Electronic Shower Kits
Electronic Shower Kits
PREMIX Electronic Shower Panels
TEMPOMATIC Individual Electronic Showers
activates by presence detection, featuring:
1/2"
82
210
0,81
- Presence detector.
- Electronic unit with 1/2" solenoid valve.
- 230/12V transformer.
- Time flow adjustable from 30-60 seconds.
• with cross wall detector for 150mm* partitions
• with recessed detector
battery-operated by 6V Lithium batteries, for exposed surface mounting.
Anodised aluminium shower panel with hidden fixing, featuring:
12Vca
1/2"
66
452150
452150
452565
230Vca
1044
*Other lengths available on request.
> Shower head not included (see pages 84-87).
> We recommend installing a thermostatic mixing valve (see pages 99-117).
and floor traps for drainage.
210
66
12Vca
1/2"
1/2"
Operating Modes:
- automatic activation when user is detected at 60cm (automatic shut
off 2 seconds after the user departs).
- voluntary activation by passing a hand in front of sensor -10cm; shutsoff when hand is detected for a second time.
Operation: Activates when user presence is detected.
- Valve opens when a hand is detected within 4cm of the sensor.
- The valve closes (when the hand is detected for a second time)
or automatically (after 1 minute = safety shut-off).
- Temperature control on the thermostatic valve.
1044
792400
Advantages:
- Anti-Legionella: HW supply > 60°C up to the panel and duty flush
programmed every 24 hours after the last use.
(Duty flush for 1 minute prevents water stagnation and the development
of bacteria in the pipework = risk prevention).
- Anti-scalding safety: immediate HW shut-off in case of CW supply failure.
- Comfort: constant temperatures and precise temperature control.
- 80% water savings: automatic shut-off and set flow rate.
- Vandal proof and minimal servicing.
452565
Anti-Legionella: automatic duty flush for 45 seconds every 24 hours after
the last use to avoid water stagnation and the proliferation of bacteria in
the pipework.
792410
TEMPOMATIC Individual Showers
TEMPOMATIC Reflex Showers
with concealed detector.
- PREMIX single thermostatic valve.
- Infra-red sensor detects user presence, powered by a 6V Lithium
battery.
- Vandal proof, ROUND chrome-plated shower head with scaleproof nozzle and automatic flow rate regulator set at 6 lpm.
- M1/2" connections with integrated filters and non-return valves.
• with top inlets (incorporating stopcocks)
M1/2"
792400
15mm for compression fittings
79240015
• with back inlets (without stopcocks)
M1/2"
792410
449620
Infra-red electronic barrier for shower corridors or hygienic
foot baths, featuring:
PREMIX Electronic Shower Panels
- Recessed lateral detector (D) with reflector (R) for the detection
barrier (detection distance 6m maximum).
- Electronic unit (ME) with 3/4" solenoid valve (MH) and stopcock,
M3/4".
230Vca
- 230/12V transformer (T).
MH
TEMPOMATIC Multifunction for 4 or 8 points-of-use
138
122
168
441452
T
12Vca
ME
152
4000
167 max.
Operation:
D
TEMPOMATIC Reflex Showers
R
IR (6m maxi)
When the user cuts the infra-red barrier, the solenoid valve opens for
10 - 60 seconds depending on the time flow pre-set. The cycle will
restart when a second user cuts the barrier, even if the water is flowing.
TEMPOMATIC REFLEX can supply 1 - 5 ceiling-mounted shower heads
(see pages 84-87).
Ø 24
Ø 60
4
Ø 21
> Shower head not included (see pages 84-87).
> We recommend installing a thermostatic mixing valve
(see pages 99-117) and floor traps for drainage.
4000
441452TCP
495626CEB
461035CEB
4000
449620
683002
> For further information see page 89.
100 x 100
Ø 40
• 1/2" for washbasin, shower or urinal
• direct flush 1" for WC direct flush valve.
495626CEB
461035CEB
* Red and Blue markers available on request.
TEMPOMATIC Multifunction
• 100 tokens Ø 24 double groove
371100
Pack of 100 tokens for timer with adjustable delay (for use with
older models with timing from 5 - 10 minutes).
Ø 165
108,5
108,5
Ø 165
Ø 40
1/2"
683001
682001
We recommend installing a thermostatic mixing valve upstream of the panel
(see pp.99-117) and a floor trap for drainage (see p.89).
370DC
TOKEN TIMERS
Ø 175
93
18 - 85
160
Ø 121
64
683002
,5
683002
54
Ø 40
200
Ø 165
406000
12Vca
230Vca
406220
THESE PRODUCTS WILL WITHSTAND THERMAL AND CHEMICAL SHOCKS subject to compliance with current protocols.
TRANSFORMERS 230/12V
for TOKEN TIMER
51
FLOOR TRAPS
74
Solenoid valve with 4m cable (6V)*
Solenoid valve opens when a token is inserted. Cover can be locked.
Tokens and transformer are not included (see below).
• with solenoid valve attached (1/2"12V)
370DC
13 - 80
Max. 85
150x150
108,5
For vinyl floors
• Ø 115, polished stainless steel grid
height adjustable up to 85mm (with extension).
Cross wall control for walls upto 165mm thick with chrome-plated
wall plate Ø 50/15 and 4m cable with quick-fit connectors.
• touch-pad control, cross wall with 4m cable 441452TCP
• infra-red control, cross wall with 4m cable
441452DET
with adjustable timing from 1 - 10 minutes.
198
with stainless steel grid, fixed by 2 stainless steel screws
682001
441452/SEC001
441453/SEC008
TOKEN TIMERS
122
88
FLOOR TRAPS with Adjustable Height
683001
• 4-Way Electronic control unit 230/12V
• 8-Way Electronic control unit 230/12V
For further information see pages 92-93.
Anti-Legionella: automatic duty flush for 45 seconds every 24 hours
after the last use to avoid water stagnation and the proliferation of bacteria
in the pipework.
- Water level 50mm and flow rate 36 lpm (EN 1253).
- PVC body. Adjustable height plate. Vertical outlet Ø 40.
For tiled or concrete floors
• 150x150, polished stainless steel grid
683001
height adjustable up to 85mm (with extension).
• 100x100, polished stainless steel grid
682001
height adjustable up to 80mm (with extension).
Delabie BB792
Valve certified TMV3 BC199 0906
BuildCert Application no. BC925
• transformer only (without box)
suitable for DIN rail mounting.
406000
• transformer with grey PVC waterproof wall box
(200 x 160 x 93) with bipolar switch.
406220
TRANSFORMERS
THESE PRODUCTS WILL WITHSTAND CHEMICAL AND THERMAL SHOCKS subject to compliance with current protocols.
75
TEMPOMIX Shower Kits
TEMPOMIX Shower Kits
76
Description
TEMPOMIX Exposed Showers
Shower kit for exposed wall mounting with:
10
20° ±
- Single control time flow mixer ~30 seconds in chrome-plated
solid brass with integrated non-return valves and filters. MM3/4"
inlets.
- Vandal proof TONIC-JET fixed shower head with scale-proof
nozzle and automatic ECO flow rate regulator set at 6 lpm.
- Reinforced shower column Ø16 and collar.
10
20° ±
1010
1010
TEMPOMIX single control mixer shower kit with
automatic timed shut-off and vandal proof,
fixed shower head with scale-proof nozzle
and flow rate set at 6 lpm (at 3 bar).
• Time flow ~30 seconds +5/-10
• Maximum temperature limiter* can be set by
the installer.
• Integrated non-return valves and filters.
• 10 year warranty.
76
• with 2 angled connectors and stopcocks
790006
with adjustable flow rate and spacing M1/2" F3/4" (ref. 836020)
and integrated stopcock, 150mm centres
18
Advantages
30
3/4"
1/2"
112
790008
790001
20
Ø 50
• with two angled connectors
without stopcocks (ref. 838020), 150mm centres
790008
• without connectors
MM3/4", 90mm centres.
790001
30
H
1/2"
> We recommend installing a thermostatic mixing valve for MW supply
(see pages 99-117) and a floor trap for drainage (see page 89).
Option: shower head with spray grid "GR" (see page 88).
H
• Comfort and user safety
- The user can adjust the temperature.
- Maximum temperature limiter* can be set by
the installer.
• Water savings: 80%
compared to a conventional mixer 15 lpm.
• Vandal Resistant
protective wall plate in chrome-plated solid
brass and through-the-wall option.
18
1/2"
31
Ø 50
TEMPOMIX Exposed Showers
836020
838020
27
TEMPOMIX Recessed Showers
35
Recessed shower kit featuring:
Uses
All individual or group showers. Swimming
pools, campsites, leisure centres, MOD and
accommodation, factories, boarding schools, etc.
37,5
• Maximum temperature limiter* can be set by the
installer and the push-button control is insulated.
• Integrated filters and non-return valves.
Specifically designed for intensive use in public
places. Chrome-plated solid brass protective
wall plate.
M
80% water savings
• Automatic flow rate regulator at 6 lpm.
• Automatic timed shut-off delay (~30 seconds).
* We recommend installing a thermostatic mixing
HW
CW
790…
valve to provide safe, temperature controlled hot
water. Where thermostatic mixing valves are
installed, the temperature limiter must be removed.
