Dispense Spares Price List

X0AO
DISPENSE SPARES PRICE LIST
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
A-Line Elegance - Standard & Tall Elegance Tap Identification Page 2
50x50 mm Cast Bracket and 60x60 mm Bracket Identification Page 3
Standard Elegance Tap Spares - Page 5
A-Line Elegance Tap Spares - Page 4
Tap Locking Rings and Nuts Page 7
Font Branding and Illumination Page 8
50x50 mm Cast Bracket Drip Tray
60x60 mm Bracket
Frames - Page 11
Through The Bar Drip Tray Frames
DripTrayFrames Page 12
Page 13
Standard and Special Deep Aperture Brackets Page 15
Tall Version Elegance Tap Spares Page 6
Lens Bonding
Gaskets Page 9
Drip Trays (Stainless Steel) and Adaptors Page 16
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
Click here to visit Porter Lancastrian Web-Site www.Porta.Co,Uk
Doc 73 - Nov 17 V 13.0
Page 1
X1A0T
X1AO
ELEGANCE TAP IDENTIFICATION INFORMATION
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
A-Line Elegance Tap - For Spares see page 4
Note: When ordering spares for Porter Lancastrian Limited
Elegance Taps it is important to first identify which of the three
variants of Elegance Tap are fitted to your Dispense
Equipment.
The A-Line Elegance Tap is identified by the 8 flutes on the
main tap body
The Standard Elegance Tap is identified by the 6 flats on the
main tap body.
The Tall Version Elegance tap is identified by its smooth main
tap body.
Please state which version of tap spares are required when you
contact the Sales Office on
0870 871 0111
Standard Elegance Tap - For Spares see page 5
Tall Elegance Tap - For Spares see page 6
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
CLICK HERE TO RETURN TO INDEX PAGE
Page 2
X2A0T
X2AO
CLAMP BRACKET / APERTURE IDENTIFICATION INFORMATION
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
50 X 50 mm Cast Bracket - For Replacement Tray Frames see Page 11
Note: When ordering spare Drip Tray Frames for Dispense Fonts it is
important to first measure the aperture in the base of your Dispense Font;
the aperture will either measure 50 mm or 60 mm wide; please also
specify whether Plastic or Stainless Steel Drip Trays are to be fitted to
the Dispense Font.
Fonts with Clamp apertures of 50 mm require 50x50 Cast Bracket Drip
Tray Frames, see Page 11 of this Price List.
Fonts with Clamp apertures of 60 mm require 60x60 Metal Bracket Drip
Tray Frames, see Page 12 of this Price List
Note: Original specification Fonts fitted with 50 x 50 Metal
Brackets will require a new 50 x 50 Cast Bracket (see page 11)
in addition to the Drip Tray Frame in order to up-grade the
Font to the latest specification. Fonts with Clamp Apertures of
46 x 39 mm are obsolete and no longer supported.
Please contact the Sales Office on
0871 870 0111
60 x 60 mm Metal Bracket - For Replacement Tray Frames see page 12
Note: 60x60 mm Metal Clamp Brackets are
currently only in use on the 4 Out Inline
Chameleon Font range
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
CLICK HERE TO RETURN TO INDEX PAGE
Page 3
X3A0T
X3AO
A-LINE ELEGANCE TAP SPARES PRICE LIST
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
NOTE : CLICK HERE TO VIEW THE A-LINE Elegance - STANDARD
Dispense Tap
Part Number Tap Seal Kit
price £
051/011104/04 - Note: This
A-LINE ELEGANCE TAP
STAINLESS STEEL / GOLD
Seal Kit is for the A-Line,
Standard and Tall Elegance
Taps.
& TALL
Elegance TAPS FOR IDENTIFICATION PURPOSES BEFORE PLACING AN ORDER
Part Number Spout
price £
A-Line Elegance Tap Standard
Spout 051/011008/04
9.10
A-Line Elegance Tap Ale
Spout 051/011009/04
12.22
5.15
Dispense Tap
Part Number Elegance Tap
Spout Seal 'O' Ring
price £
ELEGANCE STAINLESS
STEEL / GOLD
OR/BS013/NO
£1.00
Part number Ale Spout Spares
Kit
A-Line & Standard Ale Spout
Kit (4 x 0.030" Holes)
051/011014/04
A-Line & Standard Guinness
Spout Service Kit (5 x 0.025"
Holes) 051/011102/04
Part Numbers for Soft Touch Branding Kits are Unique to any specified brand,
and follow the general form of 051/-----/02
Soft Touch Branding Kit
(2 x Tap + 1 x 22mm Oval Dispense Point Marker)
price £
3.95
3.95
price £
5.20
Note: The price for Soft Touch Branding does not include any artwork origination costs.
