Min”,
“Mid” or “Max”.
Note:
Noise reduction can be adjusted while a Video or Component signal is being applied.
Sync
This function operates only during input from PC IN terminal.
Press to select the “Sync”.
Signal
[ RGB ]
Press to adjust.
Sync
Cinema reality
XGA Mode
Auto
Off
1024×768
Con¿rm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
However, the synchronized signal that is input ¿rst is selected.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
Note:
Accepts only RGB signals from COMPONENT/RGB IN terminal with “Sync on G”
HDMI Range
Switches the dynamic range according to the input signal from HDMI terminal.
Press to select “HDMI Range”.
Press to select “Video(16-235)”, “Full(0-255)”, “Auto”.
Signal
Cinema reality
Noise reduction
HDMI Range
[ Digital ]
Off
Off
Auto
Video(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD player
Full(0-255): If the input signal is full range, Example: HDMI terminal output for personal computer
Auto: Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.
Note:
This function can be set only for HDMI signal input.
40
Setup for Input Signals
Input signal display
Displays the frequency and the type of the current input signal.
This display is valid only for Component / RGB / PC and Digital input signal.
Display range:
Horizontal 30 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital signal input.
Note:
The automatically detected signal format may be displayed differently than the
actual input signal.
H-Freq.
V-Freq.
Signal Format
H-Freq.
V-Freq.
Dot Clock Freq.
Signal Format
63.98 kHz
60.02 Hz
1280×1024/60
63.98
kHz
60.02 Hz
108.0 MHz
1280×1024/60
41
Options Adjustments
1
Options
Press to display the Setup menu.
On screen display
Initial input
Failover input
Initial VOL level
Maximum VOL level
Input lock
Button lock
Remocon User level
Press to select “OSD Language”.
2
Press for more than 3 seconds.
Press to select “Options”.
3
Options
Shipping
Press to select your preferred menu.
4
Press to adjust the menu.
5
On screen display
Initial input
Failover input
42
0
Off
Off
Off
2/3
Enable
Normal
0
Off
Off
--Off
3/3
Adjustments
was pressed.
Adjusts the input signal when the unit is turned on.
Off
SLOT INPUT*
VIDEO
Component/RGB
PC
DVI
HDMI1
HDMI2
* “SLOT INPUT” is displayed when an optional Terminal Board is installed.
Notes:
• Only the adjusted signal is displayed. (see page 16)
• This menu is available only when “Input lock” is “Off”.
When there is no signal, the speci¿ed input signal is automatically switched to.
Off
SLOT INPUT*
VIDEO
Component/RGB
PC
DVI
HDMI1
HDMI2
* “SLOT INPUT” is displayed when an optional Terminal Board is installed.
Notes:
• When other than “Off” is set, “Input lock” will be grayed out and cannot be set.
• When “Input lock” is set to other than “Off”, this setting will be grayed out and cannot be set.
Off
Off
button to adjust the volume when the unit is turned on.
On
Off
Off: Sets normal volume.
On: Sets your preferred volume.
Notes:
• When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.
Press
Maximum VOL level
0
Off
Off
Slot power
Off
Power ON Screen Delay
Clock Display
Off
Power On Message (No activity power off)
On
Function button assign 1
Signal
Function button assign 2
Screensaver
On: Displays all the following on screen.
• Power on display
• Input signal switch display
• No signal display
• Mute and the remaining time of off-timer after
Off: Hides all the items above from view.
Press
Initial VOL level
Off
Options
Press to exit from Options menu.
Item
On
Off
Off
Options
Off-timer function
Initial Power Mode
ID select
Remote ID
Serial ID
Serial Daisy Chain
Studio W/B
Press to display the Options menu.
1/3
button to adjust the maximum volume.
On
Off
Off: Sets auto maximum volume.
On: Sets your preferred maximum volume.
Notes:
• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically
becomes the same as the “Maximum VOL level”.
• The volume display can go up to 100 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.
Options Adjustments
Item
Input lock
Adjustments
Locks the input switch operation.
Off
SLOT INPUT*
VIDEO
Component/RGB
PC
DVI
HDMI1
* “SLOT INPUT” is displayed when an optional Terminal Board is installed.
Notes:
• Only the adjusted signal is displayed (see page 16).
• Input switch can be used when this is set to “Off”.
