United Kingdom
en
User Guide
Gas Fired Wall Mounted Condensing Combination Boiler
EcoBlue Advance Combi
24 - 28 - 33 - 40
Please keep these instructions in a safe place.
If you move house, please hand them over to the next occupier.
Model Range
Baxi EcoBlue Advance 24 Combi ErPD
G.C.No 47-077-14
Baxi EcoBlue Advance 28 Combi ErPD
G.C.No 47-077-15
Baxi EcoBlue Advance 33 Combi ErPD
G.C.No 47-077-16
Baxi EcoBlue Advance 40 Combi ErPD
G.C.No 47-077-17
Dear Customer,
Thank you for purchasing this appliance.
Please read this manual carefully before using the product and keep it in a safe place for future reference.
In order to ensure continued safe and efficient operation we recommend that the product is regularly maintained. Our Service and
After Sales organization can assist with this.
We hope you will receive many years of satisfactory service.
0086
© Baxi Heating UK Ltd 2017 All rights reserved. No part of this
publication may be reproduced or transmitted in any form or by any
means, or stored in any retrieval system of any nature (including in any
database), in each case whether electronic, mechanical, recording or
otherwise, without the prior written permission of the copyright owner,
except for permitted fair dealing under Copyrights, Designs and
Patents Act 1988.
Applications for the copyright owner’s permission to reproduce or
make other use of any part of this publication should be made, giving
details of the proposed use, to the following address:
The Company Secretary, Baxi Heating UK Limited,
Brooks House, Coventry Road, Warwick. CV34 4LL
Full acknowledgement of author and source must be given.
WARNING: Any person who does any unauthorised act in relation to a
copyright work may be liable to criminal prosecution and civil claims for
damages.
The Benchmark Scheme
Baxi Heating UK Ltd is a licensed member of the Benchmark Scheme
which aims to improve the standards of installation and commissioning
of domestic heating and hot water systems in the UK and to encourage
regular servicing to optimise safety, efficiency and performance.
Benchmark is managed and promoted by Heating and Hotwater
Industry Council. For more information visit www.centralheating.co.uk
2
EcoBlue Advance Combi
7219716 - 03 (04/17)
Contents
Contents
1
2
Introduction
5
1.1
1.2
1.3
1.4
1.5
5
5
5
6
6
6
7
7
Safety
2.1
2.2
3
4
6
7
8
General Safety Instructions
Recommendations
2.2.1
Benchmark Commissioning Checklist
8
9
9
Technical Specifications
10
3.1
Technical Data
10
Description of the Product
11
4.1
4.2
11
11
11
12
13
13
13
4.3
4.4
4.5
5
General
Additional Documentation
Symbols Used
Abbreviations / Glossary
Extent of Liabilities
1.5.1
Manufacturer’s Liability
1.5.2
Installer’s Responsibility
1.5.3
User’s Responsibility
General Description
Operating Principle
4.2.1
In Operation
Control Panel Description
Standard Delivery
Accessories & Options
4.5.1
Optional Extras
Operation
14
5.1
5.2
5.3
14
16
16
Operation Checking Procedure & Basic Fault Identification
Shutdown
Frost Protection
Settings
17
6.1
17
17
17
17
17
Setting the Boiler Temperatures
6.1.1
Boiler Temperature
6.1.2
Domestic Hot Water Temperature
6.1.3
Summer - Winter - Heating Only Mode
6.1.4
Information Display
Maintenance
18
7.1
7.2
7.3
7.4
7.5
18
18
19
20
21
7219716 - 03 (04/17)
General
Maintenance Instructions
Repressurising the System
Venting the System
Draining the System
EcoBlue Advance Combi
3
Contents
8
9
10
11
12
13
4
Troubleshooting
22
8.1
8.2
22
23
Error Codes
Fault Finding
Decommissioning
24
9.1
24
Decommissioning Procedure
Disposal
24
10.1
24
Disposal / Recycling
Environmental
25
11.1
11.2
25
25
Energy Saving
Room Thermostats and Settings
Warranty
26
12.1
12.2
26
26
26
General
Terms of Warranty
12.2.1 Standard Warranty Terms and Conditions
Appendix
28
13.1
28
28
29
31
ErP Information
13.1.1 Product Fiche - Combination Boilers
13.1.2 Package Fiche - Boilers
13.1.3 Package Fiche - Combination Heaters (Boilers or Heat Pumps)
EcoBlue Advance Combi
7219716 - 03 (04/17)
Introduction
1
Introduction
1.1
General
Warning
This boiler can be used by children aged 8 years and
above and by persons with reduced physical, sensory
or mental capabilities or lack of experience and
knowledge when they have been given supervision or
instruction concerning the safe use of the device and
understand the resulting risks. Children must not be
allowed to play with the appliance. Cleaning and user
maintenance must not be carried out by children
without supervision.
1
WARNING
Installation, repair and maintenance must only be
carried out only by a competent person. This
document is intended for use by competent persons,
All Gas Safe registered engineers carry an ID card with their
licence number and a photograph. You can check your engineer
is registered by telephoning 0800 408 5500 or online at
www.gassaferegister.co.uk
This manual is intended for the user of the Baxi EcoBlue
Advance Combi boiler. If the appliance is sold or transferred, or
if the owner moves leaving the appliance behind you should
ensure that the manual is kept with the appliance for
consultation by the new owner and their installer.
The appliance is designed as a boiler for use in residential
domestic environments on a governed meter supply only. The
selection of this boiler is entirely at the owner’s risk. If the
appliance is used for purposes other than or in excess of these
specifications, the manufacturer will not accept any liability for
resulting loss, damage or injury.
