manual - Saje Natural Wellness

ultrasonic diffuser
Infuse your air with the vitality
and well being of nature
table of contents
Benefits of Diffusing
1
Recommended Saje Diffuser Blends
2
Product Features
3
Specifications
4
Diagram of Parts
5
Operating Instructions
6-10
Care & Maintenance
11-12
Cautions
13-14
FAQs
15-16
benefits of diffusing
Diffusing is an easy, heat-free way to enjoy Saje’s 100%
plant-based diffuser blends.
This ultrasonic technology, combined with water and a
diffuser blend, produces negative ions and aromas that
elevate your well being.
When used with your favorite Saje diffuser blend, the
ultrasonic diffuser's refreshing cool mist brings nature's
goodness into your space, supporting balance and
harmony.
Transform your surroundings with revitalizing air that's
reminiscent of fresh mist off a waterfall. Add the Saje
diffuser blend of your choice and enjoy fresh, inviting
aromas any time.
1
recommended saje diffuser blends:
soothing and relaxing diffuser blends:
• Unwind | Tranquility | Stress Release
refreshing diffuser blends:
• Refresh | Exhale | Rain Forest
tranquil diffuser blends:
• Spa Spirit | Mountain High | After the Rain
revitalizing and energizing diffuser blends:
• Brainstorm | Energy
use only saje diffuser blends; using other oils may
result in malfunction.
2
product features
• Uses an ultrasonic, heat-free system to disperse essential
oil molecules into the air.
• May also be used as a humidifier.
• Energy efficient, whisper-quiet operation and auto shutoff.
• Preset mist timer.
• AM/PM clock display.
• Two water tanks to house two different diffuser blends.
• LED display with optional light.
3
specifications
Product Name
aromaTime
Input Voltage
AC100-240V for power adapter input
Output Voltage
DC24V for power adapter output
Rating Power
max 12W
Water Tank Capacity
2 separate tanks with 7 fl. oz. (210 ml)
capacity per tank
Misting Duration
approx. 6 hours on continuous per tank
Mist Output
approx. 6-8 tsp (30-40 ml) per hour
Settings
Continuous mist setting only or preset mist
timer functionality per water tank
Light Options
LED display ON/OFF
Coverage Area
400 sq ft per tank
Dimensions
approx. (L) 5.5" x (W) 5.5" x (H) 5.7" or (L) 140
mm x (W) 140 mm x (H) 146 mm
Net Weight
approx. 21 oz (600 g)
Main Materials
Outer Cover: PP; Base: PET; Water Tank: PP
4
diagram of parts
R
A
A. Water Tank Lid & Air
Outlet Cover
B. Water Tank West
C. Water Tank East
D. Base/Main Body
E. Maximum Water Level Line
F. West Button
G. East Button
H. Hour Set (H) & Minute
B
K
N
C
E
D
M
L
F
Set Button (M)
G
I. Led Light Button
J. Led Display
K. Hour Display
L. Minute Display
m. West Tank Timer Display
n. East Tank Timer Display
o. Power Adapter
p. DC Power Jack
q. Ventilation Hole
r. Air Outlet
s. Replaceable Ceramic Discs
J
I
Q
P
O
S
5
operating instructions
1. Connect
power adapter to DC
power jack on bottom of unit before filling up water tank(s).
2.Remove the water tank
cover from the base to
expose water tank.
3.Fill the East and West water tanks with
room temperature water to no higher
than the maximum water level line (7
fl. oz./210 ml). Tilting the unit can cause
water to run into the diffuser’s ventilation system and out the bottom — to
ensure correct usage, always bring water to your ultrasonic diffuser and only
pour into the tank's indicated sections.
6
4.Add 10-15 drops (depending on preference) of your favorite Saje diffuser
blend to either the East or West tank,
or both. Choose the diffuser blends
that suit your timer settings or the
time of day you wish to use them.
Can’t remember which blend went in
which tank? Given that the sun rises in
the East and sets in the West, we recommend using the East tank for revitalizing morning blends and the West
tank for tranquil evening blends.
5.Ensure that the lid is facing the correct direction and replace the
water tank lid. Check that the grooves and water tanks' air outlets
match up and slide the lid down.
6. Plug power adapter into electrical outlet.
7
clock functionality:
1. P
ress the Hour (H) button and the Minute (M) button to set time.
Press the H button until you get to the hour you wish to set. Press
the M until you get to the minute that you wish to set. Once you
choose your preferred time, just leave the numbers and the time
will set.
Please note: The default LED display shows the clock time at 12:00.
W
E
AM
PM
8
continous mist functionality (no timer):
1. Press the West button to turn on the West tank for continuous
misting. A 'W' mark will appear on the top left hand side of the LED
display. Press the West button again to turn the unit off. The 'W'
mark will then disappear from the LED display.
2. Unit will shut off automatically when water in water tank reaches
minimum level (approx. 6 hours or 0.3-1.5 fl. oz./10-50 ml of water).
Repeat the same for East.