HDMI2
Off
On
MENU&ENTER
Off
Off: All the buttons on main unit can be used.
MENU&ENTER: Locks
Button lock
MENU
and
ENTER/
buttons on main unit.
On: Locks all the button on main unit.
Sets Button lock with the unit buttons in the following procedure.
four timesĺPress four timesĺPress
Off: Press four timesĺPress
MENU&ENTER: Press
four timesĺPress four timesĺPress
four timesĺPress
On: Press four timesĺPress
four timesĺPress four timesĺPress
ENTER/
INPUT
ENTER/
INPUT
ENTER/
Remocon User level
ENTER/
ENTER/
Off
User1
User2
User3
Off: You can use all of the buttons on the remote control.
, , , ,
buttons on the remote control.
User1: You can only use
User2: You can only use
button on the remote control.
User3: Locks all the buttons on remote control.
Off-timer function
Initial Power Mode
ID select
Remote ID
Serial ID
Serial Daisy Chain
Enable: Enables the “Off-timer function”.
Disable: Disables the “Off-timer function”.
Note: When “Disable” is set, the Off-timer is cancelled.
On
Standby
Normal
Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.
Normal: Power returns in as the same state as before the power interruption.
Standby: Power returns in standby mode. (Power Indicator : red/orange)
On:
Power returns in power On. (Power Indicator : green)
Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.
Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.
Set value range: 0 - 100
(Standard value: 0)
The setting of this menu is valid only when using ID remote control.
Off: Disables ID remote control functions. You can use normal remote control operations.
On: Enable ID remote control functions.
Note: To use the ID remote control function, it is necessary to set each ID number of remote control and
display unit. About the setting method, please refer to “ID Remote Control Function” (see page
36) and “ID select” (above-mentioned).
Sets the panel ID Control.
Off: Disables external control by the ID.
On: Enables the external control by the ID.
Sets the top and end of a daisy chain when the SERIAL terminal of Display is daisy chained.
---: When the Display is under SERIAL control on a standalone basis, or if not at the top or end of daisy
chain.
Top: To connect to the top of daisy chain.
End: To connect to the end of daisy chain.
Studio W/B
Off: Nullify all the settings adjusted.
On: Sets the colour temperature for TV studio.
Note: Valid only when the “Warm” is set as “White balance” in Picture menu.
Slot power
Off
Auto
On
Off: Power is not transmitted to the slot power.
Auto: Power is transmitted to the slot power only when main power is on.
On: Power is transmitted to the slot power when main power is on or in the standby state.
Note: In some cases, power is transmitted to the slot power when main power is on or in the standby
state regardless of the slot power setting.
43
Options Adjustments
Item
Adjustments
Power ON Screen
Delay
1
2
3....
30
Off
You can set the power-on delay time of the displays to reduce the power load, when you press
to
turn on the multiple displays that are set together, for example, on MULTI DISPLAY system.
Set each display’s setting individually.
Off:
The display will be turned on at the same time as
is pressed.
1 to 30 (sec.): Set the power-on delay time (second).
After pressing
, the display will be powered on with time delay depending on this setting.
Notes:
• During this function is working, the power indicator is blinking green.
• This function also works when the power recovers from failure or after plugging off and in again the
power cord.
Off: Not display the clock.
On: Display the clock.
The clock is displayed at the lower left of the screen when
Clock Display
button is pressed.
Note: When “PRESENT TIME Setup” is not set, the clock is not displayed even
if “Clock Display” is “On”. (see page 27)
10:00
Power On Message
(No activity power
off)
Whether to show/hide No activity power off Precautions at the time of power ON is set.
On: The warning precautions are shown at the time of power ON.
Off: The warning precautions are not shown at the time of power ON.
Note: This setting is enabled only if “No activity power off” is “Enable” (see page 31).
Set the functions that operates when
is pressed.
Signal: The “Signal” menu is displayed.
Screensaver: The “Screensaver” menu is displayed.
ECO menu: The “ECO Mode settings” menu is displayed.
Set up TIMER: The “Set up TIMER” menu is displayed.
Note:
Factory settings are as follows.
