OWNERS MANUAL BUILT-IN WELL MODULAR

011C
WELLS BLOOMFIELD, LLC
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomfield.com
OWNERS MANUAL
BUILT-IN WELL
MODULAR
WARMERS
with
INFINITE,
THERMOSTAT or DIGITAL
CONTROLS
MODELS
MOD-200T
M200, M227, MOD200, MOD227
M300, M327, MOD300, MOD327
M400, M427, MOD400, MOD427
M500, M527, MOD500, MOD527
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
MOD-200TDN
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
p/n 2M-Z16298
Rev. (-)
M011C.02
120816
LIMITED WARRANTY STATEMENT
Unless otherwise specified, all commercial cooking
equipment manufactured by WELLS BLOOMFIELD, LLC is
warranted against defects in materials and workmanship
for a period of one year from the date of original installation
or 18 months from the date of shipment from our factory,
whichever comes first, and is for the benefit of the original
purchaser only.
The prices charged by Wells Bloomfield for its products
are based upon the limitations in this warranty. Seller’s
obligation under this warranty is limited to the repair of
defects without charge by a Wells Bloomfield factory
authorized service agency or one of its sub-service
agencies. This service will be provided on customer’s
premises for non-portable models. Portable models (a
device with a cord and plug) must be taken or shipped
to the closest authorized service agency, transportation
charges prepaid, for service. In addition to restrictions
contained in this warranty, specific limitations are shown in
the Service Policy and Procedure Guide. Wells Bloomfield
authorized service agencies are located in principal cities.
This warranty is valid in the United States and Canada and
void elsewhere. Please consult your classified telephone
directory, your foodservice equipment dealer or contact:
Wells Bloomfield, LLC
10 Sunnen Dr., P.O.Box 430129 St. Louis MO 63143 USA
phone (636) 678-6314 or fax (314) 781-2714
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW
OR IN FACT, INCLUDING BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE, AND/OR FOR
DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH WELLS BLOOMFIELD PRODUCTS.
This warranty is void if it is determined that, upon inspection
by an authorized service agency, the equipment has been
modified, misused, misapplied, improperly installed, or
damaged in transit or by fire, flood or act of God. It also
does not apply if the serial nameplate has been removed,
or if service is performed by unauthorized personnel.
for information and other details concerning warranty.
1.
2.
3.
4.
5.
6.
Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
All problems due to operation at voltages or phase
other than specified on equipment nameplates are
not covered by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility.
All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
Damage to electrical cords and/or plug due to exposure
to excessive heat are not covered by this warranty.
Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility. Those
miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to sixty (60) miles from an
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted for
ninety (90) days from date of purchase on non-warranty
equipment. This parts warranty is limited only to
replacement of the defective part(s). Any use of nongenuine Wells parts completely voids any warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus not covered by this
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability to
perform service are not covered by warranty. This
includes institutional and correctional facilities.
SHIPPING DAMAGE CLAIM PROCEDURE
NOTE: For your protection, please note that equipment
in this shipment was carefully inspected and packaged
by skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
3.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and file
“CONCEALED DAMAGE” claim with them. This
should be done within fifteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells Bloomfield cannot assume liability for damage or loss
incurred in transit. We will, however, at your request, supply
you with the necessary documents to support your claim.
xi
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
TABLE OF CONTENTS
WARRANTY
SPECIFICATIONS
FEATURES & OPERATING CONTROLS
PRECAUTIONS & GENERAL INFORMATION
AGENCY LISTING INFORMATION
INSTALLATION
OPERATION
CLEANING INSTRUCTIONS
TROUBLESHOOTING SUGGESTIONS
MAINTENANCE INSTRUCTIONS
MODEL NUMBER IDENTIFICATIONS
EXPLODED VIEW & PARTS LIST
WIRING DIAGRAM
PARTS & SERVICE
CUSTOMER SERVICE DATA
xi
1-3
4
5
5
6
8
10
12
13
14
15 - 25
26 - 35
36
37
INTRODUCTION
Thank You for purchasing this Wells Bloomfield appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it
gives you the very best performance and a long, economical service life.
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
This manual contains the information needed to properly install this appliance, and to use and care for the
appliance in a manner which will ensure its optimum performance.
SPECIFICATIONS (Infinite)
MODEL
MOD200, D, DM
MOD300, D, DM
MOD400, D, DM
MOD500, D, DM
VOLTS
WATTS
208V
240V
208V
240V
208V
240V
208V
240V
AMPS 3ø
AMPS1ø
L1
L2
L3
1800W
2400W
-
-
-
8.7A
10.0A
2700W
3600W
3600W
4800W
4500W
6000W
7.5A
8.7A
11.2A
13.0A
15.0A
17.0A
7.5A
8.7A
11.2A
13.0A
11.2A
13.0A
7.5A
8.7A
7.5A
8.7A
11.2A
13.0A
13.0A
15.0A
17.3A
20.0A
21.6A
25.0A
1
SPECIFICATIONS (Thermostat)
MOD-200T
MOD-200TD
MOD-200TDM
MOD-200TN
MOD-200TDN
MOD-200TDMN
MOD-227TD
MOD-227TDM
MOD-300T
MOD-300TD
MOD-300TDM
MOD-300TN
MOD-300TDN
MOD-300TDMN
MOD-327TDM
MOD-400T
MOD-400TD
MOD-400TDM
MOD-427TDM
MOD200TDM/AF
MOD200TDMN/AF
MOD227TDM/AF
MOD300TDM/AF
MOD300TDMN/AF
MOD327TDM/AF
MOD400TDM/AF
MOD427TDM/AF
MOD500TDM/AF
MOD527TDM/AF
VOLTS
WATTS
208 VAC
AMPS 3ø
AMPS1ø
L1
L2
L3
2480W
6.0A
6.0A
10.3A
11.9A
240 VAC
3300W
6.9A
6.9A
11.9A
13.8A
208 VAC
2480W
6.0A
6.0A
10.3A
11.9A
240 VAC
208 VAC
240 VAC
3300W
2480W
3300W
6.9A
6.0A
6.9A
6.9A
6.0A
6.9A
11.9A
10.3A
11.9A
13.8A
11.9A
13.8A
208 VAC
3725W
10.3A
10.3A
10.3A
17.9A
240 VAC
4950W
11.9A
11.9A
11.9A
20.6A
208 VAC
3725W
10.3A
10.3A
10.3A
17.9A
240 VAC
208 VAC
240 VAC
4950W
3725W
4950W
11.9A
10.3A
11.9A
11.9A
10.3A
11.9A
11.9A
10.3A
11.9A
20.6A
17.9A
20.6A
208 VAC
4960W
14.5A
14.5A
9.8A
23.8A
240 VAC
208 VAC
240 VAC
6600W
4960W
6600W
17.8A
14.5A
17.8A
17.8A
14.5A
17.8A
11.3A
9.8A
11.3A
27.5A
23.8A
27.5A
208 VAC
240 VAC
208 VAC
240 VAC
208 VAC
240 VAC
2480W
3300W
2480W
3300W
2480W
3300W
6.0A
6.9A
6.0A
6.9A
6.0A
6.9A
6.0A
6.9A
6.0A
6.9A
6.0A
6.9A
10.3A
11.9A
10.3A
11.9A
10.3A
11.9A
11.9A
13.8A
11.9A
13.8A
11.9A
13.8A
208 VAC
240 VAC
208 VAC
240 VAC
208 VAC
240 VAC
3725W
4950W
3725W
4950W
3725W
4950W
10.3A
11.9A
10.3A
11.9A
10.3A
11.9A
10.3A
11.9A
10.3A
11.9A
10.3A
11.9A
10.3A
11.9A
10.3A
11.9A
10.3A
11.9A
17.9A
20.6A
17.9A
20.6A
17.9A
20.6A
208 VAC
240 VAC
208 VAC
240 VAC
4960W
6600W
4960W
6600W
14.5A
17.8A
14.5A
17.8A
14.5A
17.8A
14.5A
17.8A
9.8A
11.3A
9.8A
11.3A
23.8A
27.5A
23.8A
27.5A
208 VAC
240 VAC
208 VAC
240 VAC
6200W
8250W
6200W
8250W
19.5A
22.1A
19.5A
22.1A
14.6A
16.9A
14.6A
16.9A
14.6A
16.9A
14.6A
16.9A
29.8A
34.4A
29.8A
34.4A
2
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
MODEL
SPECIFICATIONS (Digital)
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
MODEL
M200CE
M200E
M200CED
M200ED
M200CED6
M200ED6
M200CEDM
M200EDM
M200CEDM6
M200EDM6
M200CEAF
M200EAF
M200CEAF6
M200EAF6
M227CEDM
M227EDM
M227CEDM6
M227EDM6
M227CEAF
M227EAF
M227CEAF6
M227EAF6
M300E
M300E6
M300EAF
M300EAF6
M300ED
M300ED6
M300EDM
M300EDM6
M327EAF
M327EAF6
M327EDM
M327EDM6
M300EAFTH
M400E
M400E6
M400EAF
M400EAF6
M400ED
M400ED6
M400EDM
M400EDM6
M427EAF
M427EDM
M427EDM6
M500E
M500E6
M500EAF
M500EAF6
M500ED
M500ED6
M500EDM
M500EDM6
M527EAF
M527EAF6
M527EDM
M527EDM6
VOLTS
AMPS 3ø
WATTS
AMPS1ø
L1
L2
L3
6.0 / 6.9
6.0 / 6.9
10.3 / 11.9
11.9 / 13.8
10.3 / 11.9
17.9 / 20.6
7.5 / 8.7
13 / 15
208/240V
2,475 / 3,312
208/240V
3, 733 / 4,944
208/240V
2,704 / 3,600
208/240V
4,950 / 6,600
14.5 / 17.8 14.5 / 17.8
9.8 / 11.3
23.8 / 27.5
208 / 240V
6,198 / 8,256
19.5 / 22.1 19.5 / 22.1
19.5 / 22.1
29.8 / 34.4
3
10.3 / 11.9 10.3 / 11.9
7.5 / 8.7
7.5 / 8.7
FEATURES & OPERATING CONTROLS
TEMPERATURE
CONTROL
KNOB
IL2468
IMPORTANT:
DO NOT LEAVE ON
“PREHEAT”
Unit may cycle on hi-limit
control, leading to premature
failure of the hi-limit controls
device.
WELLSLOKS
IL2469
WATER LEVEL
SENSOR
A. INFINITE SWITCH
1. On INFINITE SWITCH CONTROLLED warmers, power is applied to
the heating element based on the control knob position, which varies
the duty cycle of the heating element.
2. The desired temperature is controlled by rotating the TEMPERATURE
CONTROL KNOB. The knob may have a numeric scale, where
higher numbers correspond to higher temperature. LO is the lowest
temperature setting; PREHEAT is a “continuous on” setting. Infinite
switch controlled warmers are equipped with a hi-limit device to prevent
overheating. The hi-limit will self-reset after the warmer has cooled.
3. On warmers equipped with an INDICATOR LIGHT, the light will glow
when the infinite switch is in any position other than OFF.
4. The TEMPERATURE CONTROL KNOB will rotate without stopping,
with PREHEAT and OFF having obvious detents.The OFF position is a
“positive” OFF (i.e. the switch is positively held in the open position).
NOTE: An infinite switch controls temperature by varying the ratio of “on”
time to “off” time. Thus, no temperature sensing devise is required.
B. MOUNTING
1. MOD-series built-in warmers may are equipped with wellsloks, uniquely
designed turnout tabs which help secure the warmer top flange to the
countertop.
