[updated 0515]Brillia CHX181-SQB-1 Manual

KOBE Range Hoods
Brillia Series
Model No. CHX8130SQB-1 (30”)
CHX8136SQB-1 (36”)
INSTALLATION INSTRUCTIONS
AND OPERATION MANUAL
IMPORTANT
READ THIS FIRST
READ BEFORE INSTALLATION
1. Carefully check all contents of packages.
2. Thoroughly inspect the unit for any shipping damages, cosmetic
damages or defects.
3. Have a certified contractor/electrician test the unit before installation.
IF THERE IS ANY PROBLEM:
1. DO NOT INSTALL THE UNIT AND KEEP ALL ORIGINAL
PACKAGING MATERIAL.
2. Have your original invoice as proof of purchase and product serial
number ready.
3. Contact your merchant for product replacement due to shipping
damages, cosmetic damages or defects.
4. For all other issues, call 1-877-BUY-KOBE (289-5623), or e-mail to
info@koberangehoods.com .
NO RETURN, NO REFUND, NO EXCHANGE IF:
1. PRODUCT HAS BEEN INSTALLED
2. KNOCK-OUT HOLES HAVE BEEN PUNCTURED
3. MISSING ORIGINAL PACKAGING MATERIAL AND/OR PARTS
[ENGLISH]
- READ AND SAVE THESE INSTRUCTIONS CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ......................................................................... 1
COMPONENTS OF PACKAGE....................................................................................... 3
INSTALLATION ............................................................................................................... 4
OPERATING INSTRUCTIONS........................................................................................ 8
MAINTENANCE .............................................................................................................. 9
SPECIFICATIONS......................................................................................................... 10
MEASUREMENTS & DIAGRAMS................................................................................. 11
PARTS LIST .................................................................................................................. 13
CIRCUIT DIAGRAM ...................................................................................................... 15
TROUBLE SHOOTING ................................................................................................. 16
DISCLAIMER ................................................................................................................ 17
WARRANTY .................................................................................................................. 18
PRODUCT REGISTRATION ......................................................................................... 20
- READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING ALL WIRING MUST BE DONE BY A PROFESSIONAL AND IN
ACCORDANCE WITH NATIONAL AND LOCAL ELECTRICAL CODES.
IMPORTANT SAFETY INSTRUCTIONS
- PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION -
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY,
OBSERVE THE FOLLOWING:
1) Installation and electrical wiring must be done by qualified professionals and in accordance with all
applicable codes and standards, including fire-rated construction.
2) When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other hidden
utilities.
3) Ducted fans must be vented to the outside.
a) Before servicing or cleaning unit, open the light panel and SWITCH POWER OFF AT SERVICE
PANEL.
b) Clean all grease laden surfaces frequently. To reduce the risk of fire and to disperse air properly,
make sure to vent air outside. DO NOT vent exhaust air into wall spaces, attics, crawl spaces or
garages.
NOTE
-
This warranty is void without an authorized agent’s receipt or if unit is
damaged due to misuse, poor installation, improper use, mistreatment,
negligence or any other circumstances beyond the control of KOBE
authorized agents. Any repair carried out without the supervision of KOBE
authorized agents will automatically void the warranty.
-
KOBE will not be held responsible for any damages to personal property or
real estate or any bodily injuries whether caused directly or indirectly by the
range hood.
WARNING:
•
•
•
•
•
•
•
•
TO REDUCE THE RISK OF PERSONAL INJURY IN THE EVENT OF A RANGE
TOP GREASE FIRE:
Keep all fan, baffle/spacer/filter/oil tunnel/oil container and grease-laden surfaces clean. Grease
should not be allowed to accumulate on fan, baffle/spacer/filter/oil tunnel/oil container.
Always turn hood ON when cooking.
Use high settings on cooking range ONLY when necessary.
Do not leave cooking range unattended when cooking.
Always use cookware and utensils appropriate for the type and amount of food prepared.
Use this unit only in the manner intended by the manufacturer.
Before servicing, switch power off at service panel and lock service panel (if possible) to prevent
power from switching on accidentally.
Clean ventilating fan frequently.
1
What to Do In The Event Of a Range Top Grease Fire
•
•
•
•
SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the burner.
KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES. If the flames do not go
out immediately, EVACUATE THE AREA AND CALL THE FIRE DEPARTMENT or 911.
NEVER PICK UP A BURNING PAN – You May Get Burned.
DO NOT USE WATER, including wet dishcloths or towels – a violent steam blast will result.
Use an extinguisher ONLY if:
a) You have a Class A, B, C extinguisher and know how to operate it.
b) The fire is small and contained in the area where it started.
c) The fire department has been called.
d) You can fight the fire with your back to an exit.
What to Do If You Smell Gas
-
Extinguish any open flame.
Do not try to turn on the lights or any type of appliance.
Open all doors and windows to disperse the gas. If you still smell gas, call the Gas Company and
Fire Department right away.
CAUTION
1) For general ventilation use only. Do not use to exhaust hazardous or explosive materials and vapors.
2) To reduce the risk of fire, use only metal ductwork. Sufficient air is needed for proper combustion and
exhausting of gases through the flue (chimney) to prevent back drafting.
3) Follow the heating equipment manufacturer’s guideline and safety standards such as those published
by the National Fire Protection Association (NFPA), and the American Society for Heating,
Refrigeration and Air Conditioning Engineers (ASHRAE), and code authorities.
4) Activating any switch on may cause ignition or an explosion.
5) Due to the size and weight of this hood, two people installation is recommended.
ELECTRICAL SHOCK HAZARD – Can result in serious injury or
death. Disconnect appliance from electric power before servicing.
If equipped, the fluorescent light bulb contains small amounts of
mercury, which must be recycled or disposed of according to Local,
State, and Federal Codes.
2
COMPONENTS OF PACKAGE
(Must keep all material for returns or refunds)
Range Hood Box
{C}
Model #
CHX8130SQB-1
CHX8136SQB-1
(30”)
(36”)
{A} BRILLIA Range Hood
{B} Warranty Registration Card
{C} Quick Reference Guide
{D} Baffle Filter x 2 (30” hood)
x 3 (36” hood)
{E} Screws package
{F} 6” Round Plastic Collar
{G} Hood Mounting Bracket
{H} Duct Cover Mounting Bracket
{D}
{E}
Knob attached
to baffle filter
3/16” x 3/8” (6 Pcs)
{A}
{F}
Pre-installed
{G}
Pre-installed
{B}
{H}
FOR MORE INFORMATION, PLEASE VISIT OUR W EBSITE www.koberangehoods.com OR
CONTACT KOBE RANGE HOODS AT (626) 775-8880.
3
INSTALLATION
PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING
Calculation before installation
To calculate the length of the installation, please refer to Table 1. (All calculation is measure in
inches.)
TABLE 1
A = Height of Floor to Ceiling
B = Height of Floor to Counter Top
(Standard: 36”)
C = Preferred Height of Counter Top
to Hood Bottom (Recommended
26” to 30”)
D = Height of Hood
E = Height of Duct Cover [F – D]
F = Height of the Hood Installation
[A – (B+C)]
SAFETY WARNING
HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES IF REMOVING
ANY PARTS FOR INSTALLING, CLEANING OR SERVICING.
NOTE: BE CAREFUL WHEN USING ELECTRICAL SCREWDRIVER, DAMAGE TO THE
HOOD MAY OCCUR.
4
Figure 1
Preparation before Installation
NOTE: TO AVOID DAMAGE TO YOUR HOOD,
PREVENT DEBRIS FROM ENTERING
THE VENT OPENING.
- Decide the location of venting pipe from the hood
to the outside. Refer to Figure 1.
- A straight, short venting run will allow the hood
to perform more efficiently.
- Try to avoid as many transitions, elbows, and
long run as possible. This may reduce the
performance of the hood.
- Use duct tape to seal the joints between pipe
sections.
- Temporarily wire the hood to test for proper
operation before installing.
- If necessary, prepare back wall frame with cross Figure 2
framing lumber for secure installation. Using
references on Table 1 and the measurements on
pages 11-12, decide the level of the lumber.
Refer to Figure 2.
- Peel protective film off the duct cover and the
hood (if any).
Hood Installation
Figure 3
CAUTION: If required to move the cooking
range to install the hood, turn off the power on
an electric range at the main electrical box.
