Commissioning, Programme chart and Settings PT 7135 C

Commissioning,
Programme chart and Settings
PT 7135 C Vario
To avoid the risk of accidents or
damage to the machine, it is
essential to read these instructions
before it is installed, commissioned
and used for the first time.
en - GB
M.-Nr. 09 871 180
Contents
Commissioning the tumble dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Basic programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Household . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Small businesses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Professional cleaners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Special programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Settings/Supervisor level menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
To open the Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
To open the Settings menu via the Supervisor level . . . . . . . . . . . . . . . . . . . . . . . 22
Language J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Sort languages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Language menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Supervisor level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Anti-crease. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Display contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Display brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Extended cool down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Temperature unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Drying levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cottons drying levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Minimum iron drying levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Automatic drying levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Machine iron drying levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Clean out airways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Clean condenser unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Display res. moisture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Delay start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Logo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
2
Contents
Target groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Demo programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Special programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Settings which can only be changed during the commissioning process . . 33
Payment system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Coin mechanism lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Signal to pin 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
T-max exceeded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Duration cool air. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Cool air free . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Duration hot air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Supervisor level code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3
Commissioning the tumble dryer
Before using for the first time
,Before commissioning the tumble dryer, ensure that it
is correctly installed and connected. Read the separate
Operating and installation instructions as well as this
booklet.
The commissioning process must be carried out in full to
determine the settings for daily operation.*
* Some settings can only be altered during the
commissioning process. After that, these can only be
changed by a Miele service technician.
Setting the language J
Settings
#eština
Language F
dansk
deutsch
english
H
^ Turn the multi-function selector to highlight the language of
your choice.
^ Press the multi-function selector to confirm your choice of
language.
Use this language?
OK
Back A
H
H
^ Turn the multi-function selector to select OK, and confirm
by pressing the multi-function selector.
If you wish to select a different language:
^ Select and confirm back.
4
Commissioning the tumble dryer
To set the time of day
The time may already have been set at the factory. If it has,
and is correct, you can skip this section. It is possible to alter
the time at any stage via the Settings menu.
Settings
Back A
Time of day
24 h clock...
12 h clock...
Time not displayed
^ Confirm either 24 h or 12 h. If you confirm Time not
displayed, the following step will be skipped.
9 : 00
Set the time of day
^ Turn the multi-function selector to select the hour and press
it to confirm your selection.
^ Then set the minutes.
^ Pressing the multi-function selector again saves the time of
day in memory.
5
Commissioning the tumble dryer
Determining target groups
By selecting target groups you are determining the
programme range of the washer-disinfector. You can see
which programmes are assigned to each target group
under "Programme chart" later in this booklet.
Settings
§ Small businesses
Target groups
~ Professional cleaners
V
~ Special programmes
Confirm selection
^ Use the multi-function selector to select and confirm none,
one or several of the target groups, as required.
– A target group selected will be indicated with a tick: 9.
– Mark the target group programmes that you have selected
with a cross in the box 8.
Household
Small businesses
8 Professional cleaners
8 Special programmes
8
8
The target group programmes selected will be added to the
basic programmes.
^ Once you have made your selection, select Confirm
selection and press the multi-function selector to confirm
your choice.
6
Commissioning the tumble dryer
Payment system
Each of these settings must now be
confirmed (and altered if required).
More details about the settings are
given at the end of this booklet.
Place a cross in the box 8 to
indicate your selection, or fill in the
gaps _____ as required.
Settings for coin operation.
8
All additional settings are skipped.
Continue with "Code Supervisor
level".
8
8
Step _____ (1 to 10)
Timed operation
The machine is coin operated using
a time meter.
Display brightness
Can be altered in 10 graduated steps.
Programme operation
The machine is operated using a
coin box.
Display contrast
Can be altered in 10 graduated steps.
No coin box
8
RS 232
When the tumble dryer is
coin-operated, serial interface RS
232 is activated (optional
accessory).
