TITANIUM
TYPICAL USES
• Lobbies & Entry Ways
• Walkways
• Showrooms
• Concourses
• Waiting Rooms
• Aisles
• Retail Areas
PACIFIC / BLIZZARD
ReFLEXions Designer Flooring by Dur-A-Flex® is a decorative, poured in
place flooring system combining Dur-A-Flex’s durable and reliable resin
systems with the latest in effects pigments to produce inspiring one-ofa-kind looks. ReFLEXions consists of a pigmented, epoxy primer coat;
pigmented, epoxy body coat and a long-wearing, gloss or satin
finish urethane topcoat. In addition to its seamless cleanability, it
requires no waxing.
UNIQUE IN EVERY WAY
• A smooth, glass-like finish offering breath-taking looks
• Choose from single or multicolor applications
• Limitless combinations allows you to make your own unique floor
• Totally seamless – easily integrates into coves and walls
• Competitively priced with traditional flooring options
DUR-A-FLEX DURABILITY
• Exceptional wear characteristics
• Stain resistant
• Chemical resistant
• UV resistant for color stability
LOW MAINTENANCE
• No waxing required – ever
• Reduces maintenance costs up to 85%
SUSTAINABLE
• Uses 100% solids epoxies and aliphatic urethanes
• Zero VOCs
• CA 01350 air quality compliant
• Requires no harsh cleaners
COPPER
ReFLEXions Standard Colors
BLIZZARD*
TITANIUM
NIMBUS
COPPER
SPICE
HAZELNUT
GARNET
COFFEE
DEEP SEA
SKY
PACIFIC
ONYX
*Due to the natural ambering nature of epoxy, light colors should be avoided as the
primary color in ReFLEXions floor systems.
ReFLEXions Designer Floors can be further enhanced by combining any of the standard colors, offering limitless opportunities
for a one-of-a-kind floor. While the options are endless, please see below for some suggested accent combinations:
TITANIUM with NIMBUS Accent
DEEP SEA with SKY Accent
COPPER with COFFEE Accent
PACIFIC with TITANIUM Accent
NIMBUS with TITANIUM Accent
GARNET with NIMBUS Accent
The samples shown are only close approximations and should not be used for specification purposes.
Contact Dur-A-Flex to obtain actual samples for best color selection.
PACIFIC
NIMBUS / TITANIUM
Physical Properties
Properties
Test Method
Result
Hardness (Shore D)
ASTM D-2240
75-80
Water Absorption
ASTM D-570
0.04%
Flammability
ASTM D-635
Self extinguishing
Flame Spread/NFPA 101
ASTM E-84
Class A
Tensile Strength
ASTM D-638
3,700 psi
Flexural Strength
ASTM D-790
4,700 psi
Compressive Strength
ASTM D-695
16,000 psi
Izod Impact (ft. Lb./in. notch)
ASTM D-256
0.50
Bond Strength to Concrete
ASTM D-4541
400 psi substrate fails
Elevated Temperature
MIL D-3134
No slip or flow
Thermal Shock
MIL F-52505
No cracking or loss of adhesion
UV Resistance
MIL F-52505
No chalking or loss of adhesion
Abrasion Resistance
ASTM D-4060
10 mg. loss - Gloss finish
50 cycles of immersion in chilled & boiling water
12 mg. loss - Satin finish
CS17 Wheel 1000 GR Load 1000 Cycles
VOC Content
0 g/L
Salt Spray Resistance, 25% solution at 90˚F
Toxicity
LEED® Eligibility
ReFLEXions
Construction Waste Mgmt
ReFLEXions System
Possible LEED Credits
2
MR2
Regional Material
No effect after 100 hours
Non-toxic, meets USDA requirements
Armor Top topcoat
ReFLEXions body coat
Pigmented primer
Substrate
2
MR 5.1, 5.2
Low Emitting Materials
2
IEQ 4.2, 4.3
No one makes it easier to select, specify and install high performance flooring systems than Dur-A-Flex. Every step of the way, you'll experience superior customer
service, professionalism and expertise as well as finely tuned processes—all the essentials which contribute to a solid business relationship.
CONNECTICUT | ILLINOIS | CALIFORNIA
Toll Free 800-253-3539 | 860-528-9838 | www.dur-a-flex.com
9/15
Download PDF
Similar pages