User Guide
Important Messages
IMPORTANT: If the account type you want to set up is not in the device database, you will be
asked to enter more details. You should get all pertinent information for the email
account, such as incoming and outgoing server settings, before you proceed.
WARNING:
Use only network-approved or LG-approved batteries and chargers with your
phone. The failure to use a network-approved or LG-approved battery and
charger may increase the risk that your phone will overheat, catch fire, or
explode, resulting in serious bodily injury, death, or property damage
Important Messages
b
Table of Contents
Your Phone at a Glance ......................................................................................................... 1
Set Up Your Phone................................................................................................................. 2
Activate Your Phone ............................................................................................................... 3
Set Up Your Voicemail ........................................................................................................... 3
Your Phone's Overview .......................................................................................................... 4
Turn Your Phone On and Off .................................................................................................. 7
Battery and Charger ............................................................................................................... 8
Installing and Removing the Battery ....................................................................................... 9
Charging the Battery ..........................................................................................................10
Your Home Menu ..................................................................................................................11
Get to Know the Touchscreen ...............................................................................................11
Navigate Through the Menus ................................................................................................11
Touchscreen Navigation ....................................................................................................11
Navigate through Menus Using the QWERTY Keyboard ....................................................12
Back Up Within a Menu......................................................................................................13
Status Bar .............................................................................................................................13
Entering Text .........................................................................................................................16
Select a Text Input Mode ...................................................................................................16
Predictive Text Input ..........................................................................................................17
ABC Mode (Touch Keypad Only) .......................................................................................18
Enter Numbers, Symbols, Emoticons, Smileys and Preset Messages ...............................19
Handwriting ........................................................................................................................20
Enter Text With the QWERTY Keyboard ............................................................................20
Voicemail...............................................................................................................................21
Voicemail Notification and Alerts ........................................................................................22
Retrieve Your Voicemail Messages....................................................................................22
Make Phone Calls .................................................................................................................24
Dialing Options ..................................................................................................................25
Receive Phone Calls .............................................................................................................25
Missed Call Notification ......................................................................................................27
TOC
i
Call Emergency Numbers ..................................................................................................27
In-Call Options ...................................................................................................................28
Save a Phone Number .......................................................................................................29
Find a Phone Number ........................................................................................................29
Dial and Save Phone Numbers With Pauses .....................................................................29
Abbreviated Dialing ............................................................................................................30
Dial From the Contacts List ................................................................................................30
Speed Dialing ....................................................................................................................31
Plus (+) Code Dialing .........................................................................................................31
Caller ID ................................................................................................................................31
Call Waiting ...........................................................................................................................32
Make a 3-Way Call ................................................................................................................32
Call Forwarding .....................................................................................................................32
History ...................................................................................................................................33
Recent History Options ......................................................................................................33
Make a Call From Recent History ......................................................................................34
Save a Number From Recent History.................................................................................34
Prepend a Number From Recent History ...........................................................................34
Erase Recent History .........................................................................................................35
Display Settings.....................................................................................................................36
Screen Savers ...................................................................................................................37
Lockscreen Clock...............................................................................................................37
Brightness ..........................................................................................................................37
Backlight ............................................................................................................................37
Picture ID ...........................................................................................................................38
Font Size............................................................................................................................39
Power Save Mode ..............................................................................................................39
Whisper Notification ...........................................................................................................40
Quick Composer ................................................................................................................40
Volume Settings ....................................................................................................................40
Incoming Ringer .................................................................................................................40
Playback Volume ...............................................................................................................41
Power Up/Down .................................................................................................................41
TOC
ii
Key Beeps .........................................................................................................................41
Ringers ..................................................................................................................................41
Incoming Calls ...................................................................................................................42
Call Alerts ..........................................................................................................................43
Voicemail ...........................................................................................................................43
Messages ..........................................................................................................................43
Alarm/Calendar ..................................................................................................................43
Power Up/Down .................................................................................................................44
Vibration Settings ..................................................................................................................44
Silence All ..........................................................................................................................44
Text Entry Settings ................................................................................................................45
Phone Info .............................................................................................................................45
Lock Phone Settings..............................................................................................................45
Parental Controls ...................................................................................................................46
Call Setup ..............................................................................................................................47
Auto-Answer Mode ............................................................................................................47
TTY .......................................................................................................................................48
Airplane/Music Mode .............................................................................................................49
Data Settings .........................................................................................................................49
Net Guard ..........................................................................................................................49
Update Profile ....................................................................................................................50
Headset Mode .......................................................................................................................50
Language (Idioma) ................................................................................................................50
Location Settings ...................................................................................................................50
Roaming ................................................................................................................................51
Set Roam Mode .................................................................................................................51
Call Guard..........................................................................................................................52
Data Roam Guard ..............................................................................................................52
Reset/Delete..........................................................................................................................53
Add a New Contacts Entry.....................................................................................................55
Save a Phone Number ..........................................................................................................56
Contacts Entry Options ..........................................................................................................56
Edit a Contacts Entry .............................................................................................................57
TOC
iii
Add a Number to a Contacts Entry ........................................................................................57
Edit a Contacts Entry’s Numbers ...........................................................................................57
Assign Speed Dial Numbers ..................................................................................................58
Select a Ringer Type for an Entry ..........................................................................................59
Assign a Picture to an Entry ..................................................................................................59
Create a Group......................................................................................................................59
Find Contacts Entries ............................................................................................................60
Secret Contacts Entries .........................................................................................................61
Hello UI .................................................................................................................................61
Text Messaging and MMS .....................................................................................................64
Compose Text/Picture Messages ......................................................................................64
Access Text/Picture Messages ..........................................................................................65
Messaging Settings ............................................................................................................65
Email .....................................................................................................................................67
Get Started With Email.......................................................................................................67
Access Email .....................................................................................................................67
Social Networking ..................................................................................................................68
Games, Ringers, and More....................................................................................................69
Get Started With Data Services .............................................................................................71
Navigate the Web ..............................................................................................................72
Browser Menu .......................................................................................................................73
Take Pictures ........................................................................................................................75
Assign Pictures ..................................................................................................................76
Camera Mode Options .......................................................................................................76
Camera Settings ................................................................................................................78
Record Videos .......................................................................................................................78
Video Mode Options ..........................................................................................................79
Video Settings ....................................................................................................................80
Store Pictures and Videos .....................................................................................................80
Send Pictures and Videos .....................................................................................................82
Send Pictures and Videos From the In Phone Folder or Memory Card ..............................82
Send Pictures and Videos From Messaging.......................................................................83
Other Settings ....................................................................................................................83
TOC
iv
Clock .....................................................................................................................................85
Calendar................................................................................................................................86
Event Alert Menu ...............................................................................................................87
Erase Events .....................................................................................................................87
Bluetooth ...............................................................................................................................88
Turn Bluetooth On and Off .................................................................................................89
Bluetooth Settings ..............................................................................................................89
Pair Bluetooth Devices .......................................................................................................90
Send Items via Bluetooth ...................................................................................................90
Update Phone .......................................................................................................................90
Update Firmware ...............................................................................................................91
Update the PRL .................................................................................................................91
Mass Storage ........................................................................................................................91
Your Phone’s microSD Card and Adapter ..........................................................................91
microSD Adapter................................................................................................................92
Format Memory Card .........................................................................................................93
Memory Info .......................................................................................................................93
File Manager ......................................................................................................................93
Connect Your Phone to Your Computer .............................................................................95
Voice Service ........................................................................................................................96
Automatic Speech Recognition (ASR)................................................................................96
Voice Reader .....................................................................................................................98
Voice Memos .....................................................................................................................98
Settings & Info .................................................................................................................100
Calculator ............................................................................................................................100
Stopwatch ........................................................................................................................100
World Clock .....................................................................................................................100
Unit Converter ..................................................................................................................101
EZ Tip Calculator .............................................................................................................101
Notepad...............................................................................................................................102
Document Viewer ................................................................................................................102
Index .......................................................................................................................................104
TOC
v
Get Started
This section gives you all the information you need to set up your phone and wireless service for
the first time.
Your Phone at a Glance
Set Up Your Phone
Activate Your Phone
Set Up Your Voicemail
Your Phone at a Glance
The following illustrations outline your phone's primary external features and buttons.
Get Started
1
Set Up Your Phone
You must first install and charge the battery to begin setting up your phone.
1. Install the battery.

Remove the battery from its packaging.

Insert the battery into the battery compartment in the back of the phone. Make sure
the connectors align (see step 1 in the following illustration). Gently press down to
secure the battery (see step 2 in the following illustration).

Position the back cover over the battery compartment and press down until you hear
a click (see step 3 in the following illustration).
2. Press and hold
on the top left of the phone to turn the phone on.

If your phone is activated, it will turn on, search for service, and enter standby mode.

If your phone is not yet activated, see Activate Your Phone for more information.
3. Make your first call.

Press

Use your dial pad to enter a phone number.

Touch Talk or press
to display the dial pad.
to dial the phone number.
Note: Your phone’s battery should have enough charge for your phone to turn on and find a
signal, set up your voicemail, and make a call. You should fully charge your battery as
soon as possible. See Charging the Battery for details.
Get Started
2
Activate Your Phone
Follow the instructions below to activate your phone if it has not already been activated.
Depending on your account or how and where you purchased your device, it may be ready to
use or you may need to activate it on your wireless account.
●
If you purchased your phone at a store, it is probably activated and ready to use.
●
If you received your phone in the mail and it is for a new wireless account or a
new line of service, it is designed to activate automatically. To confirm your activation,
make a phone call.
●
If you received your phone in the mail and you are activating a new phone for an
existing number on your account, you will need to contact your wireless service
provider to activate the phone.
Tip:
Do not turn the phone off while it is being activated. Turning it off cancels the activation
process.
Note: If you are having difficulty with activation, contact your wireless service provider.
Set Up Your Voicemail
Your phone automatically transfers all unanswered calls to your voicemail, even if your phone is
in use or turned off. You should set up your voicemail and personal greeting as soon as your
phone is activated. Always use a passcode to protect against unauthorized access.
1. From the Home screen, press
2. Touch and hold
to display the dial pad.
.
3. Follow the system prompts to:

Create your passcode.

Record your name announcement.

Record your greeting.
Note: Voicemail Password – It is strongly recommended that you create a password when
setting up your voicemail to protect against unauthorized access. Without a password,
anyone who has access to your phone is able to access your voicemail messages.
For more information about using your voicemail, see Voicemail.
Get Started
3
Phone Basics
Your phone is packed with features that simplify your life and expand your ability to stay
connected to the people and information that are important to you. The topics in this section will
introduce the basic functions and features of your phone.
Your Phone's Overview
Turn Your Phone On and Off
Battery and Charger
Your Home Menu
Get to Know the Touchscreen
Navigate Through the Menus
Status Bar
Entering Text
Voicemail
Tip:
Phone Software Upgrades – Updates to your phone’s software may become available
from time to time. Your wireless provider will automatically upload critical updates to your
phone. You can also use the menu to check for and download updates. Touch
>
Main Menu > (slide the screen up to display more menu items) > Tools > Update
Phone > Update Firmware to search for and download available updates.
Your Phone's Overview
The illustrations and descriptions below outline your phone’s basic layout.
Phone Basics
4
Key Functions
1. Power/Lock Button locks the screen. Press and hold to turn the phone on or off.
2. Earpiece lets you hear the caller and automated prompts.
3. 3.5mm Headset Jack allows you to plug in a headset for convenient, hands-free
conversations.
CAUTION! Inserting an accessory into the incorrect jack may damage the phone.
4. Status Light indicates incoming calls, new messages, or other events by blinking. It is
red while charging and turns green when charging is completed.
5. Battery Strength Indicator represents the amount of remaining battery charge
currently available in your phone. When all bars are displayed in the battery icon, the
phone’s battery is fully charged. When no bars are displayed, the phone’s battery is
nearly completely discharged.
6. Status Bar Icons provide information about your phone’s status and options, such as
signal strength, roaming, ringer setting, messaging, and battery charge.
7. Touchscreen displays all the information needed to operate your phone, such as the
call status, the Contacts list, the date and time, and the signal and battery strength.
8. Home Key lets you go back to the Home menu in any menu display. To go back to
standby mode, press this key again.
Phone Basics
5
9. Talk Key reveals the dial pad on the screen. Hold down to activate Voice Command
while in standby mode.
10. Back Key returns you to the previous menu when in a sub-menu. This key also allows
you to return to the previous screen when using the Browser.
11. Microphone allows other callers to hear you clearly when you are speaking to them.
12. QWERTY Keyboard lets you enter numbers, letters, and characters. Press the
number keys for speed dialing.
QWERTY Keyboard
13. Emoticon/ Symbols Key lets you enter emoticons when entering text.
14. Shift Key lets you to capitalize letters.
15. Function Key allows you enter the alternate character (such as @ for the B key) on
the QWERTY keyboard. See Enter Text With the QWERTY Keyboard.
16. Space Key lets you enter a space.
17. Delete/Back Key deletes characters from the display in text entry mode. When in a
menu, pressing this key returns you to the previous menu. This key also allows you to
return to the previous screen when using the Browser.
18. Enter Key lets you move the cursor to the beginning of the next line.
19. Navigation Keys let you move the cursor up, down, right or left to navigate menus or
when using the Browser.
Phone Basics
6
Rear View
1. Camera Lens is used for picture taking and video recording. Keep clean for optimal
performance.
2. Camera Self-portrait Mirror helps you when you take a self-portrait.
3. Camera Button lets you activate the camera and camcorder to take pictures and
videos.
4. Speaker lets you hear the different ringers and sounds. You can mute the ringer when
receiving incoming calls by touching Silence. The speaker also lets you hear the
caller’s voice when in speakerphone mode.
5. Volume Button allows you to adjust the ringer volume or adjust the voice volume
during a call.
6. Charger/Accessory Port allows you to connect the phone charger or an optional
USB cable.
CAUTION! Inserting an accessory into the incorrect port may damage the phone.
7. Fingertip Cutout allows you to lift and remove the phone's back cover.
8. microSD Slot accommodates a microSD™ card (expandable up to 32GB).
Turn Your Phone On and Off
The instructions below explain how to turn your phone on and off.
Turning Your Phone On
► Press and hold
Phone Basics
.
7
Once your phone is on, it may display “Searching for Service.” When your phone finds a signal,
it enters standby mode – the phone’s idle state. At this point, you are ready to begin making and
receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is
automatically activated. When a signal is found, your phone automatically returns to standby
mode.
In Power Save mode, your phone searches for a signal periodically without your intervention.
You can also initiate a search for network service by pressing any key (when your phone is
turned on).
Tip:
The Power Save feature conserves your battery power when you are in an area where
there is no signal.
Turning Your Phone Off
► Press and hold
screen.
for two seconds until you see the powering-down animation on the
Your screen remains blank while your phone is off (unless the battery is charging).
Battery and Charger
Your phone is equipped with a Lithium Ion (Li-Ion) battery. It allows you to recharge your battery
before it is fully drained.
WARNING:
Use only network-approved or LG-approved batteries and chargers with your
phone. The failure to use a network-approved or LG-approved battery and
charger may increase the risk that your phone will overheat, catch fire, or
explode, resulting in serious bodily injury, death, or property damage.
Network-approved or LG-approved batteries and accessories can be found at service provider
stores or through LG. Contact your wireless service provider or LG to order.
Battery Capacity
The battery provides up to 5.3 hours of continuous digital talk time.
When the battery reaches 5% of its capacity, the battery icon blinks. When there are
approximately two minutes of talk time left, the phone sounds an audible alert and then turns off.
Note: Long backlight settings, searching for service, vibrate mode, browser use, and other
variables may reduce the battery’s talk and standby times.
Tip:
Watch your phone’s battery level indicator and charge the battery before it runs out of
power.
Phone Basics
8
Installing and Removing the Battery
Installing the Battery
1. Remove the battery from its packaging.
2. Insert the battery into the battery compartment in the back of the phone. Make sure
the connectors align (see step 1 in the following illustration). Gently press down to
secure the battery (see step 2 in the following illustration).
3. Position the back cover over the battery compartment and press down until you hear a
click (see step 3 in the following illustration).
Removing the Battery
Before you remove your phone's battery, make sure that the power is off.
1. Make sure the power is off so that you don’t lose any stored numbers or messages.
2. Lift the back cover using the fingertip cutout located at the bottom of the cover and
remove it.
3. Lift the battery using the fingertip cutout located at the bottom of the battery
compartment and remove it from the phone.
WARNING:
Phone Basics
Do not handle a damaged or leaking Li-Ion battery as you can be burned.
9
Charging the Battery
Keeping track of your battery’s charge is important. If your battery level becomes too low, your
phone automatically turns off, and you will lose any information you were working on.
Always use a network-approved or LG-approved desktop charger, travel charger, or vehicle
power adapter to charge your battery.
1. Connect the cableless wall adapter and USB cable as shown.
2. Plug the small end of the charger into the phone’s Charger/ Accessory Port and the
other end into an electrical outlet.

A red status light means the battery is charging.

