New Products - Industrial Solutions and Innovation, LLC

New Products
2014/2015
Blue Evolution®
3
Years
5
Years
transformer
and rectifier
ewm-warranty
24 hours | 7 days
/// Perfection is the Principle
BlueEvolution® – the major sustainability initiative from ewm.
/// simply more
EWM AG / www.ewm-group.com
Welding machines
TIG-DC
TETRIX 200 puls, TETRIX 300 puls
TIG
m
ax
.1
00
m
MMA
Perfect TIG and MMA welding
Experience undreamed-of TIG welding properties — due to a new innovative power unit,
the novelties Tetrix 200 puls and Tetrix 300 puls enable MMA pulse welding in addition
to longer duty cycles, much improved ignition and welding properties and a higher open
circuit voltage.
They convince with their low weight, compact design and the option to connect to up to
100 m of mains cable both a the construction site and in the workshop.
Your benefits
// Mains cable up to 100 m
Tetrix 200 puls
portable, gas-cooled
Mains voltage: 1 x 230 V (-40 % - +15 %)
Mains fuses: 1 x 16 A
Open circuit voltage:63 V
Setting range: 5 A - 200 A
Duty cycle 40 °C: 200 A / 25 %
150 A / 60 %
120 A / 100 %
cos φ:
0,99
Efficiency:
86%
2
/// www.ewm-group.com
// 100 % generator compatibility
// High mains voltage tolerances
Tetrix 300 puls
modular: portable, gas-cooled
Mains voltage: 3 x 400 V (-25 % - +20 %)
Mains fuses: 3 x 16 A
Open circuit voltage:63 V
Setting range: 5 A - 300 A
Duty cycle 40 °C: 300 A / 25 %
260 A / 60 %
210 A / 100 %
cos φ: 0,99
Efficiency:
88 %
Tetrix 300 puls / cool40 U31 / Trolly 35.2-2
modular: mobile, water-cooled
Cooling capacity 1 l/min:
max. flow rate: max. output pressure:
tank capacity: 900 W
5l/min
3,5 bar
4l
Your benefits
Vertical-up weld PF
Vertical-down wld PG
MMA pulsing
// Especially suitable for root welding
// Reliable vertical down welding
// Perfect electrode vertical-up welding
// Fine-flaked weld surface with a TIG look for final
passes
// Less finishing work thanks to less spatter
// Ideal for difficult electrodes
// Outstanding gap bridging with no sagging of the
root side
// Less distortion thanks to controlled heat input
Smart
// Very simple to operate – just switch on and start
welding
// One-knob operation and clear, self-explanatory
operating panel
// TIG and MMA
// Spotmatic – saves 50% of tacking time
// TIG automated pulsing
// MMA pulsing
// activArc – precise, focussed arc with reduced heat
transfer and deep fusion penetration for optimum root fusion
// Connection capability: remote control, up/down
torch
Comfort
// Proven convenience – all welding parameters can be adjusted
// Reproducible setting of all welding parameters by means of digital display
// TIG and MMA
// activArc – precise, focussed arc with reduced heat transfer and deep fusion penetration for optimum root fusion
// Pulsed TIG welding in Hz and kHz ranges
// MMA pulsing
// Spotmatic – saves 50% of tacking time
// Connection capability: remote control, up/
down and Retox torches
// Also ideal for mechanised and automated
applications
EWM AG /// www.ewm-group.com
3
Automation solutions
frontDrive – the safe alternative to push-pull
MIG/MAG automation
The new robot welding torch for
your automated application
As there is no „push“, you have no downtimes and no synchronisation problems compared to conventional push-pull
welding torch systems.
The ewm frontDrive can be used with all conventional robotic
systems and can thus be easily integrated into your production process.