Step _____ (1 to 10)
8
IK6
When the tumble dryer is
coin-operated, serial interface RS
232 is activated for IK6.
Additional settings "Payment
system/Coin box"
– Coin mechanism lock
Time in which settings can be altered
without losing coins.
Off
Immediately after starting
(the programme)
8 _____ minute(s) after starting
(the programme)
8
8
(pto)
7
Commissioning the tumble dryer
– Signal to pin 7
Setting the feedback signal for the
coin box.
Programme end
Release the start button
8 Start and programme end
8
8
– T-max exceeded
Setting a security time margin to
prevent the coin box being tampered
with.
8
Supervisor level code
The Settings/Supervisor level menu can
be locked with a code to prevent it
being accessed by unauthorised
personnel (the Language J setting can
still be altered).
^ Select the option you want.
8
Only some of the settings can be
changed (temporary Language
setting, Anti-crease, Buzzer, Time of
day, Contrast, Brightness, Standby,
Extended cool down, Memory and
Temperature unit).
_____ minutes
– Duration cool air
This determines the maximum
programme duration in control
options WS short cut keys, ex/int time
.
8
_____ minutes
– Cool air free
The programme can be started
without payment.
8
8
On
Off
– Duration hot air
This determines the maximum
programme duration in control
options WS short cut keys, ex/int
time.
8
8
_____ minutes
Code not required
These settings can be changed by
any user.
8
Code required
A code must be entered in order to
change the settings. All settings (see
Settings menu) can be changed.
Select this option if you want users to
only be able to change settings via a
code.
Commissioning the tumble dryer
To repeat the commissioning process
If you are not certain that all of the settings are correct, you
will need to repeat the commissioning process.
i
Set up successful
OK
Back A
H
H
^ Select Back and confirm your selection.
To finish the commissioning process
– 1. Confirm
If you are sure that all of the settings are correct.
i
Set up successful
OK
Back A
H
H
^ Confirm with OK.
1
Cottons
Programme selection ...
2
Minimum iron
Settings F ...
3
Woollens handcare
4
Smoothing
10:00
The entry menu will appear (example).
9
Commissioning the tumble dryer
– 2. Start a cool air programme
To complete the commissioning process, a programme cycle
using cool air (Cool air or Timed drying cool air) needs to be
started.
If the power to the tumble dryer is switched off before the
first programme is started (e.g. by pressing the K button),
the commissioning process can be repeated. The
commissioning process is only completed once the first
programme cycle (at least 20 minutes) has finished.
^ Select a cool air programme and confirm your selection.
The menu for the cool air programme appears.
^ Press the flashing Start button.
After this programme has finished, the tumble dryer is ready
for use.
10
Programme chart
Basic programmes
(Factory default)
Cottons t **
Max. load 6.5 kg*
Use for
Normal wet cotton laundry, as described in Cottons Normal .
Notes
– Items are dried to a "Normal" level only.
– Cottons t is the most energy-efficient programme for
drying normal wet cotton laundry.
max. 6.5 kg*
Cottons
Extra dry, Normal+, Normal
Fabric type
– Single and multi-layered cotton fabrics such as:
– Towelling, T-shirts, underwear, flannelette bed linen and
baby clothes.
– Workwear, jackets, cotton blankets, aprons, face flannels,
tea towels, bed linen, towels, table linen that can be
washed hot, overalls.
Note
– Select Extra dry for multi-layered and very thick fabrics.
– Do not use Extra dry for loopknit fabrics (e.g. T-shirts,
underwear, baby clothes), as they have a tendency to
shrink.
Low temperature Select for fabric with the r symbol.
Hand iron r, Hand iron rr, Machine iron
Fabric type
– Cotton or linen fabrics
– Table linen, bed linen, starched laundry.
Note
– To prevent laundry from drying out, it should be rolled up
until you are ready for ironing.
Low temperature Select for fabric with the r symbol.
max. 3.5 kg*
Minimum iron
Normal+, Normal, Hand iron r
Fabric type
– Minimum iron cotton, synthetic and mixed fibre fabric.
