WDD 030-AU-en - Winning Appliances

Operating instructions
Washing machine
To avoid the risk of accidents or damage to the appliance, it is essential
to read these instructions before it is installed and used for the first time.
en-AU, NZ
M.-Nr. 10 832 560
Caring for the environment
Disposal of the packing
material
Disposing of your old
appliance
The transport and protective packaging
has been selected from materials which
are environmentally friendly for
disposal, and can normally be recycled.
Electrical and electronic appliances
often contain valuable materials. They
also contain specific materials,
compounds and components, which
were essential for their correct function
and safety. These could be hazardous
to human health and to the environment
if disposed of with your domestic waste
or if handled incorrectly. Please do not,
therefore, dispose of your old appliance
with your household waste.
Recycling the packaging reduces the
use of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites. Ensure that any plastic
wrappings, bags etc. are disposed of
safely and kept out of the reach of
babies and young children. Danger of
suffocation.
Please dispose of it at your local
community waste collection / recycling
centre for electrical and electronic
appliances. You are also responsible for
deleting any personal data that may be
stored on the appliance prior to
disposal. Please ensure that your old
appliance poses no risk to children
while being stored prior to disposal.
2
Contents
Caring for the environment .................................................................................. 2
Warning and Safety instructions ......................................................................... 6
Operating the washing machine ........................................................................ 13
Control panel ......................................................................................................... 13
How the control panel works ................................................................................ 14
Before using for the first time ............................................................................ 16
Washing environmentally and economically .................................................... 18
1. Preparing the laundry...................................................................................... 19
2. Loading the washing machine ....................................................................... 20
3. Selecting a programme .................................................................................. 21
4. Adding detergent............................................................................................. 23
Detergent dispenser drawer .................................................................................. 23
Tips on dosing.................................................................................................. 23
Filling with detergent ........................................................................................ 23
CapDosing............................................................................................................. 24
5. Starting the programme ................................................................................. 26
6. End of programme - unload the drum ........................................................... 27
Spinning................................................................................................................ 28
Delay start ............................................................................................................ 30
Programme chart ................................................................................................ 31
Extras.................................................................................................................... 34
Short...................................................................................................................... 34
Water plus ............................................................................................................. 34
Pre-wash ............................................................................................................... 34
Soak ...................................................................................................................... 34
The following Extras can be selected in addition to the programme .................... 35
Programme sequence......................................................................................... 36
Changing the programme sequence ................................................................. 38
Changing a programme......................................................................................... 38
Cancelling a programme ....................................................................................... 38
Interrupting a programme...................................................................................... 38
Adding or removing laundry .................................................................................. 39
3
Contents
Garment care label symbols............................................................................... 40
Detergent ............................................................................................................. 41
The correct detergent............................................................................................ 41
Detergent dispensing aids..................................................................................... 41
Fabric softeners and liquid starch ......................................................................... 41
Miele recommended detergents ........................................................................... 42
Cleaning and care ............................................................................................... 45
Cleaning the drum (Hygiene info) .......................................................................... 45
External casing and fascia panel........................................................................... 45
Cleaning the detergent dispenser drawer ............................................................. 45
Cleaning the water inlet filter ................................................................................. 47
Problem solving guide ........................................................................................ 48
Problem solving guide........................................................................................... 48
The programme does not start.............................................................................. 48
The programme is cancelled and a fault indicator light lights up in
the control panel.................................................................................................... 49
During the programme, a symbol appears in the time display ............................. 50
At the end of the programme, an indicator light lights up in the control panel ..... 50
General problems with the washing machine ....................................................... 51
An unsatisfactory wash result ............................................................................... 53
The door will not open........................................................................................... 54
Opening the door in the event of a blocked drain outlet and/or power cut .......... 55
After sales service............................................................................................... 57
Contact in case of fault ......................................................................................... 57
Optional accessories............................................................................................. 57
Warranty ................................................................................................................ 57
Installation and connection ................................................................................ 58
Front view .............................................................................................................. 58
Rear view............................................................................................................... 59
Installation surface ................................................................................................ 60
Transporting the washing machine to its installation site...................................... 60
Removing the transit bars ..................................................................................... 60
Refitting the transit bars ........................................................................................ 62
Levelling the machine............................................................................................ 63
Screwing out and adjusting the feet................................................................. 63
Building under a continuous worktop / in a kitchen run................................... 64
Washer and dryer stack ................................................................................... 64
4
Contents
The Miele water protection system .......................................................................
Connection to the water supply ............................................................................
Drainage ................................................................................................................
Electrical connection ............................................................................................
65
66
67
68
Technical data...................................................................................................... 69
Consumption data ............................................................................................... 70
Consumption data for the nominated energy labelling programme according
to AS/NZS 2040.1 & AS/NZS 2040.2 .................................................................... 70
Programmable functions .................................................................................... 72
Choosing and selecting programmable functions ................................................ 72
Editing and saving the programmable function .................................................... 73
Exiting the programming level ............................................................................... 73
 Keypad tone..................................................................................................... 73
 PIN Code......................................................................................................... 74
 Control panel standby status ......................................................................... 74
 Memory .......................................................................................................... 75
 Longer pre-wash Cottons .............................................................................. 75
 Soak duration ................................................................................................. 75
 Gentle action .................................................................................................. 75
 Reduce temperature....................................................................................... 76
 Water plus....................................................................................................... 76
 Water plus level ............................................................................................... 76
 Maximum rinse level ....................................................................................... 76
 Suds cooling ................................................................................................... 77
 Anti-crease ..................................................................................................... 77
 Backlight brightness dimmed ........................................................................ 77
Optional accessories .......................................................................................... 78
Detergent............................................................................................................... 78
Specialist detergents............................................................................................. 78
Fabric care............................................................................................................. 79
Additives................................................................................................................ 79
Machine care products.......................................................................................... 79
5
Warning and Safety instructions
This washing machine complies with current safety requirements.
Inappropriate use can, however, lead to personal injury and
damage to property.
To avoid the risk of accidents and damage to the machine, please
read these instructions carefully before using it for the first time.
They contain important information on its safety, use and
maintenance.
Keep these instructions in a safe place and ensure that new users
are familiar with the content. Pass them on to any future user.
Correct application
 This washing machine is designed for domestic use and for use in
similar environments by guests in hotel or motel rooms, bed &
breakfasts and other typical living quarters. This does not include
common/shared facilities or commercial facilities within hotels,
motels or bed & breakfasts.
 The washing machine is not suitable for outdoor use.
 It must only be used to wash garments which have been declared
suitable for washing by the manufacturer indicated on the garment
care label. Any other use is not permitted. Miele cannot be held
liable for damage resulting from incorrect or improper use or
operation.
 This washing machine is not intended for use by persons
(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning its use by a person
responsible for their safety.
6
Warning and Safety instructions
Safety with children
 Young children must not be allowed to use this appliance.
 Older children may only use the appliance when its operation has
been clearly explained to them and they are able to use it safely,
recognising the dangers of misuse.
 Cleaning work may only be carried out by older children under the
supervision of an adult.
 Please supervise children in the vicinity of the washing machine
and do not let them play with it.
Technical safety
 Please observe the instructions in "Installation and connection"
and "Technical data".
 Before setting up the washing machine, check it for any externally
visible damage. Do not install or use a damaged machine.
 Before connecting the washing machine, ensure that the
connection data on the data plate (fuse rating, voltage and
frequency) matches the mains electricity supply. If in any doubt,
consult a qualified electrician.
 Reliable and safe operation of this washing machine can only be
assured if it has been connected to the mains electricity supply.
7
Warning and Safety instructions
 The electrical safety of this washing machine can only be
guaranteed when continuity is complete between it and an effective
earthing system which complies with current local and national
safety regulations. It is most important that this basic safety
requirement is present and regularly tested and, where there is any
doubt, the household wiring system should be inspected by a
qualified electrician. Miele cannot be held liable for the
consequences of an inadequate earthing system (e.g. electric
shock).
 Do not connect the washing machine to the mains electricity
supply by a multi-socket adapter, extension lead or similar. These do
not guarantee the required safety of the machine (fire hazard due to
the risk of overheating).
 Faulty components must only be replaced by genuine Miele spare
parts. Miele can only guarantee the safety of the appliance when
Miele replacement parts are used.
 The electrical socket must be easily accessible after installation so
that the machine can be disconnected from the electricity supply if
necessary.
 Unauthorised repairs could result in unforeseen dangers for the
user, for which Miele cannot accept liability. Repairs should only be
undertaken by a Miele authorised service technician, otherwise any
subsequent damage will not be covered by the warranty.
 If the connection cable is faulty, it must only be replaced by a