Your benefits
// Suitable for all MIG/MAG processes:
// Excellently suitable for soft wires, // Trouble-free and reliable worMIG/MAG, MIG brazing, pulse, forceArc //
thin sheet and steel processing
king due to 4 driven rollers in
forceArc puls, coldArc // coldArc puls, root
the wire feeder
Arc // root Arc puls
Assembled system
4
/// www.ewm-group.com
Your benefits
Benefits over push-pull
// Drive near the welding process
// Maximum TCP security
// Wire is fed or pulled from one place
// No synchronisation problems
// Less wear parts required
Prepared for the future
// Excellently suitable for soft wires
// Excellently suitable for thin sheet processing and
steel
// Increased productivity
Components
// 4 drive rolls
// Colour-marked wire feed rolls
// Transparent polycarbonate hood
// Bayonet catch for hose package and torch neck
Wire inching forward
Wire inching reverse
User-friendly handling
// 3 push-buttons: Wire inching forward and reverse and gas test
// Toolless roll exchange
// Roll pressure adjustable in five locking stages
without tool
// Bayonet catch for hose package and torch neck
// Reproducible contact pressure
Gas test
EWM AG /// www.ewm-group.com
5
Automation solutions
System example
2
1
5
4
3
1
frontDrive welding torch system
// Completely equipped frontDrive system
2
// frontDrive media box
// Tool-free connection of all cables
// Gas valve
// Optional gas monitoring
3
5
Industrial bus interface, BUSINTX 11
// Industrial bus interface for integration into
production/robotic applications
Operating panel
4
alphaQ 352 MM RC power source
// Multiprocess MIG/MAG pulse welding machine, MULTIMATRIX technology, without front
control
// Operating panel for setting welding parameters for RC welding power sources without
front control
ewm frontDrive performance data
// Processes: MIG/MAG, MIG brazing, pulse, forceArc // forceArc puls, coldArc // coldArc puls, rootArc // rootArc
puls
// Welding consumables: Un- and low-alloy steels, high-alloy steels, low-alloy steels and copper alloys, nickel-base
alloys, fluxed cored wires
// Wire diameter: 0.8–1.6 mm
// Maximum output: 420 A at 60% duty cycle/40 °C, gas cooled
6
/// www.ewm-group.com
Welding torch system layout
Torch neck including consumables
// Quick-change system for torch neck and hose
package
Drive
// Bayonet catch
// Reliable wire feeding due to 4-roll drive
// Drive near the welding process
// Roller pressure adjustable in five locking
stages without tool
// Direct view of the wire feed rolls
// Colour-marked rolls
// Exchangeable centre guide
Hose package with powerConnector connection
// Especially reliable current transfer due to
powerConnector
// Bayonet catch
// frontDrive media box
// Tool-free connection of all cables
// Gas valve
// Optional gas monitoring
// Collision sensor
// Robust structure
// High precision
EWM AG /// www.ewm-group.com
7
Welding torches
Special welding torches tailored to your application
MIG/MAG
TIG
Plasma
We build the welding torch to match your
application
In addition to our in-house series production of MIG/MAG welding torches, we build the welding torch for your application. In this way, we guarantee you the optimal component for your welding task – for manual
and automated welding.
Your benefits
// Special torches – Welding torches
tailored to your application
// Own consumables guarantee long
service life and best integration into the
welding system
Welding inside pipes with extra long torch neck and small bend radius
8
/// www.ewm-group.com
Your benefits
Task:
// Welding inside steel structures
ewm solution:
// Torch neck based on MT551W with a length of
1,500 mm
Customer benefit
// Welding location well accessible
// Improved visibility of the seam
// Reduced costs due to use of standard MT replacement parts
Task:
// Reduced downtimes during automated welding
of steel structures
ewm solution:
// Welding torch with water cooled gas nozzle and
exchangeable gas nozzle tip
Customer benefit
// The targeted cooling of the gas nozzle enables a
duty cycle of 650 A/100%
// High cost savings due to separate exchange of
the gas nozzle tip
// Other consumables are standard MT
consumables
Task:
// Space-saving welding torch for use at longitudinal carriages and orbital welding installations
ewm solution:
// Automated welding torch based on AMT551W
with a total length of just 61 mm
Customer benefit
// More compact design of the longitudinal
carriages
// Orbital welding installations require less space to
go round the pipe.