2. See the Installation Instructions, supplied with the particular appliance.
EL
V
LE
ER
T
WA
IL2524
C. DRAINS
1. Models wih a “D” (e.g. M200TD) have drains for each pan, with each
pan having an individual drain valve.
2. Models with a “DM” units (e.g. M200TDM) have the individual drain lines
manifolded together, with a single drain valve for the entire manifold.
D. AUTOFILL
1. On AUTOFILL units, water level is automatically fed into the
“master” pan whenever that pan’s thermostat is ON .
2. Water level is sensed by a WATER LEVEL PROBE in the “master” pan.
4
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
INDICATOR
LIGHT
A. THERMOSTAT
1. On thermostatically controlled warmers, power is applied to the
heating element according to the control knob position and the actual
temperature at the temperature sensing thermobulb.
2. The desired temperature is controlled by rotating the temperature
control knob. The knob has a numeric scale, where higher numbers
correspond to higher temperature.
3. On warmers equipped with an indicator light, the light will glow when
the thermostat is calling for heat (i.e. the element is energized).
4. The TEMPERATURE CONTROL KNOB will rotate approximately 300º,
and will reach a “stop” at both ends.
The OFF position is marked.
NOTE: The dial position is an indication of the temperature setting. Actual
temperature will vary depending upon the type of product and food
consistency.
PRECAUTIONS AND GENERAL INFORMATION
This appliance is intended for use in commercial establishments only.
WARNING:
WA
This appliance is intended to hold pre-heated food for human
consumption. No other use is recommended or authorized by the
manufacturer or its agents.
SHOCK HAZARD
SHO
Operators of this appliance must be familiar with the appliance use,
limitations and associated restrictions. Operating instructions must be
read and understood by all persons using or installing this appliance.
Cleanliness of this appliance is essential to good sanitation. Read and
follow all included cleaning instructions and schedules to ensure the
safety of the food product.
Disconnect this appliance from electrical power before performing any
maintenance or servicing.
This appliance is not jet stream approved. Do not direct water jet
or steam jet at this appliance, or at any control panel or wiring. Do
not splash or pour water on, in or over any controls, control panel or
wiring.
Exposed surfaces of this appliance can be hot to the touch and may
cause burns.
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
Do not operate this appliance if the control panel is damaged. Call
your Authorized Wells Service Agent for service.
The technical content of this manual, including any wiring diagrams,
schematics, parts breakdown illustrations and/or adjustment
procedures, is intended for use by qualified technical personnel.
Any procedure which requires the use of tools must be performed by a
qualified technician.
This manual is considered to be a permanent part of the appliance.
This manual and all supplied instructions, diagrams, schematics,
parts breakdown illustrations, notices and labels must remain with the
appliance if it is sold or moved to another location.
This appliance is made in the USA. Unless otherwise noted, this
appliance has American sizes on all hardware.
All servicin
servicing requiring
access to non-insulated
electrical components must
be performed by a factory
authorized technician.
DO NOT open any access
panel which requires the use
of tools. Failure to follow this
warning can result in severe
electrical shock.
CAUTION:
CA
RIS OF
RISK
DAMAGE
DAM
DO NOT connect or energize
this appliance until all
installation instructions are
read and followed. Damage
to the appliance may result
if these instructions are not
followed.
CAUTION:
CA
HOT SURFACE
H
Exposed surfaces
su
can be hot
to the touch and may cause
burns.
AGENCY LISTING INFORMATION
Refer to the product nameplate for the specific appliance for agency
listings. In general:
STD 4
This appliance conforms to NSF Standard 4 for sanitation only if
installed in accordance with the supplied Installation Instructions.
UL Listed warmers are U Listed under UL File E6070.
E6070
UL Listed Warmers
5
INSTALLATION
WARNING:
WA
RISK OF INJURY
RIS
Installation procedures must
be performed by a qualified
technician with full knowledge
of all applicable electrical and
plumbing codes. Failure can
result in personal injury and
property damage.
CAUTION
CA
FIRE HAZARD
Avoid storin
storing flammable or
combustible materials in, on or
near the appliance.
IMPORTANT: For warmers
installed in plastic counter
tops, the counter material
must be protected from the
heat of the warmer in order to
prevent discoloration and/or
deterioration. Wellsloks are
not suitable for this purpose.
The installer should contact
the manufacturer or distributor
of the countertop material for
specific instructions.
IMPORTANT: Wellslok
Extension Kits must be
used ONLY with UL Listed
warmers approved for
installation in wood counter
tops. Refer to the Installation
Instructions provided with the
warmer.
UNPACKING & INSPECTION
Carefully remove the appliance from the carton. Remove all protective
plastic film, packing materials and accessories from the Appliance
before connecting electrical power or otherwise performing any
installation procedure.
Carefully read all instructions in this manual and the Installation
Instruction Sheet packed with the appliance before starting any
installation.
Read and understand all labels and diagrams attached to the
appliance.
Carefully account for all components and accessories before discarding
packing materials. Store all accessories in a convenient place for later
use.
INSTALLATION NOTES
1. Installation and start up of built-in warmers MUST be performed
by an authorized installation company.
2. It is the responsibility of the installer to verify that this warmer
installation is in compliance with the specifications listed in this
manual and on the specification sheet provided.
3. It is the RESPONSIBILITY OF THE INSTALLER to check with
the authority having jurisdiction, in order to verify that this warmer
installation is in compliance with local code requirements.
4. Water supply and drain installation must meet all applicable
local, state and federal plumbing codes and ordinances.
5. Refer to Installation Instructions included with the warmer for
Underwriters Laboratories conditions of acceptability, electrical
requirements and other installation concerns.
BUILT-IN WARMERS
1. This is a GENERAL GUIDE. For specific cutout dimensions
and other installation details, refer to the Installation
Instructions supplied with the warmer.
2. Cutout dimensions for warmer units and control panels are
listed on the Installation Instructions provided with the warmer.
NOTE: Cutout dimensions are different for auto-fill and non auto-fill
units, control panels, and for wood and metal counters. Verify the
dimensions are correct for the installation before making the cutout.
Specific cutout specifications are list on the installation sheet included
with the unit.
6
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
NOTE: DO NOT discard
the carton or other packing
materials until you have
inspected the appliance for
hidden damage and tested it
for proper operation. Refer to
SHIPPING DAMAGE CLAIM
PROCEDURE on the inside
front cover of this manual.
INSTALLATION
3. For “top-mounted” warmers (i.e. warmers mounted from above the
counter top):
a.
Verify that provided sealants are applied to the underside of the
warmer top flange prior to setting the unit into the cutout.
b.
After installation, verify that the tabs on the Wellsloks are turned
out to lock the warmer into the counter.
c.
Apply a thin bead of food-grade silicone sealant around the flange
to seal it to the counter.
d.
Wellslok extension kits are available for installing warmers in
counter tops where the standard Wellslok would not normally
reach. The extension kit will adapt to counter tops up to 1¾” thick.
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
ELECTRICAL INSTALLATION
1.
Refer to the product nameplate. Verify the electrical service
power. Voltage and phase must match the nameplate
specifications. Wiring the warmer to the wrong voltage can
severely damage the unit or cause noticeably decreased
performance.
2.
Available electrical service amperage must meet or exceed the
specifications listed on the specification sheet provided with the
warmer.
3.
Warmer and control unit must be connected to an appropriate
building ground. Ground connection will be marked “GND” or
”
“.
NOTE: Wire gauge, insulation type and temperature rating , as
well as type, size and construction of conduit, must meet or exceed
applicable specifications of local codes and of the National
Electrical Code.
PLUMBING INSTALLATION
For use in the State of Massachusetts, this appliance must be
installed in compliance with Massachusetts Fuel Gas and
Plumbing Code CMR 248.
1.
IMPORTANT: All plumbing installations must be performed by
a qualified plumber.
2.
For units equipped with a DRAIN LINE: Some jurisdictions
may require an approved air gap or other back-flow
prevention device in the drain. It is the responsibility of the
plumber to determine such requirement, to provide and
properly install the required device.
3.
AUTOFILL units are equipped with a DRAIN LINE: Some
jurisdictions may require an approved air gap or other backflow prevention device in the drain. It is the responsibility of the
plumber to determine such requirement, to provide and properly
install the required device.
4.
For AUTOFILL units: Some jurisdictions may require an
approved back-flow preventer in the water supply line. It is the
responsibility of the plumber to determine such requirement, and
to provide and properly install the required device.
Autofill supply must be connected to a COLD WATER line only.
7
NOTE: Damage caused
by leaks due to improper
installation is NOT covered by
warranty.
CAUTION:
CA
SHOCK HAZARD
SHO
The ground lug of this
appliance must be connected
to a suitable building ground.
IMPORTANT: Contact a
licensed electrician to install
and connect electrical power
to the appliance.
IMPORTANT: Damage due to
being connected to the wrong
voltage or phase is NOT
covered by warranty.
IMPORTANT: Electrical
installation other than as
specified on the specification
sheet will void the UL listing,
and may void the warranty.
NOTE: Plumb connections
must be made in compliance
with all Federal, State and
Local Plumbing Codes and
Ordinances.
OPERATION
HOT SURFACE
H
Exposed su
surfaces can be hot
to the touch and may cause
burns.
CAUTION:
CA
SHOCK HAZARD
SHO
DO NOT splash or pour water
onto control panel or wiring.
Always use an inset.
DO NOT place food directly
into the warmer.
Always pour hot water into the
warmer before it is preheated.
DO NOT pour water into a
dry, heated warmer. This may
damage the unit.
DO NOT put ice into a
warmer pan. This will cause
condensation on the inside of
the warmer. Damage caused
by condensation is NOT
covered by warranty.
Stir thick food items frequently
to keep food heated uniformly.
Keep insets covered to
maintain food quality and
temperature.
DO NOT use AUTOFILL
warmers in the dry mode.
This may damage the water
level sensor. NEVER turn the
thermostat ON for the pan
with the sensor and fill tube
unless the entire warmer unit
is to be used in the wet mode.
WATER LEVEL
SENSOR
EL
V
LE
ER
T
WA
WET OR DRY OPERATION for WARMERS
1. Carefully read the description of the warmer operation on the
specification sheet.
2. a. Most warmers are designed for WET OR DRY operation.
b. Warmers may be used wet, or may be used dry. However
warmers may NOT be used wet-to-dry or dry-to-wet unless
they have been allowed to cool to room temperature between the
change in wet or dry operation.
c. Wells Manufacturing recommends operating WET for consistent
food heating.
d. If your wet-operation warmer is allowed to run dry, turn it
OFF and allow to cool to room temperature before adding water.
3. If the warmer is to be used for WET operation, add approximately 1” of
hot tap water before turning the warmer on. Use of hot water will allow
a faster preheat.
a. Check the water level frequently and add hot water as necessary
to prevent the warmer from running dry. Do not add water to the
warmer if it has run dry.
b. If your wet-operation warmer is allowed to run dry, turn it OFF and
allow to cool to room temperature before adding water.
4. Damage caused by allowing a wet-operation warmer to run dry,
is NOT covered by warranty. Damage caused by adding water
to a dry warmer when hot is NOT covered by warranty.
PRE-HEATING THE WARMER
1. Place desired pan(s) or inset(s) with appropriate adapter top on warmer.
a. Insets are available as accessories in 2½ qt., 4qt., 7 qt., and 11 qt.
sizes with lids and adapter tops.
b. For dry operation, a 6” deep pan or inset is recommended.
