Water - Serve Canada Food Equipment Ltd.

3M™ Water Filtration Products
High Flow Series
Recipe
Quality
Water
™
3M™ Water Filtration Products High Flow Series can meet the filtration needs of an entire foodservice establishment or address specific applications one at a time. A one-cartridge High Flow system with revolutionary Integrated
Membrane Pre-Activated Carbon Technology (“IMPACT”) media delivers Recipe Quality Water™ at a flow rate
of up to 5 gallons per minute (18.9 lpm) and accomplishes what was previously the job of a three- or four-cartridge
system. No activation steps are required, and, for most water, no pre-filter is needed. Whether your foodservice application is cold beverages, ice machines, coffee, tea, espresso, or any combination, a 3M Water Filtration Products
High Flow Series system is the one you should count on for unprecedented cyst and bacteria reduction, sediment
holding, chlorine taste and odor reduction, and scale inhibition.
The
High Flow Series
Provides
Economy
•
•
•
Ease
•
•
•
Certification
•
•
•
Performance
•
•
•
•
*Measured with E.coli.
2
Single-cartridge flow rates and capacities previously available only with
three- or four-cartridge systems.
Up to 12 month cartridge life for cartridges with Integrated Membrane Pre-Activated
Carbon Technology (“IMPACT”) media.
No need for a separate prefilter.
Fast and easy cartridge change-outs with SQC — Sanitary Quick Change —
encapsulated cartridge design.
No requirement for pre-activation of the media.
Direct or easily-adaptable connections to existing plumbing lines with NPT
horizontal inlet and outlet ports.
FDA CFR-21 and/or NSF Standard 42 compliant materials.
Certification to NSF Standard 53 for cyst reduction and reduction of 99.99 percent
of water-borne bacteria* when using 3M Water Filtration Products nylon-membrane
cartridge filters.
No exposure to contaminated media.
Recipe Quality Water for all commercial foodservice applications, including cold
beverages, ice and all brewed beverages.
Combined sediment, cyst, water-borne bacteria and scale reduction with chlorine taste and odor reduction in a single cartridge from our innovative Enhanced
Integrated Membrane Pre-Activated Carbon Technology (“IMPACT”) media.
Reduction of sediment and abrasive hard particles helps to extend the life of pumps,
valves, o-rings, and seals.
Compact manifold systems to simultaneously service multiple applications.
Table of
Contents
About 3M Purification Inc................................................................................................................ 3
3M™ Water Filtration Products in the Foodservice Arena............................................................. 4-5
Integrated Membrane Pre-Activated Carbon Technology (“IMPACT”).......................................... 6-7 Multiple-Equipment Combination Applications............................................................................. 8-9
Cold Beverage Applications...................................................................................................... 10-11
Ice Applications........................................................................................................................ 12-13
Hot Beverage Applications........................................................................................................ 14-15
Scale Reduction Applications........................................................................................................ 15
Contact information......................................................................................................... Back Cover
About 3M Purification Inc. — A Market Leading Filtration Company
3M Purification Inc. (3M Purification) is a leader in the design, manufacture, and marketing of a comprehensive
line of filtration products for the separation, clarification, and purification of fluids and gasses. Its proprietary
products are used in drinking water, healthcare, and industrial markets. 3M Purification operates manufacturing
facilities and sales offices throughout the world.
About 3M — A Global, Diversified Technology Company
Every day, 3M people find new ways to make amazing things happen. Wherever they are, whatever they
do, the company’s customers know they can rely on 3M to help make their lives better. 3M’s brands include
Scotch™, Post-it™, Scotchgard™, Thinsulate™, Scotch-Brite™, Filtrete™, Command™ and Vikuiti™. Serving
customers in more than 200 countries around the world, the company’s 67,000 people use their expertise, technologies and global strength to lead in major markets including consumer and office; display and
graphics; electronics and telecommunications; safety, security and protection services; health care; industrial and
transportation.