// Reduced costs due to use of standard MT
consumables
EWM AG /// www.ewm-group.com
9
forceTig
Completely new possibilities of TIG welding
forceTig standard
forceTig cold wire
forceTig hot wire
forceTig®
/// patented *
TIG joining process with an especially focused arc for greater
penetration and faster welding speeds – now also available
in conjunction with tigSpeed drive 4 rob
EWM‘s new, patented* forceTig® welding process takes TIG welding to places that could not
previously have been imagined. This joining process enables a much higher energy density in
the weld pool by way of an extremely concentrated welding arc and makes possible the fastest
welding speeds.
Power sources capable of delivering up to 500 A and1000 A are available for welding greater
panel thicknesses
Compared to conventional methods such as automated TIG welding or plasma keyhole welding,
the ewm forceTig offers you a large number of advantages and improvements.
Your benefits
// Higher welding speed
// Increased efficiency, less
non-productive time
// Less energy per unit length due to
the highly focussed TIG arc with high
energy density
Three possible operating modes
forceTig
* EP 2 008 750 B1
10
/// www.ewm-group.com
forceTig cold wire
forceTig hot wire
Your benefits
Comparison of standard TIG arc with forceTig
Advantages over standard TIG
// Much better focused arc
// Deeper penetration
// 100% reproducible TCP, perfect for automated
applications
// Electrode easy to change without gauges
thanks to defined, calibrated geometry
// Very high current-carrying capacity, high current density
// Stable welding torch design for increased
crash safety
Standard TIG arc
forceTig
Advantages over plasma keyhole
Comparison of plasma keyhole with forceTig
// Substantially higher welding speed at greater
material thickness
// Long duty cycles of the welding torch (up to
800 A/100%)
// Easier to adjust – same as with TIG welding
// Short training times due to very simple
operation
// Very low maintenance costs due to reduction
to a few, robust consumables
Plasma keyhole
forceTig
forceTig welding torch
// High torch power :
// FT 1000: 800 A at 100 % DC
// FT 500: 500 A at 100 % DC
// Electrode easy to change without gauges
// Stable welding torch design for increased crash
safety
// Closed, highly effective cooling circuit
// Optionally with or without cold or hot wire feed
FT 500:
500 A / 100 %
// FT 500 ideal in confined spaces thanks to its
small size
FT 1000:
800 A / 100 %
// FT 1000 ideal for great wall thicknesses thanks to
high performance
EWM AG /// www.ewm-group.com
11
TIG hot and cold wire welding
Dynamic wire feed system
tigSpeed drive 45 / tigSpeed drive 4 Rob
TIG welding
TIG cold wire welding
TIG hot wire welding
tigSpeed
increases deposition rates, welding speeds and
quality
The continuous wire feeding is superimposed by a forward/backward motion of the
wire. The welding process is particularly stable and offers a high deposition rate at the
same time.
The tigSpeed systems are available as cold wire and hot wire versions for manual and
automated operation.
// Up to 100% faster in comparison to manual TIG welding
// Less fatigue thanks to
easier handling and more
comfortable working
positions
// Perfect weld, no spatters
Your benefits
tigSpeed: forward/backward motion of the wire
cold / hot wire
tigSpeed: forward/backward motion of the wire
Up to 60% higher deposition rates*
Ideal for positional welding
Perfectly controllable weld pool through superimposed
forward/ backward motion of the wire
Better seam quality*
thanks to significantly reduced dilution when surfacing
