CARTS
STANDARD LAB CART
HEAVY-DUTY LAB CART
Stainless steel 3-shelf lab cart holds up to 400 lbs.
Equipped with handle and 4” swivel casters.
Overall dimensions: 16 1/4” W x 27 1/2” L x 32 1/8” H.
Shelves: 15 1/2” x 24” with 11 7/8” clearance between
shelves. Top and middle shelves have guards on
three sides. No guards on bottom shelf.
CL-100
Stainless steel 3-shelf lab cart holds
up to 400 lbs. Same as the CL-100,
except has guards on all four sides of
all shelves.
CL-101
645.00/ea
375.00/ea
CLAMPS
MOHR PINCH CLAMPS
Stainless steel Mohr type pinch clamps for rubber tubing.
DAY PINCH CLAMPS
Maximum Tubing Size
NCL #
Price/ea
/ ” Outside Diameter
C-250
2.95
White-plated, for rubber tubing up
to 3/8” OD.
/ ” Outside Diameter
C-256
3.00
C-251
/ ” Outside Diameter
C-257
2.60
3 8
1 2
5 8
2.40/ea
HOSE CLAMP
HOSE CLAMPS
Screw type hose clamp.
Maximum Tubing Size
NCL #
Price/ea
1 2
C-252
2.70
1” Outside Diameter
C-253
2.90
/ ” Outside Diameter
www.nclabs.com
Order Toll Free
Useful for connecting pressure or
vacuum lines of rubber tubing to glass
or metal tubing. Band-ribbed for
greater strength. Can be tightened
with a screwdriver. For tubing up to
5/8” OD.
CL-199
1.800.648.7836
1.50/ea
CLAMPS
3-PRONG EXTENSION CLAMP WITH BOSS HEAD
Our deluxe line of 3-prong extension clamps are constructed
of pressure die-cast zinc alloy and are chrome-plated. Clamps
open to about 3”, have a recommended maximum grip size of
about 21/4”, and feature double keyed spring-type adjustment
screws. Boss head clamp can swing freely, is lockable at any
angle up to 360°, and can be used with rods up to 19 mm.
Max. use temp: 280°C
C-262
17.25/ea
3-PRONG EXTENSION CLAMP WITH ROD
Our deluxe line of 3-prong extension clamps are constructed
of pressure die-cast zinc alloy and are chrome-plated. Clamps
open to about 3”, have a recommended maximum grip size of
about 21/4”, and feature double keyed spring-type adjustment
screws. Extension rod is 81/4” long, 5/16” OD, with an overall
length of 123/4”. Requires clamp holder on page 287. Max.
use temp: 280°C
C-263
13.50/ea
2-PRONG BURET CLAMP WITH BOSS HEAD
Our deluxe line of two prong burette clamps are made
of pressure die casted zinc alloy and are chrome plated.
Adjustable to hold up to 60 mm OD burets, these clamps
feature a spring-type adjustment key. Boss head clamp can
swing freely and is lockable at any angle up to 360°, and can
be used with rods up to 19 mm. Max. use temp: 280°C
C-264
16.00/ea
2-PRONG BURET CLAMP WITH EXTENSION ROD
Our deluxe line of two prong burette clamps are made
of pressure die casted zinc alloy and are chrome plated.
Adjustable to hold up to 60 mm OD burets, these clamps
feature a spring-type adjustment key. Extension rod is 81/4”
long, 5/16” OD, with an overall length of 123/4”. Requires
clamp holder on page 287. Max. use temp: 280°C
C-265
13.50/ea
Order Toll Free
1.800.648.7836
www.nclabs.com
CLAMPS
EXTENSION CLAMP
CLAMP HOLDER
With plasticized rounded jaws, which
holds objects up to 2 1/4” in diameter.
Overall length 8”. Requires clamp
holder.
C-261
For connecting extension clamp
C-261 and similar clamps to a ring
stand or support stand.
C-260
13.70/ea
SUPPORT RINGS WITH CLAMP ATTACHED
DOUBLE BURET CLAMP
Clamp only.
B-976
9.50/ea
Diameter
NCL #
2”
C-272
9.50
3”
C-273
12.00
4”
C-274
12.40
5”
C-275
13.30
31.50/ea
Price/ea
TUBING CLAMPS
Clamps will not distort, rust, or corrode. Select clamp below for desired tubing size.
Twelve-position ratchet
controls flow from full open
to complete closure. For
tubing up to 3/4” OD.
6 per pack.
Fifteen-position adjustment
controls flow from full open to
complete closure. Fits tubing from
1/8” to 7/16” OD.
12 per pack.
C-352
C-351
18.75/pk
11.05/pk
Single position on/off clamp For
tubing under 3/16” OD. 10 clamps
per pack.
C-350
4.50/pk
THERMOMETER HOLDER
This convenient holder clips onto the edge of a beaker or other vessel
and holds a thermometer vertically near the side of the container for safe,
easy reading. The thermometer is held in place by small “fingers” that
will expand to hold thermometers ranging from 1/8” to 7/16” in diameter.
Made from polypropylene, it withstands temperatures up to 121°C
(250°F). Autoclavable. 3 per pack.
TB-90615.45/pk
TUBING HOLDER
Hold flexible tubing steady in beakers or pitchers with this polycarbonate
clip. Fits securely onto the edge and has a 2” long arm with a hole to accept
tubing up to 3/8” outside diameter. 6 per pack.
TB-80820.35/pk
www.nclabs.com
Order Toll Free
1.800.648.7836
Download PDF
Similar pages