CUNO Ice Machine Water Filter Replacement Cartridge HF45

3M Water Filtration Products
™
application:
SPEC#
models:
QUANTITY
ICE
ICE140-S/ICE145-S
3M™ Water Filtration Products Models ICE140-S and ICE145-S single cartridge water
filtration systems help provide consistent high quality water for commercial ice by re­
ducing the effects of sediment, chlorine taste and odor and scale at flow rates up to 2.1
gpm (7.9 lpm). Built-in scale inhibition reduces the ability of calcium and magnesium to
precipitate on the evaporator plates as hard scale.
• ICE140-S combines chlorine taste and odor reduction with cyst, bacteria1 and sedi­
ment reduction, while reducing the effects of chlorine corrosion and scale for up to
25,000 gallons (94,635 liters).
• ICE145-S combines chlorine taste and odor reduction with sediment reduction from
higher turbidity water, while reducing the effects of chlorine corrosion and scale for
up to 25,000 gallons (94,635 liters).
PRODUCT BENEFITS
• Effectively reduces sediment and chlorine taste and odor for better equipment protec­
tion and clearer, great tasting ice.
• Revolutionary Integrated Membrane Pre-Activated Carbon Technology (“IMPACT”)
dual-zone media cartridge construction combines a membrane in series with pre­
mium activated carbon to provide superior throughput and cartridge life.
• Certified by NSF to Standard 53 for cyst reduction (HF40-S replacement cartridge).
• Built-in bacteria inhibitor intended to reduce fouling of media (HF40-S replacement
cartridge).
• NSF Standard 42 and/or FDA CFR-21 compliant materials.
• Reduction of up to 99.99% of common water-borne heterotrophic bacteria by mem­
brane filtration as tested by CUNO (HF40-S replacement cartridge).
• Valve-in-head design simultaneously shuts off and vents water, allowing for simple
and virtually trouble-free cartridge change-outs without the need to shut off the
upstream feed water.
• Built-in scale inhibitor reduces lime scale build-up on evaporator plates as tested by
CUNO.
• Sanitary Quick Change (SQC) encapsulated cartridge design allows for fast and easy
cartridge change-outs with a 1/4 turn.
• 3/8” FNPT horizontal inlet and outlet ports allow direct or easily adaptable connections
to existing plumbing lines.
PRODUCT SPECIFICATIONS
Model
Number
Part
Number
Reduction
Claims
Nominal
Micron
Rating
Capacity
Service
Flow Rate
Application
Replacement
Cartridge
Sizing
ICE140-S
56162-03
Cyst, Bacteria1,
Sediment, Chlorine
Taste and Odor, Scale2
0.22
25,000 gallons
(94,635 liters)
2.1 gpm
(7.9 lpm)
Most
Standard
Water
HF40-S:
56133-05
Low Flow Cubers to 1,000 lbs. (454 kg)
High Flow Cubers to 600 lbs. (272 kg)
Flakers to 1,800 lbs. (816 kg)
ICE145-S
56162-04
Sediment, Chlorine
Taste and Odor, Scale2
3.0
25,000 gallons
(94,635 liters)
2.1 gpm
(7.9 lpm)
Higher
Turbidity
Water
HF45-S:
56133-09
Low Flow Cubers to 1,000 lbs. (454 kg)
High Flow Cubers to 600 lbs. (272 kg)
Flakers to 1,800 lbs. (816 kg)
1As tested with either E.Coli ATCC (11229) or Pseudomonas (B) diminuta ATCC (19146)
2Tested and verified by manufacturer’s laboratory
ICE140-S/ICE145-S
3M™ Water Filtration Products
SPEC#
QUANTITY
MODEL NUMBER
PHYSICAL SPECIFICATIONS
PART NUMBER
• System includes a head assembly with integral mounting bracket, pressure gauge and
a single cartridge filter.
• Inlet and outlet plumbing connections are 3/8” FNPT.
