GENUINE MEGA.
MAC/MAT
®
Applications for Caterpillar®
Mega Articulated Truck TANK
GENUINE MEGA.
SPECIALTY HAULAGE SOLUTIONS FOR CONSTRUCTION AND MINING
For over 35 years, Mega has been
manufacturing water & fuel tanks, coal
haulers & bottom-dump trailers,
equipment
transports,
specialty
dumper
bodies,
mobile pumps and, most recently, elevating
scrapers for use in construction and mining
applications around the world. Mega designs
and manufactures all of its products and sells
and supports these products through
OEM construction & mining equipment
dealers worldwide.
Mega products are designed to work properly
with Caterpillar’s products, to maintain full
Caterpillar® warranty and to utilize Caterpillar®
componentry to the greatest extent possible.
Mega warrants all of its products for one
year/unlimited hours. Mega manufactures its
products in its facilities at its headquarters in
Albuquerque as well as with manufacturing
partners in Chile, Colombia, South Africa,
Australia, India and the United Kingdom.
Mega provides equipment and parts sales
and technical support to its dealers
and
end-customers for all of its products around
the world.
We look forward to serving you!
President
MEGA CORP.®
700 Osuna Rd. N.E. • Albuquerque, NM 87113
1-800-345-8889 • 505-345-2661 • Fax 505-345-6190
www.megacorpinc.com
Table of Contents
MAC/MAT-Mega Articulated Truck TANK...................................................1
MAC/MAT 5 & 6........................................................................................2
MAC/MAT 7, 8 & 9....................................................................................3
MEGA Standard Features.........................................................................4-7
Direct Pin Mounting............................................................................4
Flexible Front Mounting......................................................................4
Hydraulic Oil Cooler for MAC5 & MAC6...............................................4
Ladder & Hand Rails...........................................................................4
LED Lighting & Utility Lights.................................................................4
Mud Flaps..........................................................................................4
Water Level Gauges............................................................................4
Technical Manuals..............................................................................4
MEGA Spray System............................................................................5
M3 & M4 Water Pump................................................................5
MEGA Spray System Cab Control.................................................5
MEGA Electro Hydraulic Spray Control System............................5
MEGA Spray Head Valves............................................................6
MEGA Hydraulic Spray Head.......................................................6
Rear Spray Bar............................................................................6
Spray Capability..........................................................................7
MEGA Optional Features.................................................................8-14
Factory Installation..............................................................................8
Spray Options.....................................................................................8
Tank Dump Options............................................................................9
Fill Options.........................................................................................9
MEGA Water Cannon..........................................................................10
MEGA Foam Agent Fire Suppression System.......................................11
MEGA Nozzles.....................................................................................11
DiSCS™-Mega Digital Spray Control System........................................12
Self-Loading Capability.......................................................................13
Corrosion Resistant Package...............................................................14
Hose Reel...........................................................................................14
Quick Component Package.................................................................15
Tank Dimensions.....................................................................................16-22
MAC/MAT5 Dimensions......................................................................16-17
MAC/MAT6 Dimensions......................................................................18-19
MAC/MAT7 Dimensions......................................................................20
MAC/MAT8 Dimensions......................................................................21
MAC/MAT 9 Dimensions.....................................................................22
MEGA WARRANTY.......................................................................................23
MAC/MAT-Mega Articulated Truck Tank
Genuine Mega Design with Improved Performance and Cost Effectiveness.
Mega manufactures a complete line of water tanks for
all models of Caterpillar® articulated truck chassis. Mega
water tanks are available in both complete machine
(MAT-Mega Articulated Tank) and kit form (MAC-Mega
Articulated Conversion Kit) for dealer installation. When
purchased as a complete machine from Mega, the
machine is fully assembled and tested prior to shipment
– the dealer can purchase the entire machine under a
single purchase order eliminating any problems with
machine specification compatibility, delivery timing,
inventory carrying costs or installation requirements.
Mega water tanks are designed for stable operation,
proper weight distribution and long life in application
with CAT® articulated trucks. The tank’s structural,
hydraulic and electrical systems are integrated with the
CAT® chassis for trouble-free installation and operation.