76
76
Reliability
• Foolproof mechanism. Designed from scale
and corrosion proof materials. Hydraulic time
flow system with self-cleaning calibrated groove.
• Will operate for more than 500,000 operations.
10-30
1/2"
1/2"
0
20°±1
0
20°±1
See technical characteristics on previous page.
Ø 14
31-43
1/2"
Ø 195
Vandal Resistant
Minimal Servicing
MW
1,10m
Safety
Easy to operate and user can adjust the
temperature.
31-53
55-77
30-42 28-46
1 - 220
TEMPOMIX RECESSED SHOWER with waterproof box:
> prevents water ingress behind the partition (i.e. water from the tiles).
> allows condensation or leaks to drain by a small chanel in the seal.
• Quick to install, with an adjustable recessing depth between 10 - 30mm.
Connectors and stopcocks are integrated.
• Vandal proof: hidden fixings and shockproof mechanism.
1/2”
Ø 20,5
796202
31
3/4”
Ø 20,5
Ø 70
3/4”
Ø 50
31
132
1 - 220
53
1 - 220
1/2”
35
ø 20,5
796209
Maintenance (instructions available on request).
31
3/4”
ø 20,5
ø 70
45
The interchangeable cartridge, non-return valves and
filters are accessible without removing the mixer.
76
45
Installation (instructions available on request)
3/4”
ø 50
31
• with standard recessing box
featuring 3/4" Tempomix mixer with connectors for Ø14 copper
tube, without stopcocks, and with vandal proof TONIC-JET fixed
shower head (ref. 712000). Adjustable recessing depth from 10mm.
with Ø 195 wall plate
790912
satin stainless steel wall plate 160x160mm
790712
790712
790912
The nozzle does not need de-scaling.
• Balance the CW and HW pressure (ΔP < 1 bar)
• Recommended pressure 1- 5 bar.
• Supply with HW at 60°C using a TMV
(see pp.99-117).
• If necessary protect the supply pipes with
strainers and pressure reducers.
• Protect the mechanism and the non-return
valves with the filters supplied.
• with waterproof recessing box and chrome-plated brass
wall plate 161 x 220mm featuring 3/4" Tempomix mixer with
1/2" stopcocks. Adjustable recess depth from 10 - 30mm.
pre-assembled recessing kit featuring:
790BOX
recessing box, protective cover and hydraulic connector
(to connect to control assembly 790219 or 790212).
control kit with ROUND shower head featuring: 790219
wall plate, chrome-plated push-button control and ROUND shower head
control kit with TONIC-JET shower head featuring: 790212
wall plate, chrome-plated push-button control and TONIC-JET sh. head
160 x 160
C
2,10m
Comfort
H 160 x L 220
3/4”
1/2”
83
Flow rate can be adjusted without removing
the mechanism and cutting off the water
supply (DELABIE patented). Use a 3mm Allen key.
25 °±10
24
• Opens by pressing on the push-button control.
• Temperature selection by turning the pushbutton control.
• Automatic timed shut-off after ~30 seconds
(+5/-10) of flow.
- Single control time flow mixer ~30 seconds in chrome-plated
solid brass with non-return valves and integrated filters.
- Vandal proof, fixed shower head with scale-proof nozzle and
automatic ECO flow rate regulator set at 6 lpm.
Chrome-plated solid brass body, with vandal proof fixing.
1/2"
H 108 x L 129
T
Maximum temperature limiter is located
underneath the push-button control.
Operation
H 200 x L 259
FORT OM
OMFOR
-C
MFORT
CO
132
1 - 220
53
TEMPOMIX Recessed Showers
NEW
Vandal proof shower kit for through-the-wall installation, with:
TEMPOMIX Cross Wall Showers
- Through-the-wall control, M3/4", for walls 170 - 220mm with
single control time flow mixer ~30 seconds in solid brass with
integrated non-return valves and filters.
- Vandal proof fixed shower head, M1/2", with scale-proof nozzle
and automatic ECO flow rate regulator set at 6 lpm, for throughthe-wall installation for walls 170 or 220mm thick.
• for walls 170mm, ROUND shower head
• for walls 220mm, ROUND shower head
796159
796209
• for walls 170mm, TONIC-JET shower head
• for walls 220mm, TONIC-JET shower head
796152
796202
For more information regarding: Shower heads see pages 84-87.
Secure Sector see pp. 46-53 and 90-97.
TEMPOMIX Cross Wall Showers
> We recommend installing a thermostatic mixing valve for MW supply (see pp.99-117) and a floor trap for drainage (see p.89).
76
THESE PRODUCTS WILL WITHSTAND CHEMICAL AND THERMAL SHOCKS subject to compliance with current protocols.
77
TEMPOSTOP Shower Kits
TEMPOSTOP Shower Kits
TEMPOSTOP Exposed Shower
76
Description
Shower kit for exposed wall mounting with:
TEMPOSTOP shower kit with automatic timed
shut-off valve and vandal proof, fixed shower
head with scale-proof nozzle and flow rate set
at 6 lpm (at 3 bar).
• For mixed water supply.
• Time flow ~30 seconds +5/-10.
• Pre-set flow rate can be adjusted at installation.
• 10 year warranty.
- Time flow valve ~30 seconds in chrome-plated solid brass for
M3/4" bottom inlets, supplied with mixed water.
- Vandal proof TONIC-JET fixed shower head with scale-proof
nozzle and automatic ECO flow rate regulator set at 6 lpm.
- Reinforced shower column Ø 16 and collar.
1000
10
20°±
749001
• 3/4" BSP(M) inlet
• 15mm for compression fittings
749001
749002
We recommend the following connector for the water inlet for us
in conjunction with Ref. 749001:
Advantages
• Vandal proof and superior endurance.
• Anti-blocking safety system.
• Water savings: 80%
compared to a classic mixer 15 lpm.
Angled connector with stopcock
M1/2" F3/4" with stopcock and adjustable spacing.
3/4"
31
30
H
20
1/2"
836020
> We recommend installing a thermostatic mixing valve upstream of the
panel (see pp.99-117) and a floor trap for drainage (see p.89).
Option: shower head with spray grid "GR" (see p.88).
836020
Ø 50
TEMPOSTOP Exposed Shower
TEMPOSTOP Recessed Shower
27
76
1 /2"
Recessed shower kit with waterproof box and chromeplated brass wall plate 161 x 220mm featuring:
35
25 °±10
24
Operation
Uses
• Opens by pressing on the push-button control.
• Automatic timed shut-off after ~30 seconds
(+5/-10) of flow.
• Spray formed by a scale-proof nozzle.
All individual or group showers. Swimming
pools, campsites, leisure centres, MOD, factories,
boarding schools, etc.
- Waterproof box with 3/4" Tempostop time flow valve ~30 seconds
and 1/2" stopcocks (ref. 749220) supplied with mixed water.
Adjustable recessing depth between 10 - 30mm.
- Vandal proof fixed shower head with scale-proof nozzle and
automatic ECO flow rate regulator set at 6 lpm.
1/2"
20°±10
709000
712000
• pre-assembled recessing kit featuring:
749BOX
recessing box, protective cover and hydraulic connector
(to connect to control assembly 749239 or 749232).
37,5
• Flow rate can be adjusted without removing
the mechanism or shutting off the water supply
(DELABIE patented). Use a 3mm Allen key.
Specifically designed for intensive use in public
places.
• Foolproof mechanism. Designed from scale
and corrosion proof materials. Hydraulic time
flow system with self-cleaning calibrated groove.
• Will operate for more than 500,000 operations
(certified NF/CSTB).
• Foolproof and shockproof mechanism.
• Tamper proof installation. For Secure Sector
environments a wall plate with reinforced
fixing by 4 screw is available (ref. 824800)
and the installation can be recessed or
through-the-wall.
80% Water saving
2,10m
• Automatic flow rate regulator at 6 lpm.
• Automatic timed shut-off delay
(~30 seconds).
MW
1,10m
M
HW
1/2”
• control kit with ROUND shower head
749239
featuring: wall plate, chrome-plated push-button control and
ROUND shower head (ref. 709000).
H 160 x L 220
Reliability
H 200 x L 259
Vandal Resistant
83
• control kit with TONIC-JET shower head
749232
featuring: wall plate, chrome-plated push-button control and
TONIC-JET shower head (ref. 712000).
10-30
749…
> We recommend installing a thermostatic mixing valve upstream of the
panel (see pp.99-117) and a floor trap for drainage (see p.89).
Comfort
TEMPOSTOP Recessed Showers
• Easy to operate.
• Automatic flow rate regulator and angle of
spray can be adjusted at installation.
1-200
TEMPOSTOP Cross Wall Showers
76
Vandal proof shower kit for through-the-wall installations, with:
Minimal Servicing
1/2”
The nozzle does not require any maintenance or
de-scaling, contrary to traditional grid systems.
Ø 20,5
1/2”
- Through-the-wall control for walls 150 or 200mm thick with
M1/2" time flow valve ~30 seconds in solid brass, supplied with
mixed water.
- Vandal proof fixed shower head, with scale-proof nozzle and
automatic ECO flow rate regulator set at 6 lpm, for through-thewall installation for walls 150 or 220mm thick.
