ORIGINAL LINE
USER MANUAL
Automatic water fill machines
U_EN II
Part No.:
CONTENT
ORIGINAL LINE
CONTENT......................................................................................................................................................... 2
GENERAL............................................................................................................................................................ 4
Introduction...............................................................................................................................................................4
Warnings.....................................................................................................................................................................4
Precautions.................................................................................................................................................................4
Intended use...............................................................................................................................................................4
Facts & weight............................................................................................................................................................5
General function description.................................................................................................................................5
OVERVIEW OF COMPONENTS......................................................................................................... 6
A2.................................................................................................................................................................................6
DA4..............................................................................................................................................................................7
Thermos A..................................................................................................................................................................8
Mega Gold A..............................................................................................................................................................9
Function................................................................................................................................................................... 10
A2, DA4.................................................................................................................................................................... 10
Mega Gold A, Thermos A...................................................................................................................................... 11
INSTALLATION AND START-UP...................................................................................................... 12
Positioning............................................................................................................................................................... 12
Water connection.................................................................................................................................................. 12
Electrical connection............................................................................................................................................. 13
Hot plate function.................................................................................................................................................. 13
First time start-up.................................................................................................................................................. 14
OPERATION.................................................................................................................................................. 15
Brewing with coffee............................................................................................................................................... 15
To keep temperature and aroma........................................................................................................................ 17
CLEANING AND CARE......................................................................................................................... 18
Rinse thermos, decanter and serving station................................................................................................... 18
Cleaning serving station....................................................................................................................................... 20
Exterior cleaning.................................................................................................................................................... 20
PROGRAMMING........................................................................................................................................ 21
Adjust water amount............................................................................................................................................ 21
Adjust brew time................................................................................................................................................... 21
POSSIBLE SOLUTION............................................................................................................................. 22
Fault and solution................................................................................................................................................... 22
2
CONTENT
ORIGINAL LINE
DIMENSION................................................................................................................................................... 23
A2.............................................................................................................................................................................. 23
DA4........................................................................................................................................................................... 24
Thermos A............................................................................................................................................................... 25
Mega Gold A........................................................................................................................................................... 26
Some important information may appear in textboxes seen below
IMPORTANT!
INFO.
CAUTION!
INFO.
More INFO.
Note
INFO.
3
GENERAL
ORIGINAL LINE
Introduction
Thank you for choosing a ORIGINAL LINE coffee brewer.
We hope you enjoy it !
Read the user guide before using the machine.
This guide contains important instructions for
proper and safe use of the vending machine.
Always keep this guide close at hand for future
reference.
Warnings
Never immerse the machine, plug or mains
cable in water because there is a danger of
electric shock.
The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning the use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure they
do not play with the appliance.
Do not use the machine if the mains cable, plug
is damaged or the machine has fallen down.
If the mains cable is damaged it must be
replaced by the manufacturer, service agent or
similarly qualified persons in order to avoid a
hazard.
Only plug the machine into a properly installed
earthed safety socket whose line voltage
matches the technical data for the machine.
Precautions
Do not use the machine outdoors so it can be
exposed to weather (rain, snow, frost). It will
cause material damage to the machine.
Do not try to open the machine or repair it in
any way. To avoid danger only have the machine
repaired in a technical workshop, Service
Centre or by a qualified person.
Remove the mains cable from the socket when
the machine is not in use for longer periods. To
do this, pull the plug not the cable.
This appliance must be placed in a horizontal
position which is resistant to any water that
may leak.
Place the machine out of the reach of children.
Position the mains cable so that people cannot
trip over it. Keep it away from sharp edges and
heat sources.
The new hose-sets supplied with this appliance
are to be used, old hose-sets must not be reused.
This appliance is not suitable for installation in
an area where a water jet could be used.
This appliance must not be cleaned by a water
jet.
Intended use
This appliance is intended to be used in
household and similar applications such as:
- Staff kitchen areas in shops.
- Offices and other commercial working
environments.
- On agricultural estates.
- By clients in hotels, motels and other
residential type environments.
- Bed and breakfast type environments.