SHUT OFF THE GAS BEFORE MOVING A GAS
RANGE.
1.
2.
3.
4.
Using references on Table 1 and
measurements on pages 11-12, mark the
leveling point for hood-mounting bracket on
the wall.
Secure 3 mounting screws (not provided) on
the wall leaving 1/8” away from the wall.
Refer to Figure 3.
Align hood-mounting bracket to the mounting
screws on the wall and hook hood into place.
Secure and tighten the mounting screws.
CAUTION: MAKE SURE THE HOOD IS
SECURE BEFORE RELEASING.
5
Figure 4
Ductwork Installation
5.
Use 6” round steel pipe (not provided) to
connect the plastic exhaust on the hood to the
ductwork above. Use duct tape to make all
joints secure and air tight.
Refer to Figure 4.
Wiring to Power Supply
THIS RANGE HOOD MUST BE
PROPERLY GROUNDED. MAKE SURE
THIS
IS
DONE
BY
QUALIFIED
ELECTRICIAN IN ACCORDANCE WITH
ALL APPLICABLE NATIONAL AND LOCAL
ELECTRICAL
CODES.
BEFORE
CONNECTING WIRES, SWITCH POWER
OFF AT SERVICE PANEL AND LOCK
SERVICE PANEL TO PREVENT POWER
FROM
BEING
SWITCHED
ON
ACCIDENTALLY.
- If hood is operating normally, connect three
wires (black, white and green) to house wires
and cap with wire connectors.
- Store wires in the wiring box.
Figure 5
Duct Cover Installation
Figure 6
NOTE:
BE CAREFUL WHEN USING
ELECTRICAL SCREWDRIVER, DAMAGE TO
THE HOOD MAY OCCUR.
6.
Using reference E from Table 1 and
measurements on pages 11-12, mark the
leveling point for duct cover bracket.
7.
Secure the duct cover mounting bracket to the
wall with two screws (not provided). Make
sure all screws are tightened Refer to Figure
5. NOTE: Inner duct cover will cover the duct
cover bracket.
8.
Slide the entire duct cover onto the hood.
Refer to Figure 6.
6
Duct Cover Installation (Cont.)
Figure 7
NOTE:
BE CAREFUL WHEN USING
ELECTRICAL SCREWDRIVER, DAMAGE TO
THE HOOD MAY OCCUR.
9.
Secure the outer duct cover to the hood
mounting bracket with 4 (3/16” x 3/8”) screws
(provided). Refer to Figure 7.
10. Secure the inner duct cover with 2 (3/16” x
3/8) screws to the duct cover mounting
Bracket. Refer to Figure 8.
Install Accessories
11.
Place baffle filters underneath the hood. Refer
to Figure 9.
Final Assembly
12.
13.
Figure 8
Turn power ON in control panel. Check all
lights and fan operation.
Make sure to leave this manual for the
homeowner.
Attach Together
Figure 9
7
OPERATING INSTRUCTIONS
Model No.:
CHX8130SQB-1 (30”)
CHX8136SQB-1 (36”)
Note: For best results, turn fan on prior to any preparation or cooking and keep fans running while cooking. Adjust
speed as needed.
To operate the fan function
• Press On/Off Control to turn on the power.
• Once the On/Off Control is turned on, the prior fan selection will turn on. Press the
Speed Controls (Low, High or QuietMode™) to select the desired speed.
• QuietMode™ supersedes all other fan control. Turn off QuietMode™ to use Low or
High speed.
• Press On/Off Control to turn fan off.
To operate the light function
• Press the Light Control to turn lights on and off.
Note: The Power Control switch is the main power controller.
8
MAINTENANCE
SAFETY WARNING
NEVER PUT YOUR HAND INTO AREA HOUSING THE FAN WHILE THE FAN IS OPERATING.
To Clean Hood Surface
CAUTION:
NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS. DO NOT USE
PAPER TOWEL ON STAINLESS STEEL.
For optimal operation, clean range hood and all baffle/spacer/filter/oil tunnel/oil container regularly.
