Tatami Mats
Made In Japan
DAIKEN's Tatami facing products exhibit excellent antimold performance even
under severe conditions, allowing less mold growth than general rush-based
Tatami facing.
Resistant to Sunburn and Color Fading for Longlasting Beauty
MD F
Resistant to Mold and Mites
Fading caused by UV radiation is a major concern for Tatami facing. DAIKEN's
Tatami facing products are almost free of fading, ensuring a long-lasting beauty.
Light Resistance Test Results
Mold Resistance Test Results
● Tested by exposing the specimen to UV radiation
equivalent to approx. 2 years
Ceiling
● Tested by cultivating mold for 28 days at a
temperature of 28℃ and a humidity of 97%
(Photos showing mold grown after 14 days)
Rush-based Tatami Facing DAIKEN's Tatami Facing
Approx. 3 Times the Resistant of General Rushbased Tatami Facing
Stain Resistant Tatami Mat for Ease of Cleaning
It's always a concern for families with children and pets to protect Tatami mats
from damage.DAIKEN's Tatami facing products have 3 times the resistance of
general rush-based Tatami facing, ensuring a long-lasting beauty.
DAIKEN's resin-coated Tatami mats have excellent water-repellency, allowing
you to clean drink spills just by wiping them away.
F l o ori ng
Rush-based Tatami Facing DAIKEN's Tatami Facing
Wear Resistant Test Results
Tested using abrasive paper #180 to check the wear
condition after 100 revolutions with a load of 250 g x 2
I nt eri or Door
Rush-based Tatami Facing DAIKEN's Tatami Facing
YQ51
Cabinet
820
0
82
W a ll
<02 YELLOW>
YQ5102-2 (2 pieces per package)
YQ5102-3 (3 pieces per package)
<03 IVORY>
YQ5103-2 (2 pieces per package)
YQ5103-3 (3 pieces per package)
<04 BROWN>
YQ5104-2 (2 pieces per package)
YQ5104-3 (3 pieces per package)
<05 BROWN>
YQ5105-2 (2 pieces per package)
YQ5105-3 (3 pieces per package)
<06 DARK>
YQ5106-2 (2 pieces per package)
YQ5106-3 (3 pieces per package)
B u il d i n g Acou st ic s
<01 GREEN>
YQ5101-2 (2 pieces per package)
YQ5101-3 (3 pieces per package)
Ot he r s
Specifications
▷ Machine-made Japanese Washi paper* fabrics
(DAIKEN's Tatami facing)
Back surface
▷ Slip-proof sheet
Formaldehyde regulations ▷ Labeling exempted product
Front surface
＊Machine-made Japanese Washi paper is used. This is not hand-made Washi paper made of hybrid mulberry, oriental paperbush, etc.
■Cross-sectional View
13
Dimensions
▷ 13 mm thick, 820 x 820 mm
Packing material, quantity ▷ Cardboard case
(2 or 3 pieces per package)
Weight
▷ Approx. 3 kg per piece
Base material
▷ Insulation board
Machine-made Japanese Washi paper* fabrics
Protective layer
Cushioning layer
Insulation board
Thickness adjustment layer
Slip-proof sheet
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
32
Engineered Doors
Made In Japan
MD F
Ceiling
F l o ori ng
I nt eri or Door
Daiken Engineered Doors improve your quality of life.
Cabinet
Short-stroke Lever Handle
Easy-to-clean Surface Material
W a ll
B u il d i n g Acou st ic s
Ot he r s
Gentle touch lever handle allows you to open and close the door
even when holding laundry or shopping bags in your arms.
Improved stain resistance by use of a wipeable surface sheet*
enables easy removal of marker stains.
Even when your hands are full with
shopping bags or laundry, gently
touching this handle opens and closes
the door for you. This is an easy-to-use
lever handle suitable for the elderly and
those with weak physical strength.
DAIKEN's doors feature easy removal of
difficult-to-remove stains such as marker
scribbles by children and oil stains,
saving the workload of cleaning.
Marker Stain
＊Adopted as the surface sheet for the door, frame, and
parting edges of the HP/HB series.
Oil Stain
33
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
Soft closing function for Sliding/Hanging Door System
MD F
Hanging Door System
Ceiling
Soft closing mechanism allows door to move slowly when
closing the sliding doors suppresses the risk of door rebounding,
slamming sound, and finger pinching.
Hanging doors make your daily
cleaning work easy because of no
floor rails subject to dust
accumulation. Moreover, their stepless
floor surface is friendly to everyone
because of ease of passage for
wheelchair users and a low risk of
stumbling for toddlers and the
elderly.
DAIKEN's sliding/hanging doors have the Easy Close
feature, which works to slow down the door just before
it completely closes to suppress the risk of door
rebounding, slamming sound, and finger pinching, even
if you slammed the door shut carelessly.
Self-Closing Feature
I nt eri or Door
Open
Close
＊3-leaf double, 2-leaf single, and 3-leaf
Self-Closing Feature
single sliding door systems require
When the door enters the working range of
the Self-Closing feature, it is pulled in
slowly, held firmly, and then closed.
directly installed floor rails.
Cabinet
2-leaf Interlocking Sliding Door System
F l o ori ng
Top rail hanging doors
fulfill the need for a flat, large room.
Pet Door System
W a ll
Pet doors, even the door is closed or
lock. The pet's gate allow your pet
access & exist the house easily with
no hassle.
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
Ot he r s
Our 2-leaf interlocking sliding doors
provide a wider passage way even in
narrow room arrangement because
the first leaf moves in conjunction
with the second leaf. They are ideal
for both wheelchair users and
caregivers because of ease of travel
between rooms.
Pet doors have a special gate for pets,
allowing cats and dogs to enter and exit the house as they please.
B u il d i n g Acou st ic s
Wider door access with slight door movement in the room.
34
Engineered Doors
Made In Japan
MD F
JP Series
Unique design delivering a new sense of beauty of
Wa, combined with premium ease of use, creates a
high-quality living space.
Colo r a nd Tex t ure Va r ia t ion
Ceiling
NS
NK
NT
＊For the frame and parting edges, the color and texture of
TH <MONO WHITE> for the HP series is available.
0J
1J
2J
3J
4J
5J
Common Specifications for Swing/Sliding/Hanging Doors (Door)
Base material
Surface
Structure
Formaldehyde regulations
▷
▷
▷
▷
MDF
Natural wood plywood coating finish
Flush construction (partially solid core)
F4-rank according to Labeling Guidelines for Housing Components
F l o ori ng
Common Specifications for Swing/Sliding/Hanging Doors (Frame and Parting Edges)
Base material
▷ MDF (Plywood or MDF for frame core material)
Surface
▷ Olefin sheet lamination
Formaldehyde regulations ▷ Unregulated parts*
＊Although these parts are not regulated according to Article 20-7 of the Enforcement
Ordinance of Construction Standard Law, either some labeling exempted material or JIS/JAS F4-rank material certified by the Minister of Land, Infrastructure,
Transport and Tourism is used for interior finishing.
HP Series
I nt eri or Door
Precious Wood Texture
Six popular texture patterns for interior use are selected.
Each pattern is a realistic representation of color, grain,
texture of the corresponding precious wood.
