Gaggenau Instruction manual
CE481/491
Glass ceramic cooktop
&(
‘FPFP[FP
´
ž
‚
³Å
É
‘FPFPFP
‘FP
&(
‘FPFP ‘FPFPFP
‚
‘FP
2
´
‚
ž
É
³Å
‘FPFP[FP
Table of contents
omunircstIal
Safety precautions
Causes of damage
4
5
Environmental protection
Environmentally-friendly disposal
Tips for saving energy
6
6
6
Getting to know your appliance
The control panel
Touch keys
The hotplates
Residual heat indicator
Special accessories
7
7
7
7
8
8
Twistpad with magnetic knob
Removing the magnetic knob
Storing the magnetic knob
8
8
8
Setting the cooktop
Switching the cooktop on and off
Setting the heat setting
Changing the heat setting
Switching off the cooking zone
Settings table
9
9
9
9
9
10
Quick boil timer
Switching on the quick boil timer
Switching off the quick boil timer
11
11
11
Frying sensor function
Pans for the frying sensor function
Frying settings
Switching on the frying sensor function
Switching off the frying sensor function
Frying table
11
11
12
12
12
13
Childlock
Activating the childlock
Deactivating the childlock
14
14
14
Timer
Setting the automatic cooking time
Changing the cooking time
Cancelling prematurely
Short-term timer
Setting the short-term timer
14
14
15
15
15
15
Safety shut-off
15
Options menu
Settings in the options menu
Selecting the options menu
16
16
16
Cleaning and care
Ceramic
Hob surround
Magnetic knob
17
17
17
17
Rectifying minor faults yourself
18
After-sales service
19
Additional information on products, accessories,
replacement parts and services can be found at
www.gaggenau.com and in the online shop
www.gaggenau-eshop.com
3
m Safety precautions
Please read this manual carefully. Please keep
the instruction and installation manual as well
as the appliance certificate in a safe place for
later use or for subsequent owners.
Check the appliance for damage after
unpacking it. Do not connect the appliance if it
has been damaged in transport.
Only a licensed professional may connect
appliances without plugs. Damage caused by
incorrect connection is not covered under
warranty.
This appliance is intended for domestic use
only. The appliance must only be used for the
preparation of food and drink. The appliance
must be supervised during operation. Only use
this appliance indoors.
Do not use lids or unsuitable child safety
grilles. These can cause accidents, due to
overheating, catching fire or materials
shattering, for example.
This appliance may be used by children over
the age of 8 years old and by persons with
reduced physical, sensory or mental
capabilities or by persons with a lack of
experience or knowledge if they are
supervised or are instructed by a person
responsible for their safety how to use the
appliance safely and have understood the
associated hazards.
Children must not play with the appliance.
Children must not clean the appliance or carry
out general maintenance unless they are at
least 8 years old and are being supervised.
Keep children below the age of 8 years old at a
safe distance from the appliance and power
cable.
The appliance gets hot. Do not keep
combustible objects or aerosol cans in
drawers directly underneath the hob.
▯ The hob switches off automatically and can
no longer be operated. It may switch on
unintentionally at a later point. Switch off
the circuit breaker in the fuse box. Contact
the after-sales service.
▯
Risk of fire!
Risk of burns!
The hotplates and surrounding area
(particularly the hob surround, if fitted)
become very hot. Never touch the hot
surfaces. Keep children at a safe distance.
▯ The hotplate heats up but the display does
not work. Switch off the circuit breaker in
the fuse box. Contact the after-sales
service.
▯
Risk of burns!
Risk of electric shock!
Incorrect repairs are dangerous. Repairs
may only be carried out by one of our
trained after-sales engineers. If the
appliance is faulty, unplug the mains plug
or switch off the fuse in the fuse box.
Contact the after-sales service.
▯ Penetrating moisture may cause an electric
shock. Do not use any high-pressure
cleaners or steam cleaners.
▯ A defective appliance may cause electric
shock. Never switch on a defective
appliance. Unplug the appliance from the
mains or switch off the circuit breaker in
the fuse box. Contact the after-sales
service.