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
CLICK HERE TO RETURN TO INDEX PAGE
Page 4
X4A0T
X4AO
STANDARD ELEGANCE TAP SPARES PRICE LIST
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
NOTE : CLICK HERE TO VIEW THE STANDARD Elegance, A-LINE AND TALL Elegance TAPS FOR IDENTIFICATION PURPOSES BEFORE PLACING AN ORDER
Dispense Tap
ELEGANCE TAP
(STANDARD) STAINLESS
STEEL / GOLD
Part Number Tap Seal Kit
price £
051/011104/04 - Note: This
Seal Kit is for the A-Line,
Standard and Tall Elegance
Taps.
Part Number Spout
price £
Elegance Tap Standard Spout
051/09892/04
9.10
Elegance Tap Creamer Spout
051/09891/04
12.22
5.15
Dispense Tap
Part Number Elegance Tap
Spout Seal 'O' Ring
price £
ELEGANCE STAINLESS
STEEL / GOLD
OR/BS013/NO
£1.00
Part number Creamer Spout
Spares Kit
Standard & A-Line Ale Spout
Kit (4 x 0.030" Holes)
051/011014/04
Standard & A-Line Guinness
Spout Service Kit (5 x 0.025"
Holes) 051/011102/04
Part Numbers for Soft Touch Branding Kits are Unique to any specified brand,
and follow the general form of 051/-----/02
Soft Touch Branding Kit
(2 x Tap + 1 x 22mm Oval Dispense Point Marker)
price £
3.95
3.95
price £
5.20
Note: The price for Soft Touch Branding does not include any artwork origination costs.
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
CLICK HERE TO RETURN TO INDEX PAGE
Page 5
X5AO
TALL ELEGANCE TAP SPARES PRICE LIST
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
NOTE : CLICK HERE TO VIEW THE TALL Elegance, A-LINE & STANDARD Elegance TAPS FOR IDENTIFICATION PURPOSES BEFORE PLACING AN ORDER
Dispense Tap
Part Number Tap Seal Kit
price £
051/011104/04 - Note: This
ELEGANCE TAP (TALL )
STAINLESS STEEL / GOLD
Seal Kit is for the A-Line,
Standard and Tall Elegance
Taps.
5.15
Dispense Tap
Part Number Elegance Tap (Tall
Version) Spout Seal 'O' Ring
price £
ELEGANCE STAINLESS
STEEL / GOLD
051/010571/04
£1.00
Part Number Spout
price £
Elegance Tap (Tall Version)
Standard Spout 051/09318/04
9.10
Elegance Tap (Tall
Version)Creamer Spout
051/09317/04
12.22
Part number Creamer Spout
Spares Kit
Standard Creamer Spout Kit
(Tall Version) (5 x 0.030"
Holes) 051/09424/04
Guinness Spout Service Kit
(Tall Version) (5 x 0.025"
Holes) 051/09603/04
Part Numbers for Soft Touch Branding Kits are Unique to any specified brand,
and follow the general form of 051/-----/02
Soft Touch Branding Kit
(2 x Tap + 1 x 22mm Oval Dispense Point Marker)
price £
3.95
3.95
price £
5.20
Note: The price for Soft Touch Branding does not include any artwork origination costs.
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
CLICK HERE TO RETURN TO INDEX PAGE
Page 6
Porter Lancastrian Limited · Lower Healey Business Park · Froom Street · Chorley · PR6 9AR
Tel: 0870 871 0111 · Fax: 0870 871 0112 · email: sales@porta.co.uk · Web: www.porta.co.uk
TAP LOCKING RINGS AND NUTS SPARES PRICE LIST
1/2" BSP Dispense Tap Locking Rings
PL Part No.
Chrome finish Tap Locking Ring
Brass finish Tap Locking Ring
061/010825/04
021/010825/04
price £
£1.65
£1.82
Note: Tap Locking Rings are supplied with Porter Lancastrian
Fonts as applicable (Chaplin, Ikon, Olympus and Crown Bridge
Font ranges) and are available in Chrome and Brass finishes.
