Discrete Distribution Module Panels (DDM)

860636329
Rev, A Nov 2017
www.commscope.com
Discrete Distribution Module Panels (DDM)
General
The CommScope® discrete distribution module (DDM) panels are available in a 24- or 48-port, straight, angled
or recessed angled configuration.
The panel consists of a rack mounted base unit, rear cable management hardware, and labels for port
numbering. Each panel mounts in a 19-inch (483mm) equipment rack with universal hole spacing.
Ordering information is listed below:
Material ID
Part No.
Description
760237040 CPP-UDDM-SL-1U-24
CommScope Discrete Distribution Module Panel, SL, UTP, 1U, 24 port
760237041 CPP-UDDM-SL-2U-48
CommScope Discrete Distribution Module Panel, SL, UTP, 2U, 48 port
760237042 CPPA-UDDM-SL-1U-24 CommScope Angled Discrete Distribution Module Panel, SL, UTP, 1U, 24 port
760237043 CPPA-UDDM-SL-2U-48 CommScope Angled Discrete Distribution Module Panel, SL, UTP, 2U, 48 port
760237044 CPPR-UDDM-SL-1U-24 CommScope Recessed Angled Discrete Distribution Module Panel, SL, UTP, 1U, 24 port
760237045 CPPR-UDDM-SL-2U-48 CommScope Recessed Angled Discrete Distribution Module Panel, SL, UTP, 2U, 48 port
760237046 CPP-SDDM-SL-1U-24
CommScope Discrete Distribution Module Panel, SL, STP, 1U, 24 port
760237047 CPP-SDDM-SL-2U-48
CommScope Discrete Distribution Module Panel, SL, STP, 2U, 48 port
760237048 CPPA-SDDM-SL-1U-24 CommScope Angled Discrete Distribution Module Panel, SL, STP, 1U, 24 port
760237049 CPPA-SDDM-SL-2U-48 CommScope Angled Discrete Distribution Module Panel, SL, STP, 2U, 48 port
760237050 CPPR-SDDM-SL-1U-24 CommScope Recessed Angled Discrete Distribution Module Panel, SL, STP, 1U, 24 port
760237051 CPPR-SDDM-SL-2U-48 CommScope Recessed Angled Discrete Distribution Module Panel, SL, STP, 2U, 48 port
760236763 CPP-SDDM-SL-1U-48
CommScope Discrete Distribution Module Panel, SL, STP, 1U, 48 port
760207274 CPP-UDDM-M-1U-24
CommScope Discrete Distribution Module Panel, M-series, UTP, 1U, 24 port
760207282 CPP-UDDM-M-2U-48
CommScope Discrete Distribution Module Panel, M-series, UTP, 2U, 48 port
760207290 CPPA-UDDM-M-1U-24
CommScope Angled Discrete Distribution Module Panel, M-series, UTP, 1U, 24 port
760207308 CPPA-UDDM-M-2U-48
CommScope Angled Discrete Distribution Module Panel, M-series, UTP, 2U, 48 port
760237052 CPP-UDDM-KJ-1U-24
CommScope Discrete Distribution Module Panel, KJ, UTP, 1U, 24 port
760237054 UNP-UDDM-SL-1U-48
Uniprise Discrete Distribution Module Panel, Cat6, UTP, 1U, 48 port
760237055 UNPA-UDDM-SL-1U-48 Uniprise Angled Discrete Distribution Module Panel, Cat6, UTP, 1U, 48 port
For RoHS Inquiries:
CommScope Inc.
Corke Abbey, Bray
Co. Dublin, Ireland
Attn: Legal Department
© 2017 CommScope, Inc.
All rights reserved
This product is covered by one or more U.S.
patents or their foreign equivalents. For patents, see
www.commscope.com/ProductPatent/ProductPatent.aspx
Page 1 of 7
860636329
Instruction Sheet
www.commscope.com
760237060 NPP-UDDM-SL-1U-48
NETCONNECT Discrete Distribution Module Panel, Cat6, UTP, 1U, 48 port
760237061 NPPA-UDDM-SL-1U-48 NETCONNECT Angled Discrete Distribution Module Panel, Cat6, UTP, 1U, 48 port
Note: sample product images shown below.
DDM Flat UTP Panel CPP-UDDM-SL-1U-24
DDM Angled Panel CPPA-UDDM-SL-1U-24
DDM Recessed Angled Panel CPPR-UDDM-SL-2U-48
How to Contact Us