Miele approved service technician to protect the user from danger.
8
Warning and Safety instructions
 In the event of a fault or for cleaning purposes, the washing
machine is only completely isolated from the electricity supply when:
– it is switched off at the wall socket and the plug is withdrawn, or
– it is switched off at the mains circuit breaker.
 The machine must only be connected to the on-site water supply
using a new hose kit. Old hose kits must not be re-used. Check the
condition of the hoses regularly so that you can replace them in
good time and avoid the risk of any water damage.
 The water flow pressure must be at least 100 kPa and should not
exceed 1000 kPa.
 This washing machine must not be installed and operated in
mobile installations (e.g. on a ship).
 Do not make any alterations to the machine, unless authorised to
do so by Miele.
 In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the machine and its
surroundings in a clean condition at all times. Any damage which
may be caused by cockroaches or other vermin will not be covered
by the machine warranty.
9
Warning and Safety instructions
Correct use
 Do not install the washing machine in a room where there is a risk
of frost. Frozen hoses may burst or split. The reliability of the
electronic control unit may be impaired at temperatures below
freezing point.
 Before using the machine for the first time, check that the transit
bars at the rear of the machine have been removed (see "Installation
and connection - Removing the transit bars"). During spinning, a
transit bar which is still in place may result in damage to both the
machine and adjacent furniture or appliances.
 Turn off the tap if the machine is to be left for any length of time
(e.g. holiday), especially if there is no floor drain (gully) in the
immediate vicinity.
 Flooding danger.
If hooking the drain hose into a wash basin, check that the water can
drain off quickly enough to prevent the sink from overflowing. Make
sure the drain hose is secure, so that the force of the water flowing
out of the hose does not dislodge it.
 Take care to ensure that foreign objects (e.g. nails, pins, coins,
paper clips) do not find their way into the machine with the laundry.
These may damage components of the machine (e.g. suds
container, drum), which in turn can result in damage to the laundry.
 The maximum load for this washing machine is 8 kg (dry weight).
See the "Programme chart" for the maximum recommended loads
for individual programmes.
10
Warning and Safety instructions
 If the correct amount of detergent is dispensed, the machine
should not need to be descaled. If, however, you do wish to descale
it, only use a proprietary natural citric acid based descaling agent.
Miele recommends using Miele descaler for washing machines
which is available to order online at shop.miele.com (depending on
country) or from Miele. Strictly observe the instructions on the
packaging.
 Textiles which have been pre-treated in solvent based cleaning
agents must be thoroughly rinsed in clean water before being
washed in the machine.
 Do not use solvent based cleaning agents, e.g. those containing
benzine, in this machine, as this may result in damage to component
parts and create toxic fumes. Such agents also pose a fire and
explosion hazard.
 Do not use solvent based cleaning agents, e.g. those containing
benzine, to clean the external surfaces of the machine. They can
cause damage to plastic surfaces.
 Only use dyes specified by the manufacturer as being suitable for
use in a domestic washing machine. Always observe the
manufacturer's instructions carefully.
 Colour run and dye removers contain sulphur compounds which
can cause damage such as corrosion. Do not use these products in
this machine.
 If detergent comes into contact with the eyes, rinse them
thoroughly with lukewarm water immediately. If swallowed, seek
medical assistance immediately and retain the packaging or label for
reference. Those with skin problems or sensitive skin should avoid
their skin coming into contact with detergent.
11
Warning and Safety instructions
Accessories
 Only use genuine Miele spare parts and accessories with this
appliance. If spare parts or accessories from other manufacturers
are used, this will invalidate the warranty, and Miele cannot accept
liability.
 A Miele tumble dryer can be stacked on top of a Miele washing
machine using the appropriate stacking kit (available as an optional
accessory). Please make sure you order the correct one for the Miele
washing machine and Miele tumble dryer.
Miele cannot be held liable for damage caused by non-compliance
with these Warning and Safety instructions.
12
Operating the washing machine
Control panel
a Control panel
b Sensor controls – temperature
for selecting the temperature.
c Sensor controls – spin speed
for selecting the spin speed.
d Sensor controls – Extras
various options can be added to the
wash programmes.
e Indicator lights   
light up when necessary
f Sensor controls – CapDosing
g Time display
for the programme duration
h Sensor controls   
for the Delay start function
i Start/Stop sensor
for programme start/cancellation
j Optical interface
for service technicians
k Programme selector
for selecting programmes and for
switching off. The washing machine
is switched on by selecting a
programme, and switched off by
turning the programme selector to
the  position.
13
Operating the washing machine
How the control panel works
 Sensor controls for Extras
You can select Extras to augment the
wash programmes.
If a wash programme has been
selected, the sensor controls for the
possible Extras light up dimly.
 Indicator lights
– 
lights up if there are faults with the
water inlet and drainage
The , , , ,  and  sensors
react to fingertip contact. Selection is
possible as long as the respective
sensor is illuminated.
If a sensor is brightly lit, this means:
currently selected
If a sensor is dimly lit, this means:
selection possible
 and  sensors for temperature
and spin speed
After selecting a wash programme with
the programme selector, the
recommended temperature (in °C) and
spin speed (in rpm) light up brightly.
Selectable temperatures and spin
speeds light up dimly.
– 
lights up if excess detergent was
used
– 
lights up as a reminder about hygiene
information
– 
flashes for as long as it is possible to
add laundry
lights up when the door of the
washing machine is locked
 CapDosing
The CapDosing sensors are used for
activating cap dosing.
– 
Fabric care (e.g. fabric conditioner)
– 
Additives (e.g. detergent enhancers)
– 
Detergent (for the main wash only)
14
Operating the washing machine
 Time display
 Start/Stop sensor
After the programme has started, the
programme duration will appear in the
display in hours and minutes.
Touching the Start/Stop sensor starts
the selected programme or cancels a
programme that has already been
started. The sensor flashes slowly as
soon as it is possible for a programme
to be started and then lights up
constantly after the programme has
started.
When Delay start is being used, the
programme duration will appear after
the Delay start time has elapsed.
 Sensor controls   
– 
After touching the  sensor, a later
start time for the programme (Delay
start) can be selected. Once
selected,  lights up brightly.
– 
The duration of the Delay start period
is selected by touching the  or
 sensor.
The Delay start time selected will
appear in the time display.
After the programme has started, the
Delay start time will begin to count
down.
Once the Delay start time has elapsed,
the programme begins and the
estimated programme duration appears
in the time display.
15
Before using for the first time
 Before using the machine for the
first time, ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the filters are securely
tightened to prevent the risk of water
leaks during use.
Removing the protective foil
and stickers
 Please remove
– the protective foil from the door.
– any stickers from the front and the lid
(Exception: warning labels must not
be removed).
 Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.
Remove the drain hose elbow
from the drum
An elbow piece for the drain hose is
stored in the drum.
 Shut the door with a gentle swing.
This washing machine has undergone
a complete functional test at the
factory and there will be some residual
water in the drum from this process.
For safety reasons, spinning is not
possible until the machine has been
prepared for using for the first time. To
activate the spinning function, you must
run a wash programme without laundry
and without detergent.
Using detergent could result in an
excessive build-up of foam.
This also activates the ball valve. The
ball valve prevents detergent escaping
from the suds container into the sump
during a wash programme, thus making
maximum use of the detergent.
 Reach under the door grip and pull
the door open.
 Remove the elbow piece.
16
Before using for the first time
Running the first programme
 Turn on the tap.
 Turn the programme selector to
Cottons.
The washing machine is now switched
on and in the control panel, the
temperature 60°C lights up.
 Touch the Start/Stop sensor.
The programme will start and the 
symbol lights up in the control panel.
After 10 minutes, the indicators dim
and the Start/Stop sensor lights up
constantly.
After the end of the programme
At the end of the programme, the Anticrease function is switched on. The
 symbol lights up in the control panel;
: appears in the time display and
the drum occasionally rotates.
 When the programme has ended,
turn the programme selector to .
The washing machine is switched off
and is now ready for use.
Useful tip: For safety reasons close the
door. Otherwise there is a danger of
objects being placed inadvertently in
the drum. If these remain unnoticed and
were washed in the next load, they
could damage the laundry. An open
door is also a danger to pets and
children.
Energy savings
– 10 minutes after the beginning of the
anti-crease phase, the indicators dim
and the Start/Stop sensor starts
flashing.
– 15 minutes after completion of the
anti-crease phase, the washing
machine switches off completely and
the door lock is released.
 Touch the Start/Stop sensor.
The door will be unlocked.
 Reach under the door grip and pull
the door open.
17
Washing environmentally and economically
Energy and water consumption
Detergent consumption
– To get the most out of your machine,
load the maximum dry load for the
programme you are using.
The energy and water consumption
will be the lowest in relation to the
size of the load.
– Do not exceed the amounts of
detergent recommended by the
manufacturer on the packaging.
– When smaller amounts of laundry are
washed, the Auto load control system
will reduce the amount of water and
energy used.
– Use the Express 20 programme for
small, lightly soiled loads.
– Modern detergents make it possible
to wash at lower temperatures (e.g.
20°C). Using lower temperature
settings will save energy.
– To maintain the hygiene of the
machine, carry out a hot wash (above
60°C) at regular intervals. The 
indicator will come on to remind you
to carry out a hot wash.
– Adjust the dosage to the degree of
soiling of the laundry.
– Reduce the amount of detergent with
smaller loads (approx. ⅓ less than
the amount recommended can be
used when washing a half load).
Choosing the correct Extra option
(Short, Soak, Pre-wash)
Select:
– a wash programme together with the
Short Extra option for light to
moderate soiling where there are no
obvious marks.
– a wash programme without any Extra
options for moderate to heavy soiling
with visible staining.
– a wash programme together with the
Soak Extra option for heavily soiled
laundry.
– the Pre-wash Extra option for laundry
with large amounts of dirt (e.g. dust,
sand).
When drying with a tumble dryer
Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
18
1. Preparing the laundry
Useful tip: Stains can be pre-treated
using some handy tricks, which can be
found in "Miele's guide to laundry care".
Please contact Miele to obtain a copy
of this booklet.
 Solvent-based cleaners (e.g. one
 Empty all pockets.
 Foreign objects (e.g. nails, coins,
paper clips, etc.) can cause damage
to garments and components in the
machine.
Check the laundry before washing
and remove any such foreign
objects.
containing benzine) can damage
plastic parts.
When pre-treating garments, make
sure that any plastic parts (e.g.
buttons) do not come into contact
with cleaning agent.
 Chemical (solvent-based)
cleaning agents can cause severe
damage to the washing machine.
Do not use solvent-based cleaning
agents in this machine.
General tips
Sorting the laundry
– Curtains: Remove lead weights first
or place in a laundry bag.
 Sort the laundry by colour and by
care label. Most garments have a
textile care label in the collar or side
seam.
– Underwiring and collar stiffeners: Any
loose wiring in bras, shirt collar
stiffeners, etc. should be removed or
sewn in.
Useful tip: Dark textiles often contain
excess dye and should be washed
separately several times before being
included in a mixed load. Always wash
white and coloured items separately.
– Close any zips, attach velcro
fasteners, fasten hooks and eyes etc.
before washing.
Pre-treating stains
 Badly soiled areas, stains etc. should
be cleaned as soon as possible,
preferably while still fresh. Spillages
should be carefully dabbed off using
a soft, colourfast cloth. Do not rub.
– Fasten duvet covers and pillow cases
to prevent small items from being
rolled up inside them.
Do not wash any items in this machine
which are specified by the manufacturer
as not washable on the care label (
symbol).
19
2. Loading the washing machine
Opening the door
Closing the door
 Reach under the door grip and pull
the door open.
 Make sure that no items are caught
between the door and the seal.
Check the drum for pets or foreign
objects before loading it with
laundry.
The most efficient use of energy and
water is achieved when a full load is
washed. However, do not overload as
this reduces cleaning efficiency and
causes creases.
 Unfold the laundry and load loosely in
the drum.
Mixing both large and small items
gives better wash results and also
helps distribute the load evenly during
spinning.
Useful tip: Please note the maximum
load for the different wash programmes.
20
 Shut the door with a gentle swing.
3. Selecting a programme
Programme selection
The washing machine is switched on by
turning the programme selector to a
wash programme.
Selecting a temperature/spin speed
The wash programme's pre-set
temperature and spin speed light up
brightly. The choice of temperatures
and spin speeds selectable for the
wash programme light up dimly.
 Turn the programme selector to the
required programme.
The likely wash time is shown in the
time display and the pre-set
temperature and spin speed light up in
the control panel.
 Touch the sensor for the temperature
you want. It then lights up brightly.
 Touch the sensor for the spin speed
you want. It then lights up brightly.
21
3. Selecting a programme
Selecting Extras
The selection of Extras available for
the wash programme lights up dimly.
 Touch the sensor for the Extra you
want. It then lights up brightly.
Useful tip: You can select multiple
Extras for a wash programme.
Please refer to "Extras" for more
information.
22
4. Adding detergent
Detergent dispenser drawer
Filling with detergent
Any detergent suitable for automatic
front loading washing machines can be
used with this appliance. Please
observe the instructions for use and
dosage on the detergent packaging.
Tips on dosing
Adjust the detergent dosage to the level
of soiling of the laundry and the size of
the load. Reduce the amount of
detergent with smaller loads (e.g.
reduce the amount of detergent by ⅓
when washing a half load).
Too little detergent results in:
 Pull out the detergent drawer and add
detergents to the compartments.
– laundry not getting properly clean
and with time it may become grey
and hard to the touch.
 Detergent for the pre-wash
– a build-up of mould in the washing
machine.
 Fabric softener, liquid starch, or
 capsules
 Detergent for the main wash and
soaking
– grease not being completely removed
from the laundry.
– limescale deposits on the heater
elements.
Too much detergent results in:
– poor wash, rinse, and spin results.
– a higher water consumption as an
extra rinse cycle is automatically
activated.
– a greater burden on the environment.
23
4. Adding detergent
CapDosing
Inserting a capsule
Three different types of capsule are
available:
 Open the detergent dispenser drawer.