2. Turn temperature control to HI or highest temperature setting.
3. Allow warmer to preheat for approximately 30 minutes, then set
the control for the desired temperature. Be sure to keep the warmer
covered during preheat and operation.
AUTOFILL WARMERS
1. Autofill warmers sense water level by a sensor placed at the proper
level. For manifolded autofill warmers, the water level sensor / fill tube
is in one pan only, normally in the far left pan.
2. Water fills the pan through an inlet tube. For manifolded autofill
warmers, the fill tube is normally in the far left pan. All other sections fill
at the same time through the drain manifold.
3. The autofill function is active only when the thermostat for the pan with
the water level sensor is turned ON .
4. Make sure the drain valve is fully closed before turning any t-stats ON.
5. The autofill function is only activated when the far left thermostat is
turned ON. For manifolded autofill warmers, be sure to turn far left
thermostats ON before turning any other control ON, to avoid heating a
dry pan.
IL2524
8
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
CAUTION:
CA
OPERATION (continued)
AUTOFILL WARMERS continued
6. DO NOT use autofill warmers in the dry mode. This may damage the water
level sensor probe. NEVER turn the thermostat ON for the pan with the
probe and fill tube unless the entire warmer unit is to be used in the wet
mode.
7. Clean water level sensor daily to maintain water level in warmer.
OPERATION
1. Always use an inset. DO NOT place food directly into the warmer.
2. Check water level in wet-operation warmer frequently during use. Running
warmers dry will lower the temperature of the food in the insert pan, and may
damage the warmer.
3. Alternating between wet and dry operation in any individual
warmer is NOT recommended.
4. DO NOT use metal tools, steel wool, or caustic or abrasive
cleanser to clean warmer pan.
WARMERS WITH MANIFOLDED DRAIN
1. Manifolded warmers have a single drain valve.
2. Water poured into any one section will seek the same water level with all
sections on the manifold.
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
3.
Make sure the drain valve is fully closed before filling warmer.
Digital Control Operation
This control will provide close regulation of the temperature in the basin and
give an indication of the air temperature surrounding the food container. The
temperature is adjustable from 100°to 200°F. Pressing the ON/OFF button of
the temperature control activates the heating circuit. The setpoint is displayed
by pressing and holding the TEMP button. Adjust the regulated temperature
by pressing the + or – buttons while holding the TEMP button down. The
actual basin temperature is displayed when no buttons are pressed and the
control is in the ON mode. The dot in the lower corner of the display indicates
when the control is calling for heat.
When provided the master power switch controls the heating circuit and the
automatic water fill ocntrol. Turn “OFF” the power switch when draining or
cleaning the unit.
On/Off
Button
Temp
Display
Up
Down
Temp
ABOVE: Digital Electronic Control Panel (certain models only)
9
Power
Switch
IL2525
CLEANING INSTRUCTIONS
CAUTION:
CA
SHO
SHOCK HAZARD
DO NOT splash
spl
or pour water
into or over any control panel
or wiring.
CAUTION:
CA
SHOCK HAZARD
SH
DAILY CLEANING INSTRUCTIONS
PREPARATIONS: Turn control knob(s) to OFF. Allow warmer to cool
before proceeding.
Remove any insets, pans and/or adapter tops.
Drain or remove water from well if used for
wet operation.
FREQUENCY:
Minimum - daily.
TOOLS:
Mild Detergent
Solution: 10 Parts Warm Water to 4 Parts Vinegar
Plastic Scouring Pad
Clean Cloth or Sponge
Food-Grade Silicone Sealant
Disconnect warmer from
electric power before cleaning
CAUTION:
CA
Allow warmer
warm to cool
completely before cleaning.
1. Wipe entire unit down using a clean cloth or sponge and mild
detergent.
2.
Use a plastic scouring pad to remove any hardened food particles
or mineral deposits.
IMPORTANT: DO NOT use steel wool for cleaning.
3.
Rinse warmer thoroughly with a vinegar and water solution to
neutralize all detergent cleanser residue.
4.
Inspect warmer flange-to-counter seal. Reseal with food-grade
silicone sealant if necessary. Failure to do so may allow grease and
water to leak into insulation and heating element, causing a potential
fire and/or electric shock hazard.
5.
Inspect warmer tank for damage. Damage to the outer body may
allow grease and water to leak into insulation and heating element,
causing a potential fire and/or electric shock hazard. Contact your
Authorized Wells Service Agency to inspect warmer if water or grease
contamination is suspected.
6.
Close drain valve. Add proper amount of warm water. Turn control
knob(s) ON and check for proper operation.
10
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
BURN HAZARD
BU
CLEANING INSTRUCTIONS
WEEKLY CLEANING INSTRUCTIONS
CAUTION:
CA
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
PREPARATIONS: Remove any insets, pans and/or adapter tops.
Drain or remove water from well if used for wet
operation.
FREQUENCY:
Weekly, or whenever lime or scale is seen
accumulating on the sides of the warmer pans.
TOOLS:
Commercial Delime Cleaner
Plastic Scouring Pad
Clean Cloth or Sponge
1.
Add water to pans until water is at normal operating level
(1” - 1 1/2” deep) or covers accumulated scale.
2.
Heat water to maximum temperature (190ºF or higher).
3.
Pour contents of one package of commercial delime cleaner
into each warmer pan. Stir to dissolve cleaner. Turn heat
control OFF. Cover pans.
4.
Allow solution to soak at least one hour, or overnight for heavy
scale buildup.
5.
Drain hot water from pans. Scrub with a plastic scouring pad.
Rinse thoroughly with hot water, then dry.
6.
Refill pans with hot tap water and resume operation.
7.
Heavy scale buildup may require additional treatments.
11
CH
CHEMICAL
BURN
HAZARD
HA
chemicals may be
Deilimng che
caustic. Wear appropriate
personal protective equipment.
Follow cleaner manufacturer’s
instructions for safest use.
TROUBLESHOOTING SUGGESTIONS
POSSIBLE CAUSE
SUGGESTED REMEDY
Circuit breaker off or tripped
Reset circuit breaker
Warmer will not heat
Temperature control not set
Set control to desired temperature
Wet insulation
Verify flange-to counter seal is sound, or
reseal with food-grade silicone sealant
Pan leaking or other internal damage
Contact your Authorized Wells Service Agency
for repairs
Internal damage
Contact your Authorized Wells Service Agency
for repairs
Mineral deposits on pan acting as a
insulator
Clean pan(s) with delime cleaner
Wired to wrong voltage
Verify supply voltage - must match voltage on
warmer nameplate
Drain valve not fully closed
Check drain valve for debris and close fully
Drain valve damaged or pan(s) leaking
Contact your Authorized Wells Service Agency
for repairs
Water level sensor dirty
Clean water level sensor
Internal damage
Contact your Authorized Wells Service Agency
for repairs
Water supply turned off or restricted
Be sure water supply is turned on and water
supply hose is not pinched or twisted
Bad Probe or other Internal Damage
Contact your Authorized Wells Service Agency
for repairs
Blocked drain manifold
Clean drain manifold
Warmer trips circuit breaker
Warmer slow to heat
Drain-equipped unit will not hold
water
Auto-fill unit overflows
Auto-fill unit does not fill
One or more pans of an auto-fill
unit do not fill
There are no user-serviceable components in this appliance.
In all instances of damage or malfunction, contact your Authorized Wells Service Agency for repairs.
12
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
SYMPTOM
No power to warmer
MAINTENANCE INSTRUCTIONS
CARE OF STAINLESS STEEL
Stainless steel is a marvelous material: strong, lustrous and low maintenance. With
a minimum of care, it will normally retain its beauty and durability for the life of the
equipment. In some applications, however, special care is required in order to maintain
stainless steel’s special properties.
External components, such as cabinets and control panels, are finished with a grain
pattern. This pleasing finish is best maintained by cleaning with a non-abrasive
cleanser applied with a soft cloth. Rub only in the direction of the grain. In the absence
of visible grain, rub only along the longest axis of the appliance.
Restore stainless steel’s luster by applying a polish specifically made for stainless steel.
Spray on, wipe off with a soft cloth, rubbing in the direction of the grain.
Never use metal implements, wire brushes, abrasive scratch pads or steel wool to
clean stainless steel.
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
Warmer pans, insets and other vessels are subject to a harsher environment. Wells
Manufacturing uses an very high quality stainless steel (#304DDQ) for our food warmer
pans. Even the highest quality stainless steel, however, is mostly iron, and will rust, pit
and corrode under the following conditions:
•
•
Poor Water Quality: Hard water (water with a high content of dissolved minerals)
will leave mineral deposits when allowed to dry. Calcium (lime) can buildup on
heated surfaces, even under water. If left unattended, hard water spots and lime
buildup can lead to rusting, corrosion and pitting.
Contact with Chlorides: Chlorides (specific compounds of chlorine) are found in
food, table salt and many cleansers. Chlorides can attack the surface of stainless
steel, resulting in corrosion and pitting.
Keep your stainless steel warmers clean and free from calcium buildup.
Use alkaline, alkaline chlorinated or non-chloride cleanser.
Use citric acid-based cleaners to remove calcium deposits.