A green status light means the battery is at least 90 percent charged.
With the network-approved Li-Ion battery, you can recharge the battery before it becomes
completely discharged.
Note: Always unplug the charger from the wall socket after the phone is fully charged to save
unnecessary power consumption of the charger.
Phone Basics
10
Your Home Menu
Your phone offers you the option of customizing the Home menu with the most frequently used
menus for direct access.
1. Touch
to open the Home menu.
2. Touch Add. (Main menus are displayed.)
3. Touch
to the right of a menu option to add that menu option to your Home menu.
To navigate to a specific submenu, touch a menu option repeatedly until you see the
submenu you want and touch
.
4. When you finish selecting menus to add, touch Done.
Get to Know the Touchscreen
Your phone is equipped with a touchscreen for easy access to your favorite functions and
features. Touch key sensors are very sensitive and require only a light touch — you don’t need
to press them forcefully to use them. Pressing touch keys too hard may damage the touch
keypad.
●
Use the tip of your finger to touch the center of a touch key. If you touch off-center it may
activate an adjacent key instead.
●
The touchscreen is automatically locked when the backlight is off. To lock manually,
press
.
●
To unlock the touchscreen, press and hold
WARNING:
.
Don’t place anything heavy on the touchscreen. Be careful not to scratch the
touchscreen with sharp objects.
Do not store your phone in extreme conditions (places that are too humid, hot, or
cold), or around chemicals, which may change the cosmetic or functional
features of your phone.
Navigate Through the Menus
It's easy to navigate through your phone's menus using the touchscreen.
Touch
> Main Menu to access menus.
Touchscreen Navigation
To scroll through lists, touch the screen and slide your finger up the screen as shown in the
following figure. The list will move up so more items are visible. To display the top of the list
again, slide the screen down.
Phone Basics
11
To select an item, touch it on the menu.
For example, to view your text messages:
1. Touch
and then Main Menu to access the main menu.
2. Touch Messaging.
3. Touch Messages (If you have any text messages, they are displayed).
Navigate through Menus Using the QWERTY Keyboard
The Navigation Keys on the QWERTY keyboard let you quickly scroll through on-screen items.
To navigate through a menu, press the up and down Navigation Keys. As you navigate through
the menu, options are highlighted. Select any option by highlighting it and pressing
.
For example, to view your text messages:
1. From standby mode, press
Main Menu. Then press
and press the down Navigation Key to highlight
to access the main menu.
2. Select Messaging by pressing the down Navigation Key until you see that menu
option and pressing
.
3. Use the down Navigation Key to find the Messages menu option and press
(If you have any text messages, they are displayed.)
Phone Basics
12
.
For the purposes of this guide, the steps described (using either the touch keypad or the
QWERTY keyboard) condense into:
► Touch
> Main Menu > Messaging > Messages.
Back Up Within a Menu
It's easy to go back to a previously accessed menu or return to standby mode.
To go to the previous menu:
► Press
.
– or –
► Press
on the QWERTY keyboard.
To return to standby mode:
► Press
twice.
– or –
► Touch the header icon
(see Touchscreen Navigation).
Status Bar
Your phone’s Status Bar provides information about your phone’s status and options. This list
identifies the symbols you’ll see on your phone’s Status Bar:
Tip:
To view a list of your phone’s icons and descriptions, from the Home screen touch
Main Menu > Settings > Phone Info > Icon Glossary.
Status Bar – Service Icons
1x Signal Strength – Shows your current 1xRTT signal strength (More bars =
stronger signal; bars are yellow).
EVDO Signal Strength – Shows your current EVDO signal strength (More bars
= stronger signal; bars are white).
No Service – Your phone cannot find a usable signal.
Roaming – Your phone is “roaming” off the home network.
EVDO Data Service – Mobile broadband data service (EVDO) is available.
When active, the icon is animated.
1x Service Activated – Indicates that 1xRTT data service is available. When
active, the icon is animated.
1x Service Deactivated – Indicates that 1xRTT data service is deactivated.
Phone Basics
13
>
Status Bar – Service Icons
1x Service Unavailable – Data service is currently unavailable.
Status Bar – Status Icons
Airplane/Music Mode – Indicates that the phone is in Airplane/Music Mode.
Full Battery – Shows your current battery charge level. (Icon shown is fully
charged.)
Low Battery – Shows that the battery is low.
Ringer Only – Indicates that the ringer only is set for the call alert.
Vibrate Only – Indicates that the ringer volume is set to vibrate only.
1 Beep – Indicates that one beep is set for the call alert.
1 Beep & Vibrate – Indicates that one beep and vibration is set for the call alert.
Vibrate All – Indicates that the ringer volume is set to vibrate all.
Ringer Off – The ringer is set to off.
Silence All – All sounds are turned off.
Ringer & Vibrate – Indicates that the ringer and vibrate mode is set.
Bubble Icon – Indicates you have missed alerts such as voicemail, missed
calls, new messages, scheduled events, or a completed wireless backup.
Location On – Your phone’s location feature is on and available for locationbased services such as GPS Navigation.
Location Off – Your phone’s location feature is off. Your location is available
only for 911.
TTY – Indicates your phone is operating in TTY mode.
Speaker – Indicates that the speaker is activated.
Bluetooth Enabled (Hidden) – Indicates that the Bluetooth function is enabled
but hidden from other devices.
Bluetooth Enabled (Visible) – Indicates that the Bluetooth function is enabled
and is visible to other devices.
Bluetooth Connected – Indicates that the Bluetooth function is connected.
Bluetooth Connected (Mono/Stereo Headset) – Indicates that the Bluetooth
function is connected to a mono or stereo headset.
Phone Basics
14
Status Bar – Status Icons
Bluetooth Connected (Stereo Speaker) – Indicates that the Bluetooth function
is connected to a stereo speaker.
Alarm Clock – Indicates that an alarm is activated.
Missed Calls – Indicates missed calls.
Incoming Calls – Indicates incoming calls.
Outgoing Calls – Indicates outgoing calls.
Camera/Picture – Indicates camera mode.
Camcorder/Video – Indicates camcorder mode.
1 Background Application – Indicates that one application is active.
2 Background Applications – Indicates that 2 applications are active.
3 Background Applications – Indicates that 3 applications are active.
4 Background Applications – Indicates that 4 applications are active.
5 Background Applications – Indicates that 5 applications are active.
Camera Resolution 2M – Indicates that the camera resolution is set to 2M.
Camcorder Resolution QVGA – Indicates that the camcorder resolution is set
to QVGA.
Camera Resolution High – Indicates that the camera resolution is set to High.
Camera/Camcorder Resolution Med – Indicates that the camera/camcorder
resolution is set to Medium.
Camera/Camcorder Resolution Low – Indicates that the camera/camcorder
resolution is set to Low.
Enable Auto-Send – Indicates that the Auto-Send feature is enabled.
Disable Auto-Send – Indicates that the Auto-Send feature is disabled.
Status Bar – Messaging Icons
Urgent Message – Indicates you have new urgent messages.
Sent Message – Indicates the message is sent.
Phone Basics
15
Status Bar – Messaging Icons
Received Message – Indicates the message is received.
Recipient – Indicates the recipient field.
File Attachment – Indicates the file attachment field.
File Attached – Indicates a file is attached.
Audio file attached – Indicates an audio file is attached.
Voice file attached – Indicates a voice file is attached.
Calendar file attached – Indicates a calendar file is attached.
Contact file attached – Indicates a contact file is attached.
Entering Text
Your phone provides convenient ways to enter letters, numbers, and symbols whenever you are
prompted to enter text (for example, when adding a Contacts entry or when using email and text
messaging).
Select a Text Input Mode
Predictive Text Input
ABC Mode (Touch Keypad Only)
Enter Numbers, Symbols, Emoticons, Smileys and Preset Messages
Handwriting
Enter Text With the QWERTY Keyboard
Select a Text Input Mode
You can use the touch keypad or the QWERTY keyboard. While you are using the touch
keypad, you can switch to and from the QWERTY keyboard.
Phone Basics
16
On the Touch Keypad
1. From a screen where you can enter text, touch
to change the text input mode.
2. Select one of the following options:

Predictive to enter text using a predictive text entry system that reduces the number
of keystrokes required to enter a word.

Abc to use multi-touch entry – touch
once for “a,” twice for “b”, three times for
“c.”
Tip:

123 to enter numbers by touching the numbers on the keypad.

Symbols to enter symbols.

Emoticon to enter “emoticons.”

Smileys to enter smileys.
When entering text, touch
abc).
or press
to change letter capitalization (Abc > ABC >
Predictive Text Input
Predictive Text Input lets you enter text using a few keystrokes per word. (To select the
Predictive Text mode when entering text, see Select a Text Input Mode.)
Predictive Text Input uses an intuitive word database to analyze the letters you enter and create
a suitable word. (The word may change as you type.)
1. Select the predictive text input mode.
Phone Basics
17
2. Enter a couple of letters of a word. When you enter a letter of a word, a small window
will appear and shows the words starting with the letters. If you make a mistake, touch
or press
to erase a single character. Touch and hold
or press and hold
to erase an entire word.
3. Touch
and scroll to the desired word. Then touch the desired word.
4. If a word you want to enter is not displayed in the list, select Add Word? to add a
word to the Predictive Text Input database.
5. Enter the word and touch Done. The word will appear as an option the next time you
scroll through options during Predictive Text Input.
For more information about Predictive Text Input, visit the T9 Web site at www.T9.com.
ABC Mode (Touch Keypad Only)
In Abc mode, also known as multi-touch entry, you touch keys one, two, three, or four times to
enter the letters you see on the keypad. For example, touch
three times for “c”; or touch
“s.”
once for “a,” twice for “b”, or
once for “p,” twice for “q,” three times for “r,” or four times for
1. Select the Abc mode. (See Select a Text Input Mode.)
2. Touch the corresponding keys repeatedly until the correct letter appears. (For example,
to enter the word “Bill,” touch
three times again.)
twice,
If you make a mistake, touch
erase an entire word.
to erase a single character. Touch and hold
three times,
three times, and
to
By default, the first letter of an entry is capitalized and the following letters are lowercased. You
can change the letter case using
.
Characters scroll in the following order:
Phone Basics
18
Enter Numbers, Symbols, Emoticons, Smileys and Preset
Messages
Use your phone's keypad to enter numbers, symbols, emoticons, smileys, or to choose from
preset messages.
To enter numbers:
► Select the 123 mode and touch the appropriate key. (See Select a Text Input Mode.)
To enter symbols:
► Select the Symbols mode. (See Select a Text Input Mode.) To enter a symbol, touch
the appropriate key indicated on the display.
To enter “emoticons” (graphics):
► Select the Emoticon mode and touch the appropriate key. (See Select a Text Input
Mode.)
To enter smileys (text):
► Select the Smileys mode and touch the appropriate key. (See Select a Text Input Mode.)
To enter preset messages:
1. Touch Preset Msgs at the top right corner of the screen.
2. Select the message you want by touching it.
Phone Basics
19
Note: Preset messages make composing text messages easier by allowing you to enter quick
messages, such as “Meet me at,” “Let’s get lunch,” or a customized message of your
own. (For more information on preset messages, please see Manage Preset
Messages.)
Handwriting
When entering text, besides “typing” the text with the touch keypad, you also have the option to
write with your fingertip. The touchscreen converts your movements into characters.
1. Touch PEN on the keypad. The handwriting entry screen appears.
2. Write within the handwriting entry screen. To change letter case or shift between
letters, numbers, and symbols, touch the icons just above the handwriting entry screen.
When you are finished, touch Done.
Enter Text With the QWERTY Keyboard
Your phone has a built-in QWERTY keyboard, specifically designed for easy and comfortable
text entry. The QWERTY keyboard uses the same layout and works just like the keyboard on
your computer. The easiest way to enter text is by using your thumbs to type on the QWERTY
keyboard.
Phone Basics
20
1. From a screen where you can enter text, touch Abc and select whether to turn the
predictive text entry system on or off.
2. Use your thumbs to enter text.

To change capitalization, press

To enter an alternate character on a key, press
.
character’s key. To lock the Function Key, press

To enter “emoticons,” press
To enter symbols, press
.
and touch the desired one or press the Navigation Keys
to highlight a symbol and press

twice.
and touch an emoticon or press the Navigation Keys
to highlight an emoticon and press

and then press the alternate
.
To enter preset messages, touch Preset Msgs at the top right corner of the screen.
Select the message you want by touching it.
Voicemail
Your phone automatically transfers all unanswered calls to your voicemail, even if your phone is
in use or turned off. You should set up your voicemail and personal greeting as soon as your
phone is activated. Always use a password to protect against unauthorized access.
1. Press
Phone Basics
to open the dial pad.
21
2. Touch and hold
to dial your voicemail.
3. Follow the system prompts to:

Create your password.

Record your name announcement.

Record your greeting.
Note: Voicemail Password
It is strongly recommended that you create a password when setting up your voicemail
to protect against unauthorized access. Without a password, anyone who has access to
your phone is able to access your voicemail messages.
Voicemail Notification and Alerts
When you receive a new voice message, your phone alerts you and prompts you to call your
voicemail. There are several ways your phone alerts you to a new voicemail message:
●
By displaying a message on the screen.
●
By sounding the assigned ringer type.
●
By the LED blinking red.
●
By displaying a Voicemail bubble on the screen.
To call your voicemail:
► Press
, then touch and hold
.
To display your Missed Log:
► Touch the bubble icon (such as
) on the Status Bar and then the notification.
Note: When you are roaming off the home network, you may not receive notification of new
voicemail messages. It is recommended that you periodically check your voicemail by
dialing 1 + area code + your wireless phone number. When your voicemail answers,
press
and enter your passcode. Roaming rates apply when you access voicemail
while roaming off the home network.
Your phone accepts messages even when it is turned off. However, your phone notifies
you of new messages only when it is turned on and you are in a network service area.
Retrieve Your Voicemail Messages
You can retrieve and review your messages directly from your wireless phone or from any other
touch-tone phone. To dial from your wireless phone, either speed dial your voicemail or use the
menu keys.
Phone Basics
22
Using One-Touch Message Access
► Press
, then touch and hold
. (Your phone will dial your voicemail box.)
Using the Menu Keys on Your Phone to Access Your Messages
1. Touch
> Main Menu > Messaging
2. Touch
on Voicemail to listen to your messages.
Note: You are charged for airtime minutes when you are accessing your voicemail from your
wireless phone.
Using Another Phone to Access Messages
1. Dial your wireless phone number.
2. When your voicemail answers, press the Star/Asterisk Key.
3. Enter your password.
Tip:
When you call into voicemail, you first hear the header information (date, time, and
sender information) for the message. To skip directly to the message, press 4 during the
header.
Voicemail Key Guide
Here’s a quick guide to your keypad functions while listening to voicemail messages.
Date/Time
Send Reply
Advance
Replay
Rewind
Forward
Erase
Return Call
Save
Cancel
Phone Basics
Help
Skip
23
Phone
With the home network and your phone, you can enjoy clear calling across the country.
Make Phone Calls
Receive Phone Calls
Caller ID
Call Waiting
Make a 3-Way Call
Call Forwarding
History
Make Phone Calls
You can make calls on your phone using either the on-screen dial pad or the QWERTY
keyboard.
1. Press
and enter a phone number using the dial pad or the QWERTY keyboard. (If
you make a mistake while dialing, touch
or press
to erase the numbers.)
2. Touch Talk or press
. (To make a call when you are roaming and Call Guard is
enabled, touch Roam Call and touch Talk. See Call Guard.)
Phone
24
3. To end the call, touch and drag the toggle key to End Call.
Tip:
To redial other recent numbers, press
, enter the desired number, and touch Talk.
When making calls off the home network, always dial using 11 digits (1 + area code +
phone number).
You can also place calls from your phone by speed dialing numbers from your Contacts, using
your History listings, and ASR (Automatic Speech Recognition).
Dialing Options
When you enter numbers you will see a variety of dialing options displayed on the phone’s
screen.
To initiate an option, touch the corresponding key.
●
Save: Enter a seven-digit or ten-digit number (phone number and area code) and touch
Save to save the phone number in your Contacts. See Save a Phone Number.
●
Contact Details: Displays Contacts details for numbers that are already saved in the
phone.
●
Send Msg: Enter a seven-digit or ten-digit number and touch this to quickly send a
message to the number.
●
Pause: Enter digits and touch this to enter a pause within a number string. See Dial and
Save Phone Numbers With Pauses
Tip:
To speed dial a phone number, touch and hold the speed dial number. If the speed dial
number is two digits, enter the first digit, and then touch and hold the second digit. For
information on setting up speed dial numbers, see Assign Speed Dial Numbers. This
feature will not work when you are roaming off the home network; when roaming you
must dial using eleven digits [1 + the area code + the seven-digit phone number].
Receive Phone Calls
The following instructions show you how to answer incoming calls, mute the ringer on incoming
calls, reject incoming calls, send calls directly to voicemail, or reject a call and send a text
instead.
Missed Call Notification
Call Emergency Numbers
In-Call Options
Save a Phone Number
Find a Phone Number
Phone
25
Dial and Save Phone Numbers With Pauses
Abbreviated Dialing
Dial From the Contacts List
Speed Dialing
Plus (+) Code Dialing
Answer an Incoming Call.
1. Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.)
2. Touch Answer.
– or –
Touch and drag the toggle key to Answer.
Your phone notifies you of incoming calls in the following ways:
●
The phone rings or vibrates.
●
The status light flashes.
●
The backlight illuminates.
●
The screen displays an incoming call message.
If the incoming call is from a number stored in your Contacts, the entry’s name is displayed. You
may also see the caller’s phone number, if available.
Receive Call Options
You also see the following options if your phone is on standby. To select an option, touch the
corresponding touch key.
●
Silence to mute the ringer.
●
Send to Voicemail to send the call to voicemail.
●
Ignore with Text to send a text message. You can send the preset message or write a
new one.
●
Answer to answer the call.
Answer a Roam Call With Call Guard Enabled
Call Guard is an option that helps you manage your roaming charges when making or receiving
calls while outside the home network. Please see Roaming for more information about roaming.
Phone
26
► Touch Answer to answer the call. (See Call Guard for additional information.)
Note: When your phone is off, calls go directly to voicemail
Ending a Call
► Touch or drag the toggle key to End Call.
Missed Call Notification
When you do not answer an incoming call, your screen displays the Missed Call log in a bubble
on the Home screen.
► Touch the entry. To dial the phone number, touch Call. To send a message, touch Send
Msg.
Call Emergency Numbers
You can place emergency calls to 911, even if your account is restricted.
Note: When you place an emergency call, your phone automatically enters Emergency mode.
To call the 911 emergency number:
Press
and dial
Talk.
During an emergency call, you will see a variety of options displayed on the screen.
To initiate an option, touch the following:
●
My Phone# to display your phone number during an emergency call.
●
Speaker to activate speakerphone mode. If you are in speakerphone mode, the option is
displayed as Speaker Off to deactivate.
●
Dial Pad to display the dial pad.
●
More to access the following options:

Phone Info to check the phone number, version, etc.