= Fabric care (e.g. fabric
softener)
 = Additives (e.g. detergent
enhancers)

= Detergent (for the main wash
only)
Each capsule contains the correct
amount for one wash cycle.
You can order the capsules online at
shop.miele.com (depending on country)
or from Miele (see the end of this
booklet for contact details).
 Open the lid of the /
compartment.
 Keep capsules out of the reach
of children.
Activating CapDosing
 Touch the sensor for the capsule you
want to use.
Sensor
24
Capsule

for


for


for

 Press the capsule in firmly.
4. Adding detergent
The wash programme will dispense the
contents of the capsule at the correct
time.
Water intake to the  compartment
is solely via the capsule.
No additional fabric softener may be
added to the  compartment when
using a capsule.
 Remove the empty capsule at the
end of the programme.
 Close the lid and press it firmly shut.
 Close the detergent dispenser
drawer.
The capsule is opened by the act of
inserting it in the detergent dispenser
drawer. The contents can run out of
the capsule if you then remove it
from the drawer before it is used.
In this case, dispose of the capsule
and do not re-use it.
For technical reasons a small amount
of water will remain in the capsule.
Deactivating/Changing
CapDosing
 In order to switch off CapDosing,
touch the brightly lit sensor.
 In order to change CapDosing, touch
one of the other capsule sensors.
25
5. Starting the programme
Starting the programme
 Touch the flashing Start/Stop sensor.
The door will lock and the programme
will start.
– As long as the  symbol is flashing
in the control panel you can add
laundry.
– When the  symbol lights up
constantly, the door is locked until
the end of the programme.
If a Delay start time has been selected,
it will count down in the time display. At
the end of the Delay start time or
immediately after the programme has
started (if no Delay start time has been
selected), the programme duration will
appear in the time display.
Energy savings
After 10 minutes, if a programme has
not been started or a sensor has not
been touched, the indicators will dim.
The Start/Stop sensor flashes slowly.
You can reactivate the indicators:
 To do this, touch the Start/Stop
sensor (this does not have any effect
on a running programme).
26
6. End of programme - unload the drum
At the end of the programme
The time display shows 0:00. The 
symbol will remain lit up in the control
panel. The door is locked in the anticrease phase.
Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Check that all items have been
removed from the drum.
 Touch the Start/Stop sensor.
The door will unlock and the symbol 
in the control panel goes out.
 Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
 Pull open the door.
 Remove the laundry.
Energy savings
– 10 minutes after the beginning of the
anti-crease phase, the indicators dim
and the Start/Stop sensor starts
flashing.
– 15 minutes after completion of the
anti-crease phase, the washing
machine switches off completely and
the door lock is released.
 Turn the programme selector to the 
position. This switches the washing
machine off.
 If applicable, remove the used
capsule from the detergent dispenser
drawer.
Useful tip: Leave the detergent
dispenser drawer slightly open to allow
it to dry. Close the door of the washing
machine.
27
Spinning
Final spin speed
Programme
Max. possible
rpm
Cottons 
1400
Cottons
1400
Minimum iron
1200
Delicates
900
Woollens 
1200*
Shirts
900
Express 20
1200
Dark garments/Denim
1200
Outerwear
900
Proofing
1200
Drain/Spin
1400
Separate rinse/Starch
1200
Final spin speed in the
programme
When a programme is selected, the
sensor for the optimum spin speed for
that programme will be brightly lit up in
the control panel. For programmes
marked with a * in the chart, the
optimum spin speed is not the
maximum spin speed.
You can reduce the final spin speed or,
depending on the programme, increase
it.
However, you cannot select a final spin
speed higher than that shown in the
chart.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for the
Cottons programme, an additional rinse
is introduced.
28
Spinning
Omitting the final spin (Rinse
hold)
Omitting rinse and interim spin
and the final spin
 Touch the  sensor (Rinse hold).
 Touch the  sensor.
The laundry is not spun after the final
rinse and remains in the rinse water.
This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch on.
In some programmes an additional rinse
is introduced with this setting.
After the end of a programme
The sensor for the optimum spin
speed lights up in the control panel.
You can change the spin speed. The
Start/Stop sensor will light up,
flashing.
 Start the final spin:
touch the flashing Start/Stop sensor
once.
The final spin is carried out.
 End the programme:
touch the flashing Start/Stop sensor
twice.
The water will be pumped away.
29
Delay start
With Delay start you can delay the start
of a programme from 30 minutes up to
a maximum of 24 hours. This allows
you to make use of night-time economy
electricity rates, for example.
Starting Delay start
Selecting Delay start
Altering Delay start
Delay start cannot be selected with
Drain/Spin or Proofing.
 Select the programme required.
 Touch the  sensor.
 Touch the flashing Start/Stop sensor.
The Delay start process starts and
counts down in the time display.
 Touch the Start/Stop sensor.
The Delay start process stops and the
 symbol in the control panel goes out.
 Touch the  or  sensor repeatedly
until the required delayed start time
appears in the time display.
 Touch the flashing Start/Stop sensor.
To cancel a Delay start that has
already started
 Touch the Start/Stop sensor.
The Delay start process stops and the
 symbol in the control panel goes out.
 Touch the brightly lit  sensor.
The  sensor lights up brightly.
 Touch the  or  sensor repeatedly
until the required delayed start time
appears in the time display.
– For less than 10 hours, the Delay
start time changes in increments of
30 minutes
– For more than 10 hours, the Delay
start time changes in increments of 1
hour
30
Delay start is cancelled and the 
sensor goes out. The programme
duration appears in the time display.
 Touch the flashing Start/Stop sensor
in order to start the wash programme.
Programme chart
Cottons 
60°C
Max. load 8.0 kg
Items
Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,
underwear, T-shirts etc.
Note
With 60°C the actual wash temperature reached will be lower than
60°C although the wash performance is the same as with the
standard Cottons 60°C programme.
Cottons 
40°C
Max. load 8.0 kg
Items
Normally soiled cotton garments
Note
These settings are the most efficient in terms of energy and water
consumption for washing cottons.
Energy labelling programme according to AS/NZS 2040.1 & AS/NZS 2040.2
Cottons
Cold to 90°C
Max. load 8.0 kg
Items
Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,
underwear, T-shirts etc.
Note
The settings 60°/40°C differ from / as follows:
– Shorter programme durations
– Longer temperature holding times
– Higher energy consumption
Where particularly high levels of hygiene are required, please select
a temperature of 60°C or higher.
Minimum iron
Cold to 60°C
Max. load 3.5 kg
Items
Synthetic, mixed fibre and easy care cotton
Note
Reduce the spin speed for fabrics which crease easily.
31
Programme chart
Delicates
Items
Cold to 40℃
Max. load 2.0 kg
Delicate garments made from synthetic fibre, mixed fibre, rayon and
viscose.
Curtains, including net curtains, specified as machine-washable by
the manufacturer.
Notes
– Dust in curtains usually makes using a programme with a prewash advisable.
– For items which crease easily, deselect the spin.