- Totally vandal proof: hidden fixings and an anti-rotating pin.
Ø 20,5
Ø 50
CW
1/2”
75 min.
1-200
28
749212
Installation (information available on request)
• Tempostop should be supplied with safe,
blended water, we recommend installing
a group thermostatic mixing valve (see pp 99-117).
• Recommended pressure: 1-5 bar.
• If necessary protect the installation with cartridge
filters and pressure reducers.
• Thoroughly flush the pipework before installation
and commissioning of mixers and taps.
TEMPOSTOP RECESSED SHOWER with waterproof box:
1-200
> prevents water ingress behind the partition (i.e. water streaming down the tiles).
> allows condensation or leaks to drain by a small channel in the seal.
• Quick to install, with an adjustable recessing depth between 10 - 30mm with integrated
stopcocks and connectors.
• Vandal proof: hidden fixings and shockproof mechanism.
M 1/2
25°± 10
Ø 20,5
Ø 20,5
1/2”
35
Ø 50
1/2”
75 min.
1-200
28
749219
Maintenance (information available on request).
The cartridge (time flow mechanism)
is interchangeable.
AB
24
AB
• for walls 1 - 150mm, TONIC-JET shower head
• for walls 1 - 200mm, TONIC-JET shower head
• for walls 1 - 200mm, TONIC-JET shower head
with Anti-blocking safety, time flow 15 seconds
749152
749212
747213
• for walls 1 - 150mm, ROUND shower head
• for walls 1 - 200mm, ROUND shower head
• for walls 1 - 200mm, ROUND shower head
with Anti-blocking safety, time flow 15 seconds.
749159
749219
747214
Back-nut with 3 screws
826315
(reinforcing flange behind the partition)
826315
Other sizes available on request.
> Please contact us for other solutions specifically for prisons.
See Secure Sector pages 46-53 and 90-97.
> We recommend installing a thermostatic mixing valve upstream of the
panel (see pp.99-117) and a floor trap for drainage (see p.89).
TEMPOSTOP Cross Wall Showers
THESE PRODUCTS WILL WITHSTAND CHEMICAL AND THERMAL SHOCKS subject to compliance with current protocols.
78
79
TEMPOSOFT 2 Shower
Description
TEMPOSOFT 2 Shower Assembly Kit
TEMPOSOFT 2 Exposed Shower
Wall-mounted, exposed shower assembly with:
NEW
76
TEMPOSOFT 2 shower assembly kit automatic
shut-off shower valve and vandal resistant fixed
shower head and scale-resistant nozzle, with
flow rate set at 6 lpm (at 3 bar).
• Fed by mixed water.
• Shut-off delay ~25 seconds +5/-10.
• Pre-set flow rate, adjustable by the installer.
• 10 year warranty.
747801
- Time flow chrome-plated shower ~25 sec. supplied from
beneath, M1/2", with pre-mixed water.
- Reinforced column and collar Ø 16 (supplied with fixing plate
and screws).
- Vandal proof TONIC-JET fixed shower head with scale-resistant
nozzle, with automatic, ECO flow rate regulator set at 6 lpm.
10°
20° ±
1003
Stopcock union MF1/2" to attach to inlet:
• in-line, for exposed inlet
• right-angled L30mm, for concealed inlet
Advantages
• Soft-touch operation
requires three times less pressure to operate.
• Water saving: 84%
compared to a classic shower 15 lpm.
• High resistance to vandalism and
unequalled endurance.
• Design unique and timeless.
825215
836215
Tamperproof grid
GR
can be used instead of nozzle on models 712..., 714..., or 716...
add GR to the end of the reference (e.g.: 747801GR).
Concentrated jet (Ø 50cm on the ground) recommended for smaller, raised
shower trays.
1/2"
34
747801
Use
• Press the push-button to operate.
• Automatic shut-off delay ~25 seconds.
• Jet created by a scale-proof nozzle.
• Installations for children, the elderly
or disabled people.
• All public facilities subject to intensive use.
> We recommend installing a thermostatic mixing valve upstream of the panel
(see page 99-117) and a floor trap for drainage (see page 89).
1/2"
1/2"
29
Operation
68
OPERATI
FT
SO - TO
Ø 50
H
UC
20
1/2"
1/2"
L
836215
825215
ON
TEMPOSOFT 2 Exposed Shower
Soft-touch Operation
Reliable
Soft-touch system which requires three times
less pressure to operate compared to
a traditional time flow shower => specially
designed for children, the elderly or disabled
people.
• Foolproof mechanism. Designed from materials
that are scale-proof and corrosion proof.
Hydraulic time flow mechanism with selfcleaning calibrated groove.
• Endurance: more than 500,000 operations
(certification NF/CSTB).
• Soft-touch operation and opening.
• Automatic flow rate regulator and adjustable
set (at point of installation).
- Time flow chrome-plated recessed shower ~25 sec., recessed
inlet, M1/2", with satin finish stainless steel wall plate Ø 130
and clamp adjustable from 1 - 5mm.
- Vandal proof fixed shower head with scale-resistant nozzle,
with automatic, ECO flow-regulator 6 lpm.
76
35
1 /2"
1/2"
25 °±10
24
20°±10
• ROUND shower head (709000)
• TONIC-JET shower head (712000)
The nozzle does not require any maintenance
or de-scaling, unlike traditional grid systems.
Design
New design, unique and timeless.
Ø35
1/2”
1/2”
Ø35
Ø130
Minimal Servicing
Ø130
Comfort
27
1/2”
749429
749422
* These valves are not supplied with a water proof recessing box.
The installer must ensure that the recessing area is water proof and any
leaks or condensates can drain (see installation guide).
70
• Automatic flow rate regulator set at 6 lpm.
• Automatic shut-off (~25 seconds).
Recessed shower assembly kit with:
70
80% Water Savings
TEMPOSOFT 2 Recessed Shower*
NEW
1/2”
24,5 24
5 max.
24,5 24
5 max.
Collar to adjust flow rate.
1,10m
M
HW
CW
• Should be supplied with safe, blended water,
we recommend installing a group
thermostatic mixing valve (see pp 99-117).
• Recommended pressure: 1-5 bar.
• If necessary, protect the mechanism with
cartridge filters and pressure reducers.
• Flush the pipework before installation and
commission the showers.
• We recommend a stopcock connector
if the inlet is exposed - DELABIE ref. 825215
or 836215 for recessed inlet.
Maintenance (information available on request).
The cartridge (timing mechanism) is interchangeable.
> We recommend installing a thermostatic mixing valve upstream of the panel
(see page 99-117) and a floor trap for drainage (see page 89).
TEMPOSOFT 2 Recessed Shower
NEW
TEMPOSOFT 2 Shower
Ø48
1/2”
70
Installation (information available on request)
2,10m
MW
749422
749429
If flow rate is too low or too high,
it is possible to adjust the flow rate
on the collar sited on the cartridge.
1/2”
34
54,5
• straight, for in-line supply
• right-angled, for concealed supply
747800
15
34
Time flow, exposed shower valve ~25 sec., M1/2" inlet pre-set
at 9 lpm at 3 bar, adjustable via a collar sited on the cartridge
(see opposite).
747800
748800
48
34,5
1/2”
> We recommend installing a thermostatic mixing valve upstream of the panel
(see pages 99-117) and a floor trap for drainage (see page 89).
1/2”
Ø48
748800
TEMPOSOFT 2 Shower 1/2"
THESE PRODUCTS WILL WITHSTAND CHEMICAL AND THERMAL SHOCKS subject to compliance with current protocols.
80
81
Time Flow Valves for Showers
Time Flow Mixers for Showers
TEMPOMIX Waterproof Recessed Shower
Time flow mixer TEMPOMIX with waterproof recessing box
and chrome-plated brass wall plate 160x220mm featuring:
H 200 x L 259
1/2”
1/2"
83
10-30
Ø48
NEW
70
pre-assembled recessing kit featuring:
790BOX
recessing box, protective cover and hydraulic connector
(to connect to control assembly 790218 or 790218CXL).
control kit featuring:
790218
wall plate, chrome-plated push-button control and valve.
control kit featuring:
790218CXL
wall plate, chrome-plated CXL push-button control and valve.
complete kit
790220
Ø130
Ø35
48
70
34
34,5
1/2”
1/2”
1/2”
24,5 24
Ø48
748800
5 max.
We recommend wall plate ref. 824800 for panels/partition walls see below.
749428
Ø 80
72
3/4"
• adjustable flow rate 15mm for compression fittings 749725
• MM3/4 45 lpm at 0.5 bar, fixed flow rate
749000
Recommended for low pressure applications.
• reinforced wall plate Ø 80 for panels/partition walls 824800
37,5
3/4"
H 200 x L 259
1/2”
749000
824800
10-30
34
747000
62
749…
1/2"
Ø 50
34
AB
28,5
1/2"
748000
1/2"
Ø 50
Ø 195
Time flow valve M3/4" for 2mm panels, automatic shut-off after
~30 sec. Brass body with a rear locking ring. Flow rate 12 lpm,
adjustable by the installer.