Cancel to close the pop-up menu.
To exit Emergency mode:
1. Touch End Call to end a 911 call.
2. Touch Exit to exit from the Emergency mode.
Phone
27
Enhanced 911 (E911) Information
This phone features an embedded Global Positioning System (GPS) chip necessary for utilizing
E911 emergency location services where available.
When you place an emergency 911 call, the GPS feature of your phone seeks information to
calculate your approximate location. Depending on several variables, including availability and
access to satellite signals, it may take up to 30 seconds or more to determine and report your
approximate location.
Important:
Always report your location to the 911 operator when placing an emergency call.
Some designated emergency call takers, known as Public Safety Answering
Points (PSAPs) may not be equipped to receive GPS location information from
your phone.
In-Call Options
Several in-call features are available as options during a call. To select an option, touch the
corresponding touchkey. The following options may be available:
●
Mute to mute the microphone. Touch Unmute to unmute the microphone.
●
Speaker to activate speakerphone mode. If you are in speakerphone mode, the option is
displayed as Speaker Off to deactivate.
WARNING:
Because of higher volume levels, do not place the phone near your ear during
speakerphone use.
●
Dial Pad to display the dial pad.
●
End Call to end the call.
●
More to access the following options:
Phone

Save to save a phone number in your Contacts. See Save a Phone Number.

Contact Details to display the contact details (if the contact is saved in the Contacts).

Main Menu to display the phone’s main menu.

3-Way Call to initiate a 3-way call.

Contacts to display your Contacts list.

Voice Memo to record the current conversation.

Phone Info to check the phone number, version, etc.

Cancel to close the pop-up menu.
28
Save a Phone Number
You can store 600 Contacts entries with up to seven phone numbers per Contact in your phone.
Each entry’s name can contain 64 characters. Your phone automatically sorts the Contacts
entries alphabetically. For more information, see Contacts.
To save a number from standby mode:
1. Press
to display the dial pad.
2. Enter a phone number.
3. Touch Save.
4. Touch New Entry for a new contact or Existing Entry to add a number to an existing
contact.
5. Touch a label for the number (Mobile, Home, Work, Pager, Fax, or Other).
6. Touch the Enter Name field and enter the new contact name using the touch keypad
or QWERTY keyboard.
– or –
Search an existing contact name and touch it to save the new number.
7. Touch Done to save the new entry.
Find a Phone Number
You can find a phone number by searching Contacts for entries by name.
1.
Press
and touch
. The Contacts list is displayed.
2. Touch
and enter the first letter or letters of an entry. (The more letters you enter,
the more specific the search.) To display an entry, touch it.
3. To dial a number, touch Call or press
.
Dial and Save Phone Numbers With Pauses
You can dial or save phone numbers with pauses for use with automated systems, such as
voicemail or credit card billing numbers.
Note: You can have multiple pauses in a phone number.
To dial or save phone numbers with pauses:
1. Press
and enter the phone number.
2. Touch Pause.
Phone
29
3. Enter additional numbers.
4. Touch Talk to dial the number.
– or –
Touch Save to save the number in your Contacts.
Note: When dialing a number with a pause, touch Send Tones.
Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. You can use either of the following abbreviated
dialing features.
●
Contacts Match – Retrieve any number saved in your Contacts by entering any
consecutive three digits of the number. Touch Talk to dial the retrieved number. (See
Set Abbreviated Dialing.)
●
Prepend – Prepend the first five or six digits (for example, the area code and prefix) to
any four or five digits you enter. Touch Talk to dial the resulting number. (See Set
Abbreviated Dialing.)
To place a call using Contacts Match Abbreviated Dialing:
1. Press
and enter three to six digits of a Contacts entry’s phone number. The
numbers in your Contacts list that contain matches will display.
2. Touch
to display the details.
3. Touch the contact you want to call and then touch Talk.
To place a call using Prepend Abbreviated Dialing:
1. Press
and enter the last four or five digits of the phone number. The Abbreviated
Dialing number will display.
2. Touch
to display the details.
3. Touch the number and touch Talk.
Dial From the Contacts List
You can dial a phone number directly from your Contacts list.
1. Press
and touch
.
2. Touch the entry you want to call and touch Call.
Phone
30
3. If multiple numbers are saved in the Contact entry, touch Contact Details then the
number you wish to dial.
Speed Dialing
You can store up to 98 numbers in your phone’s speed dial memory. Dial speed dial entries
using one key touch for locations 2–9 or two key touches for locations 10–99.
To use One-Touch Dialing for speed dial locations 2–9:
► Touch and hold the appropriate key for approximately two seconds. The display confirms
that you have dialed the number when it shows “Connecting...”.
To use Two-Touch Dialing for speed dial locations 10–99:
1. Touch the first digit.
2. Touch and hold the second digit for approximately two seconds. The display confirms
that you have dialed the number when it shows “Connecting...”.
Note: Speed dialing is not available when you are roaming; when you are roaming off the
home network, you must always dial using eleven digits (1 + area code + number).
Plus (+) Code Dialing
When placing international calls, Plus Code Dialing automatically enters the international access
code for your location (for example, 011 for international calls made from the U.S.).
1. Press or touch and hold
until you see a “+” on the display screen.
2. Dial the country code and phone number, and then touch Talk. The phone
automatically prepends the access code for international dialing, followed by the
country code and phone number.
Caller ID
Caller ID allows people to identify a caller before answering the phone by displaying the number
of the incoming call. If you do not want your number displayed when you make a call, follow
these steps.
1. Press
and then touch
.
2. Enter a phone number.
3. Touch Talk.
To permanently block your number, contact your wireless service provider.
Phone
31
Call Waiting
When you’re on a call, Call Waiting alerts you to incoming calls by sounding two beeps. Your
phone’s screen informs you that another call is coming in and displays the caller’s phone
number (if it is available and you are in digital mode).
To respond to an incoming call while you’re on a call:
► Touch
. This puts the first caller on hold and answers the second call.
To switch back to the first caller:
► Touch
again.
Note: For those calls where you don’t want to be interrupted, you can temporarily disable Call
Waiting by entering before placing your call. Call Waiting is automatically reactivated
once you end the call.
Make a 3-Way Call
With 3-Way Calling, you can talk to two people at the same time. When using this feature, the
normal airtime rates will be charged for each of the two calls.
1. Enter a number and press
.
2. Once you have established the connection, touch More > 3-Way Call.
3. From the options that appear at the top of your screen select a contact from your
Contact List, Recent History, or enter a number and touch Talk.
4. When you’re connected to the second party, touch Join to begin your 3-way call.
If one of the people you called hangs up during your call, you and the remaining caller stay
connected. If you initiated the call and are the first to hang up, all callers are disconnected.
Call Forwarding
Call Forwarding lets you forward all your incoming calls to another phone number – even when
your phone is turned off. You can continue to make calls from your phone when you have
activated Call Forwarding.
To activate Call Forwarding:
1. Press
and touch
.
2. Enter the area code and phone number to which you want your calls forwarded.
3. Touch Talk. You will see a message and hear a tone to confirm the activation of Call
Forwarding.
Phone
32
To deactivate Call Forwarding:
1. Press
, then touch
.
2. Touch Talk. You will see a message and hear a tone to confirm the deactivation.
Note: You are charged a higher rate for calls you have forwarded.
History
Recent History is a list of the last 60 phone numbers (or Contacts entries) for calls you placed,
accepted, or missed. Recent History makes redialing a number fast and easy. It is continually
updated as your phone automatically adds new numbers to the beginning of the list and
removes the oldest entries from the bottom of the list.
Each entry contains the phone number (if it is available) and Contacts entry name (if the number
is in your Contacts). Duplicate calls (same number and type of call) may only appear once on
the list.
Recent History Options
Make a Call From Recent History
Save a Number From Recent History
Prepend a Number From Recent History
Erase Recent History
View Recent History
1. From standby mode, press
and touch
.
2. Touch an entry.
Note: History records only calls that occur while the phone is turned on. If a call is received
while your phone is turned off, it will not be included in history.
If you return a call from the voicemail menu, it will not be included in your phone’s
history.
Recent History Options
Your Recent History menu options include calling, sending a message, viewing the history of a
caller, saving a number to contacts, and viewing contact details.
Touch a entry to access the following options:
●
Call to dial the entry.
●
Send Msg to send a message.
Phone
33
●
History to view all the history of the caller or receiver.
●
Save Contact to save the number if it is not already in your Contacts. (See Save a
Number From History.)
●
Contact Details to view the contact information (if the number has already been saved
to Contacts).
Touch Delete on the right top of the screen to delete multiple or all Recent History entries.
Make a Call From Recent History
The Recent History list lets you quickly place calls to recent incoming, outgoing, or missed
numbers.
1. From standby mode, press
and touch
.
2. Scroll through the History entries and touch
to dial the entry.
Note: You cannot make calls from History to entries identified as No ID or Restricted.
Save a Number From Recent History
Your phone can store up to 600 Contacts entries. Contacts entries can store up to a total of
seven phone numbers, and each entry’s name can contain 64 characters.
1. Touch a Recent History entry and touch Save Contact.
2. Select New Entry to create a new Contacts entry for the number or Existing Entry to
save the number to an existing entry.
3. Touch the phone label to select it (Mobile, Home, Work, Pager, Fax, or Other).
4. Touch the Enter Name field and enter the new contact name using the touch keypad
or QWERTY keyboard, and then touch Done.
– or –
Search an existing contact name and touch it to save the new number.
5. Touch Done to save the new entry.
Note: You cannot save phone numbers already in your Contacts or from calls identified as No
ID, Restricted or Unavailable.
Prepend a Number From Recent History
If you need to make a call from Recent History and you are outside your local area code, you
can add the appropriate prefix by prepending the number.
1. From standby mode, press
Phone
and touch
34
.
2. Touch a History entry and then touch History.
3. Touch an entry and touch Prepend.
4. Enter the prefix and press
to call the number.
Erase Recent History
You can erase one or all of your history entries from the Recent History list.
1. From standby mode, press
and touch
.
2. Touch Delete in the top right corner of the screen and select Delete Multiple or
Delete All.
3. After selecting entries to erase, touch Delete.
– or –
If you are certain you want to erase all the History entries, touch Delete.
Phone
35
Phone Settings
This section provides an overview of items you can change using your phone's Settings menus.
Display Settings
Volume Settings
Ringers
Vibration Settings
Text Entry Settings
Phone Info
Lock Phone Settings
Parental Controls
Call Setup
TTY
Airplane/Music Mode
Data Settings
Headset Mode
Language (Idioma)
Location Settings
Roaming
Reset/Delete
Display Settings
Adjusting your phone's display settings not only helps you see what you want, it can also help
increase battery life.
Screen Savers
Lockscreen Clock
Brightness
Backlight
Phone Settings
36
Picture ID
Font Size
Power Save Mode
Whisper Notification
Quick Composer
Screen Savers
Choose what you see on the display screen when in standby mode.
1. Touch
> Main Menu > (slide the screen up) > Settings > Display > Screen
Savers > Main Screen or Lock Screen.
2. Select No Image, Preloaded, My Photos, Assigned Media, Downloaded Images,
or Take New Picture.
3. Touch an image to view it. While viewing an image, you can flick the screen left or
right to scroll through and view other available images.
4. Touch Assign to assign an image.
Lockscreen Clock
Choose which clock will be displayed when the phone is locked.
1. Touch
Clock.
> Main Menu > (slide the screen up) > Settings > Display > Lockscreen
2. Select Off, Clock 1, Clock 2, or Clock 3.
Brightness
Adjust your screen’s brightness to suit your surroundings.
1. Touch
> Main Menu > (slide the screen up) > Settings > Display > Brightness.
2. Touch a brightness level bar to select it and touch Done.
Backlight
Select how long the display screen and keypad remain backlit after you press any key.
1. Touch
> Main Menu > (slide the screen up) > Settings > Display > Backlight.
2. Select Backlight Dim or Backlight Off.
3. Touch a time setting.
Phone Settings
37
Note: Long backlight settings reduce the battery’s talk and standby times.
Picture ID
Assign a picture to display each time a certain contact calls you.
Assign a picture to all contacts that don't have an assigned picture ID
1. Touch
> Main Menu > (slide the screen up) > Settings > Display > Picture ID.
2. Touch Contacts > Contacts with No Picture.
3. Select an option: No Image, Take New Picture, My Photos, Downloaded Images,
or Assigned Media.
4. Touch a picture and touch Assign to assign it.

If you selected Take New Picture, the camera will launch so that you can take a new
picture. (See Take Pictures for details.)

If you selected My Photos, you may need to select In Phone or Memory Card to
find the picture you want to use.
5. Touch Done to save the assigned picture.
Assign a picture to a particular contact
1. Touch
> Main Menu > (slide the screen up) > Settings > Display > Picture ID.
2. Touch Contacts > One Contact.
3. Select the contact to assign to.
4. Select an option: No Image, Take New Picture, My Photos, Downloaded Images,
or Assigned Media.
5. Touch a picture and touch Assign to assign it.

If you selected Take New Picture, the camera will launch so that you can take a new
picture. (See Take Pictures for details.)

If you selected My Photos, you may need to select In Phone or Memory Card to
find the picture you want to use.
6. Touch Done to save the assigned picture.
Assign a picture for incoming calls from unsaved numbers
1. Touch
Phone Settings
> Main Menu > (slide the screen up) > Settings > Display > Picture ID.
38
2. Touch Unsaved Numbers.
3. Select an option: No Image, Take New Picture, My Photos, Downloaded Images,
or Assigned Media.
4. Touch a picture and touch Assign to assign it.

If you selected Take New Picture, the camera will launch so that you can take a new
picture. (See Take Pictures for details.)

If you selected My Photos, you may need to select In Phone or Memory Card to
find the picture you want to use.
5. Touch Done to save the assigned picture.
Assign a picture for incoming calls from restricted or private numbers
1. Touch
> Main Menu > (slide the screen up) > Settings > Display > Picture ID.
2. Touch Private/Unknown.
3. Select an option: No Image, Take New Picture, My Photos, Downloaded Images,
or Assigned Media.
4. Touch a picture and touch Assign to assign it.

If you selected Take New Picture, the camera will launch so that you can take a new
picture. (See Take Pictures for details.)

If you selected My Photos, you may need to select In Phone or Memory Card to
find the picture you want to use.
5. Touch Done to save the assigned picture.
Font Size
Adjust the font you see when you are entering text (for example, when using the notepad or
when adding a Contacts entry).
1. Touch
> Main Menu > (slide the screen up) > Settings > Display > Font Size.
2. Select Messages, Browser, Notepad, or Applications.
3. Touch a size setting and Done.
Power Save Mode
Select whether to active or deactivate the Power Save mode. In Power Save mode, your phone
searches for a signal periodically without your intervention. You can also initiate a search for
Phone Settings
39
network service by pressing any key (when your phone is turned on). The Power Save mode
conserves your battery power when you are in an area where there is no signal.
1. Touch
> Main Menu > (slide the screen up) > Settings > Display.
2. Touch and slide the Power Save Mode setting to ON.
Whisper Notification
Set your phone to notify you with the whisper of new messages while you are operating the
phone. You can get new messages notification without interruption to what you are doing on the
phone.
1. Touch
> Main Menu > (slide the screen up) > Settings > Display > Whisper
Notification.
2. Touch and slide the Whisper Notification button to ON.
Quick Composer
Set your phone to display the Quick Composer menu when you slide open the QWERTY
keyboard. Quick Composer allows you to quickly send a message, post to Facebook or Twitter,
or create a Calendar event or Notepad entry.
1. Touch
> Main Menu > (slide the screen up) > Settings > Display.
2. Touch and slide the Quick Composer button to ON.
Volume Settings
Adjust your phone’s volume settings to suit your needs and your environment.
Incoming Ringer
Playback Volume
Power Up/Down
Key Beeps
Incoming Ringer
Adjust the volume of the ringer for incoming calls.
1. Touch
> Main Menu > (slide the screen up) > Settings > Volume.
2. Select Incoming Ringer.
3. Touch a level bar to set the volume, or select Silence All, Vibrate All, Ringer Off, or
1 Beep.
Phone Settings
40
4. Toggle the VIBRATE setting. (Note: This toggle key is not available when Silence All
or Vibrate All is selected.)
5. Touch Done.
Tip:
You can adjust the ringer volume in any screen (or the earpiece volume during a call) by
using the Volume Keys on the left side of your phone.
Playback Volume
Adjust the volume of Voice memo.
1. Touch
> Main Menu > (slide the screen up) > Settings > Volume.
2. Select Playback Volume.
3. Touch a level bar to set the volume, or touch
level you want.
or
repeatedly to reach the volume
4. Touch Done.
Power Up/Down
You can choose whether or not your phone sounds while you are powering up or down.
1. Touch
> Main Menu > (slide the screen up) > Settings > Volume.
2. Toggle the Power Up/Down button between ON or OFF.
Key Beeps
Your phone offers a number of options for selecting the audible tones accompanying a keypress.
1. Touch
> Main Menu > (slide the screen up) > Settings > Volume > Key Beeps.
2. Select an option.