FUNCTION1 button: Signal
Function button assign 1 FUNCTION2 button: Screensaver
Function button assign 2 Use the FUNCTION button
The menu screen is displayed. (Example: Signal)
[ AV ]
Signal
3D Y/C Filter
Colour system
Cinema reality
Noise reduction
On
Auto
Off
Off
Press the FUNCTION button to exit from the menu.
Normalisation
When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or
“Remote ID” adjustments, set all the values “Off” so that all the buttons are enabled again.
button on the remote control and hold for more than 5 seconds. The
Press the button on main unit together with
“Shipping” menu is displayed and the lock is released when it disappears.
44
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Picture
Sound
Interference
Noisy Sound
Normal Picture
No Sound
No Picture
No Sound
No Picture
Normal Sound
No Colour
Normal Sound
No remote control operations can be performed.
A cracking sound is sometimes heard from the unit.
The top or bottom of the picture on the screen is cut
off when I use the zoom function.
Areas at the top and bottom of the screen where
the image is missing appear when I use the zoom
function.
I can hear sounds coming from inside the unit.
Checks
Electrical Appliances
Cars / Motorcycles
Fluorescent light
Volume
(Check whether the mute function has been activated on the remote control.)
Not plugged into AC outlet
Not switched on
Picture and Brightness/Volume setting
(Check by pressing the power switch or stand-by button on the remote control.)
If a signal with a non-applicable colour system format, or frequency is input, only
the input terminal indication is displayed.
Colour controls set at minimum level
(see page 24, 25)
Colour system (see page 39)
Check whether the batteries have discharged completely and, if they have not,
whether they were inserted properly.
Check whether the remote control sensor is exposed to an outdoor light or a
strong Àuorescent light.
Check whether the remote control designed speci¿cally for use with the unit is
being used. (The unit cannot be operated by any other remote control.)
If there is nothing wrong with the picture or sound, this is the sound of the cabinet
undergoing very slight contractions in response to changes in the room temperature.
There are no adverse effects on the performance or other aspects.
Adjust the position of the picture on the screen.
When using a video software program (such as a cinema size program) with a
screen wider than one in the 16:9 mode, blank areas separate from the images
are formed at the top and bottom of the screen.
When the power is turned on, a sound of the display panel being driven may be
heard: This is normal and not indicative of malfunctioning.
Parts of the unit become hot.
Even when the temperature of parts of the front, top and rear panels has risen,
these temperature rises will not pose any problems in terms of performance or
quality.
Power automatically turns off unexpectedly.
Check the settings of “No signal power off”, “PC Power management”, “DVI-D
Power management” and “No activity power off”. Any of them may be set to “On
(Enable)”. (see page 31, 32)
This LCD Display uses special image processing. Hence a slight time lag may occur between image and audio, depending on the type
of input signal. However, this is not a malfunction.
LCD Display panel
Symptoms
The screen darkens slightly
when bright pictures with minimal
movements are shown.
It takes a while for the picture
to appear.
The edges of the images Àicker.
There may be red spots, blue
spots, green spots and black
spots on the screen.
Check
The screen will darken slightly when photos, still images of a computer or other pictures with minimal
movements are shown for an extended period. This is done to reduce image retention on the screen
and the shortening of the screen’s service life: It is normal and not indicative of malfunctioning.
The unit digitally processes the various signals in order to reproduce esthetically pleasing images. As
such, it sometimes takes a few moments for the picture to appear when the power has been turned
on, when the input has been switched.
Due to the characteristics of the system used to drive the panel, the edges may appear to Àicker in
the fast-moving parts of the images: This is normal and not indicative of malfunctioning.
This is a characteristic of liquid crystal panels and is not a problem. The liquid crystal panel is built
with very high precision technology giving you ¿ne picture details. Occasionally, a few non-active
pixels may appear on the screen as ¿xed points of red, blue, green, or black. Please note this does
not affect the performance of your LCD.
Image retention may occur. If you display a still picture for an extended period, the image might remain
on the screen. However, it will disappear after a while. This is not considered as malfunction.