3
With revolutionary Integrated Membrane Pre-Activated
Carbon Technology (“IMPACT”) media for superior throughput and cartridge life, the 3M™ Water Filtration Products High Flow
Series of commercial foodservice products offers simple, effective
and easy-to-install solutions that meet the volume, water clarity and
maintenance expectations of restaurant owners, chain, fast food and
convenience store operators, supermarkets, cafeterias, and institutions.
For cold, hot, and specialty beverages, ice, or any combination of
applications, 3M Water Filtration Products has an option for you
including cyst and bacteria-reduction and filters especially constructed
for higher turbidity waters. 3M Water Filtration Products can help you
lower capital and operating costs for your foodservice operation.
For central systems
serving multiple
applications, go to
pages 8 and 9
For systems dedicated to
the improved taste, appearance, and consistency of
cold beverages, go to pages
10 and 11.
For scale reduction
applications, go to
page 15.
Steamer
4
For systems dedicated to
great tasting coffee and tea,
go to pages 14 and 15.
For systems dedicated
to cleaner, consistent,
great-tasting ice, go to
pages 12 and 13.
For systems dedicated to great
tasting espresso and iced tea,
go to pages 14 and 15.
5
3M™ Water Filtration Products High Flow Series uses revolutionary Integrated Membrane
Pre-Activated Carbon Technology (“IMPACT”) for superior cartridge life and economy.
A single filter can accomplish what was previously the job of a three- or four-cartridge
system.
The “IMPACT” media package combines a patented pharmaceutical-grade microporous membrane
and a pre-activated carbon block in a single cartridge to dramatically reduce pressure drop and
practically eliminate the need for pre-filtration. The integrated membrane provides superior sediment holding capabilities while reducing Cryptosporidium
and Giardia cysts1 and over 99.99 percent of all water-borne bacteria.2 The
polycarbon block releases virtually no carbon fines. Pre-activation of the carbon
media is not required.
Over 99.99% of E.coli bacteria are reduced by the nylon
pharmaceutical-grade membrane.
Reduce scale formation, cysts, bacteria, sediment, and chlorine taste and odor with convenience and superior performance. Stop wasting time and money on messy sump systems. By creating a single cartridge system that delivers over
864,000 8-oz cups of coffee, 432,000 16-oz soft drinks (in a 22-oz cup), or 216,000 pounds of ice (25 gallons at 100
lbs of ice) at a flow of up to 5 gallons per minute (gpm), 3M Water Filtration
Products deliver Recipe Quality Water™ while reducing filtration costs.
Large particles are captured in the top zone and smaller particles in the bottom
zone of the graded density microporous nylon membrane, providing superior
cartridge sediment-holding capacity.
FLOW
Two-Zone Membrane
Surface Area
Enhanced High Flow HF90 Cartridge Bacteria Membrane
Enhanced High Flow filters have nearly 6 times the surface area for
improved sediment filtration, reduced pressure drop and longer cartridge life.
Competitor
Cartridge Gram Life
5.0
Cartridge Throughput
New Enhanced High Flow cartridges with Integrated Membrane PreActivated Carbon Technology (“IMPACT”) show higher throughputs and
longer lifetimes. ln side-to-side tests conducted with a surrogate plugging
agent to a 25% loss in flow rate, a single HF90 cartridge averaged over 4.5
times the sediment holding capacity of competitive cartridges.
High Flow
6
High Flow
High Flow
1 NSF Standard 53
2 Measured with E.coli.
Chlorine Capacities
The high chlorine taste and odor capacities* for High Flow cartridge filters with Integrated Membrane Pre-Activated Carbon
Technology (“IMPACT”) help assure that a single HF90 cartridge
out-performs a four-cartridge system from our competitor**.
x1,000
x1,000
* at an average of 96+% reduction
** 4 Competitor cartridges each with 9,000 Gal. (34,000 Lit.) chlorine capacity
Nylon-Membrane Bacterial Reduction
Bacteria
Percent Reduction Achieved
E. coli
> 99.9989
P.fluorescens
> 99.9999
Testing results for cartridge filters with 10 square
feet (0.93 square meters) of pleated 3M™ Water
Filtration Products High Flow Series nylon membrane challenged with 10 liters of water containing organisms at >105 cfu/ml.
