Proven Landscape Technology
PRODUCT
CATALOGUE
LANDSCAPE
FORESTRY
CULTIVATION
REMOTE
Contents
2
3
Landscape: Arm Mowers
Bomford
Turner
Proven Landscape Technology
They say there is no substitute for experience, we
at Bomford agree. Pioneering innovative design in
engineering since the late 1800’s, Bomford have
always been the leaders in their field.
Innovation And Durability
From developing labour saving road building machinery after the
Napoleonic wars to the inception and development of the first Arm
Mowers in the late 40’s, right up to the present day state-of-the-art
machinery, we live and breath innovation.
Our latest product catalogue showcases our full range of vegetation
control products that are renowned for their strength in engineering and
product durability.
On-Going Product Development
We are always looking to develop our product range and this year have
expanded our popular range of Flailbot machines (see pages 72 - 83).
From the Mini to the Supreme, our range of remote controlled Flailbot
mowers offer an extremely versatile solution for challenging terrains that
would typically be unsafe for any man-on-board mower.
Microklippa
Wren
Robin
Raven
Osprey
Kestrel Evo ‘E’
Kestrel Evo ‘S’
Kestrel Evo ‘S’ Forward
Kestrel Evo ‘S’ VFA
Kestrel Evo ‘S’ Front Mounted
Hawk Evo
Hawk Evo Forward
Hawk Evo VFA
Falcon Evo
Falcon Evo Forward
Falcon Evo VFA
Falcon Evo Telescopic VFA
Front Mount Range
Buzzard Evo
Buzzard Evo Forward
B71 & B80M
B81.81
Eagle
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
Landscape: Flail Mowers & Toppers
CTVM
Bandit
Raptor
Turbo VM
Turbo Mower
Twin-Blade
Tri-Blade
Tri-Wing
54
55
56
57
58
60
61
62
Forestry
Buccaneer
Buccaneer Excavator
Buccaneer Excavator Mini
Tree Lopper
66
68
70
71
Remote
Flailbot Mini
Flailbot Compact
Flailbot Original
Flailbot Extra
Flailbot Supreme
74
76
78
80
82
Cultivation
Dyna-Drive
86
Fittings & Controls
What’s this thing?
These are QR codes. They are found on the bottom of every product in this brochure. When
you scan them with your smart phone or tablet you will be taken directly to the full product
page on our website. You can download a QR code reader for free from most App Stores.
Heads
Attachments
Flails
Tractor Fittings
Controls
Service & Support
90
92
94
96
98
100
5
4
LANDSCAPE
Arm Mowers
The Bomford Turner range of Arm Mowers
provides a vast choice in both specification
and budget.
Starting from the smallest compact tractor to large watercourse
management models, there is a model for every landscape.
Machines are built to the highest standards in our UK factory
with the utmost care and attention given to ease of control
and operator comfort.
Arm Mower Range
Microklippa
6
Wren
8
Robin
10
Raven
12
Osprey
14
Kestrel Evo ‘E’
16
Kestrel Evo ‘S’
18
Kestrel Evo ‘S’ Forward
20
Kestrel Evo ‘S’ VFA
22
Kestrel Evo ‘S’ Front Mounted
24
Hawk Evo
26
Hawk Evo Forward
28
Hawk Evo VFA
30
Falcon Evo
32
Falcon Evo Forward
34
Falcon Evo VFA
36
Falcon Evo Telescopic VFA
38
Front Mount Range
40
Buzzard Evo
42
Buzzard Evo Forward
44
B71M & B80M
46
B81.81
48
Eagle
50
7
6
Product Specification
Microklippa
The Microklippa is very popular with estate
managers and horticulturists who admire the
Microklippa’s fine cutting capabilities when
hedge trimming and the versatility of the right
or left hand cutting.
Standard
3.2m
(10’5”)
3.5m
(11’5”)
15hp
15hp
550kg / 1213lbs
550kg / 1213lbs
Microklippa
Tractor requirements
Minimum weight
Ideal for trimming ornamental
and standard hedgerows up to
20mm thick.
Microklippa
3.2m
(10’5”)
3.5m
(11’5”)
Telescopic arm
Telescopic arm stroke
Base unit mounting options
Power slew
Front mount
Power slew angle
Mid-mount
Gravity breakout
Rear mount
Hydraulic breakout
Three point linkage (CAT II)
Armfloat - manual
Axle bracket
Armfloat - electronic
Headfloat - manual
Overall machine parameters
Machine weight with head and oil
192kg / 423lbs
Capacity of oil tank
201kg / 443lbs
Headfloat - electronic
Left hand cutting
Right hand cutting
Controls
The Microklippa can be used on a range of power units from small
compact tractors to small pivot steer loaders, in conjunction with
a front mount kit.
Not Available
Arm features and main frame
Minimum horse power
Cutter Bar
Optional
Left and right hand cutting
Cable control (CC)
Cutting heads
Electronic proportional control (EPP)
Rotary Heads
Intelligent control system (ICS)
1.2m and 1.5m cutterbars
Low pressure hydraulics (LPH)
Ditch Cleaner
Cable rotor reverse
Electronic rotor reverse
Key Features
• 3.2m or 3.5m reach
• Left or Right hand cutting
(swing over capability)
• Cable or Electronic Proportional
Controlled (EPC) options
• Front mount option and
16-22 litres per minute
Small but flexible
Impressive reach characterisics
for a compact machine.
Auto swingover latch
To operate fully extend second
arm, allowing single operation
from left to right.
Working Reach
Head used for calcs: 1.2m Cutterbar
Want to know more about
the Microklippa range?
Microklippa
3.2m (10’5”)
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/microklippa/
Gravity breakout
To protect tractor and machine
when cutting.
Microklippa
3.5m (11’5”)
A
3.10m /10’2”
3.4m / 11’2”
B
3.20m / 10’6”
3.50m / 11’6”
C
2.00m / 6’6”
2.30m / 7’7”
D
3.10m / 10’2”
3.50m / 11’6”
4.50m / 14’9”
E
4.20m / 13’9”
X
1.0m / 3’4”
1.00m / 3’4”
Y
1.34m / 4’7”
1.34m / 4’7”
9
8
Product Specification
Wren
Compact yet powerful, the Wren is the latest
addition to the range of arm mowers from
Bomford Turner and offers an excellent
entry-level solution to your landscaping
maintenance needs.
Standard
3.0m
(9’10”)
3.5m
(11’5”)
15hp
15hp
800kg/1764lbs
800kg/1764lbs
Wren
Tractor requirements
Minimum weight
Fitted as standard. Ideal for
cutting both brush and grass.
Power slew angle
Mid-mount
Gravity breakout
Rear mount
Hydraulic breakout
Three point linkage (CAT II)
Armfloat - manual
Axle bracket
Armfloat - electronic
Headfloat - manual
Overall machine parameters
Machine weight with head and oil
192kg/423lbs
201kg/448lbs
Capacity of oil tank
60L / 15.6USG
60L / 15.6USG
0.8m Flailhead
Rotary Heads
Cable rotor reverse
1.2m and 1.5m cutterbars
Electronic rotor reverse
Ditch Cleaner
Hydraulic System
System capability
Pump flow rate
30hp
30hp
50L / 13.2USG
50L / 13.2USG
Pump type (Gear / Piston / Helical)
Gear
Gear
Pump arrangement (Twin / Tandem Inline)
Twin
Twin
• Front or rear mount option
Oil cooler
Independent hydraulics
For continuous use. Twin pumps
with separate oil tank.
Working Reach
Head used for calcs: 0.6m Flail Head
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/wren/
Multi-purpose flails
For grass and hedges.
Gravity breakout system
For protecting drive and machine
during operation.
Fully independent
hydraulics
Want to know more about
the Wren range?
Right hand cutting
0.6m Flailhead
• Cable control
• Cutter bar option
Left hand cutting
Cutting heads
Low pressure hydraulics (LPH)
• Mechanical breakout
Headfloat - electronic
Left and right hand cutting
Intelligent control system (ICS)
• Left or Right hand cutting option
3.5m
(11’5”)
Telescopic arm stroke
Power slew
Electronic proportional control (EPP)
• 3.0m or 3.5m reach
3.0m
(9’10”)
Telescopic arm
Front mount
Cable control (CC)
Key Features
Wren
Base unit mounting options
Controls
Fitted with twin pumps and fully independent hydraulics,
the Wren can operate a range of different attachments.
Not Available
Arm features and main frame
Minimum horse power
Cable rotor reverse
Optional
Wren
3.0m (9’10”)
Wren
3.5m (11’5”)
A
2.8m / 9’2”
3.3m / 10’10”
B
2.8m / 9’2”
3.3m / 10’10”
C
1.7m / 5’7”
2.2m / 7’3”
D
1.55m / 5’1”
1.8m / 5’11”
3.5m / 11’6”
E
3.0m / 9’11”
X
1.0m / 3’3”
1.0m / 3’3”
Y
0.7m / 2’4”
0.7m / 2’4”
11
10
Product Specification
Robin
The Robin is a professional compact Arm mower
- perfect for amenity and estate use and also a
firm favourite with small farmers as it can verge
mow or hedge trim just as well as some of our
larger models.
Standard
3.4m
(11’2”)
4.3m
(14’2”)
30-40hp
30-40hp
1300kg / 2866lbs
1500kg / 3307lbs
Robin
Tractor requirements
Minimum weight
Fitted as standard this protects
both machine and driver.
Power slew angle
Mid-mount
Gravity breakout
Rear mount
Hydraulic breakout
Three point linkage (CAT II)
Armfloat - manual
Axle bracket
Armfloat - electronic
Headfloat - manual
Overall machine parameters
594kg / 1310lbs
Weight of machine with oil but without head
670kg / 1477lbs
80L / 21.1USG
80L / 21.1USG
464kg / 1023lbs
530kg / 1168lbs
Controls
Rotary head
Cutting heads (For Flail compatibility see page 95)
Electronic rotor reverse
905mm flail head with 102mm roller
System capability
Pump flow rate
30hp
30hp
50L / 13.2USG
50L / 13.2USG
• Hydraulic breakout on second arm standard
Gear
Gear
Pump arrangement (Twin / Tandem Inline)
Twin
Twin
• End drive cutting head or cutter bar
Independent hydraulics
• Front mount option
• Low friction cable control
For continuous use. Twin pumps
with separate oil tank.
Accessories
Road lights
Debris blower
Warning arrow - Magnetic
Cab guard kit
Working Reach
Head used for calcs: 905mm
Want to know more about
the Robin range?
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/robin/
Front mounted option
Fitting kits available for various
prime movers. Contact for details.
1000mm flail head with 102mm roller
1.2m and 1.5m cutterbars
Reach options
There are 2 reach options available
with this machine - 3.4m and 4.3m.
Oil cooler
Fully independent
hydraulics
Arm attachments available
Ditch cleaner
Cable rotor reverse
Pump type (Gear / Piston / Helical)
• Electronic Proportional Controlled
(EPC) optional
Right hand cutting
Pro-Saw
Intelligent control system (ICS)
Hydraulic System
Left hand cutting
Sheartrim cutter bar
Electronic proportional control (EPP)
• 3.4m or 4.3m reach
Headfloat - electronic
Variable track bracket (VTB)
Cable control (CC)
Key Features
4.3m
(14’2”)
Telescopic arm stroke
Power slew
Low pressure hydraulics (LPH)
3.4m
(11’2”)
Telescopic arm
Front mount
Capacity of oil tank
• Parallel linkage as standard
Robin
Base unit mounting options
Machine weight with head and oil
The Robin has many variants, and is available as front mount,
along with small wheel loader and skid steer options.
Not Available
Arm features and main frame
Minimum horse power
Hydraulic breakout
Optional
Robin
3.4m (11’2”)
Robin
4.3m (14’2”)
A
3.4m / 11’2”
4.3m / 14’2”
B
3.0m / 9’10”
4.0m / 13’2”
C
1.98m / 6’6”
2.98m / 9’10”
D
3.3m / 10’10”
4.3m / 14’2”
E
4.3m / 14’11”
5.3m /17’5”
X
1.0m / 3’4m
1.0m / 3’4”
Y
1.34m / 4’7”
1.34m / 4’7’
13
12
Product Specification
Raven
The Raven is a rear mounted Arm mower designed
to meet the demands of smaller agricultural,
horticultural, landscape & amenity customers.
The rugged design ensures excellent
performance for a small, compact machine
and is suitable for any tractor over 40HP.
4.7m
(15’8”)
45hp
45hp
1800kg / 3968lbs
2000kg / 4409lbs
Tractor requirements
Minimum weight
Rugged design
With oversized arms this machine
is perfect for cutting grass.
Telescopic arm
Telescopic arm stroke
Rear mount
Power slew
Three point linkage (CAT II)
Power slew angle
Axle bracket
Gravity breakout protection
Hydraulic breakout protection
640kg / 1411lbs
680kg/1499lbs
Capacity of oil tank
130L / 34.3USG
130L / 34.3USG
Weight of machine with oil but without head
480kg / 1058lbs
530kg/1168lbs
Sheartrim cutter bar
Pro-Saw
Cable rotor reverse
Ditch cleaner
Electronic rotor reverse
Rotary head
Hydraulic System
System capability
45hp
45hp
74L / 19.5USG
74L / 19.5USG
Pump type (Gear / Piston / Helical)
Gear
Gear
Pump arrangement (Twin / Tandem Inline)
Twin
Twin
Pump flow rate
Independent hydraulics
Oil cooler
Accessories
Road lights
Debris blower
Warning arrow - Magnetic
Cab guard kit
• Tubular 3 point linkage kit
Working Reach
Head used for calcs: 905mm
For continuous use. Twin pumps
with separate oil tank.
Left hand cutting
Variable track bracket (VTB)
Intelligent control system (ICS)
Independent hydraulics
Head angle float
Arm attachments available
Electronic proportional control (EPP)
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/raven/
Armfloat - electronic operation
Left and right hand cutting
Electronic Switch Control (ESC)
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Armfloat - manual operation
Right hand cutting
Low pressure hydraulics (LPH)
Want to know more about
the Raven range?
4.7m
(15’8”)
Folding forward arm
Mid-mount
Cable Control (CC)
• Choice of flails
4.0m
(13’2”)
Fixed forward arm
Variable folding arm
Controls
• Cable Control with Low Pressure
Hydraulics optional
Raven
Front mount
Machine weight with head and oil
Reduced weight makes the
Raven compatible with
smaller tractors.
Not Available
Base unit mounting options
Overall machine parameters
Integral tank mainframe
Optional
Arm features and main frame
Minimum horse power
Key Features
• Direct drive cutting head or cutter bar
4.0m
(13’2”)
Raven
With a choice of 4.0m or 4.7m reach, and the familiar cable lever
control the Raven can also be fitted with the popular LPH “Low
Pressure Hydraulic” Joystick, which gives proportional control
of the arm and switch control of the head angle. Arm float
functions are available via buttons on the rear of the stick
allowing ultimate control when operating the machinery,
whether hedge cutting or verge mowing.
• Choice of 4.0m or 4.7m reach
Standard
Raven
4.0m (13’2”)
Raven
4.7m (15’8”)
A
4.0m / 13’2”
4.7m / 15’8”
B
3.52m / 11’7”
4.24m / 14’
C
2.51m / 8’3”
3.17m / 10’5”
D
2.77m / 9’1”
3.38m / 11’1”
E
4.12m / 13’6”
4.81m / 15’9”
X
1.0m / 3.4m
1.0m / 3.4m
Y
1.34m / 4’7”
1.34m / 4’7”
Cutting heads (For Flail compatibility see page 95)
950mm head with 102mm roller
1007mm head with 102mm roller
1107mm head with 115mm roller
1.5m sheartrim cutterbar
Gravity breakout
For machine and
operator safety.
15
14
Product Specification
Osprey
The Osprey is the perfect choice for the small
scale and co-operative agricultural markets. This
economic entry level machine would also be of
interest to sports and amenity managers.
4.5m
(14’9”)
5.0m
(16’5”)
70hp
75hp
2300kg / 5070lbs
2500kg / 5512lbs
Osprey
Tractor requirements
Minimum weight
Hydraulic slew & breakout
110° of slew and hydraulic
breakout makes the Osprey
very adaptable.
With a choice of 4.5m or 5.0m reach, with an impressive 110
degrees of power slew and hydraulic breakout as standard, the
Osprey is ideal where access is a challenge to the operator. The
mainframe of the machine is close coupled to the tractor and
this allows the machine to be fitted to smaller tractors than
most other competitor models on the market.
• 4.5 or 5.0m reach
• Choice of heads
Telescopic arm
Telescopic arm stroke
Rear mount
Power slew
Three point linkage (CAT II)
Power slew angle
Axle bracket
Gravity breakout protection
820kg / 1808lbs
860kg/1896lbs
Capacity of oil tank
130L / 34.3USG
130L / 34.3USG
Weight of machine with oil but without head
700kg / 1543lbs
740kg/1632lbs
Pro-Saw
Ditch cleaner
Rotary head
45hp
45hp
74L / 19.5USG
74L / 19.5USG
Pump type (Gear / Piston / Helical)
Gear
Gear
Pump arrangement (Twin / Tandem Inline)
Twin
Twin
Pump flow rate
Independent hydraulics
950mm head with 102mm roller
1000mm head with 102mm roller
Compact transport
1257mm head with 102mm roller
As a result of the 110°power slew
the Osprey has a compact
inline transport position.
1257mm head with 150mm roller
1.5m sheartrim cutterbar
Accessories
Road lights
Debris blower
Warning arrow - Magnetic
• Three point linkage mounted
Working Reach
Head used for calcs: 950mm
Giving a larger range of
head movement.
Cutting heads (For Flail compatibility see page 95)
1107mm head with 115mm roller
Oil cooler
Cab guard kit
Adjustable cowl linkage
Left hand cutting
Sheartrim cutter bar
System capability
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/osprey/
Head angle float
Variable track bracket (VTB)
Hydraulic System
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Armfloat - electronic operation
Arm attachments available
Electronic rotor reverse
Osprey
4.5m (14’9”)
Armfloat - manual operation
Left and right hand cutting
Cable rotor reverse
Want to know more about
the Osprey range?
110°
Right hand cutting
Intelligent control system (ICS)
• Hydraulic breakout protection
110°
Hydraulic breakout protection
Overall machine parameters
Electronic proportional control (EPP)
• 110° power slew
5.0m
(16’5”)
Folding forward arm
Mid-mount
Electronic Switch Control (ESC)
• Low friction cable or LPH
4.5m
(14’9”)
Fixed forward arm
Variable folding arm
Low pressure hydraulics (LPH)
For uncoupling the machine
on a variety of surfaces safely.
Osprey
Front mount
Cable Control (CC)
Secure adjustable
parking stands
Not Available
Base unit mounting options
Controls
Arm attachments can include a choice of flail heads for
control of grass, hedges and light brush along with the
Sheartrim cutter bar or Pro-Saw attachments for control of
heavier brush.
Optional
Arm features and main frame
Minimum horse power
Machine weight with head and oil
Key Features
Standard
Osprey
5.0m (16’5”)
A
4.55m / 14’11”
5.0m / 16’5”
B
4.33m / 14’2”
4.8m / 15’9”
C
2.3m / 7’6”
2.8m / 9’6”
D
3.7m / 12’1”
4.2m / 13’9”
E
4.7m / 15’5”
5.2m / 17”
X
1.0m / 3’4”
1.0m / 3’4”
Y
1.34m / 4’7”
1.34m / 4’7”
17
16
Product Specification
Kestrel Evo ‘E’
The Kestrel Evo ‘E’ hedge trimmer and verge
mower, with a 5m reach and a choice of flail heads
or a 1.5m sheartrim cutterbar, is perfect for the
farmer who needs professional features and
robust design, offering real value for money.