▯ Cracks or fractures in the glass ceramic
may cause electric shocks. Switch off the
circuit breaker in the fuse box. Contact the
after-sales service.
▯
Risk of electric shock!
Risk of electric shock!
Risk of electric shock!
Risk of fire!
Hazard due to magnetism!
Hot oil and fat can ignite very quickly.
Never leave hot fat or oil unattended. Never
use water to put out burning oil or fat.
Switch off the hotplate. Extinguish flames
carefully using a lid, fire blanket or
something similar.
▯ The hotplates become very hot. Never
place combustible items on the hob. Never
place objects on the hob.
The removable control element is magnetic
and may affect electronic implants, e. g. heart
pacemakers or insulin pumps. For people with
electronic implants: never carry the control
element in clothing pockets. The minimum
distance to heart pacemaker should be 10 cm.
▯
Risk of fire!
Risk of fire!
4
Risk of injury!
Causes of damage
Saucepans may suddenly jump due to liquid
between the pan base and the hotplate.
Always keep the hotplate and saucepan bases
dry.
Caution!
–
Rough pot and pan bases scratch the ceramic.
–
Avoid boiling pots dry. This may cause damage.
–
Never place hot pots or pans on the control panel,
the display area or the surround. This may cause
damage.
–
Damage can occur if hard or pointed objects fall
on the hob.
–
Aluminium foil and plastic containers melt on hot
hotplates. Oven protective foil is not suitable for
your hob.
Overview
The following table provides an overview of the most
frequent kinds of damage:
Damage
Cause
Action
Stains
Food spills
Remove spills immediately with a glass scraper.
Unsuitable cleaning agents
Only use cleaning agents which are suitable for ceramic
Salt, sugar and sand
Do not use the hob as a work surface or storage space.
Scratches
Rough pot and pan bases scratch the Check your cookware.
ceramic.
Discolouration
Blisters
Unsuitable cleaning agents
Only use cleaning agents which are suitable for ceramic
Pan abrasion (e.g. aluminium)
Lift the pots and pans when moving them.
Sugar, food with a high sugar content Remove spills immediately with a glass scraper.
5
Environmental protection
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly
manner.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning used
electrical and electronic appliances (waste
electrical and electronic equipment - WEEE). The
guideline determines the framework for the return
and recycling of used appliances as applicable
throughout the EU.
Tips for saving energy
▯
Always use a correctly fitting lid for the
pan.Cooking without the lid requires four times as
much energy. A glass lid allows you to observe
the cooking without having to lift the lid off.
▯
Use pots and pans with level bases. Using
cookware with unlevel bases increases energy
consumption.
▯
The diameter of the base of your pot or pan
should match the size of the hotplate. In
particular, if pots that are too small are placed on
a hotplate, energy is wasted. Please note:
Cookware manufacturers often specify the
diameter of the top of the pan. This is usually
bigger than the diameter of the base of the pan.
▯
Use a small pan for small quantities of food. A
large saucepan containing little food requires
more energy.
▯
Use only a little water when cooking. This will
save energy. It also preserves vitamins and
minerals in vegetables.
▯
Switch to a lower heat setting as soon as
possible.
▯
Use the residual heat of the hob. For longer
cooking times, you can switch the hotplate off as
early as 5 - 10 minutes before the end of the
cooking time.
6
Getting to know your appliance
The instruction manual is the same for various
different hobs. An overview of the models with their
dimensions is given on page 2.
The control panel
‚
´
‚
ž
É
³Å
Sensor buttons
Displays
ÿ
ð
Activate dual-circuit cooking zone
ò
Activate triple-circuit cooking zone
p/q
Activate extended cooking zone
Main switch
Automatic boil start
Options menu
Activation
Childproof lock
Frying sensor function
Timer
A
t
+
K
q
M
Displays
Touch keys
When you touch a symbol, the respective function is
activated.
