Water Filtration Systems – TTCS

R A N G E
C O R P .
REVIEW THESE IMPORTANT POINTS BEFORE INSTALLING YOUR SC SERIES
Water Filtration Systems – TTCS-35 & TTBS-610
9. Prior to connecting the SC Series System outlet to the steamer/
combi-oven, run water through the unit and water lines to purge
them of air and any particles or debris.
SYSTEM
1 Always use a minimum 1/2" O.D. tubing, or equivalent, from the outlet
of the filtration unit to your steamer/combi-oven.
10. Connect the inlet hose/piping of the steamer/combi-oven to the
2. Use the water from the SC Series unit only on steamer/combi-oven
11. Follow the manufacturer’s instructions for starting and
feed and make-up water. DO NOT USE TO TREAT CONDENSATE
COOLING WATER.
outlet fitting on the SC Series System.
operating your steamer/combi-oven.
3. For many years, Everpure has worked closely with all major
foodservice equipment manufacturers to assure the highest
possible degree of compatibility and optimal performance of its
water filtration systems with their ovens and steamers. To help
ensure satisfactory operation, we recommend that you
obtain and read the equipment manufacturer’s operating and
maintenance instructions for your specific model. Follow the
manufacturer’s instructions and procedures for installation,
maintenance and cleaning. Or consult with the manufacturer’s
representative or technical service personnel for guidance
regarding any differences between their directions and those
included with this system. Failure to do so may affect equipment
performance and/or manufacturer’s warranty coverage.
INSTALLATION (SEE FIGURE 1 & FIGURE 2)
Before beginning installation, inspect the contents of the filtration
system carton to verify that the following items are present:
• Bracket-mounted system including two filter housing heads
Figure 1 - TTSC-1011
System
and filter bowls (two clear for Model SC-1011; one white and
one clear for Model SC-1021)
• CG5-10 10” (SC-1011) or CG5-20 20” (SC-1021) sediment/
chlorine pre-filter cartridge
• SS-10 Scale-Stick scale control cartridge
• Sump wrench
1. Shut off power to the oven.
2. Shut off the inlet water to the oven at the supply valve.
3. Attach the SC series system to a suitable structure in an
accessible location. Mounting holes are provided on the
system back-plate.
THE SC-1011 SYSTEM WEIGHS 12 POUNDS IN
SERVICE. THE SC-1021 SYSTEM WEIGHS 15
POUNDS IN SERVICE.
4. Attach the inlet water supply line to the inlet fitting on the SC
Series system.
5. Remove the clear bowl from the pre-filter housing by unthreading
it from its head. A sump wrench is provided to assist in loosening a
tight bowl. Remove the wrapping from the CG5 carbon pre-filter
cartridge and insert the cartridge into the bowl aligning the hole in the
bottom of the cartridge over the raised stub in the bottom of the bowl.
6. Check to see that the O-ring is in place at the top of the bowl
and that it is lubricated with food grade silicone lubricant.
Reinstall the bowl by aligning the hole in the top of the cartridge
with the stub extending down from the housing head and
threading the bowl onto the head. Hand tighten snugly. Do not
over-tighten the bowl.
7. Remove the clear bowl from the sc ale control housing
by unthreading it from its head. Remove the wrapping from the
Scale Stick cartridge and insert the cartridge up onto the stub
extending down from the housing head. The friction fit between the
Scale Stick and the stub should allow the cartridge to remain
suspended while reinstalling the clear bowl.
8. Check to see that the O-ring is in place at the top of the bowl
and that it is lubricated with food grade silicone lubricant.
Reinstall the bowl by threading it onto its housing head. Hand
tighten snugly. Do not over-tighten the bowl.
Figure 2 - TTSC-1021 System
CARTRIDGE CHANGE DETERMINATION
Replace the carbon pre-filter cartridge whenever its capacity is
reached or when it becomes excessively dirty (observed visually or by
flow restriction).
The system outlet pressure gauge provides a quick, simple means of
determining when the filter cartridge should be checked. The gauge can
be used to monitor dynamic (flowing) pressure and static (line)
pressure. The filter cartridge should be changed when the gauge
needle is in the red area while the oven is in operation.
The SS-10 Scale Stick cartridge should be changed when the product
level in the cartridge drops below 1/2” from the bottom of the bowl.
CARTRIDGE CHANGE INSTRUCTIONS
1. Shut off power to the steamer/combi-oven.
2. Shut off filter system inlet water supply and outlet hose to the
steamer/combi-oven.
3. Momentarily depress the red pressure relief valve button on top of the
scale control cartridge head.
4. Disconnect the outlet hose from the filter system.
5. Unthread and remove the clear pre-filter bowl and dump any water
from the bowl. A sump wrench is provided to assist in loosening a tight
bowl. Remove and discard the old carbon pre-filter cartridge.
6. Rinse and clean the bowl with clean water. No special cleaners
are needed.
7. Check and clean the bowl O-ring. If it is dry, lubricate it with a food
grade silicone lubricant. If it is cracked or deteriorated, replace it.
CARTRIDGE CHANGE INSTRUCTIONS (CONTINUED)
8. Remove the wrapping from the CG5 carbon pre-filter cartridge and insert
the cartridge into the bowl aligning the hole in the bottom of the
cartridge over the raised stub in the bottom of the bowl.
9. Check to see that the O-ring is in place at the top of the bowl and that it
is lubricated with food grade silicone lubricant. Reinstall the bowl by
aligning the hole in the top of the cartridge with the stub
extending down from the housing head and threading the bowlto the
head. Hand tighten snugly. Do not over-tighten the bowl.