5.0m P
(16’5”)
50hp
50hp
3000kg / 6614lbs
3000kg / 6614lbs
Tractor requirements
Minimum weight
Mechanical breakout
For machine and operator safety.
Telescopic arm
Telescopic arm stroke
Rear mount
Power slew
Three point linkage (CAT II)
Power slew angle
Axle bracket
Gravity breakout protection
Hydraulic breakout protection
920kg / 2028lbs
1000kg/2505lbs
Capacity of oil tank
160L / 42.3USG
160L / 42.3USG
Weight of machine with oil but without head
720kg / 1587lbs
800kg/1764lbs
A choice of flail heads for control of grass, hedges and light
brush. Upgrade options to the Pro-Trim series of cutting
head and heavy duty Truecut flail are available.
Sheartrim cutter bar
Pro-Saw
Cable rotor reverse
Ditch cleaner
Electronic rotor reverse
Rotary head
System capability
45hp
45hp
74L / 19.5USG
74L / 19.5USG
Pump type (Gear / Piston / Helical)
Gear
Gear
Pump arrangement (Twin / Tandem Inline)
Twin
Twin
Pump flow rate
Independent hydraulics
Accessories
Road lights
Debris blower
Warning arrow - Magnetic
Cab guard kit
• Cat II three point linkage mounted
Working Reach
Head used for calcs: 1.2 Pro-Trim
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/kestrel-evo-e/
240° cowl
bracket linkage
For a greater angle range.
Cutting heads (For Flail compatibility see page 95)
1257mm head with 102mm roller
1257mm head with 150mm roller
Parallel arm options
1.2m Pro-Trim head with 115mm roller
Available for ease of operation
when hedge cutting.
1.2m Pro-Trim head with 150mm roller
1.5m Sheartrim cutterbar
Oil cooler
Kestrel Evo ‘E’
5.0m (16’5”)
Left hand cutting
Variable track bracket (VTB)
Intelligent control system (ICS)
Want to know more about
the Kestrel Evo ‘E’ range?
Head angle float
Arm attachments available
Electronic proportional control (EPP)
• Mechanical breakout protection
Armfloat - electronic operation
Left and right hand cutting
Electronic Switch Control (ESC)
• Non parallel or Parallel linkage options
Armfloat - manual operation
Right hand cutting
Low pressure hydraulics (LPH)
• Twin Pump independent hydraulics
5.0m P
(16’5”)
Folding forward arm
Mid-mount
Hydraulic System
5.0m
(16’5”)
Fixed forward arm
Variable folding arm
Cable Control (CC)
• Choice of flail heads or 1.5m cutter bar
Kestrel Evo ‘E’
Front mount
Machine weight with head and oil
Can be fitted in rear panel.
Not Available
Base unit mounting options
Overall machine parameters
Optional oil cooler
Optional
Arm features and main frame
Minimum horse power
Controls
• 5m reach options
5.0m
(16’5”)
Kestrel Evo ‘E’
A well designed, and cost effective machine, with mechanical
breakout and cable controls as standard, the Kestrel Evo ‘E’
is the perfect model for small scale farmers and infrequent
users. Very popular with dairy farmers who wish to maintain
stock boundary hedges and water courses with hassle free
operation and economic cost.
Key Features
Standard
Kestrel Evo ‘E’
5.0m P (16’5”)
A
5.06m / 16’7”
4.96m / 16’3”
B
4.97m / 16’4”
5.13m / 16’10”
C
3.63m / 11’11”
3.31m / 10’10”
D
4.05m / 13’3”
4.32m / 14’2”
E
5.98m / 19’7”
5.99m / 19’8”
X
1.00m / 3’4”
1.00m / 3’4”
Y
1.34m / 4’7”
1.34m / 4’7”
19
18
Product Specification
Kestrel Evo ‘S’
Kestrel Evo ‘S’
5.0m
(16’5”)
5.0m P
(16’5”)
5.7m
(18’8”)
5.7m P
(18’8”)
50hp
50hp
60hp
60hp
3000kg
6614lbs
3000kg
6614lbs
3500kg
7716lbs
3500kg
7716lbs
Tractor requirements
Minimum horse power
Minimum weight
The Kestrel Evo ‘S’ has been designed to provide
significant reach for farmers who need to keep
weight in mind whilst retaining the versatile
features of a more expensive machine.
Standard
Power slew and
hydraulic breakout
For driver and machine safety.
These features include integral road lighting, tubular 3 point
linkage and power slew with hydraulic breakout.
Not Available
Kestrel Evo ‘S’
5.0m
(16’5”)
5.0m P
(16’5”)
5.7m
(18’8”)
5.7m P
(18’8”)
94°
94°
94°
94°
Arm features and main frame
Forward arm
Telescopic arm
Telescopic arm stroke
Base unit mounting options
Power slew
Front mount
Power slew angle
Mid-mount
Gravity breakout protection
Rear mount
Hydraulic breakout protection
Three point linkage (CAT II)
Head float - manual operation
Axle bracket
Head float - electronic operation
Sub Frame
Left hand cutting
Yoke
Right hand cutting
Left and right hand cutting
Overall machine parameters
Key Features
Optional
Machine weight with head and oil
1180kg
2601lbs
1180kg
2601lbs
1210kg
2268lbs
1210kg
2268lbs
Arm attachments available
Capacity of oil tank
160L
42.3USG
160L
42.3USG
160L
42.3USG
160L
42.3USG
Sheartrim cutter bar
Weight of machine with oil but
without head
940kg
2072lbs
940kg
2072lbs
970kg
2139lbs
970kg
2139lbs
Ditch cleaner
Variable track bracket (VTB)
Pro-Saw
Controls
Rotary head
Cable Control (CC)
Accessories
• Parallel arm option
Low pressure hydraulics (LPH)
Road lights
Debris blower
• Front mount option
Electronic proportional control (EPP)
Intelligent control system (ICS)
Warning arrow - Magnetic
Cable rotor reverse
Cab guard kit
Electronic rotor reverse
Cutting heads (For Flail compatibility see page 95)
Non parallel arm options
Hydraulic System
1.2m Pro-Trim with 115/150mm roller
Available at request.
• 5m or 5.7m reach
• Choice of flails, heads and cutter bars
• Power slew
• Forward arm option
System capability
Pro Trim top drive
motor head
Fitted as standard.
54hp
54hp
54hp
54hp
88L
23.2USG
88L
23.2USG
88L
23.2USG
88L
23.2USG
Pump type (Gear / Piston / Helical)
Gear
Gear
Gear
Gear
Pump arrangement (Twin / Tandem Inline)
Twin
Twin
Twin
Twin
Pump flow rate
Independent hydraulics
Oil cooler
Working Reach
Head used for calcs: 1.2 Pro-Trim
Want to know more about
the Kestrel Evo ‘S’ range?
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/kestrel-evo-s/
Road lights
Fitted as standard.
Kestrel Evo ‘S’
5.0m (16’5”)
Kestrel Evo ‘S’
5.0m P (16’5”)
Kestrel Evo ‘S’
5.7m (18’8”)
Kestrel Evo ‘S’
5.7m P (18’8”)
A
5.05m / 16’7”
4.87m / 15’12”
5.7m / 18’8”
5.7m / 18’8”
B
5.16m / 16’11”
4.94m / 16’3”
5.9m / 19’4”
5.87m / 19’3”
4.08m / 13’5”
C
3.30m / 10’10”
3.30m / 10’10”
3.86m / 12’8”
D
4.42m / 16’6”
3.97m / 13’
5.1m / 16’9”
4.77m / 15’8”
E
6.40m /20’11”
5.62m / 18’5”
7.11m / 23’4”
6.45m / 21’2”
X
1.3m /4’1”
1.3m /4’1”
1.3m /4’1”
1.3m /4’1”
Y
1.0m /3’4”
1.0m /3’4”
1.0m /3’4”
1.0m /3’4”
1.2m Pro-Trim ISMP with
115/150mm roller
21
20
Product Specification
Kestrel Evo ‘S’
Forward
The ideal choice for the operator with limited
tractor size, but requiring the versatility and
viewing position of a forward arm.
Standard
4.5m
(14’10”)
5.0m
(16’5”)
50hp
50hp
3000kg / 6614lbs
3000kg / 6614lbs
Kestrel Evo ‘S’ FWD
Tractor requirements
Minimum weight
Can be fitted in rear panel.
Telescopic arm stroke
Mid-mount
Power slew
Rear mount
Power slew angle
Three point linkage (CAT II)
Gravity breakout protection
Axle bracket
Hydraulic breakout protection
Sub Frame
Arm float - manual operation
Yoke
Arm float - electronic operation
1180kg / 2601lbs
1180kg / 2601lbs
Capacity of oil tank
160L / 42.3USG
160L / 42.3USG
Weight of machine with oil but without head
940kg / 2072lbs
940kg / 2072lbs
• Power slew
54hp
88L / 23.2USG
88L / 23.2USG
Pump type (Gear / Piston / Helical)
Gear
Gear
Pump arrangement (Twin / Tandem Inline)
Twin
Twin
For ease of operation, forward
reach of 600mm / 2’.
Road lights
Debris blower
Reach great heights
Warning arrow - Magnetic
With forward positioning and two
reach options of 4.5m and 5.0m.
Cab guard kit
Cutting heads (For Flail compatibility see page 95)
Oil cooler
1.2m Pro-Trim with 115/150mm roller
1.2m Pro-Trim ISMP with
115/150mm roller
Kestrel Evo ‘S’
Forward 4.5m
(14’10”)
Kestrel Evo ‘S’
Forward 5.0m
(16’5”)
A
4.53m / 14’10”
4.97m / 16’4”
B
4.64m / 15’3
5.07m / 16’8”
C
2.64m /8’8”
3.23m /10’7”
D
4.05m / 13’3”
4.48m / 14’8”
Want to know more about
the Kestrel Evo ‘S’ Forward?
Forward visibility
Left and right hand cutting
Independent hydraulics
Head used for calcs: 1.2 Pro-Trim
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/kestrel-evo-s-forward/
Right hand cutting
Accessories
54hp
Working Reach
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Left hand cutting
Rotary head
Pump flow rate
Fitted as standard with
top drive motor.
Head float - electronic operation
Ditch cleaner
System capability
Pro-Trim head
94°
Pro-Saw
Electronic rotor reverse
• Choice of flails, heads and cutter bars
94°
Sheartrim cutter bar
Intelligent control system (ICS)
Hydraulic System
600mm /2’
Variable track bracket (VTB)
Electronic proportional control (EPP)
• Forward arm option
600mm / 2’
Arm attachments available
Low pressure hydraulics (LPH)
Cable rotor reverse
5.0m
(16’5”)
Head float - manual operation
Machine weight with head and oil
Cable Control (CC)
• Parallel arm option
Forward arm reach (Fixed / Variable)
Front mount
• 4.5m and 5m reach
4.5m
(14’10”)
Forward arm
Telescopic arm
Controls
Key Features
Kestrel Evo ‘S’ FWD
Base unit mounting options
Overall machine parameters
These features include integral road lighting, tubular 3 point
linkage and power slew with hydraulic breakout.
Not Available
Arm features and main frame
Minimum horse power
Optional oil cooler
Optional
E
5.83m / 19’2”
6.33m / 20’9”
X
1.33m / 4’1”
1.33m / 4’1”
Y
1.0m / 3’4”
1.0m / 3’4”
23
22
Product Specification
Kestrel Evo
‘S’ VFA
The ever popular VFA variable forward arm is
now available in the compact yet powerful
Kestrel ‘S’ range.
Kestrel Evo ‘S’ VFA
Standard
5.0m
(16’5”)
Tractor requirements
Minimum horse power
Low profile tank
Aids driver visibility.
3000kg / 6614lbs
Power slew
Mid-mount
Power slew angle
Rear mount
Gravity breakout protection
Three point linkage (CAT II)
Hydraulic breakout protection
Axle bracket
Arm float - manual operation
Sub Frame
Arm float - electronic operation
Yoke
Head float - manual operation
1180kg /2601lbs
Capacity of oil tank
160L / 42.3USG
Weight of machine with oil but without head
940kg / 2072lbs
Left and right hand cutting
Arm attachments available
Pro-Saw
Ditch cleaner
Intelligent control system (ICS)
Cable rotor reverse
• Parallel arm option
Hydraulic System
Rotary head
Accessories
Electronic rotor reverse
Road lights
System capability
54hp
Pump flow rate
Fitted as standard.
Right hand cutting
Sheartrim cutter bar
Electronic proportional control (EPP)
LED road lighting
Left hand cutting
Variable track bracket (VTB)
• 5m reach
• Debris blower option
94°
Head float - electronic operation
Machine weight with head and oil
Low pressure hydraulics (LPH)
• Power slew
1200mm / 3’11”
Telescopic arm
Telescopic arm stroke
Cable Control (CC)
• Choice of flails, heads and cutter bars
Forward arm
Front mount
Controls
Key Features
5.0m
(16’5”)
Kestrel Evo ‘S’ VFA
Base unit mounting options
Overall machine parameters
Features include integral road lighting, tubular 3 point linkage
and power slew with hydraulic breakout.
Not Available
Arm features and main frame
50hp
Minimum weight
Optional
88L / 19.4USG
Pump type (Gear / Piston / Helical)
Gear
Pump arrangement (Twin / Tandem Inline)
Twin
Debris blower
Warning arrow - Magnetic
Clear visibility
Cab guard kit
Variable forward reach brings
cutting head into drivers view.
Cutting heads (For Flail compatibility see page 95)
Independent hydraulics
1.2m Pro-Trim with 115/150mm roller
Oil cooler
1.2m Pro-Trim ISMP with 115/150mm roller
1.5m Pro-Trim with 115/150mm roller
Working Reach
Head used for calcs: 1.2 Pro-Trim
Want to know more about
the Kestrel Evo ‘S’ VFA?
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/kestrel-evo-s-vfa/
Powerful 74hp hydraulics
For continuous use. Twin pumps
with separate oil tank.
Side Reach
Forward Reach
Kestrel Evo ‘S’ VFA 5.0M (16’5”)
Kestrel Evo ‘S’ VFA 5.0M (16’5”)
A
5.08m / 16’8”
A
5.08m / 16’8”
B
4.80m / 15’9”
F
4.96m / 17’8”
5.0m / 16’4”
C
4.94m / 16’2”
G
D
4.49m / 14’9”
H
1.2m / 3’11”
E
5.66m / 18’7”
J
0.56m / 1’10”
X
1.35m /4’5”
Y
1.0m /3’4”
25
24
Product Specification
Kestrel Evo ‘S’
Front Mounted
The Kestrel Evo ‘S’ Front Mounted offers a
dedicated designed front mounted machine,
fitted with hydraulic break out and power
slew as standard.
Kestrel Evo ‘S’ FM
Standard
5.0m
(16’5”)
Tractor requirements
Minimum horse power
Low profile tank
Aids driver visibility.
3000kg / 6614lbs
Telescopic arm stroke
Mid-mount
Power slew
Rear mount
Power slew angle
Three point linkage (CAT II)
Gravity breakout protection
Axle bracket
Hydraulic breakout protection
Sub Frame
Arm float - manual operation
Yoke
Arm float - electronic operation
1180kg /2601lbs
Capacity of oil tank
160L / 42.3USG
Weight of machine with oil but without head
940kg / 2072lbs
Key Features
Intelligent control system (ICS)
• 5.0m reach
Hydraulic System
Pro-Saw
Ditch cleaner
Accessories
60hp
Pump flow rate
104L / 27.5USG
Pump type (Gear / Piston / Helical)
Gear
Pump arrangement (Twin / Tandem Inline)
Twin
Road lights
Debris blower
ICS Control system
Warning arrow - Magnetic
For ease of use and mounting.
Cab guard kit
Independent hydraulics
Cutting heads (For Flail compatibility see page 95)
Oil cooler
1.2m Pro-Trim with 115/150mm roller
1.2m Pro-Trim ISMP with 115/150mm roller
Fitted as standard.
1.5m Pro-Trim with 115/150mm roller
Working Reach
Head used for calcs: 1.2 Pro-Trim
Want to know more about
the Kestrel Evo ‘S’ Front
Mounted range?
Kestrel Evo ‘S’ Front Mounted
5.0M (16’5”)
A powerful 104 litre system
creating 60hp.
Left and right hand cutting
Rotary head
System capability
Covered hydraulics
Right hand cutting
Sheartrim cutter bar
Electronic rotor reverse
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/kestrel-evo-s-front-mounted/
Left hand cutting
Variable track bracket (VTB)
Cable rotor reverse
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Head float - electronic operation
Arm attachments available
Low pressure hydraulics (LPH)
Forward facing
road lights
94°
Head float - manual operation
Machine weight with head and oil
Electronic proportional control (EPP)
• Power slew
Forward arm reach (Fixed / Variable)
Telescopic arm
Cable Control (CC)
• Choice of flails, heads and cutter bars
5.0m
(16’5”)
Forward arm
Front mount
Controls
• Front mount option
Kestrel Evo ‘S’ FM
Base unit mounting options
Overall machine parameters
These features include integral road lighting, tubular 3 point
linkage and power slew with hydraulic breakout.
Not Available
Arm features and main frame
50hp
Minimum weight
Optional
A
5.05m / 16’7”
B
5.16m / 16’11”
C
3.30m / 10’10”
D
4.42m / 14’6”
E
6.40m / 21’
X
1.3m /4’1”
Y
1.0m /3’4”
27
26
Product Specification
Hawk Evo
Hawk Evo
Fitted with a powerful 104 litre drive system, and options to upgrade
to 125 litre, the Hawk Evo offers a machine for every application.
5.4m P
(17’9”)
6.0m P
(19’8”)
6.5m P
(21’4”)
65hp
65hp
65hp
3000kg
6614lbs
3250kg
7165lbs
3500kg
7716lbs
Tractor requirements
Fully enclosed
hydraulics
Keeping components
protected.
Key Features
• 5.4m, 6.0m or 6.5m reach
Not Available
Hawk Evo
Power slew
Power slew angle
Mid-mount
Gravity breakout protection
Rear mount
Hydraulic breakout protection
Three point linkage (CAT II)
Arm float - manual operation
Axle bracket
Arm float - electronic operation
1490kg
3285lbs
1740kg
3836lbs
Capacity of oil tank
180L
47.6USG
180L
47.6USG
200L
52.8USG
Right hand cutting
Weight of machine with oil but without
head
1100kg
2425lbs
1250kg
2756lbs
1500kg
3307lbs
Arm attachments available
94°
94°
Left hand cutting
Left and right hand cutting
Variable track bracket (VTB)
• 125 l/min option on 6.5m model
•94º of slew (max non parallel systems)
Intelligent control system (ICS)
Pro-Saw
Ditch cleaner
Electronic proportional control (EPP)
Rotary head
Accessories
Cable rotor reverse
Road lights
Electronic rotor reverse
Debris blower
Hydraulic System
System capability
Warning arrow - Magnetic
60hp
60hp
65hp
104L
27.5USG
104L
27.5USG
125L
33USG
Pump type (Gear / Piston / Helical)
Gear
Gear
Gear
1.2m Pro-Trim with 115/150mm roller
Oil cooler
Pump arrangement (Twin / Tandem Inline)
Twin
Twin
Twin
Standard on all models (cable
controls as an option).
Independent hydraulics
1.2m Pro-Trim ISMP with
115/150mm roller
Oil cooler
1.5m Pro-Trim with 115/150mm roller
Pump flow rate
Working Reach
Head used for calcs: 1.2 Pro-Trim
Fitted as standard.