1.2
Additional Documentation
The manufacturer will not accept any liability whatsoever
for loss, damage or injury arising as a result of failure to
observe the instructions for use, maintenance and
installation of the appliance.
Various timers, external controls, etc. are available as optional
extras. Full details are contained in the relevant sales literature.
1.3
Symbols Used
In these instructions, various danger levels are employed to
draw the user's attention to particular information. In so doing,
we wish to safeguard the user's safety, prevent hazards and
guarantee correct operation of the appliance.
DANGER
Risk of a dangerous situation causing serious
physical injury.
WARNING
Risk of a dangerous situation causing slight physical
injury.
CAUTION
Risk of material damage.
Signals important information .
Signals a referral to other instructions or other pages
in the instructions.
7219716 - 03 (04/17)
EcoBlue Advance Combi
5
1
Introduction
1.4
Abbreviations / Glossary
DHW: Domestic hot water
CH: Central heating
GB: Great Britain
IE: Ireland
BS: British standard
HHIC: Heating and Hotwater Industry Council
Pnc: Condensing output
1.5
Extent of Liabilities
1.5.1.
Manufacturer's Liability
Our products are manufactured in compliance with the
requirements of the various european applicable Directives.
They are therefore delivered with
marking and all relevant
documentation. In the interest of customers, we are
continuously endeavouring to make improvements in product
quality. All the specifications stated in this document are
therefore subject to change without notice.
The manufacturer will not accept any liability for loss, damage or
injury arising as a result of:Failure to abide by the instructions on using the appliance.
Failure to regularly maintain the appliance, or faulty or
inadequate maintenance of the appliance.
Failure to abide by the instructions on installing the
appliance.
This company declares that no substances harmful to
health are contained in the appliance or used during
appliance manufacture.
The appliance is suitable only for installation in GB and IE and
should be installed in accordance with the rules in force, and
only used in a suitably ventilated location.
In GB, the installation must be carried out by a Gas Safe
Registered Installer. It must be carried out in accordance with
the current and relevant requirements of legislation and
guidance.
Where no specific instructions are given, reference should be
made to the relevant British Standard Code of Practice.
In IE, the installation must be carried out by a competent Person
and installed in accordance with the current edition of I.S. 813
‘Domestic Gas Installations’, the current Building Regulations
and reference should be made to the current ETCI rules for
electrical installation.
Incorrect installation could invalidate the warranty and may lead
to prosecution.
6
EcoBlue Advance Combi
7219716 - 03 (04/17)
Introduction
1.5.2
1
Installer's Responsibility
The installer is responsible for the installation and initial start up
of the appliance. The installer must adhere to the following
instructions:
Read and follow the instructions given in the manuals
provided with the appliance.
Carry out installation in compliance with the prevailing
legislation and standards.
Ensure the system is flushed and inhibitor added.
Install the flue/chimney system correctly ensuring it is
operational and complies with prevailing legislation and
standards, regardless of location of the boiler’s installation.
Only the installer should perform the initial start up and carry
out any checks necessary.
Explain the installation to the user.
Complete the Benchmark Commissioning Checklist - this is a
condition of the warranty !
Warn the user of the obligation to check the appliance and
maintain it in good working order.
Give all the instruction manuals to the user.
1.5.3.
User's Responsibility
To guarantee optimum operation of the installation, you must
observe the following instructions:
Read and observe the instructions given in the manuals
supplied with the appliance.
Seek the assistance of a qualified installer for the installation
and initial commissioning.
Ask the installer to explain the installation.
Have the required annual inspection and maintenance
carried out by a qualified installer and ensure the Benchmark
Service Record in the Installation Manual is completed - this
is a condition of the warranty !
Keep the manuals in good condition and near to the
appliance.
This appliance must not be used by people with a lack of
experience or knowledge, unless they are supervised by
someone familiar with the appliance or if they have been
instructed on how to operate the appliance correctly. Do not
allow children to operate or play with the appliance.
7219716 - 03 (04/17)
EcoBlue Advance Combi
7
2
Safety
2
Safety
2.1
General Safety Instructions
DANGER
If you smell gas:
1. Turn off the gas supply at the meter
2. Open windows and doors in the hazardous area
3. Do not operate light switches
4. Do not operate any electrical equipment
5. Do not use a telephone in the hazardous area
6. Extinguish any naked flame and do not smoke
7. Warn any other occupants and vacate the
premises
8. Telephone the National Gas Emergency Service
on:- 0800 111 999
Water
If a water or gas leak occurs or is suspected, the boiler
can be isolated at the inlet valves by turning their taps
through 90° (1/4 turn) downwards
ON
For advice please contact your Installer, Annual
Service Provider or Baxi Customer Support - The
Service Division of Baxi. You can contact Baxi
Customer Support on telephone number 0344 871 1545.
OFF
Gas
Water
When contacting Baxi Customer Support it will be useful
to have the ‘Benchmark Checklist’ at the back of the
Installation & Service Manual to hand as it includes details
relevant to the boiler and installation.
WARNING
Do not touch flue/chimney pipes. Depending on the
settings of the appliance, the temperature of
flue/chimney pipes may exceed 60 °C.
Do not touch radiators for long periods. Depending on
the settings of the appliance, the temperature of
radiators may reach 85 °C.
Take precautions with domestic hot water. Depending
on the settings of the appliance, domestic hot water
temperature may reach 65 °C.
CAUTION
Do not neglect to service the appliance. Contact a
qualified professional or take out a maintenance
contract for the annual servicing of the appliance.