Less fatigue *
thanks to easier handling and more comfortable working positions
12
/// www.ewm-group.com
*compared to manual TIG welding
Optimum seam appearance with shapeable ripples
thanks to infinitely adjustable frequency of the forward/
backward motion of the wire
Reliable welding of root passes
with high welding speed
Your benefits
Manual application
// tigSpeed drive 45
// For connecting to standard TIG power sources
(prepared for cold / hot wire)
// Set and view all parameters at tigSpeed drive
45
// Set parameters via remote control
Remote control RTG U/D
// cold / hot wire
// Adjustable heat input in the wire from 40 A
to 180 A
Choice of 3 torches
// TIG 200G CW HFL:
Gas cooled TIG welding torch, cold wire,
up/down, 270° rotatable and replaceable wire feed
// TIG 450W CW/HW HFL:
Water cooled TIG welding torch, cold/
hot wire, up/down, 270° rotatable and
replaceable wire feed
TIG 200G CW HFL:
200 A / 35 % (DC)
140 A / 35 % (AC)
TIG 450W CW/HW HFL:
400 A / 100 % (DC)
280 A / 100 % (AC)
comfyTig 18-1 CW/HW:
290 A / 100 % (DC)
190 A / 100 % (AC)
// comfyTig 18-1 CW/HW:
Water-cooled TIG cold / hot wire torch in
MIG/MAG torch casing
Mechanised and automated applications
// tigSpeed drive 4 Rob
// Setting and display of all parameters via
BUSINTX 11
// cold / hot wire
// Adjustable heat input in the wire from 40 A
to 180 A
// For connection to tigSpeed 353 Synergic RC
cold wire and tigSpeed 352 Synergic RC hot
wire power sources
// Optionally available as tigSpeed plasma power source 352
TIG-MT 200G
200 A / 60 % (DC)
140 A / 60 % (AC)
TIG-MT 300 W
300 A / 100 % (DC)
210 A / 100 % (AC)
TIG-MT 500 W
500 A / 100 % (DC)
350 A / 100 % (AC)
EWM automated welding torches
// Automated TIG welding torch with cold /
hot wire support
// 4 axes support
// Available for Tetrix drive, tigSpeed and
tigSpeed drive 4 Rob available
// TIG-MT 200G, TIG-MT 300W, TIG-MT
500W
EWM AG /// www.ewm-group.com
13
TIG torches
New TIG welding products
TIG welding
comfyTig 18-1 CW/
HW
TIG 450W CW/HW
TIG-SR 300 GD HD
TIG welding made easy
Our new TIG welding torch products convince in particular with improved handling of cold and
hot wire welding, great robustness and long duty cycles.
In addition to a world first in the field of TIG welding, our comfyTig CW/HW, we offer you a
large variety of variants of cold and hot wire torches.
There are new things to discover also in the field of manual welding: For instance, you can
now without a problem weld with up to 300 A with gas cooling – with our TIG-SR 300 GD HD
Your benefits
TIG 200G CW // TIG 450W CW/HW
comfyTig 18-1 CW/HW
TIG-SR 300 GD HD
// TIG welding torch, cold / hot
wire, rotating support
// C
old / hot wire torch in MIG/
MAG torch casing
// Ergonomic GRIP handle for a
secure grip
// Three fixed or flexible wire
feed angles
// Three fixed or flexible wire feed
angles
// Easy changeover from MIG/
MAG to TIG welding
// G
as cooled TIG welding torch with
high power:
300 A/ 35%
// TIG-SR 300F GD HD:
Optimal ergonomics in all welding
positions
// Flexible use due to different gas
nozzle forms such as Jumbo
and torch neck gas nozzle
// Flexible use due to different
gas nozzle forms such as
Jumbo and torch neck gas
nozzle
// EWM TIG series:
// Components streamlined to three
consumables
// Easier adjustment of tungsten needle
// Simpler, quicker change of consumables
// No copies, so optimum quality assured
14
/// www.ewm-group.com
// Flexible use due to different gas
nozzle forms such as Jumbo and
torch neck gas nozzle
// Compatible with SR consumables
// EWM TIG-SR series:
