commercial shower systems

COMMERCIAL SHOWER SYSTEMS
2.5 GPF SHOWER SYSTEM KIT
WITH HAND SHOWER & DIVERTER TUB SPOUT
MODEL NUMBER:
1662.225 Commercial Shower System Kit
Includes:
• Shower Valve with SS
• Colony Soft Valve Only Trim
• Fixed Hand Shower - 2.5 GPM
• In-Line Vacuum Breaker
• Metal Hose
• Wall Supply
• 36" Slide Bar
• Slip-On Diverter Tub Spout
GENERAL DESCRIPTION:
PRODUCT FEATURES:
Complete commercial shower system includes: an
R120SS pressure balance valve and trim, a wall supply
with 1/2" NPT female inlet and 1/2" NPSM male outlet, a
59" (1500mm) metal shower hose, vacuum breaker, a
“Fixed” personal shower, slip on diverter tub spout and a
36" Slide Bar.
Valve features a cast brass body, washerless 47mm ceramic
disc valve cartridge with volume and temperature control,
back-to-back capability, integrated check valves and hot limit
safety stop. Pressure balancing cartridge maintains constant
output temperature in response to changes in relative hot
and cold supply pressure. One-half inch direct sweat inlets
and outlets. With screwdriver stops. Rough-in plaster guard
designed for use as thin-wall mounting adapter. Durable
metal handle. Fixed hand shower with 2.5gpm/9.5L/min. flow
restrictor. Slide bar features an adjustable shower holder
which can be set at any height or position along the bar and
angle up to 45˚.
FLOW RATE
GALLONS PER MINUTE
VALVE:
Cast Brass Valve Body: Durable.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows
temperature and volume.
control
over
water
Pressure Balancing Valve Cartridge: Maintains
constant output temperature in response to changes in hot
and cold supply pressure. Diaphragm system with
integrated check valves engineered to eliminate cross flow.
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount
of hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Integral Plaster Guard and Mounting Plate:
Hand
Shower
3
R120SS
T675.500.002
1660.505.002
1660.400.002
8888.035.002
8888.037.002
1660.236.002
8888.026
Protects valve during installation and serves as a mounting
plate for thin-wall installations.
PERSONAL SHOWER:
Lightweight, Ergonomic Design:
2
For a sure grip
even with wet, soapy hands.
1
0
SLIDE BAR:
Simple Height Adjustment: Allows positioning of the
20
40
60
80
personal shower anywhere along the bar.
100
INLET PRESSURE (PSI)
SUGGESTED SPECIFICATION:
Shower system shall feature a wall supply with 1/2" NPT female inlets and 1/2" NPSM male outlet, 59" metal hose, vacuum
breaker, 2.5 gpm/9.5L/min. personal shower, slip-on diverter tub spout and a 36" Slide Bar. Pressure Balance valve shall
feature a cast brass body. Shall feature ceramic disc valve cartridge which controls water temperature and volume. Shall also
feature hot limit safety stop. Fitting shall be American Standard Model # 1662.225.002.
© 2013 AS America Inc.
L335
Revised 2/14
COMMERCIAL SHOWER SYSTEMS
2.5 GPF SHOWER SYSTEM KIT
WITH HAND SHOWER & DIVERTER TUB SPOUT
CODES AND STANDARDS
Install as required to comply with local code
requirements.
ASME A112.18.1
ASSE 1016
CSA B 125
Finish
Product
Number
1662.225
Polished
Chrome
Description
002
Commercial Shower System Kit. Contains pressure balance valve with volume and temperature control,
trim kit, “Fixed” hand shower, metal hose, vacuum breaker, wall supply, slip-on diverter tub spout
and 36" slide bar. 2.5gpm/9.5L/min.
Available Modification:
Part Suffix
_SG
Description
Commercial Shower System with 36" Slide-Grab Bar (1662.236) instead of 36" Slide Bar (1660.236)
"SEE ILLUSTRATION BELOW"
6"
(153mm)
SWEAT INLETS
w/STOPS
(R120SS)
149mm
(5-7/8")
3"
(76mm)
1/2 NOM.
COPPER
SWEAT ALL
CONNECTIONS
6-3/4"
(171mm)
13mm (1/2")
130mm
(5-1/8")
REF.
32mm(1-1/4")
DIA HOLE
1829mm (72")
to 1990mm (78")
(OPTIONAL)
TO FINISHED
FLOOR
146mm
(5-3/4")
103mm
(4-1/16")
1/2" NPSM
65mm
(2-1/2")
32mm
(1-1/4")
INLET:
1/2" NPT
1/2" COPPER
67mm
(2-5/8")
51mm
(2")
127mm
(5")
82mm
(3-1/4")
45mm
(1-3/4")
53mm
(2-1/16")
OUTLET:
1/2" NPSM HOSE
CONNECTION
RUBBER GASKET
FINISHED WALL
849mm
(33-3/8")
900mm
(35-3/8")
24mm
(1")
86mm
(3-3/8")
© 2013 AS America Inc.
L336
Revised 2/14
Download PDF
Similar pages