Woollens 
Cold to 40°C
Max. load 2.0 kg
Items
Machine-washable or hand-washable wool or wool blend fabric. If
the care label does not specify a temperature, wash using the cold
setting.
Note
Reduce the spin speed for items which crease easily.
Shirts
Cold to 60°C
Items
Shirts and blouses made of cotton and mixed fibre
Notes
– Pre-treat collars and cuffs if necessary.
Max. load 2.0 kg
– Wash silk shirts and blouses in the Delicates programme.
Express 20
Cold to 40°C
Max. load 3.5 kg
Items
Cotton garments that have hardly been worn or are only very lightly
soiled.
Note
The Short Extra is activated automatically.
Darks / Denim
Cold to 60°C
Max. load 3.0 kg
Items
Black and dark garments made from cotton, mixed fibres and
denim.
Notes
– Wash inside out.
– Denim often contains excess dye and may run during the first few
washes. Wash light and dark coloured items separately.
32
Programme chart
Outerwear
Cold to 40°C
Max. load 2.5 kg
Items
Performance outerwear (e.g. jackets and trousers) made from
membrane fabric such as Gore-Tex®, SYMPATEX®,
WINDSTOPPER® etc.
Notes
– Zip up or close jackets before washing.
– Do not use fabric softener.
– If required, these garments can also be re-proofed using the
Proofing programme. Proofing should not be done every time the
garment is washed.
Proofing
40°C
Max. load 2.5 kg
Items
Treating microfibre fabric, skiwear and table linen made from mainly
synthetic fibres to provide a water and dirt resistant finish.
Notes
– The items should be freshly laundered and spun or dried before
proofing.
– For best results, the items should be heat-treated afterwards either
in a tumble dryer or by ironing.
Drain/Spin
Notes
–
– Drain only: Select  for the spin speed.
– Make sure you select the appropriate spin speed.
Separate rinse/Starch
Items
Max. load 8.0 kg
– For rinsing hand-washed items.
– Starching table cloths, serviettes and workwear.
Notes
– Reduce the spin speed for items which crease easily.
– Laundry that is to be starched should be washed but not treated
with fabric softener.
– Items will be rinsed very effectively with two rinses by activating
the Water plus Extra.
33
Extras
You can use the Extra option sensors to
augment the wash programmes.
Extras are selected and deselected
using the relevant sensors on the
control panel.
Water plus
The water level in the wash and rinse
stages is increased and a second rinse
is carried out in the "Separate rinse/
Starch" programme.
You can select other functions for the
Water plus sensor. These are described
in "Programmable functions".
Pre-wash
For laundry with large amounts of dirt,
e.g. dust and sand.
Soak
For heavily soiled and stained items
with protein stains.
 Touch the sensor for the Extra you
want.
The relevant sensor will light up brightly.
Not all the Extras can be used with
every programme.
An Extra that is not permitted for the
wash programme is not lit dimly and
cannot be activated by touch.
Short
For light soiling with no visible staining.
The wash duration is reduced.
34
– A duration of between 30 minutes
and two hours can be programmed in
30-minute increments for the soak
process.
– The factory default setting is 30
minutes.
See "Programmable functions - Soak
duration" for instructions on how to
programme a different soak period.
Extras
The following Extras can be selected in addition to the
programme
Short
Water plus
Pre-wash
Soak
These Extras cannot be selected with programmes which are not listed in the
chart below.
Cottons 
X
X
X
X
Cottons
X
X
X
X
Minimum iron
X
X
X
X
Delicates
X
X
X
X
Shirts
X
X
X
X
Express 20
X
–
–
–
Dark garments/Denim
X
X
X
X
Outerwear
X
X
X
X
Separate rinse/Starch
–
X
–
–
X = Can be selected
1)
1)
= Can be deselected
– = Cannot be selected
35
Programme sequence
Main wash
Rinse
Spin
Water
level
Wash
rhythm
Water
level
Rinses
Cottons



2-5
Cottons



2-5
Minimum iron



2-4
Delicates



2-4
Woollens 



2
2)3)

1)2)3)

2)3)

2)3)


3)
Shirts



3-4

Express 20



1

Darks / Denim



3-5
Outerwear



Proofing
–

Drain/Spin
–
–
Separate rinse / Starch


2)3)

3-4
3)


1

–
–

Please see the next page for a description of the symbols.
36

5)
0-1

Programme sequence
 = Low water level
 = Medium water level
 = High water level

= Intensive rhythm

= Normal rhythm

= Sensitive rhythm

= Ultra sensitive rhythm

= Handwash rhythm

= Carried out
–
= Not carried out
The washing machine has fully
electronic controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate.
The programme sequences outlined in
the chart are based on the basic
programme with a full load.
The washing machine programme
sequence display shows which stage of
the programme has been reached.
Special features in the
programme sequence
Anti-crease:
At the end of the programme the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: there is no anti-crease
phase in the Woollens programme.
The door can be opened at any time
during the anti-crease phase.
1)
If a temperature of 60°C or higher is
selected and with 40°C  and
60°C  two rinses are carried out.
If a temperature of less than 60°C is
selected, three rinses are carried out.
2)
An additional rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected.
3)
An additional rinse is carried out if:
– Water plus has been selected and the
options  or  have been activated
in Programmable functions.
5)
An additional rinse is carried out if:
the Water plus Extra is selected.
37
Changing the programme sequence
Changing a programme
After the successful start of a
programme it is no longer possible to
select a different programme.
If you would like to change the
programme or add/remove laundry, you
have to cancel the programme.
Cancelling a programme
You can cancel a programme at any
time after it has started.
 Touch and hold the Start/Stop sensor
until the time display switches to
:.
The water will be pumped away. As
soon as the  symbol in the control
panel goes out, the programme has
been cancelled and the door can be
opened.
Removing laundry after cancelling
the programme
If you want to remove the laundry when
it is dripping wet:
 Open the door.
 Remove the laundry.
If you want to remove the laundry after
it has been spun (damp):
 Open the door.
 Close the door.
 Turn the programme selector to
Drain/Spin.
Useful tip: Select an appropriate spin
speed.
 Touch the Start/Stop sensor. The
laundry is spun and can be removed
after spinning.
 Open the door.
Interrupting a programme
Selecting a different programme after
cancelling the programme
 Turn the programme selector to the
 position.
 Close the door.
The washing machine switches off.
 Check that there is still detergent in
the dispenser drawer. Add more
detergent if necessary.
 To continue: turn the programme
selector to the position of the wash
programme that was started.
 Turn the programme selector to the
programme you want and start it by
touching the Start/Stop sensor.
Useful tip: If  appears in the time
display, the programme selector is in
the incorrect position.
38
Changing the programme sequence
Adding or removing laundry
You can add or remove laundry at the
start of a wash programme as long as
the  symbol is flashing in the control
panel.
 Briefly touch the Start/Stop sensor.
The programme will stop and the door
will unlock.
 Pull open the door.
 Add or remove items.
 Close the door.
 Touch the Start/Stop sensor.
The wash programme will continue.
39
Garment care label symbols
Washing
Drying
The figure quoted in the symbol is the
maximum temperature at which the
garment can be washed. The number
of bars under the symbol indicates the
level of agitation permitted.
The number of dots indicates the
drying temperature.