10. Remove the clear bowl from the sc ale control housing by
unthreading it from its head and dumping any water from the bowl.
Remove the wrapping from the Scale Stick cartridge and insert the
cartridge up onto the stub extending down from the housing head. The
friction fit between the Scale Stick and the stub should allow the
cartridge to remain suspended while reinstalling the clear bowl.
DIMENSIONS AND SPECIFICATIONS (SEE FIGURE 3)
Models:
TTSC-1011
Mounting plate width:
9.25"
DESCRIPTION
PART NUMBER
TTCG510 10” Carbon Pre-filter
cartridge
TTCG520 20” Carbon Pre-filter
DEV9108-15 (12-pack)
cartridge
SS-10 Scale Stick cartridge
9.75"
9.75"
16"
25.75"
System depth:
5.25"
5.25"
Shipping weight:
8.5 lbs.
10 lbs.
Operating weight:
12 lbs.
15 lbs.
Clear 10” bowl
EV3092-58
White (opaque) 20” bowl
EV3093-32
O-ring for bowls
EV3112-40
Sump wrench
EV8000-75
Everpure SC Series Water Filtration System for Steamer Applications
SYSTEM CHARACTERISTICS
• Twin series header configuration
• Drop-in style filter bowl housings
• Filter header
bly installed
syst ass
onto formed stainless steel wallmounting back-plate
• 5- on crabon bloc k cra
tridgerof
mi
particulate and chlorine reduction
1/2" FNPT
Temperature: 35-100˚ F (2-38˚ C)
Pressure:
Water flow:
10-125 psi (0.7-8.6 bar), non-shock
6 gpm maximum
FOR COLD WATER USE ONLY
Customer Service (570) 455-3000 - Fax (570)
455-9491 - www.therma-tek.com
EV9799-02 (12-pack)
EV3114-09
9.25"
Overall width:
DEV9108-25 (6-pack)
Outlet pressure gauge
TTSC-1021
Overall height:
Inlet/outlet connections:
REPLACEMENT PARTS
Use only genuine Everpure replacement cartridges. Contact your local
Everpure dealer for filter cartridges or system replacement parts.
Pre-filter
Housing with
carbon block
pre-filter
Scale Control
Housing with
SS-10 Scale
Stick
• SS-10 Sc aleStic k
ca
rtridgerosf cale control
• Outlet ss gauge -assembled
p u
p
onto header assembly
LIMITED WARRANTY
Commercial Water Treatment Equipment
You have just purchased one of the finest water treatment units made. As an expression of our confidence in Everpure products, this product is warranted against defects in
material and workmanship to the original end-user when installed in accordance with Everpure specifications. The warranty period commences from the date of purchase
and is administered as follows:
For a period of ONE YEAR
Replaceable elements
(i.e., filter & water treatment cartridges)* For a period of FIVE
YEARS
The entire system
(excluding replaceable elements)
*This is for material & workmanship, not filter or water treatment cartridge life.
The unit must be used in operating conditions that conform to Everpure’s recommended design guidelines. This warranty will not apply if the unit has been modified,
repaired or altered by someone not authorized by Everpure.
If a part described above is found defective within the specified period, you should notify Everpure technical service at the phone number listed below. Any part found
defective within the terms of this warranty will be repaired or replaced (at Everpure’s discretion) by your local dealer or Everpure technical service. You pay only freight
from our factory and local dealer charges. Any repaired or replaced warranty item will be incorporated under the original warranty terms of the existing system.
We are not responsible for damage caused by accident, fire, flood, freezing, Act of God, misuse, misapplication, neglect, oxidizing agents (such as chlorine, ozone,
chloramines and other related components), alteration, installation or operation contrary to our printed instructions, or by the use of accessories or components which do
not meet Everpure’s specifications. Refer to the specifications section in the Installation and Operating manual for approved application parameters.
Our product performance specifications are furnished with each water treatment unit. TO THE EXTENT PERMITTED BY LAW, EVERPURE DISCLAIMS ALL IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE; TO THE EXTENT
REQUIRED BY LAW, ANY SUCH IMPLIED WARRANTIES ARE LIMITED IN DURATION TO
THE PERIOD SPECIFIED ABOVE FOR THE ENTIRE WATER TREATMENT UNIT. As a manufacturer, we do not know the characteristics of your water supply or the
purpose for which you are purchasing this product. The quality of water supplies may vary seasonally or over a period of time, and your water usage rate may vary as well.
Water characteristics can also differ considerably if this product is moved to a new location. For these reasons, we assume no liability for the determination of the proper
equipment necessary to meet your requirements, and we do not authorize others to assume such obligations for us. Further, we assume no liability and extend no
warranties, express or implied, for the use of this product with a non-potable water source or a water source which does not meet the conditions for use described in the
owner’s guide or performance data sheet for this product. OUR OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED TO THE REPAIR OR REPLACEMENT (AT
EVERPURE’S DISCRETION) OF THE FAILED PARTS OF THE WATER TREATMENT UNIT, AND WE ASSUME NO LIABILITY WHATSOEVER FOR DIRECT, INDIRECT,
INCIDENTAL, CONSEQUENTIAL, SPECIAL, GENERAL OR OTHER DAMAGES.
Some states do not allow the exclusion of implied warranties or limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Similarly,
some states do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state.
Consult your telephone directory for your local independently operated Everpure dealer, or write Everpure for warranty and service information.
Customer Service (570) 455-3000 - Fax (570) 455-9491 - www.therma-tek.com
Download PDF
Similar pages