– Workwear, overalls, pullovers, dresses, trousers, table linen
Low temperature Select for fabric with the r symbol.
*
Weight of dry items
** Note for test institutes:
Test programme in accordance with regulation 392/2012/EU measured according to EN 61121
11
Programme chart
Woollens handcare
max. 2.5 kg*
Fabric type
– Woollen garments.
Note
– This programme only fluffs up woollen garments. They are
not dried completely by this programme.
– Remove garments as soon as the programme has finished
and leave to finish drying at room temperature.
max. 3 kg*
Smoothing
Fabric type
– Cotton and linen fabric.
– Minimum iron mixed fibre, cotton or synthetic fabrics,
trousers, anoraks, shirts.
Note
– Smooths out creasing caused during the spin cycle in the
washing machine.
– Remove garments as soon as the programme has finished
and leave to finish drying at room temperature.
Cool air (10-120 min)
Fabric type
max. 6.5 kg*
– Any item which only needs airing.
Hot air (15-60 min)
max. 6.5 kg*
Fabric type
– Multi-layered fabrics whose layers have different drying
characteristics,
– Voluminous items e.g. jackets, pillows.
– For drying individual items.
– Bath towels, swimwear, tea-towels.
Note
– Do not select the longest drying time to start with. Check
the items as you are drying them to find the optimum time.
Low temperature Select for fabric with the r symbol.
max. 3.5 kg*
Denim
Normal, Hand iron r
Fabric type
– Denim garments, e.g. jeans, jackets, skirts, shirts.
max. 2.5 kg*
Shirts
Normal, Hand iron r
Fabric type
*
Weight of dry items
12
– Shirts and blouses.
Programme chart
max. 3.5 kg*
Outerwear
Normal, Hand iron r
Fabric type – Outerwear which is suitable for drying in a tumble dryer.
max. 2.5 kg*
Proofing
Normal
Fabric type – For drying microfibre fabrics, skiwear, fine, closeweave cotton
garments (poplin) or tablecloths which are suitable for drying in a
tumble dryer and have been treated to provide a water and dirt
resistant finish.
Note
– This programme includes a proofing agent fixing phase.
– Only use proofing agents containing fluorochemical compounds
which are stated by the manufacturer as being "suitable for use
on membrane textiles".
– Fire hazard. Do not dry items which have been treated with
proofing agents containing paraffin.
max. 4 kg*
Delicates
Normal+, Normal, Hand iron r
Fabric type – Delicate cotton, synthetic and mixed fibre fabrics.
– Thin pullovers, dresses, trousers, overalls, table cloths, shirts,
blouses.
– Lingerie and appliqu d fabrics.
Note
– Low creasing.
Towelling
max. 6.5 kg*
Normal+
Fabric type – Large quantities of single-layer and multi-layer towelling items.
– Towels, dressing gowns, face flannels, towelling bedding.
*
Weight of dry items
13
Programme chart
Silks handcare
max. 1.5 kg*
Fabric type – Silks, e.g. blouses and shirts.
Note
– Smooths out creasing.
– Remove garments as soon as the programme has finished and
leave to finish drying at room temperature.
max. 2.5 kg*
Reactivate
Normal
Fabric type – Outerwear which is suitable for drying in a tumble dryer.
Note
– Makes the fibres more water-repellant.
max. 2.5 kg*
Pillows
Normal
Items
*
– Feather or down pillows.
– Quantity: 2 pillows 80x80 cm
Weight of dry items
14
Programme chart
Basket programmes (20-90 min)
Note
– The drying basket (optional
accessory) must be in place when
items are dried or aired using this
programme.
– To prevent the risk of damage when
the drum rotates, do not place large
items which could come into contact
with the drum or drum ribs in the
drying basket (e.g. knee length boots, large bags or rucksacks).
– Sleeves, belts and ties should be folded in or secured so that
they are fully contained within the drying basket.