Notes
‚-Š
Heat settings
s
Timer
‹‹
Cooking time
‘
Automatic boil start
‒
The settings will remain unchanged if you touch
several symbols at once. This allows you to wipe
up spills on the control panel.
‒
Always keep the touch keys dry. Moisture reduces
their effectiveness.
The hotplates
Hotplate
Activating and deactivating
$
Single-circuit hotplate
ð
Dual-circuit hotplate
To activate: select the cooking zone with the magnetic knob, set the heat setting
within 5 seconds, touch the @ activation symbol within the next 5 seconds. To deactivate: select the cooking zone, touch the @ activation symbol within 5 seconds.
ò
Triple-circuit hotplate
To activate: select the cooking zone with the magnetic knob, set the heat setting
within 5 seconds, touch the @ activation symbol repeatedly within the next 5 seconds
until the required size is selected. To deactivate: select the cooking zone, touch the
@ activation symbol within 5 seconds.
p/q
Extended cooking zone
To activate: select one of the two extended cooking zones with the magnetic knob,
set the heat setting within 5 seconds, touch the @ activation symbol within the next 5
seconds. To deactivate: select the cooking zone, touch the @ activation symbol
within 5 seconds.
When the hotplate is activated: the corresponding indicator lights up.
7
Residual heat indicator
The cooktop has a residual heat indicator for each
cooking zone.
If a zero continues to be displayed, the cooking zone
is still too hot. It may be used, for example, to keep a
small meal warm or to melt cooking chocolate. The
display remains lit until the cooking zone has cooled
sufficiently.
Special accessories
Twistpad with magnetic knob
The twistpad is the settings area in which you use the
magnetic knob to select a cooking zone and to set the
heat setting. The magnetic knob automatically centres
itself in the twistpad.
The magnetic knob is placed on the twistpad. You can
activate the corresponding cooking zone by pushing
the magnetic knob in the direction of the cooking zone
symbol. Turn the magnetic knob to set the heat
setting.
BT 481-000: Metal roasting dish made from cast
aluminium with lid, non-stick, for 18 x 41.5 cm cooking
zone.
¯
¯
±
¯
¯
¯
¯
¯
Removing the magnetic knob
The magnetic knob is removable. This makes it easier
to clean the cooktop.
If you remove the magnetic knob while the cooktop is
in operation, all cooking zones are switched off after
3 seconds.
m
Risk of fire!
If you place a metal object on the twistpad within
3 seconds, the cooktop may continue to heat up. For
this reason, always switch off the cooktop using the
main switch.
Storing the magnetic knob
The magnetic knob contains a strong magnet. Keep
the magnetic knob away from magnetic data carriers,
such as video cassettes, diskettes, credit cards or
cards with magnetic strips. The data these contain
could otherwise be wiped. They can also cause
interference in television sets and monitors.
m
Warning!
For wearers of electronic implants, e.g. pacemakers or
insulin pumps. Implants could be affected by magnetic
fields. You must therefore never carry the magnetic
knob in a pocket in your clothing. They must be kept at
least 10 cm from pacemakers.
Note: The magnetic knob has a magnet. Metal
particles which stick to the underside can scratch the
ceramic cooktop. Always wipe the magnetic knob
thoroughly.
8
Changing the heat setting
Setting the cooktop
This section familiarises you with how to make
settings on your cooktop. The table contains cooking
methods and examples for the different heat settings.
Switching the cooktop on and off
The main switch is used to switch the cooktop on and
off.
Select the cooking zone. Use the magnetic knob to set
the required heat setting.
Switching off the cooking zone
Select the cooking zone. Use the magnetic knob to set
it to 0. The cooking zone switches off. After approx. 5
seconds, the residual heat indicator appears.
To switch on: touch the # symbol. A signal sounds.
The lamp above the main switch and the ‹ displays
lights up. The cooktop is ready for use.
To switch off: touch the # symbol until the light above
the main switch goes out. All cooking zones are
switched off. The residual heat indicator remains on
until the cooking zones have cooled down sufficiently.