Tone Length to select a key tone length. (During a call, longer tone lengths may be
better for tone recognition when dialing voicemail or other automated systems.)

Tone Volume to select a keypress volume level.

Tone Type to select the sound of a keypress.
Ringers
Ringer settings help you identify incoming calls and messages. You can assign ringer types to
individual Contacts entries, types of calls, and types of messages.
Phone Settings
41
Incoming Calls
Your phone provides a variety of ringer options that allow you to customize your ring and
volume settings. These options allow you to identify incoming calls by the ring.
1. Touch
Calls.
> Main Menu > (slide the screen up) > Settings > Ringers > Incoming
2. Touch Contacts, Unsaved Numbers, or Private/ Unknown. For Contacts, touch the
following:

Contacts with Default Ringer: You can set a ringer type for calls from contacts with
default ringer.

One Contact: You can set a specific ringer type for calls from one specific contact.
3. Select a category, and then scroll through the available ringers. Touch
sample ringer.
to hear a
4. Touch a ringer to assign it.
Assign Ringers to Contacts
1. Touch
> Main Menu > (slide the screen up) > Settings > Ringers > Incoming
Calls > Contacts > One Contact.
2. Touch a contact entry.
3. Select a category, and then scroll through the available ringers. Touch
sample ringer.
to hear a
4. Touch a ringer to assign it.
Get New Ringers
A wide variety of new ringers are available, and you can access them right from your phone.
(Additional charges may apply, but some are free.)
1. Touch
> Main Menu > (slide the screen up) > Settings > Ringers > Incoming
Calls, Voicemail, Messages, or Alarm/Calendar.
2. Select a call or message type to display a list of ringer type categories (if necessary).
3. Select Downloaded Ringers > Get New. The browser starts and displays the Ringers
menu.
4. Scroll through available ringers. When you find one you want, touch it.
Phone Settings
42
5. To make a purchase, touch Buy Ringtone. Your phone automatically downloads the
ringer.
6. When the download is finished, select an option to continue:

Listen to listen to the ringer.

Assign As to finish assigning the ringer.

Shop to browse for other items to download.
Call Alerts
Set your phone to alert you with an audible tone when you change service areas, once a minute
during a voice call, or when a call has been connected or dropped.
1. Touch
> Main Menu > (slide the screen up) > Settings > Ringers > Call Alerts.
2. Toggle the Beep Each Minute, Out of Service, Connect, or Signal Fade/Call Drop
buttons between ON and OFF.
Voicemail
You can select from a variety of ringers to alert you to voicemail messages.
1. Touch
> Main Menu > (slide the screen up) > Settings > Ringers > Voicemail.
2. Select a category and then scroll through the available ringers. Touch
sample ringer.
to hear a
3. Touch a ringer to assign it.
Messages
You can select ringer types for your messages.
1. Touch
> Main Menu > (slide the screen up) > Settings > Ringers > Messages.
2. Select a category and then scroll through the available ringers. Touch
sample ringer.
3. Touch a ringer to assign it.
Alarm/Calendar
You can select ringer types for your alarm and calendar.
1. Touch
> Main Menu > (slide the screen up) > Settings > Ringers >
Alarm/Calendar .
Phone Settings
43
to hear a
2. Select a category and then scroll through the available ringers. Touch
sample ringer.
to hear a
3. Touch a ringer to assign it.
Power Up/Down
Select the ringer you hear when the phone is turned on or off.
1. Touch
> Main Menu > (slide the screen up) > Settings > Ringers > Power
Up/Down.
2. Touch a ringer to assign it.
Vibration Settings
You have the option of setting your phone to vibrate only, or to vibrate with a ringer.
To set your phone to vibrate instead of making any sounds:
► Press the Volume Keys down until you see “Vibrate All” on the screen and touch Done.
To set your phone to vibrate in addition to any ringer settings:
1. Press the Volume Keys up or down until a Volume Level appears on the screen.
2. Touch and slide the VIBRATE setting to ON. (Note: This toggle key is not activated
when Silence All or Vibrate All is selected.)
To select the vibrate type:
1. Touch
> Main Menu > (slide the screen up) > Settings > Vibration.
2. Select Incoming Calls, Voicemail, Messages, Alarm/ Calendar. For Incoming
Calls, you can assign to Contacts, Unsaved Numbers, and Private/Unknown.
3. Scroll through the available vibrate types. Touch
to sample a vibrate type.
4. Touch a vibrate type to select it.
Silence All
The Silence All option allows you to mute all sounds without turning your phone off.
To activate Silence All:
► Press the Volume Keys down until you see “Silence All” on the screen and touch Done.
To deactivate Silence All:
Phone Settings
44
► Press the Volume Keys up repeatedly to select a volume level.
Text Entry Settings
You can specify more automated features in the predictive text entry mode. These options can
help streamline the text entry process by expanding the word database and completing the most
commonly used words for you.
1. Touch
> Main Menu > (slide the screen up) > Settings > Text Entry.
2. Toggle the Word Complete, Next Word Complete, or Word Scan buttons between
ON and OFF.

Word Complete to set the phone to complete a word after entering a preset number
of characters.

Next Word Complete to set the phone to predict possible word candidates after you
have entered a preset number of characters.

Word Scan to automatically update the word database with new words from
incoming messages.
Phone Info
The Phone Info menu lets you access various phone information such as your phone number
and Username, software version, icon glossary, memory information, and your account
information.
Display Your Phone Number
Touch
> Main Menu > Settings > Phone Info > Phone#/User ID. Your phone number and
other information about your phone and account will be displayed.
Lock Phone Settings
You can customize your phone to meet your personal security needs by entering your lock code
to change the security settings.
Tip:
If you can’t recall your lock code, try using the last four digits of your wireless phone
number. If this doesn’t work, contact your wireless service provider.
When your phone is locked, you can only receive incoming calls or make calls to 911 or special
numbers. (See Parental Controls.)
Phone Settings
45
Lock Your Phone
1. Touch
> Main Menu > (slide the screen up) > Settings > Lock Phone and enter
your lock code. Please note that you will be asked if you want to change or keep the
default lock code the first time you access this menu.
2. Touch Lock Now.
Unlock Your Phone
1. From standby mode, touch Unlock.
2. Enter your lock code.
Change the Lock Code
1. Touch
> Main Menu > (slide the screen up) > Settings > Lock Phone and enter
your lock code.
2. Touch Change Lock Code and then enter and reenter your new lock code.
Tip:
To access the Change Lock Code menu, you can also Touch
> Main Menu > (slide
the screen up) > Settings > Reset/Delete and enter your lock code. Then select
Change Lock Code.
Call in Lock Mode
You can place calls to 911 and to your special numbers when in lock mode. (For information on
special numbers, see Parental Controls.)
► To call an emergency number or a special number, touch Dialer, enter the phone
number, and then touch Talk.
Parental Controls
Parental Controls give you a convenient way to manage wireless usage and access for
everyone on your account. Kids get stylish phones to keep connected with friends and family,
while you can control Internet access, texting, content purchases, voice calls and camera use.
To activate the Parental Control feature:
1. Touch
> Main Menu > (slide the screen up) > Settings > Parental Controls.
2. Touch and slide the Parental Control button to ON and then enter and re-enter a new
parental lock code.
3. Select Restriction. You will see a disclaimer.
4. Read the disclaimer and touch Continue.
Phone Settings
46
5. Touch and slide the button to On for each option you want to set below:

Voice Call to set call restrictions.

Messaging to restrict messaging.

Web to restrict Web access, including other applications using data network.

Camera/Camcorder to restrict camera and camcorder usage.

Force Location On to force the phone not to turn off the location mode.
Call Setup
Your phone's call setup options include setting your phone to auto-answer, as well as
abbreviated dialing and Contacts Match options.
To activate the Contacts Match feature:
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Call Setup.
2. Touch and slide the Contacts Match button to ON.
To activate the Prefix feature:
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Call Setup.
2. Touch and slide the Abbreviated Dialing button to ON.
3. Enter the first five- or six-digit prefix in the Prefix field and then touch OK.

Tip:
To deactivate this feature, select Off during step 2 above.
To make an Abbreviated Dial call, see Abbreviated Dialing.
Note: Abbreviated Dialing does not apply to 911.
Auto-Answer Mode
Set your phone to automatically pick up incoming calls when connected to an optional handsfree car kit.
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Call Setup > Auto-Answer.
2. Touch an option.

Off to disable Auto-Answer.
Phone Settings
47

Headset to answer calls automatically when the phone is connected to an optional
headset. Remember, your phone will answer calls in Auto- Answer mode even if you
are not present.
TTY
A TTY (also known as a TDD or Text Telephone) is a telecommunications device that allows
people who are deaf, hard of hearing, or who have speech or language disabilities, to
communicate by telephone.
Your phone is compatible with select TTY devices. Please check with the manufacturer of your
TTY device to ensure that it is compatible with digital cell phones. Your phone and TTY device
will connect via a special cable that plugs into your phone’s headset jack. If this cable was not
provided with your TTY device, contact your TTY device manufacturer to purchase the
connector cable.
When establishing your wireless service, please call your wireless service provider via the state
Telecommunications Relay Service (TRS) by first dialing 7-1-1 and touching Talk .
To turn TTY Mode on or off:
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
TTY. You will see an informational message.
2. Touch Continue.
3. Touch On to turn TTY mode on.
– or –
Touch Off to turn TTY mode off.
Note: In TTY Mode, your phone will display the TTY access icon when the TTY device is
plugged into the phone.
Note: When enabled, TTY mode may impair the audio quality of non-TTY devices connected
to the headset jack.
WARNING:
911 Emergency Calling
It is recommended that TTY users make emergency calls by other means,
including Telecommunications Relay Services (TRS), analog cellular, and
landline communications. Wireless TTY calls to 911 may be corrupted when
received by public safety answering points (PSAPs), rendering some
communications unintelligible. The problem encountered appears related to
software used by PSAPs. This matter has been brought to the attention of the
FCC, and the wireless industry and the PSAP community are currently working to
resolve this.
Phone Settings
48
Airplane/Music Mode
Airplane Mode allows you to use many of your phone’s features, such as Games, Notepad, and
Voice Memos, when you are in an airplane or in any other area where making or receiving calls
or data is prohibited. When you set your phone to Airplane Mode, it cannot send or receive any
calls or access online information.
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Airplane/Music Mode.
2. Read the disclaimer and touch Continue.
3. Select On, Off, or On Power Up.
Data Settings
You can disable data services without turning off your phone; however, you will not have access
to all data services, including Web. Disabling data services will avoid any charges associated
with these services. While signed out, you can still place or receive phone calls, check voicemail,
and use other voice services. You may enable data services again at any time.
To disable data services:
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Data > On/Off. You will see a message.
2. Touch Disable to confirm that you want to disable data services.
To enable data services:
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Data > On/Off. A message is displayed.
2. Touch Enable to enable data services.
Net Guard
When you first connect to the Web, the Net Guard will be displayed to confirm that you want to
connect. This feature helps you avoid accidental connections. You can disable the Net Guard in
the future by selecting Always Auto-Connect when the Net Guard is displayed.
To change your Net Guard settings:
► Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Data > Net Guard.

Touch and slide the Net Guard button to ON to activate it.

Touch and slide the Net Guard button to OFF to deactivate it.
Phone Settings
49
Update Profile
If you have changed your user name and selected a new one online, you must then update the
user name on your phone.
► Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Data > Update Profile. To cancel, touch Cancel before completing the update.
Headset Mode
You can choose the headset mode between Normal mode and Discreet mode.
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Headset Mode.
2. Touch Normal or Discreet.
Language (Idioma)
You can choose to display your phone’s on-screen menus in English or in Spanish.
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Language (Idioma).
2. Touch English or Español.
Location Settings
Your phone is equipped with a Location feature for use in connection with location-based
services.
The Location feature allows the network to detect your position. Turning Location off will hide
your location from everyone except 911.
Note: Turning Location on will allow the network to detect your position using GPS technology,
making some applications and services easier to use. Turning Location off will disable
the GPS location function for all purposes except 911, but will not hide your general
location based on the cell site serving your call. No application or service may use your
location without your request or permission. GPS-enhanced 911 is not available in all
areas.
To enable or disable your phone’s Location feature:
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Location. You will see the Location disclaimer.
2. Read the disclaimer and touch Continue.
3. Touch On or Off to change the existing Location setting.
Phone Settings
50
When you turn the Location feature on, the phone displays the
off, the phone displays the
icon. When you turn Location
icon.
While in Airplane Mode, your phone’s standby screen will display “Phone off.
Roaming
Your display screen always lets you know when you’re roaming off the home network. Anytime
you are roaming, the phone displays the roaming icon ( ). If you are roaming on a digital
system, you will see the roaming icon along with the text – Digital Roam – .
Tip:
Remember, when you are using your phone off the home network, always dial numbers
using 11 digits (1 + area code + number).
Roaming on Other Digital Networks
When you’re roaming on digital networks, your call quality and security will be similar to the
quality you receive when making calls on the home network. However, you may not be able to
access certain features, such as data services, depending on the available network.
Note: If you’re on a call when you leave the home network, your call is dropped. If your call is
dropped in an area where you think network service is available, turn your phone off and
on again to reconnect to the network.
Check for Voicemail Messages While Roaming
When you are roaming off the home network, you may not receive on-phone notification of new
voicemail messages. Callers can still leave messages, but you will need to periodically check
your voicemail for new messages if you are in a roaming service area for an extended period of
time.
1. Dial 1 + area code + your phone number.
2. When you hear your voicemail greeting, press
.
3. Enter your passcode at the prompt and follow the voice prompts.
When you return to the home network, voicemail notification will resume as normal.
Set Roam Mode
Your phone allows you to control your roaming capabilities. By using the Roaming menu option,
you can determine which signals your phone accepts.
Choose from two different settings on your dual-band phone to control your roaming experience.
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Roaming > Roaming Mode.
Phone Settings
51
2. Touch an option.

Automatic to seek service on the home network. When wireless service is
unavailable, the phone searches for an alternate system.

Home Only to access only the home network and prevent roaming on other
networks.
Call Guard
Your phone has two ways of alerting you when you are roaming off the home network: the onscreen roaming icon and Call Guard. Call Guard makes it easy to manage your roaming by
requiring an extra step before you can place or answer a roaming call. This additional step is not
required when you make or receive calls while on the home network.
To turn Call Guard on or off:
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Roaming > Roaming Guards.
2. Toggle the Domestic Voice and International Voice buttons between ON or OFF.
Note: Call Guard is turned on by default on your phone.
Voice dialing and speed dialing are not available when you are roaming with Call Guard
enabled.
To place roaming calls with Call Guard on:
1. Press
, dial 1 + area code + the seven-digit number and touch Talk.
2. Read the disclaimer and touch Yes.
To answer incoming roaming calls with Call Guard on:
1. Touch Talk. A message will be displayed notifying you that roaming charges will apply.
2. Touch Yes.
Note: If the Call Guard feature is set to On, you need to take extra steps to make and receive
roaming calls.
Data Roam Guard
Depending on service availability and roaming agreements, your phone may be able to access
data services while roaming on certain digital systems. You can set your phone to alert you
when you are roaming off the home network and try to use data services such as messaging.
Note: Data Roam Guard is turned on by default on your phone.
To set your Data Roam Guard notification:
Phone Settings
52
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Roaming > Roaming Guards.
2. Toggle the Domestic Data and International Data buttons between ON and OFF.
To use data services when Data Roam Guard is active:
► When a pop-up notification appears informing you that data roam charges may apply,
touch Roam to connect.
Reset/Delete
You can quickly erase all the content you have created or stored in your phone.
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Reset/Delete and enter your lock code.
2. Select Delete Stuff.
3. Touch an option.

Messages to delete all messages.

Call Logs to delete all call logs.

Browser Cookies and Cache to delete the browser’s cookies and cache.

Downloaded Content to delete all the contents you have downloaded.

Contacts to delete all the contents of your Contacts list.

My Photos & Videos to delete all pictures and videos in My Photos & Videos.

Voice Memo to delete all voice memos.