• MM3/4"
749770
• FF1/2"
749570
749770
160 x 160
H 108 x L 129
Ø 14
1/2"
790427
• M1/2" F1/2" with adjustable nut
• M3/8" F3/8" with adjustable nut
• 15mm for compression fittings with adjustable nut
825212
20
30
31
3/4"
30
3/4"
H
30
1/2"
3/4"
1/2"
790000
• M1/2" F1/2" L.30 H.29
• M1/2" F3/4" L.30 H.29 ±2mm
Ø 50
Ø 50
790000CXL
29
H
3/4"
45
3/4"
18
3/4"
Ø 80
31
20
838…
790874
874220
Ø 80
824800
824800
THESE PRODUCTS WILL WITHSTAND THERMAL AND CHEMICAL SHOCKS subject to compliance with current protocols.
836...
825015
836015
836020
Elbow union without integrated stopcock
3/4"
31
• with F3/4" right-angled connectors, centres 150
790874
• with M3/4" in-line inlets, centres 90
790000
• 790000 with chrome-plated metal control knob 790000CXL
• for panels 1 - 10mm thick, M3/4"
790970
• for panels 8 - 16mm thick, M3/4"
790975
• reinforced wall plate Ø 80
824800
for installation on panels or dry walls.
825215
825212
825216
Elbow union with integrated stopcock
836020
45
45
3/4"
TEMPOSTOP for Panels
In-line stopcock union, M1/2" F1/2"
825015
Union "stop" in-line, with integrated stopcock
3/8"
1/2"
825015
31
TEMPOSTOP Showers 1/2"
3/8"
1/2"
45
31-53
55-77
747000
747116
747001
748000
748001
TEMPOSTOP Shower for Panels
790927
790927
790925
790427
790425
AB
• straight MM1/2"
• straight 15mm for compression fittings
• straight with Anti-Blocking safety
• angled for concealed supply
• angled, with Anti-Blocking safety
Anti-Blocking safety: valve only operates once the push-button is released.
30-42 28-46
TEMPOMIX Exposed Showers
82
Time flow valve, automatic shut-off after ~15 sec. Chrome- plated
brass body MM1/2". Flow rate 12 lpm, adjustable by the installer.
1/2"
31-43
Time flow mixer ~30 seconds, with temperature control via the
push-button control, and maximum temperature limiter
(adjustable by the installer). Solid brass body with non-return valves
and filters. Flow rate pre-set at 12 lpm, can be adjusted without
shutting off the water supply.
TEMPOSTOP Showers 3/4"
TEMPOSTOP Exposed Showers 1/2"
83
- TEMPOMIX 3/4" single control time flow mixer ~30 seconds in
solid brass with integrated non-return valves and filters (without
stopcocks) for hot water and cold water supply.
Flow rate pre-set at 12 lpm, can be adjusted without shutting off
the water supply.
Temperature control via the push-button control, with maximum
temperature limiter (adjustable by the installer).
- Recessing box (recessing depth adjustable to 20mm).
TEMPOMIX Exposed Showers
Time flow valve for in-line connection M3/4", automatic shut-off
after ~30 sec. Flow rate 12 lpm, adjustable by the installer.
31
Time flow mixer with standard recessing box:
• wall plate Ø 195 no visible screws Ø 14
• wall plate Ø 195 no visible screws Ø 15
• stainless steel wall plate 160x160, connectors Ø 14
• stainless steel wall plate 160x160, connectors Ø 15
for installation on dry walls.
TEMPOSOFT 2 Showers 1/2"
TEMPOSTOP Exposed Showers 3/4"
NEW
pre-assembled recessing kit featuring:
749BOX
recessing box, protective cover and hydraulic connector
(to connect to control assembly 749218 or 790218CXL).
control kit featuring:
749218
wall plate and chrome-plated push-button control.
control kit featuring:
749218CXL
wall plate and chrome-plated CXL push-button control.
complete kit
749220
TEMPOSTOP Recessed Showers
• recessed with st. steel wall plate Ø 130
749428
adjustable spacing/ locking 1-5mm.
• recessed for dry panels 7mm
749870
Rough brass body MM1/2", chrome push-button Ø 35, no wall plate.
• exposed, straight valve
747800
• exposed angled for concealed supply
748800
54,5
1/2”
15
749128
749628
Time flow valve for recessing, shut-off after ~25 sec, inlets MM1/2"
747800
34
• stainless steel wall plate 160x160
749628
• stainless steel wall plate 160x160 15mm for CF* 749625
• stainless steel wall plate Ø 130
749128
• stainless steel wall plate Ø 130 15mm for CF*
749187
• stainless steel wall plate Ø 90 fixed flow rate
747922
Recommended for low pressure applications.
* CF - compression fittings. Other recessing depths available on request.
TEMPOSOFT 2 Showers
1/2”
1/2”
TEMPOMIX Recessed Showers
TEMPOMIX Recessed Showers
749628
790…
- TEMPOSTOP 3/4" time flow valve ~30 seconds in solid brass
with integrated 1/2" stopcock, non-return valve and filter, for
mixed water supply.
790427
1/2"
Ø 130
749128
Time flow valve TEMPOSTOP with waterproof recessing box
with chrome-plated brass wall plate 160x220mm featuring:
790927
160x160
72
72
H 160 x L 220
3/4”
TEMPOSTOP Waterproof Recessed Shower
TEMPOSTOP Waterproof Shower
1/2"
1/2"
37,5
Time flow valve for recessing, automatic shut-off after ~30 sec,
inlets F1/2". Brass body, adjustable flow rate 12 lpm.
23-29
H 160 x L 220
TEMPOMIX Waterproof Shower
31
31
- TEMPOMIX 3/4" single control, time flow mixer ~30 seconds in
solid brass with integrated 1/2" stopcocks, non-return valves and
filters, for hot water and cold water supply.
Flow rate pre-set at 12 lpm, can be adjusted without shutting off
the water supply.
Temperature control via the push-button control, with maximum
temperature limiter (can be adjusted by the installer).
- Recessing box (recessing depth adjustable from 10 - 30mm). See p.78.
- Chrome-plated wall plate 160x200mm, vandal proof with hidden
fixings.
TEMPOSTOP Recessed Shower
22 - 45
NEW
• M1/2" F1/2" L.30 H.27
• M1/2" F3/4" L.30 H.29
• FF3/4" captive nut (2 pieces)
874220.2P
824800
Reinforced fixing plate for secure fixings (4 screws)
• F 12/150
• F 1/2"
838...
838015
838020
874220.2P
824800
824815
CONNECTORS
THESE PRODUCTS WILL WITHSTAND CHEMICAL AND THERMAL SHOCKS subject to compliance with current protocols.
> We recommend installing a thermostatic mixing valve to provide safe, temperature controlled water (see page 99-117) and a floor trap for drainage (see page 89).
83
Scale-proof Shower Heads
Scale-proof Shower Heads
TONIC-JET
Description
76
76
Vandal resistant fixed shower head with scaleproof nozzle and tamperproof fixing.
• Chrome-plated solid brass body.
• Spray angle can be adjusted on installation.
• Automatic ECO flow rate regulator set at 6 lpm.
Vandal resistant, scale-proof fixed shower head.
Chrome-plated solid brass body with vandal proof fixing.
- Scale-proof nozzle with adjustable spray angle.
- Automatic ECO flow rate restrictor set at 6 lpm.
1 /2"
20°±10
20° ± 10
712000
76
Vandal Resistant
964
1 /2"
Automatic ECO flow rate regulator set
at 6 lpm.
712020
7
20°±10
• Vandal resistant rain-effect grid
GR
replaces the shower head nozzle for showers 712..., 714..., or 716...
Add GR to the end of the reference (e.g.: 712000GR)
76
1 /2"
F 3/4"
20°±10
Comfort
The automatic flow rate regulator ensures the
same quantity of water is delivered to each
shower, from the first to the last.
The spray angle can be adjusted on installation.
See the Secure Sector collection pages 46-53 and 90-97.
L
76
1 /2"
712200
Hygiene and Minimal Servicing
20°±10
TONIC-JET Shower Head
The nozzle does not need to be de-scaled, in
contrast to shower heads with grids. The lack
of water retention reduces the proliferation
of bacteria.
27
ROUND
35
Vandal resistant, scale-proof fixed shower head.
Chrome-plated solid brass body with vandal proof fixing.
25 °±10
24
20° ±10
Vandal proof:
it is possible to lock the
nozzle at the desired angle.
Traditional shower head
35
Ø60
Ø21
25
1/2"
SAVING
37
The TONIC-JET and GYM shower heads have
a flow rate set at 6 lpm regardless of the water
pressure. Water storage, the capacity of the
group mixing valve and the pipework can be
reduced. Flow rate calculations are simplified.
(See Technical Chapter: Calculating the
Pipework page 157).
The spray angle can be adjusted
during installation.
- Scale-proof nozzle with adjustable spray angle.
- Automatic ECO flow rate restrictor set at 6 lpm.
709000
n
200
18,5
• for concealed inlets, M1/2"
• for panels 1-10mm, M1/2"
709000
709010
• cross wall, for walls 1-150mm*, M1/2"
• cross wall, for walls 1-200mm*, M1/2"
709150
709200
* Other lengths available on request.
22
22° ±10°
709200
See the Secure Sector collection pages 46-53 and 90-97.