1/2" BSP Short Shank Tap Locking Nut
PL Part No.
Tap Locking Nut 1/2" BSP.
051/010822/04
price £
£1.30
Note: This type of Tap Locking Nut is used to fit Dispense
Taps manufactured with short 1/2" BSP threaded shanks.
These nuts are supplied with the Delta, Chameleon and
Ultra Lowline in our Standard Font Range specification.
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
CLICK HERE TO RETURN TO INDEX PAGE
Page 7
Porter Lancastrian Limited · Lower Healey Business Park · Froom Street · Chorley · PR6 9AR
Tel: 0870 871 0111 · Fax: 0870 871 0112 · email: sales@porta.co.uk · Web: www.porta.co.uk
BRANDING AND ILLUMINATION SPARES PRICE LIST
Single LED Illuminated Branding Assemblies
PL Part No.
1 Out BAO (STD. Oval Lens) LED Illuminated Branding Assembly Chrome finish.
1 Out BAO (STD. Oval Lens) LED Illuminated Branding Assembly Brass finish.
1 Out Circular (STD. Circular Lens) LED Illuminated Branding Assembly Chrome finish.
1 Out Circular (STD. Circular Lens) LED Illuminated Branding Assembly Brass finish.
051/15015/02
051/15019/02
051/15112/02
051/15111/02
Spare push-fit LED Illumination Unit
PL Part No.
Plug In LED Unit including 2M Twin Orange / Violet sheathed White Cable
051/15558/02
price £
P.O.A.
P.O.A.
P.O.A.
P.O.A.
price £
£7.50
Spare push-fit 24V AC
LED Illumination unit
spplied with 2 Mtrs of
sheathed Orange / Violet
Cable
Note: Single LED illuminated Branding Assemblies require a
standard 24V AC power supply and accept standard 6mm thick
lenses or Fish Eye Lenses. For 2, 3 and 4 Dispense Point
Lighting Assembly availability please contact the Sales Office
on 0870 871 0111
Standard Non-Illuminated Tab Branding
PL Part No.
1 Out BAO (STD. Oval Lens) Tab Branding Chrome finish.
1 Out BAO (STD. Oval Lens) Tab Branding Brass finish.
1 Out Circular (STD. Circular Lens) Tab Branding Chrome finish.
1 Out Circular (STD. Circular Lens) Tab Branding Brass finish.
051/010620/04
051/010040/04
051/010509/04
051/010192/04
price £
P.O.A.
P.O.A.
P.O.A.
P.O.A.
Note: This Type of Branding is used where product
branding is to be displayed without illumination, these
plates accept standard 6mm thick Lenses and Fish Eye
Lenses.
Single Illumination Branding Assembly - 175mm high - Fork Type
PL Part No.
Single Illumination Assembly 175 mm F ork
051/15869/02
price £
P.O.A.
Note: Single "Fork-Type" Chrome finish LED Branding Assemblies can be fitted to
Dispense Fonts without the need to disconnect the Dispense Tap from the font,. These
Lighting Assemblies require a standard 24V AC power supply and accept standard
6mm thick and Fish Eye Lenses; may be subject to minimum order quantities.
Note 2: Modification to font for cable passage may be required.
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
CLICK HERE TO RETURN TO INDEX PAGE
Page 8
Porter Lancastrian Limited · Lower Healey Business Park · Froom Street · Chorley · PR6 9AR
Tel: 0870 871 0111 · Fax: 0870 871 0112 · email: sales@porta.co.uk · Web: www.porta.co.uk
LENS BONDING GASKET SPARES PRICE LIST
Lens bonding Gaskets for LED Illuminated Branding Assemblies.
PL Part No.
Oval Foam Gasket for Stanadard Oval Lens
Circular Foam Gasket for Standard Circular Lens
051/05473/04
051/14881/03
price £
£0.35
£0.35
Note: These Lens bonding Gaskets are used to install standard 6mm thick
and Fish Eye Lenses into LED Illuminated Lighting housings. Gaskets are also
available for other lens shapes, please contact the Sales Office for part
numbers.
Tissue-Type Lens bonding Gaskets for Non-Illuminated Tab Branding.
PL Part No.