For additional information, please read the NAFEM Stainless Steel Equipment and
Cleaning Guide. Contact NAFEM at :
North American Association of Food Equipment Manufacturers
401 N. Michigan Avenue
Chicago, Illinois 60611-4267
(312) 644-6610
13
MODEL NUMBER IDENTIFIER
MOD200T, MOD200TD, MOD200TDM
Built-In Modular Warmer Identifier
M300CTDNMAF6
96” Capillary Tube
Auto-Fill
Manifold
Narrow
Drain
T=Thermostat, E=Digital
Niether = Infinite
Corded
00= 20” Pan, 27=27” Pan
Number of Pans
M or MOD, same
Standard
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
Narrow
Drain
Auto-Fill
Manifold
Pan Assyw/
Auto-Fill Connection
Auto-Fill
Sensor Assy
IL2527
14
EXPLODED VIEW & PARTS LIST
36
32
1
35
31
33
3
34
6
“T”units only
7
2
8
3
9
4
10
5
30
29
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
16
25
24
11
17
12
13
15
14
25
24
23
22
27
21
28
18
26
20
10
19
See Detail A
Digital Controlled Units
= AutoFill Units Only
SK2615,
BUILT-IN MODULAR WARMERS
15
Rev. -,
8/15/12
PARTS LIST: M200-227 SERIES
Model: Modular Warmers M200-227T, TD, TDM, TDMAF, TN, M200-227E, CE, ED, EDM, EDMAF, EN
1
2
3
Part No
Description
Qty
SCREEN DRAIN ASSY WARMER
P2-Z14636
PAN ASSY 12X20 EAF W/TEE
P2-Z14647
PAN ASSY 12X27 EAF
P2-WL0064
PAN ASSY W/ELBOW MODTDMN
WS-503893
PAN ASSY 200-500TDM A/F
M200 T-STAT & INFINITE
WS-504101
PAN ASSY 12X27 AF
M227 T-STAT
P2-Z14639
PAN ASSY 12X20 E
M200 DIGITAL
P2-Z14637
PAN ASSY 12X20 ED w/DRAIN
P2-Z14638
PAN ASSY 12X20 EDM
P2-Z14646
PAN ASSY 12X27 EDM
P2-WL0063
PAN ASSY AF MODTDMN
WS-55741
PAN W/O DRAIN 200-500 / T
WS-53201
PAN W/DRAIN 200-500 /TD
WS-55742
2
Application
P2-31869
DRAIN UNITS
M200 DIGITAL
M227 DIGITAL
1
2
M200 T-STAT NARROW
M200 DIGITAL DRAIN
M200 DIGITAL DRAIN, MANIFOLD
M227 DIGITAL, DRAIN, MANIFOLD
1
M227 DIGITAL, AUTOFILL
1
M200 T-STAT, AUTOFILL
M200 T-STAT & INFINITE
M200 T-STAT & INFINITE, DRAIN
2
PAN W/DRAIN 200-500DM/TDM
M200 T-STAT & INFINITE, DRAIN,
MANIFOLD
WS-500700
PAN ASSY 12X27 TDM
4
2V-35609
VALVE 1 IN GATE BRONZE
M227 T-STAT, DRAIN, MANIFOLD
5
WS-503713
PROBE ASSY, SS AUTOFILL WRMR
1
AUTOFILL UNITS
6
2K-48198
ELBOW 3/8 X 90DEG BRASS
1
AUTOFILL UNITS
7
2K-48197
NIPPLE 3/8 NPT X 2 BRASS
1
AUTOFILL UNITS
8
2V-47650
VALVE ANTISYPHON 3/8
1
AUTOFILL UNITS
9
2K-47662
FTG STR BRS 3/8NPT X3/8IN
1
AUTOFILL UNITS
10
2C-46591
CLAMP HOSE 5/8
2
AUTOFILL UNITS
1
MANIFOLD UNITS
11
2K-31040
BUSHING HEYCO 7/8 OD
1
THERMOSTAT UNITS
12
WS-50131
TERM BLOCK KIT (RETRO 30131)
1
INFINITE & AUTOFILL UNITS
13
2C-41974
NUT 8-32 HEX 7/8 LONG ALU
2
AUTOFILL UNITS
2J-35385
LIGHT SIGNAL GLO DOT RED
2J-35687
LIGHT SIGNAL GLO DOT
P2-Z12288
PANEL, CONTROL
1
T-STAT & INFINITE UNITS NON-AF
P2-Z12589
PANEL, CONTROL MOD 200/400
1
AUTOFILL UNITS
E7-49046
BOX OUTLET MOD WARM
14
15
16
17
18
20
P2-48175
BOX OUTLET MOD200/400TDM
2T-38968
THERMO K TYPE
2T-46551
THERMO CTRL 96IN CAP
2T-45917
THERMO CTRL W/AUX WARMERS
2E-30570
SWITCH INFINITE, 120V
2E-30562
SWITCH INFINITE, 240V
2R-44373
KNOB CONTROL ASSY WARMERS
2R-40498
KNOB ASSY MOD 100DT
2E-46529
SOLENOID VALVE 1/4NPT 240
2
1
INFINITE UNITS
T-STAT UNITS
T-STAT & INFINITE UNITS NON-AF
AUTOFILL UNITS
T-STAT UNITS
2
T-STAT UNITS w/ 96IN CAPILLARY
T-STAT UNITS, AUTOFILL
2
2
1
16
INFINITE UNITS, 120V
INFINITE UNITS, 240V
INFINITE UNITS
T-STAT UNITS
AUTOFILL UNITS
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
Fig No
PARTS LIST: M200-227 SERIES
Model: Modular Warmers M200-227T, TD, TDM, TDMAF, TN, M200-227E, CE, ED, EDM, EDMAF, EN
Fig No
21
Description
BRKT MTG THERMO INFINITE
P2-48176
BRKT THERMO MOD200TDM AUT
Qty
2
Application
T-STAT & INFINITE UNITS
T-STAT AUTOFILL
22
2E-306865
CONTROL LIQ LEVEL 208/240
1
AUTOFILL UNITS
23
2I-40034
GROMMET SCREW T4
4
AUTOFILL UNITS
24
2K-33996X
FTG FLEX CONDUIT 90X3/8
2
25
2I-Z12311
GASKET-FIBER WASHER
2
P2-300712
COVER BOT M227-427TDM/AM
2
P2-35004
COVER BOTTOM 200 SERIES
1
P2-303359
SHROUD SIDE MODS ROHS
P2-300593
SHROUD SIDE MOD TDN
P2-Z15948
SHROUD, FRONT UNIVERSAL
P2-33909
SHROUD FRONT/REAR MOD200
P2-300592
SHROUD FRT/RR MOD200TDN
29
2H-36050
INSUL FG .6 MICRO 1/36
SOLD BY FOOT
30
2H-36196
INSUL FG .6 MICRO 1X45
SOLD BY FOOT
P2-WL0082
PAN ELEM ASSY
P2-WL0096
PAN ELEM ASSY MOD 227-527
WS-503843
KIT PAN ELEM W/ELEMENT 208/240
WS-503701
KIT ELEM PAN W/ELEMENT
WS-503840
KIT ELEM PAN W/ELEMENT
M227 T-STAT
WS-50396
ELEM 120V 1200W
M200 INFINITE, 120V
WS-50398
ELEM 240V 1200W M P
2N-46681UL
ELEM 120V 1650W
2N-303375UL
ELEM HEATING 240V 1650W
M200 T-STAT, 240V
2N-300706UL
ELEM 240V 1650W 12 X 27
M227
WS-55707
COVER ELEM MOD WARMER
INFINITE UNITS
WS-503842
KIT ELEM PAN W/O ELEMENT
WS-503370
PAN, ELEMENT MODS
WS-503841
KIT ELEM PAN W/O ELEMENT
34
D8-303352
BRKT THERMO BULB
35
P2-WL0081
PAN ELEM ASSY MOD200-500
2
INFINITE 240V
36
WS-50374
THERMO, HI-LIMIT, SFTY, 550F
2
INFINITE UNITS
26
27
28
31
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
Part No
P2-40843
32
33
2
M227
M200
M200
M200 NARROW
1
M200, 227
2
M200 NARROW
M200 DIGITAL
M227 DIGITAL
2
M200 T-STAT & INFINITE
M200 T-STAT NARROW
M200 INFINITE, 240V
2
2
M200 T-STAT, 120V
M200, T-STAT & DIGITAL
M200 NARROW
M227
2
THERMOSTAT UNITS
NI
2C-30397
CLIP ELEM WRMRS SML
18
VARIOUS OLDER UNITS
NI
2E-200372
CORD SET, 12/3 CORD 6-20
1
M200C
17
PARTS LIST: M300-327 SERIES
Model: Modular Warmers M300-327T, TD, TDM, TDMAF, TN, M300-327E, CE, ED, EDM, EDMAF, EN
1
2
3
Part No
P2-31869
Description
Qty
SCREEN DRAIN ASSY WARMER
3
Application
DRAIN UNITS
P2-Z14636
PAN ASSY 12X20 EAF W/TEE
M300 DIGITAL
P2-Z14647
PAN ASSY 12X27 EAF
M327 DIGITAL
P2-WL0064
PAN ASSY W/ELBOW MODTDMN
WS-503893
PAN ASSY 200-500TDM A/F
M300 T-STAT & INFINITE
WS-504101
PAN ASSY 12X27 AF
M327 T-STAT
P2-Z14639
PAN ASSY 12X20 E
M300 DIGITAL
P2-Z14637
PAN ASSY 12X20 ED w/DRAIN
P2-Z14638
PAN ASSY 12X20 EDM
P2-Z14646
PAN ASSY 12X27 EDM
P2-WL0063
PAN ASSY AF MODTDMN
WS-55741
PAN W/O DRAIN 200-500 / T
WS-53201
PAN W/DRAIN 200-500 /TD
WS-55742
PAN W/DRAIN 200-500DM/TDM
1
3
M300 T-STAT NARROW
M300 DIGITAL DRAIN
M300 DIGITAL DRAIN, MANIFOLD
M327 DIGITAL, DRAIN, MANIFOLD
2
M327 DIGITAL, AUTOFILL
2
M300 T-STAT, AUTOFILL
M300 T-STAT & INFINITE
3
M300 T-STAT & INFINITE, DRAIN
M300 T-STAT & INFINITE, DRAIN, MANIFOLD
WS-500700
PAN ASSY 12X27 TDM
4
2V-35609
VALVE 1 IN GATE BRONZE
1
MANIFOLD UNITS
M327 T-STAT, DRAIN, MANIFOLD
5
WS-503713
PROBE ASSY, SS AUTOFILL WRMR
1
AUTOFILL UNITS
6
2K-48198
ELBOW 3/8 X 90DEG BRASS
1
AUTOFILL UNITS
7
2K-48197
NIPPLE 3/8 NPT X 2 BRASS
1
AUTOFILL UNITS
8
2V-47650
VALVE ANTISYPHON 3/8
1
AUTOFILL UNITS
9
2K-47662
FTG STR BRS 3/8NPT X3/8IN
1
AUTOFILL UNITS
10
2C-46591
CLAMP HOSE 5/8
2
AUTOFILL UNITS
11
2K-31040
BUSHING HEYCO 7/8 OD
1
THERMOSTAT UNITS
12
WS-50131
TERM BLOCK KIT (RETRO 30131)
1
INFINITE & AUTOFILL UNITS
13
2C-41974
NUT 8-32 HEX 7/8 LONG ALU
2
AUTOFILL UNITS
14
15
2J-35385
LIGHT SIGNAL GLO DOT RED
2J-35687
LIGHT SIGNAL GLO DOT
P2-Z12592
PANEL, CONTROL
3
1
15
P2-Z15586
PANEL, CONTROL MOD300TDM
1
15
P2-Z12588
PANEL, CONTROL MOD600 TDM
1
16
P2-46685
BOX OUTLET MOD300, 400, 500
16
P2-48178
BOX OUTLET MOD600TDM
2T-38968
THERMO K TYPE
2T-46551
THERMO CTRL 96IN CAP
2T-45917
THERMO CTRL W/AUX WARMERS
2E-30570
SWITCH INFINITE, 120V
2E-30562
SWITCH INFINITE, 240V
2R-44373
KNOB CONTROL ASSY WARMERS
2R-40498
KNOB ASSY MOD 100DT
2E-46529
SOLENOID VALVE 1/4NPT 240
17
18
20
1
INFINITE UNITS
T-STAT UNITS
INFINITE UNITS NON-AF
M300/327 T-STAT, DRAIN, MANIFOLD
T-STAT & INFINITE UNITS NON-AF
AUTOFILL UNITS
T-STAT UNITS
3
T-STAT UNITS w/ 96IN CAPILLARY
T-STAT UNITS, AUTOFILL
3
3
1
18
INFINITE UNITS, 120V
INFINITE UNITS, 240V
INFINITE UNITS
T-STAT UNITS
AUTOFILL UNITS
