dolphin recessed waste bin – bespoke finish

Model shown 09.3006.2
09.3006
DOLPHIN RECESSED WASTE BIN – BESPOKE FINISH
› Recessed, satin stainless steel, waste paper bin with removable 10 litre
capacity bin and stainless steel back box.
WIDTH
375
MM
HEIGHT
680
MM
16
MM
PROJECTION
› Usage: Low Traffic Areas
› Satin stainless steel finish
› Available with glass, acrylic or corian fascias
SPE CIFICAT ION
Recess mounted waste paper bin. Model number 09.________ with flush
mounted lock, vertically brushed satin finish stainless steel door, waste chute
and stainless steel back box and bin. Manufactured by Dolphin Solutions Ltd.
09.3006
09.3006.1
09.3006.3
PRODUCT CODES
› Stainless steel
09.3006
› Toughened glass
09.3006.1
› Coloured acrylic
09.3006.2
› Coloured corian
09.3006.3
› Surface mounted
09.3406
TECHNIC AL HELPLINE
0 1 4 24 202224
D O L P H I N S O L U T I O N S . C O. U K
MAT E RIAL
CARE AN D M AIN TE N AN CE
› Door: 1.2mm satin finish stainless steel grade 1.4301 (304) to BS
EN 10088-1
› Clean with soap and warm water, dry with a clean soft cloth.
› Bin chute: 0.7mm satin finish stainless steel grade 1.4301 (304) to
BS EN 10088-1
› To maintain finish use any industrial steel cleaner, polishing along
the material grain with a clean soft cloth.
› Bin: 0.7mm stainless steel grade 1.4301 (304) to BS EN 10088-1
› Dolphin Solutions Ltd recommends “Steel Clean” cleaning agent,
obtainable from: Vitopan (Tel: 01204 863000)
› Back box: 0.9mm stainless steel grade 1.4301 (304) to BS EN
10088-1
› Never Use Corrosives - such as bleach or other cleaning products
containing hypochlorite;
› Approximate unit weight: 9.8kg
› Any form of acid solution or industrial cleaning solution;
Bathroom cleaning products, developer liquids, concentrated
disinfectants, strong alkalis or caustic soda;
CAPACIT Y
Standard: 10 litres
› Never Use Abrasives - such as wire wool; scouring pads;
› Caution - Never use dirty or grit contaminated cleaning sponges
or cloths
OPE RAT ION
› The bin can be accessed opening door with key supplied.
WARRAN TY
› Emptying of bin: Open door, slide bin forward and remove from
guide rails, fit suitable bin liner. Push bin back over slide rails into
back box void and shut door.
This product is covered by a 12-month warranty from the date of
purchase to be free from defects if installed and maintained in
accordance with these instructions. Dolphin Solutions will replace or
repair (as appropriate) free of charge any product with a proven
manufacturing defect if reported within the warranty period.
IN STALLAT ION
› Recommended wall opening of 360w x 665h x 112d
› Recommended mounting height from underside of unit to FFL
315mm (Male Toilet).
Dolphin Solutions Ltd reserves the right to amend the design or
dimensions without formal notice.
› Open door with key provided
› Position the unit into the prepared wall recess allowing a 6mm
clearance all round for packing and adjustment
› Fit temporary screws into the rectangular slots on the side walls
(Do not over tighten, to allow for horizontal adjustment)
› Fix casing to studwork using suitable screws (Fixing holes
Ø6.5mm) and remove temporary screws from slots
› Lock front cover
TECHNIC AL HELPLINE
0 1 4 24 202224
D O L P H I N S O L U T I O N S . C O. U K
Download PDF
Similar pages