Cartridge Cutaway
ΠRugged polypropylene design.
 Pleated membrane design helps provide cyst and
bacteria protection and superior sediment holding
capabilities with minimal pressure drop.
Ž Carbon
block technology has more than four
times the chlorine taste and odor capacity of competitor. Also features bacteria inhibition agent for
improved hygiene.
Œ
 New enhanced pleated membrane has 6 times the
surface area of competitor (see Surface Area diagram).
 New enhanced cartridges feature a 5 micron prefilter wrap.

Ž


7
High Flow Systems for
Multiple Applications
A central system is typically more economical and easier
to install and service than dedicated systems.
Reduced scale build-up on heating
surfaces for reduced maintenance
costs and higher efficiency.
For Recipe Quality Water™ to several pieces of
equipment that require different water characteristics, use High Flow Dual Port and Dual Flow
Manifolds. Integrated Membrane Pre-Activated
Carbon Technology (“IMPACT”) systems offer cyst
and bacteria reduction.
Dual Port Systems
Two separate streams exit the High Flow system manifold providing reduced sediment and chlorine taste and
odor.
One stream supplies cold-beverage dispensers.
Proportionately-dosed scaleinhibition media is added
to the second stream from a
dedicated CFS 441 cartridge
to reduce the ability of calcium
and magnesium to precipitate
as hard scale on the evaporator
plates of an ice machine and/or
the heating coils of a coffee
brewer.
Dual Flow Systems
Dual Port and Dual Flow
Systems are engineered for high
flow rates and high capacities to
supply the benefits of individual
equipment filtration from a central location.
DP290
Two separate streams exit
the High-Flow manifold.
The first stream supplies cold beverage applications
and is filtered for reduced sediment, chlorine taste and
odor, chloramine and carries no scale-inhibition media.
The second stream carries scale-inhibition media and is
filtered to reduce sediment, providing the ice machine
with chlorinated water for biofilm control.
DF290-CL
8
Reduced sediment and scale on ice machine evaporator
plates decreases maintenance costs. Dual-Port Systems
reduce chlorine taste and odor; Dual-Flow Systems
inhibit biofilm growth by allowing chlorinated water to
flow to the ice machine.
Both Dual-Port and Dual-Flow Systems
improve the taste, appearance, and consistency of cold beverages.
High Flow Dual-Port Sizing
System
Model*
Part
Number
Number of
Cartridges
Flow Rate
gal/min
(lit/min)
DP190
56243-01
1
5 (18.9)
DP290
56242-01
2
10 (37.8)
DP390
56241-02
3
15 (57.8)
High Flow Dual-Flow Sizing
System
Model*
Part
Number
Number of
Beverage
Cartridges
Number
of Ice
Machine
Cartridges
Beverage
Flow
gal/min
(lit/min)
Ice-Machine
Flow
gal/min
(lit/min)
DF290-CL**
56236-01
2
1
2.66 (10.2)
5 (18.9)
*
**
System offers cyst and bacteria reduction with Integrated Membrane Pre-Activated Carbon Technology (“IMPACT”) media
The carbon in DF290-CL reduces chloramine and chlorine
9
Cold Beverage
Water Filtration
with
High Flow Systems
Cold beverages are often the most profitable part of convenience stores, restaurants and quick-service operations.
For these high-volume cold beverage applications, High Flow filters deliver enough Recipe Quality Water™ to
make more than 432,000 soft drinks (16 oz. soft drinks in 22 oz. cups) with a single cartridge. High Flow cartridge
filters deliver the improved performance of Integrated Membrane Pre-Activated Carbon Technology (“IMPACT”)
media.
A single cartridge High Flow system replaces three- or four-cartridge manifolds, lowering capital and operating
costs.
For Beverage Water, High Flow Filtration Provides:
• Reduced sediment and chlorine taste and odor for cold beverage quality, consistency,
and customer satisfaction.