– Use this programme to dry items which are suitable for drying in
a tumble dryer but which are not suitable for drying using
mechanical action.
– It is essential to observe the operating instructions for the drying
basket.
Fabric type/ – See the operating instructions supplied with the drying basket.
items
Basket - Std. temp.
max. load in the basket 3 kg
– For thermally stable textiles / items
Basket - Low temp.
max. load in the basket 3 kg
– For thermally sensitive textiles / items
Household
max. 3.5 kg*
Automatic
Normal+, Normal, Hand iron r
Fabric type
*
– Mixed loads of garments suitable for the Cottons and Minimum
iron programmes. Sort according to colour.
Weight of dry items
15
Programme chart
Small businesses
max. 6.5 kg*
Cottons
Dry plus, Dry 0 % residual moisture
Fabric type
– Single and multi-layered cotton fabrics such as:
– Towelling, T-shirts, underwear, flannelette bed linen and baby
clothes.
– Workwear, jackets, cotton blankets, aprons, face flannels, tea
towels, bed linen, towels, table linen that can be washed hot,
overalls.
Note
– Select Dry plus for multi-layered and very thick fabrics.
– Do not use Dry plus for loopknit garments (e.g. T-shirts,
underwear, baby clothes), as they have a tendency to shrink.
Low
temperature
Select for fabric with the r symbol.
Damp 20% residual moisture, Damp 25% residual moisture, Damp 40%
residual moisture
Fabric type
– Cotton or linen fabrics
– Table linen, bed linen, starched laundry.
Note
– To prevent laundry (with 40% residual moisture) from drying
out, it should be rolled up until you are ready for ironing.
Low
temperature
Select for fabric with the r symbol.
Minimum iron
max. 3.5 kg*
Dry 0% residual moisture, Damp 10% residual moisture, Damp 20% residual
moisture
Fabric type
– Minimum iron cotton, synthetic and mixed fibre fabric.
– Workwear, overalls, pullovers, dresses, trousers, table linen
Low
temperature
Select for fabric with the r symbol.
max. 2.5 kg*
Woollens
Fabric type
– Woollen garments.
Note
– Items are dried and aired briefly.
– Remove garments as soon as the programme has finished and
leave to finish drying at room temperature.
*
Weight of dry items
16
Programme chart
Timed drying hot air (20-60 min)
max. 6.5 kg*
Fabric type
– Multi-layered fabrics whose layers have different drying
characteristics,
– Voluminous items e.g. jackets, pillows.
– For drying individual items.
– Bath towels, swimwear, tea-towels.
Note
– Select Low temperature for fabrics with the r symbol.
– Do not select the longest drying time to start with. Check
the items as you are drying them to find the optimum time.
Low temperature Select for fabric with the r symbol.
Timed drying hot air (15-120 min)
Fabric type
*
max. 6.5 kg*
– Any item which only needs airing.
Weight of dry items
17
Programme chart
Professional cleaners
WetCare sensitive
Items
– For non washable garments
Note
– Items are dried and aired briefly.
WetCare silks
Items
– For non washable garments which crease easily.
Note
– Items are dried to a "Machine iron" level.
WetCare intensive
Items
– Washable garments
Note
– Items are dried to a "Normal" level.
*
Weight of dry items
18
max. 2.5 kg*
max. 2.5 kg*
max. 2.5 kg*
Programme chart
Special programmes
You can create 5 special programmes
and name these. Enter their details in
the table below.
Example: Dry+
Residual moisture programme
– Final residual moisture
level:
– Additional drying time:
– Temp. of air in dryer:
Max. load: max. 6.5 kg*
(1)
–
–
–
(2)
–
–
–
-6 %
30 min
60°C
(3)
–
–
–
(4)
–
–
–
(5)
–
–
–
*
Weight of dry items
Note
The 5 special programmes have been
pre-programmed with basic parameters
at the factory: See "Settings/Supervisor
level menu".
19
Changing default settings
Default settings can be altered to
adapt the tumble dryer to different
requirements.