Colo r a nd Tex t ure Va r ia t ion
HH
HL
Cabinet
HT
HW
HA
0P
1P
2P
3P
4P
5P
6P
7P
8P
0C
1C
2C
0S
1S
2S
3S
4S
5S
HK
Glossy Wood Texture
Glossy texture delivers elegance to your interior.Mirror
finished lineup now includes additional grain texture
variations.
Colo r a nd Tex t ure Va r ia t ion
W a ll
LH
LL
LT
LW
B u il d i n g Acou st ic s
Leather Texture
Faithful representation of natural leather texture
satisfies the passion of mature adults for quality.
Colo r a nd Tex t ure Va r ia t ion
＊For the frame and parting edges, the color and texture variations of TH <MONO WHITE> for the HB series are available.　＊For 0S, 1S, 2S, 3S, 4S, and 5S, only precious wood texture variations are available.
XH RIPPLE
<WHITE>
XD RIPPLE
<DARK>
Ot he r s
Mat Texture
Dull and soft monotone mat texture delivers a
sophisticated and prestigious atmosphere.
Colo r a nd Tex t ure Va r ia t ion
TH
35
Specifications (Door)
Base material
Surface
Structure
Formaldehyde regulations
▷
▷
▷
▷
MDF
Olefin/polysand sheet/mirror surface coating
Flush construction
F4-rank according to Labeling Guidelines for Housing Components
What's
polysand
sheet?
Polysand sheet is a multi-layer sheet with a sandwiched
moisture-proof polyethylene resin layer and used as a surface
material for our door products. It effectively reduces the warping of
a door by suppressing the moisture transfer in and out of the wood
fitting that occurs as the indoor temperature and humidity change.
Specifications (Frame and Parting Edges)
Base material
▷ MDF (Plywood or MDF for frame core material)
Surface
▷ Olefin sheet lamination
Formaldehyde regulations ▷ Unregulated parts*
＊Although these parts are not regulated according to Article 20-7 of the
Enforcement Ordinance of Construction Standard Law, either some labeling
exempted material or JIS/JAS F4-rank material certified by the Minister of Land,
Infrastructure, Transport and Tourism is used for interior finishing.
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
MD F
HB Series
A wide variety of designs and ultimate ease of use fulfill
the demand for an ideal door for the whole family.
Colo r a nd Tex t ure Va r ia t ion
MT
ML
MW
Ceiling
WH
MA
00
01
06
08
21
24
C4
G1
G5
G8
G9
U0
U8
Y4
Y8
Y1
Y5
S5
S6
S7
D1
D2
D3
D4
D5
D6
41
48
46
55
G7
76
79
MK
＊For MK, all products are produced on order.
F l o ori ng
I nt eri or Door
Cabinet
W a ll
B u il d i n g Acou st ic s
Specifications (Door)
▷
▷
▷
▷
MDF
Polysand sheet lamination
Flush construction (partially solid core)
F4-rank according to Labeling Guidelines for Housing Components
What's
polysand
sheet?
Polysand sheet is a multi-layer sheet with a sandwiched
moisture-proof polyethylene resin layer and used as a surface
material for our door products. It effectively reduces the warping of
a door by suppressing the moisture transfer in and out of the wood
fitting that occurs as the indoor temperature and humidity change.
Specifications (Frame and Parting Edges)
Base material
▷ MDF (Plywood or MDF for frame core material)
Surface
▷ Olefin sheet lamination
Formaldehyde regulations ▷ Unregulated parts*
＊Although these parts are not regulated according to Article 20-7 of the
Enforcement Ordinance of Construction Standard Law, either some labeling
exempted material or JIS/JAS F4-rank material certified by the Minister of Land,
Infrastructure, Transport and Tourism is used for interior finishing.
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
36
Ot he r s
Base material
Surface
Structure
Formaldehyde regulations
Engineered Doors
Made In China
MD F
Easy Installation
Eco-friendly Materials
Easy and hassle-free installation Of Daiken Interior Door
DAIKEN uses eco-friendly materials
Comprehensive Combination
Ceiling
Health-friendliness
● Improvement of installation quality through
product offering as a package of a door, a frame,
and parting edges
● Safe and quick installation through reduction of
secondary work in building site
● E0-level ecological building materials
● CTC certification and health certification certified products
● Ventilation feature to maintain a comfortable air environment
Environmental Protection
● Use of resin sheet materials
● Low formaldehyde emission MDF
● Plywood core materials
● Adhesives imported to Japan
● Resource circulation through use of
recycling materials
Air Ventilation
F l o ori ng
Ventilation feature maintains a comfortable
air environment.
High Quality
I nt eri or Door
● Metal fittings that passed 100,000 times of open
and close testing
● High-durability metal fittings made in Japan
● Stain-proof made-in-Japan hinge for long-term use
User Friendly Door Accessories
● Short-stroke lever handle
● Quiet latch
● Swing door damper to absorb household noise
Adjustable Latch Bracket
Adjustable latch bracket allows fine-tuning the
engagement of the latch after installation.
Short-stroke Lever Handle
Cabinet
Convenient lever handle for smooth door opening
and closing just by a 10-degree turn.
Security
● Thermally toughened glass
● Chamfered door corners for safety
● Rim lock made in Japan
● No painting work needed in building site for
low VOC and eco and health friendliness
W a ll
Quiet Latch
Safe Chamfered Corners
Well Designed Hinge for Easy Door Installation
Quiet latch ensures quiet opening and closing of the door.
Rim lock made in Japan
Door corners are round-chamfered to prevent
finger pinching and improve durability.
A well designed hinge is used for ease of
installation or removal.
Hinge made in Japan
B u il d i n g Acou st ic s
Lower Part
Upper Part
Swing Door Damper
Three-dimensional Adjustable Hinge
Swing door damper made in Japan ensures quiet opening and closing of the door.
Three-dimensional adjustable hinge facilitates fine-tuning of the door after installation.
Ot he r s
Front and Back Adjustment (3 mm)
37
Left and Right Adjustment (5 mm)
Up and Down Adjustment (6 mm)
Specifications (Door)
Specifications (Frame and Parting Edges)
MD F
Standard Series
Base material ▷ MDF
Base material ▷ MDF
▷ PVC sheet lamination
Surface
Surface
▷ PVC sheet lamination
▷ Flush construction/wood framing
Structure
<WH>
<BD>
<WU>
<BR>
<TE>
<BH>
<BV>
Ceiling
W2
W5
W6
W7
W8
W9
41
42
44F
45F
45
46
46F
48
55
56
D3
D4
D5
D6
U3
D7
D8
K1
K2
F l o ori ng
W1
I nt eri or Door
Cabinet
W a ll
Specifications (Door)
Specifications (Frame and Parting Edges)
Base material ▷ MDF
Base material ▷ MDF
▷ Olefin sheet lamination
Surface
Surface
▷ Olefin sheet lamination
▷ Flush construction/Wood framing
Structure
<KD>
<MH>
<MT>
B u il d i n g Acou st ic s
RM Series
Ot he r s
W5
W6
41
44
44F
46
46F
38
Engineered Doors
Made In Indonesia
MD F
Swing Door Features
Ceiling
❷
❸
F l o ori ng
❹
I nt eri or Door
❶ Lever Handle
Cabinet
■Short-stroke Lever Handle
Opening or closing the door requires only
rotating the handle approximately 10
degrees, compared to 30 degrees with the
conventional lever handle.
