Features &

Features & Optional Equipment
Each model in the Encore Series can easily be upgraded with optional
features to answer your business expansion and the needs of your customers.
Standard Features ,
Optional Equipment
A G L’s Heated Roller Construction
Easy Web In-Feed Table
AGL uses a proprietary heated roll
design for faster heat transfer and
uniform temperature across the entire
width of your rollers. This insures
even activation of your thermal
adhesive films without cold or hot
spots. In addition, AGL uses a silicone
coated steel roller construction guaranteed to have a
100% flat profile. Plus, AGL rollers have an embedded
thermal temperature sensor to protect the rollers from
overheating and extends roller life.
Table pivots 90° and is linked to the bottom
idler, making it retract or (travel) when the
table is rotated. This unique feature allows the
operator to web film from the bottom supply
shaft. Also includes a dual latch for secure
docking and a single handle release for smooth
and fast one handed operation.
RTS Brake
(Repeatable Tension System Brake) - Adjusting
film tension throughout the production process
and from job to job. Just set it, record it, and
repeat it. Get consistent results each time you
laminate a print.
Quick Latch
A simple and fast way to secure the
rolls of material loaded onto the
supply shaft. The quick latch cradle
insures film is tracking straight
through the laminator without
walking to one side causing film
distortion and possible silvering.
Tapered Core Chuck
Print Holder
The print holder is used for handling large prints
before they are laminated. It keeps them from
unrolling, touching the floor, or getting dirty.
Makes the operator’s job much easier.
Digital Speed Readout
AGL’s tapered chuck makes film
loading fast and easy.AGL’s special
auto grip will not tear into the
material’s core, making removal as fast
and easy as loading
Fold Down Out-Feed Table
Lower Back Product Rewind
Encore Series Specifications
Max. Film Width:
Core Diameter:
Max. Roll OD:
Speed:
Power:
Air Requirements:
Dimensions:
Maxim
DHR
SH
NH
62”
3”
8”
15 fpm
60 Amp, 230 VAC,
Single Phase
90 PSI Max.
88-1/2”W x 50”H
x 42-1/2”D
62”
3”
8”
15 fpm
60 Amp, 230 VAC,
Single Phase
90 PSI Max.
88-1/2”W x 50”H
x 45-3/4”D
62”
3”
8”
15 fpm
40 Amp, 230 VAC,
Single Phase
90 PSI Max.
88-1/2”W x 50”H
x 41”D
62”
3”
8”
15 fpm
20 Amp, 120 VAC,
Single Phase
90 PSI Max.
88-1/2”W x 50”H
x 41”D
P.O. Box 8563 • Madison, WI 53708
www.aglinc.com
info@aglinc.com
800.276.2664
“The Professional’s Choice”
Encore Maxim
Ultimate Performance.
The Maxim includes the same advanced
features as on the Encore DHR with
many extras to assure faster production,
unlimited settings and increased
versatility. Additional features include:
• Repeatable Tension System Brake
(RTS) - offers consistent film
tension throughout the production
process.
• Pivoting Easy Web In-Feed Table easy access to bottom film supply
shaft.
• Pivoting/Removable Rear Table easy access to finished product
(also roll to roll applications)
SH
NH
Manual Tension
"
"
"
"
Release Liner Wind Up
"
"
"
"
Cantilevered Supply Shaft
"
"
"
"
P/S Overlaminating
"
"
"
"
310° Heated Top Roller
"
"
"
310° Heated Bottom Roller
"
"
Thermal Encapsulation
"
"
Bi-Directional/Reversible
"
"
Silicone Pull Rolls
"
"
1.19”
1.19”
Max. Mounting Thickness
Web Cooling
"
RTS Brake Tension
"
Easy Web In-Feed Table
"
Print Basket
"
Drop Down Rear Table
"
Rear Product Rewind
"
Encore SH
• Print Holder - keeps prints from
touching the floor and getting
dirty prior to being fed into the
laminator.
Advanced Achievement.
• Unique Nip Roller Design - pneumatically
controlled, assures and maintains a uniform
pressure across the entire roll face for quality
production and safe efficient operation.
• Quick Latch Assembly - fast secure docking
of film supply shafts.
Encore DHR
• Temperature, Pressure, Speed Controls - easy
access for the operator, and a foot operated
jog switch for hands free drive operation.
• Advanced Heated Roll Technology - provides
a superior, reliable temperature profile across
the entire roll face so you can achieve
consistent quality product performance.
Exceptional Performance.
Take all of the advantages of the Encore SH,
and add these features to make the DHR:
• Bi-directional Capability - run thermal film
from one side and mount from the other.
• Pull Roll Assembly - pneumatically
controlled, silicone coated for exacting
web tension and easy clean-up.
1.19”
Utilizing a single top heated roller design, the
model SH offers you the ability to run onesided thermal films and pressure-sensitive
overlaminates.
The bottom line is that these advanced
features all work together to give you
peace of mind and a consistent,
quality product time after time.
Encore Series Features ,
Maxim DHR
• Digital Speed Readout - accurate,
repeatable speeds.
• Dial-In Spacer System - maintains
consistent opening at nip for various
substrate thicknesses.
• Easy Access Controls - from both the
front and back of the laminator.
• Chiller Bar - adjustable to manage
print curl.
1.19”
Encore NH
Essential Productivity.
The Encore NH model is a
cold laminator requiring no
heat. It is the perfect choice
for high speed mounting and
overlaminating direct-to-print
vinyl applications.
• Built sturdy, easy to use.
• Proprietary Nip Roll Design - pneumatically controlled, assures
and maintains a uniform pressure across the entire roll face for
the production of consistent, quality products and safe efficient
operation.
• Fast, operator friendly, extremely productive.
“The Professional’s Choice”
Download PDF
Similar pages