// Based on the ‚SR‘ standard available
worldwide
// High power, gas cooled up to 300 A
Your benefits
TIG-SR 300F GD HD:
300 A / 35 % (DC)
250 A / 35 % (AC)
TIG-SR 300 GD HD:
300 A / 35 % (DC)
250 A / 35 % (AC)
TIG torch with very high power
// Gas cooled TIG torch
// Heavy Duty: 300 A
// Compatible with SR consumables
// TIG-SR 300F GD HD:
// Optimal ergonomics in all welding
positions
// Improved accessibility
TIG 450W CW/HW
400 A / 100 % (DC)
280 A / 100 % (AC)
TIG 200G CW
200 A / 35 % (DC)
140 A / 35 % (AC)
TIG welding torch with a separate
cold / hot wire feed
X
// Optionally gas (TIG 200 CW) or water-cooled (TIG
450 CW/HW)
// Up/Down: Setting of welding current and
programs
View X
// 270° rotatable and replaceable wire feed
// Three fixed wire feed angles: 30°, 39°, and 41°
// Flexible wire feed angle of 15°-41°
30°, 39°, 42°
// Various gas nozzle forms
// Highly flexible hose package with 1 m leather
protector
// Ergonomic GRIP handle for a secure grip
Support
flex 15° - 41°
wire feed angle
Cold / hot wire torch in MIG/MAG
torch casing
comfyTig 18-1 CW/HW
290 A / 100 % (DC)
190 A / 100 % (AC)
// TIG welding torch with a separate cold / hot wire
feed
// Three fixed wire feed angles: 30°, 39°, and 41°
// Flexible wire feed angle of 15°-41°
// Improved handling thanks to MIG/MAG torch grip
// Almost no adjustment needed when changing
from MIG/MAG to cold or hot wire welding
30°, 39°, 42°
// Various gas nozzle forms
flex 15° - 41°
wire feed angle
EWM AG /// www.ewm-group.com
15
Degaussing
Degaussing prior to welding
Degaussing
Degauss 600
Magnetism is not desired where steel is welded. Undesired residual magnetism in steel
parts results in an unstable and deflected arc. The effect may be so great that welding is
impossible.
When using the Degauss 600, you can degauss your materials and workpieces. Following the easy installation of the components at the workpiece, the continuous degaussing
process will automatically be completed within the shortest possible time.
The effect of the degaussing will show immediately in the subsequent welding process.
Your welding results speak for themselves: The arc is stable and no longer deflected, there
are no unnecessary ignition spots, sidewalls are fused without lack of fusion, perfect results without rework or scrap are achieved.
Your benefits
// Degaussing of magnetic materials and workpieces
16
/// www.ewm-group.com
// Single button operation –
automatic degaussing
// Stable welding process without
magnetic deflection – perfect
welding result without finishing
work
Your benefits
Degaussing of pipes and metal sheets
User’s advantages
// No deflection of the arc by residual magnetism in
the workpiece
// Avoidance of lack of fusion due to insufficient
sidewall fusion
// Minimisation of finishing work
// Cost-efficient and high-quality results
// Degaussing of pipes and metal sheets
Very straightforward handling
// The set includes all components required for
degaussing
// Quick connection at the pipe by means of three
load cables
// Single button operation
// Automatic degaussing process
// Use at -25 °C to +40 °C with mains voltage tolerances of +/-20%
// Portable and robust
Degauss 600
// Compact degaussing power source suitable for use
at the construction site
// Single button operation
// Automatic degaussing process
EWM AG /// www.ewm-group.com
17
MMA / Degaussing
Degaussing and welding with only one machine
Degaussing
Pico 350 cel puls pws dgs
MMA
Resistant against cold, heat, rain or dirt, enormously rugged for the toughest usage and, thanks to low weight, ideal for changing deployment locations!