No bar under the symbol =
normal agitation

One bar under the symbol =
reduced agitation



Two bars under the symbol =
much reduced agitation
Hand wash (If no temperature is
specified, use the lowest
temperature or cold)

Normal temperature

Low temperature

Do not tumble dry
Ironing
The number of dots indicates the
ironing temperature.

approx. 200℃

approx. 150℃

approx. 110℃
Do not steam iron garments
carrying this symbol as this
could cause irreversible
damage.
Do not wash
Programme selection examples
Programme
Garment care label
symbols

Cottons

Minimum iron


Delicates


Woollens 

Express 20

Do not iron
Professional cleaning
Dry clean only. The letters
indicate the type of cleaning
agent required.

Professional Wet Clean only

Do not dry clean
Bleaching
40

Any oxidising bleaching agent
can be used

Only use an oxygen based
bleach or a non-chlorine bleach

Do not bleach
Detergent
The correct detergent
Detergent dispensing aids
All detergents produced for automatic
front loading washing machines are
suitable. Follow the manufacturer's
instructions and dosage
recommendations on the packaging.
Use dispensing aids (e.g. balls) if these
are supplied with the detergent,
particularly when using liquid detergent.
The right amount to dispense
will depend on the following:
– The soiling level of the laundry.
Refill packs of detergent
When purchasing detergent, buy refill
packs wherever possible. This helps
reduce the amount of waste packaging.
– The quantity of laundry.
Fabric softeners and liquid
starch
– The water hardness level. Check with
your local water authority if you do
not know the water hardness level in
your area.
Fabric softeners
make garments soft to handle and help
prevent static cling when tumble drying.
Fabric shapers
are synthetic starches and give an even
stiffer hold.
Starch
stiffens and gives body to items of
laundry, e.g. shirts, tablecloths and bed
linen.
41
Detergent
Miele recommended detergents
Miele detergents and care products have been specially designed for Miele
washing machines. They are available to order via the internet at shop.miele.com
(depending on country) or from Miele.
Miele
UltraWhite
Miele
UltraColor
Miele
Cap 
Miele
Cap 
Miele
Cap 
Cottons 


–


Cottons


–


Minimum iron
–

–


Delicates
–

–

–
Woollens 
–
–
, 
–
–
Shirts


–


Express 20
–

–

–
Dark garments/Denim
–

–

–
Separate rinse/Starch
–/–
–/–
–/–
/–
–/–
 Recommended
 Sportswear
 SilkCare
–
 Down Items
 Fabric Softener
 WoolCare
 Booster
42
Not recommended
Detergent
The recommendations apply to the temperature ranges given in the Programme
chart.
Universal
Colour
Delicates and
woollens
Special
detergent
Cottons


–
–
Cottons


–
–
Minimum iron
–

–
–
Delicates
–
–

–
Woollens 
–
–


Shirts


Express 20
–
–
–
1)
–
–
1)

Dark garments/Denim
–

–

Outerwear
–
–


 Recommended
1)
Liquid detergent
–
2)
Powder detergent
Not recommended
43
Detergent
Dispensing fabric softener and
liquid starch at the end of the
programme
Adding fabric softener or liquid
starch separately
Prepare the starch in accordance with
the manufacturer's instructions on the
packaging.
Useful tip: When adding fabric
softener, activate the Water plus Extra.
 Add fabric softener to the 
compartment or insert the
appropriate capsule.
 Add liquid starch to the 
compartment and powder or viscous
starch to the  compartment.
 Add the fabric softener or liquid
starch to the  compartment or
insert the appropriate capsule. Do
not exceed the maximum level
mark.
It will be automatically dispensed in the
final rinse. At the end of the programme
a small amount of water remains in the
fabric softener  compartment.
Starch can make the siphon tube
sticky.
If starching frequently, clean the
dispenser compartment, especially
the siphon tube, regularly.
44
 Select the Separate rinse/Starch
programme.
 Change the spin speed if necessary.
 Activate the Cap  sensor if using a
capsule.
 Touch the Start/Stop sensor.
Colour run and dye removers/dyes
 Do not use colour run or dye
removers in this washing machine.
They can cause corrosion in the
machine.
Dyes suitable for use in domestic
washing machines can be used.
However, please note that the salt used
in the dyeing process can cause
corrosion to stainless steel components
in the machine if you dye frequently.
Always observe the manufacturer's
instructions carefully.
Cleaning and care
Cleaning the drum
(Hygiene info)
Washing at low temperatures and/or
using liquid detergent can cause
bacteria and unpleasant odours to build
up in the washing machine. Use the
Cottons 90°C programme to clean the
machine. This should be done at the
latest when the indicator light  comes
on.
Cleaning the detergent
dispenser drawer
Washing at low temperatures and the
use of liquid detergent can lead to a
build-up of mould and bacteria in the
detergent dispenser drawer.
 For hygiene reasons, clean the entire
drawer at regular intervals.
External casing and fascia
panel
 Disconnect the machine from the
mains electricity supply and
withdraw the plug from the socket
before cleaning the machine.
 The washing machine must not
be hosed down.
 Clean the casing with a mild nonabrasive cleaning agent or soap and
water using a well wrung-out cloth.
Wipe dry with a soft cloth.
 The drum can be cleaned using a
suitable proprietary stainless steel
cleaning agent following the
manufacturer's instructions on the
packaging.
 Pull out the detergent dispenser
drawer until a resistance is felt. Press
down the release button and at the
same time pull the drawer right out of
the machine.
 Clean the detergent drawer with
warm water.
 Do not use solvents, abrasive
cleaners, glass cleaners or allpurpose cleaning agents. These
might damage plastic surfaces and
other components because of the
chemicals they contain.
45
Cleaning and care
Cleaning the siphon tube and the
fabric softener channel
Cleaning the detergent dispenser
drawer housing
Liquid starch can cause the siphon
to become clogged. Make sure that
you clean the siphon and siphon
tube particularly thoroughly after
using liquid starch a few times.
 Use a bottle brush to remove
detergent residues and limescale
from the jets inside the detergent
dispenser drawer housing.
 Clean the siphon.
1. Remove the siphon from
compartment  and rinse under
warm running water. Clean the
siphon tube in the same way.
2. Refit the siphon.
 Clean the fabric softener channel
using a brush and warm water.
46
 Replace the detergent dispenser
drawer.
Useful tip: Leave the detergent
dispenser drawer slightly open to allow
it to dry.
Cleaning and care
Cleaning the water inlet filter
The washing machine has two filters to
protect the water inlet valve. These
filters should be checked every six
months or so, or more often if there are
frequent interruptions to the water
supply.
Cleaning the filter in the water inlet
valve
 Using pliers, carefully loosen the
ribbed plastic nut (seal) on the inlet
valve and unscrew.
Cleaning the filter in the union in the
open end of the inlet hose
 First turn off the tap.
 Unscrew the inlet hose from the tap.
 Use pointed nose pliers to withdraw
the plastic filter by the bar (see
illustration).
 Clean the filter and the plastic nut
(seal).
 Remove the rubber seal 1 from the
recess.
 Put the filter and plastic nut (seal)
back in the reverse order and
reconnect the hose.
 Clean the filter and the seal.
After cleaning the filters, turn on the
tap and check the connections are
watertight. If water drips out, tighten
the connections.
 Put the filter and seal back in the
reverse order and reconnect the
hose.
The two filters must be put back in
place after cleaning.
 Using pointed pliers, take hold of the
plastic filter bar 2 and remove it.
47
Problem solving guide
Problem solving guide
With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting Miele. This will save time and money.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions.
 Repair work to electrical appliances should only be carried out by an
authorised Miele service technician. Repairs and other work by unqualified
persons could be dangerous. Miele cannot be held liable for unauthorised work.
The programme does not start
Problem
Possible cause and remedy
The control panel
remains dark.
There is no power to the machine.
 Check whether the mains plug is plugged in and
switched on.
 Check whether the circuit breaker has tripped.
The washing machine has switched off automatically
to save energy.
 Switch the washing machine on again by turning
the programme selector.
 and  alternately
appear in the time
display.
48
The door is not closed properly. The door lock could
not engage.
 Close the door again.
 Start the programme again.
If the fault message appears again, contact Miele.
Problem solving guide
The programme is cancelled and a fault indicator light lights up
in the control panel.
Problem
Possible cause and remedy
The fault indicator light
 lights up,  and 
appear alternately in the
time display and the
buzzer sounds.
The water inlet is blocked or restricted.
 Check whether the tap is turned on properly.
 Check whether the inlet hose is kinked.
 Check whether there is sufficient water pressure.
The fault indicator light
 lights up,  and 
appear alternately in the
time display and the
buzzer sounds.
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
 Clean the drain filter and the pump.
 The maximum drain height is 1 m.
The filter in the water inlet is blocked.
 Clean the filter.
The fault indicator light The water protection system has reacted.
 lights up,  and 
 Turn off the tap.
appear alternately in the  Call Miele.
time display and the
buzzer sounds.
 and  alternately
appear in the time
display and the buzzer
sounds.
There is a fault.
 Disconnect the washing machine from the mains
electricity supply, either by switching it off at the
wall socket and withdrawing the plug, or by
disconnecting it at the circuit breaker.
 Wait at least 2 minutes before reconnecting the
washing machine to the mains electricity supply.
 Then switch the washing machine on again.
 Restart the programme.
If the fault message appears again, contact Miele.
49
Problem solving guide
During the programme, a symbol appears in the time display
Message
Possible cause and remedy

