cfs0018_UK_R1_menvier-data-sheets_Layout 1 04/08/2011 12:05 Page 63
Intelligent Addressable Product Range
Touch Screen Repeater Panel DTPR6000
DTPR6000 touch screen repeater panel
Overview
Features
The DTPR6000 touch screen repeater panel
provides sophisticated ‘touch screen’ functionality
yet achieves a simple end-user interface operation
within a compact panel design.
• Plug and play. All information is
downloaded through the
network
• Touch-screen display
• Integrated network capability
allows networking with the
latest Menvier range of
intelligent addressable fire
alarm control panels
• Multi language capability
• Up to 126 repeaters can be
connected to the network
• Programmable as an active or
passive repeater
The DTPR6000 is designed to work with all Menvier
intelligent addressable fire alarm control panels as
well as other network repeaters.
The Menvier touch-screen repeater panel is easy to
install and commission. All text is transmitted via the
network and is automatically updated.
Benefits
• Plug and play requires no
programming
• User friendly touch screen
display
• System integrity, fire alarm
system continues to operate
even if there is a short circuit or
open joint on cable
• Multi language capability
cfs0018_UK_R1_menvier-data-sheets_Layout 1 04/08/2011 12:05 Page 64
Touch Screen Repeater Panel - DTPR6000
Dimensions
D
Technical Specification
W
Code
DTPR6000
Description
Touch screen repeater panel
Standards
EN54 Pt4
Specification
H
H (mm)
375
W (mm)
537
D1 (mm)
50
Mains Input Voltage
230V ac +10% / -15%
Operating Voltage
24V dc
System Indicators
Power on, fire, fault, test, disable and scroll
System Controls
Silence alarms, evacuate and reset
Input Ports
RS232 (for connection of programmer)
Battery
2 x 12V 3.2Ah
Standby Duration
24 hours
Environmental
Operating Temperature
-5°C to +40°C
Humidity (Non Condensing)
0 to 75% RH
Physical
Construction
PC/ABS
Colour
Graphite
Dimensions (H x W x D)
375mm x 357mm x 50mm
Weight
8kg
Ingress Protection
IP30
Compatibility
Suitable for use with
Network Connected
Menvier intelligent addressable fire systems
Installation
Device Overview
•
•
•
•
•
•
• Panel is connected to the
network as part of a networked
system.
• Supplied with integral power
supply and standby battery.
• Touch screen user interface.
Wall mounted by means of 4 fixing screws.
Cable entry at top or back.
11 top entry gland holes.
Separate rear access cable entry facility.
Local mains supply required.
Must be network connected.
System Functionality
Mains Supply
Network Link
• Panel operates in either normal, supervisor or
engineer mode.
• Supervisor and engineer modes are accessed via
4 digit pass codes.
• Supervisor mode allows full system operation.
• Engineer mode enables password to be changed if
required and allows access to text download menu
• When connected to network, all text is transmitted
via network, changes to other network panels
update automatically.
Standard Connection
+24V dc
IN
+24V dc
OUT
NETWORK 1
NETWORK 2
+ -
+ -
A B X Y E
A B X Y E
FAULT
RELAY
AUX
RELAY
PROGRAMMABLE
INPUT
NO C NC NO C NC
TO PANEL EARTH
Product Codes
Code
DTPR6000
Description
Intelligent addressable touch screen repeater panel
Cooper Lighting and Safety Ltd, Wheatley Hall Road, Doncaster, South Yorkshire, DN2 4NB. UK.
T: +44 (0) 1302 303350 l F: +44 (0) 1302 303332 l E: techsupport@cooperfire.com l W: www.cooperfire.com
E
Download PDF
Similar pages