METERING FAUCETS
PILLAR TAP FAUCET
MODEL NUMBER:
1340.105 Cast spout, 1.5 GPM pressure compensating
vandal-resistant aerator
1340M.105 Same as above with mechanical mixing valve
OPTIONAL 4" or 8" Deck plates
605P.400 4" brass deck plate with 1/4" fixation studs
and quick spin nuts. (6-1/8" x 2-1/8" x 1/2")
605P.800 8" brass deck plate with 1/4" fixation studs
and quick spin nuts. (10-1/8" x 2-3/8" x 1/2")
26mm
(1-1/16")
GENERAL DESCRIPTION:
106mm
(4-3/16")
Metering pillar tap faucet. Vandal resistant solid brass
construction. Easy-push handle. Water conserving pressure
compensating 1.5 GPM aerator. Factory set for a maximum of
0.25 gallon flow per activation. Replaceable cartridge. Adjustable
flow cycle.
PRODUCT FEATURES:
130mm
(5-1/8")
78mm
51mm (3-1/8")
(2")
MOUNTING
SURFACE
• Pressure Compensating Aerator: Provides a constant
51mm
(2")
52mm
(2")
water flow of 1.5 gpm throughout the pressure range.
• Vandal-Resistant Brass Construction and Aerator:
89mm
(3-1/2")
Durable - Excellent in high use applications.
560mm
(22")
• Automatic Shut-off: Stops water and energy waste. Ideal for
public restrooms where uncontrolled water usage is costly.
3/8" COMPRESSION
• Meets ADA Standard: Requires less than 5 lbs. of operating
force to initiate flow per ANSI A117.1.
• Single Supply: For cold or tempered water.
• Adjustable Flow Cycle
• Replaceable Valve Cartridge: Facilitates simple
replacement.
• Optional Mixing Valves: (sold separately)
• Mechanical (Model # 021943-0070A)
• Thermostatic (Model # 605XTMV)
• Flexible Supply Hose: With 3/8" Compression Connection
• Optional 4" or 8" Deck Plate
• Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
SUGGESTED SPECIFICATION
Metering faucet shall feature a single handle vandal-resistant brass construction with a replaceable valve cartridge and an
adjustable flow cycle. Shall also feature a water-conserving pressure compensating 1.5 gpm/5.7L/min vandal-resistant aerator.
Factory set to maintain flow below the maximum 0.25 gallons per cycle required by ANSI A112.18.1M. Push button activator
shall meet ANSI A117.1 Standard. Fitting shall be American Standard Model # 1340.105.002.
© 2012 AS America Inc.
L31
Revised 6/11
METERING FAUCETS
PILLAR TAP FAUCET
CODES AND STANDARDS
FLOW RATE*
VOLUME PER CYCLE (GAL)
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9 and Annex G
0.25
0.20
0.15
0.10
0.05
0.00
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USABLE BUILDING FACILITIES-CHECK LOCAL CODES
20
40
60
80
PRESSURE (PSI)
Other Aerators Available:
Part Suffix
V10**
V05
Description
1.0 gpm (3.8 Lpm) PCA Vandal-Resistant Aerator
0.5 gpm (1.9 Lpm) PCA Vandal-Resistant Non-Aerated Spray
*PCA - Pressure Compensating
**Meets Cal Green Code
© 2012 AS America Inc.
L32
Revised 6/11
Download PDF
Similar pages