Image retention appears
45
Applicable Input Signals
PC signals
*Mark: Applicable input signal
Horizontal
Vertical
RGB IN
PC IN
DVI-D IN
HDMI1
frequency (kHz) frequency (Hz) (Dot clock (MHz)) (Dot clock (MHz)) (Dot clock (MHz)) HDMI2
640x400@70Hz
31.46
70.07
* (25.17)
* (25.17)
* (25.17)
640x400@85Hz
37.86
85.08
* (31.5)
* (31.5)
* (31.5)
640x480@60Hz
31.43
59.88
* (25.15)
* (25.15)
* (25.15)
640x480@60Hz
31.47
59.94
* (25.18)
* (25.18)
* (25.18)
*
640x480@67Hz
35.00
66.67
* (30.24)
* (30.24)
* (30.24)
640x480@72Hz
37.86
72.81
* (31.5)
* (31.5)
* (31.5)
640x480@75Hz
37.50
75.00
* (31.5)
* (31.5)
* (31.5)
640x480@85Hz
43.27
85.01
* (36.0)
* (36.0)
* (36.0)
720x400@70Hz
31.47
70.08
* (28.32)
* (28.32)
* (28.32)
800x600@55Hz
34.50
55.38
* (35.33)
* (35.33)
* (35.33)
800x600@56Hz
35.16
56.25
* (36.0)
* (36.0)
* (36.0)
800x600@60Hz
37.88
60.32
* (40.0)
* (40.0)
* (40.0)
*
800x600@60Hz
38.00
60.51
* (40.13)
* (40.13)
* (40.13)
800x600@72Hz
48.08
72.19
* (50.0)
* (50.0)
* (50.0)
800x600@75Hz
46.88
75.00
* (49.5)
* (49.5)
* (49.5)
800x600@85Hz
53.67
85.06
* (56.25)
* (56.25)
* (56.25)
852x480@60Hz
31.47
59.94
* (33.54)
* (33.54)
* (34.24)
*
1,024x768@50Hz
39.55
50.00
* (51.89)
* (51.89)
* (51.89)
*
1,024x768@60Hz
48.36
60.00
* (65.0)
* (65.0)
* (65.0)
*
1,024x768@60Hz
48.50
60.02
* (64.99)
* (64.99)
* (65.18)
1,024x768@70Hz
56.48
70.07
* (75.0)
* (75.0)
* (75.0)
1,024x768@75Hz
60.24
74.93
* (80.0)
* (80.0)
* (80.0)
1,024x768@75Hz
60.02
75.03
* (78.75)
* (78.75)
* (78.75)
1,024x768@75Hz
61.01
75.70
* (80.05)
* (80.05)
* (81.0)
1,024x768@85Hz
68.68
85.00
* (94.5)
* (94.5)
* (94.5)
1,024x768@120Hz
97.55
119.99
* (115.5)
* (115.5)
1,066x600@60Hz
37.64
59.94
* (53.0)
* (53.0)
* (53.0)
*
1,152x864@60Hz
53.70
60.00
* (81.62)
* (81.62)
* (81.62)
*
1,152x864@75Hz
67.50
75.00
* (108.0)
* (108.0)
* (108.0)
1,152x900@65Hz
61.20
65.20
* (92.0)
* (92.0)
* (92.0)
1,152x900@66Hz
61.85
66.00
* (94.5)
* (94.5)
* (94.5)
1,152x900@75Hz
71.40
75.60
* (105.1)
* (105.1)
* (105.1)
1,280x768@60Hz
47.78
59.87
* (79.50)
* (79.50)
* (79.50)
1,280x800@50Hz
41.20
50.00
* (68.55)
* (68.55)
* (68.55)
1,280x960@60Hz
60.00
60.00
* (108.0)
* (108.0)
* (108.0)
1,280x960@85Hz
85.94
85.00
* (148.5)
* (148.5)
* (148.5)
1,280x1,024@50Hz
52.70
50.00
* (89.38)
* (89.38)
* (89.38)
*
1,280x1,024@60Hz
63.34
59.98
* (108.18)
* (108.18)
* (108.18)
1,280x1,024@60Hz
63.90
60.00
* (107.35)
* (107.35)
* (107.35)
1,280x1,024@60Hz
63.37
60.01
* (107.5)
* (107.5)
* (107.5)
1,280x1,024@60Hz
63.74
60.02
* (108.1)
* (108.1)
* (108.1)
1,280x1,024@60Hz
63.98
60.02
* (108.0)
* (108.0)
* (108.0)
*
1,280x1,024@60Hz
63.79
60.18
* (108.19)
* (108.19)
* (108.19)
1,280x1,024@66Hz
70.66
66.47
* (119.84)