To find out more about CommScope® products, visit us on the web at www.commscope.com/

For technical assistance:
- Within the United States, contact your local account representative or technical support at
1-800-344-0223. Outside the United States, contact your local account representative or
PartnerPRO™ Network Partner.
-
Within the United States, report any missing/damaged parts or any other issues to CommScope
Customer Claims at 1-866-539-2795 or email to claims@commscope.com. Outside the United
States, contact your local account representative or PartnerPRO Network Partner.
Tools Required


Phillips head screwdriver
Flat blade screwdriver, max 2.9mm dia.
Page 2 of 7
www.commscope.com
860636329
Instruction sheet
Parts List
Verify parts against parts list below:
Quantity
Description
24-Port
Flat Panel
48-Port
Flat Panel
24-Port
Ang Panel
48-Port
Ang
Panel
24-Port
R-Ang Panel
48-Port
R-Ang Panel
1
―
―
―
―
―
24-port flat panel
―
1
―
―
―
―
48-port flat panel
―
―
1
―
―
―
24-port angled panel
―
―
―
1
―
―
48-port angled panel
―
―
―
―
1
―
24-port recessed angled panel
―
―
―
―
―
1
48-port recessed angled panel
4
4
4
4
4
4
P12-24 x ½” mounting screws *
1
2
1
2
1
2
Adhesive label (5 per strip)
1
2
1
2
1
2
Cable management bar
4
8
4
8
4
8
Hook-and-loop straps
2
4
2
4
2
4
M4 Hex nut with lock washer **
1
1
1
1
1
1
Instruction sheet
WARNING – Important Safety Instructions
When using this product, the following basic safety precautions should be followed to reduce the risk of fire,
electric shock, and injury to persons:
1. Never install communications wiring in wet locations unless it is designed for wet locations.
2. Never install this product during a lightning storm. There is a remote risk of electric shock.
3. Never touch uninsulated communication wiring or terminals unless the communication circuit has been
disconnected at the network interface.
4. Caution: All wiring that connects to this equipment must meet applicable local and national building codes
and network wiring standards for communication cable.
*
Netconnect Panels do not include 12-24 mounting screws.
** Hex nut and washer only included in shielded panels.
Page 3 of 7
860636329
Instruction Sheet
A. Installation of Panel
Step 1 – Mount Panel to Rack
1. Mount panel to rack.
Step 2 – Assemble and Install Rear Cable Manager
1. Attach cable bar as shown and insert four hook-and-loop straps to cable bar.
Page 4 of 7
www.commscope.com
www.commscope.com
860636329
Instruction sheet
Step 3 – Populate Panel with Jacks and Connect Ground *
48-Port Panel
1. Connect cables to jacks per instructions provided with the individual jacks.
2. Populate panel with jacks and route cabling as shown.
Note: Secure cables using the hook-and-loop straps provided.
3. * For shielded panels only, use one of two grounding lug
connections provided on rear of panel and hex nut with lock
washer to ground the panel per approved local practices.
Panel Ground
Page 5 of 7
860636329
Instruction Sheet
www.commscope.com
Step 4 – Attaching Information Labels
DDM Information
Label (4 places)
Figure 1
Figure 2
1. Enter information on the white information labels provided. Note that mounting surfaces should be cleaned
prior to attaching labels. Remove protective backing from labels and attach as shown in figure 1.
2. Print port designations on label sheets provided. Insert labels and label retainers as shown in figure 2.
3. To print a designation label, go to http://www.commscope.com/Resources/Labeling-Templates and scroll
down to Panels and select the proper label template.
Note: Labeling website has two options for printing labels; letter size and A4 size.
Page 6 of 7
www.commscope.com
860636329
Instruction sheet
B. To Remove a Jack from Panel
12 Port Jack Removal
6 Port Jack Removal
1. Insert a small, 2.9mm dia. max flat-blade screwdriver into the slot above the jack and rotate to release the
latch.
2. Remove jack from rear of panel.
3. Note – cable management bar may need to be removed to enable access to the release slot on some jack
positions.
M-Series Jack Removal
Page 7 of 7
Download PDF
Similar pages