8
EcoBlue Advance Combi
7219716 - 03 (04/17)
Safety
2.2
2
Recommendations
CAUTION
Only qualified professionals are authorised to work
on the appliance and the installation.
The appliance has an integral frost protection mode
as long as there is power to the boiler.
Regularly check the water pressure in the system
(recommended pressure is 1.5 bar).
See section 7.3.
Keep the appliance accessible at all times.
Do not remove or cover the user information and
serial number labels affixed to the boiler control flap.
They must remain legible throughout the
lifetime of the appliance
2.2.1
Benchmark Commissioning Checklist
1. Please ensure that the installer has fully completed the
Benchmark Checklist on the inside back pages of the installation
instructions supplied with the product and that you have signed it
to say that you have received a full and clear explanation of its
operation. The installer is legally required to complete a
commissioning checklist as a means of complying with the
appropriate Building Regulations (England and Wales).
2. All installations must be notified, by the installer, to Local Area
Building Control either directly or through a Competent Persons
Scheme. A Building Regulations Compliance Certificate will then
be issued to the customer who should, on receipt, write the
Notification Number on the Benchmark Checklist.
3. This product should be serviced annually to optimise its
safety, efficiency and performance. The service engineer should
complete the relevant section of the Benchmark Service Record
in the Installation & Service manual after each service.
4. The completed Benchmark Checklist & proof of annual
servicing (where applicable) will be required in the event of any
warranty work.
7219716 - 03 (04/17)
EcoBlue Advance Combi
9
3
Technical Specifications
3
Technical Specifications
3.1
Technical Data
Temperatures
C.H. Flow Temp (adjustable)
25°C to 80°C max (± 5°C)
D.H.W. Flow Temp (adjustable)
40°C to 60°C max (± 5°C)
dependent upon flow rate
Central Heating Primary Circuit
Pressures
Safety Discharge
Max Operating
Min Operating
Recommended Operating Range
bar
3
2.5
0.5
1-2
DHW Circuit
Pressures
Max Operating
Min Operating
Flow Rates
bar
Electrical Supply
230V~ 50Hz
(Appliance must be connected to an
earthed supply)
8
0.15
(24) (28) (33) (40)
l/min l/min l/min l/min
DHW Flow Rate
@ 35o C Rise
Min Working
DHW Flow Rate
Electrical Protection
IPX5D (without integral timer)
IP20 (with integral timer)
External Fuse Rating
9.8
2
11.5
2
13.5
2
3A
16.4
2
NOTE: All data in this section are nominal
values and subject to normal production
tolerances.
IMPORTANT: Where Low Flow Taps or Fittings
are intended to be used in the DHW system
connected it is strongly recommended that the
DHW flow rate DOES NOT fall below 2.5 l/min.
This will ensure reliable operation of the DHW
function.
Dimensions & Clearances These must be maintained in the event of
any alteration in the property, e.g. additional cupboards etc.
5mm Min
450mm
5mm Min
175mm Min (300mm
Min if using 80/125mm
flueing system)
450mm Min
763mm
For Servicing
Purposes &
Operating the
Controls
5mm Min In
Operation
345mm
150mm* Min *This is MINIMUM
recommended dimension.
Greater clearance will aid
installation and maintenance.
10
EcoBlue Advance Combi
7219716 - 03 (04/17)
Description of the Product
4
Description of the Product
4.1
General Description
4
1. The Baxi EcoBlue Advance Combi range of fully automatic
gas fired wall mounted condensing combination boilers are room
sealed and fan assisted, and will serve central heating and
mains fed domestic hot water.
2. The boiler is set to give a maximum output of :24 model 28 model 33 model Serial Number
Label
40 model -
24 kW DHW
21.2 kW CH Pnc (Condensing)
28 kW DHW
25.3 kW CH Pnc (Condensing)
33 kW DHW
29.6 kW CH Pnc (Condensing)
40 kW DHW
33.8 kW CH Pnc (Condensing)
User Label
3. The boiler is factory set for use only on Natural Gas (G20).
4. Priority is given to domestic hot water.
6. The boiler model, serial number and Gas Council number are
also shown on the information label behind the boiler control flap
(Fig. 1). This is for user reference.
Boiler Control
Flap
4.2
Fig. 1
The boiler can be set in 3 operating modes:- ‘Summer’
(DHW only), ‘Winter’ (CH & DHW) or ‘Heating Only’ (CH only) by
use of the
button - see section 6.1.
Operating Principle
4.2.1
In Operation
1. Whilst the boiler is in operation cooled flue gases are
discharged through the flue gas discharge pipe. This may
appear as a cloud of steam which is normal.
2. Condensed water is discharged from the boiler heat
exchanger into a pipe (the condensate drain). This pipe must
never be altered or re-routed except by a qualified professional.
7219716 - 03 (04/17)
EcoBlue Advance Combi
11
4
Description of the Product
4.3
Control Panel Description
Key to Controls
R
Standby - Reset - Esc
Boiler Information View
Standby - Reset - Esc Button
Boiler Information View Button
Increase CH Temperature Button
R
/R
/P
Decrease CH Temperature Button
+
+
Increase DHW Temperature Button
Decrease DHW Temperature Button
Domestic Hot Water (DHW)
Temperature Adjustment
Central Heating (CH)
Summer / Winter / Only Heating Mode Button
Temperature Adjustment
Summer - DHW only mode
Summer - Winter - Heating Only
Mode
Winter - DHW & CH mode
Heating Only - Only CH mode
Display Description
DHW and CH OFF (frost protection still enabled)
See Section 5.3 for information
R
Indicates an error that prevents burner from igniting
Error - Not resettable by user
Water pressure too low
R
Indicates an error resettable by the user
Generic error
Burner lit
DHW mode (symbol will flash with demand)
Heating mode (symbol will flash with demand)
Units for temperature
Display showing all available characters
Units for pressure
R
Service due
12
EcoBlue Advance Combi
7219716 - 03 (04/17)
Description of the Product
4.4
4
Standard Delivery
1. The literature pack contains:
Literature pack
• Installation & Servicing Manual (including ‘Benchmark’)
• User Guide Instructions
• Flue Accessories & Fitting Guide
• Registration Card
• Fernox Leaflet
• Adey Leaflet
• Wall Template
• Product Leaflet
• Package Leaflet
4.5
Accessories & Options
4.5.1
Optional Extras
1. Various timers, external controls, etc. are available as optional
extras.