* (119.84)
* (119.84)
1,280x1,024@75Hz
79.98
75.02
* (135.0)
* (135.0)
* (135.0)
1,280x1,024@76Hz
81.13
76.11
* (135.0)
* (135.0)
* (135.0)
1,280x1,024@85Hz
91.15
85.02
* (157.5)
* (157.5)
1,360x768@60Hz
47.71
60.02
* (85.5)
* (85.5)
* (85.5)
1,366x768@50Hz
39.55
50.00
* (69.92)
* (69.92)
* (69.92)
1,366x768@60Hz
48.36
60.00
* (86.71)
* (86.71)
* (87.44)
1,400x1,050@60Hz
65.12
59.91
* (121.38)
* (121.38)
* (122.43)
1,400x1,050@60Hz
65.32
59.98
* (121.75)
* (121.75)
* (121.75)
*
1,400x1,050@60Hz
65.35
60.12
* (121.81)
* (121.81)
* (121.85)
1,400x1,050@75Hz
82.28
74.87
* (156.0)
* (156.0)
* (156.0)
1,600x1,200@60Hz
75.00
60.00
* (162.0)
* (162.0)
* (162.0)
*
1,920x1,080@60Hz
67.50
60.00
* (148.5)
* (148.5)
* (148.5)
*
1,920x1,200@60Hz
74.04
59.95
* (154.0)
* (154.0)
Macintosh13" (640x480)
35.00
66.67
* (30.24)
* (30.24)
* (30.24)
MacintoshLC13" (640x480)
34.97
66.60
* (31.33)
* (31.33)
* (31.33)
Macintosh16" (832x624)
49.72
74.55
* (57.28)
* (57.28)
* (57.28)
Macintosh19" (1,024x768)
60.24
75.08
* (80.0)
* (80.0)
* (80.0)
Macintosh21" (1,152x870)
68.68
75.06
* (100.0)
* (100.0)
* (100.0)
Macintosh II (1,280x1,024)
80.00
75.00
* (134.4)
* (134.4)
* (135.2)
Signal name
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
46
Applicable Input Signals
Component signals
Signal name
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
525(480)/60i
525(480)/60p
625(575)/50i
625(576)/50i
625(575)/50p
625(576)/50p
750(720)/60p
750(720)/50p
1,125(1,080)/60p
1,125(1,080)/60i
1,125(1,080)/50p
1,125(1,080)/50i
1,125(1,080)/24sF
1,125(1,080)/30p
1,125(1,080)/25p
1,125(1,080)/24p
*Mark: Applicable input signal
HDMI1
Horizontal
Vertical
COMPONENT IN
DVI-D IN
frequency (kHz) frequency (Hz) (Dot clock (MHz)) (Dot clock (MHz)) HDMI2
15.73
59.94
* (13.5)
* (27.0)
*
31.47
59.94
* (27.0)
* (27.0)
*
15.63
50.00
* (13.5)
15.63
50.00
* (27.0)
*
31.25
50.00
* (27.0)
*
31.25
50.00
* (27.0)
*
45.00
60.00
* (74.25)
* (74.25)
*
37.50
50.00
* (74.25)
* (74.25)
*
67.50
60.00
* (148.5)1
* (148.5)
*
* (74.25)
*
33.75
60.00
* (74.25)1
* (148.5)
*
56.25
50.00
* (148.5)1
28.13
50.00
* (74.25)1
* (74.25)
*
27.00
48.00
* (74.25)2
* (74.25)
*
33.75
30.00
* (74.25)1
28.13
25.00
* (74.25)1
* (74.25)
*
* (74.25)
*
27.00
24.00
* (74.25)1
1: Based on SMPTE 274M standard.
2: Based on SMPTE RP211 standard.
Video signals (VIDEO)
Signal name
1
2
3
4
5
6
7
NTSC
PAL
PAL60
SECAM
NTSC 4.43
PAL N
PAL M
Horizontal
frequency(kHz)
15.73
15.63
15.73
15.63
15.73
15.63
15.73
Vertical
frequency(Hz)
59.94
50.00
59.94
50.00
59.94
50.00
59.94
47
Shipping condition
This function allows you to reset the unit to the factory setting.
1
2
Setup
Press to display the Setup menu.
Press to select “OSD Language”.
