ELECTRIC RANGE CONVECTION OVEN 900mm

Technical data sheet for
ELECTRIC RANGE CONVECTION
OVEN 900mm
RN8610EC, RN8613EC, RN8616EC, RN8619EC
Heavy-duty construction
2.4kW open radiant elements
Optional Hot Plate elements
300mm, 600mm and 600mm griddle plate
options
Optional Hot Plate elements
GN 2/1 6.6kW electric convection oven
Drop down door
Stainless steel exterior
Easy clean
Easy service
Fully modular
RN8610EC
Low back models (RNL) available
O verall Cons tru c tion
Con tro ls
• Welded hob with 1.5mm 304 stainless steel bull nose
• Easy view control settings on knob
• Galvanized steel chassis
• Splashback and hob sides 1.2mm 304 stainless steel
• Front panels and oven sides 0.9mm 304 stainless steel
• 150mm legs in 63mm dia. heavy-duty 1.2mm 304 stainless steel
with adjustable feet
Cooktop
• 2.4kW open radiant elements in heavy-duty welded element frames
• Vitreous enamelled element module and hob spill trays
• Hot Plate elements with machine finished 8mm steel plate
(optional extra)
• Large easy use control knob - heat resistant reinforced
Cooktop
• Radiant elements with energy regulator controls
• Hot Plate elements with energy regulator controls
• 50-320˚C thermostat per 300mm griddle section
• Indicator lights for power and heating for each element control
Oven
• 50-320˚C thermostatic control
• Indicator lights for power and heating
• 12mm thick mild steel griddle plates
Cl eaning and S er v icing
• Aluminised steel internal construction
• Removable vitreous enamelled element module and hob spill trays
• 2.5mm 304 stainless steel griddle splash guards
• All models with easy clean stainless steel external finish
Griddle sections are standard on RH side. Available on LH side or
centre to order or by conversion.
• Hinge up element and griddle sections
• Fully welded and vitreous enamelled oven liner
• Door hinge spring adjustable on unit (door outer removed)
• Heavy-duty easy remove heavy wire chrome rack supports
• All parts front accessible from installed position
Oven
• Removable oven racking and sole plate
• Easy clean vitreous enamel oven and door inner
• GN 2/1 capacity with 4 position racking
• Door disengages for lift off removal and increased service access
• Cast iron even heat oven sole plate
• Access to all parts from front of unit
• 6.5kW heating elements
• 100W heavy-duty motor
• 200mm diameter heavy-duty circulation fan
• Welded frame drop down door with heavy-duty spring hinge system
• 0.9mm 304 stainless steel door outer
• 1.0mm press formed vitreous enamelled door inner
• High density fibreglass insulated
• Stay cool stainless steel door handle with cast metal handle mounts
• Supplied with two chrome wire oven racks
Technical data sheet for
ELECTRIC RANGE CONVECTION OVEN
900mm
Cooktop
RN8610EC, RN8613EC, RN8616EC, RN8619EC
900
805
2.4 kW Open Radiant elements
2.0 kW Hot Plate elements
3.6 kW Griddle elements
(per 300mm griddle section)
70
4.5kW bottom heat element
2.0kW top heat element
Oven Fan Motor
100W
Electrical requirements
RN8610EC
21.0 kW
RN8613EC
19.8 kW
RN8616EC
18.6 kW
RN8619EC
17.4 kW
Electrical connection
20.9 kW max.
400-415Vac, 50/60hz, 3P+N+E
L1 29.3A max.
L2 29.3A max.
L3 28.3A max.
150
Oven
80
769
466
100
915
970 LOW BACK OPTION
1130
Sp e ci f ic a tions
ELECTRICAL
ENTRY
525
RN8610EC
RN8613EC
RN8616EC
RN8619EC
Griddle Plate
300mm Griddle cooking surface
292mm x 475mm, 1387cm2
600mm Griddle cooking surface
592mm x 475mm, 2812cm2
900mm Griddle cooking surface
892mm x 475mm, 4237cm2
Oven Dimensions
Width 665mm
Depth 650mm
Height 400mm
Rack size 650mm x 600mm
Rack positions 4
Electrical connection
69mm from RH side, 484mm from rear,
and 150mm from floor
Dimensions
Width 900mm
Depth 805mm
Height 915mm
Incl. splashback 1130mm
Incl. low back 970mm
Nett weight
198kg
Packing data
1.03m3, 263kg
Width 945mm
Depth 870mm
Height 1255mm
Options at extra cost
Hot Plate elements
(replace individual open radiant elements)
Ribbed griddle plates
Joining caps
Castors
Plinth mounting
Printed in New Zealand
© Copyright Moffat Limited
Moffat/BH/6864
Download PDF
Similar pages