This is convenient because you can open
and close doors easily even when your
hands are full and recommended also for the
elderly and those with weak physical
strength.
W a ll
10°
B u il d i n g Acou st ic s
■Lock Types
As standard, our single swing doors have a
passage lock, while bathroom doors have an
indicator lock. The standard lock can be
optionally changed to a passage lock,
privacy lock, indicator lock, or simple
cylinder lock.
❶
❷ Adjustable Hinge
<SILVER> Standard
❶ Lever Handle
❷ Adjustable Hinge
❸ Quiet Latch
❹ Smooth Finish
■Up and Down Adjustment
Rotate the top of the lower hinge barrel on
the door with a Phillips head screwdriver to
adjust the vertical clearance between the
door and the frame within a range of 6 mm.
❸ Quiet Latch
All types of doors include a quiet latch as
standard to reduce the sound of opening and
closing the door.
<GOLD>
Option
Our doors include easy-to-hang door hinges
for quick installation. Align the barrel of the
lower hinge plate on the door with the pivot
shaft of the lower hinge plate on the frame
and lower the door (Photo ①). While pulling
down the pivot shaft of the upper hinge plate
on the door, align its barrel with the barrel of
the upper hinge plate on the frame and
release the pivot shaft. Lower the special
cover on the upper hinge plate on the door to
complete hanging the door (Photo ②).
■Left and Right Adjustment
Rotate the screws in the center of each hinge
plate on the frame with a Phillips head
screwdriver to adjust the horizontal
clearance between the door and the frame
within a range of 5 mm.
❹ Smooth Finish
All doors have smooth rounded corners to
ensure safety.
Photo①
Photo②
Passage Lock
Attached as standard to single
swing doors/double doors with
different size leafs
Privacy Lock
Recommended for bedrooms
and private rooms
Ot he r s
Indicator Lock
Attached as standard to
bathroom doors
39
■Front and Back Adjustment
Adjust the clearance between the door and
the door stopper within a range of 3 mm.
2R
＋
2C
Swing Door Damper
(Option)
Swing door damper pulls in the door slowly
to suppress the slamming sound when
closing the door.
MD F
RA Series
"Uzukuri" is a traditional Japanese wood surface finishing technique to produce a nicely raised grain texture. The RA series uses an "Uzukuri-like"
surface sheet to reproduce in reality the feel and texture inherent to natural wood, such as a unique three-dimensional effect with subtle shadows
created by changing light and the feel of a soft touch.
Ceiling
<TD>
<TG>
<MF>
<MT>
<ML>
<WG>
<WW05>
NW Series
F l o ori ng
<WH07>
<WH09>
<Black>
<Green>
<Purple>
I nt eri or Door
Specifications (Door)
Specifications (Frame and Parting Edges)
Base material ▷ Plywood
▷ PVC sheet lamination
Surface
▷ Flush construction
Structure
Base material ▷ Preservative-treated laminated wood
Surface
▷ PVC sheet lamination
＊The base material of parting edges is falcata plywood.
Cabinet
Design
W a ll
D3
6D
17
01
D1
D2
06
41
Y4
D6
U8
D4
C4
24
08
B u il d i n g Acou st ic s
00
Ot he r s
40
Storage System
Made in Japan
MD F
Ceiling
F l o o ri ng
I nteri or Door
Daiken offer various smart storage solutions
for your living room ideas
Cabinet
Living Storage System
Cabinet systems let you
choose modular cabinets
one by one based on room
arrangement or the color and
pattern of the floor or interior
doors to fit nicely with your
living space.
Closet
Combines easy sliding and opening with silent and effortless closing door
panel,all parts are designed so you can be flexible in building your wardrobe
with ample storage space.
■Door Unit
■Interior Unit
W a ll
B u il d i n g A co us ti c s
Ot he r s
41
＊The performance values and the certification labels are based on the Japanese test method and standards.
＊DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
Healthy Wall Board
Made in Japan
MD F
Healthy Indoor Air Quality start with maintaining proper
indoor relative humidity (RH) levels.
When humidity is high
When humidity is low
Air
hole
空気孔
The minute air holes in the wall material
absorb excess moisture to keep the indoor
air at the comfort and refreshing levels.
This function is useful to relieve humid
conditions especially in rainy season.
Humidity
湿気
Humidity
湿気
Air
空気孔
hole
Enlarged
拡大図
View
Enlarged
拡大図
View
さらりあ∼と
Humidity
conditioning
wall material
Humidityさ
conditioning
らりあ∼と
wall material
Releases the accumulated
moisture to keep the air moist
F l o o ri ng
Absorbs moisture in the
air to maintain dry and
refreshing conditions.
Ceiling
DAIKEN breathable wall board with waterproof feature
to keep your living space at comfortable humidity levels.
When the humidity is low, the wall material releases
the accumulated moisture to prevent the indoor environment
become too dry.
This function is useful to relieve excessively dry air in winter.
Approximately six times＊1 higher
water absorption performance than
general wallpaper finished wall.
400ml
70ml
Cabinet
Humidity
conditioning
capacity is approx.
400ml per approx.
8m2 of
wall area.
I nteri or Door
Humidity Conditioning
Building Material
Japan Construction Material &
Housing Equipment Industries Federation
This label certifies that the
product is a registered
material based on the
"humidity conditioning building
material registration/labeling
system," after examination
and registration by the
Japan Construction Material
& Housing Equipment
Industries Federation.
Humidity General cloth
finished
conditioning
wall material wall material
Comfortable humidity
at 40 to 70% is maintained.
■Comfortable Humidity Environment
Humid
Dry
40 to 70%
70 to 100%
Rough skin
Humidity
at which
humans feel
comfortable
Dew condensation
Virus multiplication
Sore throat, nose pain
Allergic disease
W a ll
0 to 40%
Mold contamination
Mite growth
Too dry and uncomfortable Healthy and comfortable Too humid and comfortable
2
＊1 When the entire wall (8m ) of a 6-mat Tatami room is DRYART
and the humidity is 75%. The conceptual diagram is based on
laboratory data obtained under the following conditions: temperature
23℃, relative humidity 50 to 75%, and test duration 12 hours.
Formaldehyde Absorption
Eliminate Pet Odor and others indoor smell in Daily Life
Absorbing Toxic Formaldehyde (Excluding WT206)
Toilet odor, garbage odor, and pet odor are major odors in daily life. DAIKEN's Humidity conditioning wall
material absorbs major chemical substances considered to be the causes of these odors and is recommended
for rooms where odors can accumulate, or families keeping pets in their homes (see the diagram on the right).
DAIKEN's humidity conditioning wall material is highly effective to reduce the concentration
of formaldehyde emission from other building materials and furniture.
Pet Odor,
Garbage Odor
( Trimethylamine)
Toilet Odor(Urine),
Pet Odor, Shoe Odor
(Ammonia)
■Formaldehyde Absorption Comparison ＊2
Toilet Odor(Stool),
Kitchen(Garbage) Odor
(Hydrogen Sulfide)
General underlayment
+
Cloth wall material
Ot he r s
Odor in Home
Entrance, Body Odor
(Acetic Acid)
B u il d i n g A co us ti c s
Deodorant
Humidity
conditioning
wall material
＊2 The guideline value of the airborne formaldehyde concentration in indoor air presented by the WHO
(World Health Organization) and Japanese Ministry of Health, Labour and Welfare is 0.08 ppm.