Notes
‒
The cooktop switches off automatically if all
cooking zones have been switched off for more
than 20 seconds.
‒
The settings remain stored for 5 seconds after the
cooktop has been switched off. If you switch it on
again during this time, the cooktop will operate
using the previously stored settings.
Setting the heat setting
The hob must be switched on with the main switch.
Each cooking zone has 9 heat settings with
intermediate settings in between. A dot appears next
to the heat setting display to indicate an intermediate
setting.
Heat setting 1 = lowest output
Heat setting 9 = highest output
1
Select the cooking zone. Do this by pushing the
magnetic knob towards the required cooking zone
symbol.
2
Centre the magnetic knob on the twistpad again.
¯
3
¯
¯
¯
¯
Within the next 5 seconds, turn the magnetic
knob until the desired heat setting appears in the
heat setting display.
A signal sounds to confirm the setting after a few
seconds.
9
Settings table
The settings areas are the same for all cooking zones.
Each cooking zone has 9 settings and intermediate
settings. To quickly reach the required temperature,
use the quick boil timer or use heat setting 9. You
must then always switch back to the required heat
setting.
The values in the settings table must only be used as a
guideline because more or less heat is required
depending on the type and state of the food as well as
the size of the pan and how full it is.
Heat setting
Cooking methods
Examples
9
Bringing to the boil
Water
Searing
Meat
Heating
Fat, liquids
Bringing to the boil
Soups, sauces
9-8
Blanching
Vegetables
8-6
Roasting
Meat, potatoes
6-5
Roasting
Fish
7-6
Baking
Dishes made with flour, egg-based dishes
Ongoing cooking in open container
Pasta, liquids
Browning
Flour, onions
Toasting
Almonds, bread crumbs
Rendering
Bacon
Reducing
Stock, gravy
5-4
Simmering in open container
Dumplings, soup garnishes, boiling meat, poached eggs
4-3
Simmering in open container
Cooked sausages
5-4
Steaming
Vegetables, potatoes, fish
Steam
Vegetables, fruit, fish
Braising
Roulades, roasts, vegetables
3-2
Stewing
Goulash
4-3
Simmering with closed lid
Soups, sauces
3-2
Defrosting
Frozen food
3-2
Steeping
Rice, pulses
Thickening
Egg-based dishes
Heating/keeping warm
Soups, stews, vegetables in sauces
Melting
Butter, chocolate
6-5
2-1
10
Quick boil timer
Frying sensor function
All of the cooking zones have quick boil timer. By
activating the quick boil timer, the heat setting that is
set increases to the maximum setting for a few
minutes. This means that the simmering temperature
for the food is reached sooner.
The triple circuit cooking zone has a frying sensor
function. If you operate the hotplate using the frying
sensor function, the sensor regulates the temperature
of the pan. The hotplate only heats up when
necessary. This will save energy. Oil and fat do not
overheat.
Once the boiling time has elapsed, the appliance
automatically switches to the heat setting that was set.
You can set the duration of the boiling time.
You cannot activate the quick boil timer in heat setting
9.
Switching on the quick boil timer
The frying sensor function can only be operated with
the centre area. When the frying sensor function is
set, the centre area is switched on automatically.
Notes
‒
Never leave fat unattended while you are heating
it.
‒
Place the pan in the centre of the cooking zone.
Make sure that the base of the pan has the
correct diameter.
‒
Do not place a lid on the pan, otherwise the
regulator will not work. You can use a spatter
guard.
‒
Select the min frying setting if you are using olive
oil . If you are using an oil or fat that can be
heated to high temperatures, e.g. refined plant
oils or clarified butter, you can use all the frying
settings.
The cooktop must have been switched on at the main
switch.
1
Select the cooking zone. Do this by pushing the
magnetic knob in the direction of the
corresponding cooking zone symbol.
2
Centre the magnetic knob again on the twistpad.
3
Use the magnetic knob to select the required heat
setting within 5 seconds.
The selected heat setting lights up on the heat
setting display.
4
Touch the A symbol within 5 seconds.