The programme selector was moved to a different
position after the programme had started.
 Turn the programme selector back to the original
position.
lights up
The programme has been interrupted.
 Open the door.
 Close the door.
At the end of the programme, an indicator light lights up in the
control panel
Problem
Possible cause and remedy
The indicator light 
lights up.
Excessive foam has built up during washing.
 Use less detergent next time and follow the
manufacturer's instructions on dosage given on
the packaging.
The indicator light 
lights up.
A programme using a temperature above 60°C has
not been run for a long period of time.
 In order to prevent bacteria and unpleasant odours
building up in the machine, run the Cottons 90°C
programme using Miele dishwasher and washing
machine cleaner or powder detergent.
50
Problem solving guide
General problems with the washing machine
Problem
Possible cause and remedy
The washing machine
smells.
The  indicator light was ignored. A programme
using a temperature above 60°C has not been run for
a long period of time.
 In order to prevent bacteria and unpleasant odours
building up in the machine, run the Cottons 90°C
programme using Miele dishwasher and washing
machine cleaner or powder detergent.
The detergent dispenser drawer was left closed after
washing.
 Leave the detergent dispenser drawer slightly
open to allow it to dry.
The machine shakes
during the spin cycle.
The machine feet are not level.
 Level the machine and adjust the feet correctly.
The laundry has not
The machine detected an imbalance during the final
been spun properly and spin and reduced the spin speed automatically.
the laundry is still wet.
 Include both large and small items in the load as
this will give better distribution.
The pump makes
strange noises.
This is not a fault.
These slurping noises occur at the end of the pump
sequence as a normal part of operation.
Large amounts of
detergent residue
remain in the detergent
dispenser drawer.
The water pressure is too low.
 Clean the filter in the water inlet.
 It may be useful to select the Water plus Extra
option.
Powder detergent used with water softeners can
become sticky.
 Clean the detergent dispenser drawer and in future
add washing powder and then add the water
softener.
51
Problem solving guide
General problems with the washing machine
Problem
Possible cause and remedy
Fabric softener is not
completely dispensed
or too much water
remains in the 
compartment.
The siphon tube is not correctly positioned, or is
clogged up.
 Clean the siphon (see "Cleaning and care Cleaning the detergent dispenser drawer").
At the end of the
The small pipe in the detergent dispenser drawer onto
programme there is still which the capsule is placed is blocked.
liquid in the capsule.
 Clean the small pipe.
This is not a fault.
For technical reasons, a small amount of water will
remain in the capsule.
There is water next to
The Cap  sensor was not activated or an empty
the capsule in the fabric capsule was not removed at the end of the last
softener compartment. programme.
 Make sure that you remember to activate the Cap
 sensor the next time you insert a capsule.
 Remove and then dispose of the empty capsule at
the end of each programme.
The small pipe in the detergent dispenser drawer onto
which the capsule is placed is blocked.
 Clean the small pipe.
52
Problem solving guide
An unsatisfactory wash result
Problem
Possible cause and remedy
Liquid detergent does
not give the required
result.
Liquid detergents usually contain no bleaching
agents. They do not remove fruit, coffee and tea
stains.
 Use a general purpose powder detergent
containing a bleaching agent.
 Use the appropriate capsule or add stain removers
to the  compartment.
 Never put stain removers and liquid detergent
together in the dispenser drawer.
Grey, greasy particles
Insufficient amounts of detergent were used to break
cling to washed laundry. down the particles of grease in heavily soiled laundry.
 Use more detergent or liquid detergent.
 Before washing the next load, run a Cottons 60°C
programme with powder detergent but without a
load.
White residues which
look like powder
detergent are seen on
dark textiles after
washing.
The detergent contained compounds (zeolites) to aid
water softening which are not soluble in water. These
have ended up on the laundry.
 Try and brush off the residues with a soft brush
once the laundry is dry.
 Wash dark textiles using a detergent which does
not contain zeolites. Liquid detergents usually do
not contain zeolites.
 Use the Dark garments/Denim programme.
53
Problem solving guide
The door will not open
Problem
Possible cause and remedy
The door cannot be
pulled open during a
programme.
The drum is locked during a programme.
 Touch the Start/Stop sensor to cancel the
programme.
The programme is cancelled, the door unlocks and
you can pull it open.
There is still water in the drum and the machine is
unable to drain.
 Clean the drain filter and the drain pump as
described in "Opening the door in the event of a
blocked drain outlet and/or power cut".
After the programme is For safety reasons, the door cannot be opened if the
cancelled, flashing bars suds temperature is higher than 55°C.
......... appear  Wait until the temperature in the drum has
in the time display.
decreased and the bars have stopped flashing in
the display.
 and  alternately
appear in the time
display.
54
The door lock has jammed.
 Call Miele.
Problem solving guide
Opening the door in the event
of a blocked drain outlet and/
or power cut
 Switch off the washing machine.
Procedure for draining the washing
machine
When draining water from the
machine, do not unscrew the drain
filter completely or take it right out.
 Place a suitable container, e.g. a
Miele universal oven tray, under the
access panel.
 Open the drain pump access panel.
Blocked drain outlet
If the drain outlet is blocked, a large
quantity of water can remain in the
washing machine.
 If laundry has been washed at a
high temperature, water draining out
of the machine will still be hot.
Danger of scalding!
Take care when draining the suds
solution.
 Slowly and carefully unscrew the filter
to let the water out. Be careful not to
release too much water at once. If the
flow of water is too strong, some
water can seep into the washing
machine base and activate the water
protection float switch. This will
prevent the washing machine from
functioning.
 Tighten the drain filter back up again
if you need to interrupt the flow of
water.
55
Problem solving guide
Once the flow of water ceases:
Opening the door
 Always make sure that the drum
is stationary before reaching in to
remove laundry. Reaching into a
moving drum is extremely
dangerous.
 Remove the drain filter completely.
 Use a screwdriver to unlock the door
of the washing machine as shown.
 Pull open the door.
 Clean it thoroughly.
 Remove any foreign objects (e.g.
buttons, coins, etc.) and fluff from the
filter housing. Turn the impellers by
hand to check that they rotate freely.
 Replace the drain filter correctly and
tighten it securely.
 Make sure the drain filter is
securely tightened. Otherwise there
is a risk of water leakage during use.
56
After sales service
Contact in case of fault
Optional accessories
In the event of any faults which you
cannot remedy yourself, please contact
Miele.
Optional spare parts and accessories
for this washing machine are available
from Miele.
Contact information for Miele can be
found at the end of this document.
Please quote the model and serial
number of your appliance when
contacting Miele. This information can
be found on the data plate.
Warranty
The manufacturer's warranty for this
appliance is 2 years.
For further information, please refer to
your warranty booklet.
The data plate is found above the
porthole glass when the door is
opened.
57
Installation and connection
Front view
a Inlet hose (tested to withstand
pressures up to 7000 kPa)
e Detergent dispenser drawer
b Electrical connection cable
g Access to drain filter, drain pump and
emergency release
c Flexible drain hose (with detachable
swivel elbow)
d Control panel
58
f Door
h Four height-adjustable feet
Installation and connection
Rear view
a Drain hose
b Transport clips for electrical
connection cable, inlet and drain
hoses
c Electrical connection cable
d Protruding lid for holding when
moving the machine
e Inlet hose (tested to withstand
pressures up to 7000 kPa)
f Safety caps for transit bars
g Transport clips for inlet and drain
hoses and for storing transit bars
when not in use
59
Installation and connection
Installation surface
A concrete floor is the most suitable
installation surface for a washing
machine, being far less prone to
vibration during the spin cycle than
wooden floorboards or a carpeted
surface.
Please note:
 The machine must be level and
securely positioned.
 To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
If installing on a wooden joist floor:
 We recommend a plywood base (at
least 59 x 52 x 3 cm). The base
should span several joists and be
bolted to the joists and not only to the
floorboards. Check for the presence
of pipes and cables first.
Transporting the washing
machine to its installation site
 Make sure the fixings at the back
of the lid are secure.
Otherwise there is a danger of the lid
being pulled off when carrying the
appliance.
Before carrying the appliance, check
that the lid is secure where it
protrudes at the back of the