Outdoor Sensor - Wired
Mechanical Thermostat
Mechanical Timer (24 hr) - Plug-in
Digital Timer (7 day) - Plug-in
Single Channel Timer - Wired
Two Channel Timer - Wired
RF Digital Programmable Room Unit - Wireless
RF Mechanical Programmable Room Unit - Wireless
Condensate Discharge Pump and Pipe ‘Trace Heating’
Flue Accessories (elbows, extensions, clamps etc.)
(refer to the Flue Accessories & Fitting Guide supplied
in the literature pack.)
Remote relief valve kit
Boiler discharge pump
1M Condensate Drain Pipe ‘Trace Heating’ Element
2M Condensate Drain Pipe ‘Trace Heating’ Element
3M Condensate Drain Pipe ‘Trace Heating’ Element
5M Condensate Drain Pipe ‘Trace Heating’ Element
Any of the above MUST be fitted ONLY by a qualified competent
person. Further details can be found in the relevant sales
literature and at www.baxi.co.uk
7219716 - 03 (04/17)
EcoBlue Advance Combi
13
5
Operation
5
Operation
5.1
Operation Checking Procedure & Basic Fault Identification
IMPORTANT: Where Low Flow Taps or Fittings
are intended to be used in the DHW system
connected it is strongly recommended that the
DHW flow rate DOES NOT fall below 2.5 l/min.
This will ensure reliable operation of the DHW
function.
START
Make sure the gas
supply is turned ON
and check if other
gas appliances are
operating (e.g. fire,
cooker). If the
property has a
prepayment meter
ensure it has
sufficient credit.
YES
Is there electricity to the
boiler ? Is the display lit ?
NO
R
R
Burner Flame
(Indicates burner
is on)
If no gas, consult
your supplier.
YES
Is the Room Thermostat (if
fitted) set high enough ?
NO
Is the Central Heating
System Pressure
between 0.7 and 2.5 bar ?
15
YES
20
5
25
10
1
4
8
3
9
2
Typical
examples of
external timer
2
1
3
4
0
bar
5
6
7
CH ON
YES
NO
10
11
Boiler operating
satisfactorily.
Check electrical supply to
boiler is switched on.
NO
12
NO
YES
NO
Is the Timer ON and
calling for heat ?
Is the Burner Flame
showing.
YES
CH OFF
Turn Room Thermostat
to maximum setting
(typical example shown)
If the reading* falls below 0.7
bar repressurise the system
as described in section 7.3.
R
5
10
15
20
25
Ensure timer is set for
Central Heating ON (see
any instructions supplied
with timer)
Error Code 118 showing
low pressure.
14
EcoBlue Advance Combi
7219716 - 03 (04/17)
Operation
YES
Is the E and R symbol
illuminated or flashing ?
Is the Spanner symbol
illuminated or flashing ?
Reset
Symbol
R
Error
Code
OR
YES
Flame
Failure
Error
Symbol
5
R
Spanner
Symbol
YES
Press the Reset Button
R
/R
/P
+
+
If it does
not reset
CONTACT
YOUR
INSTALLER OR
SERVICE
ENGINEER.
Reset Button
*To display the water pressure
press
until
is shown.
will alternate with the system
pressure.
(NOTE: When the pump is running
the gauge under the boiler may
show a slightly different reading to
the display)
7219716 - 03 (04/17)
If you don’t know what you
need to do to get the boiler
to light, or need help with
the system and controls,
contact your installer as
soon as possible
EcoBlue Advance Combi
15
5
Operation
5.2
Shutdown
1. If it is anticipated that the boiler will not be used for a long
period or the property is to be unoccupied it is recommended
that the system drained if the electricity & gas supplies are to be
turned off. Your installer will be able to offer advice.
5.3
Frost Protection
1. The boiler incorporates an integral frost protection feature that
will operate in both Central Heating and Domestic Hot Water
modes, and also when in standby (
displayed).
2. If the boiler temperature falls below 5°C, then the boiler will
operate until the water temperature has been raised.
3. Further protection may be required for the system. Consult
your installer for details.
16
EcoBlue Advance Combi
7219716 - 03 (04/17)
Settings
6
Settings
6.1
Setting the Boiler Temperatures
6.1.1
R
Button
6
Boiler Temperature
Button
To increase or decrease the boiler temperature:-
R
1. Press
to increase the Central Heating temperature.*
2. Press
to decrease the Central Heating temperature.*
/R
/P
+
+
Domestic Hot Water
Temperature
Central Heating
Temperature
Adjustment
Adjustment
Summer - Winter - Heating
Only Mode
If
and
are pressed together P02 will
be displayed. Pressing either button again will scroll
through the display and P26 & P64 will be shown.
Press
R to return to normal display.
Display Screen
R
6.1.2
Domestic Hot Water Temperature
To adjust the domestic hot water temperature:-
Boiler Central Heating
Selected Temperature
Displayed*
R
1. Press
to increase the Domestic Hot Water temperature.