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
Fig No
PARTS LIST: M300-327 SERIES
Model: Modular Warmers M300-327T, TD, TDM, TDMAF, TN, M300-327E, CE, ED, EDM, EDMAF, EN
Fig No
21
Description
BRKT CONT MTG MOD 300 400
P2-48586
BRKT THERMO MOD300T
Qty
Application
INFINITE UNITS
1
T-STAT
P2-47863
BRKT THERMO MOD BMW ROHS
22
2E-306865
CONTROL LIQ LEVEL 208/240
1
AUTOFILL UNITS
23
2I-40034
GROMMET SCREW T4
4
AUTOFILL UNITS
24
2K-33996X
FTG FLEX CONDUIT 90X3/8
2
25
2I-Z12311
GASKET-FIBER WASHER
2
P2-300702
COVER BOT M327/ 527TDM/A
P2-307110
COVER BOTTOM 300 SERIES
P2-303359
SHROUD SIDE MOD ROHS
26
27
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
Part No
P2-37809
T-STAT AUTOFILL
1
2
M327
M300
M300
P2-300593
SHROUD SIDE MOD TDN
2
M300 NARROW
P2-303357
SHROUD FRONT MOD300, 327T
1
M300, 327
28
P2-48193
SHROUD REAR MOD 300 ROHS
1
M300, 327
P2-307128
SHROUD FT/RR MOD300TDMN
2
M300 NARROW
29
2H-36050
INSUL FG .6 MICRO 1/36
SOLD BY FOOT
30
2H-36196
INSUL FG .6 MICRO 1X45
SOLD BY FOOT
P2-WL0082
PAN ELEM ASSY
P2-WL0096
PAN ELEM ASSY MOD 227-527
WS-503843
KIT PAN ELEM W/ELEMENT 208/240
WS-503701
KIT ELEM PAN W/ELEMENT
2
P2-WL0072
PAN ELEM ASSY MID MOD300T
1
WS-503840
KIT ELEM PAN W/ELEMENT
3
WS-50396
ELEM 120V 1200W
M300 INFINITE, 120V
WS-50398
ELEM 240V 1200W M P
M300 INFINITE, 240V
2N-46681UL
ELEM 120V 1650W
31
32
M300 DIGITAL
3
M327 DIGITAL
M300 T-STAT & INFINITE
3
M300 T-STAT NARROW
M327 T-STAT
M300 T-STAT, 120V
2N-303375UL ELEM HEATING 240V 1650W
M300 T-STAT & DIGITAL, 240V,
2N-300706UL ELEM 240V 1650W 12 X 27
M327
WS-55707
COVER ELEM MOD WARMER
WS-503842
KIT ELEM PAN W/O ELEMENT
3
INFINITE UNITS
M300, T-STAT & DIGITAL
2
M300, NARROW, OUTSIDE
M300, NARROW, INSIDE
WS-WL0332
KIT ELEM PAN W/O ELEMENT / INSIDE
1
WS-503370
PAN, ELEMENT MODS
2
67-307041
ASSY-MID-ELEM PAN M300TN
1
WS-503841
KIT ELEM PAN W/O ELEMENT
3
M327
34
D8-303352
BRKT THERMO BULB
3
THERMOSTAT UNITS
35
P2-WL0081
PAN ELEM ASSY MOD200-500
3
INFINITE 240V
36
WS-50374
THERMO, HI-LIMIT, SFTY, 550F
3
INFINITE UNITS
NI
2C-30397
CLIP ELEM WRMRS SML
18
VARIOUS OLDER UNITS
33
19
M300 NARROW
PARTS LIST: M400-427 SERIES
Model: Modular Warmers M400-427T, TD, TDM, TDMAF, M400-427E, CE, ED, EDM, EDMAF
Description
Qty
P2-31869
SCREEN DRAIN ASSY WARMER
4
P2-Z14636
PAN ASSY 12X20 EAF W/TEE
P2-Z14647
PAN ASSY 12X27 EAF
WS-503893
PAN ASSY 200-500TDM A/F
WS-504101
PAN ASSY 12X27 AF
M427 T-STAT
P2-Z14639
PAN ASSY 12X20 E
M400 DIGITAL
P2-Z14637
PAN ASSY 12X20 ED w/DRAIN
P2-Z14638
PAN ASSY 12X20 EDM
P2-Z14646
PAN ASSY 12X27 EDM
WS-55741
PAN W/O DRAIN 200-500 / T
WS-53201
PAN W/DRAIN 200-500 /TD
WS-55742
PAN W/DRAIN 200-500DM/TDM
WS-500700
PAN ASSY 12X27 TDM
4
2V-35609
5
1
2
3
Part No
Application
DRAIN UNITS
M400 DIGITAL
1
M427 DIGITAL
M400 T-STAT & INFINITE
4
M400 DIGITAL DRAIN
3
M400 DIGITAL DRAIN, MANIFOLD, AUTOFILL
4
M427 DIGITAL, DRAIN, MANIFOLD
3
M427 DIGITAL, DRAIN, MANIFOLD AUTOFILL
M400 DIGITAL DRAIN, MANIFOLD
M400 T-STAT & INFINITE
4
M400 T-STAT & INFINITE, DRAIN
3
M400 T-STAT & INFINITE, DRAIN, MANIFOLD, AUTOFILL
4
M427 T-STAT, DRAIN, MANIFOLD
3
M427 T-STAT, DRAIN, MANIFOLD, AUTOFILL
VALVE 1 IN GATE BRONZE
1
MANIFOLD UNITS
WS-503713
PROBE ASSY, SS AUTOFILL
WRMR
1
AUTOFILL UNITS
6
2K-48198
ELBOW 3/8 X 90DEG BRASS
1
AUTOFILL UNITS
7
2K-48197
NIPPLE 3/8 NPT X 2 BRASS
1
AUTOFILL UNITS
8
2V-47650
VALVE ANTISYPHON 3/8
1
AUTOFILL UNITS
9
2K-47662
FTG STR BRS 3/8NPT X3/8IN
1
AUTOFILL UNITS
10
2C-46591
CLAMP HOSE 5/8
2
AUTOFILL UNITS
11
2K-31040
BUSHING HEYCO 7/8 OD
1
THERMOSTAT UNITS
12
WS-50131
TERM BLOCK KIT (RETRO
30131)
1
INFINITE & AUTOFILL UNITS
13
2C-41974
NUT 8-32 HEX 7/8 LONG ALU
2
AUTOFILL UNITS
2J-35385
LIGHT SIGNAL GLO DOT RED
2J-35687
LIGHT SIGNAL GLO DOT
P2-Z12288
PANEL, CONTROL, (SPLIT)
P2-Z12589
PANEL, CONTROL, (SPLIT)
P2-Z12591
PANEL, CONTROL MOD 400
P2-Z12584
PANEL, CONTROL MOD400TDM
P2-48290
BOX OUTLET MOD400 DM TDM
E7-49046
BOX OUTLET MOD (SPLIT)
P2-48175
BOX OUTLET MOD (SPLIT)
P2-46685
BOX OUTLET MOD 400
M400 INFINITE, DRAIN, MANIFOLD
P2-48178
BOX, CONTROL AF
MOD400TDMAF1, MOD400TDMAFS, MOD427TDMAF1
14
15
16
M400 T-STAT & INFINITE, DRAIN, MANIFOLD
2
1
1
INFINITE UNITS
T-STAT UNITS
MOD400TDMAF, MOD400TDMAF6, MOD427TDMAF
INFINITE UNITS NON-AF
M400-427, T-STAT, DRAIN, MANIFOLD, AUTOFILL
M400-427, T-STAT, DRAIN, MANIFOLD
1
20
MOD400TDMAF, MOD400TDMAF6, MOD427TDMAF
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
Fig No
PARTS LIST: M400-427 SERIES
Model: Modular Warmers M400-427T, TD, TDM, TDMAF, M400-427E, CE, ED, EDM, EDMAF
Fig No
Description
Qty
Application
2T-38968
THERMO K TYPE
2T-46551
THERMO CTRL 96IN CAP
2T-45917
THERMO CTRL W/AUX
WARMERS
2E-30570
SWITCH INFINITE, 120V
2E-30562
SWITCH INFINITE, 240V
2R-44373
KNOB CONTROL ASSY
WARMERS
2R-40498
KNOB ASSY MOD 100DT
2E-46529
SOLENOID VALVE 1/4NPT 240
1
AUTOFILL UNITS
P2-40843
BRKT MTG THERMO INFINITE
2
T-STAT (SPLIT CONTROL)
P2-48176
BRKT THERO MOD200TDM AUT
1
MOD400TDMAF(6), MOD427TDMAF
P2-48285
BRKT THERMO MOD400
1
M400-427 T-STAT, DRAIN, MANIFOLD, AUTOFILL
22
2E-306865
CONTROL LIQ LEVEL 208/240
1
AUTOFILL UNITS
23
2I-40034
GROMMET SCREW T4
4
AUTOFILL UNITS
24
2K-33996X
FTG FLEX CONDUIT 90X3/8
2
25
2I-Z12311
GASKET-FIBER WASHER
2
P2-300712
COVER BOT M227-427TDM/AM
2
M427E, MOD427TDM (AF)
P2-35004
COVER BOTTOM 200 SERIES
2
M400
P2-303359
SHROUD SIDE MODS ROHS
2
M400
P2-Z14627
SHROUD, FRONT M4
P2-48192
SHROUD REAR MOD 420 427
17
18
20
21
26
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
Part No
27
28
T-STAT UNITS
4
T-STAT UNITS w/ 96IN CAPILLARY
T-STAT UNITS, AUTOFILL
4
4
INFINITE UNITS, 120V
INFINITE UNITS, 240V
INFINITE UNITS
T-STAT UNITS
M400, 427, DIGITAL
1
M400
P2-303358
SHROUD FRONT MOD 400 427
29
2H-36050
INSUL FG .6 MICRO 1/36
SOLD BY FOOT
30
2H-36196
INSUL FG .6 MICRO 1X45
SOLD BY FOOT
P2-WL0082
PAN ELEM ASSY
M400 DIGITAL
P2-WL0096
PAN ELEM ASSY MOD 227-527
M427 DIGITAL
WS-503843
KIT PAN ELEM W/ELEMENT
208/240
WS-503840
KIT ELEM PAN W/ELEMENT
M427 T-STAT
WS-50398
ELEM 240V 1200W M P
M400 INFINITE, 240V
2N-303375UL
ELEM HEATING 240V 1650W
2N-300706UL
ELEM 240V 1650W 12 X 27
M427
WS-55707
COVER ELEM MOD WARMER
M400, INFINITE UNITS
WS-503842
KIT ELEM PAN W/O ELEMENT
WS-503841
KIT ELEM PAN W/O ELEMENT
34
D8-303352
BRKT THERMO BULB
4
THERMOSTAT UNITS
35
P2-WL0081
PAN ELEM ASSY MOD200-500
4
INFINITE 240V
36
WS-50374
THERMO, HI-LIMIT, SFTY, 550F
4
INFINITE UNITS
NI
2C-30397
CLIP ELEM WRMRS SML
36
VARIOUS OLDER UNITS
31
32
33
M400 INFINITE & T-STAT
4
4
4
M400 T-STAT & INFINITE
M400 T-STAT, 240V
M400, T-STAT & DIGITAL
M427
21
PARTS LIST: M500-527 SERIES
Model: Modular Warmers M500-527T, TD, TDM, TDMAF, M500-527E, CE, ED, EDM, EDMAF
1
2
Description
Qty
P2-31869
Part No
SCREEN DRAIN ASSY WARMER
5
P2-Z14636
PAN ASSY 12X20 EAF W/TEE
P2-Z14647
PAN ASSY 12X27 EAF
WS-503893
PAN ASSY 200-500TDM A/F
WS-504101
PAN ASSY 12X27 AF
P2-Z14639
PAN ASSY 12X20 E
P2-Z14637
PAN ASSY 12X20 ED w/DRAIN
P2-Z14638
PAN ASSY 12X20 EDM
P2-Z14646
PAN ASSY 12X27 EDM
WS-55741
PAN W/O DRAIN 200-500 / T
WS-53201
PAN W/DRAIN 200-500 /TD
WS-55742
PAN W/DRAIN 200-500DM/TDM
WS-500700
PAN ASSY 12X27 TDM
4
2V-35609
VALVE 1 IN GATE BRONZE
5
WS-503713
6
2K-48198
7
3
Application
DRAIN UNITS
M500 DIGITAL
1
M527 DIGITAL
M500 T-STAT & INFINITE
M527 T-STAT
M500 DIGITAL
5
M500 DIGITAL DRAIN
4
M500 DIGITAL DRAIN, MANIFOLD, AUTOFILL
5
M527 DIGITAL, DRAIN, MANIFOLD
4
M527 DIGITAL, DRAIN, MANIFOLD AUTOFILL
M500 DIGITAL DRAIN, MANIFOLD
M500 T-STAT & INFINITE
5
M500 T-STAT & INFINITE, DRAIN
4
M500 T-STAT & INFINITE, DRAIN, MANIFOLD,AUTOFILL
5
M527 T-STAT, DRAIN, MANIFOLD
4