Oval Double Sided Adhesive Tissue Tape Gasket for Standard Oval lenses
Circular Double Sided Adhesive Tissue Tape Gasket for Standard Circular lenses
041/00421/04
051/010646/04
price £
£0.35
£0.35
Note: These Tissue-Type Lens bonding Gaskets are used to install
standard 6mm thick and Fish Eye Lenses onto Non-Illuminated Tab
Branding. Gaskets are also available for other lens shapes, please contact
the Sales Office for part numbers.
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
CLICK HERE TO RETURN TO INDEX PAGE
Page 9
X9A0T
Porter Lancastrian Limited · Lower Healey Business Park · Froom Street · Chorley · PR6 9AR
Tel: 0870 871 0111 · Fax: 0870 871 0112 · email: sales@porta.co.uk · Web: www.porta.co.uk
50 X 50 CAST BRACKET DRIP TRAY FRAME PRICE LIST
NOTE : CLICK HERE TO VIEW THE CLAMP BRACKET IDENTIFICATION PAGE BEFORE PLACING AN ORDER
Drip Tray Frames for Stainless Steel Drip Trays
price £
PL Part No.
Drip Tray Frame for 200 x 125 mm Stainless Steel Drip Tray
Continental Drip Tray Frame for 200 x 125 mm Stainless Steel Drip Tray (Short Side Aligned to Bar Top )
Drip Tray Frame for 300 x 125 mm Stainless Steel Drip Tray
Continental Tray Frame
For 200 x 125 mm Tray
Tray Frame For 200 x
125 mm Tray
051/010740/04
051/010742/04
051/010741/04
£9.50
£9.50
£9.50
Note: These Drip Tray Frames can be used to upgrade Fonts fitted with
Plastic Drip Trays to Stainless Steel Specification and come with Eight
M4 Stainless Steel Screws and an Allen Key as Standard.
Drip Tray Frames for 4" Plastic Drip Trays
PL Part No.
Drip Tray Frame for a Single 4" Drip Tray
Drip Tray Frame for 2 x 4" Drip Trays
Drip Tray Frame for 3 x 4" Drip Trays
Drip Tray Frame for 4 x 4" Drip Trays
Drip Tray Frame for 5 x 4" Drip Trays
Drip Tray Frame for 6 x 4" Drip Trays
051/010739/04
051/010744/04
051/010745/04
051/010746/04
051/010747/04
051/010748/04
price £
£9.50
£9.50
£9.50
£9.50
£9.50
£9.50
.
Tray Frame For Single
4" Drip Tray
Tray Frame For 3 x 4"
Drip Tray
Drip Tray Frames for 4" Plastic Drip Trays - Lowboxa Fonts
PL Part No.
Drip Tray Frame for 2 x 4" Drip Trays
Drip Tray Frame for 3 x 4" Drip Trays
Drip Tray Frame for 4 x 4" Drip Trays
Drip Tray Frame for 5 x 4" Drip Trays
Drip Tray Frame for 6 x 4" Drip Trays
051/010749/04
051/010750/04
051/010751/04
051/010752/04
051/010753/04
Lowboxa Tray Frame
For 3 x 4" Drip Tray
price £
£9.50
£9.50
£9.50
£9.50
£9.50
Note: All Drip Tray Frames when sold as spares come complete with
Eight M4 x 10 Stainless Steel Cap Head Screws (Ref XT/M4010/0) and
an M3 Allen Key (Ref 051/010491/04) as standard.
Drip Tray Frames for 5 x 8" Plastic Drip Trays
PL Part No.
Drip Tray Frame for 5 x 8" Plastic Drip Tray
Continental Drip Tray Frame for 5 x 8" Plastic Drip Tray (Short Side Aligned to Bar Top )
051/010740/04
051/010743/04
Tray Frame For 5" x 8"
Drip Tray
price £
£9.50
£9.50
Continental Tray Frame
For 5" x 8" Drip Tray
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
CLICK HERE TO RETURN TO INDEX PAGE
Page 10
X10AT
60 X 60 METAL BRACKET DRIP TRAY FRAME SPARES PRICE LIST
Porter Lancastrian Limited · Lower Healey Business Park · Froom Street · Chorley · PR6 9AR
Tel: 0870 871 0111 · Fax: 0870 871 0112 · email: sales@porta.co.uk · Web: www.porta.co.uk
NOTE : CLICK HERE TO VIEW THE CLAMP BRACKET IDENTIFICATION PAGE BEFORE PLACING AN ORDER
Drip Tray Frame for Stainless Steel Drip Trays
PL Part No.