ROUND Shower Head
Recommended pressure: 1 - 5 bar.
Limit the pressure for user comfort.
GYM
716000
Vandal resistant, ceiling-mounted fixed shower head, F1/2".
Chrome-plated solid brass body with vandal proof fixing.
1 /2"
For additional comfort, a rain-effect shower
head can be selected, GR grid shower head or
scale-proof GYM COMFORT.
47
Ø 29
Installation advice: install the shower tray
~10cm from the wall to ensure the capture of
all the spray. We recommend built-in shower
trays or sloping gutters rather than raised small
shower trays. For the latter we recommend
the GR grid alternative (see opposite).
Rain-effect spray (Ø 50cm on the floor) recommended for small, raised
shower trays.
712000GR
1/2"
Calculating the Hot Water
Requirements
712150
712200
* Other lengths available on request
30
Vandal proof installation:
fixed in place using grub screws.
• cross wall, for walls 1-150mm*, M1/2"
• cross wall, for walls 1-200mm*, M1/2"
712010
Water savings over 80%
The shower spray is formed by pulverisation.
The nozzle is a diffuser without grid. It will not
scale up or clog up (DELABIE patented).
712000
712010
ø 16
Specifically designed for intensive use in public
and commercial places.
• Locked in place with stainless steel screws.
• Vandal resistant, scale-proof nozzle.
Principle
• for concealed inlets, M1/2"
• for panels 1-10mm, M1/2"
Ø 42
- Scale-proof nozzle with adjustable spray angle.
- Automatic ECO flow rate restrictor set at 6 lpm.
±10°
716000
Wall
mounted
GYM Shower Head
Ø 40
SHOWER ARM chrome-plated brass MM1/2".
1 /2"
20°±10
1 /2"
10
30
97
710000
25°
Adjustable, scale-proof shower heads.
80,5
73,5
Ø 46
± 25°
1,10m
711000
710000
GYM COMFORT
1 /2"
1 /2"
2,10m
• L.95
• F1/2" Ø 46
• EXTRA F1/2" Ø 68
711000
711002
Ø 68
± 25°
711002
Slope 5%
Slope 10%
Flow rate regulator MF1/2".
• 6 lpm (pack of 5)
• 10 lpm (pack of 5)
927005.5P
927015.5P
927015
0,80m
0,10m
0,80m
0
GYM COMFORT Shower Head
THESE PRODUCTS WILL WITHSTAND CHEMICAL AND THERMAL SHOCKS subject to compliance with current protocols.
84
85
High Specification Shower Heads
1/2’’BSP(F)
F1/2"
CEILING MOUNTED SHOWER HEAD 1/2"BSP(F)
Comfort Drench shower set
1/2’’BSP(F)
715000
715120
320
41
15
715000
1/2"BSP (M)
715120
FLOW-RATE RESTRICTORS 1/2"BSP(MF)
• 5 to 6 lpm (5 pieces)
• 10 lpm (5 pieces)
Ø55
Ø220
47
Ø25
ø 120
207200LR
High performance Comfort Drench shower head 200mm dia.
with 300mm shower arm. 1/2’’BSP(M) recessed drench shower.
• drencher shower arm only
207220
79
• chrome plated, Ø 85
• chrome plated, Ø 120
Shower Heads & Shower Kits
• comfort Drench shower head only
207200
1/2’’BSP(F)
927005.5P
927015.5P
25°
25°
COMFORT DRENCH
1/2’’BSP(M)
FLEXIBLE SHOWER sets & kits
927015
Douglas Delabie provide an extensive range of flexible shower
kits with varying spray patterns
GYM COMFORT
- 1/2’’BSP(F) hose connections to the outlet port on the shower
valve and hand set.
COMFORT SHOWER SETS
• streamline shower kit with 1.5m flexible hose
207007
3 spray patterns: full, focus and combined.
Chrome Rail 25 dia; height 520mm.
Squeeze and slide‘ height and ratchet angular adjustment.
Scale resistant cassette.
For exposed or recessed applications.
Comfort 2-3 Mode (full, focus and combined spray patterns)
- Recommended pressures 0.2 to 3.0 bar.
- 30° angle movement c/w flow regulator 8.5 L/min (use on high
pressure).
- Brass, chrome plated.
- Chrome riser tube not included
207023DR
207007
• 207007 with 1 m slide bar rail and 2m flexible hose 207007A
for people with disability. Chrome Rail 25 dia; height 965mm.
A pull cord facility is incorporated to enable users to lower the
height of the shower head.
70
• comfort 2-3 shower set - Recessed
207023DR
complete with Deluxe shower arm, 1/2"BSP(M) bottom entry.
• comfort 2-3 shower set - Exposed
207023FE
complete with FE shower arm,15mm bottom entry.
90
208023
207015
Comfort 3-5 Mode (5 spray patterns available)
- Recommended pressures 1.0 to 3.0 bar.
- 30° angle movement c/w flow regulator 8.5 L/min.
- Brass, chrome plated.
- Chrome riser tube not included
207035FE
• contract shower kit with 1.5m flexible hose
207015
Single mode shower pattern. Chrome Rail 25 dia; height 530mm.
Squeeze and slide‘ height and ratchet angular adjustment.
Scale resistant cassette.
Shower heads with flexible
• heavy duty 2 spray patterns; Chrome / White
207001
Chrome Rail 22 dia; height 575mm. Hose length 1.5m
• comfort 3-5 Shower set - Recessed
207035DR
complete with Deluxe shower arm, 1/2"BSP(M) bottom entry.
• comfort 3-5 Shower set - Exposed
207035FE
complete with FE Shower arm, 15mm bottom entry.
• standard Dual mode
207002
Chrome Rail 22 dia; height 575mm. Hose length 1.5m
Comfort shower head only
• chrome wall outlet 1/2"BSP(M)
• comfort 2-3 shower head only, chrome
• comfort 3-5 shower head only, chrome
• standard multi mode
207004
Chrome Rail 22 dia; height 575mm. Hose length 1.5m
207010
208023
208035
SHOWER KIT 207007
41
SOAP DISH wall mounted
62
160
COMFORT Shower Sets
Rust proof and resistant model. Concealed fixing.
• matt finishing
• bright finishing
SHOWER ARMS ONLY
710500
710501
710500
- Back or bottom entry
- Chrome plated brass
710501
• deluxe shower arm chrome - back entry
1/2’’BSP(F).
208007
• FR Shower arm chrome - back entry
1/2’’BSP(F).
208000
Ø60
M1/2"
33
1/2’’BSP(M)
M1/2"
1/2’’BSP(M)
• FR Shower arm chrome - back entry
with 160mm nippling rod, 1/2’’BSP(M).
208020
• FE Shower arm chrome - bottom entry
15mm compression.
208001
SOAP DISH
153
THESE PRODUCTS WILL WITHSTAND CHEMICAL AND THERMAL SHOCKS subject to compliance with current protocols.
208000
COMFORT Shower Arms
THESE PRODUCTS WILL WITHSTAND CHEMICAL AND THERMAL SHOCKS subject to compliance with current protocols.
86
87
Shower Heads with Grids
Vandal Resistant Rain-effect Grid
Floor Traps
Adjustable Height Floor Traps
GR
150x150
108,5
Ø 165
Ø 40
Ø 165
108,5
2,10m
Rain-effect spray (Ø 50cm on the floor) recommended for small, raised
shower trays.
with vandal resistant stainless steel grid (withstands detergents)
fixed by 2 stainless steel screws.
13 - 80
Max. 85
replaces the shower head nozzle for showers 712..., 714..., or 716...
Add GR to the end of the reference (e.g.: 712000GR).
100 x 100
Ø 40
100
150
0,50 m
0,50 m
GR Grid
683001
47
18 - 85
25
38
19°
Shower head with 5 ring spray plate, grub screw
• wall-mounted shower head with grid
• through-the-wall 1-185mm thick
• through-the-wall 1-235mm thick
• for panel 1-25mm thick
64000
64185
64200
64Q40
185 maxi
1/2"
Ø 121
54
Ø
11
683002
52
683002
1/2"
47
683002
682001
19°
64200
682001
> Horizontal or vertical outlet integrated into the height of the floor trap:
significant savings for height and all dimensions.
> Adjustable height: easy to install even where there are differences in
floor levels.
> Integrated waterproof plate to seal the waterproof membrane.
> Heat proof: 60°C continuous / 85°C peak.
> Plunger with handle: easy to grip and easy to clean.
> Smooth PVC body: prevents the build-up of impurities.
Ø 40
4
Wall-mounted, Shower Head with Rotating Nozzle 646000
for use with any shower head, M1/2".
Fixed in place with a grub screw.
683001
683001
Ø 165
108,5
64000
For tiled or concrete floors
• 150x150, polished stainless steel grid
height adjustable up to 85mm (with extension).
• 100x100, polished stainless steel grid
height adjustable up to 80mm (with extension).
For vinyl floors
• Ø 115, polished stainless steel grid
height adjustable up to 85mm (with extension).
Ø 175
1/2"
Anti-vandal fixed shower head M1/2".
Chrome-plated brass body, vandal proof fixing.
646000
682001
52
Wall-mounted Shower Heads with Grids
64000
100
150
1,10m
- Water level 50mm and flow rate 36 lpm.