*** Regular care will help preserve the appearance of the hood.
1. Use only mild soap or detergent solutions. Dry surfaces using soft cloth.
2. If hood looks splotchy (stainless steel hood), use a stainless steel cleaner to clean the surface of
the hood. Avoid getting cleaning solution onto or into the control panel. Follow directions of the
stainless steel cleaner. Caution: Do not leave on too long as this may cause damage to hood
finish. Use soft towel to wipe off the cleaning solution, gently rub off any stubborn spots. Use
dry soft towel to dry the hood.
3. DO NOT allow deposits to accumulate or remain on the hood.
4. DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface
and cause rusting.
5. DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact
with stainless steel for extended periods. Many of these compounds contain chemicals, which
may be harmful. Rinse with water after exposure and wipe dry with a clean lint free cloth.
To Clean Baffle Filter/Oil Tunnel
CAUTION: DRAIN OIL FROM BAFFLE FILTERS, SPACERS & OIL TUNNEL REGULARLY TO
PREVENT OVERFLOW.
1. Remove all the baffle filters, spacers and oil tunnel.
2. Using a sponge, wash with warm soapy water. Dry completely before returning into place.
CAUTION: SHARP EDGES
(Note: Baffle Filters are top rack dishwasher safe.)
9
SPECIFICATIONS
MODEL / SIZE
CHX8130SQB-1 (30”)
CHX8136SQB-1 (36”)
COLOR
18-Gauge Commercial Grade Stainless Steel
CONSUMPTION / AMPERE
180W / 1.5A
NUMBER OF BLOWER
1
DESIGN
Seamless / Satin Finish
BLOWER TYPE
Double Horizontal Squirrel Cage
EXHAUST
Top: 6" Round
CONTROLS
Rocker Switch
LIGHTS
3-watt LED light x 2
HOOD DIMENSION
(W x D x H)
(CHX8130SQB-1) 29-3/4” x 19-11/16” x 12-3/16”
(CHX8136SQB-1) 35-1/4” x 19-11/16” x 12-3/16”
OPTIONAL ACCESSORIES
(W x D x H)
1) 30" Stainless Steel Back Panel
(SSP30) 30" x 1/10" x 32"
2) 36" Stainless Steel Back Panel
(SSP36) 36" x 1/10" x 32"
3) 1-Piece Inner Extension Duct Cover
(RA0930DC) 10-5/8” x 7-7/8” x 29-7/8”
4) 1-Piece Inner Extension Duct Cover
(RA0946DC) 10-5/8” x 7-7/8” x 46-7/8”
WEIGHT (lbs)
CHX8130SQB-1 (30”)
CHX8136SQB-1 (36”)
SPEED
Air Capacity (CFM)
Sone* (dB)
QuietMode™
300
1.0
*One Sone is equivalent to the sound of a refrigerator at 40 decibels.
**Specifications subject to change without notice.
10
Low
440
2.2
Net
33
37
High
750
5.6
Gross
42.8
46.8
MEASUREMENTS & DIAGRAMS
All measurements in ( ) are millimeters.
All inch measurements are converted from millimeters. Inch measurements are estimated.
Front View
Bottom View
Bottom View
11
Model No.:
RA0930DC
Model No.:
RA0946DC
Inner
Inner
(RA0930DC)
(RA0946DC)
12
PARTS LIST
MODEL NO.:
CHX8130SQB-1 (30”)
CHX8136SQB-1 (36”)
NO.
DESCRIPTION
MODEL /SIZE
PART NO.
1
Hood-Mounting Bracket
L1-0221-0092
2
Duct Cover-Mounting Bracket
L1-0203-0092
3
Duct Cover
12-00920-61
4
6” Round Plastic Exhaust
L1-0505-0003
5
Hood Casing
CHX8130SQB-1
10-8130B
CHX8136SQB-1
10-8136B
6
LED Light Driver
L1-0402-D001
7
ON/OFF Switch
L1-0405-0101
8
Speed Switch (I/II)
L1-0405-0103
9
Speed Switch (Q)
L1-0405-0104
10
Light Switch
L1-0405-0102
11
LED Light (3W)
L1-0403-0301
12
Capacitor Support
L1-0201-0092
13
Blower System
L1-0302-0120-802RO
14
Capacitor x 1PCS
L1-0401-0120-24
15
Baffle Filter
L1-0214-0122
13
MODEL NO.: CHX8130SQB-1
CHX8136SQB-1
1
5
2
3
6
10
9
8
7
11
4
13
12
14
CHX8130SQB
CHX8136SQB
15
15
14
CIRCUIT DIAGRAM
MODEL NO.:
CHX8130SQB-1
CHX8136SQB-1
Q
15
TROUBLE SHOOTING
Issue
After Installation,
both motors and
lights are not
working.