M527 T-STAT, DRAIN, MANIFOLD, AUTOFILL
1
MANIFOLD UNITS
PROBE ASSY, SS AUTOFILL
1
AUTOFILL UNITS
ELBOW 3/8 X 90DEG BRASS
1
AUTOFILL UNITS
2K-48197
NIPPLE 3/8 NPT X 2 BRASS
1
AUTOFILL UNITS
8
2V-47650
VALVE ANTISYPHON 3/8
1
AUTOFILL UNITS
9
2K-47662
FTG STR BRS 3/8NPT X3/8IN
1
AUTOFILL UNITS
10
2C-46591
CLAMP HOSE 5/8
2
AUTOFILL UNITS
M500 T-STAT & INFINITE, DRAIN, MANIFOLD
11
2K-31040
BUSHING HEYCO 7/8 OD
1
THERMOSTAT UNITS
12
WS-50131
TERM BLOCK KIT (RETRO 30131)
1
INFINITE & AUTOFILL UNITS
13
2C-41974
NUT 8-32 HEX 7/8 LONG ALU
2
AUTOFILL UNITS
14
15
16
17
2J-35385
LIGHT SIGNAL GLO DOT RED
2J-35687
LIGHT SIGNAL GLO DOT
P2-Z12594
PANEL, CONTROL MOD500 TDM
M500-527, T-STAT
P2-Z12288
PNL, CNTRL/MOD
MOD500TDMFA(6), MOD527TDMAF(6) (SPLTI)
P2-Z12588
PANEL, CONTROL MOD TDM
P2-Z12590
PANEL, CONTROL MOD500
M500, INFINITE UNITS
P2-48290
BOX OUTLET MOD400 DM TDM
M500-527, T-STAT
E7-49046
BOX OUTLET MOD WAR
2
1
1
INFINITE UNITS
T-STAT UNITS
MOD500TDMFA(6), MOD527TDMAF(6) (SPLTI)
MOD500TDMFA(6), MOD527TDMAF(6) (SPLTI)
P2-48178
BOX CONTROL MOD AF
P2-46685
BOX OUTLET MOD 500
M500, INFINITE UNITS
2T-38968
THERMO K TYPE
T-STAT UNITS
2T-46551
THERMO CTRL 96IN CAP
2T-45917
THERMO CTRL W/AUX WARMRS
2E-30570
SWITCH INFINITE, 120V
2E-30562
SWITCH INFINITE, 240V
5
MOD500TDMFA(6), MOD527TDMAF(6) (SPLTI)
T-STAT UNITS w/ 96IN CAPILLARY
T-STAT UNITS, AUTOFILL
5
22
INFINITE UNITS, 120V
INFINITE UNITS, 240V
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
Fig No
PARTS LIST: M500-527 SERIES
Model: Modular Warmers M500-527T, TD, TDM, TDMAF, M500-527E, CE, ED, EDM, EDMAF
Fig No
Description
Qty
Application
2R-44373
KNOB CONTROL ASSY
WARMERS
2R-40498
KNOB ASSY MOD 100DT
2E-46529
SOLENOID VALVE 1/4NPT 240
1
AUTOFILL UNITS
P2-48285
BRKT THERMO MOD400
1
M500-527, T-STAT
P2-40843
BRKT MTG THERMO INFINITE
2
MOD500TDMFA(6), MOD527TDMAF(6) (SPLTI)
P2-47863
BRKT THERMO MOD
1
MOD500TDMFA(6), MOD527TDMAF(6) (SPLTI)
P2-37809
BRKT CONT MTG MOD
1
M500 INFINITE
22
2E-306865
CONTROL LIQ LEVEL 208/240
1
AUTOFILL UNITS
23
2I-40034
GROMMET SCREW T4
4
AUTOFILL UNITS
24
2K-33996X
FTG FLEX CONDUIT 90X3/8
2
25
2I-Z12311
GASKET-FIBER WASHER
2
P2-35004
COVER BOTTOM 200 SERIES
P2-307110
COVER BOTTOM MOD300
SERIES
P2-300712
COVER BOT MOD227/427TDM/A
P2-300704
COVER BOT MOD327/527TDM/A
P2-303359
SHROUD SIDE MODS ROHS
P2-Z14627
SHROUD, FRONT M4
P2-48191
SHROUD REAR MOD 500 527
18
20
21
26
27
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
Part No
28
5
T-STAT UNITS
M500
1
M527
2
1
P2-303376
SHROUD FRONT MOD 500 527T
2H-36050
INSUL FG .6 MICRO 1/36
SOLD BY FOOT
30
2H-36196
INSUL FG .6 MICRO 1X45
SOLD BY FOOT
P2-WL0082
PAN ELEM ASSY
P2-WL0096
PAN ELEM ASSY MOD 227-527
32
WS-503843
KIT PAN ELEM W/ELEMENT
208/240
WS-503840
KIT ELEM PAN W/ELEMENT
WS-50398
ELEM 240V 1200W M P
2N-303375UL ELEM HEATING 240V 1650W
WS-55707
COVER ELEM MOD WARMER
WS-503842
KIT ELEM PAN W/O ELEMENT
WS-503841
KIT ELEM PAN W/O ELEMENT
M500
M500 INFINITE & T-STAT
M500 DIGITAL
M527 DIGITAL
5
M500 T-STAT & INFINITE
M527 T-STAT
M500 INFINITE, 240V
5
2N-300706UL ELEM 240V 1650W 12 X 27
33
M500
M500, 427, DIGITAL
29
31
INFINITE UNITS
M500 T-STAT, 240V
M527
M500, INFINITE UNITS
5
M500, T-STAT & DIGITAL
M527
34
D8-303352
BRKT THERMO BULB
4
THERMOSTAT UNITS
35
P2-WL0081
PAN ELEM ASSY MOD200-500
4
INFINITE 240V
36
WS-50374
THERMO, HI-LIMIT, SFTY, 550F
4
INFINITE UNITS
NI
2C-30397
CLIP ELEM WRMRS SML
36
VARIOUS OLDER UNITS
23
EXPLODED VIEW: DETAIL A
3
2
1
4
5
6
3
18
3
17
7
9
13
Nameplate
12
11
8
10
14
15
SOME ITEMS ARE A REPRESENTATION
OF THE ACTUAL APPREANCE DUE TO
YOUR SPECIFIC MODEL.
Detail A
MODE - EAF
Digital Control Fab Warmer
IL2523, Rev. -, 8/21/12
24
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
16
PARTS LIST: DETAIL A
Detail A: Digital Control Box Assy
Fig No
Description
Application
1
2A-Z3429
SPACER-NYLON .175X.375X.5
AUTO-FILL
2
2E-306865
CONTROL LIQ LEVEL 208/240
AUTO-FILL
3
2C-31053
NUT 8-32 KEPS MS NICKEL
4
2E-46529
SOLENOID VALV 1/4NPT 240
AUTO-FILL
5
2C-1493
SCREW 8-32X3/8 RHP STL NP
AUTO-FILL
P2-Z14490
CONTROL BOX WELD - SMALL
M200-227E
P2-Z14497
CONTROL BOX WELD - MEDIUM
M200-227EAF, M300-327E
P2-Z14493
CONTROL BOX WELD - LARGE
M300-327EAF, M400/427E, M400/427EAF,
M500/527E, M500/527EAF
6
7
2C-35736
NUT 8-32 HEX KEPS MS GREE
ALL
8
2E-37465
TERM BLOCK 3POLE 85AMP
ALL
9
2C-1496
SCREW 8-32X3/4 RHP STL NP
ALL
10
2C-Z2594
NUT 6-32 HEX W STL NP
ALL
2E-Z14534
CONTROLLER, TEMP 230V
AUTO-FILL
2E-Z14534-1
THERMISTOR, 90”
2E-Z14534-2
THERMISTOR, 126”
11
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
Part No
6’ LEAD
12
2K-Z1971
SPACER .257X.75X.25 NYLON
AUTO-FILL
13
2C-200110
WASHER, #8 FLAT 18-8 SS
ALL
2M-Z14495
GRAPHIC M200/227EAF
M200-227E
2M-Z14498
GRAPHIC M200/227EAF
M200-227EAF
2M-Z14499
GRAPHIC M300/327E
M300-327E
2M-Z14526
GRAPHIC M300/327EAF
M300-327EAF
2M-Z14527
GRAPHIC M400/427E
M400/427E, M400/427EAF
2M-Z14529
GRAPHIC M500/527E
M500/527E, M500/527EAF
15
2E-Z1858
SWITCH-LIGHTED
AUTO-FILL
16
2C-33935
SCREW 6ABX5/16 PH PAN SMS
ALL
P2-Z14494
CONTROL PANEL M200/227E
M200-227E
P2-Z14496
CONTROL PANEL M200/227EAF
M200-227EAF
P2-Z14522
CONTROL PANEL M300/327E
M300-327E
P2-Z14524
CONTROL PANEL M300/327EAF
M300-327EAF
P2-Z14525
CONTROL PANEL M400/427E
M400/427E, M400/427EAF
P2-Z14492
CONTROL PANEL M500/527E
M500/527E, M500/527EAF
18
2E-130601
WIRE ASSY 14GA GREEN 8”
ALL
NI
2K-34136X
FTG FLEX CON 90 X 1/2 MOD
AUTO-FILL
14
17
25
WIRING DIAGRAM: Infinite Control Units
WIRING DIAGRAM FOR MODULAR 200 WARMER
208/240V SINGLE PHASE
SER. NO. WM 1000 & UP
ELEMENT
(2)
SAFETY
THERMO (2)
7
5
6
8
H2
H1
P
L1
INFINITE
SWITCH (2)
L2
H2
H1
P
L1
L2
4
PILOT
LIGHT (2)
SINGLE PHASE
L1
2
L3
3
L2
1
VOLTS
AMPS
208
240
8.7
10.0
TERM. BLOCK
REV. I PN 2M-31222
WIRING DIAGRAM FOR MODULAR 300 WARMER
208/240V SINGLE PHASE OR THREE PHASE
SER. NO. MOD-300 MW 1000 & UP
6
SAFETY
THERMO (3)
ELEMENT
(3)
L1
4
2
5
11
13
12
15
14
H2
H1
P
L1
INFINITE
SWITCH (3)
L2
H2
H1
P
L1
1
P
SINGLE PHASE
H2
H1
L2
L2
3
16
L1
L2
6
PILOT
LIGHT (3)
THREE PHASE
L1
4
1
L3
5
2
VOLTS
208
240
NOM. AMPS PER LINE
THREE PHASE
SINGLE
L2
L3
L1
PHASE
7.5
8.7
7.5
8.7
7.5
8.7
13.0
15.0
L2
3
1
TERM. BLOCK
50
HZ
60
REV. H PN 2M-35758
MOD300E & MOD327E Series
26
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
MOD200 & MOD227 Series
WIRING DIAGRAM: Infinite Control Units
WIRING DIAGRAM FOR MODULAR 400 WARMER
208/240V SINGLE PHASE OR THREE PHASE
SER. NO. MOD-400 MW 1250 & UP
8
ELEMENT
(4)
6
L1
4
2
SAFETY
THERMO (4)
11
P
H2
16
H2
H1
L2
L1
17
7
5
14
H1
PILOT
LIGHT (4)
15
13
12
P
L1
INFINITE
SWITCH (4)
L2
4
2
18
H2
H1
P
L1
L2
L2
3
P
L1
SINGLE PHASE
1
H2
H1
L2
8
5
THREE PHASE
3
1
4
L1
2
L3
6
5
7
NOM. AMPS PER LINE
THREE PHASE
SINGLE
L1
L2
L3
PHASE
VOLTS
208
240
11.2
13.0
11.2
13.0
7.5
8.7
L2
3
1
TERM. BLOCK
50
HZ
17.3
20.0
60
REV. H PN 35759
MOD400E & MOD427E Series
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
WIRING DIAGRAM FOR MODULAR 500 WARMER
208/240V SINGLE PHASE OR THREE PHASE
SER. NO. MOD-400 MW 1500 & UP
ELEMENT
(5)
10
8
L1
6
4
2
11
SAFETY
THERMO (5)
13
9
15
17
19
7
L2
5
3
12
14
H2
H1
P
PILOT
LIGHT (5)
L1
16
H2
H1
L2
P
L1
INFINITE
SWITCH (5)
L2
18
H2
H1
P
L1
20
H2
H1
L2
1
P
L1
H2
H1
L2
P
SINGLE PHASE
L1
L2
10
6
4
1
2
3
THREE PHASE
7
5
8
6
4
L1
2
L3
7
5
9
L2
3
VOLTS
208
240
NOM. AMPS PER LINE
THREE PHASE
SINGLE
L2
L3
L1
PHASE
15.0
17.0
11.2
13.0
11.2
13.0
21.6
25.0
1
TERM. BLOCK
50
HZ
60
REV. H PN 2M-35760
MOD500E & MOD527E Series
27
WIRING DIAGRAM: Electronically Control Units
NOTES: WIRING DIAGRAM MOD200E
1) TEMPERATURE AND WATER LEVEL SENSOR WIRES
ROUTE SEPARATELY IN SMALLER CONDUIT.