• Reduced sediment and abrasive hard particles to help extend the life of pumps, valves,
o-rings, and seals.
• Reduced numbers of microorganisms, including Cryptosporidium and Giardia cysts
(per NSF Standard 53) and water-borne bacteria such as E.coli. (Depends upon
model)
• Virtually no need for an additional pre-filter with High Flow Systems.
10
High total dissolved solids (TDS) can
cause cloudy and unappealing beverages
Excess sediment can cause abrasion
and short life on pumps, seals, o-rings
and valves
Larger Systems
Dual and Triple-Manifold systems are available
for larger flow requirements. Please inquire.
Excess chlorine can cause
unpleasant tasting beverages
Sizing
Flow Rates
System
Model
Number
Part
Number
Micron
gal/
min
BEV130
56161-01
0.5
BEV135
56161-02
BEV140
Capacity
lit/min
Carbonator
Dispensers
Gallons
Liters
Repl.
Cart.
1.67
6.3
Single
14,000
53,000
HF30
56151-05
•All systems deliver reduction of sediment
and chlorine taste & odor.
1.0
1.67
6.3
Single
12,600
48,000
HF35
56152-05
56162-01
0.2
2.1
7.9
Single High
Flow
25,000
95,000
HF40
56133-03
•BEV130/135 contain carbon-block media
only.
BEV145
56162-02
3.0
2.1
7.9
Single High
Flow
25,000
95,000
HF45
56133-07
BEV160
56163-01
0.2
3.34
12.6
Double/Two
35,000
132,000
HF60
56134-03
BEV165
56163-02
3.0
3.34
12.6
Double/Two
35,000
132,000
HF65
56134-07
BEV190
56164-01
0.2
5.0
18.9
Up to
5 gal/min
54,000
204,000
HF90
56135-03
BEV195
56164-02
3.0
5.0
18.9
Up to
5 gal/min
54,000
204,000
HF95
56135-07
•BEV140, BEV160, BEV190 sytems
include Integrated Membrane PreActivated
Carbon
Technology
(“IMPACT”) media for cyst and bacteria
reduction.
•For higher turbidity waters, the media in
BEV135, BEV145, BEV165 and BEV195
systems are specially designed to provide
cartridge and system life, but not cyst or
bacteria reduction.
11
High Flow Systems Ice
Filtration Systems
The ice machine is the backbone of the foodservice industry. Whether it’s serving drinks or keeping food fresh, large
amounts of ice are key to quality service. If you’re looking for cleaner, clearer, consistently, great tasting ice — with
reduced Cryptosporidium and Giardia cysts (per NSF Standard 53) and water-borne bacteria such as E.coli — look no
further than 3M™ Water Filtration Products High Flow Series Systems
High Flow Filters for Ice Offer:
• Reduced sediment and chlorine taste and odor for cleaner ice taste, clarity, consistency and customer satisfaction.
• Reduced chlorine taste and odor helps prevent the effects of chlorine corrosion of metal surfaces.
• Reduced sediment and abrasive hard particles help extend the life of pumps, valves, o-rings and
seals.
• Reduced downtime and service calls with the built-in delivery of a scale inhibitor to reduce the
ability of calcium and magnesium to precipitate on the evaporator plates as hard scale.
• Integrated Membrane Pre-Activated Carbon Technology (“IMPACT”) media packages in Models
ICE140, 160 and 190 result in the reduction of microorganisms, including Cryptosporidium and
Giardia cysts (per NSF Standard 53) and water-borne bacteria such as E.coli. Membrane-cartridge
challenge testing with P.fluorescence and E.coli demonstrated over 99.99% reductions of both
organisms.
• No need for a separate pre-filter.
Sizing
Flow Rates
System
Model
Number
Part
Number
Micron
ICE120-S
56160-03
ICE125-S
High Flow
Cubers
Pounds
(Kg) To
Low Flow
Cubers
Pounds (Kg)
To
Flakers
Pounds (Kg)
To
gal/min
lit/min
0.5
1.5
5.7
200
(91)
750
(340)
56160-04
1.0
1.5
5.7
200
(91)
ICE140-S
56162-03
0.2
2.1
7.9
ICE145-S
56162-04
3.0
2.1
ICE160-S
56163-03
0.2
ICE165-S
56163-04
ICE190-S
Capacity
Repl. Cart.