Depending on the programmable
status, the Settings/Supervisor level
menu can be locked with a code to
prevent it being accessed by
unauthorised personnel (the Language
J setting can still be altered).
– Code not required
Some of the settings may be
changed.
– Code required
All of the settings may be changed.
Please contact Miele for details.
Note:
The tumble dryer must be
commissioned as described at the
beginning of this booklet.
20
Settings/Supervisor level menu
To open the Settings menu
If the Settings menu is not locked, some of the settings may
be changed.
1
Cottons
Programme selection ...
2
Minimum iron
Settings F ...
3
Woollens handcare
4
Smoothing
10:00
^ Select Settings J from the entry menu and confirm your
selection with the multi-function selector.
To select a setting
Settings
Back A
Language F
Anti-crease
Buzzer
H
^ Select the setting you want to change, and confirm your
selection.
To close the Settings menu
^ Select Back and confirm your selection.
The display will revert to the entry menu.
21
Settings/Supervisor level menu
To open the Settings menu via the Supervisor level
The Settings menu can be locked against unauthorised use
(the Language J can still be changed). It will then only be
able to be accessed at Supervisor level by entering a
code.
Settings
Back A
Supervisor level
Access via code...
Change code
^ Select Access via code and confirm your selection.
Enter code
Enter the digits 0 0 0 (factory default setting). If you enter the
code wrongly three times, the tumble dryer will lock out for an
hour.
0
_
_
Enter code
^ Turn the multi-function selector until the first number
appears. Then press it to confirm your selection of this
number.
^ Repeat the process until all three numbers have been
entered.
After you have entered the last number you need to confirm
the code:
0
0
0
Confirm code
OK
H
^ Confirm the code.
^ The Supervisor level is now accessed.
22
Back A
H
Settings/Supervisor level menu
Language J
The display can be set to appear in
one of several different languages.
To select the language you want, go to
the Language J sub-menu.
^ Select the language you want and
confirm your selection.
The flag after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
The different language setting will only
apply to the programme currently in
use. After the programme has finished
the display will revert to the default
language which was set in the
Settings/Supervisor level menu.
If after setting a new language no
further entries are made for approx. 15
seconds the display will revert to the
previously set language.
Sort languages
Language menu
You can select whether you want an
additional welcome screen asking for
a language to be selected to appear
again after the end of a programme
and before the entry menu.
There are three options:
– National
(factory default)
No additional welcome screen.
– International
The welcome screen will appear and
the language must then be selected.
Any available language can be
selected. Follow the Sort languages
setting.
– International, 4 langs.
The welcome screen will appear and
the language must then be selected.
One of four languages can be
selected. Follow the Sort languages
setting.
You can select the order that you
want the first 4 languages available
to appear in in the display if you have
first selected the International or
International, 4 langs. option from the
Language menu in the Settings
menu.
^ Select the position of the language
which is to be moved.
^ Select and confirm the new
language.
23
Settings/Supervisor level menu
Supervisor level
You can alter the access code to the
supervisor level.
^ Enter the current code.
^ Enter a new code.
After you have confirmed the new code,
the display will change to the beginning
of the Settings menu.
Anti-crease
At the end of the programme the
drum will continue to rotate at
intervals for two hours to prevent
laundry creasing, if you do not wish
to remove it immediately.
– Factory default: Off.
– 1h
– 2h
Favourites
Buzzer
12 programmes can be individually
sorted according to priority.
This setting is only valid for WS-shortcut
keys + Logo control option.
^ Select the position of the programme
which is to be moved.
^ Select a new programme.
^ Confirm Save.
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme.
– Off
(factory default)
The buzzer will still sound if there is a
fault even if it has been deactivated.
– Normal
The buzzer sounds at the end of a
programme.
– Loud
The buzzer sounds at maximum
volume at the end of a programme.
24
Settings/Supervisor level menu
Time of day
First select whether you want the
clock displayed as a 24 hour or 12
hour clock, or to not display it at all.