2. Press
to decrease the Domestic Hot Water temperature.
6.1.3
Summer - Winter - Heating Only Mode
1. Press
button until the required mode appears:Summer - Domestic Hot Water only mode
Domestic Hot Water
Selected Temperature
Displayed
Winter - Domestic Hot Water & Central
Heating mode
The values displayed are the temperature as measured
at the boiler, not necessarily that at the radiator or tap.
Because of differences in systems, seasonal variations
in mains water temperature etc. some adjustment of the
temperatures may be required to achieve the desired
results. Your installer will be able to offer advice.
Heating Only - Only Central Heating mode
In Heating Only mode Domestic Hot Water will NOT be
supplied when a hot tap is opened.
See 6.1.1 or 6.1.2 to set the required temperature.
*Where Outdoor Sensor fitted
If the control system includes an Outdoor Sensor the
temperature display and Central Heating buttons perform
different functions than those described.
6.1.4
Display - This shows a simulated room temperature set
point, NOT the boiler temperature.
1. The table opposite shows information that can be displayed
by pressing the
button.
Buttons - They will alter the displayed temperature, and
for optimum use should be used to change the displayed
temperature to the same as selected on the room
thermostat.
2. Depending upon boiler model and any system controls
connected to the appliance, not all information codes will be
displayed and some that are will not have a value.
By selecting a temperature different to the room
thermostat altered comfort levels will be achieved. Your
installer will be able to offer advice.
3. Press
7219716 - 03 (04/17)
Information Display
R to return to the normal display.
EcoBlue Advance Combi
17
7
Maintenance
7
Maintenance
7.1
General
1. The boiler does not require any special maintenance.
However, the boiler must be serviced annually in accordance
with the Installation and Service Manual and the relevant
section of the Benchmark Service Record completed in order to
maintain the warranty.
Taking out a maintenance contract is recommended.
CAUTION
Maintenance operations must be performed by a
qualified competent person.
Use only genuine spare parts.
2. The painted panels should be wiped with a damp cloth and
then dried completely. DO NOT USE ABRASIVE CLEANING
AGENTS.
7.2
Maintenance Instructions
1. The central heating installation should be checked regularly.
Proceed as follows:
• Check the water pressure in the central heating installation.
If the water pressure is lower than 0.7 bar, the water
must be topped up. If necessary: top up the CH system
(recommended water pressure between 1 and 1.5 bar
when system is cold).
• Check radiators for leaks and (especially in damp areas) for
rust.
• Open and close the radiator valves several times a year to
ensure they can still be rotated.
• Only clean the outside of the boiler with a damp cloth. Do not
use abrasive cleaning agents.
CAUTION
Only a qualified installer may clean the inside of the
boiler.
18
EcoBlue Advance Combi
7219716 - 03 (04/17)
Maintenance
7.3
7
Re-pressurising the System
1. If the water pressure is too low, the installation must be
re-pressurised.
2. The normal operating water pressure is between 1 and 2 bar.
If the pressure exceeds 3 bar the safety pressure valve will
operate and a fault is indicated (E117 displayed). Contact your
installer.
3. It may be necessary to repressurise the system occasionally
(when the water pressure falls below 0.7 or E118 displayed). A
filling device (the filling loop) will be fitted on the system. This
will be on the boiler itself, or on pipework near to the boiler.
If the water pressure requires regular re-pressurising a
fault or leak is indicated. Seek advice from your installer.
4. If you are unsure of its position, or cannot identify it, consult
the installer who fitted the boiler.
Pressure Gauge
5. The filling loop consists of two isolating taps and a separate
filling pipe with connection fittings.
6. Only when repressurising should the filling pipe be connected
between the two taps. Ensure that the nuts on the pipe ends
are tightened onto the taps.
2
1
7. Fully open one of the taps first, and then while watching the
pressure gauge, carefully open the second tap.
3
4
0
8. The system pressure is shown at all times on the pressure
gauge and can be viewed on the display when there is power to
the boiler.
bar
Normal Pressure
9. To check the water pressure on the boiler display press
until
is shown. This will alternate with the system
pressure. (When the pump is running the pressure gauge may
show a slightly different reading to the display).
2
1
3
10. When the figures on the display or needle on the pressure
gauge indicate between 1 and 1.5 bar turn both taps off.
4
0
bar
11. Disconnect the filling pipe from the taps (a small amount of
water may be present) and remove it. Keep the pipe in a safe
place for future use.
Requires
Repressurising
12. If blanking caps are available fit them to the taps.
Tap In Open
Position
Go to the ‘How to videos’ section of the ‘Information &
advice’ page at www.baxi.co.uk for further details.
13. When the correct pressure is restored the boiler will reset
automatically.
Tap In Open
Position
Pipe Fitted For
Repressurising
(Remove after use !)
7219716 - 03 (04/17)
EcoBlue Advance Combi
19
7
7.4
Maintenance
Venting the System
1. If any air is present in the appliance or system it must be
removed in order to prevent nuisance noises that may occur
during heating or when drawing off hot water. Proceed as
follows:
1
1.
1
2
2.
3
4
2
3
10
3.
4.
5.
6.
7.
Open the valves of all the radiators connected to the
system.
Set the room thermostat to the highest possible
temperature and any timers to ‘ON’.
Wait until the radiators are warm.
Switch off the boiler.
Vent the radiators. Work from the lowest radiator in the
property.
Open the bleed vent with the key, keeping a cloth
pressed against the vent.
Wait until water comes out of the bleed vent and then
close.
4
WARNING
The CH water in the radiators will still be hot.