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
42
Healthy Wall Board
Made in Japan
MD F
WT206
Residential use
Underlayment System
Deep embossed texture of
Washi creates high-quality
living spaces with a classic look.
Square Edge Only
9mm Thick
■ Labels Related to Public Certifications and Industrial Associations
F☆ ☆ ☆ ☆
4VOC Standards Compliant
Low VOC
Humidity Conditioning
Building Material
Japan Construction Material &
Housing Equipment Industries Federation
■ Premium Features
Humidity Conditioning
ECO
2420
455
Ceiling
<LIGHT> WT2061-1
<DARK> WT2061-2
Speci fications
Dimensions
▷
Packing material, quantity ▷
Base material ▷
▷
Surface
Edge processing ▷
Certifications ▷
WT203
9
F l o o ri ng
■Cross-sectional View
9 mm thick, 455 x 2,420 mm
Cardboard case, 2 pieces (2.2㎡) per case
Insulation board
455
Machine-made Japanese Washi paper fabrics
Curling on all sides
Humidity conditioning building material, registered product name "DRYART textile"
Registration number: T09-0021
Registration agency: Japan Construction Material & Housing Equipment Industries Federation
Formaldehyde regulations ▷ F4-rank, Japan Fiberboard and Particleboard Manufacturers Association
Residential Use Underlayment System Tape Adhesive Backed Tongue & Groove Joint
9mm Thick
■ Labels Related to Public Certifications and Industrial Associations
I nteri or Door
Characteristic
three-dimensional
design
Formaldehyde Labeling
Exempted Product
4VOC Standards Compliant
Quasinoncombustible
Low VOC
Humidity Conditioning
Building Material
Japan Construction Material &
Housing Equipment Industries Federation
■ Premium Features
Deodorant
Humidity Conditioning Formaldehyde Absorption
ECO
303
606
Cabinet
<31A> WT2033-11
<31B> WT2033-12
<32A> WT2033-21
<32B> WT2033-22
＊The wall surface is flat and smooth (not rugged).
Speci fications
9 mm thick, 303 x 606 mm
■Cross-sectional View
Cardboard case, 8 pieces (1.46㎡) per case
(Short side)
303
Humidity conditioning rock wool board
Emboss processing + Acrylic emulsion coating
Tongue-and-groove joint on all sides, chamfering
9
Dimensions
▷
Packing material, quantity ▷
Base material ▷
▷
Surface
Edge processing ▷
Certifications ▷
Quasi-noncombustible material certified by the Minister of Land, Infrastructure, Transport and Tourism, QM-9817
Humidity conditioning building material, registered product name "DRYART
(Long side)
(humidity conditioning rock wool board, 9mm)" Registration number: T09-0020
Formaldehyde regulations ▷ Labeling exempted product
WT201
Residential use
B u il d i n g A co us ti c s
Distinctive
three-dimensional
marble texture
Underlayment System
Square Edge Only
6mm Thick
■ Labels Related to Public Certifications and Industrial Associations
Formaldehyde Labeling
Exempted Product
4VOC Standards Compliant
Low VOC
Humidity Conditioning
Building Material
Japan Construction Material &
Housing Equipment Industries Federation
■ Premium Features
Deodorant
Humidity Control feature Formaldehyde Absorption
ECO
606
606
606
9
W a ll
Registration agency: Japan Construction Material & Housing Equipment Industries Federation
<BEIGE> WT2011-2
<BROWN> WT2011-5
Humidity conditioning building material, registered product name "DRYART (humidity conditioning DAILITE board)"
6
■Cross-sectional View
6 mm thick, 606 x 606 mm
Cardboard case, 4 pieces (1.46㎡) per case
606
Humidity conditioning DAILITE board
Emboss processing + Acrylic emulsion coating
Chamfering on all sides
6
Ot h er s
Speci fications
Dimensions
▷
Packing material, quantity ▷
Base material ▷
▷
Surface
Edge processing ▷
Certifications ▷
Registration number: T08-0001
Registration agency: Japan Construction Material & Housing Equipment Industries Federation
Formaldehyde regulations ▷ Labeling exempted product
43
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
Residential Use Underlayment System Tape Adhesive Backed Tongue & Groove Joint
Cool color wall tiles and
design variations give
an accent to your room.
■ Labels Related to Public Certifications and Industrial Associations
Formaldehyde Labeling
Exempted Product
Quasinoncombustible
4VOC Standards Compliant
Low VOC
Deodorant
ECO
<WAVE>
<BIAS>
303
606
Ceiling
<STONE>
Humidity Conditioning
Building Material
Japan Construction Material &
Housing Equipment Industries Federation
■ Premium Features
Humidity Conditioning Formaldehyde Absorption
<FLAT>
9mm Thick
MD F
WT207
ＷT2073-1
ＷT2074-1
ＷT2071-2
ＷT2072-2
ＷT2073-2
ＷT2074-2
ＷT2071-3
ＷT2072-3
ＷT2073-3
ＷT2074-3
ＷT2071-4
ＷT2072-4
ＷT2073-4
ＷT2074-4
ＷT2071-5
ＷT2072-5
ＷT2073-5
ＷT2074-5
I nteri or Door
ＷT2072-1
F l o o ri ng
ＷT2071-1
Speci fications
9 mm thick, 303 x 606 mm
Cardboard case, 8 pieces (1.46㎡) per case
Humidity conditioning rock wool board
Emboss processing + Acrylic emulsion coating
Tongue-and-groove joint on all sides, chamfering
■Cross-sectional View
(Short side)
9
303
Quasi-noncombustible material certified by the Minister of Land, Infrastructure, Transport and Tourism, QM-9817
Humidity conditioning building material, registered product name "DRYART
(humidity conditioning rock wool board, 9 mm)" Registration number: T09-0020
(Long side)
Formaldehyde regulations ▷ Labeling exempted product
Underlayment System Tape Adhesive Backed Tongue & Groove Joint
Surface coated with
special coating to
prevent 99% of viruses
grow on the wall.
6mm Thick
■ Labels Related to Public Certifications and Industrial Associations
Formaldehyde Labeling
Exempted Product
4VOC Standards Compliant Noncombustible
Low VOC
Humidity Conditioning
Building Material
Japan Construction Material &
Housing Equipment Industries Federation
■ Premium Features
Deodorant
Humidity Conditioning Formaldehyde Absorption
ECO
B u il d i n g A co us ti c s
303
606
<STRIPE> WT2051-1
W a ll
Residential use
606
9
Registration agency: Japan Construction Material & Housing Equipment Industries Federation
WT205
Cabinet
Dimensions
▷
Packing material, quantity ▷
Base material ▷
▷
Surface
Edge processing ▷
Certifications ▷
<ROCK>WT2052-1
<FLAT> WT2053-1
Speci fications
Ot h er s
■Cross-sectional View
6 mm thick, 303 x 606 mm
Cardboard case, 8 pieces (1.46㎡) per case
(Short side)
303
Humidity conditioning DAILITE board
Emboss processing + Acrylic emulsion coating
Tongue-and-groove joint on all sides, rounded joint
6
Dimensions
▷
Packing material, quantity ▷
Base material ▷
▷
Surface
Edge processing ▷
Certifications ▷
Noncombustible material certified by the Minister of Land, Infrastructure,
Transport and Tourism, NM-1515 Humidity conditioning building material, registered product name
(Long side)
Registration agency: Japan Construction Material & Housing Equipment Industries Federation
Formaldehyde regulations ▷ Labeling exempted product
606
6
"DRYART (humidity conditioning DAILITE board)" Registration number: T08-0001
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
44
Decorative Wall Board
Made in Japan
MD F
WF8/WF6
Commercial &
Residential use
Wide lineup of printed paper decorative finish and moisture resistant
decorative finish wall products are recommended for commercial,
residential, public area and etc.