94°
Sheartrim cutter bar
Low pressure hydraulics (LPH)
Road lights
900mm
3’
Head float - electronic operation
Machine weight with head and oil
1340kg
2954lbs
• 104 l/min independent hydraulic system
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/hawk-evo/
6.5m P
(21’4”)
Head float - manual operation
Overall machine parameters
Cable Control (CC)
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
6.0m P
(19’8”)
Telescopic arm stroke
Front mount
Hawk Evo
5.4m P
(17’9”)
Hawk Evo
6.0m P
(19’8”)
A
5.35m / 17’7”
5.95m / 19’6”
6.47m / 21’3”
B
5.39m / 17”8”
6.11m / 20’1”
6.21m / 20’11”
4.68m / 15’4”
Want to know more about
the Hawk Evo range?
5.4m P
(17’9”)
Telescopic arm
Base unit mounting options
Controls
• 1.2m Pro-Trim head - 1.5m option on 5.4m & 6.5m
Optional
Arm features and main frame
Minimum horse power
Minimum weight
The Hawk Evo is perfect for farmers, contractors
and municipal environments.
Standard
Hawk Evo
6.5m P
(21’4”)
C
3.64m / 11’11”
4.32m / 14’2”
D
4.25m / 13’11”
4.74m / 15’7”
4.97m / 16’4”
E
5.89m /19’4”
6.39m / 21’
6.62m / 21’9”
X
1.35m /4’5”
1.35m /4’5”
1.35m /4’5”
Y
1.0m /3’4”
1.0m /3’4”
1.0m /3’4”
Cab guard kit
Cutting heads (For Flail compatibility see page 95)
Slimline compact
transport position
Keeping weight closer to tractor
for faster road speeds.
29
28
Product Specification
Hawk Evo
Forward
The Hawk Evo Forward arm is perfect
for farmers, contractors and municipal
environments where the added benefits of a
forward arm is required to improve visibility
and minimise operator stress and fatigue.
Hawk Evo FWD
5.4m
(17’9”)
6.0m
(19’8”)
65hp
70hp
Tractor requirements
Minimum weight
Folding second arm
Hydraulic arm folds to create a
narrow width to aid transport.
3500kg / 7716lbs 4000kg / 8819lbs
Power slew angle
Gravity breakout protection
Rear mount
Hydraulic breakout protection
Three point linkage (CAT II)
Arm float - manual operation
Axle bracket
Arm float - electronic operation
1640kg /3616lbs
1740kg/3836lbs
200L / 53USG
200L / 53USG
1400kg/3086lbs
1500kg/3307lbs
Controls
60hp
60hp
104L / 27.5USG
104L / 27.5USG
Pump type (Gear / Piston / Helical)
Gear
Gear
Pump arrangement (Twin / Tandem Inline)
Twin
Twin
Oil cooler
Accessories
Road lights
Debris blower
Warning arrow - Magnetic
Cab guard kit
Working Reach
Head used for calcs: 1.2 Pro-Trim
Oil cooler
Standard on all models
(cable controls as an option).
Left and right hand cutting
1.2m Pro-Trim with 115/150mm roller
Hydraulic System
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/hawk-evo-forward/
Right hand cutting
Cutting heads (For Flail compatibility see page 95)
Electronic rotor reverse
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Left hand cutting
Rotary head
Cable rotor reverse
Hawk Evo
FWD 5.4m
(17’9)
Head float - electronic operation
Ditch cleaner
Intelligent control system (ICS)
Want to know more about
the Hawk Evo Forward?
94°
Pro-Saw
Electronic proportional control (EPP)
• Non parallel
94°
Sheartrim cutter bar
Electronic Switch Control (ESC)
• 5.4m or 6.0m reach
800mm / 2’6”
Variable track bracket (VTB)
Low pressure hydraulics (LPH)
Independent hydraulics
800mm / 2’6”
Arm attachments available
Cable Control (CC)
Key Features
6.0m
(19’8”)
Head float - manual operation
Overall machine parameters
Weight of machine with oil but without head
• 1.2m or 1.5m cutting head
Forward reach
Mid-mount
Pump flow rate
5.4m
(17’9”)
Forward reach arm
Front mount
System capability
• 125 l/min independent system
Hawk Evo FWD
Power slew
Capacity of oil tank
Provide maximum stability for
larger arm mowers.
Not Available
Base unit mounting options
Machine weight with head and oil
Heavy duty linkage
Optional
Arm features and main frame
Minimum horse power
Fitted as standard with the powerful 125 litre drive system,
the Hawk Evo Forward will perform on all stages. There is a
choice of controls and attachments to suit a wide range of
applications.
• Heavy Duty Linkage
Standard
Hawk Evo
FWD 6.0m
(19’8”)
A
5.36m / 17’7”
5.96m / 19’7”
B
5.52m / 18’1”
6.08m / 19’11”
4.21m / 13’10”
C
3.50m / 11’6”
D
4.87m / 16’
5.19m / 17’
E
6.65m / 21’10”
7.27m / 23’8”
X
1.35m / 4’5”
1.35m / 4’5”
Y
1.00m / 3’4”
1.00m / 3’4”
1.2m Pro-Trim ISMP with
115/150mm roller
1.5m Pro-Trim with 115/150mm roller
Optimum viewing position
Clearly see the operation of the
cutting head and manoeuvre
around obstacles.
31
30
Product Specification
Hawk Evo VFA
The Hawk Evo VFA (Variable Forward Arm)
is perfect for contractors and municipal
environments, where the added benefits of a
forward arm is required to improve visibility.
Standard
6.0m
(19’8”)
Hawk Evo VFA
Tractor requirements
Minimum horse power
Transport bracket
Supplied as standard for fast
travelling on the road.
4600kg /10151lbs
1600mm / 5’3”
Telescopic arm
Telescopic arm stroke
Power slew
Mid-mount
Power slew angle
Rear mount
Gravity breakout protection
Three point linkage (CAT II)
Hydraulic breakout protection
Axle bracket
Arm float - manual operation
94°
Arm float - electronic operation
Overall machine parameters
1860kg /4100lbs
200L / 52.8USG
Weight of machine with oil but without head
1600kg / 3527lbs
Controls
Head float - manual operation
Head float - electronic operation
Left hand cutting
Right hand cutting
Left and right hand cutting
Cable Control (CC)
Arm attachments available
Low pressure hydraulics (LPH)
Key Features
Electronic proportional control (EPP)
• 6.0m reach
Electronic rotor reverse
Variable track bracket (VTB)
Sheartrim cutter bar
Intelligent control system (ICS)
Pro-Saw
Cable rotor reverse
Ditch cleaner
Rotary head
Hydraulic System
• Over 1.8m traverse on variable forward arm
Forward arm
Front mount
Capacity of oil tank
6.0m
(19’8”)
Hawk Evo VFA
Base unit mounting options
Machine weight with head and oil
With a maximum reach of 6m, the Hawk Evo VFA can cope with
every job it is tasked with. The impressive 1.8m maximum travel
on the variable forward arm (VFA) gives 1.6m forward working.
Not Available
Arm features and main frame
80hp
Minimum weight
Optional
System capability
74hp
• Heavy duty linkage or axle bracket mounted
Pump flow rate
• 125 l/min independent system
Pump type (Gear / Piston / Helical)
Gear
Pump arrangement (Twin / Tandem Inline)
Twin
125L / 33USG
Independent hydraulics
Oil cooler
Accessories
Road lights
Debris blower
Warning arrow - Magnetic
Variable Forward Arm
Cab guard kit
Cutting heads (For Flail compatibility see page 95)
1.2m Pro-Trim head with 115/150mm roller
Massive 1.6m forward reach
1.5m Pro-Trim head with 115/150mm roller
For optimum viewing position
when working.
1.2m Pro-Trim ISMP with 115mm roller
1.2m Pro-Cut head with 115/150mm roller
1.5m Pro-Cut head with 115/150mm roller
1.2m Pro-Cut ISMP with 150mm roller
Working Reach
Head used for calcs: 1.2m Pro-Trim
Want to know more about
the Hawk Evo VFA?
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/hawk-evo-vfa/
Clear visibility
Variable forward reach brings
cutting head into drivers view.
Side Reach
Forward Reach
Hawk Evo 6.0 VFA (19’8”)
Hawk Evo 6.0 VFA (19’8”)
A
6.0m / 19’8”
A
6.0m / 19’8”
B
5.96m / 19’7”
F
5.39m / 17’8”
5.9m / 19’4”
C
4.18m / 13’9”
G
D
4.99m / 16’5”
H
1.6m / 5’3”
E
6.16m / 20’3”
J
0.56m / 1’10”
X
1.35m / 4’5”
Y
1.00m / 3’4”
The VFA allows total flexibility of
position during arms operation.
33
32
Product Specification
Falcon Evo
With high specification options and a range of controls to select
from, the Falcon range is the first choice for contractors.
5.5m
(18’1”)
6.0m T
(19’8”)
6.5m T
(21’4”)
Bi-Way5.5
75hp
75hp
75hp
75hp
3500kg
7716lbs
3800kg
8378lbs
4250kg
9367lbs
3000kg
6614lbs
Falcon Evo
(18’1”)
Tractor requirements
Base unit mounting options
Strength and weight-saving
without compromise.
Not Available
Falcon Evo
Power slew
Rear mount
Power slew angle
Three point linkage (CAT II)
Gravity breakout protection
Axle bracket
Hydraulic breakout protection
94O
94O
94O
94O
Arm float - electronic operation
Key Features
Machine weight with head and oil
1930kg
4255lbs
Capacity of oil tank
250L
66USG
250L
66USG
250L
66USG
250L
66USG
Head float - electronic operation
• 5.5m, 6.0m or 6.5m reach
Weight of machine with oil but
without head
1500kg
3307lbs
1600kg
3527lbs
1900kg
4189lbs
1640kg
3616lbs
Right hand cutting
• Heavy Duty Linkage
Controls
• 125 l/min independent system
Low pressure hydraulics (LPH)
Head float - manual operation
Left hand cutting
Left and right hand cutting
Arm attachments available
Cable Control (CC)
• 1.2m or 1.5m cutting head
Electronic proportional control (EPP)
• Parallel option
Cable rotor reverse
Variable track bracket (VTB)
Sheartrim cutter bar
Pro-Saw
Intelligent control system (ICS)
Ditch cleaner
Rotary head
Electronic rotor reverse
Accessories
Hydraulic system
System capability
Road Lights
74hp
74hp
74hp
74hp
125L
33USG
125L
33USG
125L
33USG
125L
33USG
Pump type (Gear/Piston/Helical)
Gear
Gear
Gear
Gear
Oil cooler
Pump arrangement (Twin/In-line)
Twin
Twin
Twin
Twin
Standard on all models
(cable controls as an option).
Independent hydraulics
1.2m Pro-Cut - 115/150mm roller
Oil cooler
1.5m Pro-Cut - 115/150mm roller
Pump flow rate
Debris Blower
Warning Arrow (Magnetic / Fixed)
Cab Guard Kit
Cutting heads (For Flail compatibility see page 95)
1.2m Pro-Cut ISMP - 115/150mm roller
2m HD head
Working Reach
Head used for calcs: 1.2 Pro-Cut
Comes as standard, with 137L
and 85HP options.
900mm
3’
(18’1”)
Arm float - manual operation
Overall machine parameters
2190kg
4828lbs
125L and 72 HP pumps
900mm
3’
Bi-Way5.5
Telescopic arm
1890kg
4167lbs
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/falcon-evo/
6.5m T
(21’4”)
Forward arm reach
1790kg
3946lbs
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
6.0m T
(19’8”)
Forward arm
Mid-mount
Falcon 6.5m
(21’4”)
Falcon
Bi-Way 5.5m
(18’1”)
6.07m /19’11”
6.42m /21’1”
5.72m /18’9”
6.22m /20’5”
6.74m /22’1”
5.82m /19’1”
3.49m/11’5”
4.42m /14’6”
4.10m /13’11”
3.86m /12’8”
D
4.42m/14’6”
4.54m /14’11”
5.65m /18’6”
4.74m /15’7”
E
6.06m/19’
6.18m /20’3”
7.67m /25’2”
6.92m /22’8”
X
1.35m/4’5”
1.35m/4’5”
1.35m/4’5”
1.35m/4’5”
Y
1.0m/3’4”
1.0m/3’4”
1.0m/3’4”
1.0m/3’4”
Want to know more about
the Falcon Evo range?
5.5m
(18’1”)
Telescopic arm stroke
Front mount
Pressed steel first arm
construction
Optional
Arm features and main frame
Minimum horse power
Minimum weight
The Falcon Evo range has been specifically
designed for the large scale contractor.
Standard
Falcon 5.5m
(18’1”)
Falcon 6.0m T
(19’8”)
A
5.54m/18’2”
B
5.69m/18’8”
C
Bi-Way arm options
Allows the machine to cut in both
forward and reverse directions.
35
34
Product Specification
Falcon Evo
Forward
The Falcon Evo Forward arm is perfect for
contractors and municipal environments,
where the added benefits of a forward arm is
required to improve visibility.
Falcon Evo FWD
Minimum horse power
Minimum weight
FWD 6.0T
(19’8”)
FWD 6.5T
(21’4”)
100hp
120hp
120hp
4000kg
8819lbs
4500kg
9921lbs
4700kg
10362lbs
Gives increased flexibility.
2245kg
4950lbs
Head float - manual operation
Capacity of oil tank
250L
66USG
250L
66USG
250L
66USG
Left hand cutting
Weight of machine with oil but
without head
1700kg
3748lbs
1900kg
4189lbs
1955kg
4310lbs
900mm
3’
900mm
3’
94O
94O
94O
Right hand cutting
Left and right hand cutting
Arm attachments available
Cable Control (CC)
Variable track bracket (VTB)
Low pressure hydraulics (LPH)
Sheartrim cutter bar
Electronic proportional control (EPP)
Pro-Saw
Intelligent control system (ICS)
Ditch cleaner
Cable rotor reverse
Rotary head
Electronic rotor reverse
Accessories
Road Lights
74hp
74hp
74hp
125L
33USG
125L
33USG
125L
33USG
Pump type (Gear/Piston/Helical)
Gear
Gear
Gear
Excellent reach
characteristics
Pump arrangement (Twin/In-line)
Twin
Twin
Twin
Enables cutting in challenging
environments.
Oil cooler
Independent hydraulics
Debris Blower
Transport bracket
Warning Arrow (Magnetic / Fixed)
Supplied as standard for fast
travelling on the road.
Cab Guard Kit
Cutting heads (For Flail compatibility see page 95)
1.2m Pro-Cut - 115/150mm roller
1.5m Pro-Cut - 115/150mm roller
1.2m Pro-Cut ISMP - 115/150mm roller
2m HD head
Working Reach
Head used for calcs: 1.2 Pro-Cut
Standard on all models
(cable controls as an option).
1200mm
3’11”
Head float - electronic operation
Controls
System capability
Oil cooler
1200mm
3’11”
Arm float - electronic operation
2190kg
4828lbs
Falcon Evo
FWD 5.5m
(18’1”)
1200mm
3’11”
Arm float - manual operation
1990kg
4387lbs
Want to know more about
the Falcon Evo Forward?
FWD 6.5T
(21’4”)
Telescopic arm
Machine weight with head and oil
Pump flow rate
FWD 6.0T
(19’8”)
Hydraulic breakout protection
Axle bracket
• Heavy duty linkage on 5.5 or axle bracket
mounted on 6.0 & 6.5
FWD 5.5
(18’1”)
Gravity breakout protection
Three point linkage (CAT II)
Hydraulic system
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/falcon-evo-forward/
Forward arm
Power slew angle
Rear mount
• Fixed forward reach of 1.2m
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Falcon Evo FWD
Power slew
Mid-mount
Overall machine parameters
• 5.5m or 6.0/6.5m telescopic reach
Not Available
Telescopic arm stroke
Front mount
Telescopic 3rd arm on
6.0T and 6.5T models
Optional
Arm features and main frame
Base unit mounting options
Key Features
• 1.2m or 1.5m cutting head
FWD 5.5
(18’1”)
Tractor requirements
With high specification options and a range of controls to select
from, the Falcon range is first choice for contractors.
• 125 l/min independent system
Standard
Falcon Evo
FWD 6.0m T
(19’8”)
Falcon Evo
FWD 6.5m T
(21’4”)
6.55m /21’6”
A
5.58m/18’4”
6.1m /20’
B
5.73m/18’10”
6.45m /21’2”
6.71m /22’
C
3.62m/11’11”
4.68m /15’4”
4.90m /16’11”
D
4.99m/16’5”
5.45m /17’11”
5.73m /18’10”
E
6.83m/22’5”
7.56m /24’10”
7.79m /25’7”
X
1.35m /4’9”
1.35m /4’9”
1.35m /4’9”
Y
1.0m /3’4”
1.0m /3’4”
1.0m /3’4”
37
36
Product Specification
Falcon Evo VFA
The Falcon Evo VFA (Variable Forward Arm)
is perfect for contractors and municipal
environments, where the added benefits of a
forward arm is required to improve visibility.
Falcon Evo VFA
Standard
VFA 6.5m P
(21’4”)
Tractor requirements
Minimum horse power
Arm float cylinder
To aid grass cutting on roadsides.
4800kg / 10582lbs
Power slew
Mid-mount
Power slew angle
Rear mount
Gravity breakout protection
Three point linkage (CAT II)
Hydraulic breakout protection
Axle bracket
Arm float - manual operation
94O
Arm float - electronic operation
2270kg /5005lbs
250L / 66USG
Weight of machine with oil but without head
1816mm / 6’
Telescopic arm
Telescopic arm stroke
Capacity of oil tank
1980kg / 4365lbs
Controls
Head float - manual operation
Head float - electronic operation
Left hand cutting
Right hand cutting
Left and right hand cutting
Cable Control (CC)
Arm attachments available
Low pressure hydraulics (LPH)
Key Features
Electronic proportional control (EPP)
• 6.5m reach
Electronic rotor reverse
Variable track bracket (VTB)
Sheartrim cutter bar
Intelligent control system (ICS)
Pro-Saw
Cable rotor reverse
Ditch cleaner
Rotary head
Hydraulic system
• Over 2m traverse on variable forward arm
Forward arm
Front mount
Machine weight with head and oil
VFA 6.5m P
(21’4”)
Falcon Evo VFA
Base unit mounting options
Overall machine parameters
This flagship model in the VFA range provides an unrivalled 2.1m
total travel including 1.8m forward reach, resulting in an optimum
mid-mounted cutting head position.
Not Available
Arm features and main frame
120hp
Minimum weight
Optional
System capability
74hp
• Axle bracket mounted only
Pump flow rate
• 125 l/min independent system
Pump type (Gear/Piston/Helical)
Gear
Pump arrangement (Twin/In-line)
Twin
125L / 33USG
Independent hydraulics
Oil cooler
Accessories
Road Lights
Debris Blower
Warning Arrow (Magnetic / Fixed)
Variable Forward Arm
Cab Guard Kit
Cutting heads (For Flail compatibility see page 95)
1.2m Pro-Cut - 115/150mm roller
Forward reach position
1.5m Pro-Cut - 115/150mm roller
Enables mid-mounted head
position with simplicity of rear
mounted arm.
1.2m Pro-Cut ISMP - 115/150mm roller
2m HD head
Working Reach
Head used for calcs: 1.2m Pro-Cut
Want to know more about
the Falcon Evo VFA?
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/falcon-evo-vfa/
Parallel linkage
Comes as standard to assist
operator control.
Side Reach
Forward Reach
Falcon Evo 6.5m P VFA (21’4”)
Falcon Evo 6.5m P VFA (21’4”)
A
6.5m / 21’4”
A
6.61m / 21’8”
B
6.83m / 22’5”
F
5.93m / 19’5”
C
4.61m / 15’2”
G
6.4m / 21
D
6.03m / 18’9”
H
1.82m / 6’
J
0.9m / 2’11”
E
7.66m / 25’2”
X
1.6m / 5’3”
Y
1.00m / 3’4”
The VFA allows total flexibility of
position during arms operation.