Gallons
Liters
1,200
(544)
9,000
34,000
HF20-S
56151-03
750
(340)
1,200
(544)
10,000
38,000
HF25-S
56152-03
600
(272)
1,000
(454)
1,800
(817)
25,000
95,000
HF40-S
56133-05
7.9
600
(272)
1,000
(454)
1,800
(817)
25,000
95,000
HF45-S
56133-09
3.34
12.6
1,000
(454)
1,450
(658)
2,400
(1,089)
35,000
132,000
HF60-S
56134-05
3.0
3.34
12.6
1,000
(454)
1,450
(658)
2,400
(1,089)
35,000
132,000
HF65-S
56134-09
56164-03
0.2
5.0
18.9
>1,000
(454)
>1,450
(658)
>2,400
(1,089)
54,000
204,000
HF90-S
56135-05
ICE195-S
56164-04
3.0
5.0
18.9
>1,000
(454)
>1,450
(658)
>2,400
(1,089)
54,000
204,000
HF95-S
56135-09
ICE260-S
56245-03
0.2
6.68
25.3
2,400
(1089)
3,000
(1,361)
4,800
(2,177)
70,000
265,000
(2) HF60-S
56134-05
ICE265-S
56245-04
3.0
6.68
25.3
2,400
(1089)
3,000
(1,361)
4,800
(2,177)
70,000
265,000
(2) HF65-S
56134-09
12
ICE190-S
• All systems deliver reduction of sediment and chlorine
taste & odor.
• ICE120-S and ICE125-S contain carbon-block media only
Excess sediment particles
can clog distribution tubes
and solenoid valves.
• ICE140-S, ICE160-S, ICE190-S and ICE260-S systems
include Integrated Membrane Pre-Activated Carbon
Technology (“IMPACT”) media for cyst and bacteria
reduction.
• For higher turbidity waters, the media in ICE145-S,
ICE165-S, ICE195-S and ICE265-S systems are specially
designed to provide cartridge and system life, but not cyst
or bacteria reduction.
Larger Systems
Scale build-up on evaporator plates can significantly increase maintenance costs.
Dual and Triple-Manifold systems are available for larger flow
requirements. Please inquire.
Excess chlorine residual
can cause chlorine smell
and corrosion in ice bins.
ICE260-S
13
Dedicated Systems for
Coffee, Tea and Espresso
3M Water Filtration Products High Flow Series filters for hot beverage applications reduce excess chlorine taste
and odor, sediment and organic residuals that cause bitter tasting coffee, espresso or tea and clog spray heads. If
not filtered these residuals can wreak havoc on your equipment and lead to expensive replacement costs.
When scale build-up is an issue, High Flow BREW Systems add scale inhibitors to help prevent the precipitation
of calcium and magnesium that can significantly decrease efficiency and increase maintenance costs.
High Flow ESP and ScaleGARD™ Pro (SGP) systems reduce calcium and magnesium ions by ion exchange for
crystal clear iced tea and for perfect bean extraction for espresso and espresso-based beverages. Turn to 3M Water Filtration Products for superior flavor, consistency and customer satisfaction.
Systems For Coffee, Tea And Espresso:
•  BREW systems add scale inhibitors for improved scale reduction.
•  ESP and SGP systems soften water for espresso without the need for a drain, electrical connections, or salt
regeneration.
•  I ncorporate a valve-in-head design and Sanitary Quick Change cartridge convenience for fast and easy cartridge change-outs. Inlet water is turned off automatically when the cartridge is replaced.
SCALE
ScaleGard™ SF165 helps protect steamers, coffee brewers, and ice machines
from the effects of scale formation at temperatures up to and exceeding
200ºF (93ºC). The SF18-S scale feeder carefully meters the right proportion
of high-temperature scale inhibitor into water filtered through an 3M Water
Filtration Products High Flow Series cartridge with Integrated Membrane
Pre-Activated Carbon Technology (“IMPACT”) media. The SF18-S scale
feeder may be purchased separately.
