Blueair Sense+
User Manual
The intelligent, Wi-Fi enabled Blueair Sense+TM cleans your indoor air completely five times in an hour,
turning any room up to 18 square meters (186 square feet) into a healthy air zone. You can control it
wirelessly with a smartphone – or automatically with the Blueair AwareTM air monitor that also gives air
quality readings.
Before using Blueair Sense+, please read this user manual carefully.
Contents
General safety information
Get the most out of it
Place it
Start it
Connect it wirelessly to your smartphone
Control it
Care for it
Change filter
Blueair filter subscription program
Help and support
Warranty information
Technical specifications
5
7
7
7
7
9
10
11
13
13
13
14
Welcome to your new air purifier
General safety information
The Blueair Sense+ air purifier is an electrical appliance. Please take the necessary precautions to
reduce the risk of fire, electric shock or injury.
2
The plug fits into a grounded outlet – do not alter the plug in any way.
Plug Sense+ directly into an appropriate electrical outlet – please refer to the voltage label on your unit.
3
1
This unit can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given
supervision or instruction concerning use of the unit in a safe way and understand the hazards
involved.
4
1
2
3
4
5
Air outlet
Display (motion sensor controlled)
LED (lit when Sense+ is purifying air)
Air intake
Power cord
Children must not play with the appliance.
Cleaning and maintenance must not be done by children without supervision
Please do not use the device with any non-Blueair accessories
Active carbon
filter sheet (2)
Blueair Sense+
HEPASilentPlus filter (2)
Welcome card
5
User manual
Cleaning cloth
Kit box
Sense+ comes with Blueair’s patented HEPASilentPlusTM – the world’s most advanced and silent filter system. It’s
a revolutionary combination of mechanical and electrostatic filtration. Air is drawn into the air purifier where large
airborne particles and gaseous pollutants are captured in the first filter cassette. The air continues through an ion
chamber where particles not captured mechanically are charged with negative ions, so they get attracted and caught
by oppositely charged fibers in the second filter cassette. The purified air, virtually contaminant-free, is then re-circulated into the room.
4
5
Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Get the most out of it
Maximum speed is recommended for fast initial cleaning or for heavily polluted air. After a few minutes,
the speed can be reduced. Minimum speed is generally recommended for nighttime use.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
For best results, run Sense+ 24/7. This ensures that clean, filtered air constantly circulates throughout
the room. Sense+ uses as little as 7 W, less than a low-energy light bulb.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Sense+ should be placed in a location that allows air to circulate freely in, out and around the unit.
Minimum distance from another object is 10 cm.
Place it
Don’t place the unit:
Directly on or against soft furnishings, such as bedding or curtains.
Near sources of heat, such as radiators, fireplaces or ovens.
Near wet areas, such as bathrooms or laundry rooms, where it may come into contact with water.
Outdoors.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Start it
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Plug Sense+ into a grounded electrical outlet with the supplied power cord. To turn it on for the first
time, sweep your hand over the top display. A blue LED on the front side indicates that the unit is
working.
This Class B digital apparatus complies with Canadian ICES-003.
FCC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a
separation distance of at least 20 cm from all persons.
FCC ID: 2AEX3-Sense+
IC ID: 20267-Sense+
6
7
Connect it wirelessly to your smartphone
Control it
1. Download the Blueair FriendTM app to your smartphone (available for iPhone and Android).
Thanks to built-in Wi-Fi you can adjust the settings on Sense+ both wirelessly and manually.
2. Activate Sense+ by sweeping your hand over the top display – when a Wi-Fi symbol and a circle
are pulsing, Sense+ is ready to be connected to the Blueair app.
Wirelessly with the Blueair app:
Adjust airflow speed
Tap in circle to change speed. Off = all circles are gray.
Adjust LED intensity
Tap in circle to change intensity. Off = all bars are gray.
Child lock
Tap in circle to switch child lock on/off. When on, you can adjust airflow speed only with the
app, not on the unit.
Auto mode
3. Make sure you are connected to the Wi-Fi network you want Sense+ to be connected to. Start the
app and follow setup instructions. For more information, tap on
(Support) “FAQ” or “Troubleshooting”.
4. Now Sense+ is connected to your smartphone and can be controlled wirelessly.
Enabled only if you have both the Blueair Aware and the Sense+ connected to the app. In Auto
mode the Blueair Aware controls the Sense+ automatically, based on real-time indoor air
quality analyses.
Tap in circle to switch Auto mode on/off.
Tap to choose which Blueair Aware device you want to control the Sense+
Night mode
Change airflow speed and LED intensity during selected hours and weekdays.
Tap in circle to switch Night mode on/off.
Tap in circle to change airflow speed. Off = all circles are gray. This speed will only apply during the times and on the days that Night mode is set for.
Tap in circle to switch LED on/off. This setting will only apply during the times and on the days that Night mode is set for.
Drag/tap in outer circle to set start and end time.
Tap to select days.
(Default Night mode settings are airflow speed 1 and LED off during all days between 9 PM and 7 AM.)
8
9
Manually with motion sensor control:
Change airflow speed by simply swiping your hand over the Sense+ top display. One swipe takes
you to the next speed setting.
Unit off or display on standby for energy saving.
Speed setting 1.