Mega offers a wide range of options including corrosion
resistant coatings, stainless steel water pumps,
cannons, control cabinets and spray heads and bars,
fire-fighting foam spray systems, a multitude of spray
system configurations and Mega’s Digital Spray Control
System – DiSCS™. The available Mega DiSCS™ system
with GPS works with the complete variety of Mega
spray system componentry and offers automatic water
pump protection, integrated system troubleshooting,
reduced water consumption and vehicle-speed-based
spray rates.
The Mega product support team is available to assist
with all facets of installation via phone or e-mail. Mega
stocks a complete line of service and repair parts and
orders can be placed on-line at our website or by phone.
On-site technical assistance is available – speak with
your Mega sales representative for complete details.
Available Mega MAC/MAT Water Tanks for Caterpillar®
MEGA MODEL
TANK SIZE
CHASSIS CONFIGURATION
For other tractor models and custom sizes please contact Mega or your
local dealer for more information.
1
MAC/MAT 5 and 6
While Tanks May Look Similar On The Outside– It’s What’s Inside That Counts!
All Mega tanks are designed with safety, performance
and durability in mind. Tractor chassis life is improved
and maintenance decreased because our tanks
are engineered in collaboration with Caterpillar® to
match GVW, braking and chassis load ratings. Mega
MAC/MAT 5 and 6 tanks feature a dual elliptical tank
design combined with a proprietary baffling system
that minimize the effects of surging water while
maximizing tank longevity. The tank mounting system
utilizes line-bored rear pin mounts and flexible
clamp front mounts that require no welding making
tank installation and removal simple. Mega MAC/
MAT 5 and 6 tanks for the CAT®725 and CAT®730
truck chassis also include a standard hydraulic oil
cooler to protect the tractor hydraulic system from
overheating in demanding applications.
Mega Anti Surge System
Fully welded A36 grade steel plate
and structural shapes.
Rear Spray Bar
Hydraulically-actuated,
fully adjustable Genuine Mega
spray heads.
Mud Flaps
Front and rear
of the drive
tire mud flaps
included with
the tank.
Flexible Front Mounting
Attaches front of tank to the chassis.
No welding required. All fastening hardware
required supplied with tank.
Mega M3 WATER PUMP
High Speed, dual bearing, open
centrifugal pump capable of up to
800 gpm or 70 psi (3,028 lpm or 483 kPa).
2
Direct Pin Rear Mounting
Attaches rear of tank to chassis.
No welding required. Pins and locking
fasteners supplied with tank.
MAC/MAT 7, 8 and 9
Mega M.A.S.S baffling for superior strength, stability and longevity.
Mega MAC/MAT 7, 8, and 9 tanks are designed and
built to thrive in the most demanding construction,
mining, and power generation environments. These
flat bottom-style tanks are built around a heavy box
truss design that supports the line bored direct pin
rear mounts and flexible clamp style front mounts
that require no welding to enable easy installation
and removal of the tank. Our MASS (Mega Anti Surge
System) baffling provides the most stable, lowest
profile, and longest lived tank on the market today.
Tractor chassis life is improved and maintenance
decreased because our tanks are engineered in
collaboration with Caterpillar® to match their ROPS,
braking and chassis load ratings. The MASS design
fully drains the tank into a cleanable sump that
feeds the high performance Mega M4 water pump.
The water pump powers individually-controlled,
hydraulically-actuated, fully-adjustable, rear spray
heads that can be set for anything from light
dust suppression to heavy wide-path soaking.
Spray is controlled by our electro-hydraulic spray
control system that has unmatched versatility
and dependability.
Mega Anti Surge System
Fully welded A36 grade steel plate
and structural shapes.
Internal Water Lines
Available in stainless steel with
corrosion resistance package.
Rear Spray Bar
Hydraulically-actuated, fully
adjustable Genuine Mega
spray heads.
Mud Flaps
Front and rear
of the drive
tire mud flaps
included with
the tank.
Flexible Front Mounting
Attaches front of tank to the chassis.
No welding required. All fastening hardware
required supplied with tank.
Mega M4 WATER PUMP
High Speed, dual bearing, open
centrifugal pump capable of up to
1000 gpm or 100 psi (3,785 lpm or 689 kPa).
Direct Pin Rear Mounting
Attaches rear of tank to chassis.