Shortcuts to delete the menus you added on the home screen.
4. Touch Delete to confirm the deletion
Reset Default Settings
Resetting the phone to default settings restores all the factory defaults, including the ringer
types and display settings. The Contacts, Call History, Calendar, and Messaging are not
affected.
To reset default settings:
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Reset/Delete and enter your lock code.
Phone Settings
53
2. Select Reset Settings. You will see a disclaimer.
3. Read the disclaimer and if you are certain that you would like to restore all the factory
settings, touch Reset.
Reset Your Phone
Resetting the phone restores all the factory defaults, including the ringer types and display
settings. The Contacts, history, Scheduler, and Messaging items will be deleted.
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Reset/Delete and enter your lock code.
2. Select Reset Phone.
3. If you are certain that you would like to restore all factory settings, touch Reset.
Change Lock Code
1. Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Reset/Delete and enter your lock code.
2. Touch Change Lock Code and then enter and reenter your new lock code.
Tip:
To access the Change Lock Code menu, you can also Touch
> Main Menu > (slide
the screen up) > Settings > Lock Phone and enter your lock code. Then select Change
Lock Code.
Phone Settings
54
Contacts
The Contacts application lets you add and edit contacts, assign speed dial numbers, assign
ringers and pictures to entries, and use Hello UI.
Add a New Contacts Entry
Save a Phone Number
Contacts Entry Options
Edit a Contacts Entry
Add a Number to a Contacts Entry
Edit a Contacts Entry’s Numbers
Assign Speed Dial Numbers
Select a Ringer Type for an Entry
Assign a Picture to an Entry
Create a Group
Find Contacts Entries
Secret Contacts Entries
Hello UI
Add a New Contacts Entry
Your phone can store up to 600 Contacts entries. Contacts entries can store up to a total of 7
phone numbers, and each entry’s name can contain 64 characters.
1. From standby mode, touch
> Contacts.
2. Touch Add New > New Contact.
3. Touch the Enter Name field, enter the new contact name using the touch keypad or
QWERTY keyboard and then touch Done.
4. Touch the Add Number field, enter a phone number, and then touch Done.
5. Touch a phone label to select it (Mobile, Home, Work, Pager, Fax, or Other).
6. Scroll down to additional fields and enter or edit information as desired.
Contacts
55
7. Touch Done to save the entry.
After saving the number, your phone display the Contacts list. (See Contacts Entry Options.)
Save a Phone Number
You can save a phone number to Contacts directly from the phone dial pad.
To save a number from standby mode:
1. Press
to display the dial pad.
2. Enter a phone number.
3. Touch Save.
4. Touch New Entry for a new contact or Existing Entry to add a number to an existing
contact.
5. Touch a phone label to select it (Mobile, Home, Work, Pager, Fax, and Other).
6. Touch the Enter Name field, enter the new contact name using the touch keypad or
QWERTY keyboard, and then touch Done.
– or –
Search an existing contact name and touch it to save the new number.
7. Touch Done to save the new entry.
Contacts Entry Options
Once you've stored a Contact entry, you can add details such as phone numbers, add email
addresses, URL, default ringers, postal address, or even the contact's birthday.
To display a Contacts entry:
1. From standby mode, touch
> Contacts.
2. Touch an entry and then touch Contact Details.
3. Touch Edit on the top right corner of the screen. Touch one of the following available
fields to enter information.

Add Number to add a phone to the entry.

Add Email to add an email address to the entry.

Add URL to add a website’s URL to the entry.

Default Ringer to assign a preprogrammed or downloaded ringer.
Contacts
56

Default Vibrate Type to assign a vibration type for incoming calls from the contact.

Enter Address to add an address.

Enter Birthday to add a birthday.

Enter Memo to add a note or other information.

Enter Job Title to add a job title.

Enter Company to add a company.

No Secret/Secret to change to Secret to hide an entry’s phone number(s).
Edit a Contacts Entry
Editing a Contact's entry is quick and easy.
1. Display a Contacts entry (see Contacts Entry Options.) and touch Edit on the top right
corner of the screen.
2. Highlight the information you wish to edit (Name, Ringer, etc.).
3. Add or edit the information and touch Done (if applicable).
4. Touch Done to save your changes.
Add a Number to a Contacts Entry
You can add up to seven phone numbers to a Contact entry.
1. Display a Contacts entry. (See Contacts Entry Options.)
2. Touch Edit on the top right corner of the screen and then touch the Add Number field.
3. Enter the new phone number and touch Done.
Note: To add a pause, touch Pause and enter additional numbers.
4. Touch a label for the number.
5. Touch Done to save the new number.
Edit a Contacts Entry’s Numbers
Edit a contact entry's phone numbers using the edit option.
1. Display a Contacts entry (see Contacts Entry Options.) and touch Edit on the top right
corner of the screen.
2. Touch a number.
Contacts
57
3. Touch
to clear one digit at a time or touch and hold
to erase the entire number.
4. Re-enter or edit the number and touch Done.
5. Touch Done to save the number.
Assign Speed Dial Numbers
Your phone can store up to 98 phone numbers in speed dial locations. (For details on how to
make calls using speed dial numbers, see Speed Dialing.)
To assign a speed dial number to an existing phone number:
1. From standby mode, touch
> Contacts.
2. Touch More > Settings > Speed Numbers.
3. Touch an available speed dial location.
Note: To move to far below, touch the scroll thumb tag and drag to the desired location
4. Touch a contact and select a phone number if necessary. A confirmation is displayed.
To replace an already in-use speed dial location with a new phone number:
1. From standby mode, touch
> Contacts.
2. Touch More > Settings > Speed Numbers.
3. Touch a speed dial location to replace.
Note: To move to far below quickly, touch the scroll thumb tag and drag to the desired location.
4. Touch Replace and select the new phone number. (A confirmation is displayed.)
Note: To delete the speed dial number assigned, touch the speed dial location and select
Remove.
Find Speed Dial Numbers
1. From standby mode, touch
> Contacts.
2. Touch More > Settings > Speed Numbers.
3. Scroll through speed dial entries. Speed dial numbers are displayed in numeric order.
– or –
Enter the number of a speed dial location using your keypad.
Contacts
58
4. To display an entry, touch it.
5. To dial the entry, touch Call.
Select a Ringer Type for an Entry
Assign a ringer type to a Contacts entry so you can identify the caller by the ringer type. (See
Ringers.)
1. Display a Contacts entry (see Contacts Entry Options.) and touch Edit on the top right
corner of the screen.
2. Slide the screen up and touch the current ring type to display the Ringer menu.
3. Select a ringer menu, such as Default Ringer, Downloaded Ringers, Other Ringers,
No Ringer, My Videos, Voice Memo, My Audio or Assigned Media.
4. Scroll through available ringers. To hear a sample ringer, touch
.
5. Touch a ringer to select it.
6. Touch Done to save the new ringer type.
Assign a Picture to an Entry
Assign a picture to display each time a certain contact calls you.
1. Display a Contacts entry (see Contacts Entry Options) and touch Edit at the top right
of the screen.
2. Touch an entry’s current image or placeholder to display the Picture ID menu.
3. Select an option, such as No Image, Take New Picture, My Photos, Downloaded
Images, or Assigned Media.
4. Touch a picture and touch Assign to assign it.

If you selected Take New Picture, the camera will launch so that you can take a new
picture. (See Take Pictures for details.)

If you selected My Photos, you may need to select In Phone or Memory Card to
find the picture you want to use.
5. Touch Done to save the assigned picture.
Create a Group
Create a group to send a message to the members of a group at the same time. Created groups
also will be shown in Contacts in alphabetical order.
Contacts
59
1. From standby mode, touch
> Contacts.
2. Touch Add New and select New Group.
3. Touch each member to assign to the group. When multiple phone numbers or email
addresses are saved for a Contacts entry, touch the phone number or email address
you wish to associate with that entry.
4. After selecting all members, touch Continue.
5. Touch the Enter Group Name field, enter a name for the new group, and then Done.
6. Touch Done once more to save the group.
Find Contacts Entries
Use the search tool to find contact entries by name or by group.
Find Contacts by Name
1. From standby mode, touch
> Contacts.
2. Scroll through all of the entries.
– or –
To quickly move up or down in the list alphabetically, touch and hold the thumb tab on
the right side and drag to an initial letter.
– or –
Touch
and enter the first letter or letters of a name (such as “day” for “Dave”). The
more letters you enter, the more your search narrows.
3. To display an entry, touch it.
4. To dial the entry’s default phone number, touch Call.
– or –
To close the entry display, touch the entry again.
Find Group Entries
1. From standby mode, touch
> Contacts.
2. Scroll through the Contacts list. To display entries belonging to a group, touch the
group and then Group Details.
Contacts
60
Secret Contacts Entries
You can designate a contact entry as Secret and, if you choose, hide it from the Contacts list.
When you set to hide secret contact entries, they will not be shown in the Contacts list.
To make an entry secret:
1. From standby mode, touch
> Contacts.
2. Display a contact and then touch Contact Details.
3. Touch and slide the Secret switch to ON.
4. Press
to go back to Contacts list.
5. Touch More > Settings > Hide Secret.
6. Enter the lock code to hide the contact entries set as secret.
To make an hidden entries public:
1. On the Contacts list, touch More > Settings > Show Secret.
2. Enter the lock code. The contact will reappear on your contacts list.
Hello UI
Add your favorite contacts to groups that you can access quickly with a few keystrokes. You can
create up to four groups with six members in each group.
Customize Hello UI
1. From standby mode, press
2. Touch
and touch
.
to add a contact.
3. Touch each contact you want to assign to the group.
4. After making your selections, touch Done.
To change to a seasonal theme:
1. While in the Hello UI screen, touch Settings at the top right corner of the screen and
touch Theme. The following options are available.

Touch and slide the Auto Theme button to ON to allow automatic updating to the
theme.

Touch Theme and use the arrows to scroll through the themes.
Contacts
61
2. Touch Done.
Hello UI Contacts Options:
► Touch a Contact on Hello UI.
Send a Message to Selected Group Members
1. From standby mode, press
and touch
.
2. Using your finger, draw a line around the group members you wish to include.
3. Touch the envelope icon (for example,
many members were included).
-- the number on the icon shows how
4. Touch the text field to enter a message or use the preset messages, symbols, smileys,
or emoticons.

To type a message, use the QWERTY keyboard or touch keypad. (See Entering
Text.)

To use a preset message, touch Preset Msgs in the upper right corner and then
touch a message to enter.

To enter a symbol, an emoticon, or a smiley:
•
On the touch keypad: touch Abc and select Symbols, Emoticons, or Smileys.
Touch a desired symbol, emoticon, or smiley. (See Enter Numbers, Symbols,
Emoticons, Smileys and Preset Messages.)
– or –
Contacts
62
•
On the QWERTY keyboard: press
and touch a desired symbol or emoticon.
(See Enter Text With the QWERTY Keyboard.)
5. Touch Done.
6. To add attachments, touch Add Attachment for the available options.
7. Review your message and touch Send. You may select additional messaging options
by touching More to add subject, set the message priority urgent, set the callback
number, or save it as draft.
Note: If an attachment or subject is added to a text message, the message type will change to
Picture Message and you will be charged accordingly. (See Send Pictures and Videos
From Messaging.)
Contacts
63
Accounts and Messaging
With wireless service and your phone's messaging capabilities, you can always stay in touch
through messaging, email, and social networking accounts.
Text Messaging and MMS
Email
Social Networking
Text Messaging and MMS
With your phone’s messaging features, you can send and receive instant text messages (SMS),
or multimedia messages (MMS) that can include video and audio, between your wireless phone
and another messaging-ready phone. When you receive a new message, it will automatically
display a notification on your phone’s screen.
In addition, text messaging includes a variety of preset messages, such as “Call me” and “I have
to work late” that make composing messages fast and easy. Use your phone to customize your
own preset messages (up to 100 characters).
Note: See your service plan for applicable charges for text messaging.
Compose Text/Picture Messages
These instructions explain how to compose text and picture messages on your phone.
1. Slide the keyboard out and touch Message.
– or –
Touch
> Send Message.
2. Select an entry method:

New Addr to use the keypad or QWERTY keyboard enter a wireless phone number
or email address of the recipient directly.

Go to Contacts to select a recipient from your Contacts. (Qualifying Contacts entries
must contain a wireless phone number or an email address.)
3. Touch Continue when you have finished entering recipients. (You may include up to
40 recipients per message.)
4. Enter a message or use the preset messages, symbols, smileys, or emoticons.
Accounts and Messaging
64

To type a message, use your QWERTY keyboard or touch keypad to enter your
message. (See Entering Text.)

To use a preset message, touch Preset Msgs in the upper right corner and then
touch a message to enter.

To enter a symbol, an emoticon, or a smiley:
•
On the touch keypad: touch Abc and select Symbols, Emoticons, or Smileys.
Touch a desired symbol, emoticon, or smiley. (See Enter Numbers, Symbols,
Emoticons, Smileys and Preset Messages.)
– or –
•
On the QWERTY keyboard: press
and touch a desired symbol or emoticon.
(See Enter Text With the QWERTY Keyboard.)
5. To add attachments, touch Add Attachment.
6. Review your message and touch Send. You may select additional messaging options
by touching More to add subject, set the message priority urgent, set the callback
number, or save it as draft.
Note: If an attachment is added to a text message, it will be automatically convert to Picture
Message and you will be charged accordingly. (See Send Pictures and Videos From
Messaging.)
Access Text/Picture Messages
Accessing text or picture messages on your phone is as simple as touching the notification
bubble on your screen.
To read an SMS/MMS message:
► When you receive a text/picture message, you will see a notification bubble on your
phone’s screen. Touch the bubble to see the entire message.
To reply to a text/picture message:
1. While the message is open, touch Reply.
2. Follow steps 4-6 under Composing Text/Picture Messages to complete and send your
reply.
Messaging Settings
Messaging settings allow you to decide how you would like to be notified of new messages, to
create a signature with each sent message, and to create your own preset messages.
Accounts and Messaging
65
Callback Number
1. Touch
> Main Menu > Messaging > Settings > Callback Number.
2. Select None, My Phone Number, or Other. (If you select Other, enter a number and
touch Save.)
Manage Preset Messages
Your phone is loaded with 20 preset messages to help make sending text messages easier.
Customize or delete these messages, such as “Where are you?,” “Let’s get lunch,” and “Meet
me at” to suit your needs, or add your own messages to the list. To edit or delete a preset
message:
1. Touch
> Main Menu > Messaging > Settings > Preset Messages. You will see
the list of preset messages.
2. Touch a message you want to edit or delete.
3. Touch Edit, edit the message (see Entering Text), and touch Save.
– or –
Touch Delete to delete the message. Touch Cancel to cancel the deletion.
Note: To delete multiple messages, touch Delete on the top right corner of the screen when
the list of preset messages displays. Then select Delete Multiple or Delete All.
To add a new preset message:
1. Touch
> Main Menu > Messaging > Settings > Preset Messages. You will see
the list of preset messages.
2. To add a new message, touch Add New.
3. Enter your message and touch Save. Your new message will be added to the
beginning of the list.
To Add a Customized Signature
You can add a customized signature to each message you send.
1. Touch
> Main Menu > Messaging > Settings > Signature.
2. Select Custom. (If you do not wish to attach a signature, select None.)
3. Enter a signature and touch Save.
Accounts and Messaging
66
Email
Your phone’s email application lets you access and manage multiple email accounts
simultaneously in one convenient location.
Get Started With Email
Use your phone's Email setup wizard to set up your email account on your phone.
1. Touch
> Main Menu > Messaging > Email. The Email setup wizard will start.
2. Touch NEXT to continue.
3. Touch Email and select an email provider (such as AOL® Mail, AIM® Mail, Hotmail,
Yahoo! ® Mail, or Gmail®) and touch NEXT.
– or –
Select Work to set up a corporate email account using either Outlook Web Access
from a Microsoft Exchange Server or the Mobile Email connector for direct access.
– or –
Select More to choose from additional options. There are many available email
options listed, or you may add your own POP or IMAP email accounts.
Note: Work Email Setup: Consult your company’s IT department for required information and
permissions for any Work email accounts. Read the on-screen setup instructions for
additional information about setting up and using Work email options on your phone.
4. Follow the setup wizard instructions to enter the required sign-up information. Touch
ACCEPT or CONTINUE if you are prompted to accept any license agreements or
disclaimers.
Note: The information required to sign in will vary depending on the email provider you are
accessing.
5. If applicable, read the notice regarding Mail Push. If you would like to enable Mail
Push, touch Yes. If another notice appears, review it and touch Yes again to enable
Mail Push.
Note: Mail Push allows your phone to automatically retrieve new email messages without
having to select the Check Mail option. When you enable Mail Push, you will receive an
on-screen notice of new email messages. These notices may be charged as text
messages. Please consult your service plan for details.
Access Email
Using Email on your phone is even easier than using multiple email accounts on your computer.
Launch the application for instant access to all your accounts.
Accounts and Messaging
67
1. Once you have set up your Email, touch
> Main Menu > Messaging > Email to
launch the application. You will see your default account inbox.
– or –
From an Email New Message notice (if you have enabled Mail Push), touch GO to go
to your inbox.
2. Use your keyboard and touch the corresponding keys to read, manage, and reply to
your email messages.

Touch Options to select messaging options, such as Compose, Sort, View Folders,
and Select All.

Touch Options > Compose to create new messages.

To view a different email account, touch the Email icon at the top left or right corner
of the current Inbox tab.