(Subject to local government regulation on interior finish requirement)
Underlayment System Noncombustible
6mm Thick
■ Labels Related to Public Certifications
and Industrial Associations
Formaldehyde Labeling
Exempted Product
4VOC
Standards Compliant
■ Premium Features
Low VOC
Ceiling
Splash
Resistant
(Moisture-proof
Decorative Finish)
Antimicrobial
ECO
(Moisture-proof
Decorative Finish)
■Surface Material
Sheet Decoration
Decorative
Paper
(Printed Paper Decorative Finish)
Sheet Decoration PET Film
(Moisture-proof Decorative Finish)
F l o o ri ng
600
WF8PML-94
WF8PMA-94
WF8PMT-94
WF8PMW-94
910
WF6SMW-42
W a ll
Specifications (Printed decorative paper finish)
Specifications (moisture resistant Decorative Finish)
Dimensions, quantity ▷ 16 mm thick, 600 x 2,430 mm (2 x 8 ft)
4 pieces (5.83 m2, approx. 30 kg) per case
Packing material
▷ Shrink film packaging
Base material
▷ DAILITE
Surface decoration ▷ Decorative Paper
Edge processing
▷ Edge curling and end slight chamfering on long sides, cutting-off on short sides
Certifications
▷ Noncombustible material certified by the Minister of Land, Infrastructure, Transport and Tourism, NM-1333
Formaldehyde regulations ▷ Labeling exempted product
1.5
6
910
■ Cross-sectional View
(Moisture-proof Decorative Finish)
1.5
1.5
＊Curing decorative finish only on long sides
＊Curing decorative finish only on long sides
Custom Order Specifications
Ot h er s
Printed paper decorative finish: 600 x 2,430 mm
Moisture-proof decorative finish: 910 x 2,580 mm
Thickness
Not customizable
Not customizable
Width
300 to 600 mm
300 to 910 mm
Height
2,730 mm max.
2,730 mm max.
Standard dimensions
Custom
dimensions
B u il d i n g A co us ti c s
600
■ Cross-sectional View
(Printed Paper Decorative Finish)
Dimensions, quantity ▷ 6 mm thick, 910 x 2,580 mm (3 x 8.5 ft)
2 pieces (4.69 m2, 25 kg) per case
Packing material
▷ Cardboard case
Base material
▷ DAILITE
Surface decoration ▷ Decorative PET film
Edge processing
▷ Edge curling and end slight chamfering on long sides, cutting-off on short sides
Certifications
▷ Noncombustible material certified by the Minister of Land, Infrastructure, Transport and Tourism, NM-1386
Formaldehyde regulations ▷ Labeling exempted product
1.5
WF6SML-42
6
WF6SWH-42
Direction of wood grain
WF6 Moisture-proof Decorative Finish
2,580
Cabinet
WF8PWH-94
Direction of wood grain
WF8 Printed Paper Decorative Finish
2,430
I nteri or Door
DAIKEN's construction materials can
be easily cut using a hand saw,
contributing to improving workability
in construction sites.
End curling
Only long sides customizable (with slight chamfering)
Perforation
Material can be perforated.
(Available perforation diameter and pitch: 5/6/8/10 mm in 15/20/25/30/40/50-mm pitch)
＊Note that, once perforated, the product is no longer regarded as a noncombustible material.
End/joint sheet
availability
45
End/joint sheet can be shipped.
20-mm wide sheet (Shipping unit: Length [m])
＊On-site pasting needed.
End/joint sheet can be shipped.
20-mm wide sheet (Shipping unit: Length [m])
＊On-site pasting needed.
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
Residential &
Commercial Use Underlayment System
Noncombustible
3mm Thick
MD F
WF7
■ Labels Related to Public Certifications
and Industrial Associations
Wall material recommended for residential elderly care facilities, welfare facilities, etc.
(subject to local government regulation and acceptance criteria on non-combustible
materials requirement )
Formaldehyde Labeling
Exempted Product
4VOC
Standards Compliant
■ Premium Features
Low VOC
ECO
■ Surface Material
Sheet Decoration
Ceiling
Decorative
Paper
F l o o ri ng
I nteri or Door
Cabinet
W a ll
Printed Paper Decorative Finish
WF7RMA-54
WF7RMT-54
WF7RMW-54
Specifications (Printed Decorative Paper Finish)
3 mm thick, 459 (Effective decoration length: 455) x 2,580 mm, 4 pieces (4.69 m2, approx. 21 kg) per case
Cardboard case
DAILITE
Decorative Paper
Halving lap joint on long sides, cutting-off on short sides
Noncombustible material certified by the Minister of Land, Infrastructure, Transport and Tourism, NM-1203
Labeling exempted product
■ Cross-sectional View (Printed Paper Decorative Finish)
455
(Effective decoration length)
459
34
3
▷
▷
▷
▷
▷
▷
▷
Ot h er s
Dimensions, quantity
Packing material
Base material
Surface
Edge processing
Certifications
Formaldehyde regulations
4
7
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
B u il d i n g A co us ti c s
Direction of wood grain
WF7RML-54
2,580
WF7RWH-54
455
(Effective decoration length)
46
Acoustic Solutions
Made in Japan
MD F
Ceiling
Daiken Acoustic Materials
make your home theater and
music studio sound great!
F l o o ri ng
I nteri or Door
Sound Absorption Materials
Sound absorption is the ability of a material to absorb sound waves to suppress sound reflection.
In ordinary rooms, sound waves are reflected by the ceiling, wall, floor, and other equipment one after the other, so it is difficult to obtain desirable sound.
By using ceiling and wall materials with high sound absorption characteristics, it is possible to suppress sound reflection to obtain an optimal sound environment.
Cabinet
Sound Absorption Ceiling Board Sound Absorption Wall Panels
W a ll
B u il d i n g A co us ti c s
TB0210
TB0212
WB0703-MD
Oth er s
TB0213
TB0110
TB01018
TB01063
TB0210-1
TB0213-1
WB0156
47
WB0151
WB0702-MW
WB0155
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
MD F
Sound Insulation Materials
Sound insulation is the ability of a material to prevent sound waves from passing in and out of a room.
For rooms such as a home theater or piano room subject to loud sound at 100 dB or higher, some sound isolation measures should be taken.
By using DAIKEN's sound isolation materials to isolate the entire room, it is possible to reduce sound leaking out of the room to approximately 1/2 to 1/4, compared to rooms using ordinary wall materials.
Underlay Sound Insulation Materials Construction Insulation and accessories
Ceiling
Sound-proof Door
F l o o ri ng
GB1801-4
I nteri or Door
GB0104
Cabinet
GB0903
GB01011-S
W a ll
GB03053E
B u il d i n g A co us ti c s
Color Variation
ML
MA
MT
MW
MK
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
Oth er s
WH
48
Underlayment, Base Material, etc.