No welding required. Pins and locking
fasteners supplied with tank.
3
Standard Features
Direct Pin Mounting With Line-Bored Holes
Mega MAC tanks pin directly to the rear pivot mounts of the truck chassis.
No welding is required at this point. New pivot pins and shims are supplied
with the tank.
Flexible Front Mounting
The truck chassis is allowed to flex beneath the spring type front mounting tie
downs. No welding is required to install these mounts.
Hydraulic Oil Cooler For MAC5 and MAC6
Mega MAC 5 and 6 kits includes oil cooler to permit extended water
pump operation.
Ladder and Hand Rails (excludes EU)
All Mega tanks include an access ladder to the top of the tank. Our standard
ladder features tread grip rungs for a sure footed grip and hand rails at the top of
the ladder for ease of access to the top of the tank. Optional customized safety
railing is available upon request to meet your exact requirements (extra charges
may apply).
LED Lighting & Utility Lights
All clearance, stop, and tail lighting on Mega tanks are LED type for long life and
low maintenance. Two work lights are mounted on the rear bulkhead of the tank
beneath water shedders. The lights are controlled by switches in the cab control.
Mud Flaps
Mud flaps fore and aft of rear drive tires are standard equipment on all Mega
MAC and MAT tanks.
Water Level Gauges
There are two LED type water level gauges standard on MAC/MAT tanks. One on the
cab control module and one on the solenoid control housing on the front bulkhead
of the tank.
Technical Manuals
Each Mega water tank kit includes one set of the following manuals: Operators
Manual, Maintenance Manual, Parts, Service and Kit Installation Guide/Instructions
as well as service drawings and schematics. Additional sets of manuals are available
for purchase. Please contact Parts Sales for more information.
Standard Features
Mega Spray System
Mega Water Pumps
The heart of the Mega spray system is the water pump. The water pump is actuated with the truck’s hydraulic
hoist pump and valve system. Mega spray controls ensure proper integration with the truck chassis’ hoist
valve and ECM. Oil is returned into the truck oil filtration and cooling system.
MAC/MAT 5 and 6 models feature the Mega M3 heavy-duty water pump which produces up to 800 gpm
and up to 70 psi. Direct bolt on hydraulic motor mount and steel splined coupling simplify drive motor
connection. Heavy shaft and dual bearing design provide long life and high water output for superior spray
fan and water cannon performance.
MAC/MAT 7, 8, and 9 tanks feature the Mega M4 high performance water pump capable of over 1000 gpm
or over 100 psi. The M4 series of pump also feature direct bolt on hydraulic motor mount and steel splined
coupling to simplify drive motor connection. The M4 pumps are available in both standard cast iron as well
as corrosion-resistant models with stainless steel waterways.
Mega M4 Water Pump
Mega M4 Corrosion Resistant
Water Pump
Mega M3 Water Pump
Mega Cab-Control
The in-cab spray control module provides independent control of each spray head, water valve and accessory
of the Mega water tank. Included in the cab control module is an LED type water level gauge. Our control
module is built for rugged use in the harshest environments of mining and construction.
Electro-Hydraulic Spray Control System
The Mega electro-hydraulic spray system provides independent
control of all spray nozzles and valving with the dependability of
hydraulic actuation. The solenoid control module is mounted inside
a weatherproof steel housing mounted on the front bulkhead of
the tank. There are two electronic water level gauges, one on the
cab control module inside the cab and one on the solenoid control
module outside the cab. Our electro-hydraulic spray system
provides unsurpassed dependability and ease of service.
Standard Cab Control Module
5
Standard Features
Mega Spray Head Valves
Mega Corp. developed and patented its spray
heads in 1976 and has continually improved them
since. Each Genuine Mega spray head is fully
adjustable for fan volume, width, and direction.
Precision water application is a simple matter of
proper selection of spray head settings and the
number of spray heads activated.
Standard Mega spray head valves are constructed
of a high-quality aluminum alloy metal. We offer
optional stainless steel models to better resist
corrosion and abrasion of harsh waters often
found in mining environments.
Mega Hydraulic Spray Head Valves
The Mega hydraulic spray head valve utilizes a custom made high quality
heavy-duty double acting hydraulic cylinder to open and close the valve portion
of the spray head. This spray head valve is suitable for any heavy equipment
prime mover and requires a hydraulic solenoid spray control system.