39
38
Product Specification
Falcon Evo
Telescopic VFA
The Falcon Evo Telescopic VFA (Variable
Forward Arm) is perfect for contractors and
municipal environments, where the added
benefits of a forward arm is required to
improve visibility.
Falcon Evo Telescopic VFA
Standard
T-VFA 6.5m
(21’4”)
Tractor requirements
Minimum horse power
Telescopic second boom
To give greater reach in those harder
to reach areas, all controlled from the
in cab controls.
4800kg / 10582lbs
Power slew
Mid-mount
Power slew angle
Rear mount
Gravity breakout protection
Three point linkage (CAT II)
Hydraulic breakout protection
Axle bracket
Arm float - manual operation
2270kg /5005lbs
250L / 66USG
1980kg / 4365lbs
Controls
94O
Head float - manual operation
Head float - electronic operation
Left hand cutting
Right hand cutting
Left and right hand cutting
Cable Control (CC)
Arm attachments available
Low pressure hydraulics (LPH)
Variable track bracket (VTB)
Electronic proportional control (EPP)
Sheartrim cutter bar
Intelligent control system (ICS)
Pro-Saw
Cable rotor reverse
Ditch cleaner
Electronic rotor reverse
Rotary head
Hydraulic system
System capability
Pump type (Gear/Piston/Helical)
Gear
• 6.5m reach
Pump arrangement (Twin/In-line)
Twin
• Over 2m traverse on variable forward arm
Oil cooler
• 125 l/min independent system
900mm /2’11”
Arm float - electronic operation
Overall machine parameters
Weight of machine with oil but without head
2112mm / 6’11”
Telescopic arm
Telescopic arm stroke
Key Features
• Axle bracket mounted only
Forward arm
Front mount
Capacity of oil tank
T-VFA 6.5m
(21’4”)
Falcon Evo Telescopic VFA
Base unit mounting options
Machine weight with head and oil
This flagship model in the VFA range provides an unrivalled
2.1m total travel including 1.8m forward reach, resulting in an
optimum mid-mounted cutting head position.
Not Available
Arm features and main frame
120hp
Minimum weight
Optional
74hp
Pump flow rate
125L / 33USG
Independent hydraulics
Accessories
Road Lights
Debris Blower
Warning Arrow (Magnetic / Fixed)
Telescopic Reach
Cab Guard Kit
Cutting heads (For Flail compatibility see page 95)
1.2m Pro-Cut - 115/150mm roller
Close in ground cutting
1.5m Pro-Cut - 115/150mm roller
Variable arm technology allows
forward and rearward reach, enabling
cutting in behind the tractor wheel.
1.2m Pro-Cut ISMP - 115/150mm roller
2m HD head
Working Reach
Head used for calcs: 1.2m Pro-Cut
Want to know more about the
Falcon Evo Telescopic VFA?
Scan the QR code to the left with a smart
phone or tablet and compatible app to
instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/falcon-evo-vfa-t/
Close in cutting capabilities
To allow cutting in tight spaces
and narrow lanes.
Side Reach
Forward Reach
Falcon Evo 6.5m T-VFA (21’4”)
Falcon Evo 6.5m T-VFA (21’4”)
A
6.5m / 21’4”
A
6.61m / 21’8”
B
6.83m / 22’5”
F
5.93m / 19’5”
6.4m / 21’
C
4.61m / 15’2”
G
D
6.03m / 18’9”
H
1.82m / 6’
E
7.66m / 25’2”
J
0.9m / 2’11”
X
1.6m / 5’3”
Y
1.00m / 3’4”
The VFA allows total flexibility of
position during arms operation.
41
40
Product Specification
Front Mount
Range
The Bomford front mount range is designed
with local authorities in mind where front
mounted operations are required.
Front Mount Range
Standard
B49FM
(16’4”)
B54FM
(17’9”)
B58FM T
(19’)
70hp
80hp
90hp
4000kg
8819lbs
4250kg
9370lbs
4500kg
9921lbs
Tractor requirements
Base unit mounting options
Shown fitted to Unimog U500.
Power slew
Three point linkage (CAT II)
Gravity breakout protection
Axle bracket
Hydraulic breakout protection
1540kg
3395lbs
Capacity of oil tank
227L
60USG
227L
60USG
227L
60USG
Head float - electronic operation
Weight of machine with oil but
without head
1100kg
2425lbs
1160kg
2557bs
1240kg
2734lbs
Right hand cutting
Head float - manual operation
Left hand cutting
Left and right hand cutting
Sheartrim cutter bar
Pro-Saw
Ditch cleaner
Rotary head
Electronic rotor reverse
Accessories
Hydraulic system
System capability
74hp
74hp
74hp
125L
33USG
125L
33USG
125L
33USG
Pump type (Gear/Piston/Helical)
Gear
Gear
Gear
Twin
Twin
Twin
Pump flow rate
Road Lights
Debris Blower
Warning Arrow (Magnetic / Fixed)
Cab Guard Kit
Cutting heads (For Flail compatibility see page 95)
• DIN3 plate mounting option
Fitting kits for tractor
front linkages
Pump arrangement (Twin/In-line)
Independent hydraulics
1.2m Pro-Cut - 115/150mm roller
• Tractor front linkage option
Options for 1000/540 RPM.
Oil cooler
1.5m Pro-Cut - 115/150mm roller
1.2m Pro-Cut ISMP - 115/150mm roller
Working Reach
Head used for calcs: 1.2 Pro-Cut
B49FM
4.9m
(16’4”)
B54FM
5.4m
(17’9”)
B58FM T
5.8m
(19’)
A
4.9m / 16’4”
5.4m / 17’9”
5.8m / 19’
B
4.9m / 16’4”
5.4m / 17’9”
5.8m / 19’
C
3.4m / 11’2”
3.5m / 11’6”
3.6m / 11’10”
D
4.2m / 13’10”
4.7m / 15’7”
5m / 16’5”
E
6.1m / 20’
6.51m / 21’4”
6.7m / 22’
X
1.5m / 4’11”
1.5m / 4’11”
1.5m / 4’11”
Y
1.0m / 3’4”
1.0m /3’4”
1.0m /3’4”
Want to know more about
the Front Mount Range?
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/front-mount-range/
Loading shovel fitting kits
Various makes and models
available.
94O
Variable track bracket (VTB)
Cable rotor reverse
• Left and right hand side cutting
94O
Arm attachments available
Intelligent control system (ICS)
• 125 l/min fully independent hydraulic system
94O
Arm float - electronic operation
Machine weight with head and oil
1460kg
3219lbs
Electronic proportional control (EPP)
• Low profile design for good forward visibility
900mm
3’
Arm float - manual operation
1400kg
3086lbs
Low pressure hydraulics (LPH)
• Front mounted
B58FM T
(19’)
Telescopic arm
Power slew angle
Cable Control (CC)
• 4.9m, 5.4m or 5.8m reach options
B54FM
(17’9”)
Forward arm reach (Fixed / Variable)
Rear mount
Controls
Key Features
B49FM
(16’4”)
Forward arm
Mid-mount
Overall machine parameters
There are numerous fitting options on this machine, for tractors,
trucks and loading shovels.
Front Mount Range
Telescopic arm stroke
Front mount
Fitting kits for trucks
Not Available
Arm features and main frame
Minimum horse power
Minimum weight
Optional
Telescopic second arm
On the B58FM T model.
43
42
Product Specification
Buzzard Evo
Buzzard Evo
7.25m T
(23’9”)
8.0m T
(26’3”)
120hp
140hp
4900kg
10803lbs
5200kg
11464lbs
Tractor requirements
Base unit mounting options
Telescopic arm
Gives increased flexibility.
With a large choice in specification, and fully proportional controls.
• 7.25m or 8m reach
Buzzard Evo
Telescopic arm stroke
Power slew angle
Rear mount
Gravity breakout protection
Three point linkage (CAT II)
Hydraulic breakout protection
Axle bracket
Arm float - manual operation
Capacity of oil tank
250L
66USG
250L
66USG
Left hand cutting
Weight of machine with oil but
without head
2000kg
4009lbs
2200kg
4850lbs
Left and right hand cutting
94O
94O
Head float - electronic operation
Right hand cutting
Arm attachments available
Variable track bracket (VTB)
Cable Control (CC)
Intelligent control system (ICS)
1450mm
4’9”
Head float - manual operation
Machine weight with head and oil
2490kg
5490lbs
• ICS fully proportional controls
1300mm
4’3”
Arm float - electronic operation
2290kg
5049lbs
Low pressure hydraulics (LPH)
8.0m T
(26’3”)
Telescopic arm
Mid-mount
• Oil cooled as standard
7.25m T
(23’9”)
Forward arm
Front mount
Controls
• 1.2m or 1.5m cutting heads
Not Available
Power slew
Overall machine parameters
Key Features
Optional
Arm features and main frame
Minimum horse power
Minimum weight
The Buzzard Evo range has been specifically
designed for the large scale contractor and
agency.
Standard
Sheartrim cutter bar
Pro-Saw
Electronic proportional control (EPP)
Ditch cleaner
Rotary head
Cable rotor reverse
Accessories
Electronic rotor reverse
Road Lights
Hydraulic system
System capability
Pump flow rate
74hp
74hp
125L
33USG
125L
33USG
Debris Blower
Warning Arrow (Magnetic / Fixed)
Cab Guard Kit
Pump type (Gear/Piston/Helical)
Gear
Gear
Cutting heads (For Flail compatibility see page 95)
Powerful 74hp hydraulics
Pump arrangement (Twin/In-line)
Twin
Twin
1.2m Pro-Cut - 115/150mm roller
For continuous use. Twin pumps
with separate oil tank.
Independent hydraulics
1.5m Pro-Cut - 115/150mm roller
Oil cooler
1.2m Pro-Cut ISMP - 115/150mm roller
2m HD head
Working Reach
Head used for calcs: 1.2 Pro-Cut
Want to know more about
the Buzzard Evo Range?
Buzzard Evo
7.25m T (23’9”)
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/buzzard-evo/
Oil cooler
Standard on all models
(cable controls as an option).
Buzzard Evo
8.0m T (26’3”)
A
7.3m / 23’11”
7.94m / 26’1”
B
7.64m / 25’1”
8.07m / 26’6”
C
5.25m / 17’7”
5.91m / 19’5”
D
6.25m /20’6”
6.86m / 22’6”
E
8.71m / 28’7”
8.87m / 29’1”
X
1.35m / 4’7”
1.35m / 4’7”
Y
1.00m / 3’4”
1.00m / 3’4”
Fully enclosed hydraulics
Keeping components protected
from the elements.
45
44
Product Specification
Buzzard Evo
Forward
The Buzzard Evo forward range has been
specifically designed for the large scale
contractor and agency.
Buzzard Evo FWD
Standard
7.25m T
(23’9”)
8.0m T
(26’3”)
120hp
140hp
4900kg
10803lbs
5200kg
11464lbs
Tractor requirements
Minimum weight
3 arm design gives versatile
reach characteristics for
flexibility around obstacles.
With the added advantage of forward reach, give improved
visibility for the operator along with a large choice in
specification, and fully proportional controls.
Forward arm
Front mount
Power slew
Mid-mount
Power slew angle
Rear mount
Gravity breakout protection
Three point linkage (CAT II)
Hydraulic breakout protection
Axle bracket
Arm float - manual operation
2490kg
5490lbs
Capacity of oil tank
250L
66USG
250L
66USG
Left hand cutting
Weight of machine with oil but
without head
2000kg
4409lbs
2200kg
4850lbs
Left and right hand cutting
• 7.25m or 8m reach
Cable rotor reverse
• 1.2m or 1.5m cutting heads
Hydraulic system
1200mm
3’11”
1200mm
3’11”
94O
94O
Head float - manual operation
Machine weight with head and oil
2290kg
5049lbs
Key Features
8.0m T
(26’3”)
Arm float - electronic operation
Overall machine parameters
Low pressure hydraulics (LPH)
7.25m T
(23’9”)
Telescopic arm
Telescopic arm stroke
Head float - electronic operation
Right hand cutting
Arm attachments available
Variable track bracket (VTB)
Cable Control (CC)
Sheartrim cutter bar
Pro-Saw
Electronic proportional control (EPP)
Ditch cleaner
Intelligent control system (ICS)
Rotary head
Accessories
Electronic rotor reverse
Road Lights
System capability
Pump flow rate
• ICS fully proportional controls
Buzzard Evo FWD
Base unit mounting options
Controls
• Oil cooled as standard
Not Available
Arm features and main frame
Minimum horse power
Impressive reach
Optional
74hp
74hp
125L
33USG
125L
33USG
Debris Blower
Warning Arrow (Magnetic / Fixed)
Cab Guard Kit
Pump type (Gear/Piston/Helical)
Gear
Gear
Cutting heads (For Flail compatibility see page 95)
Transport position
Pump arrangement (Twin/In-line)
Twin
Twin
1.2m Pro-Cut - 115/150mm roller
Folding 3rd arm allows compact
transport position.
Independent hydraulics
1.5m Pro-Cut - 115/150mm roller
Oil cooler
1.2m Pro-Cut ISMP - 115/150mm roller
Working Reach
Head used for calcs: 1.2 Pro-Cut
Buzzard Evo
FWD 7.25m T
(23’9”)
Want to know more about
the Buzzard Evo Forward?
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/buzzard-evo-forward/
Powerful 74hp hydraulics
For continuous use. Twin pumps
with separate oil tank.
Buzzard Evo
FWD 8.0m T
(26’3”)
A
7.19m / 23’7”
7.94m / 26’1”
B
7.27m / 23’10”
8.13m / 26’8”
6.31m / 20’8”
C
5.47m / 17’11”
D
6.8m /22’4”
7.4m / 24’3”
E
8.52m / 27’11”
9.24m / 30’4”
X
1.35m / 4’7”
1.35m / 4’7”
Y
1.00m / 3’4”
1.00m / 3’4”
Forward reach position
Enables mid-mounted head
position with simplicity of rear
mounted arm.
47
46
Product Specification
B71M
B80M
A professional range of machines designed for
smaller, lightweight tractors. Requiring only a
mass of 4900kg for the tractor, this range of
arm mowers really gives the contractor true
flexibility.
Standard
7.1m
(23’7”)
8.0m
(26’3”)
120hp
140hp
4900kg
10803lbs
5200kg
11464lbs
B71M & B80M
Minimum horse power
Minimum weight
Includes hydraulic breakout to
protect machine operator.
• Oil cooled as standard
• ICS fully proportional controls
Power slew angle
Gravity breakout protection
Rear mount
Hydraulic breakout protection
Three point linkage (CAT II)
Arm float - manual operation
Axle bracket
Arm float - electronic operation
Machine weight with head and oil
2290kg
5049lbs
2490kg
5490lbs
Head float - electronic operation
Capacity of oil tank
250L
66USG
250L
66USG
Right hand cutting
Weight of machine with oil but
without head
2000kg
4409lbs
2200kg
4850lbs
Arm attachments available
Left hand cutting
Left and right hand cutting
Variable track bracket (VTB)
Sheartrim cutter bar
Pro-Saw
Ditch cleaner
Rotary head
Intelligent control system (ICS)
Cable rotor reverse
Accessories
Electronic rotor reverse
Road Lights
Debris Blower
Hydraulic system
System capability
Pump flow rate
74hp
74hp
125L
33USG
125L
33USG
Warning Arrow (Magnetic / Fixed)
Reach great heights
Cab Guard Kit
With forward positioning and two
reach options of 7.1m and 8.0m.
Cutting heads (For Flail compatibility see page 95)
Pump type (Gear/Piston/Helical)
Gear
Gear
Forward reach position
1.2m Pro-Cut - 115/150mm roller
Pump arrangement (Twin/In-line)
Twin
Twin
1.5m Pro-Cut - 115/150mm roller
Enables mid-mounted head
position with simplicity of rear
mounted arm.
Independent hydraulics
1.2m Pro-Cut ISMP - 115/150mm roller
Oil cooler
Working Reach
Head used for calcs: 1.2 Pro-Cut
B71M
7.1M (23’7”)
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/b71m-and-b80m/
Transport position
Folding 3rd arm allows compact
transport position.
110O
Head float - manual operation
Overall machine parameters
Want to know more about
the B71M and B80M?
110O
Telescopic arm stroke
Mid-mount
Electronic proportional control (EPP)
• 1.2m or 1.5m cutting heads
8.0m
(26’3”)
Telescopic arm
Power slew
Low pressure hydraulics (LPH)
• 7.1m or 8m reach
7.1m
(23’7”)
Forward arm
Front mount
Cable Control (CC)
Key Features
B71M & B80M
Base unit mounting options
Controls
The 3 arm arrangement gives a versatile reach characteristic,
allowing cutting over obstacles such as fences and guard rails.
Not Available
Arm features and main frame
Tractor requirements
Heavy duty twin ram
slew system
Optional
B80M
8.0M (26’3”)
A
7.1m / 23’7”
8.0m / 26’3”
B
6.95m / 23’
7.85m / 25’9”
C
5.27m / 17’3”
6.17m / 20’3”
D
4.75m /15’5”
5.65m / 18’6”
E
8.26m / 26’3”
8.9m / 29’2”
X
1.35m / 4’7”
1.35m / 4’7”
Y
1.00m / 3’4”
1.00m / 3’4”
49
48
Product Specification
B81.81
8.1m T
(26’7”)
B81.81
Tractor requirements
Minimum horse power
5200kg
11464lbs
Base unit mounting options
Heavy duty twin ram
slew system
Includes hydraulic breakout to
protect machine operator.
The 3 arm arrangement gives a versatile reach characteristic,
allowing cutting over obstacles such as fences and guard rails.
B81.81
Telescopic arm
Telescopic arm stroke
Mid-mount
Power slew angle
Rear mount
Gravity breakout protection
Three point linkage (CAT II)
Hydraulic breakout protection
Axle bracket
Arm float - manual operation
Capacity of oil tank
250L
66USG
Left hand cutting
Weight of machine with oil but without head
1955kg
4310lbs
Left and right hand cutting
Head float - electronic operation
Right hand cutting
Arm attachments available
Variable track bracket (VTB)
Sheartrim cutter bar
Pro-Saw
Electronic proportional control (EPP)
Ditch cleaner
Intelligent control system (ICS)
• 1.2m or 1.5m cutting heads
Cable rotor reverse
• Oil cooled as standard
Hydraulic system
• ICS fully proportional controls
System capability
Rotary head
Accessories
Electronic rotor reverse
Road Lights
74hp
125L
33USG
Pump flow rate
Debris Blower
Warning Arrow (Magnetic / Fixed)
Cab Guard Kit
Pump type (Gear/Piston/Helical)
Gear
Cutting heads (For Flail compatibility see page 95)
Telescopic arm
Pump arrangement (Twin/In-line)
Twin
1.2m Pro-Cut - 115/150mm roller
Gives increased flexibility.
Independent hydraulics
1.5m Pro-Cut - 115/150mm roller
Oil cooler
1.2m Pro-Cut ISMP - 115/150mm roller
2m HD head
Working Reach
Head used for calcs: 1.2 Pro-Cut
B81.81
8.1m T (26’7”)
A
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/b8181/
ICS Controls
Fingertip control with adjustable
speed settings.
180O
Head float - manual operation
Machine weight with head and oil
2490kg
5490lbs
Low pressure hydraulics (LPH)
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
1450mm
4’9”
Arm float - electronic operation
Overall machine parameters
Want to know more about
the B81.81?