To add a new account, while viewing the inbox press
, touch Options, and then
select Add Account. Follow the instructions in Get Started With Email to set up a
new account.
Note: You can also access certain email accounts through the Home menu. Touch
> Main
Menu > Web and then select Sitemap > Email > [Yahoo! Mail, AOL & AIM Mail, or MSN
Hotmail.] Follow the on-screen instructions to enter your account information and access
your email messages.
Social Networking
Stay in touch on the go with all your social networking accounts. Post updates on Facebook and
Twitter.
To access Facebook:
► Touch
> Main Menu > Social Networking > Facebook.
To access Twitter:
► Touch
> Main Menu > Social Networking > Twitter.
Accounts and Messaging
68
Applications and Entertainment
Take advantage of the applications and entertainment possibilities of your phone, including
downloading games and ringers, TV and music, and GPS navigation.
Games, Ringers, and More
Music
Games, Ringers, and More
You have access to a dynamic variety of downloadable content, such as games, ringers, screen
savers, and other applications. (Additional charges may apply.)
Follow the basic steps below to access and download these items.
Access the Download Menus
1. Touch
> Main Menu > My Stuff.
2. Select a download category (Games, Ringers, Screen Savers, or Applications), and
then select Get New. The browser will start and take you to the corresponding
download menu.
Select an Item to Download
You can search for available items to download in a number of ways:
●
Featured displays a selection of featured items.
●
Categories allows you to narrow your search to a general category. There may be
several pages of available content in a list. Select Next 9 to view additional items.
●
Search allows you to use your keypad to enter search criteria to locate an item. You
may enter an entire word or title or perform a partial-word search.
Download an Item
Once you’ve chosen and highlighted an item, touch it to select it. You will see a summary page
for the item including its title, cost, and expiration date. Links allow you to view the Preview
page, to preview an item, Description page, which outlines the file size, description of the item,
the vendor, and its version, and the License Info page, which details the price, license type,
expiration, and terms of use.
To download a selected item:
Applications and Entertainment
69
1. From the information page, select Buy. The item will download automatically. When
you see the New Download screen, you have successfully downloaded the item to
your phone.
Note: If you have not previously purchased an item, you will be prompted to create your
purchasing profile.
2. Select an option to continue:

Select Listen/Use/Run/View to listen to a ringer, start a game or application, or view
a screen saver. Your data session will end, and you will be redirected to the
appropriate phone menu screen.

Select Assign As to assign a ringer or screen saver to a phone function.

Select Settings to configure downloaded games or applications.

Select Shop to browse for other items to download.

Press
to quit the browser and return to the Home menu.
Applications and Entertainment
70
Web and Data
This section addresses your device’s data connections and the built-in Web browser. Additional
data-related features can be found in Accounts and Messaging, Applications and
Entertainment, and Tools and Calendar.
Get Started With Data Services
Browser Menu
Get Started With Data Services
With your wireless service, you are ready to start enjoying the advantages of data services. This
section will help you learn the basics of using your data services, including managing your user
name, launching a data connection, and navigating the Web with your phone.
Your User Name
When you buy your phone and sign up for service, you’re automatically assigned a user name,
which is typically based on your name and 10-digit wireless phone number.
When you use data services, your user name is submitted to identify you to the home network.
Your user name will be automatically programmed into your phone. You don’t have to enter it.
Find Your User Name
If you aren’t sure what your user name is, you can easily find it on your phone.
► Touch
> Main Menu > (slide the screen up) > Settings > Phone Info >
Phone#/User ID.
Update Your User Name
If you choose to change your user name and select a new one online, you must then update the
user name on your phone.
► Touch
> Main Menu > (slide the screen up) > Settings > (slide the screen up) >
Data > Update Profile. To cancel, touch Cancel before completing the update.
Launch a Web Connection
You can launch your Web connection by touching the Web icon on your phone's main menu
screen.
► Touch
Web and Data
> Main Menu > Web. Your data connection starts and you see the home page.
71
Note: If Net Guard is enabled and displayed, touch CONNECT to continue and launch the
Web. For more information, see Net Guard.
While connecting, you may see an animation and a “Connecting” message.
Data Connection Status and Indicators
Your phone displays the current status of your data connection through indicators at the top of
the screen. The following symbols are used:
Your phone is connected to the high-speed Mobile Broadband Network (EVDO).
When the triangles are animated, data is being transferred (for example, when you are
opening a Web page). When the triangles are white, you are connected to the network
but data is not currently being transferred (for example, when you are viewing a Web
page that is completely open). In either state, you can receive incoming calls.
Your phone is on and is connected to the data network. When the arrows are animated,
data is being transferred (for example, when you are opening a Web page) and you
cannot receive calls. When the arrows are white, you are connected to the network but
data is not currently being transferred (for example, when you are viewing a Web page
that is completely open) and you can receive calls.
If you do not see an indicator, your phone does not have a current data connection. To launch a
connection, see Launch a Web Connection.
Navigate the Web
Navigating through menus and websites during a data session is easy once you’ve learned a
few basics. Here are some tips for getting around:
Scrolling
As with other parts of your phone’s menu, you’ll have to scroll up and down to see everything on
some websites.
To scroll line by line through websites:
► Touch and slide the screen up or down.
– or –
Touch and drag the scroll bar on the right of the screen.
Selecting
To select on-screen items:
► Touch a link and it will take you to that Web page. If you are using the QWERTY
keyboard, use the Navigation Keys to highlight a link and press
.
Web and Data
72
Links, which are displayed as underlined text, allow you to jump to Web pages, select special
functions, or even place phone calls.
To select links:
► Touch the linked text on your phone.
Going Back
To go back one page:
► Press the
on your phone.
Note: You can also use
on the QWERTY keyboard for deleting text (like a BACKSPACE
Key) when you are entering text.
Browser Menu
Although the home page offers a broad and convenient array of sites and services for you to
browser, not all sites are represented, and certain functions, such as going directly to specific
websites, are not available. For these and other functions, you will need to use the browser
menu. The browser menu offers additional options to expand your use of the Web on your
phone.
Open the Browser Menu
The browser menu may be opened anytime you have an active data session, from any page
you are viewing.
Options available under the browser menu include:
●
Back to go back to the previous Web page.
●
Forward to move to a previously viewed page (after having used Back option).
●
Pages to open a new page or view other opened pages.
●
●
Options to view your bookmarks, history, change your font size or other browser
settings.
Zoom button provide for ability to zoom in and zoom out.
Go to a Specific Website
To go to a particular website by entering a URL (website address):
1. Touch the URL field.
2. Use your keyboard to enter a website address and press
Web and Data
73
or touch DONE.
Note: Not all websites are viewable on your phone.
Restart the Web Browser
If the Web browser seems to be malfunctioning or stops responding, you can usually fix the
problem by simply restarting the browser.
1. Touch the browser menu.
2. Touch Options > Browser settings > Advanced > Reset browser.
3. Touch the options you want to reset, then touch Reset selected items if you still wish
to continue.
Web and Data
74
Camera and Video
You can use the camera or camcorder to take and share pictures and videos. Your device
comes with a 2.0 megapixel camera with an autofocus feature that lets you capture sharp
pictures and videos.
Take Pictures
Record Videos
Store Pictures and Videos
Send Pictures and Videos
Take Pictures
Taking pictures with your phone’s built-in camera is as simple as choosing a subject, pointing
the lens, and pressing a button.
1. Touch
> Main Menu > Photos & Videos > Camera to activate camera mode.
Additional camera options are available through the camera mode options menu. See
Camera Mode Options for more information.
Shortcut:
To activate camera mode, you can also press the Camera Key
press and hold the Camera Key
. (See illustration.)
twice, or
2. Using the phone’s display screen as a viewfinder, aim the camera lens at your subject.
3. Touch CAPTURE,
if the QWERTY keyboard is open, or press the Camera Key
until the shutter sounds. Your phone automatically saves the picture to the
default storage area.

To return to camera mode to take another picture, touch Take New Picture,
the QWERTY keyboard is open, or the Camera Key
.
4. Touch More or
if the QWERTY keyboard is open for more options:

Send to send your picture in a message. (See Send Pictures and Videos.)

Assign to assign the picture as a:
•
Main Screen to use the picture as a screen saver.
•
Picture ID to display the picture for all incoming calls.
•
Lock Screen to use the picture as a lock screen.
Camera and Video
75
if

Delete to delete the picture you just took.

Go to Album to go to the In Phone folder or Memory Card folder (if available) to
review your saved pictures.

Take New Picture to return to camera mode to take another picture.
Assign Pictures
After taking a picture, assign it as a screensaver or as a picture ID for a Contacts entry.
1. Take a picture. (See steps 1–3 in Take Pictures.)
2. With the displayed, touch More or

Main Screen to assign the picture as a screensaver. If the size of the picture is
larger than screen, you are required to select between Fit to Screen and Select
Area.

Picture ID to assign the picture as a Picture ID to a Contacts entry:

Tip:
> Assign, and select an option.
•
Contacts with No Picture to assign the picture to all contacts that don’t already
have an assigned picture ID
•
One Contact to assign the picture to a particular contact
•
Private/Unknown Numbers to assign the picture to incoming calls from
restricted or private numbers.
•
Unsaved Numbers to assign the picture for incoming calls from unsaved
numbers.
Lock Screen Follow the prompts to assign the picture IDs.
You can also assign pictures from the My Photos & Videos menu. See In Phone Folder
and microSD Card Options.
Camera Mode Options
While in Camera mode, your options include color tone, image controls, fun frames, and a selftimer. In Camera mode, touch
to display additional camera options:
●
Color Tone to adjust the color tone. Select Normal, Black & White, Negative, or Sepia.
(The default setting is Normal.)
●
Image Controls to select from the following options:

Brightness to select Auto or Manual brightness control. If you select Manual
brightness, move the scroll bar up (increase) or down (decrease) to select a setting.
Camera and Video
76

White Balance to adjust white balance based on changing conditions. Select from
Auto, Tungsten, Fluorescent, Sunny, Cloudy, or Manual. If you select Manual,
move the scroll bar left (decrease) or right (increase).
●
Fun Frames to take a picture in a fun frame. Touch a frame style at the bottom of the
screen to see how it will look full-screen; drag the screen left or right to see the next or
previous frame.
●
Settings to select Resolution, Quality, Shutter Sound, Status Bar, Night Mode or
Auto Review. (See Camera Settings for details.)
●
Self Timer to activate the camera’s timer. (See Self timer below.)
●
Zoom to zoom in on a subject. (Not available at the highest resolution, see Zoom.)
●
Go to Album to go to the In Phone folder or Memory Card folder (if available) to review
your saved pictures.
●
Camcorder Mode to switch to video mode. (See Record Videos.)
Self timer
1. From Camera mode, touch
- or From Camera mode, touch
> Self Timer.
.
2. Touch the length of delay you want the timer to use (Off, 5 seconds, or 10 seconds).
3. Touch START when you are ready to start the timer. A countdown is displayed in the
middle of the screen.
To cancel the Self-timer after it has started:
► Touch CANCEL.
Note: While the Self-timer is active, some of the touch keys are disabled.
Zoom
This feature allows you to zoom in on an object when you take a picture. Depending on your
resolution settings, you can adjust the zoom (15 levels).
1. From Camera mode, touch
> Zoom.
2. Move the gauge bar left (zoom out) or right (zoom in).
3. Touch CAPTURE,
if the QWERTY keyboard is open, or press the Camera Key
to take the picture. Your phone automatically saves the picture in your default
storage area.
Camera and Video
77
Note: Zoom is not supported when the Resolution setting is 2M(1600 x 1200).
Camera Settings
Customize the settings for your phone's camera.
1. From Camera mode, touch
> Settings.
2. Touch an option:

Resolution to select a picture’s file size (2M, High, Med, or Low).

Quality to select the picture quality setting (Fine, Normal, or Economy).

Shutter Sound to select a shutter sound (Shutter, Say Cheese, Ready 123, or
Smile ).

Status Bar to show or hide the Status Bar (On or Off).

Night Mode to toggle the low-light setting (On or Off).

Auto Review to select the Auto Review setting (On, On(for 2 Seconds), On(for 5
Seconds) or Off)
Record Videos
In addition to taking pictures, you can record, view, and send videos with your phone’s built-in
video camera.
1. Touch
> Main Menu > Photos & Videos > Camcorder to activate video mode.
Additional video options are available through the video mode options menu. See
Video Mode Options.
2. Select Video Mail or Long Video.
Note: Video Mail can be at most 30 seconds in length or 600KB in size, otherwise, they cannot
be uploaded, sent, or posted. but the length of a Long Video is dependent on both the
quality settings and storage type used (phone or memory card).
3. Using the phone’s display screen as a viewfinder, aim the camera lens at your subject.
4. Touch RECORD,
.

if the QWERTY keyboard is open, or press the Camera Key
To pause and then resume the recording, touch PAUSE (or
keyboard is open) and then touch RESUME (or
open).
Camera and Video
78
if the QWERTY
if the QWERTY keyboard is
5. Touch STOP,
if the QWERTY keyboard is open, or press the Camera Key
to
stop recording. Your phone automatically saves the video in your default storage area.
6. Touch More or
more options:
•
Play to play the video that was just recorded.
•
Assign to assign the video as a ringer.
•
Take New Video to return to camcorder mode.
•
Delete to delete the video that was just recorded.
•
Review My Videos to go to the In Phone folder or Memory Card folder (if
available) to review your saved videos.
•
Cancel to close the options menu.
OR
•
Send (only for Video Mail videos) to send the video. (See Send Pictures and
Videos From Messaging.)
Video Mode Options
While in Camcorder mode, you can choose from options such as color tone, image control,
brightness, and the self-timer. In Camcorder mode, touch
options:
to display additional camcorder
●
Color Tone to adjust the color tone from Normal, Black & White, Negative, and Sepia.
(The default setting is Normal.)
●
Image Controls to select from the following options:

Brightness to select Auto or Manual brightness control. If you select Manual, move
the scroll bar up (increase) or down (decrease) to select a setting.

White Balance to adjust white balance based on the different lighting conditions.
Select from Auto, Tungsten, Fluorescent, Sunny, Cloudy, or Manual (10 levels).
●
Settings to select Resolution, Quality, Cue Sound, Status Bar, Video Length or
Auto Review. (See Video Settings for details.)
●
Self Timer to activate the camcorder’s timer.
●
Zoom to zoom in on a subject. (See Zoom.)
●
Go to Album to go to the In Phone folder or Memory Card folder (if available) to review
your saved videos.
Camera and Video
79
●
Camera Mode to switch to camera mode. (See Take Pictures.)
Video Settings
Use the settings menu to quickly customize your phone's video settings.
1. From Camcorder mode, touch
> Settings.
2. Touch an option.

Resolution to select a video’s file size (WQVGA, Med, or Low).

Quality to select the video quality setting (Fine, Normal, or Economy).

Cue Sound to select a cue sound (Cue 1, Cue 2, or Cue 3).

Status Bar to show or hide the Status Bar (On or Off).

Video Length to select a video length (Video Mail or Long Video).

Auto Review to select the Auto Review setting (On, or Off)
Store Pictures and Videos
Your phone’s picture and video storage area is called My Photos & Videos. There are two
folders in My Photos & Videos:
●
In Phone
●
Memory Card
Storage Options
1. Touch
> Main Menu > Photos & Videos > Other Settings > Auto-Save to.
2. Select Memory Card or In Phone. The phone stores pictures to the In Phone folder if
no microSD card is installed.
In Phone Folder
Your phone’s internal storage area is called the In Phone folder. From the In Phone folder, you
can view all the pictures and videos you have stored there, delete files, and access additional
options.
To review your stored pictures and videos in the In Phone folder:
1. Touch
> Main Menu > Photos & Videos > My Photos & Videos > In Phone.
2. Scroll through the pictures and videos and touch a picture or video to view it.
Camera and Video
80
microSD Picture and Video Folders
You can save pictures and videos directly to the microSD card using your phone’s pictures and
videos settings. You can store and manage a maximum of 1,000 pictures in each folder on the
microSD card.
To review your stored pictures and videos on the microSD card:
1. Touch
> Main Menu > Photos & Videos > My Photos & Videos > Memory Card.
2. Scroll through the pictures and videos and touch a picture or video to view it.
In Phone Folder and microSD Card Options
After you open a picture or video in the In Phone folder or the Memory Card folder, touch More
to display the following options:
●
Select Multiple/ Select Single to select multiple or single pictures or videos to delete,
print (.JPG format pictures), copy, or move.
●
Thumbnail to display pictures in thumbnail view.
●
Play to play a selected video.
●
Slide Show to view your pictures in slideshow mode.
●
Assign to assign the picture as a screen saver or picture ID, or the video as a ringer.
●
Delete to delete the picture or video.
Note: Deleting pictures will free up memory space in your phone to enable you to take more
pictures.
●
Copy/Move to copy or move the picture or video to In Phone or Memory Card.
●
Media Filter to display the following options:

All to display all media.

Pictures to display only pictures.

Videos to display only videos.
●
Rename to rename a video.
●
Camera Mode/ Camcorder Mode to switch between camera and video mode.
●
Other Options (pictures only) to use the following options:

Edit to edit the picture using Flip, Zoom, Rotate, or Crop.
Camera and Video
81
●

Image Effects to apply one of eight available effects to the image.