Rear Spray Bar
Rear Spray Bar
The Mega MAC/MAT rear spray bar is designed to fully utilize the full capability of the water pump.
The MAC/MAT 5 and 6 uses a 3 spray head configuration. The center head acts as the primary sprayer while
the two outboard swiveling heads act as supplemental spray for soaking and side washing. The spray bar is
constructed of 76 and 102 mm (3 and 4 inch) diameter carbon steel pipe and also features extra feed outlets for
hose reel and general use applications.
The MAC/MAT 7, 8, and 9 models utilize a 4 spray head configuration. The spray bar is also constructed of 76
and 102 mm (3 and 4 inch) diameter pipe available in either plain carbon or stainless steel. The spray heads are
also available in our new stainless steel model for severely corrosive environments.
6
Standard Features
Spray Capability
Mega spray head valves are fully adjustable for
fan width, fan volume and fan direction. When
combined with swivels on the spray bar, fan
direction can be adjusted in two axis. Mega spray
heads provide a consistent flat fan spray over a
3 Spray Heads
M3 Water pump
very wide area. One or two spray heads are capable
of suppressing dust on a road up to 27 meters
(90 feet) wide.
Vertical Side Spray
12 meters
(40 Feet)
27 meters
(90+Feet)
Water Cannon
37-43 meters
(120-140 Feet)
4 Spray Heads
M4 Water pump
Vertical Side Spray
12 meters
(40 Feet)
27 meters
(90+Feet)
Water Cannon
46-50 meters
(150-165 Feet)
7
OPTIONAL Features
Custom options available upon request.
Factory Installation
Factory Installation
Mega offers complete factory installation for all
models of articulated truck water tanks for both
customer-supplied and Mega-supplied chassis.
Factory installation includes complete testing prior to
delivery. Mega can also provide complete cleaning,
painting and detailing of a customer-supplied used
chassis if desired.
Spray Options
Vertical Side Spray
Two spray head valves are mounted on the front quadrant of the tank with
internal piping for spraying vertical fans of water. This spray is suitable for
spraying hill sides, piles, and berms.
Intermittent Spray
Intermittent spray control is a spray system feature that permits automatic
timing of spray head on/off events when alternating wet/dry patch watering
is desired.
Front Bumper Spray
The front bumper spray is commonly utilized to “sweep” a surface with high
pressure fans of water. Spray heads are mounted to spray from both sides
of the tractor. The spray heads are fully adjustable for vertical and horizontal
directions. The location of the spray bar allows the cab hood to fully tilt and
open for engine service.
8
OPTIONAL Features
Custom options available upon request.
Tank Dump Options
Dump Bar
A dump bar (sometimes called a “drip” or “dribble bar”) is a horizontally
arranged 102mm (4 inch) diameter steel pipe that is drilled along its bottom
center line with a row of holes. The dump bar can be either pressurized
or non-pressurized.
Pressurized dump bars spray penetrating jets of water directly onto/into
the ground surface the width of the tank. Pressurized dump bars may be
used with the water pump off to reduce the flow and pressure of water
released. Non-pressurized dump bars are gravity fed directly from the
bottom of the water tank. An advantage of this tool is that water can be applied for dust suppression even in the
event that the water pump is out of service.
Dump Valve – Remote or Manual Operation
The drain valve option is a 102mm (4 inch) diameter drain located at
the bottom rear of the tank. This option is available in either manual
or remote actuation.
Fill Options
Anti-Siphon Fill Pipe
The anti-siphon fill pipe is used with any pressurized water source. It
is specifically designed to accommodate municipal water systems and
fire hydrants requiring an air gap to prevent water siphoning back into
the supply.
Conical Fill Port
The Mega conical fill port is funnel shaped from 1676mm (66 inch)
diameter to 914mm (36 inch) diameter standing 610mm (24 inches) tall.
This allows for easier location of the water fill pipe sock over the main fill
port of the tank. (Note: Adds 279mm (11 inches) to overall height of the
vehicle. This optional feature does not ship installed on kit tanks.)
9
OPTIONAL Features
Custom options available upon request.