The heat setting display and A light up alternately.
Pans for the frying sensor function
5
Within 5 seconds, you can change the boiling
time. The default setting is 3 minutes. You can use
the magnetic knob to set a time of between 1 and
20 minutes.
You can buy a frying pan that is perfectly suited to
frying with the sensor cooking system from your
specialist electrical retailer or from
www.gaggenau.com
You can set different boiling times for each individual
cooking position. If you reactivate the quick boil timer,
the last boiling time that you set remains as the
presetting.
After the food has been brought to the boil, only the
ongoing cooking setting remains lit on the display.
Switching off the quick boil timer
Availability and online buying possibilities differ
depending on the country.
The frying settings given below have been adjusted to
the system pans.
Note: The sensor frying system may also work with
other pans. Test the pans first with low frying settings,
changing as necessary. The pans may overheat on
high frying settings.
You can also switch off the quick boil timer before the
boiling time has elapsed (e.g. because the food is
cooking too quickly).
1
Select the cooking zone.
2
Touch the A symbol within 5 seconds.
The cooktop switches back to the heat setting
that was set.
11
Frying settings
Frying setting
Temperature
Suitable for
max
high
e.g. potato fritters, fried potatoes and rare steaks.
med plus
medium ­ high
e.g. thin food, such as escalope, frozen breaded products, strips of meat, vegetables
med
low - medium
e.g. thick food, such as rissoles and sausages, fish
min
low
e.g. omelettes, food fried in butter, olive oil or margarine
Switching on the frying sensor
function
Switching off the frying sensor
function
Select the appropriate frying setting from the table.
Touch the p symbol. The frying sensor function is
switched off, the centre area of the cooking zone
remains activated.
The hob must be switched on.
1
Place the pan on the cooking zone.
2
To select the cooking zone: push the magnetic
knob towards the required cooking zone symbol.
¯
3
¯
¯
¯
¯
Touch the p symbol within 5 seconds.
¯
4
¯
¯
¯
¯
Turn the magnetic knob until the required frying
setting flashes in the display.
¯
¯
¯
¯
The centre area is automatically activated. The
cooking zone heats up. The selected frying
setting flashes in the heat setting display.
5
12
After the signal sounds, add the frying fat and
food to the pan.
The selected frying level lights up in the heat
setting display. Observe the time from the
settings table. Turn the food as usual.
Frying table
The table shows which frying setting is suitable for
which dish. The frying time may depend on the type,
weight, thickness and quality of the food.
The frying settings given have been adjusted to
Gaggenau frying sensor pans. The frying settings may
vary if you use different pans.
Frying setting Total frying time after the signal sounds
Meat
Veal schnitzel, plain or breaded (1.5 cm thick)
Fillet (pork, beef or veal), medium (2.5 cm thick)
Chop (pork or lamb, 2 cm thick)
Beef steak, rare (3 cm thick)
Beef steak, medium or well-done (3 cm thick)
Saddle of lamb, medium (1.5 - 2.5 cm thick)
Chicken breast (2 cm thick)
Sausage, precooked or raw (dia. 1-3 cm)
Hamburgers / rissoles (1-3 cm thick)
Strips of meat
Minced meat
Bacon
med plus
med plus
med
max
med plus
med
med
med
med
med plus
med plus
min
6-10 minutes
6-10 minutes
10-17 minutes
6-8 minutes
8-12 minutes
10-15 minutes
10-20 minutes
8-20 minutes
6-30 minutes
7-12 minutes
6-10 minutes
5-8 minutes
Fish
Fish, whole
Fish fillet, plain or breaded
Salmon steak (2.5 cm thick)
Tuna steak , well-done (2.5 cm thick)
Langoustines, prawns
Scallops
med
med/med plus
med
med
med plus
med plus
15-25 minutes
10-20 minutes
8-12 minutes
8-12 minutes
4-8 minutes
5-8 minutes
Egg dishes
Pancakes, crepes
Omelettes
Fried egg
Scrambled egg
French toast
med plus
min
min/med plus
min
med
fry consecutively
fry consecutively
2-6 minutes