Drip Tray Frame for 400 x 125 mm Stainless Steel Drip Tray
price £
051/010451/04
£9.50
Note: This Drip Tray Frame can be used to upgrade Fonts fitted with
Plastic Drip Trays to Stainless Steel Specification. These Drip Trays come
with Eight M4 Stainless Steel Screws and an Allen Key as Standard.
Drip Tray Frame for 4 x 4" Plastic Drip Trays
PL Part No.
Drip Tray Frame for 4" Plastic Drip Trays
051/010584/04
price £
£9.50
Note: This Drip Tray Frame comes complete with Eight M4 x 10
Stainless Steel Cap Head Screws (Ref XT/M4010/0) and an M3 Allen
Key (Ref 051/010491/04) as standard.
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
CLICK HERE TO RETURN TO INDEX PAGE
Page 11
THROUGH THE BAR DRIP TRAY FRAME PRICE LIST
Porter Lancastrian Limited · Lower Healey Business Park · Froom Street · Chorley · PR6 9AR
Tel: 0870 871 0111 · Fax: 0870 871 0112 · email: sales@porta.co.uk · Web: www.porta.co.uk
Through the Bar Drip Tray Frames (1 1/2" BSP Clearance) for Stainless Steel Drip Trays
PL Part No.
Through The Bar Drip Tray Frame for 200 x 125 mm Stainless Steel Drip Tray
Through The Bar Drip Tray Frame for 300 x 125 mm Stainless Steel Drip Tray
Continental Drip Tray Frame for 200 x 125 mm Stainless Steel Drip Tray (Short Side Aligned to Bar Top)
Through The Bar Drip Tray Frame for 400 x 125 mm Stainless Steel Drip Tray
051/09187/04
051/010061/04
051/010125/04
051/010550/04
Through The Bar Drip Tray
Frame (200 x 125 mm Tray)
Through The Bar Drip Tray Frame
(300 x 125 mm Tray)
PL Part No.
Through The Bar Drip Tray Frame for 2 x 4" Drip Trays
Through The Bar Drip Tray Frame for 3 x 4" Drip Trays
Through The Bar Drip Tray Frame for 4 x 4" Drip Trays
Through The Bar Drip Tray Frame for 5 x 4" Drip Trays
Through The Bar Drip Tray Frame for 6 x 4" Drip Trays
051/010468/04
051/010469/04
051/010470/04
051/010471/04
051/010472/04
Through The Bar Drip Tray
Frame 3 x 4" Trays
9.50
9.50
9.50
9.50
Continental Through The Bar Drip Tray Frame (200 x
125 mm Tray) used on Chaplin and Ikon Fonts only.
Through the Bar Drip Tray Frames (1 1/2" BSP Clearance) for 4" Plastic Drip Trays
Through The Bar Drip Tray
Frame 2 x 4" Trays
price £
price £
9.50
9.50
9.50
9.50
9.50
Through The Bar Drip Tray
Frame 5 x 4" Trays
Load Spreading Washer for 1 1/2" BSP Clearance Hole Through the Bar Drip Tray Frames
PL Part No.
THROUGH THE BAR SQUARE WASHER TO SUIT 1 1/2" BSP THREADED TUBE
051/011167/04
price £
2.50
Through The Bar Drip Square Load Spreading Washer to suit Fonts fitted with a 1 1/2"
BSP Threaded Pipe also used on Through the Bar Crown Bridge Fonts.
Through the Bar Drip Tray Frame for 4 Out Inline Chameleon Font (Stainless Steel Drip Tray)
PL Part No.
4 OUT INLINE CHAMELEON (60MM HOLE + 3 X M8 CLEARANCE HOLES) THRU BAR 400 X 125 TRAY FRAME
051/010550/04
price £
9.50
Through The Bar Drip Tray Frame for 4 Out Inline
Chameleon Font
Load Spreading Washer for 4 Out Inline Chameleon Through the Bar Drip Tray Frame
PL Part No.
THROUGH THE BAR SQUARE WASHER (60MM HOLE + 3 X M8 CLEARANCE HOLES) FOR 4 OUT INLINE CHAMELEON
051/010532/04
price £
2.50
Through The Bar Drip Square Load Spreading Washer to suit 4 Out Inline Chameleon Fonts (60mm Hole + 3 x
M8 Clearance Holes) Note: This plate can be used as a drilling guide when installing the Font.