2) GROUND TO EARTH USING SUPPLIED STUD IN CONTROL BOX.
3) OPTIONAL WATER LEVEL CONTROL: WIRES 19 & 35
SHOULD BE CAPPED IF NOT USED.
MODEL
V
3&
WATTS
MOD400E 208
50/60 Hz 240
4
19
3
PROBE
2
COM
38
1
36
35
ALTERNATE WATER
LEVEL CONTROL
1&
6.0 10.3 6.0 11.9
6.9 11.9 6.9 13.8
2480
3300
37
34
L1= 6
L2= 4
3 101
1 102
L3
L1
SENSOR
PROBE
L2
SENSOR
PROBE
WATER PAN
SINGLE PHASE
POWER INPUT
PROBE
HEATING ELEMENT
GRN
HEATING ELEMENT
34 37
6
COMMONMAX
5
3
L1= 6 101
L3= 3
L2= 1 4 102
2
TEMP CONTROL
(BACK VIEW)
TEMP CONTROL
(BACK VIEW)
COM
NO
NC
INPUT
LOW WATER CONTROL
RELAY
38
35 19
L3
L1
L2
RELAY
36
WATER FILL
VALVE
INPUT
INPUT
4
1
101
4
5
22
102
S1
1
2
21
M200E & M227E Series
NOTES: WIRING DIAGRAM MOD300E
1) TEMPERATURE AND WATER LEVEL SENSOR WIRES ROUTE SEPARATELY IN SMALLER CONDUIT.
2) GROUND TO EARTH USING SUPPLIED STUD IN CONTROL BOX.
3) OPTIONAL WATER LEVEL CONTROL: WIRES 19 & 35 SHOULD BE CAPPED IF NOT USED.
37
34
19
4
PROBE
38
3
35
2
COM
36
1
MODEL
V
WATTS
MOD300E
208
240
3720
4950
3&
1&
ALTERNATE WATER
LEVEL CONTROL
10.3 10.3 10.3 17.9
11.9 11.9 11.9 20.6
L1= 6
50/60 Hz
L2= 4
9
3 101
7
1 102
L3
L1
SENSOR
PROBE
SENSOR
PROBE
L2
SENSOR
PROBE
WATER PAN
SINGLE PHASE
POWER INPUT
PROBE
HEATING ELEMENT
GRN
HEATING ELEMENT
HEATING ELEMENT
34 37
9
COMMON MAX
COM
NO
NC
INPUT
LOW WATER CONTROL
8
5
6
TEMP CONTROL
(BACK VIEW)
38
L1= 6
L3= 3
L2= 1
2
TEMP CONTROL
(BACK VIEW)
RELAY
35 19
3
RELAY
TEMP CONTROL
(BACK VIEW)
9 101
7
4 102
L3
L1
L2
RELAY
36
WATER FILL
VALVE
INPUT
INPUT
7
4
INPUT
1
101
4
5
22
102
S1
35
19
ON NON-AF MODELS
M300E & M327E Series
28
1
2M-Z14566rev~
2
21
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
2M-Z14565 rev~
WIRING DIAGRAM: Electronically Control Units
NOTES: WIRING DIAGRAM MOD400E
1) TEMPERATURE AND WATER LEVEL SENSOR WIRES ROUTE SEPARATELY IN SMALLER CONDUIT.
2) GROUND TO EARTH USING SUPPLIED STUD IN CONTROL BOX.
3) OPTIONAL WATER LEVEL CONTROL: WIRES 19 & 35 SHOULD BE CAPPED IF NOT USED.
L1= 6
37
34
9
3 12 101
19
4
35
2
V
WATTS
MOD400E
208
240
4960
6600
3&
1&
L3
L1
L2
36
1
MODEL
7
1 10 102
38
3
PROBE
COM
L2= 4
ALTERNATE WATER
LEVEL CONTROL
14.5 9.8 14.5 23.8
17.8 11.3 17.8 27.5
SINGLE PHASE
POWER INPUT
50/60 Hz
SENSOR
PROBE
SENSOR
PROBE
SENSOR
PROBE
SENSOR
PROBE
WATER PAN
PROBE
HEATING ELEMENT
GRN
HEATING ELEMENT
HEATING ELEMENT
HEATING ELEMENT
L1= 3
L3= 4
L2= 1
34 37
12
COMMON MAX
9
11
8
5
6
3
2
6 12 101
9 10
7 102
L3
L1
L2
TEMP CONTROL
(BACK VIEW)
COM
NO
NC
INPUT
LOW WATER CONTROL
TEMP CONTROL
(BACK VIEW)
RELAY
35 19
38
TEMP CONTROL
(BACK VIEW)
RELAY
TEMP CONTROL
(BACK VIEW)
RELAY
RELAY
36
WATER FILL
VALVE
INPUT
INPUT
INPUT
10
7
INPUT
4
1
101
4
5
22
102
S1
1
2
21
M400E & M427E Series
NOTES: WIRING DIAGRAM MOD500E
1) TEMPERATURE AND WATER LEVEL SENSOR WIRES ROUTE
SEPARATELY IN SMALLER CONDUIT.
2) GROUND TO EARTH USING SUPPLIED STUD IN CONTROL BOX.
3) OPTIONAL WATER LEVEL CONTROL: WIRES 19 & 35 SHOULD BE
CAPPED IF NOT USED.
L1= 6
37
MODEL
V
WATTS
3&
1&
PROBE
208
MOD500E 240
6196 14.6 14.6 19.5 29.8
8250 16.9 16.9 22.1 34.4
34
19
3
38
1
50/60 Hz
L2= 4
7 13
1 10 102
35
2
COM
9 15
3 12 101
4
L3
L1
L2
36
ALTERNATE WATER
LEVEL CONTROL
SINGLE PHASE
POWER INPUT
SENSOR
PROBE
SENSOR
PROBE
SENSOR
PROBE
SENSOR
PROBE
SENSOR
PROBE
WATER PAN
PROBE
HEATING ELEMENT
GRN
HEATING ELEMENT
HEATING ELEMENT
HEATING ELEMENT
HEATING ELEMENT
L1=
L3=
L2=
34 37
15
COMMON MAX
12
14
9
11
6
8
5
3
2
6
3
1
9 15 101
7 10 13
4 12 102
L3
L1
L2
COM
NO
NC
LOW WATER CONTROL
INPUT
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
2M-Z14567rev~
TEMP CONTROL
(BACK VIEW)
RELAY
35 19
38
TEMP CONTROL
(BACK VIEW)
RELAY
TEMP CONTROL
(BACK VIEW)
RELAY
TEMP CONTROL
(BACK VIEW)
RELAY
TEMP CONTROL
(BACK VIEW)
RELAY
36
WATER FILL
VALVE
INPUT
13
INPUT
10
INPUT
7
INPUT
4
INPUT
1
101
4
5
22
102
S1
M500E & M527E Series
29
1
2M-Z14523rev~
2
21
WIRING DIAGRAM: MOD200 Thermostat Control Units
WIRING DIAGRAM FOR MOD 200T, 227T WARMER
208/240V, SINGLE PHASE
HEATING ELEMENT (2)
5
6
2
3
PILOT LIGHT (2)
THERMOSTAT (2)
1
4
WIRE CONNECTOR
7
3
6
7
SINGLE
PHASE
WATTS
208
2480
11.9
240
3300
13.8
REV. C
L3
50
HZ
60
1
P/N 2M-40844
L2
4
TERM. BLOCK
M200T & M227T Series
WIRING DIAGRAM FOR MOD 200T WARMER W/AUTO WATER FILL
208/240V, SINGLE & THREE PHASE
HEATING ELEMENT (2)
6
WATER PAN
39
21
L1
1
PILOT LIGHT
GRN
PROBE
51
50
L3
5
6
2
3
4
3
1
L2
35
WIRE
CONNECTOR
MALE/FEMALE
CONNECTOR
4
31
THERMOSTAT
19
SINGLE PHASE
21
39
COMMON
35
INPUT
21
34
19
37
MAX
38
COM
2
31
19
4
PROBE 3
NO
36
L3
3
1
35
38
1
ALTERNATE LOW
WATER CONTROL
L1
6
37
34
L2
4
36
35
LOW WATER CONTROL
TERM. BLOCK
WATER FILL VALVE
THREE PHASE
VOLTS
208
240
L1
L2
L3
6.0
6.9
6.0
6.9
10.3
11.9
SINGLE
PHASE
11.9
13.8
50
60
HZ
M200T-AF & M227T-AF Series
30
REV. F
P/N 2M-48109
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
VOLTS
L1
WIRING DIAGRAM: MOD300 Thermostat Control Units
WIRING DIAGRAM FOR MOD 300T, 327T WARMER
208/240V, SINGLE & THREE PHASE
HEATING ELEMENT (3)
8
9
6
5
3
2
PILOT LIGHT (3)
PILOT LIGHT
PL
3
THERMOSTAT (3)
6
L1
12
9
7
1
4
L3
1
L2
4
TERMINAL
BOARD
7
WIRE CONNECTOR
12
6
SINGLE PHASE
12
9
L1
3
L3
THREE PHASE
VOLTS
SINGLE
PHASE
L1
L2
L3
208
10.3
240
11.9
10.3
11.9
10.3
11.9
7
50
17.9
1
HZ
L2
4
60
20.6
TERM. BLOCK
REV. E
P/N 2M-48589
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
M300T & M327T Series
WIRING DIAGRAM FOR MOD300TDM AND 327TDM W/AUTO WATER FILL
208/240V, SINGLE & THREE PHASE
HEATING ELEMENT (3)
WATER PAN
22
6
33
3
PILOT LIGHT
PROBE
50
L1
THERMOSTAT
GRN
9
51
8
9
7
5
6
4
3
2
31
1
L3
7
MALE/FEMALE
CONNECTOR
L2
35
4
19
22
1
WIRE
CONNECTOR
31
SINGLE PHASE
33
33
9
6
L1
22
3
31
35
COMMON
19
36
37
1
37
34
35
19
4
NO
PROBE 3
COM
ALTERNATE LOW
WATER CONTROL
L2
4
MAX
38
L3
7
34
INPUT
38
VOLTS
35
2
1
36
208
240
LOW WATER CONTROL
THREE PHASE
L1
10.3
11.9
WATER FILL VALVE
M300T-AF & M327T-AF Series
31
L2
L3
10.3
11.9
10.3
11.9
SINGLE
PHASE
17.9
20.6
TERM. BLOCK
50
HZ
60
REV. G
P/N 2M-48110
WIRING DIAGRAM: MOD400 Thermostat Control Units
WIRING DIAGRAM FOR MOD 400T, 427T WARMER
208/240V, SINGLE & THREE PHASE
14
6
HEATING ELEMENT (4)
3
13
11
12
9
8
6
5
L1
12
2
3
9
15
PILOT LIGHT (4)
L3
10
THERMOSTAT (4)
1
10
7
L2
4
1
4
TERMINAL
BOARD
7
SINGLE PHASE
WIRE CONNECTOR
13
14
15
15
12
3
6
13
L1
4
9
14
THREE PHASE
VOLTS
L1
L2
L3
208
14.5
240
17.8
14.5
17.8
9.8
11.3
SINGLE
PHASE
23.8
HZ
1
60
27.5
REV. F
L3
10
50
L2
7
P/N 2M-48599
TERM. BLOCK
M400T & M427T Series