4
For the optimal performance of the machine
these parameters shall not be exceeded:
- Maximum permissible inlet water pressure :
800KPa (8Bar)
- Minimum permissible inlet water pressure:
200KPa (2Bar)
- Maximum working temperature: 40°ºC
- Minimum working temperature: 10°ºC
GENERAL
ORIGINAL LINE
Facts & weight
DA4
A2
THERMOS
A
MEGA
GOLD A
Height
428 mm
428 mm
557 mm
655 mm
Width
410 mm
205 mm
205 mm
205 mm
Depth
410 mm
410 mm
410 mm
445 mm
Thermos/decanter volume
2x1.8 L
1.8 L
2.2 L
2.5 L
Power supply
400V
2N/ 4780 W
230 V
1N/2390W
Brew Options
4-12 Cups
4-12 Cups
4-15 Cups
4-17 Cups
Capacity
30 L/h
15 L/h
15 L/h
19 L/h
Brew time
6min
6min
7min
8.5min
Hot plates
4
1
None
None
FACTS
Water connection
MODEL/NAME
Weight
230 V 1N/2200W
10 Amp. 50/60Hz
Cold water 1/2 R*
A2
DA 4
THERMOS A
MEGA GOLD A
9 kg
15.5 kg
10 kg
11.5 kg
General function description
The Coffee brewer is equipped with a key pad for automatic water filling.
The key pad allows you to adjust the number of cups for each brewing.
The water tank is fitted with a float switch that will activate heating unit when water is filled, this
starts the brew process. During the brewing process a lamp will be lit on the machine’s right side.
When the tank is empty of water the heater unit will be switched off and the lamp will be turned off.
A brew process takes around 6min to complete.
5
OVERVIEW OF COMPONENTS
Front view
A2
Glass decanter
Upper hot plate
Tank Lid
Filiter Holder
Handle
Power Switch
Display
Glass decanter
Lower hot plate
6
ORIGINAL LINE
OVERVIEW OF COMPONENTS
ORIGINAL LINE
Front view
DA4
Glass decanters
Upper hot plates
Tank Lid
Filiter Holder
Handle
Brewing lamp
Power Switch
Glass decanters
Lower hot plates
7
OVERVIEW OF COMPONENTS
Front view
Thermos A
Tank Lid
Filiter Holder
Upper Lid
Power Switch
Display
Carry Handle
Thermos
8
ORIGINAL LINE
OVERVIEW OF COMPONENTS
ORIGINAL LINE
Front view
Mega Gold A
Tank Lid
Filiter Holder
Upper Lid
Power Switch
Carry Handle
Display
Serving Station
Tap for Coffee
Drip Tray Insert
Drip Tray
9
OVERVIEW OF COMPONENTS
ORIGINAL LINE
Function
A2, DA4
ON-OFF button for display
and lower hot plate.
Shows the number of cups.
Display is blinking when brewing.
Increase the number of cups.
Decrease the number of cups.
Starts brewing.
During a brewing you may press
this button to stop the brew
process.
10
ON-OFF button
For upper hot plate.
OVERVIEW OF COMPONENTS
ORIGINAL LINE
Function
Mega Gold A, Thermos A
ON - OFF button.
Shows the number of cups.
Display is blinking when brewing.
Increase the number of cups.
Decrease the number of cups.
Starts brewing.
During a brewing you may press
this button to stop the brew
process.
11
INSTALLATION AND START-UP
ORIGINAL LINE
Positioning
Min. 10cm
Min. 10cm
Place the machine on a flat horizontal surface that will support the weight of
the machine.
Note
Make sure air is able to circulate behind the machine
(minimum 10cm).
Water connection
A
Connect the supplied water hose to the cold water connection using a ½’’
R-connection(A). When pushing the machine into position make sure there is
no interference to the hose to ensure proper water flow.
Water supply to the machine is the customer’s responsibility according to
instruction and advice from the supplier.
In areas with high level lime problem, a descaling filter should be mounted.
Note
12
The new hose set supplied with the appliance shall be used and
that old hose sets shall not be reused. Connection to a closable
valve is recommended. Min. water pressure; 2bar (200kPa). Max.
waterpressure; 8bar (800kPa).
INSTALLATION AND START-UP
ORIGINAL LINE
Electrical connection
A2, THERMOS A, MEGA GOLD A
IMPORTANT!
Connect the plug to a separate earthed wall socket.
230 V, 10 Amp.
DA4
The brewer is not reconnectable and may only be installed to the electric
supply network with a voltage that is stated on the brewer and shall be carried
out by an authorized electrician.
Recommended: install a line circuit breaker and a earth fault breaker to the
machine.
AUTION!
C
Connection to a separate 3 phase only
- B
rewer should be connected to 400V with zero and earth.