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
CLICK HERE TO RETURN TO INDEX PAGE
Page 12
STANDARD AND SPECIAL CLAMP BRACKET PRICE LIST
Porter Lancastrian Limited · Lower Healey Business Park · Froom Street · Chorley · PR6 9AR
Tel: 0870 871 0111 · Fax: 0870 871 0112 · email: sales@porta.co.uk · Web: www.porta.co.uk
Standard Clamp Brackets
PL Part No.
Standard 50 x 50 Cast Clamp Bracket - to fit Maximum Bar Thickness 70 mm (2.8 Inches)
Standard 60 x 60 Metal Clamp Bracket - to fit Maximum Bar Thickness 75 mm (3.0 Inches)
051/15218/02
051/15480/02
Special Clamp Brackets
PL Part No.
Deep Aperture 50 x 50 Clamp Bracket - to fit Maximum Bar Thickness 170 mm (6.7 Inches)
Deep Aperture 60 x 60 Clamp Bracket - to fit Maximum Bar Thickness 170 mm (6.7 Inches)
051/15556/02
TBC
price £
£11.10
£15.34
price £
£41.69
TBC
It is possible to install Porter Lancastrian Limited Dispense Fonts onto non-standard bar tops of 70 mm or greater by ordering a
special deep aperture Clamp Bracket.
For further details please contact the Sales Office
0870 871 0111
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
CLICK HERE TO RETURN TO INDEX PAGE
Page 13
Porter Lancastrian Limited · Lower Healey Business Park · Froom Street · Chorley · PR6 9AR
Tel: 0870 871 0111 · Fax: 0870 871 0112 · email: sales@porta.co.uk · Web: www.porta.co.uk
DRIPTRAY AND ADAPTOR PRICE LIST
Stainless Steel Drip trays
PL Part No.
Stainless Steel Driptray 200 x 125 x 25 mm (Nominal Size)
Stainless Steel Driptray 300 x 125 x 25 mm (Nominal Size)
Stainless Steel Driptray 400 x 125 x 25 mm (Nominal Size)
051/09177/04
051/010045/04
051/010197/04
200 x 125 x 25 mm
Stainless Steel Drip
Tray
300 x 125 x 25 mm
Stainless Steel Drip
Tray
051/09177/04
051/010045/04
Through The Bar Reducer Kit (To suit 35 mm Clearance Hole in Bar Top)
PL Part No.
1 1/2" BSP TO 1 " BSP Through The Bar Reducer Kit
051/15244/02
price £
£17.16
£18.20
£20.28
price £
£9.50
Note: The 1 1/2" BSP to 1" BSP Through The Bar
Reducer Kit requires a 35mm (1 3/8") clearance
hole in the Bar Top.
Deep Bar (Maximum 170mm ) and Plinth Adaptor for Through The Bar Chaplin, Ikon, Olympus and CTT Boxa Fonts.
PL Part No.
1 1/2" BSP Threaded Tube 200mm Long
TPA/150P200/0
Plinth Height Adaptor for Through The Bar Chaplin, Ikon, Olympus and CTT Boxa Fonts.
PL Part No.
Through The Bar Condensation Base Tray and Font Height Adaptor
051/010962/04
price £
£7.50
price £
£16.15
This Plinth / Adaptor is normally supplied with Ikon, Ikon Europa, Olympus and
Chaplin Condensation Font models, it can be considered for use on noncondensation models where extra height (45mm) is required e.g. filling large
jugs/bottles . Note: it is advisable to order a Deep Bar and Plinth Adaptor
TPA/150P200/0 when fitting this plinth to accomodate the increased depth of font
base.
Chaplin Short Shank Tap Adaptor
PL Part No.
Chaplin Short Shank Tap Adaptor 1/2" BSP Male to 1/2" BSP Female
051/010781/04
price £
£4.97
*Note: This tap adaptor is for use with short shank dispense taps and provides an
additional depth of thread. It should be used in conjunction with standard Chaplin
locking ring as detailed in the Information Sheet ref. 051/010783/04.
SUPPLYING DESIGN INNOVATION & MANUFACTURING IN A GLOBAL DRINKS DISPENSE MARKET
CLICK HERE TO RETURN TO INDEX PAGE
Page 14
Download PDF
Similar pages