8.1m T
(26’7”)
Forward arm
Front mount
Cable Control (CC)
• 8.1m reach
Not Available
Power slew
Controls
Key Features
Optional
Arm features and main frame
140hp
Minimum weight
A professional range of machines designed for
smaller, lightweight tractors. Requiring only a
mass of 4900kg for the tractor, this range of
arm mowers really gives the contractor true
flexibility.
Standard
8.08m / 26’6”
B
7.93m / 26’
C
6.27m / 20’7”
D
6.52m / 21’5”
E
8.92m / 29’3”
X
1.3m /4’1”
Y
1.0m /3’3”
Transport cradle
For fast road transit.
51
50
Product Specification
Eagle
8.0m T
(26’4”)
Eagle
Tractor requirements
Minimum horse power
6500kg
14330lbs
Base unit mounting options
Improves hose routing and
aids cooling.
Eagle
Forward arm reach
Telescopic arm
Power slew
Rear mount
Power slew angle
Three point linkage (CAT II)
Gravity breakout protection
Axle bracket
Hydraulic breakout protection
Capacity of oil tank
138L
37USG
Head float - electronic operation
Weight of machine with oil but without head
2230kg
4916lbs
Right hand cutting
Head float - manual operation
Left hand cutting
Left and right hand cutting
Arm attachments available
Cable Control (CC)
Variable track bracket (VTB)
Low pressure hydraulics (LPH)
Key Features
Electronic proportional control (EPP)
• 8m reach
Electronic rotor reverse
• Left and right handed cutting
System capability
Sheartrim cutter bar
Pro-Saw
Intelligent control system (ICS)
Ditch cleaner
Cable rotor reverse
Rotary head
Accessories
Hydraulic system
85hp
137L
36USG
Road Lights
Debris Blower
• 137 l/min independent hydraulic system
Pump flow rate
• 1.2m, 1.5m or 2m cutting head
Pump type (Gear/Piston/Helical)
Gear
Heavy duty twin ram slew
system
Pump arrangement (Twin/In-line)
Twin
Independent hydraulics
1.2m Pro-Cut - 115/150mm roller
Includes hydraulic breakout to
protect machine operator.
Oil cooler
1.5m Pro-Cut - 115/150mm roller
Warning Arrow (Magnetic / Fixed)
Cab Guard Kit
Cutting heads (For Flail compatibility see page 95)
1.2m Pro-Cut ISMP - 115/150mm roller
2m HD head
Working Reach
Head used for calcs: 1.2 Pro-Cut
Eagle
8.0M T (26’4”)
A
Alternatively visit: http://www.bomford-turner.com/
landscape/arm-mowers/eagle/
Worm drive slew
New turntable design allows
precise control of cutting head.
180O
Arm float - electronic operation
Machine weight with head and oil
Controls
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
1300mm
4’3”
Arm float - manual operation
2590kg
5710lbs
Want to know more about
the Eagle?
8.0m T
(26’4”)
Forward arm
Mid-mount
Overall machine parameters
The Eagle can be specified with either a gear or a piston system,
and features wraparound steel hoses on the first arm and
kingpost for durability and improved hose routing, along with
weight saving.
Not Available
Telescopic arm stroke
Front mount
Steel hoses
Optional
Arm features and main frame
160hp
Minimum weight
The Eagle flail mower features a telescopic outer
arm, giving it a maximum reach of 8.0 metres
and the whole arm is mounted on a kingpost so
that it can be slewed through 180 degrees for
double sided, left or right-hand cutting.
Standard
8.0m / 26’3”
B
7.8m / 25’7”
C
6.2m / 20’4”
D
7.0m / 23’
E
8.8m / 28’11”
X
1.2m / 3’11”
Y
1.2m / 3’11”
Improved main cutting
circuit oil cooler
For better temperature control.
53
52
LANDSCAPE
Flail Mowers
& Toppers
Bomford Turner offer a range of flail mowers and
rotary toppers from simple grounds-care machines
to agricultural-industrial mowers for municipal and
airport landscape maintenance.
These machines are built with straightforward objectives: quality, function,
value and robust design. The simple operation of the products in this
range also ensures customer satisfaction every time.
Flail Mower &
Toppers Range
CTVM
54
Bandit
55
Raptor
56
Turbo VM
57
Turbo Mower
58
Twin-Blade
60
Tri-Blade
61
Tri-Wing
62
55
54
CTVM
Bandit
Developed to meet the demands of local
authorities for parks and municipal areas.
The Bandit trailed flail mower is aimed at
professional users where efficiency and finish
are a must.
The CTVM has a variable cutting height from 8mm to 130mm, a
mountable kerb height of 355mm, sealed bearings and pressed
scoop flails.
The Bomford Bandit mower range is built to withstand the toughest
working conditions, remaining manoeuvrable when mowing tight
up to walls and obstructions. The flexible design of the Bandit
allows it to be front or rear mounted simply by turning the “A”
frame around.
It features a twin V belt drive and interchangeable mounting arms
to accommodate a large range of prime movers.
Key Features
Key Features
• 1.3m and 1.6m cutting widths
• 1.5m or 1.8m or 2.25m cutting widths
• Shaft driven
• Fitted with roller as standard
• 115 mm roller
• Variable cutting height
• Cat II three point linkage
Product Specification
CTVM
CTVM 1.3M
CTVM 1.6M
• Front or rear mount option
Product Specification
Bandit
B1500
B1800
B2250
2.25m / 7'2"
Cutting width
1300mm / 4’3”
1600mm / 5’3”
Cutting Width
1.5m / 4'11"
1.8m / 6'
Overall width
1500mm / 4’11”
1797mm / 5’11”
Transport Width
1.74m / 5'8"
2.05m / 6'9"
2.50m / 8'2"
130mm / 5”
130mm / 5”
Cutting Height
13-105mm / 1/2”-4’
13-105mm / 1/2”-4’
13-105mm / 1/2”-4’
Max cutting height
Min cutting height
Weight
Mountable kerb height
Front wheels (D - Diameter / W - Width)
Rear roller (Diameter)
Rotor shaft (Diameter)
Want to know more about
the CTVM range?
Bearing
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Gearbox and tube
Alternatively visit: http://www.bomford-turner.com/
landscape/flail-mowers-and-toppers/ctvm/
• 540 or 1000 rpm PTO speeds
8mm / 3/8”
8mm / 3/8”
215kg / 474lbs (cw NH-MC35 mounting brackets)
295kg / 650lbs (cw NH-MC35 mounting brackets)
355mm / 14” (with NH-MC35)
355mm / 14” (with NH-MC35)
300mm / 12” (D) & 105mm / 4” (W)
300mm / 12” (D) & 105mm / 4” (W)
115mm / 4 1/4”
115mm / 4 1/4”
102mm / 4”
102mm / 4”
40mm sealed bearings
40mm sealed bearings
24 Scoop type / 41 metres per second tip speed
32 Scoop type / 41 metres per second tip speed
EP90 filled gearbox and drive tube
Quad bearings
EP90 filled gearbox and drive tube
Quad bearings
PTP
Max 2250 rpm PTO input speed (different
input speeds can be catered for)
Max 2250 rpm PTO input speed (different
input speeds can be catered for)
Cowl
4mm domex sheet, 5mm rear rubber guarding,
heavy duty arms and Cat II pins
4mm domex sheet, 5mm rear rubber guarding,
heavy duty arms and Cat II pins
Drive
Twin vee-belts on cast pulleys, tensioned
through gearbox mountings
Twin vee-belts on cast pulleys, tensioned
through gearbox mountings
Flails
No. of Flails
Flail Type
Full offset left of centre
Offset system
Power management
Rear roller size (Diameter)
Want to know more about
the Bandit range?
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://ww.bomford-turner.com/
landscape/flail-mowers-and-toppers/bandit/
Weight (Approx)
40
50
62
Pro / Bootee / BB
Pro / Bootee / BB
Pro / Bootee / BB
700mm / 2’4”
700mm / 2’4”
700mm / 2’4”
Manual
Optional Hydraulic
Hydraulic
30hp
50hp
90hp
115mm /4 1/2”
150mm / 6”
150mm / 6”
470kg / 1036lbs
580kg / 1279lbs
650kg / 1433lbs
57
56
Raptor
Turbo VM
The new Raptor verge mower is the ideal choice
for users who have a dedicated shoulder
mowing operation to perform.
The Turbo VM is specifically designed for verge
mowing over sustained periods.
With front or rear mounted options in both 1.6m and 2.0m models
there is a Turbo VM machine for every application. A single lever
control option is available for added flexibility.
The Raptor can be front mounted allowing the fitting of a
Bomford arm mower on the rear giving a 3.5m cut, in one pass.
The Raptor can effortlessly work around street furniture and
varying ground levels.
Key Features
Key Features
• 1.6m or 2.0m cutting widths
• Cutting widths of 1.2, 1.6 or 2.0m.
• Direct drive through twin pivoting gearboxes
• Front or Rear mounted options
• 750mm offset
• Banks cutting between 90° up and 50° down
• Cat II three point linkage
• Cat II three point linkage
• New front mount option available
• Choice of flails
• Plus 90° to minus 50° cowl angling
Product Specification
Raptor
• MP44 boot flails or twisted shackle flails
1200
1600
2000
2.84m / 9'4"
3.24m / 10'7"
3.64m / 12"
1.2m / 4'
1.6m / 5'3"
2m / 6'6"
Max Offset
750mm / 2'6"
750mm / 2'6"
750mm / 2'6"
No. of Flails
32
44
54
1000 / 540
1000 / 540
1000 / 540
140° (+90° to -50°)
140° (+90° to -50°)
140° (+90° to -50°)
Reach
Cutting Width
PTO Speed (rpm)
Cowl Angle Movement
Power Requirement
Weight
40hp
45hp
70hp
620kg / 1367lbs
830kg / 1830lbs
900kg / 1984lbs
Turbo VM
Width
Fully offset left or centre
Direct Drive System
PTO input (rpm)
No. of Bootee Flails
Tractor HP
Cowl Angle Movement
Weight
Front Mountable
Front Mountable
Want to know more about
the Raptor range?
Want to know more about
the Turbo VM range?
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/flail-mowers-and-toppers/raptor/
Product Specification
Alternatively visit: http://www.bomford-turner.com/
landscape/flail-mowers-and-toppers/turbo-mower-vm/
1600
2000
1.6m / 5'4"
2.0m / 6'7"
750mm / 2'5"
750mm / 2'5"
Quad Power Drive Belts + 90° Gearbox x 2
Quad Power Drive Belts + 90° Gearbox x 2
1000
1000
44
54
90hp
125hp
140° (+90° to -50°)
140° (+90° to -50°)
1180kg / 2601lbs
1250kg / 2756lbs
59
58
Product Specification
Turbo Mower
The Turbo Mower Elite, Euro, Open and Pro
range offers operators a huge choice of cutting
widths at very cost effective prices.
Turbo Mower
OFFSET
225
2.25m / 7’4”
1.9m / 6'4"
2.26m / 7'5"
2.42m / 8'
2.72m / 8'10”
1.6m / 5’3”
2.1m / 6’10”
2.45m / 8’
2.6m / 8’6”
2.9m / 9’6”
1.8m / 6’
2.45m / 8’
Weight
213kg / 469lbs
237kg / 522lbs
451kg / 994lbs
554kg / 1221lbs
596kg / 1313lbs
632kg / 1393lbs
665kg / 1466lbs
775kg / 1709lbs
Hydraulic Offset
Hyd Operated
Hyd Operated
Hyd Operated
Hyd Operated
Hyd Operated
Hyd Operated
Fully offset left of centre
400mm / 15 3/4”
400mm / 15 3/4”
400mm / 15 3/4”
400mm / 15 3/4”
2700mm / 9’
3350mm /11’
540
540
540
1000
540
540
540
540
18
20
24
28
30
34
20
28
Power requirements
30-37 hp
35-40 hp
45-60 hp
55-75 hp
65-90 hp
75-100 hp
47-60 hp
80-117 hp
Cutting height
32-111mm
1 1/4” - 4 1/2”
32-111mm
1 1/4” - 4 1/2”
32-111mm
1 1/4” - 4 1/2”
32-111mm
1 1/4” - 4 1/2”
32-111mm
1 1/4” - 4 1/2”
32-111mm
1 1/4” - 4 1/2”
30-80mm
1 1/4” - 3 1/4”
30-80mm
1 1/4” - 3 1/4”
114mm / 4 1/2”
114mm / 4 1/2”
140mm / 5 1/2”
140mm / 5 1/2”
140mm / 5 1/2”
140mm / 5 1/2”
140mm / 5 1/2”
140mm / 5 1/2”
EURO
250
EURO
280
OPEN
250
OPEN
280
PRO
250
PRO
270
PRO
300
Working Width
2.5m / 8'3"
2.8m / 9'2"
2.44m / 8'
2.77m / 9'1"
2.45m / 8’
2.70m/ 8’10”
3.00m/ 9’10”
Overall Width
2.67m / 8’9”
3m / 9’10”
2.67m / 8’9”
3m / 9’10”
2.73m / 8’11”
2.98m / 9’9”
3.28m/ 10’9”
Turbo Mower
Weight
867kg / 1911lbs
939kg / 2070lbs
859kg / 1893lbs
Hydraulic Offset
Hyd Operated
Hyd Operated
Hyd Operated
Hyd Operated
Hyd Operated
Hyd Operated
Hyd Operated
Fully offset left of centre
500mm / 19 3/4”
500mm / 19 3/4”
500mm / 19 3/4”
500mm / 19 3/4”
400mm / 15 3/4”
400mm / 15 3/4”
400mm / 15 3/4”
1000
1000
1000
1000
1000
1000
1000
PTO speed
928kg / 2045lbs 1210kg / 2667lbs 1284kg / 2830lbs 1390kg / 3064lbs
Front mount
No. of Flails (Whale Tail)
• Standard fitted roller and side skids
• Over run slip clutch protected
OFFSET
160
1.45m / 4'9"
Roller size
• Hydraulic offset standard on 1.9m
and above
• Cat II three point linkage mounted
ELITE
270
1.63m / 5’4”
No. of Flails (Whale Tail)
• 1.3 and 1.5 manual offset
ELITE
245
1.3m / 4'3
On some models the rear hood
can be opened.
• Front mount options
ELITE
225
1.47m / 4’10”
Front mount
• Choice of cutting widths available
ELITE
190
Not Available
Working Width
Adjustable guards
Key Features
ELITE
150
Optional
Overall Width
PTO speed
A well designed and constructed range, the Turbo Mower is built
with durability and ease-of-use in mind – a low maintenance
machine that is simple to operate.
ELITE
130
Standard
28
32
28
32
20
24
26
Power requirements
65-110 hp
75-110 hp
65-100 hp
75-110 hp
68-80 hp
80-120 hp
95-135 hp
Cutting height
43-88mm
1 3/4 - 3 1/2”
43-88mm
1 3/4 - 3 1/2”
32-111mm
1 1/4” - 4 1/2”
32-111mm
1 1/4” - 4 1/2”
45-157mm
1 3/4 - 61/4”
45-157mm
1 3/4 - 61/4”
45-157mm
1 3/4 - 61/4”
170mm / 6 3/4”
170mm / 6 3/4”
170mm / 6 3/4”
170mm / 6 3/4”
220 / 8 3/4”
220 / 8 3/4”
220 / 8 3/4”
Roller size
Compact models
Machines for tractors over
800kg and above 30HP.
Offset mower
Want to know more about
the Turbo Mower range?
Capable of being fully offset and
cutting within the width of the
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
tractor. Cutting angles vertical
90° and down 65°.
Alternatively visit: http://www.bomford-turner.com/
landscape/flail-mowers-and-toppers/turbo-mower/
Twin head stock
Front and rear mount
options available.
61
60
Twin-Blade
Tri-Blade
The new, more robust Twin-Blade is a flexible,
efficient, in-line topper or fully offset - perfect for
paddocks and headlands.
The Tri-Blade topper is of robust design and has
three sets of newly designed, heavy duty timed
blades for stripe free cutting.
The range extends from 1.8m and semi-offset (2.4m/2.7m) to 2.4m
fully offset. The Twin-Blade also features cast-iron gearboxes and
protected drivelines. Simple, adjustable skids on this machine are
key to a smooth operation.
With an adjustable cutting height of between 25mm (1”) and
333mm (10”) the Bomford Tri-Blade offers superb versatility.
Direct driven blades through 1000rpm independent gearboxes
and rubber PTO shaft couplings protects against debris impact.
Slip clutch protection on the PTO shaft ensures long life of the
independent gearboxes.
Key Features
• Shaft driven
• 1.8m, 2.4m, 2.4m offset and 2.7m cutting width
Key Features
• Variable cutting height
• 2.75m cutting width
• Shearbolt and overrun gear box protection
• 3.0m transport width
• Cat 1 or Cat II three point linkage
• A-Frame mounting option
Twin-Blade
TB240 Inline
TB270 Inline
TB240 Offset
1800mm / 5’11”
2400mm / 7’10”
2800mm / 9’2”
2400mm / 7’10”
1970mm / 7’6”
2571mm / 8’5”
2971mm /9’9”
1850mm / 6’1”
Power Requirement (PTO)
22kW (30hp)
22kW (30hp)
22kW (30hp)
22kW (30hp)
Cat I & II
Cat II
Cat II
Cat II
Product Specification
• Slip clutch protection
Tri-Blade
• Front and rear heavy duty chain guards
Cutting Width
• Cat II three point linkage
• 1000 rpm gearbox driven
Transport Width
Power Requirements
Length
3000
4000
2.75m / 9'
4m / 13'2"
3.0m / 9'10"
1.8m / 6'
90hp
120hp
3.54m / 11'4"
4.54m / 14'10"
25mm-333mm / 1"-10")
25mm-333mm / 1"-10"
1000rpm
1000rpm
Offset Capability
Yes
Yes
No
Yes
Fully Offset Right of Centre
N/A
N/A
N/A
4350mm / 14’3”
540rpm
540rpm
540rpm
540rpm
1
2
2
2
Number Of Blade Carriers
1
2
2
2
Number Of Blades
6
6
Number Of Blades
2
4
4
4
Number Of Skids
2
2
980kg / 2161lbs
1325kg / 2921lbs
Number Of Rotors
Alternatively visit: http://www.bomford-turner.com/
landscape/flail-mowers-and-toppers/twin-blade/
TB180
Cutting Width
PTO Speed
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
• Three sets of timed blades
Overall Width (Transport)
Linkage Mounting
Want to know more about
the Twin-Blade range?
• Variable cutting height
Product Specification
Number Of Skids
Cutting Height
Weight
2
2
2
2
30-150mm
1 1/4”- 6”
30-150mm
1 1/4”- 6”
30-150mm
1 1/4”- 6”
30-150mm
1 1/4”- 6”
290kg / 640lbs
390kg / 681lbs
430kg / 948lbs
550kg / 1213lbs
Cutting Height
PTO Speed
Want to know more about
the Tri-Blade range?
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
landscape/flail-mowers-and-toppers/tri-blade/
Number Of Rotors
3
3
Number Of Blade Carriers
3
3
Weight
63
62
Product Specification
Tri-Wing
A flex mower specifically designed for large open
spaces, with wide-angle constant velocity drive
shafts and in-line slip clutch protection.
Tri-Wing
TW6000
Cutting Width
4.60m / 15’
6.00m / 20’
Overall Width
4.75m / 15’7”
6.30m /20’8”
Overall Length
4.47m / 14’8”
5.15m / 16’11”
Transport Width
2.34m / 7’8”
2.55m / 8’4”
Cutting Height
25mm - 375mm / 1”- 15”
25mm - 375mm / 1”- 15”
Horsepower (min)
Road lights
Blade Overlap
High speed road lighting and
licence plate brackets.