Face Warp to detect a face in the picture, and apply one of the many fun face warp
effects.

Cancel to return to the previous menu.
Media Info to display information such as File Name, Model (pictures only), Taken,
Resolution, File Size, Quality (pictures only), and Location (for pictures only).
Send Pictures and Videos
Once you have taken a picture or a video, you can use the messaging capabilities of your
phone to instantly share it with family and friends. You can send a picture to up to 40 people at
a time using their email addresses or their wireless phone numbers.
Send Pictures and Videos From the In Phone Folder or Memory
Card
You can send pictures and videos from either the In phone folder or from your memory card
(microSD).
1. Touch
> Main Menu > Photos & Videos > My Photos & Videos > In Phone or
Memory Card.
2. Touch a picture or video to send.

To select multiple picture and videos, touch Multi Select on the top right corner of
the screen. Touch pictures or videos as many as you want.
3. Touch Send > Contact.
4. Select a phone number or an email address:

Touch New Addr to enter a mobile phone number or an email address directly.

Touch Go to Contacts to open the Contacts list and select a mobile phone number
or an email address.
Note: To send to multiple contacts, select your first contact during step 4 and touch the contact
again in the ‘Compose Message’ screen. Touch New Addr for direct input of a recipient
or touch Go to Contacts to select a recipient from your Contacts. Touch Continue
when you have finished entering recipients. (You may include up to 40 recipients per
message.)
5. To include a text message, enter your message using the QWERTY keyboard (or
touch Preset Msgs at the top right corner of the screen. (See Select a Text Input
Mode.)
Camera and Video
82
6. Touch More and select an option:

Add Subject to add a subject.

Mark as Urgent to mark the message as urgent.

Save as Draft to save it as a draft.
7. Confirm your recipients and attached data.
8. Touch Send to send the message.
Send Pictures and Videos From Messaging
You can also send pictures and videos from your phone’s Messaging menu.
1. Touch
> Send Message.
2. Select New Addr or Go to Contacts.

New Addr to enter a wireless phone number or an email address directly.

Go to Contacts to select recipients from your Contacts.
3. Touch Add Attachment.
4. Touch Picture or Video.

Take New to take a new picture or record a new video to attach to the message.

In Phone to select a picture or video stored in the phone.

Memory Card to select a picture or video stored on the microSD card.
5. To complete and send the message, touch Attach to select the picture or video, then
follow the steps 5-8 in Send Pictures and Videos From the In Phone Folder or Memory
Card.
Other Settings
The Other Settings menu allows you to view and configure your account information.
To access the settings and info menu:
1. Touch
> Main Menu > Photos & Videos > Other Settings.
2. Touch an option:

Auto-Save to to select where to save the pictures and videos. (Memory Card or In
Phone)

Status Bar to choose whether to display the Status Bar in preview mode.
Camera and Video
83

Location to choose whether to insert location info when you take a picture.

Slideshow Interval to select the time each picture will stay on-screen in a slideshow.
Camera and Video
84
Tools and Calendar
Learn how to use many of your phone's productivity-enhancing features.
Clock
Calendar
Bluetooth
Update Phone
Device Self Service
Mass Storage
Voice Service
Calculator
Notepad
Document Viewer
Clock
Your phone comes with a built-in alarm clock that has multiple alarm capabilities.
1. Touch
> Main Menu > (slide the screen up) > Tools > Clock > Alarm.
2. Touch Add New.
3. Touch and slide the alarm switch to ON.
4. Touch the time to set a time for the alarm.

Touch the digital clock (above the dial) to adjust the clock.
– or –

Touch and drag the hour and minute hands and then touch am/pm to select a time,
and then touch Done.
5. Touch Repeat to select a repetition type.

Touch Daily, Once, Weekly, Mon - Fri, or Sat & Sun.
6. Touch Sound/Vibration to select Always Sound & Vibrate, Always Sound, or
Always Vibrate.
Tools and Calendar
85
7. Touch Alarm Bell to select a ringer type.

Select a ringer menu and touch a ringer.
8. Touch Volume to select a ringer volume.

Touch the bar at the volume level you want and then touch Done.
9. Touch Vibration Type to select a vibration type.

Touch the desired vibration type.
10. Touch Snooze to select a snooze interval time.

Select Snooze 5mins, Snooze 10mins, Snooze 15mins, Snooze 20mins, or
Snooze Off.
11. Touch Save to set the alarm.
Calendar
Your Calendar helps organize your time and reminds you of important events.
Add an event to the calendar
1. Touch
> Main Menu > (slide the screen up) > Tools > Calendar.
2. Touch the day to which you would like to add an event and touch Add New. The
current day is the default.
3. Touch Time to select a time for the event. Slide the hour, minute, and am/pm wheel
up or down. Touch End and then set the end time and touch Done.

For an all-day event, touch All Day.
4. Touch Content to enter a notes about the event.

Enter a note or memo and touch Save.
5. Touch Related person to select contacts related to the event.

After selecting related persons in the Contacts list touch Done.
6. Touch Alarm to set an alarm time.

Select None, On time, 5 minutes, 10 minutes, 1 hour, 1 day, or 2 days and touch
Done.
7. Touch Alarm Bell to select a ringer type.

Select a ringer menu and touch a ringer.
Tools and Calendar
86
8. Touch Volume to select a ringer volume.

Touch the bar at the volume level you want and then touch Done.
9. Touch Location to enter a location.

Enter the event location and touch Save. (See Entering Text.)
10. Touch Set Repeat to select a repeating status.

Select None, Daily, Mon - Fri, Select Days, Weekly, Monthly, or Yearly and then
touch Done.
11. Touch Save to save the event.
Event Alert Menu
When your phone is turned on and you have an event alarm scheduled, your phone alerts you
and displays the event summary. There are several ways your phone can alert you to scheduled
events:
●
By playing the assigned ringer type.
●
By illuminating the backlight.
●
By flashing the LED.
To silence the alarm and reset the schedule, unlock the screen (if necessary) and touch
Dismiss.
To select additional options, Touch an option.
●
Snooze to silence the alarm and schedules it to replay again in 10 minutes.
●
View to display the event detail screen.
View Events
1. Touch
> Main Menu > (slide the screen up) > Tools > Calendar.
2. Touch the day for which you would like to view events.
Tip:
In the calendar view, days with events scheduled are underlined.
3. Touch List or #Events. Your phone lists events in chronological order.
4. Touch an event to list its details.
Erase Events
You can erase a day's events as well as past events or all events on your phone's calendar.
Tools and Calendar
87
Erasing a day's events
1. Touch
> Main Menu > (slide the screen up) > Tools > Calendar.
2. Touch the day for which you would like to erase events and then touch List or #
Events.
Tip:
In calendar view, days with events scheduled are underlined.
3. Touch Delete at the top right of the screen and select Delete Today.
4. Select Delete or Cancel.
Note: If the day for which you are erasing events contains a repeating event, you will receive
the following prompt: “There are some recurring events. Do you want to delete?” Select
Yes to erase a all occurrences or No to cancel the deletion of the repeating event.
Erase Past Events
To delete events scheduled before a specific time and date:
1. Touch
> Main Menu > (slide the screen up) > Tools > Calendar > Delete >
Delete Old.
2. Select the option to erase events older than One day, One week, One month, or One
year. You will see a message informing you how many events were erased.
Erase All Events
1. Touch
> Main Menu > (slide the screen up) > Tools > Calendar > Delete >
Delete All. You will see an alert notifying you that all events will be erased.
2. Select Delete to erase all events or Cancel to return to the calendar view.
Bluetooth
Bluetooth is a short-range communications technology that allows you to connect wirelessly to a
number of Bluetooth devices, such as headsets and hands-free car kits, and Bluetooth-enabled
handhelds, computers, printers, and wireless phones. The Bluetooth communication range is
usually up to approximately 30 feet.
Turn Bluetooth On and Off
Bluetooth Settings
Pair Bluetooth Devices
Send Items via Bluetooth
Tools and Calendar
88
Turn Bluetooth On and Off
By default, your device’s Bluetooth feature is set to Off. Turning Bluetooth on makes your phone
“discoverable” by other in-range Bluetooth devices.
To turn Bluetooth on:
1. Touch
> Main Menu > (slide the screen up) > Tools > Bluetooth.
2. Touch and slide the Bluetooth switch to ON to enable Bluetooth.
To turn Bluetooth off:
1. Touch
> Main Menu > (slide the screen up) > Tools > Bluetooth.
2. Touch and slide the Bluetooth switch to OFF to disable Bluetooth.
Bluetooth Status Indicators
The following icons show your Bluetooth connection status at a glance:
– Bluetooth is active (Hidden).
– Bluetooth is active (Visible).
– Bluetooth is connected.
– A Bluetooth mono or stereo headset is connected.
– A Bluetooth stereo speaker is connected.
Bluetooth Settings
You can set up many of the characteristics of your phone’s Bluetooth service, including:
●
Entering or changing the name your phone uses for Bluetooth communication
●
Setting your phone’s visibility (or “discoverability”) for other Bluetooth devices
●
Displaying your phone’s Bluetooth address
To access the Bluetooth Settings menu:
1. Touch
> Main Menu > (slide the screen up) > Tools > Bluetooth.
2. Ensure that Bluetooth is turned on. (See To turn Bluetooth on:.)
Tools and Calendar
89
3. Set your Bluetooth options.

Select Visibility > Hidden, Visible for 3 min, or Always Visible to set your
Bluetooth visibility.

Select My Bluetooth Info to display your phone's Bluetooth profiles and address.
Touch Edit Name to rename your phone for Bluetooth.
Pair Bluetooth Devices
The Bluetooth pairing process allows you to establish trusted connections between your phone
and another Bluetooth device. When you pair devices, they share a passkey, allowing for fast,
secure connections while bypassing the discovery and authentication process.
To pair your phone with another Bluetooth device:
1. Touch
> Main Menu > (slide the screen up) > Tools > Bluetooth > Add New.
Your phone will display a list of discovered in-range Bluetooth devices.
2. Touch a device, enter the passkey, and touch Save.
Note: Due to different specifications and features of other Bluetooth-compatible devices,
display and operations may be different, and functions such as transfer or exchange
may not be possible with all Bluetooth-compatible devices.
Send Items via Bluetooth
Depending on your paired devices’ settings and capabilities, you may be able to send pictures,
Contacts information, or other items using a Bluetooth connection.
1. Touch
> Main Menu > (slide the screen up) > Tools > Bluetooth > Trusted
Devices.
2. Touch a paired device to transfer to.
3. Touch an item and touch Done.

To select Contacts, pictures, or videos, select the category, scroll through the
available items, and touch items to send. When you are finished, touch Continue or
Done.
4. Touch Send to send the item(s).
Update Phone
The update phone option allows you to download and update the software in your phone
automatically.
Tools and Calendar
90
Update Firmware
Only the internal software is updated when you use the Update Firmware tool. No Contacts
entries or other information saved to your phone will be deleted.
1. Touch
> Main Menu > (slide the screen up) > Tools > Update Phone > Update
Firmware.
2. Follow the on-screen instructions.
Update the PRL
This option allows you to download and update the PRL (preferred roaming list) automatically.
1. Touch
PRL.
> Main Menu > (slide the screen up) > Tools > Update Phone > Update
2. Follow the on-screen instructions.
Mass Storage
Your phone's mass storage capabilities allow you to use a microSD card to expand the phone's
available memory space.
Your Phone’s microSD Card and Adapter
microSD Adapter
Format Memory Card
Memory Info
File Manager
Connect Your Phone to Your Computer
Your Phone’s microSD Card and Adapter
Your phone is able to use a microSD™ (Secure Digital) memory card to expand the phone’s
available memory space. It allows you to store more images, videos, music, and other files in
your phone.
Tools and Calendar
91
Insert the microSD Card
1. Use the fingertip cutout at the bottom of the back cover to lift and remove it.
2. Locate the microSD card slot, position the microSD card facing up and then gently
slide it into place until it is fully inserted and locked.
Note: Be sure to use only recommended microSD cards (32MB–16GB). Using nonrecommended microSD cards could cause data loss and damage your phone.
Remove the microSD Card
1. Use the fingertip cutout at the bottom of the back cover to lift and remove it.
2. Locate the microSD card slot and push in to release the microSD card.
3. Pull the microSD card out of the microSD card slot.
Note: You can easily damage the microSD card and its adapter by improper operation. Please
be careful when inserting, removing, or handling them.
DO NOT remove a microSD card while files are being accessed or transferred. Doing so
can result in loss or damage of data.
Make sure your battery is fully charged before using the microSD card. Your data may
become damaged or unusable if the battery runs out while using the microSD card.
microSD Adapter
The microSD adapter allows you to use microSD cards in other SD-compatible devices, like
computers, cameras, and printers. Before using the microSD card with an SD-compatible
device, you will need to insert the microSD card into the microSD adapter.
To insert the microSD card into the microSD adapter:
Tools and Calendar
92
► With the label side of the microSD card facing up, insert the card into a microSD
adapter, and gently slide the card until it is fully inserted.
To remove the microSD card from the microSD adapter:
► Hold the front edge of the microSD card, and gently pull it out to remove it from the
adapter.
Write Protection
The microSD adapter has a built-in Write Protection lock to prevent accidental overwriting or
removal of your data when the microSD card and adapter are inserted in another device.
► Slide the Write Protection lock tab down into the “Lock” position to prevent overwriting of
data. To allow data to be added or removed from the microSD card, slide the Write
Protection lock tab up into the normal position.
Format Memory Card
Formatting a microSD card (memory card) permanently removes all files stored on the card.
1. With the microSD card inserted, touch
> Main Menu > (slide the screen up) >
Tools > Mass Storage > Format Memory Card. A warning will be displayed.
2. If you are sure you wish to remove all the files from your microSD card, touch Yes.
Memory Info
You can view how much memory is being used and is available on your microSD card.
► With the microSD card inserted, touch
> Main Menu > (slide the screen up) > Tools
> Mass Storage > Memory Info. The used and available memory space will be
displayed.
Note: The formatting procedure erases all the data on the microSD card, after which the files
CANNOT be retrieved. To prevent the loss of important data, please check the contents
before you format the card.
File Manager
File Manager allows you to manage files such as pictures, videos, music, and applications
stored on the microSD™ card.
Access File Manager
► Touch
> Main Menu > (slide the screen up) > Tools > Mass Storage > File
Manager.
Tools and Calendar
93
Open Files in File Manager
1. Touch
> Main Menu > (slide the screen up) > Tools > Mass Storage > File
Manager.
2. Touch a folder.
3. Touch a file to open it, if the format is supported.
File Manager Options
When you open a folder, touch More. The following options are available.
●
Create New Folder to create a new folder. Enter a new folder name and touch Save.
(See Create folders in the microSD Card.)
●
Create New Folder to create a new folder.
●
Rename Current Folder to change the name of the current folder.
●
Delete Current Folder to delete the current folder.
●
Folder Info to display information about the folder such as folder name, location, the
number of files, and the number of sub folders.
Note: Default folders cannot be deleted or renamed.
Create and Use Folders in the microSD Card
With your phone's mass storage capabilities and file manager tool, you can create and use
default folders for storing files in your microSD card.
To create folders in the microSD card:
1. With the microSD card inserted, touch
Tools > Mass Storage > File Manager.
> Main Menu > (slide the screen up) >
2. Touch More and select Create New Folder. The phone will automatically create the
microSD’s default folders: DCIM, MUSIC, EMAIL, BLUETOOTH, SOUND, brew.
3. Enter a folder name and touch Save.
To display your microSD card folders:
Compatible files stored in your microSD are accessible through your microSD card folders.
1. With the microSD card inserted, touch
Tools > Mass Storage > File Manager.
> Main Menu > (slide the screen up) >
2. Touch a folder (for example DCIM, MUSIC, EMAIL, BLUETOOTH, SOUND or brew).
Tools and Calendar
94
3. To view or play a file, touch it or the appropriate key.
Note: For information on file and folder options available through File Manager, see File
Manager.
Connect Your Phone to Your Computer
Before using your phone’s mass storage capabilities, you need to prepare your phone’s settings
to synchronize with your desktop or laptop computer. Once you have connected the phone to
the computer, you can transfer your data to or from the microSD card.
1. With the microSD card inserted, connect your phone to your computer using a
compatible USB cable.
2. The USB Connection menu should open automatically; select Connect To PC. If the
menu doesn’t open, then touch
> Main Menu > (slide the screen up) > Tools >
Mass Storage > Connect to PC.
3. Read the notice and touch Yes.
To remove the connection:
► When you have finished transferring data, press
and touch Yes. After the message
that your device is disconnected, it is safe to remove the USB cable.
Important Connection Information
●
No driver installation is required for Windows 2000/ ME/XP/Vista/7 users.
●
To avoid loss of data, DO NOT remove the USB cable, the microSD card, or the battery
while files are being accessed or transferred.
●
DO NOT use your computer to change or edit folder or file names on the microSD card,
and do not attempt to transfer large amounts of data from the computer to the microSD
card. Doing so may cause the microSD card to fail.
●
DO NOT turn off or restart your computer, or put it into standby mode, while using a
mass storage device. Doing so will result in loss or damage of data.
●
While you are connected to the computer, your phone’s screen will display “Phone Off.”
You cannot make or receive calls.
●
If you connect a mass storage device to a peripheral device, your device may not work
properly.
Tools and Calendar
95
Voice Service
The Voice Services available on your phone include Automatic Speech Recognition (ASR)
capabilities and a Voice Memo tool that allows you to record notes to yourself, and to record
phone calls.
Automatic Speech Recognition (ASR)
Voice Reader
Voice Memos
Settings & Info
Automatic Speech Recognition (ASR)
You can use your phone’s built-in automatic speech recognition (ASR) software to dial a phone
number in your Contacts or to launch phone functions. All you have to do is to talk into the
phone and ASR will recognize your voice and complete tasks by itself.
Activate ASR
► From the standby screen, press and hold
.
The screen displays seven voice command options and the phone prompts you to say the name
of the command you want to use. To complete your task, simply follow the voice prompts.
Available ASR commands include:
●
Call [Name] [Type] / [Number] to call an entry in your Contacts list or a spoken phone
number. (See Make a Voice Call With ASR.)
●
Send Msg to [Name] [Type] / [Number] to send a message to an entry in your
Contacts list or to a spoken phone number.
●
Find [Name] [Type] to find a Contact entry.
●
Go to [Menu] to jump directly to menu items or applications. (See Open Menus With
ASR.)
●
Check [Item] to check your phone’s status. (See Check Phone Status Using ASR.)
●
Voice Command Training to train the Voice Command function for better voice
command recognition.
●
Exit Voice Command to exit the Voice Command function.
Tip:
Use ASR in a quiet environment so it can accurately recognize your commands.
Tools and Calendar
96
Make a Voice Call With ASR
1. Press and hold
.
2. After you hear “Please say a command”, say “Call”.
3. When you hear “Please say name & phone type or say number” say a name and
phone type or a phone number.
4. Your request will be repeated and you will be asked to verify. Say “Yes” to call the
number or person. (The number will automatically be dialed.) Say “No” if you wish to
cancel.
Tip:
You can skip step 3 saying a name and location after “Call” without pausing (for
example, “Call John Jones mobile”).
Note: If ASR does not recognize the name or number, it will find the most likely matches and
display a list of up to four names or numbers. You will hear “Did you say…” followed by
the name or number. You can confirm by saying “Yes.” Say “No” to skip to the next
match.
Open Menus With ASR
You can jump directly to some of the menu items or applications by saying “Go to” followed by a
menu option.
1. Press and hold
.
2. If you hear “Please say a command,” say “Go To.”
3. If you hear “Please choose,” say an application name (for example, “Messaging”).
4. The phone opens the selected menu.
Check Phone Status Using ASR
You can use ASR to obtain information about your phone:
●
Phone Status
●
Time
●
Signal Strength
●
Battery
1. Press and hold
.
2. Say “Check” after you hear “Please” say a command.”
Tools and Calendar
97
3. Say one of the options (above) when prompted.
Voice Command Training
You can train ASR for better voice command recognition.
1. Press and hold
.
2. Touch Voice Command Training.