Made in Japan
MD F
Wall Base underlayment Volcanic Vitreous Double Glaze Board
DAIKEN developed a unique engineered panel by effectively utilizing volcanic products called "Shirasu."
This panel is applicable to various exterior wall underlayment needs due to excellence in decay/termite prevention, dimensional stability
and moisture permeability, lightweight but high strength equivalent to structural plywood (special grade in JAS), fire resistance, and so on.
Two types of products are available, 12 mm thick or 9 mm thick.
Volcanic vitreous material (Shirasu)
Rock wool
Ceiling
■ Volcanic ash, rock wool, etc.
are corrosion proof and hardly combustible materials.
Iron and steel slag
Specifications
F l o o ri ng
Standards
Certifications
Formaldehyde regulations
▷ JIS A 5440 volcanic silicates fiber reinforced multi-layer board (Declaration of conformity based on JIS Q 1000)
▷ Fireproof material certified by the Minister of Land, Infrastructure, Transport and Tourism, QM-9142
▷ Labeling exempted product
Floor base underlayment insulation board
DAIKEN's insulation board is a fiberboard with a density of less than 0.35 g/cm, manufactured by forming the plant fibers of waste wood
etc. produced when buildings are demolished as the raw material.
It is useful for many purposes as an underlayment or curing material for roof, wall, or floor installation.
I nteri or Door
■ Covering the floor with this curing board after installation securely protects the floor
against falling objects and effectively prevents sand scratches and other damage.
■ Water-repellent finish prevents the floor surface from wetting and dirt even if the rain
blows in.
■ Slip-proof surface finish ensures safety in building site.
Cabinet
Specifications (Common for Eastern/Western Japan)
Custom dimensions
Packing material, quantity
Package weight
Base material
Surface
Back surface
▷
▷
▷
▷
▷
▷
6 mm thick, 910 x 1,820 mm
150 pieces per case, fastened with Polypropylene bands
Approx. 450 kg/package
Insulation board
Breathable water-repellent coating
Formaldehyde absorption treatment
▷ ・Designated procurement item in accordance with the Green Purchasing Law
(Law Concerning the Promotion of Procurement of Eco-Friendly Goods and Services by the State and Other Entities)
・Recycling Mark certified product (approved by Japan Fiberboard and Particleboard Manufacturers Association),
JFP-M009
・Eco Mark certified product No. 05111013
Formaldehyde regulations ▷ Labeling exempted product
Certifications
W a ll
Non Combustible Decoration Base Material
Excellent fire resistance, strength, and lightweight suitable for various types of Non Combustible Decorative base board.
B u il d i n g A co us ti c s
■ Noncombustible Material with Excellent Fire Resistance
Noncombustible decorative base material ideal for decorative base board products that require high fire resistance
■ Lightweight and High Strength
Lightweight and high-rigidity noncombustible material with a density of 0.77 g/cm3 <FAL>, highly suitable as a surface material for various types of decorative board products
■ Excellent Dimensional Stability
Superb dimensional stability equivalent to calcium silicate boards
■ Exceptional Decorative Surface Quality
Exceptionally smooth surface that significantly improves the quality of decorative surface on coating finished and moisture-permeable sheet finished products
＊Please use solvent-free adhesives such as a PUR (polyurethane reactive) hot-melt adhesive).
■ Easy of Cutting
Base material that can be cut easily using a wood chip saw or even a hand saw
■ No Preservation Treatment Needed to Prevent Termite/insect Damage and Decay
Base material using an inorganic material that is hardly eaten by termites and wood-destroying fungi. This is a human-friendly product that eliminates the need for termite, insects, and decay prevention.
■ Eco-friendly and Human-friendly
Asbestos-free inorganic base material featuring a low environmental load. DAILITE is a formaldehyde labeling exempted product friendly to the earth and human beings.
FTL
FAL
Specifications
Oth er s
Application Examples
Material composition
Noncombustibility
Density (g/cm3)
Bending strength (N/mm2)
Peel strength (N/mm2)
Standard dimensions
Packing material, quantity
Custom order dimensions
Custom order production lot
49
▷
▷
▷
▷
▷
▷
▷
▷
▷
▷
Various types of decorative base boards, kitchen hanging door, noncombustible molding, store/hall interior material, wall material for museum repository, flat roof underlayment, etc.
Thin-paper aluminum-foil laminated on both sides/no volcanic silicates fiber reinforced multi-layer board on back surface (not reversible)
Noncombustible material certified by the Minister of Land, Infrastructure, Transport and Tourism, NM-1221 (DAILITE FAL) Noncombustible material certified by the Minister of Land, Infrastructure, Transport and Tourism, NM-1220 (DAILITE FTL)
0.77 (DAILITE FAL) 1.3 (DAILITE FTL)
12 (DAILITE FAL) 16 (DAILITE FTL)
0.6
6.9 mm thick, 925 x 1,840 mm (DAILITE FAL) 3 mm thick, 925 x 1,840 mm (DAILITE FTL)
6 mm thick: 100 pieces, 9 mm thick: 70 pieces (DAILITE FAL) 100 pieces (DAILITE FTL)
6.9 mm thick, 610 to 1,225 x 1,000 to 3,030 mm (DAILITE FAL) 3 mm thick, 610 to 1,225 x 1,000 to 3,030 mm (DAILITE FTL)
3,000 m2 min.
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
INDEX
DAIKEN developed a unique engineered panel by effectively utilizing volcanic products called "Shirasu."
This panel is applicable to various exterior wall underlayment needs due to excellence in decay/termite prevention, dimensional stability
and moisture permeability, lightweight but high strength equivalent to structural plywood (special grade in JAS), fire resistance, and so on.
Two types of products are available, 12 mm thick or 9 mm thick.
Volcanic vitreous material (Shirasu)
Rock wool
Global Business Expansion Centered in Asia
The DAIKEN Group is globally expanding the businesses in Asia. Our three overseas offices located in China
Grass Buster thick layer fabric able to block 99%
the sunlight
to prevent
Malaysia. Total approximately 3,200 employees work in Daiken offices and of
factories
worldwide, including
Japan.weeds grown in paddy or mulch.
(Shanghai), Singapore, and Indonesia. In additional four production plants located in China, New Zealand, and
Everyone has a home filled with the laughter of family.
Iron and steel slag
Specifications
After
Installation
Sunlight encourages the
rapid growth of weeds.
▷ Fireproof material certified by the Minister of Land, Infrastructure, Transport and Tourism, QM-9142
Meanwhile we are also introduce the beauty of mother nature resources - Japanese wood made
products to the consumer.
Floorisbase
insulation
DAIKEN
workingunderlayment
in cooperation with local
governments board
and companies based on
its long-cultivated technology.
View of Customers' Lives
Establishing an Eco-friendly and
Human-friendly Manufacturing System
Fully Support for Construction of
Comfortable Living Spaces Color yarn layer
Interior finishing
150
82
Changing to
Construction
Test method: JIS L 1096A,
45-degree cantileverecological
method
products
＊The above test results are based on manufacturer measurement
and not guaranteed values.
0
min.
min.