PTO Speed
The clean lines of this robust design, reduces the build up cut
debris from collecting and rotting the machine deck, maximising
it’s working life.
TW4600
80hp
100hp
150mm / 6”
150mm / 6”
1000
1000
Wing Flex (Degrees)
90° up - 22° down
90° up - 22° down
Weight (Approx)
2420kg / 5335lbs
3470kg / 7650lbs
Fitted with six 200/60 - 14.5 10 ply tyres as standard, the
Tri-Wing 4.6 and 6m can also be also supplied with an eight
wheel option for reduced ground pressure. The sprung shock
absorbing mechanism ensures a smooth ride and reduces
stress within the mainframe.
Key Features
Easy to Transport
• 4.6m and 6m cutting widths
fold and travel, with additional
Simple single operation to
• Walking wheel kit option
• Nine heavy duty updraft blades
• Choice of 5 blade configurations
locking pins for road transit.
Axle options
Walking axle options for
contour following operation.
• Shredder option for maize
• Sprung suspension system
• 2.3m and 2.6m transport widths
• Hydraulic level lift system
Want to know more about
the Tri-Wing range?
Wide Coverage
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
4.6m and 6.0m models allow
wide cutting passes to tackle
large open areas quickly.
Alternatively visit: http://ww.bomford-turner.com/
landscape/flail-mowers-and-toppers/tri-wing/
Contoured decks
Allows quick cleaning of cut
material from deck surface.
65
64
FORESTRY
Mulchers &
Excavators
A range of robust, simple and effective
forestry equipment. Our mulchers come
with a choice of hammers and are available
tractor mounted or excavator mounted.
The Bomford Turner range of robust and effective mulchers
offers real versatility with 2 ranges, standard duty (SD) and heavy
duty (HD), with swinging or fixed hammers alongside our excavator
mounted options. Capable of clearing and mulching wood up to
300mm diameter (12”) on the Buccaneer HDX models, large areas
can be cut, mulched and cleared in a single operation.
To complement our range of mulchers we also offer a selection of
tree loppers to assist with hedgerow and tree line maintenance.
Forestry Range
Buccaneer
66
Buccaneer Excavator
68
Buccaneer Excavator Mini
70
Tree Lopper
71
67
66
Product Specification
Buccaneer
Suitable for use with tractors of between 40hp to
180hp and features a heavy duty gearbox. The
robust build means that the smaller 1.3m cutting
machine weighs 658kg while the wider 2.5m
model comes in at 2,095Kgs.
SD Range
• 40-180hp tractor requirement options
Width of Cut
1300mm
4’3”
1500mm
4’11”
1800mm
5’10”
2000mm
6’6”
2250mm
7’4”
2500mm
8’2”
Overall Width
1500mm
4’11”
1750mm
5’8”
2000mm
6’6”
2250mm
7’4”
2500mm
8’2”
1500mm
4’11”
1800mm
5’10”
2000mm
6’6”
Overall Width
1500mm
4’11”
1750mm
5’8”
2000mm
6’6”
2250mm
7’4”
7 belt drive on SD models and 12
belts (dual drive) on HDX ranges.
Hammer Type
Weight
20
24
28
32
36
200mm
200mm
200mm
200mm
200mm
540
540
540
540
540
7
7
7
7
7
Swing
Swing
Swing
Swing
Swing
658kg
1451lbs
788kg
1737lbs
952kg
2099lbs
1116kg
2460lbs
1280kg
2820lbs
Number of Hammers
Cutting Diameter
PTO Speed
Number of Belts
Hammer Type
Weight
22
26
30
34
36
200mm
200mm
200mm
200mm
200mm
540
540
540
540
540
7
7
7
7
7
Fixed
Fixed
Fixed
Fixed
Fixed
665kg
1466lbs
815kg
1797lbs
977kg
2154lbs
1148kg
2531lbs
1305kg
2877lbs
Tractor HP
40-120hp
50-120hp
65-120hp
75-120hp
90-120hp
Tractor HP
40-120hp
50-120hp
65-120hp
75-120hp
90-120hp
Additional Features
RR Pushbar
RR Pushbar
RR Pushbar
RR Pushbar
RR Pushbar
Additional Features
RR Pushbar
RR Pushbar
RR Pushbar
RR Pushbar
RR Pushbar
HDX Range
HDX180
HDX200
HDX225
HDX250
HDXF Range
HDXF180
HDXF200
HDXF225
HDXF250
Width of Cut
1800mm
5’10”
2000mm
6’6”
2250mm
7’4”
2500mm
8’2”
Width of Cut
1800mm
5’10”
2000mm
6’6”
2250mm
7’4”
2500mm
8’2”
Overall Width
2210mm
7’3”
2410mm
7’10”
2660mm
8’8”
2720mm
8’11”
Overall Width
2210mm
7’3”
2410mm
7’10”
2660mm
8’8”
2720mm
8’11”
Number of Hammers
Cutting Diameter
Number of Belts
Hammer Type
Weight
Swinging hammer options
2250mm
7’4”
1300mm
4’3”
PTO Speed
• Hydraulically adjustable throughout flap
SDF225
Width of Cut
Number of Belts
• Six belt driven (12 on HDX model)
SDF200
SD225
PTO Speed
• Fixed or swinging flail options
SDF180
SD200
Heavy duty drive
• Choice of 6 cutting width options
SDF150
SD180
Cutting Diameter
Key Features
SDF130
SD150
Number of Hammers
The standard specification of the new Bomford Buccaneer HDX
includes a front double-row chain guard, Cat 2/3 three-point
linkage and heavy-duty replaceable skids. A front mounted
version of the Buccaneer HDX is also available.
SDF Range
SD130
16
20
20
24
300mm
300mm
300mm
300mm
1000
1000
1000
1000
12
12
12
12
Swing
Swing
Swing
Swing
1690kg
3726lbs
1815kg
4001lbs
1935kg
4265lbs
2095kg
4619lbs
Number of Hammers
Cutting Diameter
PTO Speed
Number of Belts
Hammer Type
Weight
30
34
36
40
300mm
300mm
300mm
300mm
1000
1000
1000
1000
12
12
12
12
Fixed
Fixed
Fixed
Fixed
1556kg
3430lbs
1681kg
3706lbs
1805kg
3979lbs
1963kg
4328lbs
Tractor HP
60-180hp
80-180hp
90-180hp
90-180hp
Tractor HP
90-180hp
100-180hp
120-180hp
130-180hp
Additional Features
RR Pushbar
RR Pushbar
RR Pushbar
RR Pushbar
Additional Features
RR Pushbar
RR Pushbar
RR Pushbar
RR Pushbar
Ideal for use on green vegetation
for shredding.
• Rear pushbar standard on 2.24m models
• Replaceable skids
• 540rpm or 1,000rpm
Want to know more about
the Buccaneer range?
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Fixed
Hammers
Push Bars
Options available.
as standard enable
Suitable for
material to be pushed
managing wooded
over and presented
areas and providing a
to the cutting rotor.
chipped wood finish.
Hydraulic rear hood
Benefits are mulching
for closing down
the debris within
rear opening for
the soil leaving the
mulching.
ground level.
Alternatively visit: http://www.bomford-turner.com/
forestry/buccaneer/
Protection
Double rows of heavy chains
and adjustable skids.
Rear push bars fitted
69
68
Product Specification
Buccaneer
Excavator
The Bomford Buccaneer Excavator is suitable for
use with excavators from 7 to 30 tonnes.
There are 4 ranges available:
SDH Range
SDH130
SDH150
SDH180
Working width
1300mm / 4’3”
1500mm / 4’11”
1800mm / 5’10”
Transport width
1500mm / 4’11”
1750mm / 5’8”
2000mm / 6’6”
200mm
200mm
200mm
Number of Hammers
20
20
20
Number of Belts
7
7
7
Swing
Swing
Swing
Cutting Diameter
Hammer Type
Protection
Weight
Double rows of heavy chains
and adjustable skids.
Oil flow L/min
SDH Range - With swinging hammers and 360° movement
suited to mulch brush up to 200mm diameter.
SDFH150
SDFH180
Working width
1300mm / 4’3”
1500mm / 4’11”
1800mm / 5’10”
Transport width
1500mm / 4’11”
1750mm / 5’8”
2000mm / 6’6”
200mm
200mm
200mm
Number of Hammers
22
26
30
Number of Belts
7
7
7
Fixed
Fixed
Fixed
Cutting Diameter
Hammer Type
957kg / 2110lbs
1013kg / 2233lbs
1070kg / 2359lbs
80-120L / 21-32 USG
80-120L / 21-32 USG
Oil pressure (Bar)
200-260
200-260
200-260
Oil pressure (Bar)
HDH Range
HDH140
HDH180
HDH200
HDFH Range
Weight
Oil flow L/min
912kg / 2011lbs
960kg / 2116lbs
1018kg / 2244lbs
80-120L / 21-32 USG
80-120L / 21-32 USG
80-120L / 21-32 USG
200-260
200-260
200-260
HDFH140
HDFH180
HDFH200
Working width
1400mm / 4’7”
1800mm / 5’10”
2000mm / 6’6”
Working width
1400mm / 4’7”
1800mm / 5’10”
2000mm / 6’6”
Transport width
1700mm / 5’6”
2100mm / 6’10”
2300mm / 7’6”
Transport width
1700mm / 5’6”
2100mm / 6’10”
2300mm / 7’6”
250mm
250mm
250mm
250mm
250mm
250mm
Number of Hammers
12
16
20
Number of Hammers
22
26
30
Number of Belts
7
7
7
Number of Belts
7
7
7
Swing
Swing
Swing
Fixed
Fixed
Fixed
1658kg / 3655lbs
1815kg / 4001lbs
1902kg / 4193lbs
1517kg / 3344lbs
1680kg / 3704lbs
1760kg / 3880lbs
155L / 41 USG
175L / 46 USG
205L / 54 USG
155L / 41 USG
175L / 46 USG
205L / 54 USG
200-260
200-260
200-260
200-260
200-260
200-260
Hammer Type
Weight
HDH Range - with fixed hammers, with tungsten carbide
teeth suited to mulch brush up to 200mm diameter.
SDFH130
80-120L / 21-32 USG
Cutting Diameter
SDFH Range - As above but suited to mulch brush up to
300mm diameter.
SDFH Range
Oil flow L/min
Oil pressure (Bar)
Cutting Diameter
Hammer Type
Weight
Oil flow L/min
Oil pressure (Bar)
HDFH Range - As above but suited to mulch brush up to
300mm diameter.
Key Features
• Working with oil pressure ranges
of 200 to 260psi
Fixed hammers
Options available. Suitable for
managing wooded areas.
• Working with oil flows between
80 to 205 L/min
Versatile cutting
From green waste and vegetation to
• Weight options from 912kg
up to 1,902kg
wooded areas, the Buccaneer Excavator
is capable of clearing any environment.
Used in conjunction with the Excavators
Want to know more about
the Buccaneer Excavator?
slewing action large areas can be cleared
quickly leaving a chipped or mulched finish
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
dependent upon hammer choice.
Alternatively visit: http://www.bomford-turner.com/
forestry/buccaneer-excavator/
Heavy duty drive
7 belt drive system.
71
70
Buccaneer
Excavator Mini
Tree Lopper
Hydraulic operated tree loppers for cutting and
pruning large tree branches.
This lightweight hydraulic mulcher is suitable
for use with smaller excavators ranging from
1.5 to 30 tonnes and will cut branches up to
120mm in diameter.
Cutting capacity up to 450mm diameter (350 model). Attachment
fits excavators from 1.5 tonnes to 14 tonnes.
Key Features
• Working with oil pressures up to 110 bar
The Buccaneer Excavator Mini is available in 5 different
working widths. Available as MDH (Swing hammers)
and MDHF (Fixed hammers).
• Weight options for 190kgs to 575kgs
• Can be fitted on mini excavators
• 360° rotator
Key Features
• Working with oil pressure ranges of
180 to 200 BAR
• Working with oil flows between
45 to 110 L/min
• Weight options from 310kg up to 640kg
• Skids to protect head
• Adjustable working height
Product Specification
Micro Range
Working Width
Cutting Diameter (branches) up to
Weight
Oil Flow L/min
Oil Pressure
MDH Range
Working Width
Want to know more about the
Buccaneer Excavator Mini?
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
forestry/buccaneer-excavator-mini/
Product Specification
800
1000
1200
1400
800mm / 2'6"
1000mm / 3'3"
1200mm / 3'9"
1400mm / 4'6"
30mm / 11/8"
30mm / 11/8”
30mm / 11/8”
30mm / 11/8”
152kg / 335lbs
180kg / 396lbs
208kg / 458lbs
240kg /529lbs
30-35L / 8-9 USG
30-40L / 8-10.5 USG
35-45L / 9-12 USG
40-50L / 10.5-13 USG
150-180
150-180
150-180
150-180
800
1000
1200
1400
1600
800mm / 2'7"
1000mm / 3'3"
1200mm / 3'11"
1400mm / 4'7"
1600mm / 5'3"
Cutting Diameter (branches) up to
60mm / 2.36"
60mm / 2.36"
60mm / 2.36"
60mm / 2.36"
60mm / 2.36”
Weight
310kg / 683lbs
350kg / 771lbs
405kg / 892lbs
430kg / 948lbs
498kg / 1098lbs
45-55L / 12-15USG
60-65L / 16-17USG
60-65L / 16-17USG
70-80L / 18-21USG
70-80L / 18-21USG
180-200
180-200
180-200
180-200
180-200
800
1000
1200
1400
1600
1600mm / 5'3"
Oil Flow L/min
Oil Pressure
MDHF Range
Working Width
800mm / 2'7"
1000mm / 3'3"
1200mm / 3'11"
1400mm / 4'7"
Cutting Diameter (branches) up to
120mm / 4.72"
120mm / 4.72"
120mm / 4.72"
120mm / 4.72"
120mm / 4.72"
Weight
480kg / 1058lbs
545kg / 1202lbs
595kg / 1312lbs
620kg / 1367lbs
640kg / 1411lbs
45-85L / 12-22USG
60-95L / 16-25USG
60-95L / 16-25USG
70-100L / 18-26USG
70-110L / 18-29USG
180-200
180-200
180-200
180-200
180-200
Oil Flow L/min
Oil Pressure
Tree Lopper
Want to know more about
the Tree Lopper?
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
forestry/tree-lopper/
TL150
TL250
TL350
Weight
190Kgs
325Kgs
575Kgs
Working Pressure
210 Bar
210 Bar
210 Bar
Softwood Cutting Capacity
200mm
300mm
400mm
Hardwood Cutting Capacity
150mm
250mm
350mm
73
72
REMOTE
Wirelessly
Operated
Remote controlled flail mowers offer fast, effective
and safe vegetation control on steep, remote
and challenging terrains.
The wide variety of attachments available for this range - which include
dozer blades, sweepers, loaders, snow blowers and rakes - offer an
extremely versatile remote controlled solution.
Remote Range
Flailbot Mini
74
Flailbot Compact
76
Flailbot Original
78
Flailbot Extra
80
Flailbot Supreme
82
75
74
Features & Specification
Max Slope
0-7 km/h
Weight
860kg
25.7 kW / 35 Cv
Max Torque
98 Nm @ 1800 rpm
Intake
Aspirated
Cooling
Liquid
Air Filter
Dry
Diesel Tank Capacity
6 Litres
50 Litres max @ 2750 rpm
Tool Pressure
250 Bar max
Oil Tank Capacity
25 Litres
Operating Oil Quantity
35 Litres
Brand
Scanreco
Frequency
434 Mhz
Electrical Circuit
Operating Voltage
2570 / 101 ¼ ”
Battery
12 Vcc
150m
Rechargeable
50 Amp
Battery
18 Ah
Standard equipment
Flashing beacon and full machine/
engine guards and covers fitted as
standard on all models.
47
°
35°
• 55 degree working angle
Tool Capacity
Range Signal
• 3 cylinder Yanmar diesel engine
• Closed circuit piston pump cutting circuit
Closed Circuit Piston Pump
Controls
20 Litres
Engine Oil Quantity
200 Bar max
Tool
1,331 Litres
Power
Gear Pump
11 Litres max @ 2750 rpm
Services Pressure
3 Cylinders, Diesel
Alternator
• 20 litre fuel capacity
280 Bar max
Services Capacity
Yanmar
Engine Size
Key Features
55 Litres max @ 2750 rpm
Displacement Pressure
Services
Model
With a punchy 35hp engine, whilst it appears to be small,
the Flailbot Mini model is very capable. Cutting head size is
1300mm (51”) and this makes this model perfect for small
access sites, and to be transported on smaller vehicles
between sites.
Displacement Capacity
Integral rollbar
Standard on all Flailbot models,
and offers the additional feature
of lift points.
1723 / 67 ¾”
1429 / 56 ¼”
1723 / 67 ¾”
660 / 25 ¾”
• Hydrostatic transmission
Flailbot Mini
2570 / 101 ¼ ”
1320 / 52”
1370 / 54”
Alternatively visit:
http://www.bomford-turner.com/
remote/flailbot-mini/
1300 Flail Head
210 kg / 462 lbs
??? / ???”
1070 kg / 2,358 lbs
975 / 38 ¼”
Flailbot with Oil & Fuel
35°
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Engine Size / Capacity
35hp / 1,331 Litres
47
°
Want to know more about
the Flailbot range?
1064 / 41 ¾”
Weights & Dimensions
1295
1723//51”
67 ¾”
1429 / 56 ¼”
1723 / 67 ¾”
660 / 25 ¾”
1441 / 56 ¾”
160 / 6 ¼”
160 / 6 ¼”
??? / ???”
Giving maximum accessibility to
difficult areas whilst remaining well
protected with full engine covers.
Brand / Make
Tandem piston pump with variable
engine size and closed circuit
Hydrostatic
Speed
Engine
Displacement
55°
Transmission
Sleek low design
Mini (35hp)
Hydraulic System
1064 / 41 ¾”
The Smallest of the Flailbot range, but packed
with all the innovative features of the larger
models. Easy access to site, with a lower
gross weight and smaller foot print.
Flailbot
Mini (35hp)
975 / 38 ¼”
Flailbot
Mini
Flailbot
Operation
77
76
Features & Specification
Max Slope
0-7 km/h
Weight
940kg
1,496 Litres
112 Nm @ 1800 rpm
Intake
Turbocharged
Cooling
Liquid
Air Filter
Dry
Diesel Tank Capacity
6 Litres
Electrical Circuit
Operating Voltage
12 Vcc
Alternator
Battery
35 Litres
Brand
Scanreco
Frequency
434 Mhz
150m
2570 / 101 ¼ ”
Rechargeable
18 Ah
Working range
All Flailbot models have an impressive
working range of 150m (492’)
47
°
35°
Engine protection covers easily
removed for fast and simple
access for maintenance.
1723 / 67 ¾”
2570 / 101 ¼ ”
1150 kg / 2,535lbs
1300 Flail Head
210 kg / 462 lbs
1370 / 54”
??? / ???”
1320 / 52”
975 / 38 ¼”
Flailbot with Oil & Fuel
660 / 25 ¾”
47
°
40hp / 1,496 Litres
1064 / 41 ¾”
Engine Size / Capacity
1723 / 67 ¾”
1429 / 56 ¼”
35°
Alternatively visit:
http://www.bomford-turner.com/
remote/flailbot-compact/
25 Litres
Operating Oil Quantity
Easy Access
Flailbot Compact
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
250 Bar max
Oil Tank Capacity
65 Amp
Weights & Dimensions
Want to know more about
the Flailbot range?