1/2
Signal
Screensaver
Input label
ECO Mode settings
Wobbling
Component/RGB-in select
Off
RGB
No activity power off
Press for more than 3 seconds.
3
Press to select “Shipping”.
Disable
English(UK)
OSD Language
Options
Shipping
Press to display the Shipping menu.
4
Press to select “YES”.
Press to con¿rm.
5
6
Wait for 10 seconds.
Press the power switch (
) on main unit to turn the power off.
[from the unit]
1 Press the MENU button till the Setup menu is displayed.
2 Press the Volume Up“+” or Down“–” button to select “OSD Language”.
3 Press and hold the ENTER button till the Shipping menu is displayed.
4 Press the Volume Up“+” or Down“–” button to select “YES”.
5 Press the ENTER button and wait for 10 sec.
) on main unit to turn the power off.
6 Press the power switch (
48
Shipping
YES
NO
Speci¿cations
TH-42LF30ER
Power Source
Power Consumption
Power on
Stand-by condition
Power off condition
LCD Display panel
Screen size
(No.of pixels)
Operating condition
Temperature
Humidity
Applicable signals
Colour System
Scanning format
PC signals
Connection terminals
VIDEO
AUDIO L-R
HDMI 1/2
COMPONENT/RGB IN
G/Y
B/PB/CB
R/PR/CR
AUDIO L-R
DVI-D IN
DVI-D OUT
AUDIO
PC IN
AUDIO
SERIAL IN
SERIAL OUT
TH-47LF30ER
220 - 240 V AC, 50/60Hz
290 W
0.5 W
0.3 W
42-inch IPS panel, 16:9 aspect ratio
930 mm (W) × 523 mm (H) × 1,067 mm
(diagonal)
2,073,600 (1,920 (W) × 1,080 (H))
[5,760 × 1,080 dots]
340 W
0.5 W
0.3 W
47-inch IPS panel, 16:9 aspect ratio
1,039 mm (W) × 584 mm (H) × 1,192 mm
(diagonal)
2,073,600 (1,920 (W) × 1,080 (H))
[5,760 × 1,080 dots]
0 °C - 40 °C
20 % - 80 %
NTSC, PAL, PAL60, SECAM, NTSC 4.43, PAL M, PAL N
525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i ·
50p · 24p · 25p · 30p · 24sF
VGA, SVGA, XGA, SXGA
UXGA ···· (compressed)
Horizontal scanning frequency 30 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
BNC
RCA Pin jack × 2
BNC
BNC
BNC
RCA Pin jack × 2
DVI-D 24 Pin × 2
Content Protection
Stereo mini jack (M3) × 1
High-Density Mini D-sub 15 Pin
Stereo mini jack (M3) × 1
External Control Terminal
D-sub 9 Pin × 2
1.0 Vp-p (75 ȍ)
0.5 Vrms
TYPE A Connector
with sync 1.0 Vp-p (75 ȍ)
0.7 Vp-p (75 ȍ)
0.7 Vp-p (75 ȍ)
0.5 Vrms
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
0.5 Vrms, Shared with PC IN
G with sync 1.0 Vp-p (75 ȍ)
G without sync 0.7 Vp-p (75 ȍ)
B: 0.7 Vp-p (75 ȍ)
R: 0.7 Vp-p (75 ȍ)
HD/VD: 1.0 - 5.0 Vp-p (high impedance)
0.5 Vrms, Shared with DVI-D IN
RS-232C compatible
Sound
Speakers
Audio Output
Dimensions (W × H × D)
Mass (weight)
50 mm × 90 mm × 2 pcs
10 W [5 W + 5 W] (10 % THD)
968 mm × 561 mm × 116 mm
1,079 mm × 624 mm × 117 mm
approx. 21.0 kg
approx. 25.0 kg
Notes:
• Design and speci¿cations are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with the EMC standards listed below.
EN55022, EN55024, EN61000-3-2, EN61000-3-3.
49
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used
electrical and electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives
2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and
prevent any potential negative effects on human health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your
local municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please
contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
Customer’s Record
The model number and serial number of this product can be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identi¿cation in the event of theft or loss, and for Warranty Service purposes.
Model Number
Web Site : http://panasonic.net
¤ Panasonic Corporation 2011
Serial Number
Download PDF
Similar pages