- Use 10 Amp fuses.
IMPORTANT!
Electrical installations must be done of an certificated electrician: 400V 2N/
4400 W
Hot plate function
II Upper hot plate
Turn on left power switch: I for lower hot
plate,
and right power switch: II for upper hot plate.
Ensure that the lamps turn on and that the hot
plates get warm.
I
II
Turn off power switches I and II when not
in use.
I Lower hot plate
13
INSTALLATION AND START-UP
ORIGINAL LINE
First time start-up
A
I
A
IMPORTANT!
First time you use the machine do the first brewing with water only.
Slide the filter holder into position without filter and coffee.
Turn on the power switch(A).
Select 12 cups by adjusting
CAUTION!
A thermos or
decanter must
always be in the
machine when
brewing is in
progress.
14
or
button.
Place the thermos or decanter under the filter holder.
Press the button
to start the brew process.
After 20-30 seconds water shall start to pour into the filterholder and down
in the thermos or decanter.
When brewing is completed, empty the thermos or decanter.
A whole brew process takes around 6 minutes.
OPERATION
ORIGINAL LINE
Brewing with coffee
Place a 90mm filter in the filter holder.
01
Add coffee , restaurant / catering
grounded coffee). Make sure that the
coffee is evenly spread.
02
Slide the filter
holder into
position.
03
I
A
Turn on power switch( I / A) to activate the
dispaly and key pad.
04
15
OPERATION
ORIGINAL LINE
Place the thermos or decanter
under the filterholder.
05
Choose number of cups for your brewing by using the buttons described
below.
- Press the
button to increase number of cups
- Press the
button to decrease number of cups
When you have selected your desired number of cups press the
button to start brewing. During the brew process the number in
the dispaly will blink.
When the brewing is completed the display will stop blinking and a
3 second beep will be heard from the machine.
It is now safe to remove the thermos or decanter.
CAUTION!
Under no circumstances
fill brewed coffee into
the machine. It may cause
machine damage.
16
CAUTION!
Do not remove
decanter or thermos
before display have
stoped blinking and
ready beep has been
heard, it can cause
serious spill and
burns.
Tips
Do not mix freshly brewed
coffee with old coffee kept
warm. It will result in poor
coffee quality.
06
OPERATION
ORIGINAL LINE
To keep temperature and aroma
TIPS FOR KEEPING
COFFEE HOT
Pre-heat the serving
station, start a brewing
with only water into
the serving station.
When brewing is
complete let it stand
for about 1 hour. Pour
out the water. Then
start a brew with
coffee.
A
To keep temperature and aroma, put the lid (A) back on the serving station
immediately after the brewing.
Empty the filter holder from filter and coffee grounds and clean the filter
holder. Machine is now ready for the next brew.
Tips for
achieving the
best quality
Do not change the recommended portion of coffee.
Do not mix freshly brewed coffee with old coffee.
Always rinse the serving station before next brew.
17
CLEANING AND CARE
ORIGINAL LINE
Rinse thermos, decanter and serving station
Before each brewing, rinse the thermos, decanter or serving station with fresh tap water.
When cleaning the outside, use a soft rag with liquid cleaning agent to prevent scratches.
CAUTION!
The machine should not be submerged in water
or washed in a dishwasher. it will result in machine
damage.
18
CLEANING AND CARE
ORIGINAL LINE
Dayly cleaning
Wash the thermos, decanter(B) and the filter holder with liquid solution for coffee machines. Always
remove the filter immediately and clean the filter holder daily, coffee will get moldy.
Clean the spray nozzle(A) and the surrounding area.
Use a soft rag and liquid solution that does not scratch.
A
B
B
Pitcher
Pt. no.110351
Weekly cleaning
Descaling and cleaning.
Pour 50 ml descaling / cleaning solution in a decanter and fill it up with cold water.
Pour the mixture in the machine and proceed with a brewing without a filterpaper or coffee.
Rinse the machine thoroughly by brewing at least 3 times with clean water so that the particles from
descaling solution disappear.
Regular descaling will ensure optimum brewing performance and a longer life of the machine.
When cleaning the decanter in a dishwasher. Dismantle lid and place decanter upside down in the
dishwasher.(A)
A
Descaling agent
Pt. no. 110412
19
CLEANING AND CARE
ORIGINAL LINE
Cleaning serving station
A
Disassemble the level tube and clean it
every week with the enclosed brush.