SF165
14
Systems And Sizing —
Softening Cartridge Systems For Espresso
Resin
Type
Model
Part
Number
SAC1
ESP114-T
ESP124-T
WAC2
Flow Rate
Scale build-up on sensors and
heating coils can significantly
increase maintenance costs
Capacity3
(grains of
hardness)
gpm
lpm
56176-09
56176-10
0.5
1.9
700
1,100
SGP124BN-T
56176-03
0.5
1.9
4,440
WAC
SGP165BN-T
56176-01
1.0
3.8
6,470
WAC
SGP195BN-T
56176-02
1.0
3.8
10,800
Excess sediment can clog spray
head in the brew basket
Excess chlorine and organic
residual can cause bittertasting beverages
•Inlet/outlet fittings are 3/8-inch FNPT
1
Strong-acid (SAC) ion exchange cartridges reduce calcium and
magnesium ions in the brewing water, replacing them with sodium
ions for better-tasting espresso
2
Weak-acid (WAC) ion-exchange cartridges replace positive ions
(calcium and magnesium and others) in the brewing water with
hydrogen ions. A 25% bypass is built-in.
3
To calculate capacities in gallons, divide the grain capacity by
the hardness of the inlet water in grains per gallon or liter. WAC
capacities are approximate, and throughputs need to be adjusted
higher to account for the 25% bypass.
Systems And Sizing —
Coffee And Tea1
Flow Rates
System
Model
Number
Part
Number
Micron
BREW105-MS
62138-01
BREW110-MS
Capacity
Number of
1/2 Gal
(2 liter)
Pots
Number of
12 oz.
(356 ml)
Cups of Tea
Repl.
Cart.
gal/min
lit/min
Gallons
Liters
1.0
0.75
2.8
1,500
5,700
3,000
16,000
HF05-MS
56093-27
62138-03
0.5
1.0
3.8
3,500
13,200
7,000
37,000
HF10-MS
56093-29
BREW115-MS
62138-07
5.0
5.0
18.9
3,500
13,200
7,000
37,000
HF15-MS
56093-31
BREW120-MS
56160-01
0.5
1.5
5.7
9,000
34,000
18,000
96,000
BREW125-MS
56160-02
1.0
1.5
5.7
10,000
38,000
20,000
107,000
HF25-MS
56152-09
BREW130-MS
56161-03
0.5
1.67
6.3
14,000
53,000
28,000
150,000
HF30-MS
56151-11
BREW135-MS
56161-04
1.0
1.67
6.3
12,600
48,000
25,200
134,000
HF35-MS
56152-11
HF20-MS
56151-09
Systems And Sizing —
Scale Reduction
Capacity
Model
Part Number
SF165
SF18-S
Flow Rate
gal
lit
gpm
lpm
56246-01
35,000
132,000
3.34
12.6
56077-03
35,000
132,000
to 5
to 18.7
Sizing
Coffee Brewers, Ice Machines, and Steamers to
Demand flow rates of 3.34 gpm (12.6 lpm)
•Periodic acid de-liming is recommended for steamer applications
15
Visit www.nsf.org for claims associated
with products that are NSF listed.
Recipe
Quality
Water
™
3M Purification Inc.
400 Research Parkway
Meriden, CT 06450, U.S.A.
Tel (800) 222-7880
(203) 237-5541
Fax (203) 238-8701
www.3Mpurification.com
3M, Scotch, Post-it, Scotchgard, Thinsulate, Scotch-Brite,
Filtrete, Command and Vikuiti are trademarks of 3M Company.
ScaleGARD, and Recipe Quality Water are trademarks of 3M
Comany used under license.
NSF is a trademark of NSF International.
© 2010 3M Company. All rights reserved.
Please recycle. Printed in U.S.A.
70-0201-9434-9
REV 0410
Download PDF
Similar pages