- Vertical outlet Ø 40.
- PVC body, classified as non-flammable (American certification UL94).
1/2"
25
683001
19°
grid
Wall-mounted Shower Heads
683002
85 max
vertical outlet dia 40,
or horizontal outlet
with elbow joint (not
supplied) FF dia 40
Concrete
layer
40
Ø 40
�
1/2"
88CH5
26
88CH5
88MP5
88MP3
715000
Soft/vinyl
Flange floor
Adjustable
extension
1/2"
• with 5 rings, chrome-plated brass
• with 5 rings, black Makrolon
• with 3 rings, black Makrolon
• chrome-plated with large rim, Ø 85
Grid
Plate
646000
Ceiling-mounted Shower Heads F1/2"
88CH5
Concrete or
tiled
tiles floor
�
Ø 28
88MP3
•
Flow-rate Restrictors 1/2"BSP(MF)
28 to 85mm
with extension
715000
•
683001
�
�
�
Watertight plate
1/2’’BSP(F)
•
Vertical outlet
1/2’’BSP(M)
Add an elbow
for horizontal outlet
•
•
•
927015
683001
(See also scale-proof shower heads page 85).
TEMPOSTOP Safety Shower
31
3/4"
Floor Trap with Grid 140x140
2,5
75
749080
• MM 1"1/4, flow rate 130 lpm at 3 bar
760580
• Reinforced wall plate Ø 80
recommended for installation on panels or dry walls.
824800
Stainless steel grid.
Adjustable extension.
Trap body with integrated flange
to seal the water proof
membrane.
Floor Trap with Adjustable Height
684000
Ø
Ø 80
24,5
3/4"
• MM3/4", flow rate 75 lpm at 3 bar
683002
in polished stainless steel, fixed by stainless steel screw.
72
time flow valve with push-button disc.
Chrome-plated brass body. Push-button disc Ø 80.
Time flow ~30 seconds. Flow rate can not be adjusted.
In-line connectors.
682001
Ø 40
140
749080
• Water level 20mm and flow rate 18 lpm.
• Vertical outlet Ø 40 (add an elbow for horizontal outlets).
• PVC bell.
140
Ceiling-mounted Shower Heads
5 to 30mm
without extension
•
927005.5P
927015.5P
•
• 5 to 6 lpm (5 pieces)
• 10 lpm (5 pieces)
�
Grid support
with adjustable height
88MP3
Ø 80
684000
TEMPOSTOP Disc-operated
824800
THESE PRODUCTS WILL WITHSTAND THERMAL AND CHEMICAL SHOCKS subject to compliance with current protocols.
88
Fixed Height Floor Trap
THESE PRODUCTS WILL WITHSTAND CHEMICAL AND THERMAL SHOCKS subject to compliance with current protocols.
89
Secure Sector Control Solutions Introduction
Secure Sector
Mechanical & Electronic Controls
192
THERMOSTATIC HEADER MANIFOLD
VANDAL RESISTANT AND SUPERIOR ENDURANCE
90
Some public and commercial places remain extremely susceptible to vandalism through deliberate or involuntary damage.
DOUGLAS DELABIE offer a complete solution to these problems, especially in prisons, hostels for the homeless, rest areas and service stations, etc.
Thermostatic header manifold assembly for installation in service
ducts comprising:
90
- Economix 22/3 Combi TMV3 approved thermostatic mixing valve
to provide safe, temperature controlled hot water.
- Inlets: 22mm push fit for Cold & Hot Water supply and 15mm
for Non-Potable (Optional) with isolating and WRAS approved
double check valves.
- Outlets: 15mm JG push fit in banks of 2 or 4 conn. manifold for
Cold, safe anti-scald Hot & Non-Potable water supply.
- Ergonomic designs prevent unwanted removal and reduce the risk
of hanging.
- Control knobs cannot be unscrewed or removed by the user.
- Installation in service shaft: no access by the user.
• Hard Wearing for Intensive Use:
- Robust designed to withstand intensive use.
- Shock proof mechanisms: endurance tested for several hundred
thousand operations.
50
• Vandal Resistant:
• Secure and Easy Maintenance:
35
Installation in service ducts allows servicing and maintenance without
user contact (e.g. prisoners).
130
155
TMVMAN4-4
• Anti-blocking Safety: AB
- “AB” systems prevent deliberate flooding (TEMPOSTOP/SECUREFLOW
time flow controls).
- Possibility of isolating water supply in case of excessive use
(TEMPOMATIC through-the-wall or multifunction below).
• 4 HW, 4 CW outlets
• 2 HW, 2 CW outlets
• 2 HW, 2 CW, 2 non-potable outlets
FLOW
(COLD)
FLOW
(HOT)
TMVMAN4-4Mk3
TMVMAN2-2Mk3
TMVMAN2-2-2Mk3
For specific solutions, please contact the Technical Sales Team.
THROUGH-THE-WALL TIME FLOW OR ELECTRONIC CONTROL
TEMPOMATIC Individual Shower
12Vca
Vandal Resistant
Installation
• Control knob and spout in chrome-plated
brass.
• Anti-rotating pins on the control pushbutton as well as the spout, lock the
installation in place (cannot be unscrewed).
• Joining nut
- the wall-mounted control supports the tap.
- in-line activation when pressing the tap, via
the control rod.
• Shock proof push-button: protects the
mechanism from abuse.
The assembly for through-the-wall installation using a service shaft includes:
- 1 vandal proof control (or sensor) with threaded rod for through-the-wall installation.
- 1 vandal proof fixed spout with threaded rod for through-the-wall installation.
Header Manifold
452150
Control via presence detection, featuring:
- Through-the-wall sensor for walls 1 - 150mm*
- Electronic control unit with 1/2" solenoid valve.
- 230/12 V Transformer.
- Adjustable time flow from 30-60 seconds.
1/2"
* Other through-the-wall lengths available on request.
The threaded rod that goes through the wall can be cut to the desired length. Flexible hoses
can be easily connected to deliver the water supply.
Shower head not included, for selection see pages 84-87.
230Vca
452150
TEMPOMIX Cross Wall
1 - 220
76
TEMPOMIX Cross Wall Showers
Vandal proof shower kit for through-the-wall installation, with:
1/2”
Ø 20,5
- Through-the-wall control for walls from 170 or 220mm with
single control M3/4", time flow mixer ~30 seconds in solid brass,
with integrated non-return valves and filters.
- Vandal proof fixed shower head M1/2" with scale-proof nozzle
and automatic ECO flow rate regulator set at 6 lpm for throughthe-wall installations from 170 or 220mm.
796202
Anti-rotating pin
Control push-button and spout
are fixed into the wall. They cannot
be unscrewed or removed.
3/4”
Ø 20,5
Ø 70
45
Joining nut
31
3/4”
Ø 50
31
132
1 - 220
53
1 - 220
1/2”
35
ø 20,5
796209
INNOVATION, FUNCTIONALITY AND COST EFFECTIVENESS
3/4”
ø 20,5
ø 70
• for walls from 170mm, TONIC-JET shower head
• for walls from 220mm, TONIC-JET shower head
796152
796202
See recessed version with water proof recessing box page 82.
3/4”
ø 50
31
132
1 - 220
TEMPOSTOP Cross Wall
53
1-200
TEMPOSTOP Cross Wall Showers
76
Vandal proof shower kit for through-the-wall installation, with:
DOUGLAS DELABIE is driven by innovation and a determination to develop state-of-the-art water
control products that meet or exceed the exacting demands of today’s commercial environment.
We have the largest range of high quality anti-ligature water control products that not only reduce
incidents of self-harm and vandalism, they deliver long term water savings reducing water
consumption, protect the environment and reduce the spread of cross-contamination infections.
796159
796209
45
These are some of the reasons why DOUGLAS DELABIE is a market leading manufacturer in the
commercial sanitary fittings industry and a preferred supplier to the prison, secure sector and mental
health sectors.
31
• for walls from 170mm, ROUND shower head
• for walls from 220mm, ROUND shower head
1/2”
Ø 20,5
1/2”
- Through-the-wall control for walls from 150 or 200mm with M1/2"
time flow valve ~30 seconds in solid brass, for supply with mixed
water.
- Vandal proof fixed shower head M1/2" with scale-proof nozzle
and automatic ECO flow rate regulator set at 6 lpm for throughthe-wall installations from 150 or 200mm.
Ø 20,5
Ø 50
1/2”
75 min.
1-200
28
749212
Our range includes
• Electronic controls with optional electrical interlock security.
• Pneumatic controls anti-block time flow.
• Non-Concussive time flow controls, including anti block options.
1-200
AB
1/2”
Ø 20,5
Ø 20,5
1/2”
All our fittings are designed with durability and robustness in mind, with a hard-wearing chromeplated or stainless steel finish that resists damage. Their reinforced fixings and shock-proof mechanisms
can stand up to 500,000 operations and have a host of increased safety features, such as recessed
ligature-free fixings and anti-blocking devices, which only allow taps to work after the push-button
is released.
76
Ø 50
AB
1/2”
75 min.