The sheet is verified to be durable for
Horizontal
68
(Weed-proof sheet)
Photo showing the sheet installation site
(approx. 10 years
after installation)
Technical
guidance
above data is based on test results provided by the
Sapporo, Sendai, Tokyo, Kanazawa, Nagoya, Osaka,
Hiroshima, Takamatsu, Fukuoka 【Overseas Offices】
Shanghai, Singapore, Indonesia
→
＊The
manufacturer and not guaranteed.
Wall
42
【Overseas Production Plants】
Inami Plant (Nanto, Toyama)
DAIKEN industries (Ningbo) Corporation
Okayama Plant (Okayama, Okayama)
(China)
Samples
Takahagi Plant Color
(Takahagi,
Ibaraki)
DAIKEN NEW ZEALAND LIMITED
Mie Plant (Tsu, Mie)
Green (New Zealand)
White
Daifit Co., Ltd. (Kurayoshi, Tottori)
DAIKEN SARAWAK SDN.BHD.
Dai-wood Corporation (Iga, Mie)
(Malaysia)
Setouchi Kakoh Co., Ltd. (Okayama, Okayama)
DAIKEN MIRI SDN.BHD.
Toyama Juki Co., Ltd. (Tonami,
Toyama)
(Malaysia)
Black
Black
Dai-tac Corporation (Okayama, Okayama)
The
front surface is white or green and the back surface is black.
Aizu Daiken Kako
K.K.
Building Acoustics
47
Others
49
The sheet is reversible and either side can be used as the front surface.
http://www.daiken-ad.com/
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
50
Ot he r s
【Showrooms】
41
Weed-proof sheet
(Commercial product)
【Domestic Production Plants】
・Registered Head Office: 1-1 Inami, Nanto City, Toyama, Japan
・Operational Headquarters: 1-6-20 Dojima, Kita-ku, Osaka, Japan
・Tokyo Office: 3-12-8 Sotokanda, Chiyoda-ku, Tokyo, Japan
Cabinet
site in Fukui City, Fukui Prefecture.
Soft
【Headquarters and Offices】
For details, refer to our website.
Horizontal
33
Consultation on design and construction
Vertical
50
Vertical
27
Durability
150 150
approximately
years at the
installation
Hardpurchase,
Production,
and sale 10
of building
components
Changing to
ecological
materials
100
15
B ui l d i ng A c ou sti cs
＊ The performance values and the certification labels are based on the Japanese test method and standards.
＊ DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
11
Light-shielding layers
using special
carbon-based yarns
W al l
▷ Various types of decorative base boards, kitchen hanging door, noncombustible molding, store/hall interior material, wall material for museum repository, flat roof underlayment, etc.
▷ Thin-paper aluminum-foil laminated on both sides/no volcanic silicates fiber reinforced multi-layer board on
back surface (not reversible)
5,669
3,194 Transport and Tourism,
5,025
3,191
▷DAIKEN
Noncombustible
material certified by the Minister of Land, Infrastructure, Transport 180,392
and Tourism, NM-1221 (DAILITE FAL) Noncombustible material
certified by4,648
the Minister of Land, Infrastructure,
NM-1220 (DAILITE FTL)
3,141
CORPORATION
168,833
▷ 0.77 (DAILITE FAL) 1.3 (DAILITE FTL)
158,153
▷ 12 (DAILITE FAL) 16 (DAILITE FTL)
26, 1945
▷September
0.6
▷ 6.9 mm thick, 925 x 1,840 mm (DAILITE FAL) 3 mm thick, 925 x 1,840 mm (DAILITE FTL)
▷13,150,039,080
6 mm thick: 100 pieces,
100 pieces2013 (DAILITE FTL)
2012 2014
2012 2013 2014
2012 2013 2014
yen 9 mm thick: 70 pieces (DAILITE FAL)
▷ 6.9 mm thick, 610 to 1,225 x 1,000 to 3,030 mm (DAILITE FAL) 3 mm thick, 610
to 1,225
x 1,000 to 3,030 mm (DAILITE FTL)(Fiscal year)
(Fiscal
year)
(Fiscal year)
2
▷ 3,000 m min.
＊As of March 2015
MDF
Cabinet
■Employees (consolidated)
Unit: Persons
Accounting month: March
1
Flexibility
Material
procurement
Bending resistance (mm)
■Ordinary
income (consolidated)
Unit: Million yen
Vertical density: Approx. 4,000 fabrics/cm
Horizontal density: Approx. 2,000 fabrics/cm
As a leading resource recycling
We have a total support system
company, DAIKEN is working
that helps builders construct living
a c t i v e l y t o d e v e l o p a n dLight Shielding
spaces, ranging from finishing of
PermeabilityCeiling
manufacture ecological
f a c i l i t i e s , o f fi c e s , e t c . a n d
100
High
light-shielding
permeability
of the sheet prevents not
materials
aiming atperformance
"effective of the
production,
purchase, High
and sale
of
Allows less
99.99
sheet
through
the use
of extremely high
utilization
of wood
resources"
b u i l d i light
n g tocpass
o m p o nonly
e n twater
s t ofrom being pooled on the sheet
％
and "effective
utilization
of
c o n s u l t a t i o n o n d esurface,
s i g n a nbut
d also the soil under the sheet
density
woven fabrics
suppresses
the
85.3c o n s t r u c t i o n . W efrom
untapped resources."
d e being
l i v e rdried.
photosynthesis
of weedsWeto have
prevent their
Flooring
％ comfortable living spaces by
75
achieved both eco-friendliness
growth.
and living comfort of by
utilizing a wide variety of building
Back side of the sheet
incorporating thermal insulation,
components and our professional
after 10 years of use.
Because
the sheet allows
sound
absorption,
know-how and technology to get
Test
method:
JIS L 1055A humidity
water to permeate, the appearance
Allows more
Bearing 50
surface materials
JR Kyoto Station ＊Photo showing an
＊The
c o nabove
d i t i test
o nresults
i n g , aree abased
r t hon
q uthird-party
a k e measurement
the most light
outtoofpass
them.
example of installation. of the soil remains almost the same
and not guaranteed values.
(Weed-proof sheet) Weed-proof sheet
Interior Door
as before installation.
resistance, and other features
(Commercial product)
into our product.
High flexibility of the sheet
allows flexible
●Residual wood pieces/
waste
installation depending on
thewood
condition of
●Planted trees etc.
the soil, onDemolition
a slope for example.
07
High-density Fabric Structure
Light-shielding rate (%)
Application Examples
Material composition
Noncombustibility
Business
name:
Density (g/cm3)
Bending strength (N/mm2)
Date
founding:
Peelof
strength
(N/mm2)
Standard dimensions
Packing material,
quantity
Paid-in
capital:
Custom order dimensions
Custom order production lot
■Sales (consolidated)
Unit: Million yen
Application Examples
High-density Three-layer Structure
Engineering Business
51％
Rainwater
Weed-proof sheet
Eco-Business
FY 2014
■ Noncombustible
Material with
ExcellentBusiness
Fire Resistance
Housing
areas - housing, ecology,
Consolidated
Sales base material ideal for decorative base board products that require high fire resistance
Noncombustible
decorative
Percentage of Sales
Eco-Business
■ Lightweight
and High Strength
168,833
and engineering - under
Percentage of Sales
million
yen
Lightweight
and high-rigidity
noncombustible material with a density of 0.77 g/cm3 <FAL>, highly suitable as a surface material for various types of decorative board products
the management philosophy.