5
C
A
B
8.
Switch the boiler on.
9.
After venting, check that the water pressure in the
system is still adequate.
If the water pressure is lower than 0.7 bar, the water
must be topped up. If necessary repressurise the system
(recommended pressure between 1 and 1.5 bar when the
system is cold).
10. Reset the room thermostat to the desired temperature.
6
20
EcoBlue Advance Combi
7
7219716 - 03 (04/17)
Maintenance
7.5
7
Draining the System
1. It may be necessary to drain the CH system if radiators need
to be replaced or removed, if there is a major water leak or if
there is a risk of freezing. Proceed as follows:
1
1.
1
2
3
4
2
3
2.
3.
4.
5.
Open the valves of all the radiators connected to the
system.
Switch off or disconnect the boiler’s electrical isolation point.
Wait until all the radiators are cold.
Connect a drain hose to the lowest draining point. Place the
end of the hose in a drain or at a place where drained
water will not cause any damage.
Open the CH system drain valve. Drain the system.
WARNING
The CH water may still be hot.
6.
When water stops flowing from the draining point, close the
draining valve.
See Sections 7.3 & 7.4 for Re-pressurising & Venting
the system. If in doubt seek advice from your installer.
5
After draining and re-pressurising the concentration of
system corrosion inhibitor and anti-freeze may become
excessively diluted - seek advice from your installer.
4
7219716 - 03 (04/17)
EcoBlue Advance Combi
21
8
Troubleshooting
8
Troubleshooting
8.1
Error Codes
R
/R
/P
+
+
1. In the unlikely event of an error occurring the display will
show one of two symbols
or R . In both cases the display
will also show
symbol and the numeric value of the error
(see the ‘Table of Error Codes).
2.
When the spanner is displayed the error cannot be
reset by the user.
Please contact your Installer, Annual Service Provider or Baxi
Customer Support - The Service Division of Baxi to arrange
your Annual Service. You can contact Baxi Customer Support
on 0344 871 1545.
When contacting Baxi Customer Support it will be useful to
have the ‘Benchmark Checklist’ at the back of the Installation
& Service Manual to hand as it includes details relevant to the
boiler and installation.
R
3. R fault errors can be reset by pressing the
and holding for two seconds.
Examples of
Error Codes
Display typically
after reset
R button
Error Codes 117 and 118 can be reset by restoring the
correct system pressure as described in 7.3.
WARNING
Burner Flame
(Indicates burner is on)
If an error code different from those described in the
‘Table of Error Codes’ appears on the display or a
certain fault appears frequently, contact ‘Baxi
Customer Support’.
When these symbols flash operation
of either Domestic Hot Water or
Central Heating is indicated
Table Of Error Codes
22
20
Central Heating NTC Fault
28
Flue NTC Fault
40
Central Heating Return NTC Fault
110 R
Safety Thermostat Operated (pump fault)
111 R
Safety Thermostat Operated (over temperature)
117
Primary System Water Pressure Too High
118
Primary System Water Pressure Too Low
125 R
Circulation Fault (Primary)
128
Flame Failure (no lock-out)
130
Flue NTC Operated
133 R
Interruption Of Gas Supply or Flame Failure
151 R
Flame Failure
160 R
Fan or Fan Wiring Fault
321
Hot Water NTC Fault
384
False Flame
EcoBlue Advance Combi
7219716 - 03 (04/17)
Troubleshooting
8.2
8
Fault Finding
1. If the boiler is not working also check section 5.1 Operation Checking
Procedure & Basic Fault Identification or contact your Installer.
Problem
Possible Causes
The boiler is not working.
There is no domestic hot water.
The DHW function is switched off.
Solution
Check that the boiler is being supplied with power.
Check fuses and the switches.
Check whether the gas valve is properly open.
If the property has a prepayment meter ensure it has
sufficient credit.
Activate the DHW mode.
The water pressure is too low
(< 0.5 bar).
Re-pressurise the system.
Insufficient flow.
Flow must be at least 2.5 litres per minute.
The temperature set point for the
heating is too low.
Increase the value with the CH temperature button or if
a room thermostat is connected, increase the
temperature on the room thermostat.
The heating mode is deactivated.
Activate the heating mode.
The radiator valves are not open.
Open the valves of all radiators connected to the
system.
The radiators are cold.
The boiler is not working.
The water pressure is too low
(< 0.5 bar).
Check that the boiler is being supplied with power.
Check fuses and switches.
Check whether the gas isolation valve is properly open.
If the property has a prepayment meter ensure it has
sufficient credit.
Re-pressurise the system.
The temperature set point for the
heating is too low.
Increase the value with the CH temperature button or if
a room thermostat is connected, increase the
temperature on the room thermostat.
No demand for heating.
Ensure that timers & thermostats are calling for heat.
No power supply.
Check that the boiler is being supplied with power.
Check the fuses and switches.
The water pressure is too low
(< 0.5 bar).
Re-pressurise the system.
The boiler is indicating an error.
Press the Reset button
R
Correct the error, if possible.
The gas pressure is too low.
Check whether the gas isolation valve is fully open.
Open the gas isolation valve.
Condensate drain blocked.
Check drain, especially any external runs in freezing
temperatures.
The boiler is not working.
7219716 - 03 (04/17)
EcoBlue Advance Combi
23
9/10
Decommissioning/Disposal
9
Decommissioning
9.1
Decommissioning Procedure
CAUTION
Only qualified professionals are authorised to
work on the appliance and installation.
1. If you the boiler needs to be decommissioned either
temporarily or permanently the following should be performed:
•
Switch off the boiler.