2-4 minutes
fry consecutively
Potatoes
Potatoes fried from unpeeled boiled potatoes
Potatoes fried from raw*
Potato fritters
Rösti
Glazed potatoes
max
med
max
min
med plus
6-12 minutes
15-25 minutes
fry consecutively
30-40 minutes
10-15 minutes
Vegetables
Garlic, onions
Courgettes, aubergines
Pepper, green asparagus, carrots
Mushrooms
Glazed vegetables
min
med
med
med plus
med plus
2-10 minutes
4-12 minutes
4-15 minutes
10-15 minutes
6-10 minutes
Frozen products
Fish fillet, plain or breaded (0.5-1 cm thick)
Stir fries/stir-fried vegetables
Spring rolls (2.5-3 cm thick)
med
min
med
10-20 minutes
8-15 minutes
10-30 minutes
Miscellaneous
Rice, pasta
Croutons
Toasting almonds / other nuts / pine nuts*
max
med
min
8-15 minutes
6-10 minutes
3-7 minutes
* Place in a cold pan
13
Childlock
Timer
You can use the childlock to prevent children from
switching on the cooking positions.
You can use the integrated timer to select a time
between 1 and 90 minutes in 1-minute levels and, after
this time, the cooking zone is switched off (cooking
timer). You can set the cooking time for each cooking
zone.
Note: To ensure that you can activate the childlock,
you must first enable this function in the options menu
(see Options menu).
Activating the childlock
1
2
Switch on the cooktop at the main switch. Do not
select any cooking zones or the timer.
After approx. 10 seconds, the K symbol is
displayed above the @ symbol.
Setting the automatic cooking time
The hob must be switched on with the main switch.
1
Select the cooking zone. Within 5 seconds, set
the required heat setting.
2
Within 5 seconds, touch the M symbol.
Touch the @ symbol. A signal sounds. Press and
hold the @ symbol until another signal sounds.
¯
The cooktop switches off. The K display flashes for
approximately 10 seconds. The childlock is activated.
±
¯
¯
¯
¯¯
Deactivating the childlock
To deactivate the childlock again, proceed in the same
way as for activating the childlock.
‹‹ lights up on the timer display. s lights up
above the heat setting display.
3
Use the magnetic knob to set the required
cooking time of between 1 and 90 minutes.
¯
±
¯
¯
¯
›‚
When the cooking time has elapsed, the cooking zone
switches off. ‹ flashes in the heat setting display. A
signal sounds for three minutes. ‹‹ flashes in the
timer display. Touch any sensor button. The displays
go out and the audible signal ceases.
To find out the remaining cooking time for a cooking
zone, select the cooking zone. The cooking time is
displayed for 5 seconds.
If you have set a cooking time for several cooking
zones, the shortest cooking time set will be shown
counting down in the timer display. A s segment of a
circle lights up on the timer symbol for this cooking
zone.
Note: If you have set ™†£. in the options menu
(unlimited selection time for cooking zone selection),
the timer is called up if you touch the M symbol once.
Touch the M symbol a second time to call up the
automatic cooking time function for the selected
cooking zone.
14
Changing the cooking time
Select the cooking zone. Touch the M symbol.
Change the cooking time.
Cancelling prematurely
Select the cooking zone. Touch the M symbol. Set it
to ‹‹. The display goes out after a few seconds. The
cooking zone continues to heat with the selected heat
setting.
Note: The cooking timer is no longer active if there is
a power cut.
Safety shut-off
A cooking zone is automatically switched off if the
setting is not changed for a long time. The time when
the safety shut-off is activated depends on the heat
setting selected (1 to 10 hours).
The cooking zone is switched off and the residual heat
indicator lights up on the heat setting display until the
cooking zone cools down.
You can switch the cooking zone back on again as
normal.
Short-term timer
You can also use the integrated timer independently of
the function of the appliance as a short-term timer.
The short-term timer can also be used if all of the
cooking zones are switched off.