Take off the main lid and clean the mixer
tube(A).
Cleaning of serving station 2.5 L
IMPORTANT!
Rinse the inside of
the serving station
several times with
fresh tap water.
Fill the serving station with hot water. ( Full
brewing without coffee and filter ).
Put 1 tablespoon with cleaning powder in the
serving station and wait at least 15 minutes.
Tap out 2/3 of the cleaning solution.
Clean the serving station with the cleaning brush.
Rinse the serving station with fresh tap water several times before reuse.
OPTIONS
Part No.
CLEANING PARTS
1104162
Cleaning powder
1104231
Cleaning brush
1103360
Cleaning brush for level tube,
mixer tube
Exterior cleaning
When cleaning exterior of the
machine, use a soft rag with liquid
cleaning agent to prevent scratches.
20
PROGRAMMING
ORIGINAL LINE
Adjust water amount
Adjust amount of brew water
Press the buttons
and
at same time in 5 seconds.
The buzzer beeps twice. Display shows 0.
- Press the
button to increase amount of water.
- Press the
button to decrease amount of water.
- 1 step = 5%
- Press the
button to confirm the change.
ADJUSTMENTS
5 = 25%
4 = 20%
3 = 15%
2 = 10%
1 = 5%
0
- 1 = - 5%
- 2 = -10%
- 3 = - 15%
- 4 = - 20%
- 5 = - 25%
Adjust brew time
Adjust the brew time
Press the buttons
and
at same time in 5 seconds.
The buzzer beeps four times. Display shows 0.
- Press the
button to increase brewing time.
- Press the
button to decrease brewing time.
- 1 step = 5%
- Press the
Display shows
button to confirm the change.
and machine is ready to use.
21
POSSIBLE SOLUTION
ORIGINAL LINE
Fault and solution
FAULT
IMPORTANT!
All maintenance
and installations
must be done
of an authorized
technician.
22
POSSIBLE SOLUTION
Power switch does not lit
heck plug connection to wall socket.
C
Check fuse in plug.
Check if hot plate becomes warm, if so
replace power switch.
Hot plate does not become
warm although switch is lit.
Check connection to hot plate.
If hot plate is defective, replace.
Brewer excess steam.
Machine may require descaling.
Spray nozzel may need unblocking.
Hose may be bent.
Inlet to boiler may be blocked. Descale
machine - if boiler still defective - replace.
Machine will not brew.
Check overheating protection.
Check microswicth.
Check connection to boiler.
Boiler unit may need replacing.
The machine does not take
in water
Make sure water tap is open.
Make sure the water hose is not bent.
Check inlet valve.
Check that the display is blinking.
The machines does not
stop taking in water.
Dirt in the inlet valve.
inlet valve is defective - replace
PCB is defective - replace
The machine is giving
wrong amount of water.
Check water tap.
Water hose is bent.
Dirt in inlet valve.
Water amount adjustment set in display is
adjusted faulty. Adjust according to page 21.
Defect floatregulator in inlet valve - replace
DIMENSION
ORIGINAL LINE
A2
A
D
E
F
B
C
Model
A
B
C
D
E
F
A2
595mm
205mm
410mm
428mm
578mm
360mm
23
DIMENSION
ORIGINAL LINE
DA4
E
D
C
F
B
A
24
Model
A
B
C
D
E
F
DA4
410mm
410mm
428mm
595mm
578mm
360mm
DIMENSION
ORIGINAL LINE
Thermos A
A
D
F
C
B
Model
A
B
C
D
F
Thermos A
557mm
205mm
410mm
708mm
360mm
25
DIMENSION
ORIGINAL LINE
Mega Gold A
F
A
E
B
D
C
Model
A
B
C
D
E
F
MEGA Gold A
655mm
205mm
445mm
390mm
105mm
806mm
26
For the warranty to be valid the conditions for maintenance must have been
followed according to our instructions, proper precaution has been made and
warranty claim been issued without delay.
The affected equipment may not be used during awaiting service if there is any risk
that the damage or defect would worsen.
The warranty will not cover consumption supplies such as glassware, normal
maintenance such as cleaning of filters, contaminations in water, lime, incorrect
voltages, pressure or adjustment of water amounts.
The warranty will not cover damages of defects caused by incorrect handling and
operation of the appliance.
FOR SERVICE
Please contact your dealer
Your Dealer
www.creminternational.com
Download PDF
Similar pages