Then set the current time of day.
– 24 h clock or 12 h clock
Once the clock display has been
selected, the time of day can be set.
To set the time (of day):
^ Use the multi-function selector to
select the current hour and confirm
your selection.
^ Use the multi-function selector to
select the current minutes and
confirm your selection.
– Time not displayed
If Delay start is activated (see
Settings Delay start), then the timer
will only show the option Start in or
Finish in in hours/minutes.
Display contrast
Display brightness
There are ten different display
contrast and display brightness
settings.
Standby
To save energy, the display goes out
after 10 minutes and the indicator
light for the Start button flashes
slowly.
The display is switched on again by
touching the multi-function selector or
one of the short-cut buttons, without
any effect on any programme that is
running.
– On
Standby comes on:
. . . if a programme is not selected.
. . . after the Start button has been
pressed in a programme that is
running.
. . . after the end of a programme.
– Not in current programme
(default setting)
Standby is switched on if no
programme selection is made after
the end of a programme.
– Off
The display remains on all the time.
Please note:
This setting results in increased
energy consumption.
The bar chart shows you the setting.
– Factory default: medium.
25
Settings/Supervisor level menu
Extended cool down
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to handle.
The bar chart shows you the setting.
– from 0-18 mins.
– Factory default: 0 mins (normal
cooling down period)
The programme duration will increase
accordingly.
You cannot extend the cooling down
time for the Warm air, Cool air,
Woollens handcare or Smoothing
programmes.
Save
You can choose whether you want
the Save option to appear in the main
menu. The save function is required
if, for example, you want to change
the favourite programmes which have
been saved to the short cut buttons.
– Factory default: Off.
To change programmes which have
been saved to a short-cut button:
^ See "Selecting a programme/Saving
a favourite programme" in the
separate Operating and installation
instructions.
26
Temperature unit
For displaying settings with
temperatures in °C or °F.
– °C (factory default)
– °F
Settings/Supervisor level menu
Drying levels
Cottons drying levels
Please note: Changing the settings for
drying levels in the Settings menu will
also affect the Cottons t
programme.
Minimum iron drying levels
Automatic drying levels
The drying levels in the above-named
programmes can be individually
altered.
The bar chart shows you the setting.
Clean out airways
The electronic unit in the dryer
detects the degree of a blockage
caused by fluff or detergent residues
in the fluff filter or ducting, and the
following prompt comes up in the
display: Clean out airways
Clean the filters
Check ducting.
You can decide at what level of fluff
this message should appear.
You will have an idea of how often this
should be done after a few drying
programmes.
– Off
– from drier to
Clean out airways does not appear.
– damper
In cases of a very severe blockage in
the ducting, the programme is
cancelled and the message Clean
out airways comes up regardless of
this option.
– Factory default: level 4
Machine iron drying levels
The drying level Machine iron can be
altered separately in the Cottons
programme.
The bar chart shows you the setting.
– from drier to
– damper
– Factory default: medium.
– Heavy
Clean out airways only appears
when there is a heavy build-up of
fluff
– Normal
(Factory default)
– Light
Clean out airways appears when
there is only a small build-up of fluff.
27
Settings/Supervisor level menu
Clean condenser unit
Check the condenser unit from time
to time, and clean it if necessary.
The Clean the condenser unit
maintenance message will remind
you to do this. You can decide after
how many hours you want the
message to appear.
Delay start
You can set a later start time using
the Timer (see "Timer" in the
Operating and installation
instructions).
You can decide how this time is
displayed.
– Programme end
The number of hours will depend on
how much fluff collects in the
condenser unit.
If the condenser unit gets choked with
fluff, or conversely there is hardly any
build-up of fluff, the number of hours
can be adjusted accordingly.
– Factory default: after 400 h.
– Off
– Time interval of 100 to 1600 hours
Display res. moisture
The residual moisture of the drying
stage reached is displayed as a %
during the programme sequence.