208/240V, SINGLE & THREE PHASE
14
PILOT LIGHT
6
12
11
9
8
6
5
2
3
3
WATER PAN
PROBE
L1
16
12
7
10
GRN
33
15
13
HEATING ELEMENT (4)
9
L3
35
1
4
10
32
L2
1
THERMOSTAT (4)
19
MALE/FEMALE
CONNECTOR
4
16
7
SINGLE PHASE
WIRE
CONNECTOR
14
13
15
3
15
16
12
13
6
TERM. BLOCK
L1
9
14
4
L3
10
1
34
35
INPUT
37
19
37
MAX
38
36
PROBE
34
38
COM
L1
19
4
3
2
1
38
35
36
SINGLE
THREE PHASE
VOLTS
36
NO
LOW WATER CONTROL
L2
7
WATER FILL SOLENOID
COMMON
35
208
14.5
240
17.8
L2
14.5
17.8
L3
PHASE
9.8
23.8
11.3
27.5
REV. C
HZ
60
P/N 2M-303564
ALTERNATE LOW
WATER CONTROL
M400T-AF & M427T-AF Series (Single Control Panel)
32
50
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
WIRING DIAGRAM FOR MOD-400TDM, 427TDM W/AUTO WATER FILL (SINGLE CONTROL PANEL)
WIRING DIAGRAM: MOD400 Thermostat Control Units
WIRING DIAGRAM FOR MOD400TDM & 427TDM WARMER W/AUTO WATER FILL
208/240V, SINGLE & THREE PHASE
HEATING ELEMENT (4)
WATER PAN
PILOT LIGHT
PROBE
GRN
51
50
5
4
6
7
8
9
10
19
MALE/FEMALE
CONNECTOR
WIRE
CONNECTOR
THERMOSTAT
11 12
13
14
THERMOSTAT
15
22
33
28
27
9
22
37
6
19
3 PROBE
2
36
34
L3
COM
L3
32
29
29
12
10
L2
4
1
L1
13
7
4
38
35
28
L1
L2
35
LOW WATER CONTROL
TERM. BLOCK
WATER FILL VALVE
30
30
27
22
15
28
33
28
L1
32
COMMON
L1
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
L3
29
29
7
13
10
L2
35
30
30
SINGLE PHASE
VOLTS
35
19
38
MAX
NO
THREE PHASE
SINGLE
PHASE
L1
L2
L3
208
14.5
14.5
9.8
23.8
240
17.8
17.8
11.3
27.5
4
L2
INPUT
37
6
12
L3
34
9
50
HZ
ALTERNATE LOW
WATER CONTROL
60
SINGLE PHASE
48111 (J)
M400T-AF & M427T-AT Series (Dual Control Panel)
33
36
WIRING DIAGRAM: MOD500 Thermostat Control Units
WIRING DIAGRAM FOR MOD 500T, 527T WARMER
208/240V, SINGLE & THREE PHASE
18 20 15
6
HEATING ELEMENT (5)
3
16
15 14
12
11
8
9
5
6
L1
12
9
2
3
PILOT LIGHT (5)
17
L3
10
THERMOSTAT (5)
1
L2
4
13
10
7
1
4
TERMINAL
BOARD
13
7
SINGLE PHASE
17
WIRE CONNECTOR
20
18
16
16
18
6
9
15
L1
3
7
10
THREE PHASE
VOLTS
L1
208
14.6
240
16.9
SINGLE
PHASE
L2
L3
14.6
16.9
19.5
29.8
22.1
34.4
L3
13
20
50
1
HZ
60
L2
4
TERM. BLOCK
12
REV. D
P/N 2M-48604
17
WIRING DIAGRAM FOR MOD-500TDM, 527TDM W/AUTO WATER FILL (SINGLE CONTROL PANEL)
208/240V, SINGLE & THREE PHASE
16
12
6
9
17
20
HEATING
ELEMENT
PILOT LIGHT
15 14
12 11
13
9
10
8
6
7
5
3
1
L1
3
L3
13
10
1
4
7
L2
2
4
18 15
21
35
THERMOSTAT
16
19
20
18
17
SINGLE PHASE
21
21
16
18
WIRE
CONNECTOR
6
TERM. BLOCK
9
15
L1
3
35
19
COMMON
INPUT
10
34
37
20
1
NO
4
12
17
35
ALTERNATE LOW
WATER CONTROL
LOW WATER CONTROL
37
34
4
PROBE 3
COM
2
1
GRN
51
50
L3
13
MAX
38
36
7
19
VOLTS
38
208
240
35
36
MALE/FEMALE
CONNECTORS
THREE PHASE
L1
L2
L3
19.5 14.6
14.6
22.1 16.9
16.9
SINGLE
PHASE
29.8
34.4
50
60
HZ
REV. B
WATER FILL SOLENOID
WATER PAN
PROBE
M500T-AF & M527T-AF Series (Single Control Panel)
34
P/N 2M-303567
L2
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
M500T & M527T Series
WIRING DIAGRAM: MOD500 Thermostat Control Units
WIRING DIAGRAM FOR MOD 500TDM AND 527TDM WARMER W/AUTO WATER FILL
208/240V, SINGLE & THREE PHASE
HEATING ELEMENT (5)
PILOT LIGHT
14
15
13
12
11
10
9
8
7
6
5
4
3
2
1
THERMOSTAT
WIRE CONNECTOR
35
20
SINGLE PHASE
27
L3
13
L2
12
30
LOW WATER CONTROL
31
L3
WATER FILL VALVE
33
6
28
MALE/FEMALE
CONNECTOR
20
3
THREE PHASE
208
240
38
35
37
TERM. BLOCK
VOLTS
36
1
34
4
35
30
12
2
COM
1
L2
19
4
PROBE 3
3
29
32
L2
ALTERNATE LOW
WATER CONTROL
6
10
NO
9
7
29
L3
29
30
36
33
L1
13
15
32
28
L1
L1
L1
L2
L3
19.5
22.1
14.6
16.9
14.6
16.9
SINGLE
PHASE
29.8
34.4
51
L1
9
60
50
PROBE
GRN
31
50
HZ
29
L3
SINGLE PHASE
WATER PAN
2M-48112 (H)
7
30
L2
35
4
34
37
MAX
38
20
10
28
27
28
15
COMMON
INPUT
19
19
1
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
M500T-AF & M527T-AT Series (Dual Control Panel)
35
PARTS & SERVICE
DESCRIPTION
PART NO.
ADAPTERS & INSETS
ADAPTER TOP, convert 12” x 20” warmer to
hold two 7 qt. insets
WS-21502
ADAPTER TOP, convert 12” x 20” warmer to
hold two 4 qt. and two 2½ qt
DD-21503
ADAPTER TOP, convert 12” x 20” warmer to
hold three 4 qt. insets
DD-21616
ADAPTER TOP, convert 12” x 20” warmer to
hold one 7qt. and one 4 qt.
DD-21618
ADAPTER TOP, convert 12” x 20” warmer to
hold four 2½ qt. insets
WS-21623
ADAPTER TOP, convert 12” x 27” SMPT-27
to hold three 7 qt. insets
DD-21503
4 QT. ROUND INSET w/ lid
WS-20774
7 QT. ROUND INSET w/ lid
WS-20587
11 QT. ROUND INSET w/ lid
WS-20908
11 QT. ROUND INSET w/ hinged lid
WS-21057
36
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
Always use an inset.
DO NOT place food directly
into the warmer pan.
PARTS & SERVICE
DESCRIPTION
PART NO.
ACCESSORIES
WELLSLOK EXTENSION KIT, for UL LISTED
circular warmers only, adapt to wood counter
up to 1¾” thick
WS-22592*
WELLSLOK EXTENSION KIT, for UL LISTED
12” x 20” warmers only, adapt to wood counter
up to 1¾” thick
WS-22593*
For factory authorized service,
or to order factory authorized
replacement parts, contact
your Wells authorized service
agency, or call:
Wells Bloomfield, LLC
10 Sunnen Dr.
St. Louis MO 63143 USA
*Wellslok Extension Kits for UL Listed units approved for
installation in wood counter tops
One well units require one kit / Two and three well units require
two kits / four and five well units require three kits
M011C.02 2M-Z16298 Owners Manual for Built-In Well Modular Warmers
IMPORTANT: Use only factory
authorized service parts and
replacement filters.
DRAIN VALVE EXTENSION KIT, extension from
drain to counter front with remote handle, for use
with “D” models only, excluding “DM” models
WS-20385
DRAIN SCREEN
P2-31869
OPTIONAL 72” WIRING, thermostatically controlled warmers**
** contact factory customer service for availability
Service Dept.
phone: (314) 678-6314
fax:
(314) 781-2714
Service Parts Department
can supply you with the name
and telephone number of
the WELLS AUTHORIZED
SERVICE AGENCY nearest
you.
CUSTOMER SERVICE DATA
please have this information available if calling for service
RESTAURANT _____________________________ LOCATION _____________
INSTALLATION DATE ________________________ TECHNICIAN ___________
SERVICE COMPANY ________________________________________________
ADDRESS ___________________________ STATE ______ ZIP__________
TELEPHONE NUMBER (_____)_____-_________
EQUIPMENT MODEL NO. _______________
EQUIPMENT SERIAL NO. _______________
VOLTAGE: (check one)
120
208
37
240
WELLS BLOOMFIELD, LLC
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomfield.com
Download PDF
Similar pages