52 Litres max @ 2750 rpm
Tool Pressure
Battery
• Manually wind out track frame
• Full engine covers as standard
Tool Capacity
Range Signal
• 1300mm (51”) cutting head
• Auto hydraulic track tension system
Closed Circuit Piston Pump
Controls
20 Litres
Engine Oil Quantity
200 Bar max
Tool
30 kW / 40.8 Cv
Max Torque
Gear Pump
13 Litres max @ 2750 rpm
Services Pressure
3 Cylinders, Diesel
Power
• Perkins 40hp industrial engine
280 Bar max
Services Capacity
Perkins
Engine Size
Key Features
55 Litres max @ 2750 rpm
Displacement Pressure
Services
Model
The compact size, but powerful 40hp Perkins engine makes
the compact model a contractors first choice. With the added
feature of manual wind out track width as standard, and a
number of attachments available.
Displacement Capacity
??? / ???”
Hindged cooler guard for
easy access.
Brand / Make
Tandem piston pump with variable
engine size and closed circuit
Hydrostatic
Speed
Engine
Displacement
55°
Transmission
Radiator cooler cover
Compact (40hp)
Hydraulic System
1064 / 41 ¾”
Flailbot Compact carries all the same features
as the Mini model, with the bigger Flailbot
original 40hp Perkins industrial powerplant.
Flailbot
Compact (40hp)
975 / 38 ¼”
Flailbot
Compact
Flailbot
Operation
1295
1723//51”
67 ¾”
1429 / 56 ¼”
1723 / 67 ¾”
660 / 25 ¾”
1441 / 56 ¾”
160 / 6 ¼”
160 / 6 ¼”
150 / 6”
150 / 6”
1670 / 65 ¾”
79
78
Features & Specification
Flailbot
Original
The original Flailbot, designed for challenging
terrains with the powerful industrial Perkins
Diesel engine fitted as standard, providing the
ultimate in power to weight performance in the
remote controlled track bank mower market.
Flailbot
Speed
0-7 km/h
Weight - Fixed Profile
1200kg
*
Weight - Extendable Profile
280 Bar max
Gear Pump
Brand / Make
Services Pressure
Perkins
Model
1,496 Litres
Power
30 kW / 40.8 Cv
Max Torque
112 Nm @ 1800 rpm
Intake
Turbocharged
Cooling
Liquid
Air Filter
Dry
Diesel Tank Capacity
Closed Circuit Piston Pump
Tool Capacity
58 Litres max @ 2750 rpm
Tool Pressure
280 Bar max
Oil Tank Capacity
50 Litres
Operating Oil Quantity
60 Litres
Controls
22 Litres
Engine Oil Quantity
200 Bar max
Tool
3 Cylinders, Diesel
Engine Size
13 Litres max @ 2750 rpm
Brand
Scanreco
Frequency
434 Mhz
Range Signal
7 Litres
150m
Battery
Electrical Circuit
Rechargeable
12 Vcc
Alternator
65 Amp
Battery
Precise control
1250 / 49 ¼”
1250 / 49 ¼”
60 Ah
Hydraulic front hood
The remote control, operating all
Flailbot functions has a range of
150m (492’)
45°
45°
• Weight options from 310kg up to 640kg
65 Litres max @ 2750 rpm
Displacement Pressure
Services Capacity
Engine
Key Features
Displacement Capacity
Services
1280kg
*
Individual tracks can be extended
by up to 250mm / 10”.
Tandem piston pump with variable
engine size and closed circuit
Hydrostatic
Operating Voltage
Operational via controls with
electronic interlock for safety
dependent on rotor direction.
35°
35°
• Working with oil flows between
45 to 110 L/min
Displacement
55°
Transmission
Excellent grip
characteristics
Original (40hp)
Hydraulic System
Max Slope
Covering challenging, steeply inclined terrain with a traditional
man-on-board power mower puts a driver at risk. Remotely
controlled wirelessly, Flailbot provides ultimate mowing
capability whilst keeping the operator at a safe distance.
• Working with oil pressure ranges of
180 to 200 BAR
Flailbot
Original (40hp)
Operation
310
310
230
230
12 ¼”
12 ¼”
• Skids to protect head
9” 9”
1550
/ 61”
1550
/ 61”
• Adjustable working height
660
/ 25
¾”¾”
660
/ 25
2740
/ 107
¾”¾”
2740
/ 107
Flailbot Original
1390
/ 54
¾”¾”
1390
/ 54
850
/ 33
½”½”
850
/ 33
Alternatively visit:
http://www.bomford-turner.com/remote/flailbot/
Flailbot with Oil & Fuel
1280 kg / 2,822 lbs
1500 Flail Head
225 kg / 496 lbs
45°
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Engine Size / Capacity
40hp / 1,496 Litres
35°
Want to know more about
the Flailbot range?
1250 / 49 ¼”
Weights & Dimensions
310
230
12 ¼”
250
250
9”
1550 / 61”
160
/ 6/¼”
160
6 ¼”
2740 / 107 ¾”
160
/ 6/¼”
160
6 ¼”
1490
/ 58
½”½”
1490
/ 58
1636
/ 45
½”½”
1636
/ 45
1390 / 54 ¾”
850 / 33 ½”
250
250
10”10”
660 / 25 ¾”
10”10”
1810
/ 71
¼”¼”
1810
/ 71
81
80
Features & Specification
A machine for all terrains and types
of contract – that command a little more
power the Flailbot Extra is the machine
of choice. Running the same chassis
components as the Standard 40hp
machine, albeit with a more powerful
engine producing 50hp.
Max Slope
Hydrostatic
Speed
0-7 km/h
Weight - Fixed Profile
1280kg
*
Shredder head
Weight - Extendable Profile
Back to back blades for
shredding green vegetation.
Engine
*
• 29 litre fuel tank capacity
Tandem piston pump with variable
engine size and closed circuit
Displacement Capacity
75.6 Litres max @ 2700 rpm
Displacement Pressure
320 Bar max
Services
1360kg
Gear Pump
Services Capacity
Brand / Make
Services Pressure
Perkins
Model
4 Cylinders, Diesel
Engine Size
2,200 Litres
Power
36.3 kW / 49.4 Cv
Max Torque
140 Nm @ 1800 rpm
Intake
Aspirated
Cooling
Liquid
Air Filter
Dry
Diesel Tank Capacity
13 Litres max @ 2700 rpm
200 Bar max
Tool
Closed Circuit Piston Pump
Tool Capacity
75.6 Litres max @ 2700 rpm
Tool Pressure
280 Bar max
Oil Tank Capacity
50 Litres
Operating Oil Quantity
60 Litres
Controls
29 Litres
Brand
Scanreco
Frequency
434 Mhz
Range Signal
10 Litres
150m
Battery
Electrical Circuit
Operating Voltage
Rechargeable
12 Vcc
Alternator
Variable track width
65 Amp
Battery
44 Ah
45°
Fixed tooth forestry
mulcher
For particularly difficult or steep conditions,
track width can be increased individually by
250mm / 10”, increasing the footprint for
added stability and grip.
35°
• 4 Cylinder 50hp Perkins engine
Displacement
55°
Transmission
The powerful 50hp Perkins engine guarantees you will
never run out of power. The Flailbot Extra can cope with all
types of operations from general grass cutting and scrub/
forestry cutting to stump grinding.
Extra (50hp)
Hydraulic System
Engine Oil Quantity
Key Features
Flailbot
Extra (50hp)
1250 / 49 ¼”
Flailbot
Extra
Flailbot
Operation
Suitable for managing wooded
areas and provideing a chipped
wood finish.
410 / 16 ¼”
• Closed circuit tandem piston pump circuit
1550 / 61”
230 / 9”
660 / 26”
2850 / 112 ¼”
• 150m working range
• 55 degree max working angle
850 / 33 ½”
Flailbot Extra
Alternatively visit:
http://www.bomford-turner.com/
remote/flailbot-extra/
45°
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Engine Size / Capacity
50hp / 2,200 Litres
Flailbot with Oil & Fuel
1585 kg / 3,494 lbs
35°
Want to know more about
the Flailbot range?
1250 / 49 ¼”
Weights & Dimensions
1500 Flail Head
225 kg / 496 lbs
410 / 16 ¼”
1550 / 61”
2850 / 112 ¼”
850 / 33 ½”
230 / 9”
660 / 26”
1495 / 58 ¼”
1635 / 64 ¼”
160 / 6 ¼”
160 / 6 ¼”
1360 / 53 ½ ”
250 / 9 ¾”
250 / 9 ¾”
1860 / 73 ¼”
83
82
Features & Specification
Flailbot
Supreme
The Flagship model – Ultimate horse power
with the 70hp engine giving maximum power
and control to the operators finger tips.
Flailbot
Supreme (70hp)
Max Slope
0-7 km/h
Weight
2200kg
Brand / Make
Perkins, Tier 4 Final
4 Cylinders, Diesel, Direct Injection
Engine Size
2,226 Litres
Power
50 kW / 68 Cv
Max Torque
208 Nm @ 1800 rpm
Intake
Fitted with a tier 4 Final Perkins engine, producing over 200 NM
of torque making the Flailbot Supreme the most powerful model
in the range. The Supreme is fitted as standard with hydraulic
adjustable track width and auto track tension system.
Turbocharged aftercooled
Cooling
Liquid
Air Filter
40 Litres
Engine Oil Quantity
10.6 Litres
300 Bar max
Gear Pump
Services Capacity
15 Litres Max @ 2500 rpm
Services Pressure
200 Bar max
Tool
Closed Circuit Piston Pump
Tool Capacity
83 Litres Max @ 2500 rpm
Tool Pressure
280 Bar max
Oil Tank Capacity
80 Litres
Operating Oil Quantity
90 Litres
Brand
Scanreco
Frequency
434 Mhz
Range Signal
Electrical Circuit
Operating Voltage
150m
Battery
12 Vcc
Alternator
• 4 Cylinder 70HP Perkins engine
113 Litres max @ 2500 rpm
Displacement Pressure
Controls
Dry
Diesel Tank Capacity
Key Features
Displacement Capacity
Services
Engine
Model
Tandem piston pump with variable
engine size and closed circuit
Hydrostatic
Speed
Cutting through heavy undergrowth
to allow easy access.
Supreme (70hp)
Displacement
55°
Transmission
Clearing areas of
dense vegetation
Flailbot
Hydraulic System
Operation
Rechargeable
85 Amp
Battery
3415 / 134 ½”
70 Ah
Shredding head
• Tier 4 final engine emissions
Fitted with rear protection bar
and towing anchor point.
45°
• 150m working range
1350 / 53 ¼”
Rear protection
32°
• 40 litre fuel tank capacity
1264 / 49 ¾”
Fitted as standard with 1650mm
shredding head and pushbar.
• Hydraulically adjustable track frame
2042 / 80 ¼”
2572 / 101 ¼”
Flailbot Supreme
3415 / 134 ½”
Weights & Dimensions
Alternatively visit:
http://www.bomford-turner.com/
remote/flailbot-supreme/
1650 Flail Head
450 kg / 992 lbs
634 / 25”
2650 kg / 5,842 lbs
45°
Flailbot with Oil & Fuel
1350 / 53 ¼”
Engine Size / Capacity
70hp / 2,226 Litres
32°
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
1000 / 39 ½”
1264 / 49 ¾”
Want to know more about
the Flailbot range?
843 / 33 ¼”
2042 / 80 ¼”
2572 / 101 ¼”
1650 / 65”
843 / 33 ¼”
1000 / 39 ½”
1860 / 73 ¼”
350 / 13 ¾”
350 / 13 ¾”
1600 / 63”
400 / 15 ¾”
400 / 15 ¾”
2400 / 94 ½”
85
84
CULTIVATION
Agricultural
Cultivators
A range of low cost surface cultivators, ranging
from 2.0m to 5.0m working widths. 3 point
linkage mounted and surface driven.
Bomford Turner have a history of producing quality simple cultivators.
The goal has always remained the same; simple, low maintenance
and cost effective. Our Dyna-Drive ground-driven cultivator meets
each of these goals and is offered in a range of working widths.
Cultivation Range
Dyna-Drive
86
87
86
Product Specification
Dyna-Drive
Simple and effective ground driven cultivator, for
use on all types of soil at high speed.
Designed in conjunction with the NIAE, the Dyna-Drive enables
successive cereal crops to be sown at reduced costs and in faster
times than with traditional methods of cultivation.
Dyna-Drive
Dual rotors
Two rotors connected via a
single drive.
1.6m
2.0m
2.6m
3.0m
4.0m
5.0m
Flex 4.0m
Flex 6.0m
Working Width
1.6m / 5' 3"
2.0m / 6' 7"
2.6m / 8' 6"
3.0m / 9' 10"
4.0m / 13' 1"
5.0m / 16' 5"
4.0m / 13' 1"
6.0m / 19' 8"
Transport Width
2.0m / 6' 7"
2.4m / 7' 11"
3.0m / 9' 10"
3.4m / 11' 2"
4.4m / 14' 5"
5.4m / 17' 8"
2.5m / 8' 2"
2.5m / 8’ 2”
Tractor Power Required
37-52 kW
50-70 bhp
45-70 kW
60-90 bhp
60-90 kW
80-120 bhp
100 kW
90-130 bhp
140 kW
30-180 bhp
180 kW
160-240 bhp
195 kW
220-260 bhp
220 kW
250-300 bhp
Output Guide 7.5 mph (12kph)
2.0 ha/hr
4.94 ac/hr
2.42 ha/hr
6.05 ac/hr
3.13 ha/hr
7.82 ac/hr
3.60 ha/hr
9.00 ac/hr
4.80 ha/hr
12.00 ac/hr
6.00 ha/hr
16.00 ac/hr
4.80 ha/hr
12.00 ac/hr
7.20 ha/hr
20.00 ac/hr
1050 kg
2315 lb
1040 kg
2293 lb
1320 kg
2911 lb
1480 kg
3263 lb
2080 kg
4586 lb
2620 kg
5777 lb
3500 kg
7716 lb
3950 kg
8708 lb
Weight Including Crumbler
Number of Cleaner Tines
104
124
160
184
244
304
248
294
Roller Options Available
Crumbler
Packer
Crumbler
Packer
Crumbler
Packer
Crumbler
Packer
Crumbler
Packer
Crumbler
Packer
Crumbler
Packer
Crumbler
Packer
Key Features
• 1.6, 2.0, 2.6, 3.0, 4.0 or 5.0m widths
• 4.0 and 6.0m Flex options also available
Benefits of Dyna-Drive
• Maintenance free drive system
Low running costs as a result of no
• Breaks up stubble, breaks down ploughing
PTO drive. This reduces power
• No PTO required
requirement so forward speed is not
• Crumbler or Packer roller options
restricted, so large areas can be covered
quickly. Average forward speed of
12 km/hr and then typically outputs
Front rotor
of 3.13 ha/hr up to 6.0 ha/hr can be
Tines lift soil and turns into rear
rotor to break down soil structure.
achieved dependent upon soil type.*
*Based on 5m working width
Want to know more about
the Dyna-Drive range?
Scan the QR code to the left with a
smart phone or tablet and compatible
app to instantly view the page.
Alternatively visit: http://www.bomford-turner.com/
cultivation/dyna-drive/
Rear crumbler
To further break down soil structure.
Crumbler
Roller
Packer
Roller
Break down soil
clods to give a
fine finish ready
for drilling.
Consolidate and
break down soil
to reduce soil
erosion.
89
88
ACCESSORIES
Fittings &
Controls
There are a wide range of fittings and controls
to complement your Bomford Turner machine.
Cutting heads range from 950mm to 2m with a choice of flails to suit
every application while the many different attachments provide
versatile working solutions. Meanwhile, our range of easy-to-use
control options offers something for every budget.
Fittings & Controls
Heads
90
Attachments
92
Flails
94
Tractor Fittings
96
Controls
98
91
90
Heads
Flail head fitting is dependent on the model purchased, with
a choice available on most.
The range starts with 950mm cutting width and rises to a full 2m. Most heads offer a
choice of 7 flails and the ability to adjust the rotor speed to suit verge or hedge.
Key Features & Options
Hydraulic Roller
ISMP
Hydraulic Rollers enable the operator to
raise the roller to a higher position, remotely
from inside the cab when cutting hedge.
The ISMP head enables the whole shaft
assembly to be changed saving considerable
down time when different flails are required
for different jobs. Pro-Trim, Pro-Cut and
ISMP heads are equipped with ‘Anti Wrap’
bearings to reduce the risk of debris fouling
the all important rotor bearings.
Available on Pro-Trim and Pro-Cut
Double Helix Shaft
Double helix shaft technology (a Bomford
innovation) delivers up to 45% overlap of the
flails, belt driven protection against unseen
debris and close-in cutting.
Available on Pro-Trim and Pro-Cut
Variable Track Brackets
The new VTB has been designed for
operators who need to work in restrictive
areas such as narrow lanes - perfect for
getting up close and personal to hedges on
rural roads and country estates.
950 LW
1107 MW
Pro-Trim 1.5
Pro-Cut 1.2
Pro-Cut ISMP 1.2
The 950 LW head is lighter weight for smaller
machines. Direct driven from an end drive
motor reducing the overall weight as there is
no need for belts and pulleys.
The 1107 MW heads are of medium weight
but with all the advantages that belt drive
gives, close-in cutting and damage limitation
from unseen obstacles.
The Pro-Trim 1.5 offers double helix shaft
technology, belt driven protection and
interchangeable shaft operations for speedy
flail changes.
The Pro-Cut 1.2 is made of Domex steel
offering double helix shaft technology, belt
driven protection and interchangeable shaft
operations for speedy flail changes.
The Pro-Cut ISMP 1.2 has all the features of
the Pro-Cut 1.2 but with the addition of ISMP
which allows the entire shaft assembly to be
changed out saving down time.
Head Weight
140kg
309lbs
Compatible with
Head Weight
145 - 170kg
309 - 375lbs
Compatible with
Raven (74 Litres)
Raven (74 Litres)
Raven (74 Litres)
Kestrel E (74 Litres)
Kestrel E (74 Litres)
Kestrel E (74 Litres)
Kite (74 Litres)
Head Weight
260 - 300kg
573 - 661lbs
Head Weight
280 - 300kg
617 - 661lbs
Head Weight
320 - 350kg
705 - 772lbs
Compatible with
Compatible with
Hawk (104 Litres)
Falcon (125 Litres)
B80M (125 Litres)
Compatible with
Falcon (125 Litres)
B80M (125 Litres)
Buzzard (125 Litres)
B81.81 (125 Litres)
Buzzard (125 Litres)
B81.81 (125 Litres)
B71 (125 Litres)
Eagle (137 Litres)
B71 (125 Litres)
Eagle (137 Litres)
Available on Pro-Trim and Pro-Cut
Choosing the
right Head
Belt vs Direct Drive
The belt housing on belt driven heads is
typically 75mm narrower than the end drive
motors enabling the head to get closer in to
the hedge or fence. Belt drives offer shock
protection when the rotor hits an obstacle
where direct shaft driven end drive can
sheer, resulting in expensive repairs and
prolonged down time.
1257 LW
Pro-Trim 1.2
Pro-Trim ISMP 1.2
Pro-Cut 1.5
2m HD Head
The 1257 LW head is lighter weight for
smaller machines. Direct driven from an end
drive motor reducing the overall weight as
there is no need for belts and pulleys.
The Pro-Trim 1.2 offers double helix shaft
technology, belt driven protection and
interchangeable shaft operations for speedy
flail changes.
The Pro-Trim ISMP 1.2 has all the features of
the Pro-Trim 1.2 but with the addition of ISMP
which allows the entire shaft assembly to be
changed out saving down time.
The Pro-Cut 1.5 is made of Domex steel
offering double helix shaft technology, belt
driven protection and interchangeable shaft
operations for speedy flail changes.
The 2m HD head offers the widest cutting
width on the market, heavy duty build fitted
with an MP44 flail and 150 roller.