Mega Water Cannon
Mega water cannons are designed for severe duty
operation. Standard features include: stainless steel
waterways, permanently lubricated, planetary and
worm gear drives, ultra heavy-duty hydraulic drive
motors. Mega water cannons, controlled by an in-cab
joystick, have very smooth travel and can be easily
fitted with various adjustable nozzles.
Genuine Mega Water Cannon
(Shown with Butterfly Valve & Nozzle)
Mega MAC/MAT model tanks feature our
electro-hydraulic drive water cannon. Heavy-duty
hydraulic motors coupled to planetary and worm
gear sets drive both directions of travel providing
smooth adjustment and dependable service.
The water cannon, solenoid control module, and
hydraulically actuated water supply valve are
located on the front quadrant of the tank. The water
cannon includes a standard smooth bore nozzle
with built in stream straightener for long distance
water stream spray.
The Mega MAC/MAT 5 and 6 tanks with M3 pump
typically can project a stream of water through
the cannon up to 36 meters (120 feet). The Mega
MAC/MAT 7, 8, and 9 tanks with Mega M4 pump can
project a stream of water through the cannon up to
50 meters (165 ft.).
Mega Hydraulic Water Cannon
Hydraulic drive motors provide the highest durability
and very smooth travel. Our water cannon solenoid
control module is dependable and easily serviced.
Adding an adjustable nozzle is as easy as connecting
the nozzle and control lines.
10
OPTIONAL Features
Custom options available upon request.
Foam Agent Suppression System
A foam agent system consists of a 227 or 454 Liters (60 to 120
gallons) stainless steel foam agent reservoir imbedded into the
main water tank. This option also includes the following:
•
•
•
•
Nozzle on water cannon
Foam nozzle
Cab controls for cannon operation
Fog-to-stream adjustment
NOTE: Foam agent system requires selection of
water cannon option.
Nozzles (For Specialty Mega Water Cannon)
Standard Straight Smooth Bore
Standard Straight Bore With Built-In Stream Shaper
• Single stream
• Built in stream shaper straightens water flow & increases distance lower
pressure water pump systems
• 63 mm (2.5 inches) NH connection
Performance Enhancements
Grid For Standard Straight Bore Nozzle
• Single stream
• Built in stream shaper straightens water flow & increases distance
• 63 mm (2.5 inches) NH connection
Short Stream Shaper
• Increases performance of straight bore nozzles
• Shapes water stream to produce efficient flow
• In-Line Short & Long increases reach
Fog To Stream
Hydraulically Adjustable
• Hydraulic Adjustment
• Variable Fog Pattern
• 46m (150 feet) stream reach
Fog To Stream With Foam Eduction (Requires foam agent system)
• Hydraulic Adjustment
• Variable Fog Pattern
• 46m (150 feet) stream reach
• Adjustable fog pattern with foam (1, 3 and 6% proportioning)
• System does not include foam agent
11
OPTIONAL Features
Custom options available upon request.
Mega Digital Spray Control System
Most Mega water products are now available with the
new Mega Digital Spray Control System*-DiSCS™. The
original Mega cab control is replaced with a new more
compact and ergonomic operator interface and digital
control system. Along with the base DiSCS™ System,
Mega is offering a GPS optional accessory that allows
the operator to automatically control the amount of
water applied to road surfaces based on ground speed.
The DiSCS™ system works with the existing Mega spray
system hardware – water pumps, hydraulic motors,
spray heads and electro-hydraulic controls. DiSCS™
is available for use with most Mega water products
and offers the following additional benefits over the
base system:
GPS Speed Sensing
DiSCS™ uses GPS data to determine speed. The GPS system is universal – there is no special
application-specific engineering required and the system is not vulnerable to contamination
like radar-based systems. NOTE: Requires purchase of DiSCS™ option.
Self-Contained
DiSCS™ does not require connections to other vehicle systems to determine speed. Because
it is self-contained, it is easy to adapt to a wide variety of machine applications.
Automatic Water Consumption Reduction
The DiSCS™ system utilizes a PWM (pulse width modulation) strategy to automatically limit
the amount of water consumed based on vehicle speed while maintaining road dust control
coverage. Utilizing the PWM strategy avoids the addition of complex and costly variable flow
hydraulic systems and the resulting impact on machine reliability.