85,753million yen
■ Excellent Dimensional Stability
Superb dimensional stability equivalent to calcium silicate boards
55,699million yen
■ Exceptional Decorative Surface Quality
FTL
＊The Percentage of Sales is based on the
Exceptionally smooth surface that significantly improves the quality of decorative surface on coating finished and moisture-permeable sheet finished products
FY2014 Consolidated Sales, 6% of
＊Please use solvent-free adhesives such as a PUR (polyurethane reactive) hot-melt adhesive).
which is occupied by other business segments.
■ Easy of Cutting
Base material that can be cut easily using a wood chip saw or even a hand saw
FAL
■ No Preservation Treatment Needed to Prevent Termite/insect Damage and Decay
Base material using an inorganic material that is hardly eaten by termites and wood-destroying fungi. This is a human-friendly product that eliminates the need for termite, insects, and decay prevention.
■ Eco-friendly and Human-friendly
Asbestos-free inorganic base material featuring a low environmental load. DAILITE is a formaldehyde labeling exempted product friendly to the earth and human beings.
Specifications
Reason
16,486million yen
33％
Weeds
Housing Business
Non Combustible Decoration Base Material
"new lifestyle values" in
10％
Excellent fire resistance, strength, and lightweight suitable for various types of Non Combustible Decorative base board.
(as of July 2015)
Weeds
DAIKEN NEW ZEALAND
Production plant
I nteri or Door
■ Covering the floor with this curing board after installation securely protects the floor
against falling objects and effectively prevents sand scratches and other damage.
■ Water-repellent finish prevents the floor surface from wetting and dirt even if the rain
blows in.
Additional
Functionality
and Quality in
■ Slip-proof
surface finish ensures
safety in building site.
Ranging from flooring, wall,
ceiling, and underlayment
materials to cabinets and
S
p
e
c
i
f
i
c
a
t
i
o
n
s
(
C
o
m
m
o
n
f
o
r
E
a
s
t
e
r
n
/
W
e
s
t
e
r
n
J
a
p
a
n
)
Since the establishment of DAIKEN in 1945, the DAIKEN Group has offered
construction acoustic products,
Comfortability
Security
▷ 6and
Certifications
Custom
dimensions
▷ the
mm thick,
910 x 1,820
mmadapt to the changes
・Designated procurement
item in accordance
the Green Purchasing Law
we manufacture
a widewith
variety
various
products
services
that
in society and
Packing material, quantity ▷ 150 pieces per case, fastened with Polypropylene bands
(Law Concerning of
thehousing
Promotion of
Procurementthat
of Eco-Friendly
Goods and Services by the State and Other Entities)
materials
are
d i ve rweight
s i fi e d n▷e eApprox.
d s o450
f cu
s t o m e r s t o t h e m a n a g e m e n t p h i l o s o p・
h Recycling
y
Package
kg/package
Mark certified product (approved by Japan Fiberboard and Particleboard
Manufacturers Association),
DA IKEN
indispensable for housing
▷ Insulation board
Base material
JFP-M009
Group' s
c
o
n
s
t
r
u
c
t
i
o
n
.
L
o
o
k
i
n
g
a
t
Customer-focused
management
goes
beyond
service
and
quality
to
create
Housing
▷ Breathable water-repellent coating
Surface
・Eco Mark certified product No. 05111013
Materials
Safety
e o p l e ' s l i v e s f r o m t h e Health
▷ Formaldehyde absorption treatment
Back surface
Formaldehyde regulations ▷ Labeling exemptedpproduct
harmon y between
The
viewpoints of safety, security,
People, The Living and The
comfortability, convenience, and
Percentage of Sales by Business
Convenience
health, as well as
Environment.
e
c
o
f
r
i
e
n
d
l
i
n
e
s
s
,
w
e
o
f
f
e
r
Engineering Business
We will continue to create
products aiming to improve the
Percentage of Sales
comfort of living for everyone.
Company Profile
Office
DAIKEN's insulation board is a fiberboard with a density of less than 0.35 g/cm, manufactured by forming the plant fibers of waste wood
etc. produced when buildings are demolished as the raw material.
It is useful for many purposes as an underlayment or curing material for roof, wall, or floor installation.
Customer-focused management goes
beyond service and quality to create
harmony between The People, The Living
and The Environment.
our three core business
DAIKEN SARAWAK
F l o o ri ng
Our
mission
is Labeling
to deliver
an Eco Friendly and Healthy Lifestyle by fully utilizing the natural resources.
Formaldehyde
regulations ▷
exempted product
05
DAIKEN's
HighMaterials"
permeability allows
"Ecological
rainwater to permeate
Sunlight is blocked to
through the sheet.
and
"High-function
suppress the growth
of weeds.
Building Materials"
That Play an Active
Role in Various Areas
Before
DAIKEN MIRI
Installation
DAIKEN industries (Ningbo) Corporation
weStandards
believed the
home needs to be secure, safe and comfortable for every member in the family.
▷ JIS A 5440 volcanic silicates fiber reinforced multi-layer board (Declaration of conformity based on JIS Q 1000)
Certifications
03
DAIKEN
History
This fabric weed-proof sheet uses a high-density three-layer structure
that cuts
99.9% or more of
sunlight to exhibit high light-shielding performance, suppressing the breeding and growth of weeds to
reduce the cumbersome maintenance workload such as weeding.
■ Volcanic ash, rock wool, etc.
are corrosion proof and hardly combustible materials.
An accident or injury can occur in any part of your home. We Daiken care about your daily life,
01
Business Outline
Ceiling
Creating "New Lifestyle And Values"
in Three Main Core Business Areas Housing, Ecology, and Engineering
Grass Buster Weed Control Fabric
MD F
Wall Base underlayment Volcanic Vitreous Double Glaze Board
2015-16
DAIKEN Global Brochure
DAIKEN Global Brochure
DAIKEN CORPORATION
•Overseas Business Department
Sumitomo Fudosan Akihabara Bldg., 12-8, Sotokanda, 3-chome Chiyoda-ku, Tokyo, 101-8950 JAPAN
Tel : 03-6271-7680 / Fax : 03-5296-4048
•Singapore Branch
100 Beach Road, #13-01/02 Shaw Tower,
SINGAPORE 189702
Tel : 010-65-62971933 / Fax : 010-65-62971363
•Indonesia Representative Office
Ruko Bangunan Blok F7/1-2 Jl. Mangga Dua Raya,
Jakarta Pusat 10730-Indonesia
Tel : 010-62-21-600-3751/3752 / Fax : 010-62-21-600-3750
•DAIKEN (SHANGHAI) CORPORATION
Room 2302, Ruijin Building, 205 Maoming Road(S), Shanghai 200020, CHINA
Tel : 010-86-21-6473-1201 / Fax : 010-86-21-6473-0463
Headquarters Dojima Avanza 22F, 1-6-20 Dojima, Kita-ku, Osaka 530-8210, Japan
DAIKEN CORPORATION 2016.03
The copyright of this publication belongs to DAIKEN CORPORATION.
Any unauthorized duplication or reproduction of the contents herein is prohibited.
■ The specifications and other contents of this catalog are subject to change without prior notice.
■ The color or texture of the actual products may slightly differ from the photographs provided herein
■ DAIKEN CORPORATION does not provide repair services and technical support overseas.
［680-01］
MK2016.03 N・SI/SI
（P1.1-01）