– Factory default: Do not display %
28
The finish time for the programme is
selected.
– Programme start
The start time for the programme is
selected.
– Time until start
The time until the start of the
programme is selected in
minutes/hours.
– Off
(Factory default)
When the Timer button is pressed,
only the programme duration, the
predicted programme finish time and
the current time of day is displayed providing Time not displayed has not
been selected in the Time of day
setting.
Settings/Supervisor level menu
Controls
The machine can be set to operate in
"Launderette mode with WS-short cut
keys..."
Operation is simplified with the use of
shortcut buttons D E F G.
People operating the machine cannot
then alter the pre-set programmes.
– D with short cut keys
(Werkeinstellung)
– WS-shortcut keys, basic
There are 4 programmes in the basic
menu.
Compile the 4 programmes first,
before you activate the Laundrette
option (see "Selecting a
programme/Saving a favourite
programme" in the separate
Operating and installation
instructions).
– WS-shortcut keys + Logo
There are 12 programmes which can
be selected using the multi-function
selector.
The first three of these are to be
found in the basic menu.
Compile the 12 programmes first,
before you activate the Laundrette
option (see Favourites setting in this
booklet).
– WS-shortcut keys, ex time
4 timed programmes* with different
temperature levels are controlled
using an external coinbox.
The running time is set, and this
cannot be changed by the person
operating the machine.
– WS-shortcut keys, int time
4 timed programmes* with different
temperature levels are electronically
controlled.
The max. running time is set, and this
can be changed by the person
operating the machine.
This option can also be used without
a coin box.
* The maximum programme duration is
set during the commissioning process.
Caution: If "Launderette mode with
WS-shortcut keys..." has been
selected the Settings menu is not
accessible after exiting the
Settings/Supervisor level menu. You
cannot then get back into
Supervisor level. If you need to
access it please contact the Miele
Service Department.
29
Settings/Supervisor level menu
Logo
The welcome logo "MIELE" or
"CUSTOMER'S LOGO" appears with
control options WS-shortcut keys +
Logo, WS-shortcut keys ex/int time.
– Miele Logo
Factory default
– Customer's Logo
Target groups
Activating target groups by means of
multiple selection.
The target group programmes selected
will be added to the basic programmes.
See "Programme chart" in this booklet.
– Household
– Small businesses
– Off (factory default)
– On
^ To switch on or off, press OK until
information is displayed.
Special programmes
You can create 5 special
programmes, which can either be
residual moisture programmes or
timed programmes, and name them.
The 5 special programmes have been
pre-programmed at the factory:
S.prog1-3: Residual moisture
programmes
S.prog4-5: Timed drying programmes
– Final residual moisture programmes:
0%
– Professional cleaners
– Running time of timed programmes:
20 minutes
– Special programmes
– Additional drying time: 0 minutes
^ Only once you have made your
selection, select Confirm selection
and press the multi-function selector
to confirm your choice.
Demo programme
This can be used by dealers to
demonstrate the machine in their
showrooms.
The controls are operated in the same
way as they would be in normal use.
However, the machine will not heat up,
and fault messages and the operating
hours counter will not be displayed.
30
– Temperature (of process air): 50°C
Saving your options to memory and
creating individual programmes is
described in the next few pages.
Settings/Supervisor level menu
To set Special programmes
Special programmes must first be activated under the Target
groups setting.
Settings
Back A
Special programmes
S.prog1
S.prog2
S.prog3
H
^ Select S.prog1, 2, 3, 4 or 5.
Settings
Back A
Special programmes
Res. moisture prog.
Timed programme
^ Decide whether you want to select a residual moisture or a
timed programme.
1. To save the programme name
Save programme name:
Delete
H
S.prog1
Continue
H
Back A
H
^ Confirm Delete to change the programme name.
^ Confirm Delete again until the symbols you wish to delete
have been removed.
Save programme name:
DRY+_ _ _
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9 / + - . _
abc
H
Delete
H
Continue
H
Back A
H
^ Turn the multi-function selector to move the cursor to the
symbol line.
