hydrants - Jay R. Smith

HYDRANTS
FIG. 5560QT SER. QUARTERHORSE–1/4 TURN "TWIN TEMP" CHROME PLATED BRONZE
BOX-TYPE HYDRANT W/CONCEALED HOSE CONNECTION FOR HOT & COLD WATER
FUNCTION: Provides positive non-freeze protection where water is required at the outside of the building. Ideal for use in food handling areas,
dairies and other places where both hot and cold water are desired. The recessed box conceals the hose connection and operating mechanisms.
1/4 turn of the key allows full flow to be obtained. The locking cover prevents unauthorized use.
OPTIONS:
Wall Thickness
3 1/4
1/8
1 1/2 *
1/2 Female
NPT Inlet
3/4 Hose
Connection
Key
3/4 Male
NPT Inlet
(5560QT only)
Side View
Adjustable
Wall Clamp
(Specify)
ADD
-CL
-E
-E1
-H
-HC1
-MF1
-SE
-SE1
-SS
-SS1
-W
-WC
-WH
Cylinder Lock ......................................................................148.00
Elbow Inlets ..........................................................................71.00
1" NPT Elbow Inlets ............................................................411.00
3/4" Vacuum Breaker ..........................................................108.00
1" Hose Conn Adaptor ........................................................168.00
1" Straight Female Inlets......................................................336.00
Sweat Elbow Inlets ................................................................75.00
1" NPT Sweat Elbow Inlets ..................................................411.00
Straight Sweat Inlets ................................................................N/C
1" Straight Sweat Inlets ......................................................336.00
"Water" on Cover ......................................................................N/C
Adjustable Wall Clamps ............................................................N/C
Wheel Handle ......................................................................458.00
-LB
-NB
-PB
-RB
Less Box..............................................................................721.00
NB Face, Deduct ....................................................................36.00
PB Face, Deduct ....................................................................55.00
RB Face, Deduct ....................................................................55.00
2 1/4 *
1” Male NPT
(5561QT only)
Hinged
Locking
Cover
DEDUCT
4
For Hydrant Parts Repair Kit, refer to Net Parts Price Guide.
SM I T H
10 1/2 **
SQ
*When specifying a 5561QT, add 3/4” to length of inlet connection as shown.
Front View
Fig. 5560QT
WALL
THICKNESS
5560QT
3/4"
INLET
5561QT APPROX
1"
WEIGHT
INLET
LBS
-SAP
08"
10, 12, 14"
16, 18"
20, 22, 24"
2,784.00
3,057.00
3,235.00
3,417.00
3,602.00
3,112.00
3,383.00
3,565.00
3,745.00
3,927.00
NOTES:
1. **Recommended Wall Opening 9 3/4" x 9 3/4".
2. When ordering, specify wall thickness in 2" increments as
follows: 6, 8, 10, 12, 14, 16, 18, 20, 22 or 24. When wall
clamp -WC is desired, increase wall thickness dimension by 2".
3. For 6" wall use 5560QT-SAP or 5561QT-SAP.
4. All Jay R. Smith hydrants are manufactured with "NO-LEAD"
brazing rings and USDA approved lubricants.
5. The AB1953, California Lead Law, and NSF/ANSI Standard
61-2008 - Drinking Water System Components are not
applicable to Jay R. Smith hydrants as they do not convey/dispense
water for human consumption through drinking or cooking.
6. FOR IRRIGATION PURPOSES ONLY.
12
13
14
15
17
REGULARLY FURNISHED: Bronze
Nickel Plated Quarter Turn Non-Freeze "TwinTemp" Hydrant with Hose Connection, "T" Handle
Key, and Bronze Box with Chrome Plated Face, and
Inlet Size Furnished as Indicated by Figure Number
Selected.
8
9
10
1c
13h
5
13h
7
11
NO.
DESCRIPTION
1 Head/Casing Assembly
1a Head
1b Casing
1c Valve Housing
2 Locking Device
3 Key
4 Cover
5 Hinge Pins (2)
4
13
1a
3
1b
6
2
*
11
*9
*
8
*
13h
*
10
NO.
13b
13c
13d
13e
13f
13g
13h
DESCRIPTION
Valve Body
Valve Actuator
Nylon Thrust Washer
Rotating Ceramic Disc
Fixed Ceramic Disc
Silicon Rubber Seal
Retainer Guide (2)
These Replacement Parts Available in HPRK-7 (2) Repair Kits
*
7
HYDRANT PARTS LIST
NO. DESCRIPTION
6 Box
7 Face Nut
8 Actuator Shaft
9 Actuator "O" Ring
10 Operator Rod
11 Face Nut Washer
13 Valve Body Assembly
13a Retaining Ring
*
* 13a
13h
*
13b
*
13c
*
13d
*
13e
*
13f
These Parts Accessible from Face of Hydrant by Removing Face Nut.
*
13g
330
†REGULARLY FURNISHED
Download PDF
Similar pages