1-200
28
749152
749212
747213
• for walls 1-150mm, ROUND shower head
• for walls 1-200mm, ROUND shower head
• for walls 1-200mm, ROUND shower head
with Anti-Blocking safety, time flow 15 seconds
749159
749219
747214
749219
• Back-nut with 3 screws (reinforcing plate behind the partition) 826315
826315
Other lengths available on request.
90
• for walls 1-150mm, TONIC-JET shower head
• for walls 1-200mm, TONIC-JET shower head
• for walls 1-200mm, TONIC-JET shower head
with Anti-Blocking safety, time flow 15 seconds
> Please contact us for other solutions specifically designed for prisons.
> We recommend installing a thermostatic mixing valve upstream of the panel
(see pages 99-117) and a floor trap for drainage (see page 78).
TEMPOMATIC Cross Wall
91
Secure Sector
Electronic Controls
Secure Sector Solutions
Description
• 4-Way Electronic control unit 230/12V
441452/SEC001
to connect up to 4 solenoid valves and through-the-wall controls.
138
122
• 8-Way Electronic control unit 230/12V
441453/SEC008
to connect up to 8 solenoid valves and through-the-wall controls.
152
441452
4000
167 max.
Advantages
Operation
Uses
Touch pad or infra-red controls open a monostable
12V solenoid valve for a pre-determined period
of time dependent on link-pin position of the
connector for each point-of-use. 7 or 15 seconds
for washbasins, 30 or 45 seconds for showers, etc.
• The secure sector or installations that have high
levels of vandalism.
• Recommended for prisons, detention centres,
army barracks, mental health units etc.
Installation (information on request)
• The cost of the multifunction assembly for
4 or 8 points-of-use is lower than cost of
electronic taps with independent control units.
Install one control unit for 4 or 8 points-of-use,
instead of 4 or 8 separate control units.
• Multifunction control offers total flexibility:
e.g. complete run of 8 washbasins or WCs,
or total washroom control including
2 basins with hot and cold water supply, dual
flush WC and 1 shower, etc.
Vandal Resistant
• Chrome-plated brass plate and control knob
are flush to the wall.
• Installation in service shaft.
Anti-Blocking Security
AB
• Security mode-ON
User operation more than 4 times in 10 minutes
or 10 times in less than 30 minutes on any
point-of-use will prevent further use for
30 minutes, preventing mis-use or waste.
Other points-of-use are not affected.
NB: Security mode is valid for all points-of-use
but can be de-activated if required.
92
4000
• touch-pad control, cross wall with 4m cable
• non-branded touch pad control 165mm cable
• infra-red control, cross wall with 4m cable
• 1/2” solenoid valve with 4m cable (6V)
for washbasin, shower or urinal.
441452TCP
441452SR
441452DET
495626CEB
Ø 60
WC control
495626CEB
• WC touch-pad dual flush, c’wall with 4m cable
• WC infra-red control, cross wall with 4m cable
• direct flush 1”BSP solenoid valve, 4m cable (6V)
for WC direct flush valve.
441452SRM
441452DEM
461035CEB
4000
Colour-coded markers
461035CEB
• blue disc CW Tempomatic cross wall control
• red disc HW Tempomatic cross wall control
441452B
441452R
For details of our control sets see page 94.
TEMPOMATIC Multifunction
Investment Savings
Various Combinations
Individual Control Units
Cross wall control for walls up to 165mm thick with chromeplated wall plate Ø 50/15 and 4m cable with quick-fit connectors.
Washbasin, shower or urinal control
441452TCP
• Vandal resistant: chrome-plated brass wall
plate and control flush to the wall; installation in
service shaft.
• The cost of the multifunction assembly for 4
or 8 points-of-use is lower than the cost of
electronic taps with independent control units.
• Douglas Delabie's electronic time flow control
system achieves optimum BREEAM ratings.
4
Ø 24
Ø 21
An integrated 4-way or 8-way multifunction
electronic control unit to supply separate points-of-use
simultaneously.
• Electronic control unit IP65 for recessing in
a service duct.
• Anti-blocking security prevents abuse or waste.
NB: can be deactivated if necessary.
• Dual flush option.
• Time flow control selectable for each point-of-use:
7, 15, 30 or 45 seconds.
• 3 year warranty.
TEMPOMATIC Multifunction for 4 or 8 points-of-use
to supply separate points-of-use simultaneously.
168
• Simple wiring: the solenoid valve cables and
push-button controls are supplied with quick
fit/release connectors. Control boxes have an
integral transformer 230/12V and should be
protected by a circuit breaker.
• Time flow control for each point-of-use by
positioning the connectors for each point-of-use:
7, 15, 30 or 45 seconds depending on use
(adjustments on the mother board).
Electrical supply:
• Protect with a 220V/4AT fuse.
• Minimum consumption: 2VA maximum 36VA
intermittent.
Security:
Protect the installation with a differential circuit
breaker.
93
Secure Sector
Electronic Controls
Shower Control Set
Secure Sector
Additional Fittings
SSH00601
TEMPOSTOP Through-the-wall
45
Anti-ligature touch-pad controls for time flow,
through-the-wall shower valves.
50,5
20max
Through-the-wall shower control
30,5
- Vandal proof through-the-wall control.
- Delivered with grey indicator (blue or red on request).
3/4’’BSP(F)
3/4”
150
Ø 33
• through-the-wall 20mm
• through-the-wall 150mm
• through-the-wall 200mm
• through-the-wall 250mm
• through-the-wall 290mm
• through-the-wall 400mm
741023
495626SH
25
50
203
30,5
24
Ø 33
3/4’’BSP(F)
F 3/4”
4000
167 max.
Ø 21
M 1/2”
4
741023
741153
741203
741253
741303
741403
Ø 50
Ø 60
Ø 24
Ø 21
Ø 60
See (page 85) for anti-ligature wall or ceiling shower head options.
Ø 21 Ø 50
M 1/2”
Ø 60
18
- Automatic shut-off after ~30 or 45 seconds.
- Flow rate preset at 8 lpm at 3 bar. Other flow rates available.
- Vandal proof, through-the-wall mounting for walls ≤ 165mm.
- Durable high chrome/stainless steel finish.
- Includes: 4m connection cable (6V); flow regulating ball valve
assembly at 8 lpm.
- Includes valve 495626SH and control 441452TCP.
741203
441452TCP
TEMPOSTOP Shower Control
Shower Control
4
30°
Recessed self closing valve
49
30
Ø15,2
15mm
M 1/2"
- Automatic shut-off delay ~30 sec. nom ±5.
Touch-pad or infra-red controls in anti-ligature housing
M 12x1,5
95
45
for time flow, through-the-wall taps.
Prefabricated Control sets supplied complete with flow control
devices and push fit connectors for use with the Tempomatic Multi
4 or 8 channel control.
• Washbasin Infra-red Control set (single unit)
Ø15,2
150
749146
15mm for compression fittings
with standard mechanism
749146
1/2’’ BSP(M)
with standard mechanism
749142
TEMPOSTOP through-the-wall
495626WB
1/2"
1/2’’BSP(M)
185
235maxi
maxi
54
THROUGH-THE-WALL Shower Head with grids
Anti vandal fixed shower head.
Chrome plated brass body, vandal-proof fixing.
4000
167 max.
Ø 60
SWB002
19°
4
Ø 24
Ø 21
• Washbasin Touch-pad Control set (single unit)
includes valve 495626WB and control 441452TCP.
15mm
M 1/2"
°
30
- Automatic shut-off after ~15 seconds.
- Flow rate pre-set at 6 lpm at 3 bar. Other flow rates available.
- Vandal proof, through-the-wall mounting for walls ≤ 165mm.
- Durable high chrome/stainless steel finish.
- Includes: 4m connection cable (6V); flow regulating ball valve
assembly at 6 lpm.
3/4’’BSP(M)
M
3/4"
64200
1/2’’BSP(M)
M 1/2"
441452TCP
25
maxi
Shower head with 5 ring spray plate, grub screw.
54
• through-the-wall 1-185mm thick
• through-the-wall 1-235mm thick
• for panels 1-25mm thick
SWB002IR
Basin Control
19
64185
64200
64Q40
64Q40
ANTI-VANDAL SHOWER HEAD
WC Control Set
35
Ø60
4
441452...
Ø21
25
Ø 60
1/2’’BSP(M)
1/2"
37
167 max.
Ø 24
- Dual Flush at 6 L / 3 L and Single flush control at 6 L.
- Vandal proof, through-the-wall mounting for walls ≤ 165mm.
- 4m connection cable (6V).
ROUND Through-the-wall Shower Head
4000
Ø 21
Touch-pad or infra-red controls in anti-ligature housing for time
flow controlled dual or single flush control of Electronic WC cisterns.
For use with Tempomatic Multi 4 or 8-way control.
18,5
150
22
22° ±10°
709150
• WC Touch-pad Control set for cisterns, dual flush
SWD005
• WC Infra-red Control set for cisterns, dual flush
SWD025IR
• WC Touch-pad Control set for cisterns, single flush SWS004
Dual flush control: Full 6 L / Rinse 3 L.
Press / present for 0.5 seconds to rinse; hold 1 second for full flush.
WC Flush Valve Control Set
• WC Touch-pad Control set c/with direct flush valve SWE006
• WC Infra-red Control set c/with direct flush valve SWE026IR
• WC Infra-red Control set c/w direct flush valve, dual flush SWE006DF
Dual flush control: Full 6 L / Rinse 3 L.