Setting the short-term timer
The cooktop must have been switched on at the main
switch. No cooking zone should have been selected.
1
Touch the M symbol.
‹‹ lights up on the timer display.
2
Use the magnetic knob to set the required
cooking time.
If all of the cooking zones are switched off, the
appliance goes into stand-by mode. Only the timer
display lights up.
When the cooking time has elapsed, the ‹‹ display
flashes. A signal sounds for 3 minutes. Touch the M
symbol. The display goes out and the audible signal
ceases.
To correct the cooking time, touch the M symbol and
use the magnetic knob to change the cooking time.
Note: The short-term timer no longer functions after a
power cut.
15
Options menu
In the options menu, you can adjust the following
functions for your cooktop:
▯
Activation
▯
Key tones
▯
Childlock
▯
Reset all values
▯
Selection time for selecting the cooking zone
Settings in the options menu
This table contains all of the functions and information
for making settings:
Display
Function
Information about making settings
™‚
Activation
™ƒ
Button tones
The activation can be set individually for each cooking
The activation is not activated when you switch on zone that has activation. First, use the magnetic knob to
select the required cooking zone. Then use the @ symbol
the hob, and it can be activated.*
to select the required setting.
A The activation is activated when you switch on
the hob, and can be deactivated.
¯ When you switch on the hob, the last state that
was used is set.
Use the magnetic knob to select the required setting. On
the display, a dot appears beside the selected setting.
Note: This setting does not affect the audible timer signals,
warning signals or the main switch signal.
‹. Button tones off.
‚. Button tones on.*
™„
To be able to use the child lock, you must first enable this
function in the options menu.
Use the magnetic knob to select the required setting. On
the display, a dot appears beside the selected setting.
Child lock
‹. Child lock cannot be activated.*
‚. Child lock can be activated.
™…
Reset all values
™†
Selection time for selecting the cooking zone
You can use this function to reset all of the values in the
š Values do not correspond to the factory setting. options menu and the boiling times to their factory settings.
Reset all values: Use the magnetic knob to select š. On
the display, a dot appears beside š.
If you select a cooking zone, you must set the heat setting
within the selection time. If the selection time is set to endless, you can change the heat setting at any time without
having to reselect the cooking zone.
£ Selection time 5 seconds.*
£. Endless selection time.
*Factory setting
Selecting the options menu
1
2
5
Switch on the hob using the main switch. Do not
select a cooking zone. The timer must be
switched off.
After approx. 10 seconds, the ? symbol appears
above the A symbol.
Touch the A symbol until two signals sound.
¯
¯
¯
¯
¯
3
Touch the A symbol repeatedly until the required
option appears.
4
Use the @ symbol or the magnetic knob to select
the required setting.
16
To save the settings and exit the options menu,
touch the A symbol until two signals sound.
Notes
‒ A signal will not sound if ™ƒ-‹. Button tones
off has been set.
‒ To exit the options menu without saving the
settings, touch the # main switch.
Cleaning and care
The information in this section provides help on how
best to care for your hob.
Suitable maintenance and cleaning products can be
purchased from the after-sales service or in our eShop.
Ceramic
Clean the hob after each use. This will prevent spills
from burning onto the ceramic.
Only clean the hob when it has cooled down
sufficiently.
Use only cleaning agents which are suitable for
ceramic. Follow the cleaning instructions on the
packaging.
Never use:
▯
Undiluted washing-up liquid
▯
Detergent intended for dishwashers
▯
Scouring agents
▯
Harsh cleaning agents such as oven spray or
stain remover
▯
Abrasive sponges
▯
High-pressure cleaners or steam jet cleaners
Ground-in dirt can be best removed with a glass
scraper, available from retailers. Please note the
manufacturer's instructions.
You can also obtain a suitable glass scraper from our
after-sales service or from the e-Shop.
Hob surround
To prevent damage to the hob surround, observe the
following instructions:
▯
Use only hot soapy water.
▯
Wash new sponge cloths thoroughly before use.