4 1/2"
(11.4 cm)
• System incorporates an internal automatic 1/4 turn shut-off valve.
4"
(10.2 cm)
• Filter cartridges are o-ring seal type.
• System maximum operating pressure of 125 psi (862 kPa) and operating temperature
of 100°F (37.8°C).
• Recommended service flow rate is up to 2.1 gpm (7.9 lpm).
• Filter cartridges incorporate a bacteriostatic carbon block filtration medium (HF40-S
replacement cartridge) and scale inhibitor.
• System materials are NSF Standard 42 and/or FDA CFR-21 compliant.
• Cartridges are sanitary in design, requiring no contact with the filter media during
cartridge change-out.
14 7/8"
(37.8 cm)
• Filter cartridges require no pre-activation.
• NSF Performance Data Sheet (PDS) is included.
• Shipping weight: 8.9 lbs. (4.0 kg) per case.
• Operating weight: 6 lbs. (2.7 kg) per case.
• Case quantity: 2.
IMPORTANT: INSTALLATION TIPS
2 3/8" (6 cm) MIN RECOMMENDED
FOR CARTRIDGE REMOVAL
WARNING: To reduce the risk associated with the ingestion of
contaminants:
• Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after
the system. Systems certified for cyst reduction may be used on
disinfected water that may contain filterable cysts. EPA Establishment
#070595-CT-001
CUNO Incorporated recommends regularly scheduled maintenance and
replacement of the filter cartridge(s) in order for the product to perform
as advertised/sold. CUNO shall not be liable for system failures due to
improper maintenance.
These installation tips are for informational purposes only and are not intended to be
used as actual installation instructions. CAUTION: To reduce the risk associated with
property damage due to water leakage:
• Read and follow Use Instructions before installation and use of this system.
• Installation and use MUST comply with all state and local plumbing codes.
• Protect from freezing, remove filter cartridge when temperatures are expected to drop
below 40°F (4.4°C).
• Do not install on hot water supply lines. The maximum operating water temperature
of this filter system is 100°F (37.8°C).
• Do not install if water pressure exceeds 125 psi (862 kPa). If your water pressure
exceeds 80 psi (552 kPa), you must install a pressure limiting valve. Contact a plumbing
professional if you are uncertain how to check your water pressure.
• Do not install where water hammer conditions may occur. If water hammer conditions
exist you must install a water hammer arrester. Contact a plumbing professional if you are
uncertain how to check for this condition.
• The disposable filter cartridge MUST be replaced every 12 months, at the rated capacity
or if a noticeable reduction in flow rate occurs.
LIMITED WARRANTY
CUNO Incorporated warrants this Product to be free from defects in material and workmanship for five (5) years from the date of purchase. This warranty does not cover
failures resulting from abuse, misuse, alteration or damage not caused by CUNO or failure to follow installation and use instructions. If the Product is defective CUNO will
replace the Product or refund your Product purchase price. CUNO will not be liable for any indirect, special, incidental, or consequential damages arising from the use of
this Product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. To obtain warranty
service, mail your request to Warranty Claims, CUNO Incorporated, 400 Research Parkway, Meriden, CT 06450. Proof of purchase (original sales receipt) must accompany
the warranty claim, along with a complete description of the Product, model number and alleged defect. This warranty gives you specific legal rights and you may have
other rights which vary from state to state, or country to country.
a 3M company
3M and CUNO are trademarks of 3M Company used under license.
NSF is a trademark of NSF International.
© 2008 3M Company. All rights reserved.
LITFS289 1210P
70020194166
Visit www.nsf.org for the
claims associated with
products that are NSF listed.
CUNO Incorporated
400 Research Parkway
Meriden, CT 06450 U.S.A.
Toll Free: 1.888.218.CUNO
Worldwide: 203.237.5541
Fax: 203.238.8701
www.cunofoodservice.com
Download PDF
Similar pages