Press / present for 0.5 seconds to rinse; hold 1 second for full flush.
Complete with direct flush valve 463SRH.
94
• through-the-wall 1-150mm thick*
• through-the-wall 1-200mm thick*
* other lengths available on request.
709150
709200
F1"
ROUND HEAD
TONIC-JET Through-the-wall Shower Head
109
1/2’’BSP(M)
1 /2"
L
712150
76
20°±10
Vandal and scale-proof fixed shower head.
Body in chrome plated brass, vandal-proof fixing.
- Scale-proof nozzle and adjustable spray angle (lockable) .
- Automatic ECO flow-regulator set at 6lpm (minimum 0.8 bar).
Ø32
• through the wall 1-150mm thick
• through the wall 1-200mm thick
463SRH
712150
712200
SPRAY GRID
GR
WC Flush Valve Control
- Scale-proof nozzle and adjustable spray angle (lockable).
- Automatic ECO flow-regulator set at 6lpm (minimum 0.8 bar).
SPRAY GRID
GR
Replaces the scale-proof shower nozzle, concentrated soft spray
(Ø 50 cm to the ground).
Recommended for small shower trays.
Add "GR" at the reference end (ex. 709150 GR).
GR
280
Electronic WC Cisterns
• Electronic WC cisterns, dual or single flush
SWC003L
left hand inlet, dimensions W 336, H 320, D 140mm
• Electronic WC cisterns, dual or single flush
SWC003R
right hand inlet, dimensions W 336, H 320, D 140mm
Anti-vandal and scale-proof fixed shower head.
Chrome plated brass body, vandal-proof fixing.
GR
Replaces the scale-proof shower nozzle, concentrated soft spray
(Ø 50 cm to the ground).
Recommended for small shower trays.
Add "GR" at the reference end (ex. 712150 GR).
TONIC-JET HEAD
95
Secure Sector - Pneumatic Controls
Secure Sector - Pneumatic Controls
SECUREFLOWTM Shower Control Set
Description
Through-the-wall control for vandal proof washbasins.
Secureflow™ basin control is a pneumatic based
control and operates on a ‘dry’ system-using air
instead of water to activate the timed flow.
3 year warranty.
• Opens by pressing the push-button
• Anti-blocking safety: AB
Vandal-proof mechanism prevents the tap
being blocked on.
Flow commences on release of the button
(prevents intentional flooding and water
wastage).
• Automatic shut-off delay 5-secs to 5-mins
without hand contact. With Secureflow™,
air is pushed over a diaphragm, which opens
a small needle valve, which can be adjusted,
at commissioning, to increase or decrease
the time flow, between 5 seconds and
5 minutes. Typical time settings:
- wash basins: 10-15 seconds.
- showers: 30-45 seconds.
60
20
755200SH
We recommend a thermostatic mixing valve to provide safe, temperature
controlled hot water.
• Vandal Resistant
Specifically designed to withstand the most
hostile environments.
- Anti-blocking mechanism prevents the tap
being blocked on: flow commences only
after releasing the push-button.
- No ligature points.
- Strength: push-button made from vandal
proof stainless steel (ensuring safe effective
water flow whatever the application).
• Reliable Mechanism: Secureflow’s ‘dry’
system using air instead of water to activate
the timed flow eliminates the problems
associated with lime scale deposits and other
water impurities.
• Water Saving
- Automatic shut-off: timing adjustable from
5- seconds to 5-minutes.
Installation
- Optional limited flow-rate: Secureflow
• Water supply: 0.3 to 3 bar. Max. pressure: 10 bar.
is available with add on combined flow
• Balances CW and HW pressures (ΔP < 1 bar).
regulator / filter to maximise the saving.
• Maximum hot water supply 46 °C.
• Comfort: smooth opening and automatic
• Maximum air tube length: 3 metres.
shut-off.
• Connections: 1/2’’BSP(F).
AB
AB
50.0
er
Ø35
41
20
755200WB
AB
ith
fi
w
- Vandal proof, through-the-wall mounting for walls <= 175mm
or <= 125mm.
- Anti-ligature fittings in stainless steel with laser-etched finish.
Dual flush control set: rinse 3 L, full flush 6 L c/with cistern.
755200WCDF
• cross wall 200mm, for walls ≤ 175mm
• cross wall 150mm, for walls ≤ 125mm
80
10.0
• cross wall 200mm, for walls ≤ 175mm
• cross wall 150mm, for walls ≤ 125mm
52
0.1
0.5
1
2
5
8
10
P Bar
SECUREFLOWTM Through-the-wall Basin Control
59
AB
750040
750100
750200
750250
Thermostatic header manifold assembly for installation in service
ducts comprising:
50
35
46
130
155
41.25 DIA
TMVMAN4-4
60.0 DIA
34.4 DIA
Clearance Hole
The use of isolating ball valve strainers is recommended with this valve.
FLOW
(COLD)
1.8
25
35
15
A
SECUREFLOWTM
96
Secureflow™ complete with air solenoid
and diaphragm actuator.
Wall dimension A=40,100,150 and 200 mm
Material: Stainless Steel and DZR Brass
All dimensions shown in mm
Anti-ligature Shower
THERMOSTATIC Header Manifold
750...
50
AB
• cross wall 40 for wall thickness up to 15mm
• cross wall 100 for wall thickness up to 75mm
• cross wall 200 for wall thickness up to 175mm
• cross wall 250 for wall thickness up to 225mm
192
56
90
AB
We recommend a thermostatic mixing valve to provide safe, temperature
controlled hot water.
90
AB
CSH320
with stainless steel finish
• wall-mounted shower head, cross wall ≤ 200mm
64200
• wall-mounted shower head, cross wall ≤ 185mm
64185
• shower head for panels 1-25mm
64Q40
with chrome-plated brass body.
Please contact our Technical Sales Team for customised recessing
options.
CSH320
Ø140
- Timing adjustable from 5 seconds to 5 minutes.
(Recommended for basin: 10 to 15 secs., for shower: 30 to 45 secs).
- Optional flow rate regulator.
- 1/2’’BSP(F) with Anti-Blocking safety.
- Push button in stainless steel and body in DZR brass. Diaphragm
in EPDM rubber.
SecureflowTM Flush Control
Vandal proof, anti-ligature shower for use in the secure sector.
Ceiling-mtd shower head, cover plate Ø140mm
• Anti-blocking safety.
• Anti-ligature.
Anti-vandal time flow control system complete with air solenoid
and diaphragm actuator.
755200WC
755150WC
ANTI-LIGATURE Shower
1/2” BSP
Vandal-proof Button
5.0
755200WCDF
755150WCDF
Single flush control set at 6 L c/with cistern.
75
135
We recommend installing a thermostatic
mixing valve to provide safe, temperature
controlled hot water.
20.0
SecureflowTM Basin Control
Push-button controls in anti-ligature housing for time flow
controlled dual or single flush valves c/with cisterns.
Safety
r
lte
755200WB
755150WB
SECUREFLOWTM WC Flush Control Set for Cisterns
it
w
• cross wall 200mm, for walls ≤ 175mm
cross wall 150mm, for walls ≤ 125mm
AB •
u
ho
30.0
SecureflowTM Shower Control
- Tamperproof, anti-ligature push-button control for walls <= 125mm
or <= 175mm.
- Automatic shut-off recommended setting ~10-12 seconds (adjustable).
- Flow rate pre-set at 6 lpm at 3 bar.
- Anti-ligature fittings in stainless steel with colour-coded anodised
red and blue markers.
200/150
1/2”BSP
• Prisons and Secure Installations.
• Healthcare: Mental Health Units where
people may be at risk.
ilt
tf
755200SH
755150SH
Through-the-wall control for vandal proof washbasins.
100.0
80.0
• cross wall 200mm, for walls ≤ 175mm
• cross wall 150mm, for walls ≤ 125mm
SECUREFLOWTM Washbasin Control Set of 2
Uses
Flow Diagram Q (1/min)
Ø35
1/2”BSP
Advantages
Function
- Tamperproof, anti-ligature push-button control for walls <= 125mm
or <= 175mm.
- Automatic shut-off recommended setting ~30-45 seconds (adjustable).
- Flow rate pre-set at 8 lpm at 3 bar.
- Anti-ligature fittings in stainless steel with colour-coded anodised
red and blue markers.
5
200/150
FLOW
(HOT)
- Economix 22/3 Combi TMV3 approved thermostatic mixing valve
to provide safe, temperature controlled hot water.
- Inlets: 22mm push fit for Cold & Hot Water supply and 15mm
for Non-Potable (Optional) with isolating and WRAS approved
double check valves.
- Outlets: 15mm JG push fit in banks of 2 or 4 conn. manifold for
Cold, safe anti-scald Hot & Non-Potable water supply.
• 4 HW, 4 CW outlets
• 2 HW, 2 CW outlets
• 2 HW, 2 CW, 2 non-potable outlets
TMVMAN4-4Mk3
TMVMAN2-2Mk3
TMVMAN2-2-2Mk3
For specific solutions, please contact the Technical Sales Team.
Header Manifold
97
Download PDF
Similar pages