Automatic Shut-off
The DiSCS™ system automatically shuts off the flow of water as the vehicle comes to a stop
to prevent puddling. Spraying automatically resumes as the machine begins to move again.
Fail-Safe
In the event the DiSCS™ system loses its GPS speed signal or otherwise malfunctions, the
system reverts to manual mode and allows the machine to continue operating with full
capability in the original, manual mode until repairs can be made – no need to immediately
down the machine.
Versatility
DiSCS™ is adaptable to most Mega water equipment and can be easily added in the field to
machines originally equipped with the base system described above. The control system can
be retrofitted to many older models of water distribution equipment equipped with Mega
spray systems without replacing any hardware. And, the entire system can be used with
competitive water tanks as well.
Reliability
CORP.®
12
DiSCS™ utilizes the same Mega water pump, hydraulic motors, spray heads and
electro-hydraulic controls. There are no complex modifications to the vehicle's hydraulic
systems or powertrain – in fact these interfaces do not change at all. The same durable Mega
spray system components are maintained with all of the same parts supply, technical support
and documentation.
* Patent pending.
OPTIONAL Features
Custom options available upon request.
Self-Loading Capability
Mega MAC models 5 and 6 water tanks feature optional self-loading ability via the discharge pump.
Unique to Mega is a built in priming reservoir inside the water tank that floods the suction line with
water when the valving is switched to load the tank. An auxiliary manual priming pump is also included.
Optional suction hoses can be ordered separately.
Fully adjustable Mega Spray Heads
can be adjusted for fan width volume,
watering hillsides, berms or for ground
penetration and soaking.
Water pump
discharge valving.
Manually operated priming
pump for suction hose.
Swivel couplings
allows for vertical adjustment of spray.
Water pump
intake valving.
Suction Hose Connection.
13
OPTIONAL Features
Custom options available upon request.
Corrosion Resistance
Mega Corp. offers solutions to tank corrosion caused by the harsh waters often found in mining and landfill
environments. Protecting your tank against corrosion adds longevity and dependability to your purchase.
Moisture Cure Urethane Tank Lining
Tank interior is abrasive blasted to SP6 commercial blast standard and coated to 3-5 mil. thickness, of
aluminum-filled moisture cure urethane. This coating provides suitable protection from normal and salty
waters. Color: Gray.
Ultra High Solids Amine Epoxy tank lining
Tank interior is abrasive blasted to SP10 near white blast and coated with 10-14 mil. thickness of an
ultra-high solids epoxy suitable for immersion service that protects against salty, acidic, and alkaline waters.
Color: White.
Corrosion Resistance Package
This package is suitable for severe environments where corrosive waters are sprayed. The package consists of:
•
•
•
•
Anodized and hardened spray head valves
Corrosion resistant Mega M4 water pump with stainless steel waterways
Stainless steel spray bar and waterways
Stainless steel solenoid control module enclosure mounted on front bulkhead of tank
NOTE: Coating data sheet and MSDS available upon request.
Hose Reel
Hose Reel
Hose reels installed on Mega MAC models include high
quality rubber water hose and an adjustable fog to
stream nozzle. Manual rewind reels are rim wind type
available with 25 mm (1 inch) diameter hose in 15 meters
(50 feet) length.
14
GENUINE MEGA.
Global Support
Quick Change Component Package
Out in the field? Need parts? The quick change component package provides the end user with specific
operation critical parts for the Mega water tank spray system. Having these parts on hand can reduce
downtime by eliminating wait time for acquiring replacement parts. These kit parts can be customized
to an end user’s needs and water tank fleet. Contact your Mega dealer for complete parts kit list details
or contact your Mega sales representative at 1-800-345-8889 for more information.
Parts and Product Support available 24 hours a day, seven days a week.
Product Support Contact:
Office Direct 505.345.2661 • U.S. 1.800.345.8889 • After Hours & Weekend 505.506.1806
Mega’s product support team provides full-time technical
support including parts sales, on-site field assistance training and
after-hours emergency parts service. Mega maintains a complete
inventory of repair and maintenance parts for all of its products
including parts, accessory kits, and support packages for immediate
shipment. Call today for more information on
ordering parts or visit our website.
www.megacorpinc.com
Se Habla Español!