145 - 170kg
309 - 375lbs
Compatible with
Scan the QR code to the left with a smart device and app to view the page.
Alternatively visit: www.bomford-turner.com/landscape/fittings-and-controls/heads
Points to consider include:
• Compatibility with your
arm mower
• Frequency of operation
Head Weight
Want to know more about our Heads?
Selecting the right head can seem
like a difficult choice given the
many options available.
Head Weight
240 - 260kg
529 - 573lbs
Compatible with
Robin (50 Litres)
Raven (74 Litres)
Kestrel E (74 Litres)
Kite (74 Litres)
Kestrel E (74 Litres)
Kestrel S (88 Litres)
Hawk (104 Litres)
Head Weight
240 - 260kg
529 - 573lbs
Head Weight
300 - 340kg
661 - 750lbs
Head Weight
Compatible with
Compatible with
Hawk (104 Litres)
Falcon (125 Litres)
B80M (125 Litres)
Falcon (125 Litres)
Buzzard (125 Litres)
B81.81 (125 Litres)
Buzzard (125 Litres)
B71 (125 Litres)
Eagle (137 Litres)
450 - 500kg
992 - 1102lbs
• Grass or hedge cutting
Compatible with
For further information
please speak to one of our
experienced team.
93
92
Medium Sheartrim
For cutting material up to 40mm (11/2”).
Attachments
A wide selection of attachments is available to improve the
versatility and therefore the profitability of the Bomford arm
mowers range.
Bomford attachments are built with the same attention to detail and robust
qualities that you have come to expect from the Bomford machinery range.
Compatible with
Sheartrims
Rotary Heads
Pro-Saw
Pro-Saw Loader Frame
Ideal for longer growth material.
Available with blades or heavy-duty
chain cutting options, operating in
either vertical or horizontal plane,
its 2.25msq cutting area makes short
work of even the most challenging tasks.
With widths of 1.6m, 2.0m and 2.4m, the
Pro-Saw comprises four circular saw blades
capable of cutting through branches of up to
20cm (8”).
A convenient choice for farmers and
contractors wishing to utilise their front
loaders for hedge and tree cutting.
All Pro-Saw attachments have protection for
over speed and pressure to ensure safety.
Key Features
• Simple square section mounting
240 - 260kg
529 - 573lbs
Head Weight
Head Weight
145 - 170kg
320 - 375lbs
Compatible with
Head Weight
• Simple hydraulic connection
Compatible with
• Vast choice of attachments to maximise
usage from your arm mower
Falcon (125 Litres)
380 - 450kg
838 - 992lbs
Falcon (125 Litres)
Kestrel E (74 Litres)
Buzzard (125 Litres)
Kestrel S (88 Litres)
Buzzard (125 Litres)
Head Weight
Raven (74 Litres)
Eagle (137 Litres)
179-193kg
394-425lbs
Compatible with
Tractor Loaders
Telehandlers
Reciprocating cutter bars for cutting material
in enclosed areas where the cut material
needs to be controlled. A range of sizes
are available.
Raven (74 Litres)
Falcon (125 Litres)
Kestrel E (74 Litres)
Buzzard (125 Litres)
Kestrel S (88 Litres)
Eagle (137 Litres)
Hawk (104 Litres)
Standard Sheartrim
Heavy Sheartrim
For cutting material up to 25mm ( 1”).
For cutting material up to 100mm (4”).
Head Weight
250-280kg
551 - 617lbs
Compatible with
180-240kg
397 - 529lbs
Head Weight
Compatible with
Raven (74 Litres)
Falcon (125 Litres)
Kestrel E (74 Litres)
Falcon (125 Litres)
Kestrel E (74 Litres)
Buzzard (125 Litres)
Kestrel S (88 Litres)
Buzzard (125 Litres)
Kestrel S (88 Litres)
Eagle (137 Litres)
Hawk (104 Litres)
Eagle (137 Litres)
Hawk (104 Litres)
Hawk (104 Litres)
Choosing the right
Attachment
Weed Brush
Ditch Cleaner
Debris Blower
Collector Head
Hydraulic Roller
Removes wild herbs and weeds on open
cycling paths, pavements and road verges.
The debris is moved to the side as the head
travels forward.
Designed for use with a range of side-arm
mowers, simplifying the maintenance of
roadside ditches and grips. Two models are
available, manual or hydraulic.
Controlled from within the cab and driven by
its own hydraulic motor, the fully adjustable
Debris Blower effortlessly removes hedge
and verge trimmings from the roadside.
Ingenious design combining a conventional
flail head and rotor, along with a twin helical
auger collecting flail cuttings. Suction hose
and vacuum trail can be fitted (not included).
Easy roller adjustment without leaving the
cab. A simple tractor spool operated twin ram
system allows adjustment during continuous
work on either grass or hedge cutting.
Head Weight
145 - 170kg
320 - 375lbs
Compatible with
Want to know more about our Attachments?
Scan the QR code to the left with a smart device and app to view the page.
Alternatively visit: www.bomford-turner.com/landscape/fittings-and-controls/attachments
Selecting the right attachment can
seem like a difficult choice given
the many options available.
Head Weight
240 - 260kg
529 - 573lbs
Compatible with
Raven (74 Litres)
Falcon (125 Litres)
Falcon (125 Litres)
Kestrel S (88 Litres)
Buzzard (125 Litres)
Buzzard (125 Litres)
Hawk (104 Litres)
Eagle (137 Litres)
Attachment Weight
80kg
176lbs
Compatible with
Eagle (137 Litres)
Kestrel E (74 Litres)
Falcon (125 Litres)
Kestrel S (88 Litres)
Buzzard (125 Litres)
Hawk (104 Litres)
Head Weight
420kg
926lbs
Attachment Weight
280-380kg
617 - 838lbs
Compatible with
Compatible with
Falcon (125 Litres)
Pro-Trim 1.2
Pro-Cut 1.2
Pro-Trim 1.5
Pro-Cut 1.5
Points to consider include:
• Compatibility with your
arm mower
• Style/type of operation
looking to perform
• Available budget
For further information
please speak to one of our
experienced team.
95
94
Flail Compatibility Options
Standard
Flails
– Not Available
Flails
No. of Flails
BB
MP44
HS60
Pro Flail
T 40
T 60
True Cut
Bushmaster
Compatible with
Over the decades we have designed, adapted and invented
a range of flails for our cutting heads to suit every purpose.
The vast majority of our heads now offer the ability to fit any one of these eight flail
designs. Some are available as standard and some are optional.
The rotors in our flail heads have
a twin helical pattern, giving a
wider flail overlap than previous
models and our competitors,
ensuring a cleaner, more
complete cut.
Optional
BB Flail 40mm
MP44 Multi Purpose
Bootee Flail
950mm LW with 102mm roller
28
1257mm LW with 102mm roller
36
1257mm LW with 150mm roller
36
1107mm LW with twin back to back 115mm roller
32
1.2m Pro-Trim with 115mm roller
32
1.2m Pro-Trim with 150mm roller
32
1.5m Pro-Trim with 115mm roller
40
1.5m Pro-Trim with 150mm roller
40
1.2m Pro-Trim ISMP with 115mm roller
24
1.2m Pro-Trim ISMP with 150mm roller
24
1.2m Pro-Cut with 115mm roller
32
1.2m Pro-Cut with 150mm roller
32
1.5m Pro-Cut with 115mm roller
40
1.5m Pro-Cut with 150mm roller
40
Choosing the right Flail
Selecting the right flail can seem like a difficult
choice given the many options available.
All of our flails will fit onto the same rotor apart from
the Bushmaster which requires a heavier duty rotor
because of the weight.
Points to consider include:
• Frequency of cut
• Material to cut – grass, hedges or a
combination of both
For further information please speak to
one of our experienced team.
Reversible shackle mounted back to
back flail. The narrow profiles and
sharp cutting edges give a clean cut
with low power consumption.
Dual purpose hedge and vegetation
flail Drop forged and will cut material
up to 30mm (11/2”).
HS60 Bootee Flail
Pro Flail 40mm
T Flail 40mm
T Flail 60mm
True-Cut
Bushmaster
Dual purpose hedge and vegetation
flail. Drop forged, will cut up to
35mm (11/2”). Interchangeable with
the ‘T’ Flail 60mm.
For annual hedge trimming and
vegetation control.
Dual purpose hedge and vegetation flail
Drop forged and will cut material up to
30mm (11/2”).
The ‘Professionals’ choice. Gives an
excellent finish on hedges from six months
growth to 50mm (2”) thick. Interchangeable
with the HS60 Bootee Flail.
A longer body producing a faster tip speed. A more
pronounced leading edge on the shaft removes
unwanted build up of material and allows the flail
to retain better cutting characteristics delivering
‘cutting hedge perfection’.
The Bushmaster flail is very heavy
duty and able to cut growth of up to
100mm (4”). Perfect for three year
hedge growth or brush cutting.
1.2m Pro-Cut ISMP with 115mm roller
32
1.2m Pro-Cut ISMP with 150mm roller
40
2m HD Head
54
Flail Layouts
All our flails are
mounted in a helical
pattern around the
cutting rotor. The choice
of flails for intended
purpose and number
are dictated by the size
and model of the head
they are intended for.
Want to know more about our Flails?
Scan the QR code to the left with a smart device and app to view the page.
Alternatively visit: www.bomford-turner.com/landscape/fittings-and-controls/flails
SYSTEM 1: HEAVY DUTY LINKAGE
Tractor
Fittings
SYSTEM 1: CHAIN STABILISER KIT
96
All Bomford hedge cutters attach to the tractor
using 1 or 2 styles of mounting systems.
• Three Point Linkage
• Heavy Duty Linkage
System 2
SYSTEM 2: AXLE BRACKETS
• A Frame
SYSTEM 1: A FRAME
• Chain Stabiliser Kit
System 1
System 2
Chain Stabiliser Kit
Three Point Linkage
Axle Bracket
Simple to use, and cost effective solution
to a stabiliser kit. Fitted using some “key
hole” plates on the top link and lower
link pins, the desired working height is
selected on the tractor hydraulics, the
chains are then slotted through the key
hole plates, lower the weight from the
tractor hydraulics, and the chains become
tight, and control the lateral stability.
This type of mounting frame is fitted
to the machine before fitting to the
tractor. The tractor’s 3 point linkage is
then attached to the machine and the
mounting frame.
Axle brackets are incorporated, where
necessary, with stabiliser and cab
suspension mounting positions. The
mounting forks of the machine then
attach to the axle brackets and are locked
on using removable chocks
that clamp around the axle bracket
mounting pin.
A Frame
System 1
Three point linkage kits that allow quick and easy attachment to the
tractor using the standard three point mounting and machine support
frame. There are 4 types of three point mounting kits:
97
Axle brackets allow rigid mounting of the machine to the tractor with no
sway or movement between tractor and machine. The axle brackets are
attached to the underside of the tractor’s rear axle.
• Axle Bracket
This type of mounting frame is fixed and
fitted to the tractor’s top link clevis, the
top link is then fitted between the frame
and the machine, the lift arms fitted to
the lower pins of the machine and the
machine lifted to working height.
With the machine at the correct height
the frame can be bolted to the machine
using one of the series of attachment
holes. The machine is levelled using the
top link and the lift arms lowered so that
the machine is carried on the frame and
not supported by the tractor’s hydraulic
lift arms. The check chains are tightened
to prevent sideways movement.
Scan the QR code to the left with a smart device and app to view the
page. Alternatively visit: www.bomford-turner.com/landscape/
fittings-and-controls/tractor-fittings
SYSTEM 2: SUBFRAME
Want to know more about our Tractor Fittings?
SYSTEM 1: THREE POINT LINKAGE
• Subframe
The machine is then lifted to its working
height and the telescopic support rods
locked via pins to hold the machine at the
correct height.
The machine is levelled using the top
link and the lift arms lowered so that the
machine is carried on the frame and not
supported by the tractor’s hydraulic lift
arms. The check chains are tightened to
prevent sideways movement.
The machine is held in position at its
working height by means of a mounting
yoke that is fitted to the tractor’s drop
arms and the centre lower part of the
machine’s mainframe. The tractor’s drop
arms are lowered to their lowest position
and the machine is levelled by the screw
adjustment of the tractor’s drop arms.
Heavy Duty Linkage
Subframe
Heavy duty three point linkages provide
maximum stability for larger arm mowers
such as the Hawk 6.5T and the Falcon
range when three point mounted.
On Kestrel S, Hawk and Falcon machines,
the sub-frame and axle brackets may be
specified as an alternative to the three
point mounting system. On all Buzzard
and Eagle machines axle mount is
standard.
This linkage is suitable for Cat II and Cat
III, three point linkages and for machines
up to 6.5m reach. This heavy-duty linkage
can also be used in conjunction with a
tractor’s Euro type hitch.
System 1
A Frame
Raven
Kestrel E
Osprey
Three Point Linkage
Heavy Duty Linkage
Microklippa
Kite
Robin
Kestrel
Hawk
Points to consider when choosing
the right fitting include:
• Compatibility of machine
to tractor
• Length of reach on the arm
mower being fitted
(we generally recommend axle
brackets for over 6.5m arms)
System 2
Chain Stabiliser Kit
Choosing the
right Fittings
Axle Bracket
Subframe
Hawk 6.5T
Hawk
Buzzard
Falcon
Falcon
Eagle
Buzzard
Hawk
Eagle
• Frequency that machine will be
removed from tractor
For further information
please speak to one of our
experienced team.
99
98
Controls
With a focus on ease of operation, our control options
provide a suitable solution to accommodate your
personal requirements and suit various budgets.
Control options range from the simple, much-used cable control through to
the fully adjustable ICS Intelligent Control System that can be programmed/
personalised by the operator.
Key Features
• Simple mounting systems
• Easy operation
• Full instruction manuals
Control Compatibility Options
Standard
Optional
Controls
Not Available
ICS4
ICS
EPP III
LPH
EPC
CC
ICS 4 - Intelligent
Control System
ICS - Intelligent
Control System
EPP III - Electronic
Proportional
With the added functionality of a colour TFT
screen, with larger viewing area, upgraded
menus and fault diagnostics, along with
arm mower speed adjustment system,
the finger tip proportional joystick gives
smooth and agile control to the operator.
The ever popular choice for the operator.
With the proportional joystick, fingertip
control and simplicity to mount in tractor.
This is the contractors first choice.
Now in its 3rd generation, it shares the
robust control box housing of the ICS
controls. The ultimate in electronic controls,
fitting well on all models in the range. It is a
firm favourite with farmers and contractors.
Compatible with
Microklippa
Wren
Robin
Raven
Osprey
Choosing the
right Controls
Kestrel Evo ‘E’
Kestrel Evo ‘S’
Kestrel Evo ‘S’ Forward
Kestrel Evo ‘S’ Front Mounted
Points to consider when choosing
the right control include:
Hawk Evo
Hawk Evo Forward
• Budget – cost of control
upgrade
Hawk Evo VFA
Falcon Evo
Falcon Evo Forward
Falcon Evo VFA
Front Mount Range
Buzzard Evo
Buzzard Evo Forward
Want to know more about our Controls?
B71 & B80M
Scan the QR code to the left with a smart device and app to view the page.
Alternatively visit: www.bomford-turner.com/landscape/fittings-and-controls/controls
B81.81
Eagle
LPH - Low Pressure
Hydraulics
EPC - Electronic
Proportional
CC - Low Friction
Cable Controls
A robust proportional alternative. With a
larger control joystick, it is well suited to
machines with multiple occasional users, or
for someone upgrading to their first joystick
control. Simple operation, and easy to use.
A proportional control option for the
smaller compact range. Professional
operation with fingertip controls, but in a
compact sized housing, making mounting
to smaller compact tractors simpler.
The original remote cable control. Using
a series of low friction cable controls in
conjunction with a remote hydraulic valve.
A simple lever arrangement gives individual
control of each hydraulic ram cylinder.
• Ease of use over long
periods of time
• Mounting positions in cab
For further information
please speak to one of our
experienced team.
100
Service
& Support
Should you require any assistance with
operation or repair our service and support
team are on hand to help.
Technology experts
Bomford service engineers are experts in our technology. Backed by
extensive training and a fully-equipped mobile workshop, they provide
an unrivalled level of product knowledge and back-up, to deliver fast
and effective cover across the country.
World class sales support
We can offer specialist advice direct from the manufacturer,
one-to-one consultations with experienced sales professionals
and expert guidance on creating new machines to precise
personal specifications.
101
103
102
Contact Us
Director
UK Sales
Export Sales
Parts
James Cuthbertson
Debbie Winters
Craig Whiting
Sam Sharp
Sales Administration Manager
Export Sales Manager
Parts Sales Manager
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 773238
Email: dwinters@bomford-turner.com
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 773238
Mobile: +44 (0)7813 137451
Email: cwhiting@bomford-turner.com
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 490123
Mobile: +44 (0)7725 163728
Email: ssharp@bomford-turner.com
Jim Goddard
Ron Amphlett
International Business Development Manager
(North America)
Parts Supervisor
Director of Sales & Marketing
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 773238
Mobile: +44 (0)7768 553799
Email: jcuthbertson@bomford-turner.com
Head Office
Susie Beauclair
Sales & Marketing Secretary
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 773238
Email: sbeauclair@bomford-turner.com
Graham Cooper
Area Sales Manager - South & East
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 773238
Mobile: +44 (0)7768 553800
Email: gcooper@bomford-turner.com
Ashley Anson
Area Sales Manager - Central North & Scotland
Conditions of sale
Prices and specification are subject to change without notice. All
goods will be invoiced at price ruling at the date of dispatch. Prices
quoted in the price list do not include VAT.
The buyer will bring to the attention of those who use the goods
all instructions provided by the seller on their use (including all
safety precautions to be taken) and will ensure that they have the
necessary skills and understanding in respect of their use. Save the
extent otherwise provided in section 2 of the unfair contract terms
act; the buyer will protect the seller against any failure by the buyer
to carry out this obligation.
While every effort has been made to ensure the accuracy of the
information at the time of printing, Bomford Turner accepts no
liability due to any errors or omissions present in this literature.
Bomford Turner reserves the right to make any changes to product
specification outside any of those listed in this price list.
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 773238
Mobile: +44 (0)7774 855580
Email: aanson@bomford-turner.com
Rhys Thomas
Area Sales Manager - Midlands, Wales & Southwest
Flailbot Specialist
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 773238
Mobile: +44 (0)7817 137068
Email: rthomas@bomford-turner.com
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 773238
Mobile: +44 (0)7814 163066
Email: jgoddard@bomford-turner.com
Ole Buhl
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 490123
Email: ramphlett@bomford-turner.com
Service
Northern Europe Sales Manager
Mark Cresswell
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 773238
Mobile: +45 40 35 89 71
Email: obuhl@bomford-turner.com
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 490123
Email: mcresswell@bomford-turner.com
Ben Thould
Service Manager
Richard Stanley
Export Sales Administration
Field Service Technician
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 490123
Email: bthould@bomford-turner.com
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 490123
Mobile: +44 (0)7813 137457
Email: rstanley@bomford-turner.com
Amanda Cox
Export Sales Administration
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 773238
Email: acox@bomford-turner.com
Gavin Stockley
Service Engineer
Office Tel: +44 (0)1789 773383
Office Fax: +44 (0)1789 490123
Mobile: +44 (0)7815 123165
Email: gstockley@bomford-turner.com
Bomford Turner Limited
Station Road, Salford Priors,
Nr. Evesham, Worcestershire
WR11 8SW
United Kingdom
Bomford
is a member of
Tel +44 (0) 1789 773383
Fax +44 (0) 1789 773238
E-mail info@bomford-turner.com
Website www.bomford-turner.com
Main Product Catalogue
2018 EN - Issue 1
Download PDF
Similar pages