•
Switch off the boiler’s electrical connection.
•
Close the boiler gas valve.
•
Drain the CH system.
Seek the advice of your installer.
10
Disposal
10.1 Disposal / Recycling
WARNING
Removal and disposal of the boiler must be carried
out by a qualified installer in accordance with local
and national regulations.
24
EcoBlue Advance Combi
7219716 - 03 (04/17)
Environmental
11
11
Environmental
11.1 Energy Saving
Tips on saving energy:
Do not cover radiators. Do not hang curtains in front of
radiators.
Install reflective panels behind the radiators to prevent heat
losses.
Insulate the pipes in rooms that are not heated (cellars and
lofts).
Install loft insulation & double glazing.
Use draught excluders where necessary.
Upgrade any older boiler external controls.
Turn down room thermostats by 1°
Turn off radiators in rooms not in use.
Do not run hot (or cold) water pointlessly.
Fit a water-saving shower head to save up to 40 % energy.
Take showers rather than baths. A bath consumes twice as
much water and energy.
11.2 Room Thermostats and Settings
Various models of room thermostat are available. The
thermostat type and setting affect the total energy consumption.
A few tips:
Fully opening or closing thermostatic radiator valves results
in unwanted temperature fluctuations. Turn the thermostat knob
or valve higher or lower in small steps.
Lower the thermostat to approximately 20°C. This reduces
heating costs and energy consumption.
When rooms are to be aired lower the thermostat well in
advance.
When setting thermostats or programmers take account of
days when nobody will be in and holidays.
7219716 - 03 (04/17)
EcoBlue Advance Combi
25
12
Warranty
12
Warranty
12.1 General
To make sure your boiler warranty is activated and maintained, it
is essential that the:
1. Benchmark checklist is completed by your installer
2. Warranty is registered within 30 days
3. Boiler has an annual service
Please note that failure to adhere to terms and conditions will
make your warranty invalid.
12.2 Terms of Warranty
12.2.1 Standard Warranty Terms and Conditions
Warranty Registration, Service & Repair
For full terms and conditions, visit www.baxi.co.uk/terms.
Benchmark Checklist
The Benchmark Checklist will be completed by your installer and
records that the boiler has been installed and commissioned
correctly. It can be found at the back of the installation and
service manual and should be kept in a safe place for the life of
the boiler. We will check that the Benchmark Checklist has been
completed on an in-warranty visit.
Ways to register your warranty
If your boiler is eligible for an extended warranty, your installer
may register the product on your behalf and provide you with the
relevant documentation. Please check with your installer.
Should this not be the case, you can register your warranty
online at www.baxi.co.uk/registration
26
EcoBlue Advance Combi
7219716 - 03 (04/17)
Warranty
12
Annual Service
A service must be completed every 12 months from the
date of installation to maintain your warranty.
This service must be completed by one of the following:
• A Gas Safe registered installer/engineer
• Baxi Customer Support; call us 0344 871 1545
Please make sure that your engineer has logged the service
information at the back of the installation and service manual.
You will be asked for your service history on any in-warranty
repair visit.
If you experience a problem with your boiler
For any in or out of warranty repair, Baxi Customer Support is
on hand to help you. Call our award-winning team to arrange
for one of our nationwide team of Gas Safe registered
engineers to visit.
If your product is in warranty, everything is free of charge,
subject to our warranty terms and conditions. If it is out of
warranty, we can still help and offer a range of options you can
choose from to suit your needs.
Contact Baxi Customer Support 0344 871 1545
Serial Number
Label
User Label
Opening hours
Monday - Friday, 8.00am - 6.00pm
Weekends and Bank Holidays, 8.30am - 2.00pm
Please note calls may be recorded for training and monitoring
purposes.
When contacting Baxi Customer Support, please have the
following information to hand:
Boiler Control
Flap
• Boiler serial number. This can be found on the
appliance.
• Proof of purchase if you do not have the boiler serial
number.
Please note that for in-warranty repairs, our engineers will ask
to see your service history record, completed Benchmark
Checklist and details of your installer. These can all be found in
the installation and user manual.
7219716 - 03 (04/17)
EcoBlue Advance Combi
27
13
Appendix
13
Appendix
13.1 ErP Information
13.1.1 Product Fiche - Combination Boilers
Product fiche for combination boilers
24
28
33
40
Medium
Medium
Medium
Medium
XL
XL
XXL
XXL
Seasonal space heating energy efficiency class
A
A
A
A
Water heating energy efficiency class
A
A
A
A
Baxi EcoBlue Advance Combi ErPD
Space heating - Temperature application
Water heating - Declared load profile
Rated heat output (Prated or Psup)
kW
20
24
28
32
Space heating - Annual energy consumption
kWh
GJ
17204
62
20645
74
24086
87
27527
99
Water heating - Annual energy consumption
kWh
GJ
16
17
22
23
Seasonal space heating energy efficiency
%
93
93
93
93
Water heating energy efficiency
%
90
88
86
85
Sound power level LWA indoors
dB
51
52
53
55
See
For specific precautions about assembling, installing and maintaining,
consult the relevant section as detailed on the Contents page.