15
MAC/MAT5
725 ADT SWB-Standard Wheel Base
MAC/MAT5 – 18,925 Liters
(5,000 gallons)
A Overall Height
B Overall Length
C Overall Width
Tank Kit Weight
Tank Only Overall Length
Tank Only Overall Height
Tank Only Overall Width
4,023 mm
10,287 mm
2,845 mm
4,150 kg
5,588 mm
2,413 mm
2,896 mm
158 in
405 in
112 in
9,150 lbs
220 in
95 in
114 in
All weights and dimensions are subject to change.
A
B
16
C
MAC/MAT5
725 ADT LWB-Long Wheel Base
MAC/MAT5 –18,925 Liters
(5,000 gallons)
A Overall Height
B Overall Length
C Overall Width
Tank Kit Weight
Tank Only Overall Length
Tank Only Overall Height
Tank Only Overall Width
3,810 mm
1,186 mm
2,794 mm
5,443 mm
6,070 mm
1,930 mm
2,819 mm
150 in
467 in
110 in
12,300 lb
239 in
76 in
111 in
All weights and dimensions are subject to change.
A
B
C
17
MAC/MAT6
730 ADT SWB-Standard Wheel Base
MAC/MAT6 – 22,710 Liters
(6,000 gallons)
A Overall Height
B Overall Length
C Overall Width
Tank Kit Weight
Tank Only Overall Length
Tank Only Overall Height
Tank Only Overall Width
4,343 mm
10,516 mm
2,769 mm
4,468 kg
5,588 mm
2,718 mm
2,896 mm
171 in
414 in
109 in
9,850 lbs
220 in
107 in
114 in
All weights and dimensions are subject to change.
A
B
18
C
MAC/MAT6
730 ADT LWB-Long Wheel Base
MAC/MAT6 – 22,710 Liters
(6,000 gallons)
A Overall Height
B Overall Length
C Overall Width
Tank Kit Weight
Tank Only Overall Length
Tank Only Overall Height
Tank Only Overall Width
3,937 mm
1,189 mm
2,819 mm
5,897 kg
6,985 mm
2,261 mm
2,108 mm
155 in
468 in
111 in
13,500 lbs
275 in
89 in
83 in
All weights and dimensions are subject to change.
A
B
C
19
MAC/MAT7
735 ADT SWB-Standard Wheel Base
MAC/MAT7 – 26,495 Liters
(7,000 gallons)
A Overall Height
B Overall Length
C Overall Width
Tank Kit Weight
Tank Only Overall Length
Tank Only Overall Height
Tank Only Overall Width
4,064 mm
1,156 mm
3,353 mm
8,165 kg
6,909 mm
2,743 mm
3,353 mm
160 in
455 in
132 in
18,000 lb
272 in
108 in
132 in
All weights and dimensions are subject to change.
A
B
20
C
MAC/MAT8
740 ADT SWB-Short Wheel Base
MAC/MAT8 – 30,280 Liters
(8,000 gallons)
A Overall Height
B Overall Length
C Overall Width
4,114 mm
1,293 mm
3,429 mm
162 in
509 in
135 in
All weights and dimensions are subject to change.
A
B
C
21
MAC/MAT9
740 ADT LWB-Long Wheel Base
MAC9 –30,065 Liters
(9,000 gallons)
A Overall Height
B Overall Length
C Overall Width
Tank Kit Weight
Tank Only Overall Length
Tank Only Overall Height
Tank Only Overall Width
4,267 mm
1,326 mm
3,429 mm
9,525 mm
7,823 mm
3,073 mm
3,429 mm
168 in
522 in
135 in
21,800 lbs
308 in
121 in
135 in
All weights and dimensions are subject to change.
A
-A-
B
-O1-01-
22
-O1-01-
-O1-01-
C
-O1-01-
Warranty Coverage For Your Mega Equipment
Protecting your investment.
Mega provides a full one year warranty,
unlimited hours against defects in materials and workmanship.
Please visit our website for more information
http://www.megacorpinc.com/productsupport/warranty.asp
GENUINE MEGA.