Digit to train numbers.

Yes/No to train word-based commands.

Cancel to cancel and return to the Voice Command menu.
Voice Reader
The phone can read out the menus and alert you by voice if you turn the Voice Guide option on.
Set the voice reader options to view or hear the phone’s status.
To activate the voice guide:
1. Touch
> Main Menu > (slide the screen up) > Tools > Voice Service > Voice
Reader > Voice Guide.
2. Touch and slide each option's button to ON.

Alert to turn on the voice guide for alert.

Reader to turn on the voice guide for reader.
Voice Memos
Use your phone’s Voice Memo feature to record brief memos to remind you of important events,
phone numbers, or grocery list items, or to record a conversation during a phone call.
Record Voice Memos
1. Touch
> Main Menu > (slide the screen up) > Tools > Voice Service > Voice
Memo > Record.
2. Begin recording after the prompt.
To end the recording of your memo:
► Touch Stop.
To record a conversation during a phone call:
Tools and Calendar
98
► During a call, touch More > Voice Memo. A minute counter is displayed on the top left
corner of the screen to indicate the amount of time recorded.
To end the recording of your conversation:
► Touch the counter and the recording will stop.
Note: Your phone can store 30 voice memos with up to a total of 10 minutes for all memos.
Voice Memo Options
To play the voice memos you have recorded:
1. Touch
Memo.
> Main Menu > (slide the screen up) > Tools > Voice Service > Voice
2. Touch the voice memo you wish to hear.
To choose voice memo options:
1. Touch
Memo.
> Main Menu > (slide the screen up) > Tools > Voice Service > Voice
2. Find a voice memo and touch
to choose from the voice memo options:

Send Message to send a message with the voice memo attached.

Set As to assign as a ringer to Contacts with Default Ringer, One Contact,
Unsaved Numbers, Private/Unknown, Voicemail, Messages, or Alarm/ Calendar.

View Details to view the selected voice memo information.

Edit Title to edit the selected voice memo title.

Memory Info to view the memory status for voice memo. The total memory for voice
memo is 10 minutes.

Cancel to close the options menu.
Erase Voice Memos
To delete voice memos:
1. Touch
Memo.
> Main Menu > (slide the screen up) > Tools > Voice Service > Voice
2. Touch Delete at the top right corner of the screen and select Delete Multiple or
Delete All.

Delete Multiple to delete more than one selected memo at a time.
Tools and Calendar
99

Delete All to delete all voice memos.
Settings & Info
You can select an option of whether to hear the voice command and voice guide over the
phone's speaker or not. And you can also view the help document of Voice Service.
To set to hear the voice command and voice guide over phone's speaker:
1. Touch
& Info.
> Main Menu > (slide the screen up) > Tools > Voice Service > Settings
2. Touch and slide the Set Speaker button to ON.
Calculator
Your phone comes with a calculator that has a stopwatch, a world clock, a Unit Converter, and
an EZ Tip Calculator.
1. Touch
> Main Menu > (slide the screen up) > Tools > (slide the screen up) >
Calculator > Calculator.
2. Enter numbers using your keypad.

Touch
to enter decimal points.

Touch
to change the value from positive to negative. After entering a negative
number, touch

Touch
3. Touch
.
to clear all numbers.
to calculate the total.
Stopwatch
Your phone comes with a stopwatch.
1. Touch
> Main Menu > (slide the screen up) > Tools > Clock > Stopwatch.
2. Touch Start to start the timer.

While measuring time, touch Lap to record lap times.

Touch Stop to stop the stopwatch.
World Clock
You can view the time in over 50 different locations.
Tools and Calendar
100
1. Touch
> Main Menu > (slide the screen up) > Tools > Clock > World Clock.
2. Touch New City to display the map.
Note: You can search a city from the cities list. Touch
the city name.
, touch the search field and enter
3. Touch
or
to scroll through continents and touch
Cities in the continent will be displayed.
4. Touch
or
to select the continent.
to scroll through cities and touch
.
Touch and drag the map to find a city, and touch
.
– or –
Unit Converter
The Unit Converter tool converts currency, length, area, mass, volume, temperature, or velocity.
1. Touch
> Main Menu > (slide the screen up) > Tools > (slide the screen up) >
Calculator > Unit Converter.
2. Select Currency, Length, Area, Mass, Volume, Temperature, or Velocity.
3. Select the known unit type and enter the value. The conversion is displayed
automatically.
Tip:
While converting temperatures, touch the +/- key on the touch keypad to input negative
temperatures.
EZ Tip Calculator
The EZ Tip tool makes it easy to calculate a tip based on the total bill.
1. Touch
> Main Menu > (slide the screen up) > Tools > (slide the screen up) >
Calculator > Ez Tip Calculator.
2. Touch the Total Bill field and enter the amount of the total bill.
3. Touch the Tip (%) field and enter a tip percentage. The EZ Tip Calculator instantly
calculates the correct tip.
4. If you’re splitting the check, touch the Split field and enter the number of people in
your party. The EZ Tip Calculator calculates and displays the ‘per person’ amount.
Tools and Calendar
101
Notepad
Your phone comes with a notepad that you can use to compose and store reminders and notes
to help keep you organized.
To compose a note:
1. Touch
> Main Menu > (slide the screen up) > Tools > (slide the screen up) >
Notepad > Add New.
2. Enter your note using the touch keypad or QWERTY keyboard and touch Save.
To read a saved note:
1. Touch
> Main Menu > (slide the screen up) > Tools > (slide the screen up) >
Notepad.
2. Touch a note.
To delete a saved note:
1. Touch
> Main Menu > (slide the screen up) > Tools > (slide the screen up) >
Notepad.
2. Touch a note.
3. Touch Delete. (A confirmation will be displayed.)
4. Touch Delete.
Note: To delete multiple or all notes, touch Delete at the top right corner of the Notepad entries
screen.
Document Viewer
You can view all various document types, such as: Word, PowerPoint, Excel and PDF.
(Compatible file extensions are .doc, .docx, .ppt, .pptx, .xls, .xlsx, .pdf and .txt.)
To transfer document files:
1. Connect your phone and your computer using a compatible USB cable. (See Connect
Your Phone to Your Computer.)
2. Select Connect To PC.
3. Read the disclaimer and touch Yes.
4. Drag and drop document files from your computer into a folder.
5. When you are finished, disconnect the phone. (See To remove the connection:.)
Tools and Calendar
102
To view a document:
1. Touch
> Main Menu > (slide the screen up) > Tools > (slide the screen up) >
Document Viewer.
2. Touch a document.
Tools and Calendar
103
Index
3-Way Call, 32
911, 27
Abbreviated Dialing, 30
ABC Mode, 18
Accounts and Messaging, 64
Activate Service, 3
Activate Your Phone, 3
Activating Your Phone, 3
Add Contacts, 55
Adding a Number to a Contacts Entry, 57
Airplane Mode, 49
Alarm
Ringers, 43
Alarm Clock, 85
Answering Calls, 26
Applications, 69
Download, 69
ASR, 96
Assigning Speed Dial Numbers, 58
Auto-Answer Mode, 47
Automatic Speech Recognition, 96
Backlight, 37
Battery, 8
Charge, 10
Install, 2, 9
Remove, 9
Bluetooth, 88
Pairing, 90
Sending Items, 90
Settings, 89
Turn On and Off, 89
Brightness, 37
Browser Menu, 73
Calculator, 100
Calendar, 86
Erase Events, 87
Event Alert Menu, 87
Ringers, 43
Call Alerts
Ringers, 43
Index
104
Call Forwarding, 32
Call Guard, 52
Call History, 33
Call Waiting, 32
Callback Number, 65
Caller ID, 31
Calls
Abbreviated Dialing, 30
Emergency Numbers, 27
In-Call Options, 28
Making Calls, 24
Making From Contacts, 30
Making From History, 34
Missed Call Notification, 27
Plus Code Dialing, 31
Receiving Calls, 25
Setup, 47
Speed Dialing, 31
Camcorder
Recording Videos, 78
Video Mode Options, 79
Video Settings, 80
Camera, 75
Mode Options, 76
Settings, 78
Take Pictures, 75
Timer, 76
Zoom, 76
Charge the Battery, 10
Charger, 8
Clock, 37
Contacts, 55
Add a Number, 57
Adding, 55
Assign Pictures, 59
Assign Ringers, 42
Assign Speed Dial Numbers, 58
Edit Numbers, 57
Editing, 57
Entry Options, 56
Find a Number, 29
Find Entries, 60
Groups, 59
Making Calls, 30
Index
105
Picture ID, 38
Save a Phone Number, 56
Secret Entries, 61
Select Ringers, 59
Contacts Match Dialing, 30
Data
Settings, 49
Data Roam Guard, 52
Data Services
Get Started, 71
User Name, 71
Dialing Options, 25
Display Screen
Status Bar, 13
Display Settings, 36, 37
Document Viewer, 102
Download
Games, Ringers, Applications, 69
E911, 27
Editing a Contacts Entry, 57
Editing a Contacts Entry’s Numbers, 57
Email, 67
Accessing, 67
Setup, 67
Emergency Numbers, 27
Enhanced 911, 27
Enter Text, 16
ABC Mode, 18
Handwriting, 20
Input Mode, 16
Numbers, Symbols, Emoticons, 19
Predictive Text Input, 17
Preset Messages, 19
Quick Composer, 40
QWERTY Keyboard, 20
Entering Text, 16
Entertainment, 69
Erase History, 35
Erasing History, 35
EZ Tip Calculator, 101
EZ Tips, 101
Facebook, 68
File Manager, 93
Font Size, 39
Index
106
Games
Download, 69
Group, 59
Handwriting, 20
Headset Mode, 50
Hello UI, 61
History, 33
Erase, 35
Making a Call, 34
Prepending a Number, 34
Saving a Number, 34
History Options, 33
Home Menu, 11
In-Call Options, 28
Key Functions, 5
Keyboard
Illustration, 6
Menu Navigation, 12
Language, 50
Location Settings, 50
Lock Code, 45
Lock Phone, 45
Making a Call From History, 34
Managing Voice Memos, 100
Mass Storage, 91
Memory Card, 91
Format, 93
Menu Navigation, 11
Back Up, 13
Keyboard, 12
Touchscreen, 11
Menus
Phone Info, 45
Messages
Access Text/MMS Messages, 65
Callback Number, 65
Compose Text/MMS, 64
Email, 67
Email Setup, 67
MMS, 64
Picture Mail, 82
Preset Messages, 65
Ringers, 43
Send Pictures, 83
Index
107
Sending via Bluetooth, 90
Settings, 65
Social Networking, 68
Text Messaging, 64
microSD Adapter, 92
microSD card, 91
microSD Card
Format, 93
Missed Call Notification, 27
MMS, 64
Navigating Through the Menus, 11
Navigation
Navigate the Web, 72
Phone Menus, 11
Net Guard, 49
Notepad, 102
Pairing Bluetooth Devices, 90
Parental Controls, 46
Pauses, 29
Phone
Activation, 3
Basics, 4
Charge, 10
Connect to Computer, 95
Dialing Options, 25
Illustration, 1
Illustration (rear), 7
Making Calls, 24
Overview Illustration, 4
Phone Info Menu, 45
Receiving Calls, 25
Reset, 53
Setup, 2
Turn On and Off, 7
Update, 90
Update Firmware, 91
Update PRL, 91
Phone Number
Display, 45
Finding, 29
Prepending From History, 34
Saving, 29
Saving From History, 34
With Pauses, 29
Index
108
Picture ID, 38
Picture Mail, 82
Sending, 82
Pictures
Additional Settings, 83
Assign to Contact or Screensaver, 76
Assign to Contacts, 59
Picture ID, 38
Send From Messaging, 83
Sending, 82
Storing, 80
Take Pictures, 75
Plus Code Dialing, 31
Power
Turn Phone On and Off, 7
Power Save Mode, 39
Predictive Text Input, 17
Prepending a Number From History, 34
Preset Messages, 19, 65
PRL (Preferred Roaming List), 91
Profile
Update, 50
Quick Composer, 40
QWERTY Keyboard, 20
Illustration, 6
Recording Videos, 78
Reset Phone, 53
Ringer
Volume, 40
Ringers, 41
Alarm, 43
Assign to Contacts, 42, 59
Calendar, 43
Call Alerts, 43
Download, 69
Get New, 42
Incoming Calls, 42
Messages, 43
Power On/Off, 44
Voicemail, 43
Roaming, 51
Call Guard, 52
Data Roam Guard, 52
Set Mode, 51
Index
109
Save a Phone Number, 29
Saving a Phone Number, 56
Screen Savers, 37
Secret Contacts Entries, 61
Security Settings, 45
Settings, 36
Bluetooth, 89
Call Setup, 47
Camera, 78
Data, 49
Display, 36
Headset Mode, 50
Language, 50
Lock, 45
Messages, 65
Parental Controls, 46
Power Save Mode, 39
Ringers, 41
Silence All, 44
TTY, 48
Vibrate, 44
Video, 80
Voice Services, 100
Volume, 40
Whisper Notification, 40
Silence All, 44
Social Networking, 68
Speed Dial
Assign Contacts, 58
Speed Dialing, 31
Status Bar, 13
Stopwatch, 100
Storage, 91
Storing Pictures and Videos, 80
Text Entry, 16
ABC Mode, 18
Handwriting, 20
Numbers, Symbols, Emoticons, 19
Predictive Text Input, 17
Preset Messages, 19
QWERTY Keyboard, 20
Text Entry Settings, 45
Text Input Mode, 16
Text Messaging, 64
Index
110
Access Messages, 65
Compose Messages, 64
Tip Calculator, 101
Touchscreen, 11
Menu Navigation, 11
TTY Settings, 48
Twitter, 68
Typing, 16
Unit Converter, 101
Update
Phone, 90
Phone Firmware, 91
PRL, 91
Update Profile, 50
Updating the PRL, 91
USB
Connect to Computer, 95
Vibrate, 44
Video, 75
Mode Options, 79
Recording, 78
Settings, 80
Storing, 80
Viewing History, 33
Voice Memos, 98
Voice Reader, 98
Voice Services, 96
Settings, 100
Voicemail, 21
Alerts and Notification, 22
Retrieve, 22
Ringers, 43
Setup, 3, 21
Volume, 40
Key Beeps, 41
Playback, 41
Power On/Off, 41
Ringer, 40
Web
Launch Connection, 71
Navigation, 72
Web and Data Services, 71
Whisper Notification, 40
World Clock, 100
Index
111
Your Phone, 4
Zoom, 76
Index
112
Download PDF
Similar pages