Lights are
working, but
motor(s) is not.
The range hood
is vibrating.
The motor is
working, but the
lights are not
working.
Possible Cause
The power is not on.
The control panel is defective.
The motor(s) is defective.
The capacitor(s) is defective.
The control panel is defective.
Solution
Make sure the circuit breaker and the unit’s power is
ON. Use a voltage meter to check the power supply.
Check and tighten wire connection.
Check the power input and power output on the
processor board.
If it’s needed, replace the processor board.
Replace the control panel.
Replace the motor.
Replace capacitor(s).
Replace the control panel.
The blower system is not secure.
Tighten the squirrel cage and air chamber.
The squirrel cage is not balanced.
Hood is not secured in place.
Replace the squirrel cage.
Check the installation of hood, tighten the mounting
bracket.
Replace the LED(s).
The wire connection is not secure.
The processor board is defective.
LED(s) is defective.
The light wiring(s) is loose.
Check wire continuity from light transformer to light
housing(s).
Check power input and power output on the light
driver. If it’s needed, replace the light driver.
Replace the control panel.
Light driver is defective.
The control panel is defective.
The range hood
is not venting
out correctly.
The range hood is installed outside of the
manufacture recommended clearance.
Obstacle blocking the pipe work.
Adjust the clearance between the range hoods and
cook top to 27” to 30”. For Island range hood, the
clearance between the range hoods and cook top is
30” to 36”.
Open the window to enhance the performance of the
range hood by creating a sufficient make-up air.
Remove all obstacles from the duct work.
The pipe size is smaller than the
suggested pipe size.
The pipe connection is not properly sealed.
Change the ducting according to the manufacture
suggestion.
Check the pipe installation.
The damper is not properly installed or is
missing from the installation.
The damper is not installed.
Check the damper installation.
There is no make-up air inside the house.
Cold air is
coming into the
home.
16
By installing the damper, it will help to eliminate air
backflow.
DISCLAIMER
1. CAREFULLY INSPECT ALL ITEMS FOR DAMAGES BEFORE ACCEPTING DELIVERY. NOTE
ANY DAMAGES ON THE FREIGHT BILL OR EXPRESS RECEIPT. REQUEST NAME AND
SIGNATURE OF THE CARRIER’S AGENT AND KEEP COPY TO SUPPORT YOUR CLAIM.
Upon acceptance of items, owner assumes responsibility for its safe arrival. Report damages to the
carrier and file a claim immediately. Failure to do so may result in the denial of your claim. The
carrier will furnish you with necessary forms for filing a claim.
DAMAGES CAUSED DURING TRANSIT ARE NOT COVERED UNDER OUR WARRANTY.
2. PLEASE INSPECT CONTENTS OF PACKAGE(S) CAREFULLY UPON RECEIVING!
We must be notified in writing of any damages and/or missing parts within the allocated days upon
your receipt of package(s).
CLAIMS WILL NOT BE ACCEPTED AFTER THE ALLOCATED DAYS.
NOTE: ITEMS WERE THOROUGHLY TESTED AND CAREFULLY PACKED IN OUR FACTORY
BEFORE SHIPPING.
3. Products must be returned in good working condition with ALL original parts and documentation
packed in ALL original cartons, fillers and shipping cartons.
EXCHANGES OR RETURNS MAY NOT BE ACCEPTED IF ANY PACKAGING IS MISSING.
4. MAKE SURE TO INSPECT THE HOOD FOR DAMAGES AND DEFECTS BEFORE
INSTALLATION. Appearance flaws of the hood found after installation and not affecting hood
performance is not covered under our warranty for returns or exchanges.
A)
Before Installation:
Return for exchange or refund (please see
above for acceptable returns).
B)
After Installation:
17
NO exchange or refund.