Change filter
Sense+ comes with Blueair’s patented HEPASilentPlus, the world’s most advanced and silent filter
system. The unit uses two filter cassettes. Each cassette consists of two parts:
Advanced particle filter – removes dust, pollen, pet dander, mold spores, bacteria, viruses and
other airborne pollutants down to the tiniest particle.
Active carbon filter sheet – removes gaseous pollutants such as cigarette and cigar smoke or other
VOCs (volatile organic compounds, including household paint and other chemicals).
To ensure the unit’s high quality performance we recommend that you only use original Blueair filters,
replacing them every 6 months.
Speed setting 2.
Speed setting 3 — next swipe will turn the unit off.
FILTER
Care for it
To keep Sense+ in top condition, we recommend routine cleaning. Always disconnect the unit from
the electrical supply before cleaning or maintenance.
When change is required, a red indicator light will show on the
top display.
Filter change step-by-step:
Vacuum the small inlets with a soft brush.
Vacuum the air intake grille from the inside (e.g. when you change filter).
Wipe the exterior with the supplied cleaning cloth.
What you can’t do:
Never clean Sense+ with gasoline, chemical solvents or corrosive material – these agents may
damage the surface.
Never allow foreign objects to enter the ventilation or exhaust openings – this may cause electric shock or damage the unit.
Never try to repair or adjust any of the electrical or mechanical functions yourself. Contact your
local Blueair retailer.
10
1. Turn off the unit, pull out the power plug, and
put the unit down with the backside facing up
(on a soft surface like a blanket).
2. Pull out the two filter cassettes using the
handles. You may need to pull firmly.
11
Filter checklist
To make it easy to find the right filter in the future, please fill in the customer record below and keep
this user manual for reference. The model number and serial number of this product can be found on
the bottom of the unit.
3. Take out the particle filters and carbon filter
sheets from each cassette.
4. Push in the new filters in each cassette.
Model number
Retailer’s name
Serial number
Retailer’s address
Date of purchase
Telephone number
Blueair filter subscription program
This convenient service is available in some countries – contact your local Blueair retailer to find out if
you can join.
5. Make sure the carbon filter sheets stay in
place by pressing down the filters below the tabs
on the cassettes.
6. Slide the filter cassettes back into place.
For more information, start the Blueair app and tap on
(Support) “FAQ” or “Troubleshooting”. If
you can’t solve the issues, please visit www.blueair.com or contact your local Blueair retailer.
Warranty information
CHANGE
FILTER
7. Plug in the power cord, put the unit in upright position, and press on the red filter replacement indicator
for 30 seconds. Your Sense+ is ready once again
to ensure you are breathing cleaner, healthier air.
12
Help and support
Detailed instructions
for filter changing
also come with your
new filter.
Blueair warrants the included hardware product and accessories against defects in materials and
workmanship. Warranty benefits may vary locally. Full terms and detailed information about what
applies in your country is available at www.blueair.com. To extend your limited warranty, register in
the Blueair app (tap on “Profile”) or on our website.
13
Technical specifications*
CADR**
Smoke
120
Room size
Air changes per hour (ACH)***
Airflow (Speed 1-2-3)
Size (HxWxD)
Product weight:
Energy consumption (Speed 1-2-3)****
Sound pressure level
Filter replacement indicator
Speed control options
Pollen
Dust
140
150
186 ft2 (18 m2)
5
35-84-150 cfm (60-155-255 m3/h)
19.5x18.5x6.7 in (492x470x170 mm)
24 lbs (11 kg)
7-20-45 W
29-40-50 dB(A)
Yes
1-2-3, non-touch, smartphone
The entire unit can be recycled.
External network issues affecting the product performance are beyond the control of Blueair. Please contact your
Internet service provider for assistance.
*
**
***
****
14
Specifications based on U.S. models (120 VAC, 60 Hz with particle filter).
The CADR indicates how much filtered air is delivered (airflow) by the air purifier operating at the highest
setting, and how well the system removes tobacco smoke, dust and pollen pollutants from the air (efficiency).
Tests are performed in accordance with ANSI/AHAM AC-1. The maximum possible CADR ratings according
to this standard are: Tobacco Smoke: 450 cfm. / Dust: 400 cfm. / Pollen: 450 cfm.
Air changes per hour are calculated on the recommended room size, assuming 8-foot (2.4 m) ceilings. For
smaller rooms, the air changes per hour will increase.
The available electrical power voltage and frequency affects the power consumption of the unit. The power
consumption might therefore be different from the stated value.
www.blueair.com
Blueair AB
Danderydsgatan 11
SE-114 26 Stockholm
Sweden
Tel: +46 8 679 45 00
Fax: +46 8 679 45 45
info@blueair.se
Blueair Inc.
Suite 1900,
100 N LaSalle Street
Chicago, IL 60602
Tel: +1 888 258 3247
Fax: +1 312 727 1153
info@blueair.com
900063 SENSE+_EN_UM_Rev01
Blueair India Pvt. Ltd.
Embassy of Sweden
Nyaya Marg, Chanakyapuri
New Dehli – 110021
Tel: +91 11 4606 7121
Fax: +91 11 4606 7120
india@blueair.se
Blueair (Shanghai) Trading Co. Ltd.
Rm 1005 City Gateway
No. 398 North Caoxi Road
Xuhui Distr, Shanghai
Tel: +86 21 6091 0981
Fax: +86 21 6091 0989
info@blueair.cn
Download PDF
Similar pages