appliance.
 Carry the washing machine by the
front feet and the protruding lid at the
back.
Removing the transit bars
Useful tip: If possible, install the
machine in a corner, as this is usually
the most stable part of the floor.
 Remove the left and right covers.
1. Pull off the transit bar covers and
2. then use a screwdriver to release the
catches at the top and bottom.
60
Installation and connection
 Using the spanner supplied, turn the
left-hand transit bar 90°, then
 Turn the right-hand transit bar 90°,
then
 withdraw the transit bar.
 withdraw the transit bar.
61
Installation and connection
 To avoid the risk of injury, the
holes for the transit bars must be
covered after the transit bars have
been removed.
 Secure the transit bars to the back of
the washing machine. Make sure the
top catch is located above the holder.
 The washing machine must not
 Fit the covers onto the two holes.
be moved without the transit bars in
place. Store them as shown or keep
them in a safe place for future use.
They must be refitted if the machine
is to be moved again (e.g. when
moving house).
Refitting the transit bars
Refitting is carried out by reversing the
procedure.
62
Installation and connection
Levelling the machine
The washing machine must stand
perfectly level on all four feet to ensure
safe and proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
 Use a spirit level to check that the
washing machine is standing level.
 Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 anticlockwise using the spanner supplied
until it sits firmly up against the
housing.
 All four counter nuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is a danger of the machine
moving about.
 Using the spanner supplied, turn
counter nut 2 in a clockwise direction.
Then turn counter nut 2 together with
foot 1 to unscrew.
63
Installation and connection
Building under a continuous
worktop / in a kitchen run
 The washing machine lid cannot
be removed.
This washing machine (with lid intact)
can be pushed under a worktop if there
is space to do so.
64
Washer and dryer stack
A Miele tumble dryer can be stacked
with the washing machine. The
appropriate "WTV" stacking kit* to
match your tumble dryer is required.
All parts marked * are available from
Miele.
Please note the following:
a =
at least 2 cm
b =
WTV without drawer: 172 cm
WTV with drawer: 181 cm
c =
68 cm
Installation and connection
The Miele water protection
system
Electronic unit and washing machine
housing
The Miele water protection system
protects all parts of the washing
machine and surrounds from water
damage.
– Sump: Any leaking water is collected
in a sump in the base of the machine.
A float switches off the water inlet
valves, preventing any more water
from flowing into the machine and
water in the suds container is
pumped away.
The system consists of three main
components:
– the inlet hose
– the electronic unit and drainage and
overflow protection
– the drain hose
Inlet hose
– Protection against bursting
The inlet hose is tested to withstand
pressures up to 7000 kPa.
– Overflow protection: This prevents
the washing machine taking in too
much water. If the water level
exceeds a certain level, the drain
pump switches on and pumps the
excess water away in a controlled
way.
Drain hose
The drain hose is protected by a
ventilation system which prevents the
washing machine from being emptied
completely.
65
Installation and connection
Connection to the water supply Maintenance
The washing machine should be
connected to a mains water supply in
accordance with current local and
national safety regulations.
IMPORTANT Australia and New
Zealand
This appliance must be installed
according to AS/NZS 3500.1. Backflow
prevention is already integrated in the
appliance.
The machine is designed to operate
with a flow pressure of between 100
and 1000 kPa. If it is higher than
1000 kPa, it is essential to fit a reducer
valve.
Connection to the mains water supply
should incorporate a mains tap with ¾"
threaded union. The tap should be fitted
by a qualified plumber.
 The connection point is subject
to mains water pressure. Turn on the
tap slowly and check for leaks.
Correct the position of the washer
and union if appropriate.
The washing machine is not suitable
for connection to a hot water supply.
66
Only use a genuine Miele hose that has
been pressure tested to withstand at
least 7000 kPa should you ever need a
replacement.
A filter is located in the open end of
the inlet hose and another in the
intake point to protect the inlet valve.
Neither filter may be removed.
Hose extension
Longer hoses 2.5 m or 4.0 m in length
are available from Miele as optional
accessories.
Installation and connection
Drainage
Please note:
The suds are drained through a drain
pump with a 1 m delivery head. For the
water to drain freely, the hose must be
installed free of kinks.
If required, the hose can be extended to
a length of up to 5 m. The necessary
parts can be purchased from Miele.
For a delivery head of more than 1 m
(up to a max. of 1.8 m) a replacement
drain pump will need to be fitted.
Please contact Miele for advice.
For a delivery head of 1.8 m the hose
can be extended to a length of up to 2.5
m. The necessary parts can be
purchased from Miele.
Drain hose connection options
1. Directed into a sink or basin.
Please note:
– Hook the hose over the edge and
secure it.
– Make sure that the water can drain
away freely without hindrance.
Otherwise there is a risk of water
overflowing or of some of the
drained water being sucked back
into the machine.
a Adapter
b Washbasin nut
c Hose clip
d End of the hose
 Fit the adapter  to the sink drain
outlet using the nut .
 Attach the end of the hose  to the
adapter .
 Use a screwdriver to tighten the hose
clip  up close to the nut.
2. Connected securely to a plastic drain
pipe with a rubber nipple (there is no
need to use a siphon).
3. Connected securely to a floor drain
(gully).
4. Connected securely to a standpipe.
67
Installation and connection
Electrical connection
The washing machine is supplied with a
mains cable with moulded plug for
connection to a 230V mains supply. The
voltage, rated load and plug rating are
given on the data plate. Please ensure
these match the household mains
supply.
 The accessibility of the plug
must always be ensured in order to
separate the washing machine from
the mains. Do not connect the
appliance to an extension lead or
multi-socket adapter as they do not
guarantee the required safety of the
appliance (e.g. danger of
overheating).
All electrical work must be carried out
only by a suitably qualified and
competent person, in strict accordance
with national and local safety
regulations. For extra safety, it is
advisable to install a residual current
device (RCD), with a trip current of 30
mA. Ensure power is not supplied to the
appliance until after installation work
has been carried out. Connection
should be made via a suitable switched
socket.
If the connection cable is damaged, it
must be replaced with a Miele cable of
the same type by a Miele approved
service technician only.
68
WARNING: THIS APPLIANCE MUST
BE EARTHED
Technical data
Height
850 mm
Width
596 mm
Depth
636 mm
Depth with door open
1054 mm
Height for building under
850 mm
Width for building under
600 mm
Weight
Approx. 100 kg
Capacity
8 kg dry laundry
Voltage
See data plate
Rated load
See data plate
Fuse rating
See data plate
Consumption data
See "Consumption data"
Water flow pressure minimum
100 kPa
Water flow pressure maximum
1000 kPa
Inlet hose length
1.60 m
Drain hose length
1.50 m
Connection cable length
2.00 m
Drain pump head max.
1.00 m
Drain pump length max.
5.00 m
LEDs
Class 1
Test certificates awarded
See data plate
Power consumption when switched off
0.3 W
Power consumption when not switched 2.5 W
off
69
Consumption data
Consumption data for the nominated energy labelling
programme according to AS/NZS 2040.1 & AS/NZS 2040.2
Load
Cottons  40°C
8.0 kg
Consumption data
Energy
in kWh
Water
in litres
0.62
63
Duration
Normal Cold
Water
4 h 12 min
Notes for test institutes:
Detergent must be dispensed via the detergent dispenser drawer.
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any Extra options
selected.
70
Consumption data
Load
Energy
Water
Duration
Residual
moisture
kg
kWh
Litres
h:min
%
60°C
8.0
0.90
49
2:59
53
60°C
4.0
0.88
48
2:59
53
40°C
4.0
0.53
39
2:59
53
90°C
8.0
2.10
49
2:29
53
60°C
8.0
1.35
49
2:29
53
60°C
4.0
1.15
48
2:19
53
40°C
8.0
0.92
69
2:39
53
40°C
4.0
0.65
48
2:29
53
20°C
8.0
0.35
69
2:39
53
Minimum iron
30°C
3.5
0.35
47
1:59
30
Delicates
30°C
2.0
0.25
30
1:09
–
Woollens 
30°C
2.0
0.23
35
0:38
–
1)
40°C
3.5
0.34
30
0:20
–
60°C
2.0
0.77
40
1:31
–
Cottons 
Cottons
Express 20
Shirts
1)
Short Extra activated
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any Extras selected.
71
Programmable functions
The programmable functions are used
to alter the machine's electronics to
suit changing requirements.
Programmable functions can be
altered at any time.
Programming is carried out in 8 steps
(, ,  ... ) using buttons and
sensors.
Accessing the programming level
Before you begin, ensure the following:
– The washing machine is switched on
(the programme selector is pointing
to a wash programme).
Choosing and selecting
programmable functions
The number of the programmable
function will appear in the display as 
and a number: e.g. .
 Touch the  or  sensor to scroll to
the next or previous programmable
function:
Programmable functions

