WaterSpec | Water Treatment for Food Service Equipment

FOUNTAIN BEVERAGE (SODA)
EQUIPMENT & DRINKING WATER
The main ingredient in a fountain beverage is water, so assuring consistent water quality is
critical. Removing chlorine and chloramine provides a better tasting carbonated beverages
and reduces extra syrup normally added to the drink to mask the chlorine taste and odor.
High quality filtered water delivers:
• A CONSISTENT HIGH-QUALITY, GOOD TASTING BEVERAGE.
• REDUCED SYRUP USAGE SINCE COSTLY OVERCOMPENSATION OF SYRUP NOT NEEDED TO MASK CHLORINE TASTE.
• TASTE. HIGHER CARBONATION IN BEVERAGES INCREASING EFFERVESCENCE ELIMINATING FLAT DRINKS.
Chlorine and Chloramine Removal
Standard beverage systems combine roughly 4 parts of carbonated water to 1 part syrup concentrate (bag in boxes) to
form a carbonated beverage. These traditional post mix systems usually only requires the removal of chlorine from the
water supply. In these applications use the BevSpec BTO filter cartridges for sediment and chlorine removal only.
Newer beverage systems that use a much high percentage of carbonated water and a more concentrate syrup
component often require the removal of chloramine as well as chlorine when present in the water supply. In these
applications, use BevSpec BTOC filter cartridges for sediment, chlorine and chloramine removal.
Sizing Guidelines
The following sizing guidelines are based on water flow requirements of soda equipment on average water pressure and water
quality. Variations in water quality or pressure may reduce overall water flow especially as filters are in service for prolonged periods.
BevSpec filters provide excellent sediment filtration and chlorine/chloramine removal. The gallon capacity ratings of the filters are
based solely on chlorine and chloramine removal and not sediment removal. Recommended filter change interval is 6 months.
BevSpec
Item
System:
#:
Service
Chlorine
Chloramine
Number of
Conn
System
Weight
Removal:
Carbonators:
Size:
Dimensions:
(lbs):
Flow Rate: Removal:
310021
2.00 GPM
15,000
-
1
3/8
4x15x4
5lbs
BS-TOC20 Single 310022
2.00 GPM
15,000
6,000 gallons
1
3/8
4x21x4
5lbs
BS-TO20 Twin
310023
4.00 GPM
30,000
-
2
1/2
15x19x5.5
9lbs
BS-TOC20 Twin
310024
4.00 GPM
30,000
12,000 gallons 2
1/2
15x26x5.5
9lbs
BS-TO20 Triple
310025
6.00 GPM
45,000
-
3
1/2
19x19x5
13lbs
BS-TOC20 Triple 310026 6.00 GPM
45,000
18,000 gallons 3
1/2
19x26x5
13lbs
BS-TO20 Single
BS-TO20 Quad
310027
8.00 GPM
60,000
-
4
1/2
23x19x5
16lbs
BS-TOC20 Quad
310028 8.00 GPM
60,000
24,000 gallons 4
1/2
23x26x5
16lbs
BTO 20 Single
BTO 20 Twin
BTO 20 Triple
BTO 20 Quad
COFFEE, TEA &
ESPRESSO EQUIPMENT
Ninety-eight percent (98%) of a cup of coffee is composed of water, so the quality of your
coffee is dependent on the quality of the water. Chlorine ruins the taste of coffee. The
presence of chlorine shortens pot life by accelerating coffee bitterness. Scale build-up on
heating elements prevents water temperatures necessary for proper flavor extraction.
Untreated water forms lime scale in the brewing equipment necessitating expensive descaling procedures, and/or
shortening the life of the unit.
Providing high quality water produces the following benefits:
• BREWING EQUIPMENT MAINTENANCE IS REDUCED & EQUIPMENT LIFE IS PROLONGED.
• TASTE AND AROMA IS ENHANCED WITH LONGER POT LIFE.
• MINERAL SCALE BUILD UP IS INHIBITED.
• INCREASED PROFITS FROM SATISFIED CUSTOMERS
Sizing Guidelines
The sizing guidelines are based on water flow requirements of coffee/tea equipment with average water pressure and water quality.
Variations in water quality or pressure may reduce water flow especially as filters are in service for prolonged periods.
BevSpec™ filters provide excellent sediment filtration, chlorine removal, and mineral scale control. The gallon capacity ratings of
the filters are based solely on chlorine removal and not sediment or mineral scale control. Recommended filter change interval is
6 months.
BevSpec
System:
Item
Service
Chlorine
Single Pot
Med. Vol.
High Vol.
Conn
System
Weight
#:
Flow Rate:
Removal:
Brewers:
Brewers:
Brewers:
Size:
Dimensions:
(lbs):
BS-TOS10 310029 1.65 GPM
10,000
1-2
1
-
3/8
4x15x4
4lbs
15,000
2-3
1
-
3/8
4x21x4
9lbs
3.30 GPM
30,000
3-4
2
1
1/2
15x19x5.5
7lbs
4.00 GPM
30,000
4
2-3
2
1/2
15x26x5.5
9lbs
Single
BS-TOS20 310030 2.00 GPM
Single
BS-TOS10 310031
Twin
BS-TOS20 310032
Twin
Espresso and Office Coffee Service – Only Use BTOS 10 Single Systems. If water quality is very poor or
demineralization is required for espresso equipment, reference the RO-175NE system under CookSpec systems.
BTOS 10 Single
BTOS 10 Twin
BTOS 16 Single
BTOS 16 Twin
Download PDF
Similar pages