WARRANTY
WARRANTY CERTIFICATE
KOBE Range Hoods (referred to herein as “we” or “us”) warrants to the original purchaser
(referred to herein as “you” or “your”) all products manufactured or supplied by us to be free from
defect in workmanship and materials as follows:
TWO-YEAR LIMITED WARRANTY FOR PARTS AND LABOR ON KOBE PREMIUM/ BRILLIA
SERIES:
For two years from the date of your original invoice from a KOBE authorized dealer, we will, at
our sole discretion, choose to repair or replace the product free of charge that failed due to
manufacturing defects.
It is your sole responsibility to ensure the product is readily accessible for the service technician
to perform repairs. The service technician will not, under any circumstance, remove, alter
or modify any fixture built around and/or connected to the product to gain access to
perform repairs.
During the two-year Limited Warranty period, additional charges may apply which include but
are not limited to:
• Service technician travel charges if the requested service location is 30-miles out of
KOBE’s authorized service area
• Parts shipping expenses
• Un-installation of defective product and Installation of replacement product
Warranty Exclusions:
This warranty does not cover, including but not limited to the following:
a. Improper installation.
b. Any repair, alteration, modification not authorized by KOBE.
c. Duct alteration, modification and connection.
d. Incorrect electric current, voltage or wiring.
e. Normal maintenance and service required for the product.
f. Consumable parts such as light bulbs and carbon filters.
g. Improper usage of the product that it is not intended for, such as commercial use, outdoor
use and multi-family use.
h. Normal wear and tear.
i. Chips, scratches or dents by abuse or misuse of the product.
j. Damages caused by accident, fire, flood and other Acts of God.
k. Expenses incurred for service located outside of the designated service area.
l. Purchases from unauthorized dealers.
m. Removal fees of defective product and Installation fees associated with replacement
product.
18
If we determine that the warranty exclusions listed above apply or if you fail to provide all
necessary documentation for warranty service, you will be responsible for all expenses
associated with the requested service, including parts, labor, shipping, travelling and any other
expense related to the service request.
To qualify for warranty service, you must:
1. Have the ORIGINAL proof of purchase
2. Be the ORIGINAL purchaser of the product
3. Have the model number
4. Have the serial number
5. Have a description of the nature of any defect in the product or part
TO REQUEST WARRANTY SERVICE, PLEASE CONTACT THE KOBE RANGE HOODS
SERVICE CENTER:
KOBE Service Center (USA Only)
Tel:
1-855-800-KOBE (5623)
E-mail: kobe@adcoservice.com
For service in Canada or
To report a problem, please contact:
Tel: 1-626-775-8880
Email: customer.service@koberangehoods.com
19
PRODUCT REGISTRATION
Fill in the blanks and keep this paper with the original invoice in a
safe place for future service purpose.
1. Date of purchase
:
2. Model No.
:
3. Serial No.
:
For warranty service or spare parts purchase contact:
KOBE Service Center (USA Only)
Toll Free: 1-855-800-KOBE (5623)
Email: kobe@adcoservice.com
For service in Canada or to report a problem, please contact:
Tel: 1-626-775-8880
Email: customer.service@koberangehoods.com
Your notes:
20
KOBE Range Hoods
11775 Clark Street
Arcadia, CA 91006 USA
www.koberangehoods.com
This hood is made for use in the USA and CANADA only. We do not recommend
using this hood overseas as the power supply may not be compatible and may
violate the electrical code of that country. Using a this hood overseas is at your
own risk and will void your warranty.
Ce capot est conçu pour une utilisation aux États-Unis et au Canada seulement.
Nous ne recommandons pas d'utiliser cette hotte à l'étranger que l'alimentation
peut ne pas être compatible et peut violer le code de l'électricité de ce pays.
L'utilisation d'un cette hotte à l'étranger est à vos propres risques et
annulera votre garantie.
Esta campana está hecha para su uso en los EE.UU. y Canadá. No se recomienda el
uso de esta campana en el extranjero como la fuente de alimentación puede no ser
compatible y puede violar el código eléctrico de ese país. El uso de un esta campana
en el extranjero es a su propio riesgo y anulará la garantía.
VER.150505
Information subject to change without notice.
Download PDF
Similar pages