Keypad tone

PIN Code

Control panel standby status
– The washing machine door is open.
 Memory
 Touch the Start/Stop sensor and
hold it down during step .
 Longer pre-wash Cottons
 Close the washing machine door.

Soak duration
 Gentle action
Wait until the Start/Stop sensor lights
up constantly ...
 Reduce temperature
 ... and then release the Start/Stop
sensor.

Water plus

Water plus level

Maximum rinse level

Suds cooling

Anti-crease
After approx. four seconds,  will light
up in the time display.
 Backlight brightness dimmed
 Confirm the selected programmable
function by touching the Start/Stop
sensor.
72
Programmable functions
Editing and saving the
programmable function
Exiting the programming level
You can either switch a programmable
function on or off or select different
options.
The settings have been changed. You
can alter the settings again at any time.
 Touch the  or  sensor to switch
the programmable function on/off or
to select an option:
 Keypad tone
 Turn the programme selector to .
Programmable function
Options
Available options




X
O
X

O
X

X
O

O
X

O
X
X
X
O
X
X
O
X
X
O
X
X
X
X
O
X


O
X

O
X



O
X

O
X

X
O

X


Each touch of a sensor is confirmed
with an audible tone.
 – 
 = Keypad tone is switched off

= Keypad tone is switched on
(factory default setting)
X
X
X = can be selected
O = factory setting
73
Programmable functions
 PIN Code
The PIN code prevents the washing
machine being used without your
knowledge.
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Options
 = PIN code is switched off
(factory default setting)

= PIN code is switched on
Using the washing machine with a
PIN code
The code is 125 and cannot be altered.
 Switch on the washing machine.
   appears in the time display and
the  and  sensors light up.
 Touch the  sensor.
   appears in the time display.
 Confirm the number with the Start/
Stop sensor.
The first number was saved and you
can now enter the second number
using the  and  sensors.
 Enter the second and third numbers
and confirm the numbers with the
Start/Stop sensor.
The lock is released and a wash
programme can now be selected and
started.
74
 Control panel standby
status
To save energy the time display and
sensors will go out after 10 minutes,
and only the Start/Stop sensor will
flash slowly.
Options
 = Off
The time display and sensors
will remain lit up while the
washing machine is switched
on

= On (factory default setting)
The time display and sensors
will switch off after 10 minutes
if
– no further selection is made
after switching the machine
on
– the programme is started
However; the time display and
sensors will remain lit up for 10
minutes after a Delay start time
has elapsed, after the end of a
programme, or at the end of
the anti-crease phase.
Programmable functions
 Memory
The washing machine will save the
last settings (temperature, spin speed
and some of the Extras) selected for a
programme after the programme has
started.
When the programme is chosen again,
the saved settings will appear in the
display.
Options
 = Memory is switched off
(factory default setting)

= Memory is switched on
 Longer pre-wash Cottons
If you require a longer pre-wash you
can extend the pre-wash time.
Options
 = No increase in the pre-wash
time (factory default setting)

= + 6 minutes increase in the
pre-wash time
 = + 9 minutes increase in the
pre-wash time
 = + 12 minutes increase in the
pre-wash time
 Soak duration
You can set a duration for the soak
process of between 30 minutes and
2 hours.
A duration can be selected in 30-minute
increments. When the Soak Extra is
selected, the laundry will be soaked for
the duration selected.
Options

= 30 minutes soak duration
(factory default setting)
 = 1 hour soak duration
 = 1 hour 30 minutes soak
duration
 = 2 hours soak duration
 Gentle action
With gentle action activated, drum
agitation is reduced. In this way, lightly
soiled items can be washed more
gently.
Gentle action can be activated for the
Cottons and the Minimum iron
programmes.
Options
 = Gentle action is switched off
(factory default setting)

= Gentle action is switched on
75
Programmable functions
 Reduce temperature
At high altitudes water has a lower
boiling point. Miele recommends
activating the Reduce temperature
setting at altitudes of or above 2000 m
to prevent water from boiling. The
max. temperature is reduced to 80°C,
even if a higher temperature is
selected.
Options
 = The Reduce temperature
setting is switched off (factory
default setting)

= The Reduce temperature
setting is switched on
 Water plus
You can determine the amount of
water used if the Water plus Extra is
selected.
Options

= More water is used in the wash
and rinse stages (factory
default setting)
 = An extra rinse is carried out
 = The water level is increased in
the wash and rinse stages and
an additional rinse is carried
out
76
 Water plus level
There are three different water levels
which can be selected by activating
the Water plus Extra.
Options

= No higher water level (factory
default setting)
 = Water level increased by 1 level
when washing and rinsing
 = Water level increased by
2 levels when washing and
rinsing
 = Water level increased by
3 levels when washing and
rinsing
 Maximum rinse level
The water level in the rinse can be
permanently set to the highest value.
This function is important for allergy
sufferers as it achieves excellent rinse
results. The water consumption will be
increased.
Options
 = Maximum rinse level is
switched off (factory default
setting)

= Maximum rinse level is
switched on
Programmable functions
 Suds cooling
When this is activated, additional
water flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a
Cottons programme with a temperature
of 70°C or higher is selected.
 Backlight brightness
dimmed
The brightness of the dimmed sensors
in the control panel can be selected at
seven different levels.
It will change as soon as a different
setting is chosen.
Options
Suds cooling should be activated:

– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
 = brightest level
= darkest level

 = factory default setting
– where the drainage pipes do not
comply with DIN 1986.
Options
 = Suds cooling is switched off
(factory default setting)

= Suds cooling is switched on
 Anti-crease
The Anti-crease function helps prevent
creasing if laundry is not going to be
removed immediately after the end of
the programme.
At the end of the programme, the drum
continues to turn at intervals for up to
30 min. The door can be opened at any
time during the anti-crease phase.
Options
 = The Anti-crease function is
switched off (factory default
setting)

= The Anti-crease function is
switched on
77
Optional accessories
Detergent, fabric care, additives and
machine care products are available for
this machine. All the products have
been designed for Miele appliances.
These and many other useful products
can be ordered via the internet at
shop.miele.com (depending on country)
or from Miele (see end of this booklet
for contact details).
Detergent
UltraWhite
– Powder detergent
– Suitable for white and light coloured
laundry as well as heavily soiled
cotton items
– Effective stain removal even at low
temperatures
Specialist detergents
Specialist detergents are available as
capsules  in convenient single dose
amounts or in a handy bottle.
Outerwear
– Liquid detergent for outerwear and
performance clothing
– Cleans with care and is gentle on
colours
– With lanolin to care for and condition
membrane fabric
Sportswear
– Liquid detergent for sportswear and
fleece garments
– Neutralises unpleasant odours
– Retains the shape of the textiles
UltraColor
Down Items
– Liquid detergent for coloured items
– Liquid detergent suitable for pillows,
sleeping bags and down filled items
– Suitable for coloured and dark/black
items
– Protects bright colours from fading
– Effective stain removal even at low
temperatures
Woollens and delicates detergent
– Liquid detergent for delicates
– Particularly suitable for woollen and
silk items
– Cleans at temperatures as low as
20°C, helps retain the shape of
delicate items and protect colours
78
– Retains the elasticity of down and
feather filled items
– Retains the breathability of down
filled items
– Prevents down filling clumping
together
Optional accessories
WoolCare
Additives
– Liquid detergent for woollens and
delicates
Booster
– Includes a special wheat protein
conditioning formula
– Helps prevent pilling and felting
– Gentle on colours
– Only available as capsules 
SilkCare
– Liquid detergent for silks
– Contains a special silk protein
conditioning formula
– Gentle on colours
– Only available as capsules 
– For removing stains
– Suitable for white and coloured
laundry
– Available as capsules  in
convenient single dose amounts
Machine care products
Cleaning agent
– For cleaning the washing machine
thoroughly and effectively
– Removes grease, bacteria and
unpleasant odours
– Use 1–3 times per year
Fabric care
Descaling agent
Fabric care is available as capsules 
in convenient single dose amounts or in
a handy bottle.
– Removes heavy limescale deposits
Proofing agent
– For proofing microfibre fabrics, e.g.
rain coats
– Retains the breathability of garments
Fabric softener
– Fresh, natural fragrance
– Mild and gentle with natural citric
acid
Water softener tablets
– Reduces quantities of detergent for
hard water
– Less detergent residue in textiles
– Less chemicals in waste water due to
reduced amount of detergent
– Makes laundry soft to handle
79
Miele Australia Pty. Ltd.
ACN 005 635 398
ABN 96 005 635 398
Miele Experience Centre and
Head Office Melbourne:
1 Gilbert Park Drive
Knoxfield, VIC 3180
Miele Experience Centre South Melbourne:
206-210 Coventry Street
South Melbourne, VIC 3205
Miele Experience Centre and Office Sydney:
3 Skyline Place
Frenchs Forest, NSW 2086
Miele Experience Centre and Office Brisbane:
39 Harvey Street North
Eagle Farm, QLD 4009
Miele Experience Centre Gold Coast:
131 Ferry Road
Southport, QLD 4215
Miele Experience Centre and Office Adelaide:
83-85 Sir Donald Bradman Drive
Hilton, SA 5033
Miele Experience Centre and Office Perth:
205-207 Stirling Highway
Claremont, WA 6010
www.miele.com.au
Miele New Zealand Limited
IRD 98 463 631
Head Office:
Level 2, 10 College Hill
Freemans Bay, Auckland 1011
Miele Experience Centre
Auckland:
8 College Hill
Freemans Bay, Auckland 1011
Telephone:
0800 464 353 (0800 4 MIELE)
www.miele.co.nz
Miele Global Headquarters
Germany
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
Federal Republic of Germany
WDD 030

en-AU, NZ
M.-Nr. 10 832 560 / 00
Download PDF
Similar pages