31
Settings/Supervisor level menu
^ Using the multi-function selector,
select and confirm each letter or
symbol in turn to create the
programme name.
A maximum of 7 symbols may be
entered.
– abc/ABC
To select lower or upper case letters
(short-cut button D)
– Delete
Deletes the last character entered
(short-cut button E)
– Continue
To finish entering text (short-cut
button F)
To go directly to the individual
programme creation system
– Back
Back to the level above (short-cut
button G)
2. Individual programme creation
system
You can define the programme
features by changing the basic
settings.
Enter the names of your special
programmes and their basic settings
into the "Special programmes" table in
the "Programme chart".
Residual moisture programme
Final residual moisture level
– from -6% (dry) to 40% (damp).
Additional drying time
– from 0 to 60 minutes.
Temperature (of process air):
– from cold to 60°C
Timed programme
Duration
– up to 55 minutes, in 1-minute steps.
Temperature (of process air):
– from cold to 60°C
32
Settings/Supervisor level menu
Settings which can only be
changed during the
commissioning process
If you wish to change the settings after
the commissioning process, please
contact the Miele Service Department.
Payment system
A coin box needs to be fitted.
– No coin box
– Programme operation*
The tumble dryer is operated using a
coin box. The user purchases a
wash programme.
– Timed operation*
The tumble dryer is coin-operated
using a time meter. The user
purchases a time-controlled
programme.
– RS 232*
When the tumble dryer is
coin-operated, serial interface RS
232 is activated.
– IK6*
When the tumble dryer is
coin-operated, serial interface RS
232 for the IK6 is activated.
* Then the following settings are
offered: Coin mechanism lock, Signal to
Pin 7, T-max exceeded, Duration cool
air, Cool air free, Duration hot air.
Coin mechanism lock
In coin operation mode, the payment
system can be set so that
programming changes can be made
within a specified time period without
losing the coins.
– Off
– Immediately after starting
Cancellation and changes not
possible without loss of payment.
– 1 minute after starting
(up to 5 minutes)
Cancellation and changes not
possible after this time period without
loss of payment.
Signal to pin 7
Setting the feedback signal for the
coin box.
– Programme end
A signal is sent to pin 7 on the coin
mechanism at the end of the
programme.
– Release the start button
A signal is sent to pin 7 on the coin
mechanism when the start button is
released.
– Start and programme end
A signal is sent to pin 7 on the coin
mechanism when the start button is
released and at the end of the
programme.
33
Settings/Supervisor level menu
T-max exceeded
T-max exceeded setting. A security
time margin to prevent the coin box
being tampered with.
Duration hot air
This determines the maximum
duration for the Hot air programme in
Controls option WS short cut keys,
ex/int time .
– 30 to 240 minutes.
Duration cool air
This determines the maximum
duration for the Cool air programme
in control options WS-shortcut keys,
ex/int time .
The programme duration can be
altered in 10-minute steps.
– 10 to 120 minutes.
Cool air free
No charge is made for Cool air. The
programme can be started without
payment.
– On
– Off
The programme duration can be
altered in 1-minute steps.
– 15 to 120 minutes.
Supervisor level code
The Settings/Supervisor level menu
can be locked with a code to prevent
it being accessed by unauthorised
personnel (the Language J setting
can still be altered).
– Code not required.
Some settings can be changed at
any time.
Select this option if you wish the
person operating the dryer to be
able to change the settings.
– Code required
All settings can be changed once
the code has been inputted.
Select this option if you only want the
person operating the dryer to be
able to change settings via a code.
34
35
International Service Contacts
America: +1 609 419 4376
Australia, Asia, Oceania: +61 3 9764 7880
Europe, Africa, Middle East: +49 5241 89 66 877
E-mail: service@miele-marine.com
www.miele.com/marine-service
Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany
Alteration rights reserved/0515
M.-Nr. 09 871 180 / 01
Download PDF
Similar pages