*Please note: Both water tanks cannot run at the same time. Run
times and amount of water left in the tank after auto shut-off will
vary due to climate, environment and other factors.
preset mist timer functionality:
1. Press and hold down the West button until the clock/LED display
flashes. Set the hour (H) and minute (M) in order to set a timer to
turn on the West water tank. Press the West button to confirm the
selected mist timer setting. If the button is not pressed, the timer
will automatically set after approximately five seconds. The West
water tank will turn on at the preset time and the mist output will
contain your selected Saje diffuser blend. Please note when timer
is being set for the first time, the default clock time will show as
12:00.
2. Double press the West button to cancel the preset timer and the
9
West clock mark will disappear. Double press the West button
again to turn on the timer to the previously set time, making the
West clock mark reappear.
3. Press and hold down the West button again to set a new timer.
This new timer setting will replace the previously set timer for the
West tank. Please note the timer will flash the previously set time.
Repeat the same for East.
*Please note: Only one timer can be set for each tank. The tank for which the timer is preset will automatically turn on, turning off the current tank's mist.
led light display functionality:
The LED light display will be on by default. Press the Light button to
turn the display off. Press the Light button again to turn the clock on.
* Please note: If the Light button is turned off, all other buttons,
except the LED light button, will not work. However, the unit will
continue to function. The aromaTime also retains clock and timer
information whether the light is on or off.
10
care & maintenance
• If the unit is knocked over while in operation, water could
leak into the internal mechanism of the unit; if this occurs, unplug from power, empty water and let unit dry
out in well-ventilated area for at least 3 days.
• Turn off unit and unplug from the power adapter prior
to cleaning.
• Remove cover and empty water from the water tank,
carefully avoiding the air outlet side.
• If required, use a clean, soft, damp cloth to wipe down
exterior of unit.
• Frequency of necessary cleaning is dependent upon usage and types of diffuser blends used (i.e. how thick the
essential oils are in the diffuser blend).
• To clean inside water tank, dispense a few drops of rubbing alcohol into tank and wipe with a clean, soft cloth.
• To clean ceramic disc at bottom of water tank, dispense
11
a few drops of rubbing alcohol onto a clean cotton swab
and wipe clean.
• The ceramic disc should be kept clean of mineral deposits and other debris for optimal misting. NEVER use any
sharp objects to clean the ceramic disc as this will damage the disc permanently.
• For optimal results, clean the water tank before changing
diffuser blends.
12
cautions
• Only use the power adapter supplied with the device.
• Never operate the device if the power adapter is damaged.
• Do not use if any part of the device is broken.
• To reduce the risk of electric shock, do not attempt to
service the device in any way other than as described
in the “Care & Maintenance” section of this manual.
• Do not disassemble or attempt to repair unit; in the
event of a problem, please contact 1-877-ask-saje.
• When moving the device, hold securely by the base.
• Do not touch the highly sensitive ceramic disc with
bare fingers.
• Always place the unit on a stable, level surface.
• Do not fill water tank directly from tap as water could
spill into the internal mechanism and cause damage.
• Do not plug the unit into the wall socket with wet
hands.
• To prevent damage to the ceramic disc, only use tap
water at room temperature.
• Do not pour water or other liquid into the air outlet.
13
• Do not tilt, move or attempt to empty or refill unit
while in operation.
• To prevent clogging and damage to the ceramic disc,
always use clean water.
• Remove any liquid left in the water tank after each use.
• Always turn off and unplug the device during maintenance or when not in use.
• Ensure that the power adapter is not covered or
blocked when plugged in; it must be able to dissipate
the heat properly.
• Use only Saje diffuser blends; other oils may contain
fragrances, base oils or synthetics that could result in
malfunction. Some single note essential oils are also
too thick or heavy for use in the ultrasonic diffuser. See
FAQs for more information.
• In case of smoke, unusual aroma, undue noise, or
other malfunction, unplug the unit immediately and
discontinue use. Further use may result in fire or electrical shock.
• Do not overfill or immerse the unit in water.
• Always keep unit out of reach of small children and
pets.
14
faqs
Q: what if my unit does not turn on?
Power adapter may not be properly plugged in; ensure
that the power adapter is properly plugged into the DC
power jack and the electrical source.
Q: what if my unit does not mist or there is almost no
mist?
During first time use, the unit may take up to 20 minutes
to reach its full mist potential.
There may not be enough water in the water tank; ensure
that the water tank is filled to the maximum water level
line.
The water level may be too high (higher than the maximum water level line); pour out excess water and try again.
The ceramic disc may require cleaning. Please see "Care &
Maintenance" instructions.
Q: what type of water should go into my ultrasonic
diffuser?
15
To prevent damage to the unit, it's recommended to use
room temperature tap water. To prevent clogging and
damage to the ceramic disc, always use clean water.
q: what can i put in my ultrasonic diffuser?
Use only 100% plant-based Saje diffuser blends; other
blends and oils may contain fragrances, base oils or synthetics that could result in malfunction.
Many single note essential oils should not be used in the
ultrasonic diffuser. Single note essential oils may have a
thick or heavy consistency that can clog the ultrasonic diffuser and cause it to stop working.
Saje diffuser blends have been carefully blended to be effective for you, and safe and easy to use in your ultrasonic
diffuser.
16
Download PDF
Similar pages