MTT20 CAT777
Specialty Haulage Solutions For Construction & Mining
MMP4
ü
MSC8 CAT621H
MPT12
Caterpillar® Integration
Fully integrated hydraulic and electronic systems.
ü
OUTSTANDING PRODUCT SUPPORT
Support parts in stock. Technical communicators on staff.
ü
OEM Components
Mega uses CAT® axles, braking systems, & other components for seamless integration & serviceability.
ü
ONLINE PARTS
Mega dealers can order parts and access their account through our website.
www.megacorpinc.com
Mega Corp.
700 Osuna Rd. N.E. • Albuquerque, NM 87113 • 1-800-345-8889 • 505-345-2661 • Fax 505-345-6190
We Reach Out Globally to Take Care Of You
ALBUQUERQUE,
NEW MEXICO, USA
MEGA CORP.
NEWCASTLE,
UNITED KINGDOM
G.T. PROJECT ENGINEERING
Headquarters
Manufacturing Partner Since 2013
COIMBATURE,
INDIA
PREMIER FABRICATION
Manufacturing Partner Since 2013
BARRANQUILLA,
COLUMBIA
GECOLSA
Manufacturing Partner Since 2005
JOHANNESBURG,
SOUTH AFRICA
EFFICIENT ENGINEERING
Manufacturing Partner Since 2012
ANTOFAGASTA &
SANTIAGO, CHILE
PETRICIO INDUSTRIAL
BRISBANE,
AUSTRALIA
JAWS/BARB ENGINEERING
Manufacturing Partner Since 2003
Manufacturing Partner Since 2013
Wherever you are in the world, we are here to
help and to ensure you get the best quality, most
effective, most durable water tank built. Mega has
been responsible for the design, development,
manufacture, marketing and sale of products
used in surface mining and construction projects
worldwide. Mega’s products include all varieties
of water haulage equipment, 34 yard elevating
scrapers, coal haulers, bottom-dump trailers,
equipment transports, specialty dumper bodies,
mobile pumps, and stand tanks, as well as parts
service and technical support. Mega’s products are
manufactured at its headquarters in Albuquerque,
New Mexico, U.S.A. as well as by its partners in
Chile, Columbia, South Africa, United Kingdom,
India and Australia.
Full-time Quality Control Inspection Staff
•
Inspection of weldment to AWS D1.1 standard during and a after fabrication.
•
Compliance with applicable SAE ISO, and DOT standards.
•
Complete product documentation including drawings, parts
and operation manuals.
•
•
Fully functional 60+ minute operation of all installed products
prior to shipment.
Compliance with Caterpillar® hydraulic cleanliness specifications
including use of Caterpillar® hydraulic kidney system and particle inspection
of hydraulic oil samples.
Support Material
Mega offers a full-line of publications for its products including operator,
service, parts and maintenance manuals as well as drawings for installation
guides and schematics.
Check us out on theOPTIONAL
web @ Features
Custom options available upon request.
www.megacorpinc.com
ONline parts ordering is now available!
In response to customer requests, Mega has added
online ordering capability to our website. Customers
can browse through approximately 700 of our most
commonly-ordered parts and place orders using both
PO's and credit cards.
Customers will need to register on-line to access
this service. Pricing on the web, including any
applicable discounts and shipping, will be the same
as if the order were placed via telephone. Along
with parts ordering, Mega has refreshed the look
and functionality of the website to improve its use.
Check us out at: www.megacorpinc.com.
Order
Parts!
Illustrated Parts
Breakdowns!
Go Online
TODAY!
Mega Corp. and its respective logos as well as corporate and product
identity used herein, are trademarks of Mega Corp. and may not be used
without permission.
© 2013 Mega Corp. All rights reserved.
REV-11-2013
For more information please visit us
on the web at www.megacorpinc.com
MEGA retains all copyrights in any text, graphic images, and content owned by
Mega Corp. and hereby authorizes you to electronically copy documents
published herein solely for the purpose of transmitting or viewing the
information.
You may not mirror, modify or otherwise alter any files for rebroadcast, or
print the information contained therein, without written permission from
Mega Corp.
Materials and specifications are subject to change without notice. Featured
machines in photos may include additional equipment. See your dealer26
for
available options.
Download PDF
Similar pages