▯
Do not use any sharp or abrasive agents.
▯
Do not use the glass scraper.
Magnetic knob
Only wipe the magnetic knob with lukewarm soapy
water. Do not use harsh or abrasive agents. The
magnetic knob will be damaged if it is cleaned in the
dishwasher or immersed in soapy water.
17
Rectifying minor faults yourself
Faults often have simple explanations. Please read the
following notes before calling the after-sales service.
Fault
Measure
The hob does not work.
Check the household fuse for the appliance. Check whether there is a power cut
by trying other electronic appliances.
You cannot switch the hob on. The main
There is an object on one of the touch keys (e.g. a tea towel). Remove the object
switch flashes repeatedly when you touch and switch the hob on as usual.
it.
The hob works, but the cooking zones do
not heat up. A dot lights up on the timer
display.
The appliance is in demonstration mode after it is first connected. Disconnect
the appliance from the mains at the household fuse for at least 10 seconds.
Reconnect the appliance to the mains and carry out the following steps within 3
minutes:
1 Switch on the hob at the # main switch. The timer must be switched off.
2 Press and hold the @ symbol. In addition, touch the # main switch within 3
seconds.
The hob switches off.
3 Take your finger away from the main switch.
4 Take your finger away from the @ symbol.
An audible signal sounds. The dot on the timer display goes out.
The hob has switched itself off.
The main switch was touched accidentally. You can now switch the hob on
again.
A cooking zone was operating without interruption for too long. The safety shutoff was activated. You can switch the cooking zone on again.
Ҥ display and numbers
There is a fault in the electronics. Switch the appliance off and back on again
using either the household fuse or the circuit breaker in the fuse box (reset). If
the display appears again, disconnect the appliance from the mains using the
household fuse. Contact the after-sales service.
Alternating • and ˆ display
A cooking zone that was set to heat setting 8 or 9 is too hot. The power for this
cooking zone was reduced to heat setting 7. When • goes out, you can set the
cooking zone to a higher setting again.
• display
The appliance is too hot and a cooking zone has switched itself off. Remove the
pot from the heat. • goes out once the cooking zones have cooled down sufficiently.
Wait a few minutes until the cooking zones have cooled down. If • appears
again after switching on, the hob is still too hot. Switch off the cooking zones
and allow them to continue to cool down.
”‚ display
Electronics fault in one of the cooking zones
Switch the appliance off and, after a few minutes, back on again using either the
household fuse or the circuit breaker in the fuse box (reset). If the display
appears again, disconnect the appliance from the mains using the household
fuse. Call the after-sales service.
”… display
The control panel is too hot and the appliance has switched itself off. Check
whether there is a hot pan on the control panel.
Remove the pan from the control panel. Wait a few minutes until the control unit
has cooled down. If ”… appears again after switching on, disconnect the appliance from the mains using the household fuse. Call the after-sales service.
”ˆ display
The frying sensor is faulty. Acknowledge the fault message by touching a touch
key. Call the after-sales service. It is possible to cook without the frying-sensor
function.
18
After-sales service
Our after-sales service is there for you if your
appliance should need to be repaired. We are
committed fo find the best solution also in order to
avoid an unnecessary call-out.
E number and FD number:
Please quote the E number (product number) and the
FD number (production number) of your appliance
when contacting the after-sales service. The rating
plate bearing these numbers can be found on the
appliance certificate.
Please note that a visit from an after-sales service
engineer is not free of charge, even during the
warranty period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
GB
0844 89289988
Calls from a BT landline will be charged at up to
3 pence per minute. A call set-up fee of up to
6 pence may apply.
IE
01450 2655
AU
1300 727 421
NZ
09 477 0492
Trust the expertise of the manufacturer, and rest
assured that the repair will be carried out by trained
service technicians using original spare parts for your
domestic appliance.
19
9000680199 en (940404)
*9000680199*
Gaggenau Hausgeräte GmbH
Carl-Wery-Straße 34
D-81739 München
www.gaggenau.com
Download PDF
Similar pages