MAG CC-CV
100% safe for vertical-down welding of CEL electrodes
WIG (Liftarc)
MAG welding with Pico drive 4L wire feed unit
Degaussing of pipes and metal sheets
Especially durable
Highly practical
// Production-standard control
panel protective cover
// Rugged carrying handle with
shoulder strap
// Production-standard mains
cable bracket
Degaussing
// Automatic degaussing function to
eliminate residual magnetism in
pipes and sheets
IP 34s protection
// All-round protection
against splash water
Polarity-reversing device
// Integrated as standard equipment
(PWS version)
Best protection
For tough jobs
// Protection against the ingress
of foreign objects
// Secure penetration depth when
placed in accumulated water
// Insertable protective dust filter
(optional)
// Especially solidly-designed base
Pico 350 cel puls pws dgs
Mains voltage: 3 x 400 V (-25 % - +20 %)
Mains fuses:
3 x 16 A
Open circuit voltage:95 V
Setting range: 10 A - 350 A
Duty cycle 40 °C: 350 A / 35 %
280 A / 60 %
230 A / 100 %
cos φ: 0,99
Efficiency:
88%
+
/// www.ewm-group.com
oder
D 300
Pico 350 cel puls pws dgs
with E 1.03 control unit
(MMA Pro PWS)
Selectable polarity
18
D 200
Pico drive 4L or Pico drive 200 C
Versatile usage thanks to MAG CC-CV for
MAG welding and self-shielding for flux
cored wire
D 200
Your benefits
Built for the most extreme demands
// Inspected protection against splash water (IP 34s)
// Ruggedly-designed base enables placement in
dirty and wet environments
// No ingress of accumulated water
// Durability because of replaceable filters
// 3-year guarantee, without any performance
restrictions, also for 3-shift, 24-hour/7-day
operations
// 5-year guarantee for transformer and rectifier
Maximum functionality – easiest
operation
// Polarity can be reversed by pressing a button (PRS)
// Energy efficient due to standby mode
// Automatic degaussing process
// Easiest operation, also for novices, thanks to selfexplanatory, clearly-arranged user interface
Vertical-down weld
Very easy vertical-up and vertical-down
welds
// 100% reliable vertical down welding
// Perfect electrode vertical-up welding through PF
pulse function
// Pulsing (MMA pulsing)
// Automated pulsing
For all climatic zones
// Temperature range of operating machines:
-25 °C to +40 °C
// Temperature range for transport and storage:
-30 °C to +70 °C100 %
// 100% generator compatibility
ax
.
20
0
m
// High mains voltage tolerances (-25% to +20%)
m
Vertical-up weld
EWM AG /// www.ewm-group.com
19
Options
Work made easy with our new options
ON HS XX1
Securely transports long intermediate hose packages of up to 30 m
With our new hose package holder long hose packages can be securely stored on the
machine.
// For holding hose packages of
up to 30 m
// Can be used with every mobile,
non-modular ewm machine
(XX1 casing)
ON HS XX1
ON TC 55
Tools and wear parts always to hand
With our new ON TC 55 tool box you do not need to search for tools any longer
// Tool box can be mounted to Trolley 55
// All tools and wear parts to hand
// For use with gas-cooled, modular machines
// Easy mounting to trolley
ON TC 55
20
/// www.ewm-group.com
Notes
EWM AG /// www.ewm-group.com
21
Notes
22
/// www.ewm-group.com
Headquarters
Technology centre
EWM AG
Dr. Günter-Henle-Straße 8
56271 Mündersbach · Germany
Tel: +49 2680 181-0 · Fax: -244
www.ewm-group.com · info@ewm-group.com
EWM AG
Forststraße 7-13
56271 Mündersbach · Germany
Tel: +49 2680 181-0 · Fax: -144
www.ewm-group.com · info@ewm-group.com
Production, Sales and Service
EWM AG
Dr. Günter-Henle-Straße 8
56271 Mündersbach · Germany
Tel: +49 2680 181-0 · Fax: -244
www.ewm-group.com · info@ewm-group.com
TEAMWELDER s.r.o.
Tř. 9. května 718 / 31
407 53 Jiříkov · Czech Republic
Tel.: +420 412 358-551 · Fax: -504
www.teamwelder.eu · info@teamwelder.eu
EWM HIGH TECHNOLOGY (Kunshan) Ltd.