28
EcoBlue Advance Combi
7219716 - 03 (04/17)
Appendix
13
13.1.2 Package Fiche - Boilers
Package fiche for boilers indicating the space heating energy efficiency of the package
Seasonal space heating energy efficiency of boiler
1
‘I’
Temperature control
from fiche of temperature control
Class I = 1%, Class II = 2%, Class III = 1.5%,
Class IV = 2%, Class V = 3%, Class VI = 4%,
Class VII = 3.5%, Class VIII = 5%
Supplementary boiler
Seasonal space heating energy efficiency (in %)
%
2
+
%
3
from fiche of boiler
(
- ‘I’ ) x 0.1 = ±
Solar contribution
%
(1)
Tank rating
from fiche of solar device
Collector size (in m²)
(‘III’ x
Tank volume (in m³)
+
A* = 0.95, A = 0.91,
B = 0.86, C = 0.83,
D - G = 0.81
Collector efficiency (in
%)
‘IV’ x
) x
0.9 x (
/100)
x
4
= +
%
(1) If tank rating is above A, use 0.95
Supplementary heat pump
Seasonal space heating energy efficiency (in %)
5
from fiche of heat pump
(
- ‘I’ ) x ‘II’ = +
%
Solar contribution AND Supplementary heat pump
4
select smaller value
0.5 x
5
0.5 x
OR
6
= -
Seasonal space heating energy efficiency of package
%
7
%
Seasonal space heating energy efficiency class of package
G
F
E
D
C
B
A
+
A
++
A
+++
A
<30%
Boiler and supplementary heat pump installed with low temperature heat emitters at 35°C ?
7
from fiche of heat pump
+ (50 x ‘II’) =
%
The energy efficiency of the package of products provided for in this fiche may not correspond to its actual energy efficiency once installed
in a building, as this efficiency is influenced by further factors such as heat loss in the distribution system and the dimensioning of the
products in relation to building size and characteristics.
AD-3000743-01
I
II
7219716 - 03 (04/17)
The value of the seasonal space heating energy efficiency of the
preferential space heater, expressed in %.
The factor for weighting the heat output of preferential and supple
mentary heaters of a package as set out in the following table.
EcoBlue Advance Combi
29
13
Appendix
13.1.2 Package Fiche - Boilers (cont)
III
I
IV
V
The value of the mathematical expression: 294/(11 ʷ Prated),
whereby ‘Prated’ is related to the preferential space heater.
The value of the mathematical expression 115/(11 ʷ Prated),
whereby ‘Prated’ is related to the preferential space heater.
Weighting of boilers
Psup / (Prated + Psup)(1)(2)
II, package without hot water storage tank
II, package with hot water storage tank
0
0
0
0.1
0.3
0.37
0.2
0.55
0.70
0.3
0.75
0.85
0.4
0.85
0.94
0.5
0.95
0.98
0.6
0.98
1.00
≥ 0.7
1.00
1.00
(1) The intermediate values are calculated by linear interpolation between the two adjacent values.
(2) Prated is related to the preferential space heater or combination heater.
Package efficiency
24
Baxi EcoBlue Advance Combi ErPD
30
Temperature control X
%
Temperature control Y
%
EcoBlue Advance Combi
28
33
40
7219716 - 03 (04/17)
Appendix
13
13.1.3 Package Fiche - Combination Heaters (Boilers
or Heat Pumps)
Package fiche for combination heaters (boilers or heat pumps) indicating the water heating energy efficiency of the
package
Water heating energy efficiency of combination heater
1
‘I’
%
Declared load profile:
Solar contribution
Auxiliary electricity
2
from fiche of solar device
(1.1 x ‘I’ - 10%) x ‘II’ -
‘III’
- ‘I’ = +
Water heating energy efficiency of package under average climate
%
3
%
Water heating energy efficiency class of package under average climate
G
F
E
D
C
B
A
+
A
++
A
+++
A
M
L
XL
XXL
<28%
Water heating energy efficiency under colder and warmer climate conditions
3
2
- 0.2 x
Colder:
3
Warmer:
=
%
=
%
2
+ 0.4 x
The energy efficiency of the package of products provided for in this fiche may not correspond to its actual energy efficiency once installed
in a building, as this efficiency is influenced by further factors such as heat loss in the distribution system and the dimensioning of the
products in relation to building size and characteristics.
AD-3000747-01
I
II
III
7219716 - 03 (04/17)
The value of the water heating energy efficiency of the combination
heater, expressed in %.
The value of the mathematical expression (220 ʷ Qref)/Qnonsol,
where Qref is taken from Regulation EU 811/2013, Annex VII Table
15 and Qnonsol from the product fiche of the solar device for the de
clared load profile M, L, XL or XXL of the combination heater.
The value of the mathematical expression (Qaux ʷ 2,5)/(220 ʷ Qref),
expressed in %, where Qaux is taken from the product fiche of the
solar device and Qref from Regulation EU 811/2013, Annex VII Ta
ble 15 for the declared load profile M, L, XL or XXL.
EcoBlue Advance Combi
31
Baxi Customer Support
0344 871 1545
Opening hours
Monday - Friday, 8.00am-6.00pm
Weekends and Bank Holidays, 8.30am-2.00pm
Please note calls may be recorded for training and monitoring purposes
baxi.co.uk
Register now to activate your warranty:
www.baxi.co.uk/registration
For the warranty to be maintained, please make sure...
1
2
3
Benchmark checklist is completed
Warranty is registered within 30 days
The boiler has an annual service
For full terms and conditions, visit www.baxi.co.uk/terms. Failure to adhere to
terms and conditions will void your manufacturer’s warranty.
Baxi
Brooks House,
Coventry Road,
Warwick, CV34 4LL
0086
Please ensure the boiler is installed in accordance with these installation
instructions and that you adhere to the Building Regulations.
e&oe
All descriptions and illustrations provided in this document have been
carefully prepared but we reserve the right to make changes and
improvements in our products which may affect the accuracy of the
information contained in this leaflet. All goods are sold subject to our
standard Conditions of Sale which are available on request.
7219716 - 03 (04/17)
Download PDF
Similar pages