10 Yuanshan Road, Kunshan · New & Hi-tech Industry Development Zone
Kunshan City · Jiangsu · Post code 215300 · People´s Republic of China
Tel: +86 512 57867-188 · Fax: -182
www.ewm.cn · info@ewm.cn · info@ewm-group.cn
Sales and Service Germany
EWM AG
Sales and Logistics Centre
Sälzerstraße 20a
56235 Ransbach-Baumbach · Tel: +49 2623 9276-0 · Fax: -244
www.ewm-ransbach-baumbach.de · info@ewm-ransbach-baumbach.de
EWM AG
Sales and Technology Centre
Grünauer Fenn 4
14712 Rathenow · Tel: +49 3385 49402-0 · Fax: -20
www.ewm-rathenow.de · info@ewm-rathenow.de
EWM AG
Rudolf-Winkel-Straße 7-9
37079 Göttingen · Tel: +49 551-3070713-0 · Fax: -20
www.ewm-goettingen.de · info@ewm-goettingen.de
EWM AG
Sachsstraße 28
50259 Pulheim · Tel: +49 2234 697-047 · Fax: -048
www.ewm-pulheim.de · info@ewm-pulheim.de
EWM AG
Eiserfelder Straße 300
57080 Siegen · Tel: +49 271 3878103-0 · Fax: -9
www.ewm-siegen.de · info@ewm-siegen.de
EWM HIGHTEC WELDING GmbH
Sales and Technology Centre
Draisstraße 2a
69469 Weinheim · Tel: +49 6201 84557-0 · Fax: -20
www.ewm-weinheim.de · info@ewm-weinheim.de
EWM Schweißtechnik Handels GmbH
Karlsdorfer Straße 43
88069 Tettnang · Tel: +49 7542 97998-0 · Fax: -29
www.ewm-tettnang.de · info@ewm-tettnang.de
EWM Schweißtechnik Handels GmbH
Pfaffensteig 17
89143 Blaubeuren · Tel: +49 7344 9191-75 · Fax: -77
www.ewm-blaubeuren.de · info@ewm-blaubeuren.de
EWM Schweißtechnik Handels GmbH
Heinkelstraße 8
89231 Neu-Ulm · Tel: +49 731 7047939-0 · Fax: -15
www.ewm-neu-ulm.de · info@ewm-neu-ulm.de
EWM AG
August-Horch-Straße 13a
56070 Koblenz · Tel: +49 261 963754-0 · Fax: -20
www.ewm-koblenz.de · info@ewm-koblenz.de
Sales and Service International
EWM HIGHTEC WELDING GmbH
Wiesenstraße 27b
4812 Pinsdorf · Austria · Tel: +43 7612 778 02-0 · Fax: -20
www.ewm-austria.at · info@ewm-austria.at
EWM HIGH TECHNOLOGY (Kunshan) Ltd.
10 Yuanshan Road, Kunshan · New & Hi-tech Industry Development Zone
Kunshan City · Jiangsu · Post code 215300 · People´s Republic of China
Tel: +86 512 57867-188 · Fax: -182
www.ewm.cn · info@ewm.cn · info@ewm-group.cn
Plants
Branches
EWM HIGHTEC WELDING UK Ltd.
Unit 2B Coopies Way · Coopies Lane Industrial Estate
Morpeth · Northumberland · NE61 6JN · Great Britain
Tel: +44 1670 505875 · Fax: -514305
www.ewm-morpeth.co.uk · info@ewm-morpeth.co.uk
EWM HIGHTEC WELDING Sales s.r.o. / Prodejní a poradenské centrum
Tyršova 2106
256 01 Benešov u Prahy · Czech Republic
Tel: +420 317 729-517 · Fax: -712
www.ewm-benesov.cz · info@ewm-benesov.cz
More than 400 EWM sales partners worldwide
Rathenow
ewm worldwide
Göttingen
Czech Republic
Benešov u Prahy
Pulheim
People's Republic of china
Kunshan
Siegen
Mündersbach
Koblenz
Austria
Pinsdorf
Ransbach-Baumbach
Great Britain
Morpeth
Weinheim
Blaubeuren
Neu-Ulm
Tettnang
Plants
Branches
Sales partners
More than 400 ewm sales partners worldwide – we‘re never far away.
Headquaters
Technology Centre
Sales and Logistics Centre
EWM AG
Dr. Günter-Henle-Straße 8
D-56271 Mündersbach
Tel: +49 2680 181-0 · Fax: -244
www.ewm-group.com
info@ewm-group.com
EWM AG
Forststraße 7-13
D-56271 Mündersbach
Tel: +49 2680 181-0 Fax:-144
www.ewm-group.com
info@ewm-group.com
EWM AG
Sälzerstraße 20a
D-56235 Ransbach-Baumbach
Tel: +49 2623 9276-0 · Fax: -244
www.ewm-sales.com
info@ewm-sales.com
Sales / Consultancy / Service
The content of this document has been prepared and
reviewed with all reasonable care. The information
provided is subject to change, errors excepted.
WM.0936.01 / 2014-10 / © EWM AG
Visit us!
Download PDF
Similar pages